Now that we know the actual word clock, we can:
- Put the resulting rate into the hardware info
- At 44.1 kHz word clock shift the rate for the pitch calculations,
which presume a 48 kHz word clock
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230612191325.1315854-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The value isn't used yet; the subsequent commits will do that.
This ignores the existence of rates above 48 kHz, which is fine, as the
hardware will just switch to the fallback clock source when fed with a
rate which is incompatible with the base clock multiplier, which
currently is always x1.
The sample rate display in /proc spdif-in is adjusted to reflect our
understanding of the input rates.
This is tested only with an 0404b card without sync card, so there is a
lot of room for improvement.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230612191325.1315854-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The actually available clock sources depend on the available audio input
ports and dedicated clock input ports.
This includes refactoring the code to be data-driven to remain
manageable.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230612191325.1315854-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far, we set the fallback as a side effect of setting the source. But
the fallback makes no sense at all when an internal clock is selected.
Defaulting to 48k for S/PDIF & ADAT makes sense, but as that is the
global default and we're not changing it automatically any more, it's
just fine to leave it entirely to the explicit setting.
This changes the name of the pre-existing control to something more
appropriate (regardless of the split), so users will need to adjust
their mixer settings.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230612191325.1315854-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As the updated MIDI 2.0 spec has been published freshly, this is a
catch up to add the support for new specs, especially UMP v1.1
features, on Linux kernel.
The new UMP v1.1 introduced the concept of Function Blocks (FB), which
is a kind of superset of USB MIDI 2.0 Group Terminal Blocks (GTB).
The patch set adds the support for FB as the primary information
source while keeping the parse of GTB as fallback. Also UMP v1.1
supports the groupless messages, the protocol switch, static FBs, and
other new fundamental features, and those are supported as well.
Link: https://www.midi.org/midi-articles/details-about-midi-2-0-midi-ci-profiles-and-property-exchange
Link: https://lore.kernel.org/r/20230612081054.17200-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
UMP v1.1 supports the protocol switch via a UMP Stream message. When
it's received, we need to take care of the midi_version field in the
corresponding sequencer client, too.
This patch introduces a new ops to notify the protocol change to
snd_seq_ump_ops for handling it.
Link: https://lore.kernel.org/r/20230612081054.17200-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch implements the handling of the dynamic update of FB info.
When the FB info update is received after the initial parsing, it
means the dynamic FB info update. We compare the result, and if the
actual update is detected, it's notified via a new ops,
notify_fb_change, to the sequencer client, and the corresponding
sequencer ports are updated accordingly.
Link: https://lore.kernel.org/r/20230612081054.17200-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The UMP Utility and Stream messages are "groupless", i.e. an incoming
groupless packet should be sent only to the UMP EP port, and the event
with the groupless message is sent to UMP EP as is without the group
translation per port.
Also, the former reserved bit 0 for the client group filter is now
used for groupless events. When the bit 0 is set, the groupless
events are filtered out and skipped.
Link: https://lore.kernel.org/r/20230612081054.17200-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the basic support for UMP Endpoint and UMP Function
Block parsing, which are extended in the new UMP v1.1 spec.
The patch provides a new helper function to perform the query of the
UMP Endpoint information and builds up the UMP blocks based on UMP
Function Block information. For the communication over the UMP
Endpoint, it opens the rawmidi device once internally, inquiries the
UMP Endpoint and Function Block info by sending new UMP Stream
messages, and waits for the response for each query.
The new UMP spec allows to update the FB info and change its
associated groups or its activeness on the fly, too. For catching it,
the UMP core keeps watching the incoming UMP messages, and
snd_ump_receive() handles the incoming UMP Stream messages to refresh
the FB info.
