Commit Graph

57831 Commits

Author SHA1 Message Date
Linus Torvalds
fce4a1dda2 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (48 commits)
  MIPS: Move arch_get_unmapped_area and gang to new file.
  MIPS: Cleanup arch_get_unmapped_area
  MIPS: Octeon: Don't request interrupts for unused IPI mailbox bits.
  Octeon: Fix interrupt irq settings for performance counters.
  MIPS: Fix build warnings on defconfigs
  MIPS: Lemote 2F, Malta: Fix build warning
  MIPS: Set ELF AT_PLATFORM string for Loongson2 processors
  MIPS: Set ELF AT_PLATFORM string for BMIPS processors
  MIPS: Introduce set_elf_platform() helper function
  MIPS: JZ4740: setup: Autodetect physical memory.
  MIPS: BCM47xx: Fix MAC address parsing.
  MIPS: BCM47xx: Extend the filling of SPROM from NVRAM
  MIPS: BCM47xx: Register SSB fallback sprom callback
  MIPS: BCM47xx: Extend bcm47xx_fill_sprom with prefix.
  SSB: Change fallback sprom to callback mechanism.
  MIPS: Alchemy: Clean up GPIO registers and accessors
  MIPS: Alchemy: Cleanup DMA addresses
  MIPS: Alchemy: Rewrite ethernet platform setup
  MIPS: Alchemy: Rewrite UART setup and constants.
  MIPS: Alchemy: Convert dbdma.c to syscore_ops
  ...
2011-05-19 16:40:47 -07:00
Linus Torvalds
e1f2084ed2 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  input/atari: Fix mouse movement and button mapping
  input/atari: Fix atarimouse init
  input/atari: Use the correct mouse interrupt hook
  m68k/atari: Do not use "/" in interrupt names
  m68k: unistd - Comment out definitions for unimplemented syscalls
  m68k: Really wire up sys_pselect6 and sys_ppoll
  m68k: Merge mmu and non-mmu versions of sys_call_table
  MAINTAINERS: Roman Zippel has been MIA for several years.
  m68k: bitops - Never step beyond the end of the bitmap
  m68k: bitops - offset == ((long)p - (long)vaddr) * 8
2011-05-19 16:27:21 -07:00
Linus Torvalds
e33ab8f275 Merge branches 'stable/irq', 'stable/p2m.bugfixes', 'stable/e820.bugfixes' and 'stable/mmu.bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/irq' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: do not clear and mask evtchns in __xen_evtchn_do_upcall

* 'stable/p2m.bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/p2m: Create entries in the P2M_MFN trees's to track 1-1 mappings

* 'stable/e820.bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/setup: Fix for incorrect xen_extra_mem_start initialization under 32-bit
  xen/setup: Ignore E820_UNUSABLE when setting 1-1 mappings.

* 'stable/mmu.bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen mmu: fix a race window causing leave_mm BUG()
2011-05-19 16:14:58 -07:00
Linus Torvalds
3bfccb7497 Merge branches 'stable/balloon.cleanup' and 'stable/general.cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/balloon.cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/balloon: Move dec_totalhigh_pages() from __balloon_append() to balloon_append()
  xen/balloon: Clarify credit calculation
  xen/balloon: Simplify HVM integration
  xen/balloon: Use PageHighMem() for high memory page detection

* 'stable/general.cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  drivers/xen/sys-hypervisor: Cleanup code/data sections definitions
  arch/x86/xen/smp: Cleanup code/data sections definitions
  arch/x86/xen/time: Cleanup code/data sections definitions
  arch/x86/xen/xen-ops: Cleanup code/data sections definitions
  arch/x86/xen/mmu: Cleanup code/data sections definitions
  arch/x86/xen/setup: Cleanup code/data sections definitions
  arch/x86/xen/enlighten: Cleanup code/data sections definitions
  arch/x86/xen/irq: Cleanup code/data sections definitions
  xen: tidy up whitespace in drivers/xen/Makefile
2011-05-19 16:14:35 -07:00
Linus Torvalds
5318991645 Merge branches 'stable/backend.base.v3' and 'stable/gntalloc.v7' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/backend.base.v3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/pci: Fix compiler error when CONFIG_XEN_PRIVILEGED_GUEST is not set.
  xen/p2m: Add EXPORT_SYMBOL_GPL to the M2P override functions.
  xen/p2m/m2p/gnttab: Support GNTMAP_host_map in the M2P override.
  xen/irq: The Xen hypervisor cleans up the PIRQs if the other domain forgot.
  xen/irq: Export 'xen_pirq_from_irq' function.
  xen/irq: Add support to check if IRQ line is shared with other domains.
  xen/irq: Check if the PCI device is owned by a domain different than DOMID_SELF.
  xen/pci: Add xen_[find|register|unregister]_device_domain_owner functions.

* 'stable/gntalloc.v7' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/gntdev,gntalloc: Remove unneeded VM flags
2011-05-19 16:14:25 -07:00
Linus Torvalds
6b55b90845 Merge branch 'move-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
* 'move-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Move x86 drivers to drivers/cpufreq/
2011-05-19 15:59:24 -07:00
Linus Torvalds
f8223b1755 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] remove redundant sprintf from request_module call.
  [CPUFREQ] cpufreq_stats.c: Fixed brace coding style issue
  [CPUFREQ] Fix memory leak in cpufreq_stat
  [CPUFREQ] cpufreq.h: Fix some checkpatch.pl coding style issues.
  [CPUFREQ] use dynamic debug instead of custom infrastructure
  [CPUFREQ] CPU hotplug, re-create sysfs directory and symlinks
  [CPUFREQ] Fix _OSC UUID in pcc-cpufreq
2011-05-19 15:57:29 -07:00
Dave Jones
bb0a56ecc4 [CPUFREQ] Move x86 drivers to drivers/cpufreq/
Signed-off-by: Dave Jones <davej@redhat.com>
2011-05-19 18:51:07 -04:00
Linus Torvalds
98a38a5d60 Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  params.c: Use new strtobool function to process boolean inputs
  debugfs: move to new strtobool
  Add a strtobool function matching semantics of existing in kernel equivalents
  modpost: Update 64k section support for binutils 2.18.50
  module: Use binary search in lookup_symbol()
  module: Use the binary search for symbols resolution
  lib: Add generic binary search function to the kernel.
  module: Sort exported symbols
  module: each_symbol_section instead of each_symbol
  module: split unset_section_ro_nx function.
  module: undo module RONX protection correctly.
  module: zero mod->init_ro_size after init is freed.
  minor ANSI prototype sparse fix
  module: reorder kparam_array to remove alignment padding on 64 bit builds
  module: remove 64 bit alignment padding from struct module with CONFIG_TRACE*
  module: do not hide __modver_version_show declaration behind ifdef
  module: deal with alignment issues in built-in module versions
2011-05-19 14:56:13 -07:00
Linus Torvalds
7663164f26 Merge branch 'docs-move' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs
* 'docs-move' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs:
  Correct occurrences of - Documentation/kvm/ to Documentation/virtual/kvm - Documentation/uml/ to Documentation/virtual/uml - Documentation/lguest/ to Documentation/virtual/lguest throughout the kernel source tree.
  Add a 00-INDEX file to Documentation/virtual Remove uml from the top level 00-INDEX file.
  Move kvm, uml, and lguest subdirectories under a common "virtual" directory, I.E:
2011-05-19 14:55:34 -07:00
Michael Schmitz
7786908c3c input/atari: Use the correct mouse interrupt hook
The Atari keyboard driver calls atari_mouse_interrupt_hook if it's set, not
atari_input_mouse_interrupt_hook. Fix below.

