The x86 implementation of range-to-target_node lookup (i.e.
phys_to_target_node() and memory_add_physaddr_to_nid()) relies on
numa_memblks.
Since numa_memblks are now part of the generic code, move these functions
from x86 to mm/numa_memblks.c and select CONFIG_NUMA_KEEP_MEMINFO when
CONFIG_NUMA_MEMBLKS=y for dax and cxl.
[rppt@kernel.org: fix build]
Link: https://lkml.kernel.org/r/ZtVfSt_zloPdDqVB@kernel.org
Link: https://lkml.kernel.org/r/20240807064110.1003856-26-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Zi Yan <ziy@nvidia.com> # for x86_64 and arm64
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [arm64 + CXL via QEMU]
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
cxl_setup_parent_dport() needs to get RCH dport AER capability address
from RCRB to disable AER interrupt. The function does not check if dport
is RCH dport, it will get a wrong pci_host_bridge structure by dport_dev
in VH case because dport_dev points to a pci device(RP or switch DSP)
rather than a pci host bridge device.
Fixes: f05fd10d13 ("cxl/pci: Add RCH downstream port AER register discovery")
Signed-off-by: Li Ming <ming4.li@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240809082750.3015641-2-ming4.li@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
New Changes:
- Refactor to a common struct for DRAM and general media CXL events
- Add abstract distance calculation support for CXL
- Add CXL maturity map documentation to detail current state of CXL enabling
- Add warning on mixed CXL VH and RCH/RCD hierachy to inform unsupported config
- Replace ENXIO with EBUSY for inject poison limit reached via debugfs
- Replace ENXIO with EBUSY for inject poison cxl-test support
- XOR math fixup for DPA to SPA translation. Current math works for MODULO arithmetic
where HPA==SPA, however not for XOR decode.
- Move pci config read in cxl_dvsec_rr_decode() to avoid unnecessary acess
Fixes:
- Add a fix to address race condition in CXL memory hotplug notifier
- Add missing MODULE_DESCRIPTION() for CXL modules
- Fix incorrect vendor debug UUID define
-----BEGIN PGP SIGNATURE-----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=HaEG
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"Core:
- A CXL maturity map has been added to the documentation to detail
the current state of CXL enabling.
It provides the status of the current state of various CXL features
to inform current and future contributors of where things are and
which areas need contribution.
- A notifier handler has been added in order for a newly created CXL
memory region to trigger the abstract distance metrics calculation.
This should bring parity for CXL memory to the same level vs
hotplugged DRAM for NUMA abstract distance calculation. The
abstract distance reflects relative performance used for memory
tiering handling.
- An addition for XOR math has been added to address the CXL DPA to
SPA translation.
CXL address translation did not support address interleave math
with XOR prior to this change.
Fixes:
- Fix to address race condition in the CXL memory hotplug notifier
- Add missing MODULE_DESCRIPTION() for CXL modules
- Fix incorrect vendor debug UUID define
Misc:
- A warning has been added to inform users of an unsupported
configuration when mixing CXL VH and RCH/RCD hierarchies
- The ENXIO error code has been replaced with EBUSY for inject poison
limit reached via debugfs and cxl-test support
- Moving the PCI config read in cxl_dvsec_rr_decode() to avoid
unnecessary PCI config reads
- A refactor to a common struct for DRAM and general media CXL
events"
* tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/pci: Move reading of control register to immediately before usage
cxl: Remove defunct code calculating host bridge target positions
cxl/region: Verify target positions using the ordered target list
cxl: Restore XOR'd position bits during address translation
cxl/core: Fold cxl_trace_hpa() into cxl_dpa_to_hpa()
cxl/test: Replace ENXIO with EBUSY for inject poison limit reached
cxl/memdev: Replace ENXIO with EBUSY for inject poison limit reached
cxl/acpi: Warn on mixed CXL VH and RCH/RCD Hierarchy
cxl/core: Fix incorrect vendor debug UUID define
Documentation: CXL Maturity Map
cxl/region: Simplify cxl_region_nid()
cxl/region: Support to calculate memory tier abstract distance
cxl/region: Fix a race condition in memory hotplug notifier
cxl: add missing MODULE_DESCRIPTION() macros
cxl/events: Use a common struct for DRAM and General Media events
Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases to
get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions. It's not all that useful for a "write a whole driver
in rust" type of thing, but the firmware bindings do help out the
phy rust drivers, and the driver core bindings give a solid base on
which others can start their work. There is still a long way to go
here before we have a multitude of rust drivers being added, but
it's a great first step.