Link: https://lore.kernel.org/r/20230612081054.17200-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On loongson controller, after calling snd_hdac_stream_updateb()
to enable DMA engine, the SDnCTL.STRM will become to zero. We
need to access SDnCTL in dword to keep SDnCTL.STRM is not changed.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/27aeddf5ebbe7c69631cec0e489c1b264be94990.1686128807.git.siyanteng@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On loongson controller, RIRBSTS.RINTFL cannot be cleared,
azx_interrupt() is called all the time. We disable RIRB
interrupt, and use polling mode by default.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/d309a75424d438b958d90d797b4f1ba45468e090.1686128807.git.siyanteng@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Include the FX bus map, without which the already present send routing
info would require looking up the documentation.
- Include the physical I/O channels as known to the driver
- Make the multi-channel capture map actually name the mapped input
channels rather than "FXBUS" (Audigy) or even "???" (SbLive)
- The latter two are omitted for E-MU cards, as their physical I/O is
routed through the FPGA
- While at it, make the "Card" field somewhat more useful
This includes de-duplicating the label tables between emuproc and emufx,
updating/improving the FX bus label table, and making the SB Live! 5.1
multi-track capture channel mapping hack data-driven.
Tested-by: Jonathan Dowland <jon@dow.land>
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230526101659.437969-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Include the routing information, which can be actually read back.
Somewhat as a drive-by, make the register dump format less obscure - the
previous one made no sense at all.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230526101659.437969-6-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We use independent voices for the channels, so we need to make an effort
to ensure that they are actually in sync.
The hardware doesn't provide atomicity, so we may need to retry a few
times, due to NMIs, PCI contention, and the wrong phase of the moon.
Solution inspired by kX-project.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523200709.236023-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The #endif is placed obviously at a wrong position, which caused a
build error on the big endian machine.
Fixes: 0b5288f5fe ("ALSA: ump: Add legacy raw MIDI support")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20230524135448.3ecad334@canb.auug.org.au
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a (largish) patch set for adding the support of MIDI 2.0
functionality, mainly targeted for USB devices. MIDI 2.0 is a
complete overhaul of the 40-years old MIDI 1.0. Unlike MIDI 1.0 byte
stream, MIDI 2.0 uses packets in 32bit words for Universal MIDI Packet
(UMP) protocol. It supports both MIDI 1.0 commands for compatibility
and the extended MIDI 2.0 commands for higher resolutions and more
functions.
For supporting the UMP, the patch set extends the existing ALSA
rawmidi and sequencer interfaces, and adds the USB MIDI 2.0 support to
the standard USB-audio driver.
The rawmidi for UMP has a different device name (/dev/snd/umpC*D*) and
it reads/writes UMP packet data in 32bit CPU-native endianness. For
the old MIDI 1.0 applications, the legacy rawmidi interface is
provided, too.
As default, USB-audio driver will take the alternate setting for MIDI
2.0 interface, and the compatibility with MIDI 1.0 is provided via the
rawmidi common layer. However, user may let the driver falling back
to the old MIDI 1.0 interface by a module option, too.
A UMP-capable rawmidi device can create the corresponding ALSA
sequencer client(s) to support the UMP Endpoint and UMP Group
connections. As a nature of ALSA sequencer, arbitrary connections
between clients/ports are allowed, and the ALSA sequencer core
performs the automatic conversions for the connections between a new
UMP sequencer client and a legacy MIDI 1.0 sequencer client. It
allows the existing application to use MIDI 2.0 devices without
changes.
The MIDI-CI, which is another major extension in MIDI 2.0, isn't
covered by this patch set. It would be implemented rather in
user-space.
Roughly speaking, the first half of this patch set is for extending
the rawmidi and USB-audio, and the second half is for extending the
ALSA sequencer interface.
The patch set is based on 6.4-rc2 kernel, but all patches can be
cleanly applicable on 6.2 and 6.3 kernels, too (while 6.1 and older
kernels would need minor adjustment for uapi header changes).
The updates for alsa-lib and alsa-utils will follow shortly later.