[geert] Killed off atari_mouse_interrupt_hook completely, after fixing another
incorrect assignment in atarimouse.c.

Signed-off-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19 18:19:11 +02:00
Geert Uytterhoeven
79abeed6ee m68k/atari: Do not use "/" in interrupt names
It may trigger a warning in fs/proc/generic.c:__xlate_proc_name() when
trying to add an entry for the interrupt handler to sysfs.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19 18:19:10 +02:00
Geert Uytterhoeven
1fc74ac612 m68k: unistd - Comment out definitions for unimplemented syscalls
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19 18:19:10 +02:00
Geert Uytterhoeven
d6d42bb2f8 m68k: Really wire up sys_pselect6 and sys_ppoll
We reserved the numbers a long time ago, but never wired them up in the
syscall table as they need TIF_RESTORE_SIGMASK, which we only got last year
in commit cb6831d5d3099e772a510eb3e1ed0760ccffb45e ("m68k: Switch to saner
sigsuspend()")

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: stable@kernel.org
2011-05-19 18:19:10 +02:00
Geert Uytterhoeven
c4245c9d65 m68k: Merge mmu and non-mmu versions of sys_call_table
Impact for nommu:
  - Store table in .rodata instead of .text,
  - Let kernel/sys_ni.c handle the stubbing of MMU-only syscalls,
  - Implement sys_mremap and sys_nfsservct,
  - Remove unused padding at the end of the table.

Impact for mmu:
  - Store table in .rodata instead of .data.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
2011-05-19 18:19:10 +02:00
Geert Uytterhoeven
f82a519f12 m68k: bitops - Never step beyond the end of the bitmap
find_next bitops on m68k (find_next_zero_bit, find_next_bit, and
find_next_bit_le) may cause out of bounds memory access
when the bitmap size in bits % 32 != 0 and offset (the bitnumber
to start searching at) is very close to the bitmap size.

For example,

       unsigned long bitmap[2] = { 0, 0 };
       find_next_bit(bitmap, 63, 62);

1. find_next_bit() tries to find any set bits in bitmap[1],
   but no bits set.

2. Then find_first_bit(bimap + 2, -1)

3. Unfortunately find_first_bit() takes unsigned int as the size argument.

4. find_first_bit will access bitmap[2~] until it find any set bits.

Add missing tests for stepping beyond the end of the bitmap to all
find_{first,next}_*() functions, and make sure they never return a value
larger than the bitmap size.

Reported-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19 18:19:09 +02:00
Geert Uytterhoeven
359c47ea71 m68k: bitops - offset == ((long)p - (long)vaddr) * 8
Hence use "offset" in find_next_{,zero_}bit(), like is already done for
find_next_{,zero_}bit_le()

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19 18:19:09 +02:00
Daniel Kiper
b53cedebd7 arch/x86/xen/smp: Cleanup code/data sections definitions
Cleanup code/data sections definitions
accordingly to include/linux/init.h.

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-19 11:30:40 -04:00
Daniel Kiper
fb6ce5dea4 arch/x86/xen/time: Cleanup code/data sections definitions
Cleanup code/data sections definitions
accordingly to include/linux/init.h.

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-19 11:30:39 -04:00
Daniel Kiper
ad7ba09e65 arch/x86/xen/xen-ops: Cleanup code/data sections definitions
Cleanup code/data sections definitions
accordingly to include/linux/init.h.

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-19 11:30:39 -04:00
Daniel Kiper
3f508953dd arch/x86/xen/mmu: Cleanup code/data sections definitions
Cleanup code/data sections definitions
accordingly to include/linux/init.h.

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
[v1: Rebased on top of latest linus's to include fixes in mmu.c]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-19 11:30:29 -04:00
Tian, Kevin
983bbf1af0 x86: Don't unmask disabled irqs when migrating them
It doesn't make sense to unconditionally unmask a disabled irq when
migrating it from offlined cpu to another. If the irq triggers then it
will be disabled in the interrupt handler anyway. So we can just avoid
unmasking it.

[ tglx: Made masking unconditional again and fixed the changelog ]

Signed-off-by: Fengzhe Zhang <fengzhe.zhang@intel.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>
Link: http://lkml.kernel.org/r/%3C625BA99ED14B2D499DC4E29D8138F1505C8ED7F7E3%40shsmsx502.ccr.corp.intel.com%3E
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-19 14:51:08 +02:00
Tian, Kevin
b87ba87ca2 x86: Skip migrating IRQF_PER_CPU irqs in fixup_irqs()
IRQF_PER_CPU means that the irq cannot be moved away from a given
cpu. So it must not be migrated when the cpu goes offline.

