Commit Graph

41 Commits

Author SHA1 Message Date
Felipe Balbi
436841d53d usb: dwc3: debugfs: slightly improve output of trb_ring
Instead of printing out enqueue and dequeue pointer value as a header
to the output, let's mark the TRBs in question with 'E' and 'D'. The
output looks slightly easier to read.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-06-02 11:22:28 +03:00
Roger Quadros
41ce1456e1 usb: dwc3: core: make dwc3_set_mode() work properly
We can't have both Host and Peripheral roles active at the same time
because of one detail on DWC3: it shares the same memory area for both
Host and Peripheral registers.

When swapping roles we must reinitialize the new role every
time. Let's make sure this works for our debugfs interface.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-04-11 10:58:30 +03:00
Roger Quadros
b202c42cbf usb: dwc3: debugfs: remove unnecessary | operator
Each role is mutually exclusive, the | operator is unnecessary. Remove
it.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-04-11 10:58:30 +03:00
Felipe Balbi
b5c7ed5cca usb: dwc3: expose dwc3_trb_type_string()
That helper can be used from our tracepoint interface with very minor
edits. Let's do so.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-04-11 10:58:26 +03:00
Felipe Balbi
90abb425d9 usb: dwc3: debugfs: return strings that match tracepoints
In order to improve usability a tiny bit, we will return strings that
match what our tracepoints return.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-04-11 10:58:26 +03:00
Felipe Balbi
26c9f3e391 usb: dwc3: debugfs: make use of dwc3_gadget_link_string()
Instead of redecoding link state into a string, use our helper.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-04-11 10:58:26 +03:00
Felipe Balbi
2df301cd3d usb: dwc3: debugfs: downcase OTG on 'mode' file
When writing, we expect the "otg" string. When showing, we return
"OTG". Let's downcase that word to avoid confusion.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-04-11 10:58:25 +03:00
Bryan O'Donoghue
47d3946ea2 usb: dwc3: refactor gadget endpoint count calculation
- DWC_USB3_NUM indicates the number of Device mode single directional
  endpoints, including OUT and IN endpoint 0.

- DWC_USB3_NUM_IN_EPS indicates the maximum number of Device mode IN
  endpoints active at any time, including control endpoint 0.

It's possible to configure RTL such that DWC_USB3_NUM_EPS is equal to
DWC_USB3_NUM_IN_EPS.

dwc3-core calculates the number of OUT endpoints as DWC_USB3_NUM minus
DWC_USB3_NUM_IN_EPS. If RTL has been configured with DWC_USB3_NUM_IN_EPS
equal to DWC_USB3_NUM then dwc3-core will calculate the number of OUT
endpoints as zero.

For example a from dwc3_core_num_eps() shows:
[    1.565000]  /usb0@f01d0000: found 8 IN and 0 OUT endpoints

This patch refactors the endpoint calculation down to one variable
dwc->num_eps taking care to maintain the current mapping of endpoints for
fixed FPGA configurations as described in Table 4-7 of version 2.60a of the
DWC USB3 databook.

The endpoint mapping will then be EP-OUT, EP-IN etc, up to DWC_USB3_NUM.
If DWC_USB3_NUM is odd then OUT will take the extra endpoint.

Suggested-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-04-11 10:58:18 +03:00
William Wu
475c8beb35 usb: dwc3: add DWC3_GUCTL1 reg for debug
GUCTL1 reg has some useful functions which can be
written by user. For rockchip platform, we set
GUCTL1.DEV_FORCE_20_CLK_FOR_30_CLK (bit26, applicable
for the core is programmed to operate in 2.0 device
only) to 1 in bootrom, and after start the kernel,
we want to check whether this bit can be reset to
default 0 after the core reset. Dump GUCTL1 reg from
debugfs is more convenient for us.

Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-20 12:32:46 +03:00
Felipe Balbi
2eb8801650 usb: dwc3: gadget: add a pointer to endpoint registers
By adding a pointer to endpoint registers' base
address, we can avoid using our controller-wide
struct dwc3 pointer for everything. At some point
this will allow us to have per-endpoint locks which
will, in turn, let us queue requests to separate
endpoints in parallel.

Because of this change our debugfs interface and io
accessors need to be changed accordingly.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-20 12:32:35 +03:00
Greg Kroah-Hartman
ce15bda101 usb: changes for v4.7 merge window
Here's the big USB Gadget pull request. This time
 not as large as usual with only 57 non-merge
 commits.
 
 The most important part here is, again, all the work
 on dwc3. This time around we're treating all
 endpoints (except for control endpoint) exactly the
 same. They all have the same amount of TRBs on the
 ring, they all treat the ring as an actual ring with
 a link TRB pointing to the head, etc.
 
 We're also helping the host side burst (on
 SuperSpeed GEN1 or GEN2 at least) for as long as
 possible until the endpoint returns NRDY.
 
 Other than this big TRB ring rework on dwc3, we also
 have a dwc3-omap DMA initialization fix, some extra
 debugfs files to aid in some odd debug sessions and
 a complete removal of our FIFO resizing logic.
 
 We have a new quirk for some dwc3 P3 quirk in some
 implementations.
 
 The rest is basically non-critical fixes and the
 usual cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXIek2AAoJEIaOsuA1yqRE2+cP/iZzzRshn6atj4b0BaRzyk6k
 acK6YNs8pBgJMt9FaVWhDOlCfa/8hg5W+6Z5Ovpx4WPyJdZbYkoxJ0ZJGKYjYZ/y
 U8hUxpTJ2s2wZKXRKchzT90hQvNlHdg3u2okP2GK0Oa17/idcQf2w1+0Cscm/dqN
 Ur5HgukLe31/MrcPr49OuLkahSPfHUQlOn8i4AZyBTh9L8ouzKDCvzUt2ABoCRLE
 wPcMegJhks7FQ5fksXtLsfqhqAoHpYHlsZQcH35iV8wPdtSueAtZ8tS6t445XbX9
 vEsFq1ovpBMYfl/dwV6RBZiQTjZiGWaIdjOZMUcpbD03yXE2IC6l+mtE/wuhlnHu
 J0Rr4YmfS4g++J1+380NQGoreOBZ2u7pujQ4TAy399zsLD8LR3zOQK5IErILSfpO
 m6p3ElkGuAyHJKmo4CysSspXnnNGBp/fuTkYdPM9IJRJCe0YwnF/zsQd0OrNZ/Pm
 39f6woE2aBQaEzdn+3Nya9B2IWYi6SIheQXPg0HETX/hujZHJv1x758VO6+c7aeq
 nlhRlxSe8u8DKryBG43+F+myHaIz1p0Y2O3MzIlvRv0yw87QevJ4pAWptdMITaMh
 YpgSjDPw5y2z91AhK/Fv+AXswKaoWBc6EEzBirW6hQWllSp+7qWloA6vYXkdHDr7
 QajUBeXzNgXF8JfIos5H
 =7szP
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: changes for v4.7 merge window

Here's the big USB Gadget pull request. This time
not as large as usual with only 57 non-merge
commits.

The most important part here is, again, all the work
on dwc3. This time around we're treating all
endpoints (except for control endpoint) exactly the
same. They all have the same amount of TRBs on the
ring, they all treat the ring as an actual ring with
a link TRB pointing to the head, etc.

We're also helping the host side burst (on
SuperSpeed GEN1 or GEN2 at least) for as long as
possible until the endpoint returns NRDY.

Other than this big TRB ring rework on dwc3, we also
have a dwc3-omap DMA initialization fix, some extra
debugfs files to aid in some odd debug sessions and
a complete removal of our FIFO resizing logic.

We have a new quirk for some dwc3 P3 quirk in some
implementations.