The author thanks members of MIDI Association OS/API Working Group,
especially Andrew Mee, for great helps for the initial design and
debugging / testing the drivers.
Link: https://lore.kernel.org/r/20230523075358.9672-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch introduces a new ALSA sequencer client for the kernel UMP
object, snd-seq-ump-client. It's a UMP version of snd-seq-midi
driver, while this driver creates a sequencer client per UMP endpoint
which contains (fixed) 16 ports.
The UMP rawmidi device is opened in APPEND mode for output, so that
multiple sequencer clients can share the same UMP endpoint, as well as
the legacy UMP rawmidi devices that are opened in APPEND mode, too.
For input, on the other hand, the incoming data is processed on the
fly in the dedicated hook, hence it doesn't open a rawmidi device.
The UMP packet group is updated upon delivery depending on the target
sequencer port (which corresponds to the actual UMP group).
Each sequencer port sets a new port type bit,
SNDRV_SEQ_PORT_TYPE_MIDI_UMP, in addition to the other standard
types for MIDI.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-33-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Starting from this commit, we add the basic support of UMP (Universal
MIDI Packet) events on ALSA sequencer infrastructure. The biggest
change here is that, for transferring UMP packets that are up to 128
bits, we extend the data payload of ALSA sequencer event record when
the client is declared to support for the new UMP events.
A new event flag bit, SNDRV_SEQ_EVENT_UMP, is defined and it shall be
set for the UMP packet events that have the larger payload of 128
bits, defined as struct snd_seq_ump_event.
For controlling the UMP feature enablement in kernel, a new Kconfig,
CONFIG_SND_SEQ_UMP is introduced. The extended event for UMP is
available only when this Kconfig item is set. Similarly, the size of
the internal snd_seq_event_cell also increases (in 4 bytes) when the
Kconfig item is set. (But the size increase is effective only for
32bit architectures; 64bit archs already have padding there.)
Overall, when CONFIG_SND_SEQ_UMP isn't set, there is no change in the
event and cell, keeping the old sizes.
For applications that want to access the UMP packets, first of all, a
sequencer client has to declare the user-protocol to match with the
latest one via the new SNDRV_SEQ_IOCTL_USER_PVERSION; otherwise it's
treated as if a legacy client without UMP support.
Then the client can switch to the new UMP mode (MIDI 1.0 or MIDI 2.0)
with a new field, midi_version, in snd_seq_client_info. When switched
to UMP mode (midi_version = 1 or 2), the client can write the UMP
events with SNDRV_SEQ_EVENT_UMP flag. For reads, the alignment size
is changed from snd_seq_event (28 bytes) to snd_seq_ump_event (32
bytes). When a UMP sequencer event is delivered to a legacy sequencer
client, it's ignored or handled as an error.
Conceptually, ALSA sequencer client and port correspond to the UMP
Endpoint and Group, respectively; each client may have multiple ports
and each port has the fixed number (16) of channels, total up to 256
channels.
As of this commit, ALSA sequencer core just sends and receives the UMP
events as-is from/to clients. The automatic conversions between the
legacy events and the new UMP events will be implemented in a later
patch.
Along with this commit, bump the sequencer protocol version to 1.0.3.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-26-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Create a new variant of snd_seq_expand_var_event() for expanding the
data starting from the given byte offset. It'll be used by the new
UMP sequencer code later.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-19-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch extends the UMP core code to support the legacy MIDI 1.0
rawmidi devices. When the new kconfig CONFIG_SND_UMP_LEGACY_RAWMIDI
is set, the UMP core allows to attach an additional rawmidi device for
each UMP Endpoint. The rawmidi device contains 16 substreams where
each substream corresponds to a UMP Group belonging to the EP. The
device reads/writes the legacy MIDI 1.0 byte streams and translates
from/to UMP packets.