[ tglx: massaged changelog ]

Signed-off-by: Fengzhe Zhang <fengzhe.zhang@intel.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>
Link: http://lkml.kernel.org/r/%3C625BA99ED14B2D499DC4E29D8138F1505C8ED7F7E2%40shsmsx502.ccr.corp.intel.com%3E
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-19 14:51:08 +02:00
Thomas Gleixner
ab0e08f15d x86: hpet: Cleanup the clockevents init and register code
No need to recalculate the frequency and the conversion factors over
and over. Calculate the frequency once and use the new config/register
interface and let the core code do the math.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/%3C20110518210136.646482357%40linutronix.de%3E
2011-05-19 14:24:16 +02:00
Thomas Gleixner
61ee9a4ba0 x86: Convert PIT to clockevents_config_and_register()
Let the core do the work.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/%3C20110518210136.545615675%40linutronix.de%3E
2011-05-19 14:24:16 +02:00
Ralf Baechle
6f6c3c33c0 MIPS: Move arch_get_unmapped_area and gang to new file.
It never really belonged into syscall.c and it's about to become well more
complex.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:49 +01:00
Ralf Baechle
9c1e8a9138 MIPS: Cleanup arch_get_unmapped_area
As noticed by Kevin Cernekee <cernekee@gmail.com> in
http://www.linux-mips.org/cgi-bin/extract-mesg.cgi?a=linux-mips&m=2011-05&i=BANLkTikq04wuK%3Dbz%2BLieavmm3oDtoYWKxg%40mail.gmail.com

Patchwork: https://patchwork.linux-mips.org/patch/2387/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:49 +01:00
David Daney
e650ce0f08 MIPS: Octeon: Don't request interrupts for unused IPI mailbox bits.
We only use the three low-order mailbox bits.  Leave the upper bits alone
for possible use by drivers and other software.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2090/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:49 +01:00
Chandrakala Chavva
7716e6548a Octeon: Fix interrupt irq settings for performance counters.
Octeon uses different interrupt irq for timer and performance counters.
Set CvmCtl[IPPCI] to correct irq value very early.

Signed-off-by: Chandrakala Chavva <cchavva@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Cc: Chandrakala Chavva <cchavva@caviumnetworks.com>
Patchwork: https://patchwork.linux-mips.org/patch/2085/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:49 +01:00
Wanlong Gao
b32ee693eb MIPS: Fix build warnings on defconfigs
Since d45dcef770 ["Bluetooth: Fix BT_L2CAP
and BT_SCO in Kconfig"] BT_L2CAP=m and BT_SCO=m are no longer valid so
change the settings from m to y.

[ralf@linux-mips.org: Merging only the MIPS parts of this patch.]

Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com>
To: akpm@linux-foundation.org
To: manuel.lauss@googlemail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linuxppc-dev@lists.ozlabs.org
Patchwork: https://patchwork.linux-mips.org/patch/2277/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:49 +01:00
Wanlong Gao
1c8da7a110 MIPS: Lemote 2F, Malta: Fix build warning
Since 5ada28bf76 ["led-class: always
implement blinking"] LEDS_CLASS=m is no longer valid so change the setting
from m to y.

Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com>
To: david.woodhouse@intel.com
To: akpm@linux-foundation.org
To: mingo@elte.hu
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2276/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:48 +01:00
Robert Millan
5aac1e8a38 MIPS: Set ELF AT_PLATFORM string for Loongson2 processors
Signed-off-by: Robert Millan <rmh@gnu.org>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: wu zhangjin <wuzhangjin@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2302/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:48 +01:00
Kevin Cernekee
06785df09b MIPS: Set ELF AT_PLATFORM string for BMIPS processors
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: Robert Millan <rmh@gnu.org>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: wu zhangjin <wuzhangjin@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2300/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:48 +01:00
Robert Millan
c094c99e65 MIPS: Introduce set_elf_platform() helper function
Replace these sequences:

if (cpu == 0)
	__elf_platform = "foo";

with a trivial inline function.

Signed-off-by: Robert Millan <rmh@gnu.org>
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: wu zhangjin <wuzhangjin@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2304/
Patchwork: https://patchwork.linux-mips.org/patch/2374/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:48 +01:00
Maarten ter Huurne
6edde02476 MIPS: JZ4740: setup: Autodetect physical memory.
Assume that the boot loader knows the physical memory of the system and
deduce that information from the contents of the SDRAM control register.
It is still possible to override with with the "mem=" parameter, but we
have a sensible default now.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2319/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:48 +01:00
Hauke Mehrtens
9cbda726bb MIPS: BCM47xx: Fix MAC address parsing.
Some devices like the Netgear WGT634u are using minuses between the blocks
of the MAC address and other devices are using colons to separate them.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2366/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:47 +01:00
Hauke Mehrtens
41790fd51f MIPS: BCM47xx: Extend the filling of SPROM from NVRAM
Some members of the struct ssb_sprom where not filled with data available
in the NVRAM. Some attribute names in the NVRAM changed from SPROM version
3 to version 4. This patch was done by analyzing the the pci sprom parser
in the ssb code and some open source parts of the braodcom wireless driver
used on embedded devices.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2365/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:47 +01:00
Hauke Mehrtens
fe6f3642ac MIPS: BCM47xx: Register SSB fallback sprom callback
We are generating the prefix based on the PCI bus address the device is
on. This is done like Broadcom does it in their code expect that the the
bus number is increased by one. In the SB bus implementation used by
Broadcom the SB bus emulates a PCI bus so the kernel sees one PCI bus
more then in our implementation. We do not handle prefixes like sb/1/
yet as they are only used on the new bus which is not implemented yet.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2364/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:47 +01:00
Hauke Mehrtens
a7c62f8564 MIPS: BCM47xx: Extend bcm47xx_fill_sprom with prefix.
When an other SSB based device without an own SPROM is attached, using the
PCI bus to the main SSB based device, the data normally found in the SPROM
will be stored in the NVRAM on modern devices. The keys, to load the data
from the NVRAM, are all using some sort of prefix like pci/1/1/, pci/1/3/
or sb/1/ before the actual key. This patch extends bcm47xx_fill_sprom() to
make it possible to read out these values when some prefix was used.

The keys for the SPROM data used on the main chip does not have a prefix.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2363/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:47 +01:00
Hauke Mehrtens
b3ae52b6b0 SSB: Change fallback sprom to callback mechanism.
Some embedded devices like the Netgear WNDR3300 have two SSB based cards
without an own sprom on the pci bus. We have to provide two different
fallback sproms for these and this was not possible with the old solution.
In the bcm47xx architecture the sprom data is stored in the nvram in the
main flash storage. The architecture code will be able to fill the sprom
with the stored data based on the bus where the device was found.