- driver core const api changes. This reached across all bus types,
and there are some fix-ups for some not-common bus types that
linux-next and 0-day testing shook out. This work is being done to
help make the rust bindings more safe, as well as the C code, moving
toward the end-goal of allowing us to put driver structures into
read-only memory. We aren't there yet, but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZqH+aQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoOQCfVBdLcBjEDAGh3L8qHRGMPy4rV2EAoL/r+zKm
cJEYtJpGtWX6aAtugm9E
=ZyJV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
Relocate the reading of the DVSEC control register to immediately
before usage and avoid unnecessary PCI config access from the read
if DVSEC capability check, hdm_count check, or device validity check
results in failure.
Signed-off-by: Foryun Ma <foryun.ma@jaguarmicro.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240604032151.655-1-foryun.ma@jaguarmicro.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Series to fix XOR math for DPA to SPA translation
- Refactor and fold cxl_trace_hpa() into cxl_dpa_to_hpa()
- Complete DPA->HPA->SPA translation and correct XOR translation issue
- Add new method to verify a CXL target position
- Remove old method of CXL target position verifiation
The CXL Spec 3.1 Table 9-22 requires that the BIOS populate the CFMWS
target list in interleave target order. This means the calculations
the CXL driver added to determine positions when XOR math is in use,
along with the entire XOR vs Modulo call back setup is not needed.
A prior patch added a common method to verify positions.
Remove the now unused code related to the cxl_calc_hb_fn.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/2e2c32a2d0f1007e920b58712d15edad2e48d857.1719980933.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
When a root decoder is configured the interleave target list is read
from the BIOS populated CFMWS structure. Per the CXL spec 3.1 Table
9-22 the target list is in interleave order. The CXL driver populates
its decoder target list in the same order and stores it in 'struct
cxl_switch_decoder' field "@target: active ordered target list in
current decoder configuration"
Given the promise of an ordered list, the driver can stop duplicating
the work of BIOS and simply check target positions against the ordered
list during region configuration.
The simplified check against the ordered list is presented here.
A follow-on patch will remove the unused code.
For Modulo arithmetic this is not a fix, only a simplification.
For XOR arithmetic this is a fix for HB IW of 3,6,12.
Fixes: f9db85bfec ("cxl/acpi: Support CXL XOR Interleave Math (CXIMS)")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/35d08d3aba08fee0f9b86ab1cef0c25116ca8a55.1719980933.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
When a device reports a DPA in events like poison, general_media,
and dram, the driver translates that DPA back to an HPA. Presently,
the CXL driver translation only considers the Modulo position and
will report the wrong HPA for XOR configured root decoders.
Add a helper function that restores the XOR'd bits during DPA->HPA
address translation. Plumb a root decoder callback to the new helper
when XOR interleave arithmetic is in use. For Modulo arithmetic, just
let the callback be NULL - as in no extra work required.
Upon completion of a DPA->HPA translation a couple of checks are
performed on the result. One simply confirms that the calculated
HPA is within the address range of the region. That test is useful
for both Modulo and XOR interleave arithmetic decodes.
A second check confirms that the HPA is within an expected chunk
based on the endpoints position in the region and the region
granularity. An XOR decode disrupts the Modulo pattern making the
chunk check useless.
To align the checks with the proper decode, pull the region range
check inline and use the helper to do the chunk check for Modulo
decodes only.
A cxl-test unit test is posted for upstream review here:
https://lore.kernel.org/20240624210644.495563-1-alison.schofield@intel.com/
Fixes: 28a3ae4ff6 ("cxl/trace: Add an HPA to cxl_poison trace events")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Diego Garcia Rodriguez <diego.garcia.rodriguez@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/1a1ac880d9f889bd6384e657e810431b9a0a72e5.1719980933.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Although cxl_trace_hpa() is used to populate TRACE EVENTs with HPA
addresses the work it performs is a DPA to HPA translation not a
trace. Tidy up this naming by moving the minimal work done in
cxl_trace_hpa() into cxl_dpa_to_hpa() and use cxl_dpa_to_hpa()
for trace event callbacks.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/452a9b0c525b774c72d9d5851515ffa928750132.1719980933.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The CXL driver provides a debugfs interface offering users the
ability to inject and clear poison to a memdev. Once a user has
injected up to the devices limit further injection requests fail
with ENXIO until a clear poison is issued.
Users may not have device specs in hand or may want to intentionally
hit the limit and then clear. Replace the usual ENXIO return status
with EBUSY so users can recognize this failure.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://patch.msgid.link/825bd4c67fb55a4373c4182d999ad49d4e6b4fe7.1720316188.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Each Host Bridge instance has a corresponding CXL Host Bridge Structure
(CHBS) ACPI table that identifies its capabilities. CHBS tables can be
two types (CXL 3.1 Table 9-21): The PCIe Root Complex Register Block
(RCRB) and CXL Host Bridge Component Registers (CHBCR).
If a Host Bridge is attached to a device that is operating in Restricted
CXL Device Mode (RCD), BIOS publishes an RCRB with the base address of
registers that describe its capabilities (CXL 3.1 sec. 9.11).