The legacy rawmidi devices are exclusive with the UMP rawmidi devices,
hence both of them can't be opened at the same time unless the UMP
rawmidi is opened in APPEND mode.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-15-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a code refactoring for abstracting the rawmidi access to the
UMP's own helpers. It's a preliminary work for the later code
refactoring of the UMP layer.
Until now, we access to the rawmidi substream directly from the
driver via rawmidi access helpers, but after this change, the driver
is supposed to access via the newly introduced snd_ump_ops and
receive/transmit via snd_ump_receive() and snd_ump_transmit() helpers.
As of this commit, those are merely wrappers for the rawmidi
substream, and no much function change is seen here.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-14-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
UMP devices may have more interesting information than the traditional
rawmidi. Extend the rawmidi_global_ops to allow the optional proc
info output and show some more bits in the proc file for UMP.
Note that the "Groups" field shows the first and the last UMP Groups,
and both numbers are 1-based (i.e. the first group is 1).
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the support helpers for UMP (Universal MIDI Packet) in
ALSA core.
The basic design is that a rawmidi instance is assigned to each UMP
Endpoint. A UMP Endpoint provides a UMP stream, typically
bidirectional (but can be also uni-directional, too), which may hold
up to 16 UMP Groups, where each UMP (input/output) Group corresponds
to the traditional MIDI I/O Endpoint.
Additionally, the ALSA UMP abstraction provides the multiple UMP
Blocks that can be assigned to each UMP Endpoint. A UMP Block is a
metadata to hold the UMP Group clusters, and can represent the
functions assigned to each UMP Group. A typical implementation of UMP
Block is the Group Terminal Blocks of USB MIDI 2.0 specification.
For distinguishing from the legacy byte-stream MIDI device, a new
device "umpC*D*" will be created, instead of the standard (MIDI 1.0)
devices "midiC*D*". The UMP instance can be identified by the new
rawmidi info bit SNDRV_RAWMIDI_INFO_UMP, too.
A UMP rawmidi device reads/writes only in 4-bytes words alignment,
stored in CPU native endianness.
The transmit and receive functions take care of the input/out data
alignment, and may return zero or aligned size, and the params ioctl
may return -EINVAL when the given input/output buffer size isn't
aligned.
A few new UMP-specific ioctls are added for obtaining the new UMP
endpoint and block information.
As of this commit, no ALSA sequencer instance is attached to UMP
devices yet. They will be supported by later patches.
Along with those changes, the protocol version for rawmidi is bumped
to 2.0.3.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A new callback, ioctl, is added to snd_rawmidi_global_ops for allowing
the driver to deal with the own ioctls. This is another preparation
patch for the upcoming UMP support.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_rawmidi_kernel_open() is used only internally from ALSA sequencer,
so far, and parsing the card / device matching table at each open is
redundant, as each sequencer client already gets the rawmidi object
beforehand.
This patch optimizes the path by passing the rawmidi object directly
at snd_rawmidi_kernel_open(). This is also a preparation for the
upcoming UMP rawmidi I/O support.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of separate voices, we now allocate non-interleaved channels,
which may in turn contain two interleaved voices each. The higher-level
code keeps only one pointer per channel. The channels are not allocated
in one block any more, as there is no reason to do that. As a
consequence of that, and because it is cleaner regardless, we now let
the allocator store these pointers at a specified location, rather than
returning only the first one and having the calling code deduce the
remaining ones.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140947.3725394-8-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The voice allocator clearly knows about the field (it resets it), so
it's more consistent (and leads to less duplicated code) to have the
constructor take it as a parameter.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140947.3725394-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This allows us to drop the code that tries to preserve already allocated
voices upon repeated hw_param callback invocations. Getting it right for
multi-channel voices would otherwise get a bit hairy.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140947.3725394-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Eliminate the MIDI type, as there is no such thing - the MPU401 port
doesn't have anything to do with voices.
For clarity, differentiate between regular and extra voices.
Don't atomize the enum into bits in the table display.