The bcm63xx code should do the same thing as before, just using the new
API.

Acked-by: Michael Buesch <mb@bu3sch.de>
Cc: netdev@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2362/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:47 +01:00
Manuel Lauss
b7f720d68c MIPS: Alchemy: Clean up GPIO registers and accessors
remove au_readl/au_writel, remove the predefined GPIO1/2 KSEG1 register
addresses and fix the fallout in all boards and drivers.

This also fixes a bug in the mtx-1_wdt driver which was introduced by
commit 6ea8115bb6
("Convert mtx1 wdt to be a platform device and use generic GPIO API")
before this patch mtx-1_wdt only modified GPIO215, the patch then
used the gpio resource information as bit index into the GPIO2 register
but the conversion to the GPIO API didn't realize that.
With this patch the drivers original behaviour is restored and GPIO15
is left alone.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: Florian Fainelli <florian@openwrt.org>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: linux-watchdog@vger.kernel.org
Cc: Wim Van Sebroeck <wim@iguana.be>
Patchwork: https://patchwork.linux-mips.org/patch/2381/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-05-19 09:55:46 +01:00
Manuel Lauss
5d4ddcb427 MIPS: Alchemy: Cleanup DMA addresses
According to the databooks, the Au1000 DMA engine must be programmed with
the physical FIFO addresses.  This patch does that; furthermore this
opened the possibility to get rid of a lot of now unnecessary address
defines.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Patchwork: https://patchwork.linux-mips.org/patch/2348/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-05-19 09:55:46 +01:00
Manuel Lauss
40d8bc2817 MIPS: Alchemy: Rewrite ethernet platform setup
Rewrite ethernet setup to use runtime cpu detection, and also clean up
the ethernet base address mess as far as possible.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Patchwork: https://patchwork.linux-mips.org/patch/2353/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-05-19 09:55:46 +01:00
Manuel Lauss
80130204b4 MIPS: Alchemy: Rewrite UART setup and constants.
Detect CPU type at runtime and setup uarts accordingly; also clean up the
uart base address mess in the process as far as possible.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Patchwork: https://patchwork.linux-mips.org/patch/2352/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-05-19 09:55:45 +01:00
Manuel Lauss
adcb86279f MIPS: Alchemy: Convert dbdma.c to syscore_ops
Convert the PM sysdev to syscore_ops and clean up the ddma addresses a bit.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Patchwork: https://patchwork.linux-mips.org/patch/2351/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:45 +01:00
Manuel Lauss
4b5c82b5e5 MIPS: Alchemy: Convert irq.c to syscore_ops.
Convert the PM sysdev to use syscore_ops instead.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Patchwork: https://patchwork.linux-mips.org/patch/2350/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:45 +01:00
Manuel Lauss
dca7587185 MIPS: Alchemy: irq code and constant cleanup
replace au_readl/au_writel with __raw_readl/__raw_writel,
and clean up IC-related stuff from the headers.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Patchwork: https://patchwork.linux-mips.org/patch/2354/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:45 +01:00
Manuel Lauss
c1e58a3129 MIPS: Alchemy: update inlinable GPIO API
This fixes a build failure with gpio_keys and CONFIG_GPIOLIB=n (mtx1):
  CC      drivers/input/keyboard/gpio_keys.o
gpio_keys.c: In function 'gpio_keys_report_event':
gpio_keys.c:325:2: error: implicit declaration of function 'gpio_get_value_cansleep'
gpio_keys.c: In function 'gpio_keys_setup_key':
gpio_keys.c:390:3: error: implicit declaration of function 'gpio_set_debounce'

Also add stubs for the other new functions.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Patchwork: https://patchwork.linux-mips.org/patch/2346/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:45 +01:00
Manuel Lauss
0591128066 MIPS: DB1200: Set Config[OD] for improved stability.
Setting Config[OD] gets rid of a _LOT_ of spurious CPLD interrupts,
but also decreases overall performance a bit.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Patchwork: https://patchwork.linux-mips.org/patch/2347/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:44 +01:00
Ralf Baechle
8b659a3931 MIPS: Split do_syscall_trace into two functions.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:44 +01:00
Ralf Baechle
c19c20ac63 MIPS: Use single define for pending work on syscall exit
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:44 +01:00
Ralf Baechle
4f0ad95088 MIPS: IP27: Remove pointless switch statement.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:44 +01:00
John Crispin
f1f0ceaada MIPS: Lantiq: Add etop board support
Register the etop platform device inside the machtype specific init code.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2356/
Patchwork: https://patchwork.linux-mips.org/patch/2370/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:43 +01:00
John Crispin
504d4721ee MIPS: Lantiq: Add ethernet driver
This patch adds the driver for the ETOP Packet Processing Engine (PPE32)
found inside the XWAY family of Lantiq MIPS SoCs. This driver makes 100MBit
ethernet work. Support for all 8 dma channels, gbit and the embedded switch
found on the ar9/vr9 still needs to be implemented.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2357/
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:43 +01:00
John Crispin
dfec1a827d MIPS: Lantiq: Add DMA support
This patch adds support for the DMA engine found inside the XWAY family of
SoCs. The engine has 5 ports and 20 channels.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2355/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:43 +01:00
John Crispin
935c500c37 MIPS: Lantiq: Add more gpio drivers
The XWAY family allows to extend the number of gpios by using shift
registers or latches. This patch adds the 2 drivers needed for this. The
extended gpios are output only.

[ralf@linux-mips.org: Fixed ltq_stp_probe section() attributes.]