The rest is basically non-critical fixes and the
usual cleanups.
2016-04-28 09:32:39 -07:00
Felipe Balbi
818ec3aba8 usb: dwc3: debugfs: dump out endpoint details
There's a bunch of information in the debug register
set from dwc3 which is useful in some debugging
scenarios. Let's dump them out in endpoint-specific
directories and designated files.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-19 11:11:57 +03:00
Du, Changbin
4e9f311833 usb: dwc3: make dwc3_debugfs_init return value be void
Debugfs init failure is not so important. We can continue our job on
this failure. Also no break need for debugfs_create_file call failure.

Signed-off-by: Du, Changbin <changbin.du@intel.com>

[felipe.balbi@linux.intel.com :
	- remove out-of-memory message, we get that from OOM.
	- switch dev_err() to dev_dbg() ]

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-19 11:11:53 +03:00
Du, Changbin
e6bdf8195b usb: dwc3: fix memory leak of dwc->regset
dwc->regset is allocated on dwc3_debugfs_init, and should
be released on init failure or dwc3_debugfs_exit. Btw,
The line "dwc->root = NULL" is unnecessary, so remove it.

Signed-off-by: Du, Changbin <changbin.du@intel.com>

[ felipe.balbi@linux.intel.com : add another err label for the new
	error condition ]

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-18 12:35:18 +03:00
Felipe Balbi
5945f789c8 usb: dwc3: switch to GPL v2 only
This is a Linux-only driver which makes use
of GPL-only symbols. It makes no sense to
maintain Dual BSD/GPL licensing for this driver.

Considering that the amount of work to use this
driver in any different operating system would likely
be as large as developing the driver from scratch and
considering that we depend on GPL-only symbols, we
will switch over to a GPL v2-only license.

Cc: Anton Tikhomirov <av.tikhomirov@samsung.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29 13:56:44 +03:00
George Cherian
d4436c3a6e usb: dwc3: core: fix wrong OTG event regitser offset
This patch fixes the wrong OTG_EVT,OTG_EVTEN and OTG_STS register
offsets.

While at that, also add a missing register to debugfs regdump
utility.

Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:18:13 +02:00
Felipe Balbi
dbfff05d7c usb: dwc3: debugfs: improve debugfs file creation
when commit 388e5c5 (usb: dwc3: remove dwc3
dependency on host AND gadget.) changed the
way debugfs files are created, it failed to
note that 'mode' is necessary in Dual Role
mode only while 'testmode' and 'link_state'
are valid in Dual Role and Peripheral-only
builds. Fix this while also converting pre-
processor conditional to C conditionals.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:17:15 +02:00
Felipe Balbi
4ec0ddb1b4 usb: dwc3: debugfs: mark our regset structure const
nobody should be modifying that structure and
debugfs has already being fixed to take const
arguments, so we won't cause any new compile
warnings.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:17:14 +02:00
Felipe Balbi
5b9ec339e4 usb: dwc3: debugfs: when unknown, print only the state value
whenever we grab an unknown link_state we
were printing the entire register value as
a integer but that's hardly useful; instead,
let's print only the bogus state value.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:17:14 +02:00
Felipe Balbi
6b2a0eb854 usb: dwc3: debugfs: add two missing Link States
for Reset and Resume we were going to print
"UNKNOWN" when we actually knew what those
were.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:17:13 +02:00
Vivek Gautam
388e5c5113 usb: dwc3: remove dwc3 dependency on host AND gadget.
DWC3 controller curretly depends on USB && USB_GADGET.
Some hardware may like to use only host feature on dwc3,
or only gadget feature.

So, removing this dependency of USB_DWC3 on USB and USB_GADGET.
Adding the mode of operaiton of DWC3 also here
HOST/GADGET/DUAL_ROLE based on which features are enabled.