Instead, the new (CXL 2.0+) Component registers can only be accessed
by means of a base address published with a CHBCR (CXL 3.1 sec. 9.12).
If an eRCD (a device that forces the host-bridge into CXL 1.1 Restricted
CXL Host mode) is attached to a CXL 2.0+ Host-Bridge, the current CXL
specification does not define a mechanism for finding CXL-2.0-only
root-port component registers like HDM decoders and Extended Security
capability.
An algorithm to locate a CHBCR associated with an RCRB, would be too
invasive to land without some concrete motivation.
Therefore, just print a message to inform of unsupported config.
Count how many different CHBS "Version" types are detected by
cxl_get_chbs_iter(). Then make cxl_get_chbs() print a warning if that sum
is greater than 1.
Tested-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Fabio M. De Francesco <fabio.m.de.francesco@linux.intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240628175535.272472-1-fabio.m.de.francesco@linux.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
When user send a mbox command whose opcode is CXL_MBOX_OP_CLEAR_LOG and
the in_payload is normal vendor debug log UUID according to
the CXL specification cxl_payload_from_user_allowed() will return
false unexpectedly, Sending mbox cmd operation fails and the kernel
log will print:
Clear Log: input payload not allowed.
All CXL devices that support a debug log shall support the Vendor Debug
Log to allow the log to be accessed through a common host driver, for any
device, all versions of the CXL specification define the same value with
Log Identifier of: 5e1819d9-11a9-400c-811f-d60719403d86
Refer to CXL spec r3.1 Table 8-71
Fix the definition value of DEFINE_CXL_VENDOR_DEBUG_UUID to match the
CXL specification.
Fixes: 472b1ce6e9 ("cxl/mem: Enable commands via CEL")
Signed-off-by: peng guo <engguopeng@buaa.edu.cn>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240710023112.8063-1-engguopeng@buaa.edu.cn
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The node ID of the region can be gotten via resource start address
directly. This simplifies the implementation of cxl_region_nid().
Signed-off-by: Huang Ying <ying.huang@intel.com>
Suggested-by: Alison Schofield <alison.schofield@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240618084639.1419629-4-ying.huang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
An abstract distance value must be assigned by the driver that makes
the memory available to the system. It reflects relative performance
and is used to place memory nodes backed by CXL regions in the appropriate
memory tiers allowing promotion/demotion within the existing memory tiering
mechanism.
The abstract distance is calculated based on the memory access latency
and bandwidth of CXL regions.
Signed-off-by: Huang, Ying <ying.huang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240618084639.1419629-3-ying.huang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In the memory hotplug notifier function of the CXL region,
cxl_region_perf_attrs_callback(), the node ID is obtained by checking
the host address range of the region. However, the address range
information is not available when the region is registered in
devm_cxl_add_region(). Additionally, this information may be removed
or added under the protection of cxl_region_rwsem during runtime. If
the memory notifier is called for nodes other than that backed by the
region, a race condition may occur, potentially leading to a NULL
dereference or an invalid address range.
The race condition is addressed by checking the availability of the
address range information under the protection of cxl_region_rwsem. To
enhance code readability and use guard(), the relevant code has been
moved into a newly added function: cxl_region_nid().
Fixes: 067353a46d ("cxl/region: Add memory hotplug notifier for cxl region")
Signed-off-by: Huang, Ying <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240618084639.1419629-2-ying.huang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/cxl/core/cxl_core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/cxl/cxl_pci.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/cxl/cxl_mem.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/cxl/cxl_acpi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/cxl/cxl_pmem.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/cxl/cxl_port.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240607-md-drivers-cxl-v2-1-0c61d95ee7a7@quicinc.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
cxl_event_common was an unfortunate naming choice and caused confusion with
the existing Common Event Record. Furthermore, its fields didn't map all
the common information between DRAM and General Media Events.
Remove cxl_event_common and introduce cxl_event_media_hdr to record common
information between DRAM and General Media events.
cxl_event_media_hdr, which is embedded in both cxl_event_gen_media and
cxl_event_dram, leverages the commonalities between the two events to
simplify their respective handling.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fabio.m.de.francesco@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240607144423.48681-1-fabio.m.de.francesco@linux.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add the missing files into cxl driver api and fix the compile warning.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Suggested-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240614084755.59503-3-yaoxt.fnst@fujitsu.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Since interleave capability is not verified, if the interleave
capability of a target does not match the region need, committing decoder
should have failed at the device end.
In order to checkout this error as quickly as possible, driver needs
to check the interleave capability of target during attaching it to
region.
Per CXL specification r3.1(8.2.4.20.1 CXL HDM Decoder Capability Register),
bits 11 and 12 indicate the capability to establish interleaving in 3, 6,
12 and 16 ways. If these bits are not set, the target cannot be attached to
a region utilizing such interleave ways.