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2258/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:42 +01:00
John Crispin
973c32eb7f MIPS: Lantiq: Add machtypes for lantiq eval kits
This patch adds mach specific code for the Lantiq EASY50712/50601 evaluation
boards

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2255/
Patchwork: https://patchwork.linux-mips.org/patch/2361/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:42 +01:00
John Crispin
a053ac1702 MIPS: Lantiq: Add mips_machine support
This patch adds support for Gabor's mips_machine patch.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2251/
Patchwork: https://patchwork.linux-mips.org/patch/2358/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:42 +01:00
John Crispin
24aff71fa8 MIPS: Lantiq: Add platform device support
This patch adds the wrappers for registering our platform devices.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2254/
Patchwork: https://patchwork.linux-mips.org/patch/2360/
Patchwork: https://patchwork.linux-mips.org/patch/2359/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:42 +01:00
John Crispin
e47d488935 MIPS: Lantiq: Add PCI controller support.
The Lantiq family of SoCs have a EBU (External Bus Unit). This patch adds
the driver that allows us to use the EBU as a PCI controller. In order for
PCI to work the EBU is set to endianess swap all the data. In addition we
need to make use of SWAP_IO_SPACE for device->host DMA to work.

The clock of the PCI works in several modes (internal/external). If this
is not configured correctly the SoC will hang.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2250/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:42 +01:00
John Crispin
8ec6d93508 MIPS: Lantiq: add SoC specific code for XWAY family
Add support for the Lantiq XWAY family of Mips24KEc SoCs.

* Danube (PSB50702)
* Twinpass (PSB4000)
* AR9 (PSB50802)
* Amazon SE (PSB5061)

The Amazon SE is a lightweight SoC and has no PCI as well as a different
clock. We split the code out into seperate files to handle this.

The GPIO pins on the SoCs are multi function and there are several bits
we can use to configure the pins. To be as compatible as possible to
GPIOLIB we add a function

int lq_gpio_request(unsigned int pin, unsigned int alt0,
        unsigned int alt1, unsigned int dir, const char *name);

which lets you configure the 2 "alternate function" bits. This way drivers like
PCI can make use of GPIOLIB without a cubersome wrapper.

The PLL code inside arch/mips/lantiq/xway/clk-xway.c is voodoo to me. It was
taken from a 2.4.20 source tree and was never really changed by me since then.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2249/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:41 +01:00
John Crispin
171bb2f19e MIPS: Lantiq: Add initial support for Lantiq SoCs
Add initial support for Mips based SoCs made by Lantiq. This series will add
support for the XWAY family.

The series allows booting a minimal system using a initramfs or NOR. Missing
drivers and support for Amazon and GPON family will be provided in a later
series.

[Ralf: Remove some cargo cult programming and fixed formatting.]

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2252/
Patchwork: https://patchwork.linux-mips.org/patch/2371/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:41 +01:00
Maxin John
c0a5afb9bc MIPS: Enable kmemleak for MIPS
Signed-off-by: Maxin B. John <maxin.john@gmail.com>
To: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Baluta <dbaluta@ixiacom.com>
Cc: naveen yadav <yad.naveen@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Patchwork: https://patchwork.linux-mips.org/patch/2244/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:41 +01:00
Jayachandran C
9b130f8004 MIPS: XLR, XLS: Add PCI support.
Adds pci/pci-xlr.c to support for XLR PCI/PCI-X interface and XLS PCIe
interface.
Update irq.c to ack PCI interrupts, use irq handler data to do the
PCI/PCIe bus ack.

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2337/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:41 +01:00
Jayachandran C
f9cab74fd9 MIPS: Add default configuration for XLR/XLS processors
Enable XLR CPU support, SMP, initramfs based root filesystem etc.

[ralf@linux-mips.org: shrink the defconfig file through make savedefconfig.]

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2338/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:40 +01:00
Jayachandran C
7f058e852b MIPS: Kconfig and Makefile update for Netlogic XLR/XLS
Add NLM_XLR_BOARD, CPU_XLR and other config options
Makefile updates, mostly based on r4k

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2334/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:40 +01:00
Jayachandran C
5c64250674 MIPS: Platform files for XLR/XLS processor support
* include/asm/netlogic added with files common for all Netlogic processors
  (common with XLP which will be added later)
* include/asm/netlogic/xlr for XLR/XLS chip specific files
* netlogic/xlr for XLR/XLS platform files

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2334/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:40 +01:00
Jayachandran C
efa0f81c11 MIPS: Netlogic: Cache, TLB support and feature overrides for XLR
CPU_XLR case added to mm/tlbex.c
CPU_XLR case added to mm/c-r4k.c for PINDEX attribute
Feature overrides for XLR cpu.

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2333/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:40 +01:00
Jayachandran C
3c595a515d MIPS: Netlogic: mach-netlogic include files
Add war.h and irq.h with XLR/XLS definitions.

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2331/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:39 +01:00
Jayachandran C
a7117c6bdd MIPS: Netlogic XLR/XLS processor IDs.
Add Netlogic Microsystems company ID and processor IDs for XLR
and XLS processors for CPU probe. Add CPU_XLR to cpu_type_enum.

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
Cc:     linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2367/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:39 +01:00
Sebastian Siewior
f38aa70877 powerpc: Remove last piece of GEMINI
It seems that Adrian is getting old. He removed almost everything of
GEMINI in commit c53653130 ("[POWERPC] Remove the broken Gemini
support") except this piece.

Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 17:32:29 +10:00
Gabriel Paubert
2c78027a62 powerpc: Fix for Pegasos keyboard and mouse
[See http://lists.ozlabs.org/pipermail/linuxppc-dev/2010-October/086424.html
and followups. Part of the commit message is directly copied from that.]

Commit 540c6c392f tries to find i8042 IRQs in
the device-tree but doesn't fall back to the old hardcoded 1 and 12 in all
failure cases.

Specifically, the case where the device-tree contains nothing matching
pnpPNP,303 or pnpPNP,f03 doesn't seem to be handled well. It sort of falls
through to the old code, but leaves the IRQs set to 0.

Signed-off-by: Gabriel Paubert <paubert@iram.es>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 17:32:27 +10:00
Benjamin Herrenschmidt
03bf469add powerpc: Make early memory scan more resilient to out of order nodes
We keep track of the size of the lowest block of memory and call
setup_initial_memory_limit() only after we've parsed them all

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Milton Miller <miltonm@bga.com>
2011-05-19 17:32:25 +10:00
Milton Miller
b73a635f34 powerpc/pseries/iommu: Cleanup ddw naming
When using a property refering to the availibily of dynamic dma windows
call it ddw_avail not ddr_avail.

dupe_ddw_if_already_created does not dupilcate anything, it only finds
and reuses the windows we already created, so rename it to
find_existing_ddw.  Also, it does not need the pci device node, so
remove that argument.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 17:25:28 +10:00
Milton Miller
c85667802b powerpc/pseries/iommu: Find windows after kexec during boot
Move the discovery of windows previously setup from when the pci driver
calls set_dma_mask to an arch_initcall.