[ balbi@ti.com :
	. make sure we have default modes for all possible Kernel
		configurations.
	. Remove the config -> menuconfig change as it's unnecessary
	. switch over to IS_ENABLED() ]

CC: Doug Anderson <dianders@chromium.org>
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18 14:55:55 +02:00
Felipe Balbi
d7668024b3 usb: dwc3: debugfs: convert our regdump to use regsets
regset is a generic implementation of regdump
utility through debugfs.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18 10:21:34 +02:00
Jack Pham
1604c1e760 usb: dwc3: debugfs: fix regdump offset
As with dwc_readl/writel, the global registers are specified as
offsets starting from the beginning of the xHCI address space,
but the memory region pointed to by dwc->regs already maps to
the start of the global addresses. Fix by offsetting each of the
regs relative to DWC3_GLOBALS_REGS_START.

Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-12-13 11:58:38 +02:00
Bill Pemberton
fb4e98ab63 usb: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Cc: Li Yang <leoli@freescale.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 13:27:17 -08:00
Bill Pemberton
41ac7b3ab7 usb: remove use of __devinit
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Cc: Li Yang <leoli@freescale.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Olav Kongas <ok@artecdesign.ee>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 13:27:16 -08:00
Gerard Cauvy
090725431b usb: dwc3: debugfs: fix off by one when entering testmode
When implementing the USB2 testmode support via debugfs,
Felipe has committed a mistake when counting the number
of letters of some of the strings, resulting on an off
by one error which prevented some of the Test modes to
be entered properly.

This patch, fixes that mistake.

Signed-off-by: Gerard Cauvy <g-cauvy1@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-10 12:14:53 +02:00
Felipe Balbi
3d4c0d4ffb usb: dwc3: debugfs: fix error check
debugfs APIs will return NULL if it fails
to create the file/directory we ask it to
create.

Instead of checking for IS_ERR(ptr) we must
check for !ptr.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-06 11:48:41 +02:00
Felipe Balbi
138801aaa5 usb: dwc3: gadget: allow Link state changes via debugfs
This is very useful for low level link testing where
we might not have a USB Host stack, only a scope to
verify signal integrity.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-06 11:48:25 +02:00
Felipe Balbi
080d921fe7 usb: dwc3: gadget: allow testmodes changes via debugfs
This is very useful for low level Link Testing where
we might not have a USB Host stack, only a scope to
verify signal integrity.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-06 11:48:22 +02:00
Linus Torvalds
55b81e6f27 Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (232 commits)
  USB: Add USB-ID for Multiplex RC serial adapter to cp210x.c
  xhci: Clean up 32-bit build warnings.
  USB: update documentation for usbmon
  usb: usb-storage doesn't support dynamic id currently, the patch disables the feature to fix an oops
  drivers/usb/class/cdc-acm.c: clear dangling pointer
  drivers/usb/dwc3/dwc3-pci.c: introduce missing kfree
  drivers/usb/host/isp1760-if.c: introduce missing kfree
  usb: option: add ZD Incorporated HSPA modem
  usb: ch9: fix up MaxStreams helper
  USB: usb-skeleton.c: cleanup open_count
  USB: usb-skeleton.c: fix open/disconnect race
  xhci: Properly handle COMP_2ND_BW_ERR
  USB: remove dead code from suspend/resume path
  USB: add quirk for another camera
  drivers: usb: wusbcore: Fix dependency for USB_WUSB
  xhci: Better debugging for critical host errors.
  xhci: Be less verbose during URB cancellation.
  xhci: Remove debugging about ring structure allocation.
  xhci: Remove debugging about toggling cycle bits.
  xhci: Remove debugging for individual transfers.
  ...
2012-01-09 12:09:47 -08:00
Felipe Balbi
8becf27044 usb: dwc3: fix sparse errors
sparse caught three mistakes on this driver,
fix them:

drivers/usb/dwc3/ep0.c:806:29: warning: duplicate const
drivers/usb/dwc3/debugfs.c:481:15: warning: symbol 'dwc3_debugfs_init' \
	was not declared. Should it be static?
drivers/usb/dwc3/debugfs.c:518:16: warning: symbol 'dwc3_debugfs_exit' \
	was not declared. Should it be static?