Additionally, bits 8 and 9 represent the capability of the bits used for
interleaving in the address, Linux tracks this in the cxl_port
interleave_mask.
Per CXL specification r3.1(8.2.4.20.13 Decoder Protection):
eIW means encoded Interleave Ways.
eIG means encoded Interleave Granularity.
in HPA:
if eIW is 0 or 8 (interleave ways: 1, 3), all the bits of HPA are used,
the interleave bits are none, the following check is ignored.
if eIW is less than 8 (interleave ways: 2, 4, 8, 16), the interleave bits
start at bit position eIG + 8 and end at eIG + eIW + 8 - 1.
if eIW is greater than 8 (interleave ways: 6, 12), the interleave bits
start at bit position eIG + 8 and end at eIG + eIW - 1.
if the interleave mask is insufficient to cover the required interleave
bits, the target cannot be attached to the region.
Fixes: 384e624bb2 ("cxl/region: Attach endpoint decoders")
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240614084755.59503-2-yaoxt.fnst@fujitsu.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
cxl_dpa_to_region() looks up a region based on a memdev and DPA.
It wrongly assumes an endpoint found mapping the DPA is also of
a fully assembled region. When not true it leads to a null pointer
dereference looking up the region name.
This appears during testing of region lookup after a failure to
assemble a BIOS defined region or if the lookup raced with the
assembly of the BIOS defined region.
Failure to clean up BIOS defined regions that fail assembly is an
issue in itself and a fix to that problem will alleviate some of
the impact. It will not alleviate the race condition so let's harden
this path.
The behavior change is that the kernel oops due to a null pointer
dereference is replaced with a dev_dbg() message noting that an
endpoint was mapped.
Additional comments are added so that future users of this function
can more clearly understand what it provides.
Fixes: 0a105ab28a ("cxl/memdev: Warn of poison inject or clear to a mapped region")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240604003609.202682-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
When CXL subsystem is auto-assembling a pmem region during cxl
endpoint port probing, always hit below calltrace.
BUG: kernel NULL pointer dereference, address: 0000000000000078
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
RIP: 0010:cxl_pmem_region_probe+0x22e/0x360 [cxl_pmem]
Call Trace:
<TASK>
? __die+0x24/0x70
? page_fault_oops+0x82/0x160
? do_user_addr_fault+0x65/0x6b0
? exc_page_fault+0x7d/0x170
? asm_exc_page_fault+0x26/0x30
? cxl_pmem_region_probe+0x22e/0x360 [cxl_pmem]
? cxl_pmem_region_probe+0x1ac/0x360 [cxl_pmem]
cxl_bus_probe+0x1b/0x60 [cxl_core]
really_probe+0x173/0x410
? __pfx___device_attach_driver+0x10/0x10
__driver_probe_device+0x80/0x170
driver_probe_device+0x1e/0x90
__device_attach_driver+0x90/0x120
bus_for_each_drv+0x84/0xe0
__device_attach+0xbc/0x1f0
bus_probe_device+0x90/0xa0
device_add+0x51c/0x710
devm_cxl_add_pmem_region+0x1b5/0x380 [cxl_core]
cxl_bus_probe+0x1b/0x60 [cxl_core]
The cxl_nvd of the memdev needs to be available during the pmem region
probe. Currently the cxl_nvd is registered after the endpoint port probe.
The endpoint probe, in the case of autoassembly of regions, can cause a
pmem region probe requiring the not yet available cxl_nvd. Adjust the
sequence so this dependency is met.
This requires adding a port parameter to cxl_find_nvdimm_bridge() that
can be used to query the ancestor root port. The endpoint port is not
yet available, but will share a common ancestor with its parent, so
start the query from there instead.
Fixes: f17b558d66 ("cxl/pmem: Refactor nvdimm device registration, delete the workqueue")
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Li Ming <ming4.li@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240612064423.2567625-1-ming4.li@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Move the mode verification to __create_region() before allocating the
memregion to avoid the memregion leaks.