Simplify/optimize the storage.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140947.3725394-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On Audigy, the send amounts are merely targets, presumably to avoid
sound distortion due to sudden changes, which the EMU8K docu explicitly
warns about.
However, that "soft-start" would prevent bit-for-bit reproduction, so
we now force the current send amounts to their final values at PCM
playback init.
One might want to do that for the MIDI synthesizer as well, though it
seems mostly pointless due to the attack phase each note has anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140339.3722279-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While this nicely denoises the code, the real intent is being able to
write many registers pseudo-atomically, which will come in handy later.
Idea stolen from kX-project.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518093134.3697955-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The cache causes a fixed delay regardless of stream parameters.
Consequently, all that "cache invalidate size" calculation stuff was
garbage (which can be traced right back to Creative's OSS driver).
This also removes the definitions of registers CD1..CDF, because they
are accessed only relative to CD0 anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230517174256.3657060-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This workaround fails to address the underlying problem, which is
actually wholly self-made. Subsequent patches will fix it.
This reverts commit 56385a12d9.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230517174256.3657060-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Shrink the {in,out}put_source arrays and their data type to what is
actually necessary.
To be still on the safe side, add some static asserts.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536508-11-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Unlike the other models, this is actually a distinct card, rather than
an E-MU 1010 with different "dongles". It is stereo only, and supports
no ADAT (there is no trace of ADAT in the manual, switching the output
mode to ADAT has no effect, and switching the input mode to ADAT just
breaks input (presumably ... my only ADAT source is the card's output)).
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536508-10-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Define arrays of strings instead of snd_kcontrol_new.
While at it, move the E-MU source & destination enum defs next to their
hardware defs, which is a lot more logical and will come in handy in a
followup commit. And add some static asserts to verify that the array
sizes match.
This also applies the compactization from the previous commit to the
destination registers.
While reshuffling the arrays anyway, switch the order of the HAMOA_DAC
& HANA_SPDIF output destinations for the 1010 card, so they follow a
more regular pattern. This should have no functional impact.
The code is somewhat de-duplicated by the extraction of add_ctls().
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536508-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many registers are meaningless for stereo slaves and the extra voices.
This patch cleans up these unnecessary register writes.
snd_emu10k1_playback_{trigger,stop}_voice() is not called for stereo
slaves any more.
snd_emu10k1_playback_prepare_voice() is renamed to
snd_emu10k1_playback_unmute_voice(), as this better reflects its
remaining function. It's not called for the extra voices any more.
Accordingly, snd_emu10k1_playback_mute_voice() is factored out from
snd_emu10k1_playback_stop_voice(), and is called selectively as well.
This doesn't add conditionals which would avoid initializing
sub-registers, as that wouldn't pull its weight.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536451-6-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We initialize them at card init and don't touch them later, so there is
no need to reset them again at voice start.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536451-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We (rightfully) don't enable the envelope engine for PCM voices, so any
related setup is entirely pointless - the EMU8K documentation makes that
very clear, and the fact that the various open drivers all use different
values to no observable detriment pretty much confirms it.
The remaining initializations are regrouped for clarity.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536451-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The voice volume is a raw fractional multiplier that can't actually
represent 1.0. To still enable real pass-through, we now set the volume
to 0.5 (which results in no loss of precision, as the FX bus provides
fractional values) and scale up the samples in DSP code.
To maintain backwards compatibility with existing configuration files,
we rescale the values in the mixer controls. The range is extended
upwards from 0xffff to 0x1fffd, which actually introduces the
possibility of specifying an amplification.
There is still a minor incompatibility with user space, namely if
someone loaded custom DSP code. They'll just get half the volume, so
this doesn't seem like a big deal.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230514170323.3408834-8-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fractional multiplication with the maximal value 2^31-1 causes some tiny
distortion. Instead, we want to multiply with the full 2^31. The catch
is of course that this cannot be represented in the DSP's signed 32 bit
registers.