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:29 +02:00
Felipe Balbi
25b8ff68bf usb: dwc3: fix few coding style problems
There were a few coding style issues with this driver
which are now fixed:

drivers/usb/dwc3/debugfs.c:48: WARNING: Use #include \
	<linux/uaccess.h> instead of <asm/uaccess.h>
drivers/usb/dwc3/debugfs.c:484: ERROR: space required \
	before the open brace '{'
drivers/usb/dwc3/ep0.c:261: WARNING: line over 80 characters
drivers/usb/dwc3/ep0.c:287: WARNING: suspect code indent \
	for conditional statements (16, 23)
drivers/usb/dwc3/gadget.c:749: WARNING: line over 80 characters
drivers/usb/dwc3/gadget.c:1267: WARNING: line over 80 characters
drivers/usb/dwc3/gadget.h:116: WARNING: line over 80 characters
drivers/usb/dwc3/io.h:42: WARNING: Use #include \
	<linux/io.h> instead of <asm/io.h>

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:29 +02:00
Sebastian Andrzej Siewior
3140e8cbfe usb: dwc3: use a helper function for operation mode setting
There are two where need to set operational mode:
- during initialization while we decide to run in host,device or DRD
  mode
- at runtime via the debugfs interface.

This patch provides a new function which sets the operational mode and
moves its initialiation to the mode switch instead in the gadget code
itself.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:26 +02:00
Sebastian Andrzej Siewior
c5537ea531 usb: dwc3: debugfs: hold the lock in during mode change
The read and write operation is atomic and we need no locking around
this operations. What we need however is a lock that is held which
ensures that the content of the DWC3_GCTL has not been changed. With
this, the conten may have been change changed after the first but before
our write back.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:19 +02:00
Felipe Balbi
0b9fe32dee usb: dwc3: debugfs: add support for changing port mode
This makes testing a lot easier when trying to
switch between host and device modes.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:15 +02:00
Alessandro Rubini
42b4d114b9 usb: dwc3: fix a warning
The previous patch left an unused variable, I apologize.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18 15:19:21 -08:00
Alessandro Rubini
c8d2a6f399 usb: dwc3: use debugfs_print_regs32()
This a use example of the regs32 utilities in debugfs, although
this fuse use ":" as separator between name and value, and debugs
uses "=" (as it looked to me a more common practice).

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18 11:46:32 -08:00
Sebastian Andrzej Siewior
49a25cc9a7 usb: dwc: remove "All rights reserved" statement.
Some people think that this line is not compatible with the GPL. The
statement was required due to the Buenos Aires Convention and is now
deprecated. I remove it because it is said that it is pointless nowdays.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-04 10:25:52 -07:00
Sebastian Andrzej Siewior
e7225315a8 usb: dwc3: debugfs: remove test mode interface
There are some issues around for enabling/disabling this mode and
handling it. It does not work perfectly (yet). However we have a few
gadgets tested successfuly so far. That means we are quite confident
that we won't need this in near future.
So I'm for removing it and bringing a working version back once there is
a need for it.

Thanks to Dan Carpenter who spotted the wrong memory handling here.

[ balbi@ti.com : made it actually apply ]

Cc: Dan Carpenter <error27@gmail.com>
Cc: wharms@bfs.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-09-09 13:02:08 +03:00
Dan Carpenter
b4f28a98ea usb: dwc3: debugfs: add a kfree() on error to dwc3_testmode_open()
We may as well fix this potential leak so we don't have to listen to
the static checkers complain.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-09-09 13:01:59 +03:00
Felipe Balbi
72246da40f usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.

Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.

The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.

More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.

While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.

[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-22 16:03:11 -07:00