Fixes: 6e09926418 ("cxl/region: Add volatile region creation support")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20240507053421.456439-1-lizhijian@fujitsu.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
-----BEGIN PGP SIGNATURE-----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=xjoS
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
since there's no requirement to describe them in E820 and some
platforms require ECAM to work (Bjorn Helgaas)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
Le Moal)
- Remove last user and pci_enable_device_io() (Heiner Kallweit)
- Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)
- Skip waiting for devices that have been disconnected while
suspended (Ilpo Järvinen)
- Clear Secondary Status errors after enumeration since Master Aborts
and Unsupported Request errors are an expected part of enumeration
(Vidya Sagar)
MSI:
- Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)
Error handling:
- Mask Genesys GL975x SD host controller Replay Timer Timeout
correctable errors caused by a hardware defect; the errors cause
interrupts that prevent system suspend (Kai-Heng Feng)
- Fix EDR-related _DSM support, which previously evaluated revision 5
but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)
ASPM:
- Simplify link state definitions and mask calculation (Ilpo
Järvinen)
Power management:
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
apparently doesn't know how to put them back in D0 (Mario
Limonciello)
CXL:
- Support resetting CXL devices; special handling required because
CXL Ports mask Secondary Bus Reset by default (Dave Jiang)
DOE:
- Support DOE Discovery Version 2 (Alexey Kardashevskiy)
Endpoint framework:
- Set endpoint BAR to be 64-bit if the driver says that's all the
device supports, in addition to doing so if the size is >2GB
(Niklas Cassel)
- Simplify endpoint BAR allocation and setting interfaces (Niklas
Cassel)
Cadence PCIe controller driver:
- Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)
Cadence PCIe endpoint driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
Freescale Layerscape PCIe controller driver:
- Convert DT binding to YAML (Frank Li)
MediaTek MT7621 PCIe controller driver:
- Add DT binding missing 'reg' property for child Root Ports
(Krzysztof Kozlowski)
- Fix theoretical string truncation in PHY name (Sergio Paracuellos)
NVIDIA Tegra194 PCIe controller driver:
- Return success for endpoint probe instead of falling through to the
failure path (Vidya Sagar)
Renesas R-Car PCIe controller driver:
- Add DT binding missing IOMMU properties (Geert Uytterhoeven)
- Add DT binding R-Car V4H compatible for host and endpoint mode
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
- Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)
- Set the Subsystem Vendor ID, which was previously zero because it
was masked incorrectly (Rick Wertenbroek)
Synopsys DesignWare PCIe controller driver:
- Restructure DBI register access to accommodate devices where this
requires Refclk to be active (Manivannan Sadhasivam)
- Remove the deinit() callback, which was only need by the
pcie-rcar-gen4, and do it directly in that driver (Manivannan
Sadhasivam)
- Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
up things like eDMA (Manivannan Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
to dw_pcie_ep_init() (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
reflect the actual functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from all the glue
drivers, not just those that require active Refclk from the host
(Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which was an obscure way for
glue drivers to indicate that they depend on Refclk from the host
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)
- Add DT binding J722S SoC support (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Add DT binding missing num-viewport, phys and phy-name properties
(Jan Kiszka)
Miscellaneous:
- Constify and annotate with __ro_after_init (Heiner Kallweit)
- Convert DT bindings to YAML (Krzysztof Kozlowski)
- Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
Zhou)"
* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
...
Topics:
- Add CXL log related mailbox commands
- Add Get Log Capabilities command
- Add Get Supported Log Sub-List Commands command
- Add Clear Log command
- Add series for HPA to DPA translation for CXL events cxl_dram and cxl_general_media
- Add support to send CPER records to CXL for more detailed parsing.
Misc changes and fixes:
- Fix for compile warning of cxl_security_ops
- Add debug message for invalid interleave granularity
- Enhancement to cxl-test event testing
- Add dev_warn() on unsupported mixed mode decoder
- Fix use of phys_to_target_node() for x86
- Use helper function for decoder enum instead of open coding
- Include missing headers for cxl-event
- Fix MAINTAINERS file entry
- Fix cxlr_pmem memory leak
- Cleanup __cxl_parse_cfmws via scope-based resource menagement
- Convert cxl_pmem_region_alloc() to scope-based resource management
-----BEGIN PGP SIGNATURE-----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=rCAo
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
- Three CXL mailbox passthrough commands are added to support the
populating and clearing of vendor debug logs:
- Get Log Capabilities
- Get Supported Log Sub-List Commands
- Clear Log
- Add support of Device Phyiscal Address (DPA) to Host Physical Address
(HPA) translation for CXL events of cxl_dram and cxl_general media.
This allows user space to figure out which CXL region the event
occured via trace event.
- Connect CXL to CPER reporting.
If a device is configured for firmware first, CXL event records are
not sent directly to the host. Those records are reported through EFI
Common Platform Error Records (CPER). Add support to route the CPER
records through the CXL sub-system in order to provide DPA to HPA
translation and also event decoding and tracing. This is useful for
users to determine which system issues may correspond to specific
hardware events.