When kexecing into a kernel with dynamic dma windows allocated, we need
to find the windows early so that memory hot remove will be able to
delete the tces mapping the to be removed memory and memory hotplug add
will map the new memory into the window.  We should not wait for the
driver to be loaded and the device to be probed.  The iommu init hooks
are before kmalloc is setup, so defer to arch_initcall.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 17:25:28 +10:00
Milton Miller
2573f68422 powerpc/pseries/iommu: Remove ddw property when destroying window
If we destroy the window, we need to remove the property recording that
we setup the window.  Otherwise the next kernel we kexec will be
confused.

Also we should remove the property if even if we don't find the
ibm,ddw-applicable window or if one of the property sizes is unexpected;
presumably these came from a prior kernel via kexec, and we will not be
maintaining the window with respect to memory hotplug.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 17:25:27 +10:00
Milton Miller
64ac822fb4 powerpc/pseries/iommu: Add additional checks when changing iommu mask
Do not check dma supported until we have chosen the right dma ops.
Check that the device is pci before treating it as such.

Check the mask is supported by the selected dma ops before
committing it.

We only need to set iommu ops if it is not the current ops; this
avoids searching the tree for the iommu table unnecessarily.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 17:25:27 +10:00
Nishanth Aravamudan
23a6c48404 powerpc/pseries/iommu: Use correct return type in dupe_ddw_if_already_created
Otherwise we get silent truncations.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Milton Miller <miltonm@bga.com>
Cc: linuxppc-dev@ozlabs.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 17:25:27 +10:00
Jan Glauber
448694a1d5 module: undo module RONX protection correctly.
While debugging I stumbled over two problems in the code that protects module
pages.

First issue is that disabling the protection before freeing init or unload of
a module is not symmetric with the enablement. For instance, if pages are set
to RO the page range from module_core to module_core + core_ro_size is
protected. If a module is unloaded the page range from module_core to
module_core + core_size is set back to RW.
So pages that were not set to RO are also changed to RW.
This is not critical but IMHO it should be symmetric.

Second issue is that while set_memory_rw & set_memory_ro are used for
RO/RW changes only set_memory_nx is involved for NX/X. One would await that
the inverse function is called when the NX protection should be removed,
which is not the case here, unless I'm missing something.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-05-19 16:55:26 +09:30
Benjamin Herrenschmidt
4c8440666b Merge branch 'merge' into next 2011-05-19 17:00:06 +10:00
Benjamin Herrenschmidt
751e1f5099 powerpc: Remove unused/obsolete CONFIG_XICS
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 16:55:11 +10:00
Milton Miller
41fb5e6260 powerpc: Make IRQ_NOREQUEST last to clear, first to set
When creating an irq, don't allow a concurent driver request until
we have caled map, which will likley call set_chip_and_handler to
change the irq_chip and its operations.

Similarly, when tearing down an IRQ, make sure no new uses come
along while we change the irq back to the nop chip and then reset
the descriptor to freed status.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 16:54:46 +10:00
Prabhakar Kushwaha
41cd08560b powerpc/85xx: Create dts of each core in CAMP mode for P1020RDB
Create the dts files for each core and splits the devices between the two
cores for P1020RDB.

Core0 has core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb, eth1,
eth2, sdhc, crypto, global-util, message, pci0, pci1, msi.
Core1 has l2, eth0, crypto.

MPIC is shared between two cores but each core will protect its interrupts
from other core by using "protected-sources" of mpic.

Fix compatible property for global-util node of P1020si.dtsi.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-19 01:36:21 -05:00
Prabhakar Kushwaha
bc99d09abe powerpc/85xx: Fix PCIe IDSEL for Px020RDB
PCIe device in legacy mode can trigger interrupts using the wires #INTA,
#INTB ,#INTC and #INTD. PCI devices are obligated to use #INTx for
interrupts under legacy mode.  Each PCI slot or device is typically wired
to different inputs on the interrupt controller.

So, Define interrupt-map and interrupt-map-mask properties for device tree
to of map each PCI interrupt signal to the inputs of the interrupt
controller.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-19 01:15:42 -05:00
Prabhakar Kushwaha
eb2c5d9965 powerpc/85xx: P2020 DTS: re-organize dts files
Creates P2020si.dtsi, containing information for P2020 SoC. Modifies dts
files for P2020 based systems to use dtsi file.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-19 01:14:33 -05:00
Prabhakar Kushwaha
b6e4df4dab powerpc/85xx: P1020 DTS : re-organize dts files
Creates P1020si.dtsi, containing information for the P1020 SoC. Modifies dts
files for P1020 based systems to use dtsi file

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Acked-by: Grant Likely <grant.likelY@secretlab.ca>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-19 01:14:31 -05:00
Scott Wood
b637cf7bf8 powerpc/fsl: enable verbose bug output
This debug option has no overhead other than a slight increase in
kernel size, and makes bug reports more useful.  While some end users
may prefer to save the space, as a default on a kernel config aimed
primarily at development on reference boards, it should be enabled.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-19 01:14:30 -05:00
Scott Wood
5e8393ab31 powerpc/e5500: add networking to defconfig
Even though support for the p5020's on-chip ethernet is not yet upstream,
it is not appropriate to disable all networking support (including
loopback, unix domain sockets, external ethernet devices, etc) in the
defconfig.  The networking settings are taken from mpc85xx_smp_defconfig,
minus the drivers for ethernet devices not found on any current e5500
chip.

The other changes are the result of running "make savedefconfig".

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-19 01:14:29 -05:00
Scott Wood
ea94187fac powerpc/mpic: add the mpic global timer support
Add support for MPIC timers as requestable interrupt sources.

Based on http://patchwork.ozlabs.org/patch/20941/ by Dave Liu.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-19 01:14:28 -05:00
Scott Wood
22d168ce60 powerpc/mpic: parse 4-cell intspec types other than zero
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-19 01:14:27 -05:00
Scott Wood
c281739f59 powerpc/p1022ds: fix broken mpic timer node
There is no hardware interrupt 0xf7.  But now we can express the timer
interrupt using 4-cell interrupts.  This requires converting all of the
other interrupt specifiers in the tree as well.