One way to deal with this is to encode 1.0 as a negative number and
special-case it. As a matter of fact, the SbLive! code path already
contained such code, though the controls never actually exercised it.
A more efficient approach is to use negative values, which actually
extend to -2^31. Accordingly, for all the volume adjustments we now use
the MAC1 instruction which negates the X operand.
The range of the controls in highres mode is extended downwards, so -1
is the new zero/mute. At maximal excursion, real zero is not mute any
more, but I don't think anyone will notice this behavior change. ;-)
That also required making the min/max/values in the control structs
signed. This technically changes the user space interface, but it seems
implausible that someone would notice - the numbers were actually
treated as if they were signed anyway (and in the actual mixer iface
they _are_). And without this change, the min value didn't even make
sense in the first place (and no-one noticed, because it was always 0).
Tested-by: Jonathan Dowland <jon@dow.land>
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230514170323.3408834-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The idea to encode the bitfield manipulation in the register address is
quite clever, but doing that by hand is ugly and error-prone. So derive
it automatically from the mask instead.
Macros cannot #define other macros, so we now declare enums instead.
This also adds macros for decoding the register definitions. These will
be used by later commits.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230514170323.3408798-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Evidently, the channel delay bug exists in all E-MU cards; it's in the
Hana FPGA program, and was never fixed.
Note that the implementation is somewhat lazy - to localize the code
paths, we actually waste a GPR and a DSP instruction by keeping two
delay registers for the same physical source.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230510173917.3073107-6-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since commit 5bbb1ab5bd ("control: use counting semaphore as write lock
for ELEM_WRITE operation"), this has been locking the controls including
their values, not just the list of controls.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230428095941.1706278-6-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The bulk of the commits here are for the conversion of drivers to use
void remove callbacks but there's a reasonable amount of other stuff
going on, the pace of development with the SOF code continues to be high
and there's a bunch of new drivers too:
- More core cleanups from Morimto-san.
- Update drivers to have remove() callbacks returning void, mostly
mechanical with some substantial changes.
- Continued feature and simplification work on SOF, including addition
of a no-DSP mode for bringup, HDA MLink and extensions to the IPC4
protocol.
- Hibernation support for CS35L45.
- More DT binding conversions.
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas R-Car
Gen4, Rockchip RK3588 and TI TAS5733.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRGdEsACgkQJNaLcl1U
h9BNVAf+Ijupg3dhAl6847v1PRYXkYK6YjAayhNd0xRoRePKnnv1zkrsXSBzxZUM
8KHpQDUJyfQbPnE2JRmr1WfHSoNDl/NXdJl+lefPBgol5bzxRji68hDPGjA0645o
R6vzrqLNw8mh3jwptXfEpQfKH8tIvwOeMeLkncDvsm0ZCUR2GhYnjB1g82ih0ssx
lvh36PdCRF0e/ruHxkiVn9b/riID65oTRkN6IxJqoPnqJZVyCiqmiJcfWePpaPir
4R9Dyk+REos/aCLdne1g6H21Tgi0td+blv6empqwdEXG41VSdRMTrOZb1ZISKmpF
ggPbKsk9BjJFBCewllHXJ0YEcBp9/g==
=TVxt
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.4
The bulk of the commits here are for the conversion of drivers to use
void remove callbacks but there's a reasonable amount of other stuff
going on, the pace of development with the SOF code continues to be high
and there's a bunch of new drivers too:
- More core cleanups from Morimto-san.
- Update drivers to have remove() callbacks returning void, mostly
mechanical with some substantial changes.
- Continued feature and simplification work on SOF, including addition
of a no-DSP mode for bringup, HDA MLink and extensions to the IPC4
protocol.
- Hibernation support for CS35L45.
- More DT binding conversions.
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas R-Car
Gen4, Rockchip RK3588 and TI TAS5733.