- A number of misc cleanups and fixes:
- Fix for compile warning of cxl_security_ops
- Add debug message for invalid interleave granularity
- Enhancement to cxl-test event testing
- Add dev_warn() on unsupported mixed mode decoder
- Fix use of phys_to_target_node() for x86
- Use helper function for decoder enum instead of open coding
- Include missing headers for cxl-event
- Fix MAINTAINERS file entry
- Fix cxlr_pmem memory leak
- Cleanup __cxl_parse_cfmws via scope-based resource menagement
- Convert cxl_pmem_region_alloc() to scope-based resource management
* tag 'cxl-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits)
cxl/cper: Remove duplicated GUID defines
cxl/cper: Fix non-ACPI-APEI-GHES build
cxl/pci: Process CPER events
acpi/ghes: Process CXL Component Events
cxl/region: Convert cxl_pmem_region_alloc to scope-based resource management
cxl/acpi: Cleanup __cxl_parse_cfmws()
cxl/region: Fix cxlr_pmem leaks
cxl/core: Add region info to cxl_general_media and cxl_dram events
cxl/region: Move cxl_trace_hpa() work to the region driver
cxl/region: Move cxl_dpa_to_region() work to the region driver
cxl/trace: Correct DPA field masks for general_media & dram events
MAINTAINERS: repair file entry in COMPUTE EXPRESS LINK
cxl/cxl-event: include missing <linux/types.h> and <linux/uuid.h>
cxl/hdm: Debug, use decoder name function
cxl: Fix use of phys_to_target_node() for x86
cxl/hdm: dev_warn() on unsupported mixed mode decoder
cxl/test: Enhance event testing
cxl/hdm: Add debug message for invalid interleave granularity
cxl: Fix compile warning for cxl_security_ops extern
cxl/mbox: Add Clear Log mailbox command
...
Secondary Bus Reset (SBR) is equivalent to a device being hot removed and
inserted again. Doing a SBR on a CXL type 3 device is problematic if the
exported device memory is part of system memory that cannot be offlined.
The event is equivalent to violently ripping out that range of memory from
the kernel. While the hardware requires the "Unmask SBR" bit set in the
Port Control Extensions register and the kernel currently does not unmask
it, user can unmask this bit via setpci or similar tool.
The driver does not have a way to detect whether a reset coming from the
PCI subsystem is a Function Level Reset (FLR) or SBR. The only way to
detect is to note if a decoder is marked as enabled in software but the
decoder control register indicates it's not committed.
Add a helper function to find discrepancy between the decoder software
state versus the hardware register state.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20240502165851.1948523-6-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Move PCI_DVSEC_VENDOR_ID_CXL in CXL private code to PCI_VENDOR_ID_CXL in
pci_ids.h in order to be utilized in PCI subsystem.
While the CXL Vendor ID (0x1e98) is not listed in the PCI SIG "Member
Companies" database at https://pcisig.com/membership/member-companies, the
SIG has confirmed that it is reserved by CXL.
Link: https://lore.kernel.org/r/20240502165851.1948523-2-dave.jiang@intel.com
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Link: https://lore.kernel.org/linux-cxl/20240402172323.GA1818777@bhelgaas/
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[bhelgaas: update commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
If the firmware has configured CXL event support to be firmware first
the OS will receive those events through CPER records. The CXL layer has
unique DPA to HPA knowledge and existing event trace parsing in
place.[0]
Add a CXL CPER work item and register it with the GHES code to process
CPER events.
Link: http://lore.kernel.org/r/cover.1711598777.git.alison.schofield@intel.com [0]
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Link: https://lore.kernel.org/r/20240426-cxl-cper3-v4-2-58076cce1624@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
A recent bugfix to cxl_pmem_region_alloc() to fix an
error-unwind-memleak [1], highlighted a use case for scope-based resource
management.
Delete the goto for releasing @cxl_region_rwsem, and return error codes
directly from error condition paths.
The caller, devm_cxl_add_pmem_region(), is no longer given @cxlr_pmem
directly it must retrieve it from @cxlr->cxlr_pmem. This retrieval from
@cxlr was already in place for @cxlr->cxl_nvb, and converting
cxl_pmem_region_alloc() to return an int makes it less awkward to handle
no_free_ptr().
Cc: Li Zhijian <lizhijian@fujitsu.com>
Reported-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Closes: http://lore.kernel.org/r/20240430174540.000039ce@Huawei.com
Link: http://lore.kernel.org/r/20240428030748.318985-1-lizhijian@fujitsu.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/171451430965.1147997.15782562063090960666.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
As a follow on to the recent rework of __cxl_parse_cfmws() to always
return errors [1], use cleanup.h helpers to remove goto and other cleanups
now that logging is moved to the cxl_parse_cfmws() wrapper.
This ends up adding more code than it deletes, but __cxl_parse_cfmws()
itself does get smaller. The takeaway from the cond_no_free_ptr()
discussion [2] was to not add new macros to handle the cases where
no_free_ptr() is awkward, instead rework the code to have helpers and
clearer delineation of responsibility.
Now one might say that __free(del_cxl_resource) is excessive given it
is immediately registered with add_or_reset_cxl_resource(). The
rationale for keeping it is that it forces use of "no_free_ptr()" on the
argument passed to add_or_reset_cxl_resource(). That in turn makes it
clear that @res is NULL for the rest of the function which is part of
the point of the cleanup helpers, to turn subtle use after free errors
[3] into loud NULL pointer de-references.