Also add the second timer group, and fix the reg property to only
describe the timer registers.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-19 01:14:26 -05:00
Timur Tabi
f46dad270b powerpc/86xx: don't pretend that we support 8-bit pixels on the MPC8610 HPCD
If the video mode is set to 16-, 24-, or 32-bit pixels, then the pixel data
contains actual levels of red, blue, and green.  However, if the video mode
is set to 8-bit pixels, then the 8-bit value represents an index into color
table.  This is called "palette mode" on the Freescale DIU video controller.

The DIU driver does not currently support palette mode, but the MPC8610 HPCD
board file returned a non-zero (although incorrect) pixel format value for
8-bit mode.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-19 01:13:53 -05:00
Geert Uytterhoeven
e0be2c2164 powerpc/mpc8610_hpcd: Do not use "/" in interrupt names
It may trigger a warning in fs/proc/generic.c:__xlate_proc_name() when
trying to add an entry for the interrupt handler to sysfs.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-19 00:41:10 -05:00
Scott Wood
3a6e9bd7f6 powerpc/e5500: set non-base IVORs
Without this, we attempt to use doorbells for IPIs, and end up
branching to some bad address.  Plus, even for the exceptions
we don't implement, it's good to handle it and get a message out.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-19 00:36:43 -05:00
Kumar Gala
d36b4c4f3c powerpc/fsl-booke64: Add support for Debug Level exception handler
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-19 00:36:42 -05:00
Kumar Gala
134c428e5a Merge remote branch 'benh/merge' into benh-next 2011-05-19 00:36:21 -05:00
Milton Miller
1e8c23013e powerpc: Remove virq_to_host
The only references to the irq_map[].host field are internal to
arch/powerpc/kernel/irq.c

Signed-off-by: Milton Miller <miltonm@bga.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:32:01 +10:00
Milton Miller
3ee62d365b powerpc: Add virq_is_host to reduce virq_to_host usage
Some irq_host implementations are using virq_to_host to check if
they are the irq_host for a virtual irq.  To allow us to make space
versus time tradeoffs, replace this usage with an assertive
virq_is_host that confirms or denies the irq is associated with the
given irq_host.

Signed-off-by: Milton Miller <miltonm@bga.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:31:59 +10:00
Milton Miller
9553361499 powerpc/axon_msi: Validate msi irq via chip_data
Instead of checking for rogue msi numbers via the irq_map host field
set the chip_data to h.host_data (which is the msic struct pointer)
at map and compare it in get_irq.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:31:57 +10:00
Milton Miller
6b0aea44d6 powerpc/spider-pic: Get pic from chip_data instead of irq_map
Building on Grant's efforts to remove the irq_map array, this patch
moves spider-pics use of virq_to_host() to use irq_data_get_chip_data
and sets the irq chip data in the map call, like most other interrupt
controllers in powerpc.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:31:55 +10:00
Milton Miller
da05198002 powerpc: Remove irq_host_ops->remap hook
It was called from irq_create_mapping if that was called for a host
and hwirq that was previously mapped, "to update the flags".  But the
only implementation was in beat_interrupt and all it did was repeat a
hypervisor call without error checking that was performed with error
checking at the beginning of the map hook.  In addition, the comment on
the beat remap hook says it will only called once for a given mapping,
which would apply to map not remap.

All flags should be known by the time the match hook is called, before
we call the map hook.  Removing this mostly unused hook will simpify
the requirements of irq_domain concept.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:31:53 +10:00
Milton Miller
23f73a5fb0 powerpc/psurge: Create a irq_host for secondary cpus
Create a dummy irq_host using the generic dummy irq chip for the secondary
cpus to use.  Create a direct irq mapping for the ipi and register the
ipi action handler against it.  If for some unlikely reason part of this
fails then don't detect the secondary cpus.

This removes another instance of NO_IRQ_IGNORE, records the ipi stats
for the secondary cpus, and runs the ipi on the interrupt stack.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:31:51 +10:00
Milton Miller
67347eba15 powerpc/mpc62xx_pic: Fix get_irq handling of NO_IRQ
If none of irq category bits were set mpc52xx_get_irq() would pass
NO_IRQ_IGNORE (-1) to irq_linear_revmap, which does an unsigned compare
and declares the interrupt above the linear map range.  It then punts
to irq_find_mapping, which performs a linear search of all irqs,
which will likely miss and only then return NO_IRQ.

If no status bit is set, then we should return NO_IRQ directly.
The interrupt should not be suppressed from spurious counting, in fact
that is the definition of supurious.

Signed-off-by: Milton Miller <miltonm@bga.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:31:49 +10:00
Milton Miller
c42385cd45 powerpc/mpc5121_ads_cpld: Remove use of NO_IRQ_IGNORE
As NO_IRQ_IGNORE is only used between the static function cpld_pic_get_irq
and its caller cpld_pic_cascade, and cpld_pic_cascade only uses it to
suppress calling handle_generic_irq, we can change these uses to NO_IRQ
and remove the extra tests and pathlength in cpld_pic_cascade.

Signed-off-by: Milton Miller <miltonm@bga.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:31:47 +10:00
Milton Miller
d1921bcdee powerpc/fsl_msi: Use chip_data not handler_data
handler_data should be reserved for flow handlers on the dependent
irq, not consumed by the parent irq code that is part of the irq_chip
code.  The msi_data pointer was already set in msidesc->irqhost->hostdata
and being copied to irq_data->chipdata in the msidesc->irqhost->map()
method called via create_irq_mapping, so we can obtain the pointer
from there and free the instance it in teardown_msi_irqs.

Also remove the unnecessary cast of irq_get_handler_data in the
cascade handler, which is the demux flow handler of the parent
msi interrupt.  (This is the expected usage for handler_data).

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:31:45 +10:00
Milton Miller
6c4c82e20a powerpc/fsl_msi: Don't abuse platform_data for driver_data
The msi platform device driver was abusing dev.platform_data for its
platform_driver_data.  Use the correct pointer for storage.