Link: http://lore.kernel.org/r/170820177238.631006.1012639681618409284.stgit@dwillia2-xfh.jf.intel.com [1]
Link: http://lore.kernel.org/r/CAHk-=whBVhnh=KSeBBRet=E7qJAwnPR_aj5em187Q3FiD+LXnA@mail.gmail.com [2]
Link: http://lore.kernel.org/r/20230714093146.2253438-1-leitao@debian.org [3]
Reported-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Closes: http://lore.kernel.org/r/20240219124041.00002bda@Huawei.com
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/171235474028.2718248.14109646123143505522.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Before this error path, cxlr_pmem pointed to a kzalloc() memory, free
it to avoid this memory leaking.
Fixes: f17b558d66 ("cxl/pmem: Refactor nvdimm device registration, delete the workqueue")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240428030748.318985-1-lizhijian@fujitsu.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
User space may need to know which region, if any, maps the DPAs
(device physical addresses) reported in a cxl_general_media or
cxl_dram event. Since the mapping can change, the kernel provides
this information at the time the event occurs. This informs user
space that at event <timestamp> this <region> mapped this <DPA>
to this <HPA>.
Add the same region info that is included in the cxl_poison trace
event: the DPA->HPA translation, region name, and region uuid.
The new fields are inserted in the trace event and no existing
fields are modified. If the DPA is not mapped, user will see:
hpa=ULLONG_MAX, region="", and uuid=0
This work must be protected by dpa_rwsem & region_rwsem since
it is looking up region mappings.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/dd8d708b7a7ebfb64a27020a5eb338091336b34d.1714496730.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
This work belongs in the region driver as it is only useful with
CONFIG_CXL_REGION. Add a stub in core.h for when the region driver
is not built.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/183222631f11a43c5e6debc42ec22fe1bd4b818a.1714496730.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
This helper belongs in the region driver as it is only useful
with CONFIG_CXL_REGION. Add a stub in core.h for when the region
driver is not built.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/05e30f788d62b3dd398aff2d2ea50a6aaa7c3313.1714496730.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The length of Physical Address in General Media and DRAM event
records is 64-bit, so the field mask for extracting the DPA should
be 64-bit also, otherwise the trace event reports DPA's with the
upper 32 bits of a DPA address masked off. If users do DPA-to-HPA
translations this could lead to incorrect page retirement decisions.
Use GENMASK_ULL() for CXL_DPA_MASK to get all the DPA address bits.
Tidy up CXL_DPA_FLAGS_MASK by using GENMASK() to only mask the exact
flag bits.
These bits are defined as part of the event record physical address
descriptions of General Media and DRAM events in CXL Spec 3.1
Section 8.2.9.2 Events.
Fixes: d54a531a43 ("cxl/mem: Trace General Media Event Record")
Co-developed-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/2867fc43c57720a4a15a3179431829b8dbd2dc16.1714496730.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The decoder enum has a name conversion function defined now.
Use that instead of open coding.
Suggested-by: Navneet Singh <navneet.singh@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230604-dcd-type2-upstream-v2-1-f740c47e7916@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The CXL driver uses both functions phys_to_target_node() and
memory_add_physaddr_to_nid(). The x86 architecture relies on the
NUMA_KEEP_MEMINFO kernel option enabled for both functions to work
correct. Update Kconfig to make sure the option is always enabled for
the driver.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Link: http://lore.kernel.org/r/65f8b191c0422_aa222941b@dwillia2-mobl3.amr.corp.intel.com.notmuch
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20240424154756.2152614-1-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
A mixed mode decoder is programmed with device physical addresses
that span both ram and pmem partitions of a memdev.
Linux does not support mixed mode decoders. The driver rejects
sysfs writes that try to set decoder mode to mixed, and if a
resource bieng allocated is not wholly contained in either the
pmem or ram partition of a memdev, it is also rejected. Basically,
the CXL region driver is not going to create regions with mixed
mode decoders, but the BIOS could.
If the kernel driver sees the mixed mode decoder, it will fail to
enable the region, and emit a dev_dbg() message.
A dev_dbg() is not noisy enough in this case. Change the message
to be a dev_warn() that explicitly says mixed mode is not supported.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230218013834.31237-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
There's no debug message for invalid interleave granularity. This
makes it hard to debug related bugs. So, this is added in this patch.
Signed-off-by: Huang, Ying <ying.huang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240402061016.388408-1-ying.huang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Jonathan reported he has observed compiler warning when using running with
W=1 C=1 for cxl_security_ops that is declared as an extern in cxl/pmem.c.
Move to cxl.h to make it visible to all cxl sources.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/linux-cxl/167771196186.3285982.18283746206612049722.stgit@djiang5-mobl3.local/
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Adding UAPI support for CXL r3.1 8.2.9.5.4
Clear Log command.
This proposed patch will be useful for clearing and populating
the Vendor debug log in certain scenarios, allowing for the
aggregation of results over time.
Signed-off-by: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240313071218.729-3-sthanneeru.opensrc@micron.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Robert reported the following when booting a CXL host with Restricted CXL
Host (RCH) topology:
[ 39.815379] cxl_acpi ACPI0017:00: not a cxl_port device
[ 39.827123] WARNING: CPU: 46 PID: 1754 at drivers/cxl/core/port.c:592 to_cxl_port+0x56/0x70 [cxl_core]
... plus some related subsequent NULL pointer dereference:
[ 40.718708] BUG: kernel NULL pointer dereference, address: 00000000000002d8
The iterator to walk the PCIe path did not account for RCH topology.
However RCH does not support hotplug and the memory exported by the
Restricted CXL Device (RCD) should be covered by HMAT and therefore no
access_coordinate is needed. Add check to see if the endpoint device is
RCD and skip calculation.
Also add a call to cxl_endpoint_get_perf_coordinates() in cxl_test in order
to exercise the topology iterator. The dev_is_pci() check added is to help
with this test and should be harmless for normal operation.
Reported-by: Robert Richter <rrichter@amd.com>
Closes: https://lore.kernel.org/all/Ziv8GfSMSbvlBB0h@rric.localdomain/
Fixes: 592780b839 ("cxl: Fix retrieving of access_coordinates in PCIe path")
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20240426224913.1027420-1-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
A recent change to cxl_mem_get_records_log() [1] highlighted a subtle
nuance of looping calls to cxl_internal_send_cmd(), i.e. that
cxl_internal_send_cmd() modifies the 'size_out' member of the @mbox_cmd
argument. That mechanism is useful for communicating underflow, but it
is unwanted when reusing @mbox_cmd for a subsequent submission. It turns
out that cxl_xfer_log() avoids this scenario by always redefining
@mbox_cmd each iteration.
Update cxl_mem_get_records_log() and cxl_mem_get_poison() to follow the
same style as cxl_xfer_log(), i.e. re-define @mbox_cmd each iteration.
The cxl_mem_get_records_log() change is just a style fixup, but the
cxl_mem_get_poison() change is a potential fix, per Alison [2]:
Poison list retrieval can hit this case if the MORE flag is set and
a follow on read of the list delivers more records than the previous
read. ie. device gives one record, sets the _MORE flag, then gives 5.
Not an urgent fix since this behavior has not been seen in the wild,
but worth tracking as a fix.
Cc: Kwangjin Ko <kwangjin.ko@sk.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Fixes: ed83f7ca39 ("cxl/mbox: Add GET_POISON_LIST mailbox command")
Link: http://lore.kernel.org/r/20240402081404.1106-2-kwangjin.ko@sk.com [1]
Link: http://lore.kernel.org/r/ZhAhAL/GOaWFrauw@aschofie-mobl2 [2]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/171235441633.2716581.12330082428680958635.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
- Fix index of Clear Event Record handles in cxl_clear_event_record().
- Fix use before init of map->reg_type in cxl_decode_regblock().
- Fix initialization of mbox_cmd.size_out in cxl_mem_get_records_log().
- Series fixing CXL path access_coordinate computation.
- Remove unneded check of iter in loop.
- Fix of retrieving of access_coordinate in PCI topology walk.
- Fix of incorrect region access_coordinate data calculation.
- Consolidate of access_coordinates attached to downstream port
context.
- Add check to validate access_coordinate validity to prevent
incorrect data being exposed via sysfs.
-----BEGIN PGP SIGNATURE-----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=SGRd
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dave Jiang:
- Fix index of Clear Event Record handles in cxl_clear_event_record()
- Fix use before init of map->reg_type in cxl_decode_regblock()
- Fix initialization of mbox_cmd.size_out in cxl_mem_get_records_log()
- Fix CXL path access_coordinate computation:
- Remove unneded check of iter in loop
- Fix of retrieving of access_coordinate in PCI topology walk
- Fix of incorrect region access_coordinate data calculation
- Consolidate of access_coordinates attached to downstream port
context
- Add check to validate access_coordinate validity to prevent
incorrect data being exposed via sysfs
* tag 'cxl-fixes-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Add checks to access_coordinate calculation to fail missing data
cxl: Consolidate dport access_coordinate ->hb_coord and ->sw_coord into ->coord
cxl: Fix incorrect region perf data calculation
cxl: Fix retrieving of access_coordinates in PCIe path
cxl: Remove checking of iter in cxl_endpoint_get_perf_coordinates()
cxl/core: Fix initialization of mbox_cmd.size_out in get event
cxl/core/regs: Fix usage of map->reg_type in cxl_decode_regblock() before assigned
cxl/mem: Fix for the index of Clear Event Record Handle