Platform_data is supposed to be for platforms to communicate to drivers
parameters that are not otherwise discoverable.  Its lifetime matches
the platform_device not the platform device driver.  It is generally
not needed for drivers that only support systems with device trees.

Signed-off-by: Milton Miller <miltonm@bga.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:31:43 +10:00
Milton Miller
7ee342bdc3 powerpc: Remove i8259 irq_host_ops->unmap
It was never called because the host is always IRQ_HOST_MAP_LEGACY.

And what it purported to do was mask the interrupt (which will already
have happend if we shutdown the interrupt), then synchronise_irq and
clear the chip pointer, both of which will have been be done by the
caller were we to call unmap on a legacy irq.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:31:41 +10:00
Milton Miller
df74e70ac2 powerpc: Remove trival irq_host_ops.unmap
These all just clear chip or chipdata fields, which will be done
by the generic code when we call irq_free_descs.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:31:39 +10:00
Milton Miller
2d441681a4 powerpc: Return early if irq_host lookup type is wrong
If for some reason the code incrorectly calls the wrong function to
manage the revmap, not only should we warn, we should take action.
However, in the paths we expect to be taken every delivered interrupt
change to WARN_ON_ONCE.  Use the if (WARN_ON(x)) format to get the
unlikely for free.

Signed-off-by: Milton Miller <miltonm@bga.com>
Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:31:37 +10:00
Milton Miller
3af259d155 powerpc: Radix trees are available before init_IRQ
Since the generic irq code uses a radix tree for sparse interrupts,
the initcall ordering has been changed to initialize radix trees before
irqs.   We no longer need to defer creating revmap radix trees to the
arch_initcall irq_late_init.

Also, the kmem caches are allocated so we don't need to use
zalloc_maybe_bootmem.

Signed-off-by: Milton Miller <miltonm@bga.com>
Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:31:35 +10:00
Milton Miller
e085255ebc powerpc/xics: Cleanup xics_host_map and ipi
Since we already have a special case in map to set the ipi handler, use
the desired flow.

If we don't find an ics to handle the interrupt complain instead of
returning 0 without having set a chip or handler.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:31:33 +10:00
Milton Miller
714542721b powerpc: Use bytes instead of bitops in smp ipi multiplexing
Since there are only 4 messages, we can replace the atomic bit set
(which uses atomic load reserve and store conditional sequence) with
a byte stores to seperate bytes.  We still have to perform a load
reserve and store conditional sequence to avoid loosing messages on
reception but we can do that with a single call to xchg.

The do {} while and __BIG_ENDIAN specific mask testing was chosen by
looking at the generated asm code.  On gcc-4.4, the bit masking becomes
a simple bit mask and test of the register returned from xchg without
storing and loading the value to the stack like attempts with a union
of bytes and an int (or worse, loading single bit constants from the
constant pool into non-voliatle registers that had to be preseved on
the stack).  The do {} while avoids an unconditional branch to the
end of the loop to test the entry / repeat condition of a while loop
and instead optimises for the expected single iteration of the loop.

We have a full mb() at the beginning to cover ordering between send,
ipi, and receive so we can use xchg_local and forgo the further
acquire and release barriers of xchg.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:31:31 +10:00
Milton Miller
1ece355b68 powerpc: Add kconfig for muxed smp ipi support
Compile the new smp ipi mux and demux code only if a platform
will make use of it.  The new config is selected as required.

The new cause_ipi smp op is only available conditionally to point out
configs where the select is required; this makes setting the op an
immediate fail instead of a deferred unresolved symbol at link.

This also creates a new config for power surge powermac upgrade support
that can be disabled in expert mode but is default on.

I also removed the depends / default y on CONFIG_XICS since it is selected
by PSERIES.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:31:05 +10:00
Milton Miller
23d72bfd8f powerpc: Consolidate ipi message mux and demux
Consolidate the mux and demux of ipi messages into smp.c and call
a new smp_ops callback to actually trigger the ipi.

The powerpc architecture code is optimised for having 4 distinct
ipi triggers, which are mapped to 4 distinct messages (ipi many, ipi
single, scheduler ipi, and enter debugger).  However, several interrupt
controllers only provide a single software triggered interrupt that
can be delivered to each cpu.  To resolve this limitation, each smp_ops
implementation created a per-cpu variable that is manipulated with atomic
bitops.  Since these lines will be contended they are optimialy marked as
shared_aligned and take a full cache line for each cpu.  Distro kernels
may have 2 or 3 of these in their config, each taking per-cpu space
even though at most one will be in use.

This consolidation removes smp_message_recv and replaces the single call
actions cases with direct calls from the common message recognition loop.
The complicated debugger ipi case with its muxed crash handling code is
moved to debug_ipi_action which is now called from the demux code (instead
of the multi-message action calling smp_message_recv).

I put a call to reschedule_action to increase the likelyhood of correctly
merging the anticipated scheduler_ipi() hook coming from the scheduler
tree; that single required call can be inlined later.

The actual message decode is a copy of the old pseries xics code with its
memory barriers and cache line spacing, augmented with a per-cpu unsigned
long based on the book-e doorbell code.  The optional data is set via a
callback from the implementation and is passed to the new cause-ipi hook
along with the logical cpu number.  While currently only the doorbell
implemntation uses this data it should be almost zero cost to retrieve and
pass it -- it adds a single register load for the argument from the same
cache line to which we just completed a store and the register is dead
on return from the call.  I extended the data element from unsigned int
to unsigned long in case some other code wanted to associate a pointer.

The doorbell check_self is replaced by a call to smp_muxed_ipi_resend,
conditioned on the CPU_DBELL feature.  The ifdef guard could be relaxed
to CONFIG_SMP but I left it with BOOKE for now.

Also, the doorbell interrupt vector for book-e was not calling irq_enter
and irq_exit, which throws off cpu accounting and causes code to not
realize it is running in interrupt context.  Add the missing calls.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:31:03 +10:00
Milton Miller
17f9c8a73b powerpc: Move smp_ops_t from machdep.h to smp.h
I can't see any reason these functions are needed by machdep.h
and they are all hidden by CONFIG_SMP with no UP alternative.

Also move the declarations for the fallback timebase ops, which
are used to fill in the smp ops.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:31:01 +10:00
Milton Miller
d4fc8fe1f6 powerpc: Remove stubbed beat smp support
I have no idea if the beat hypervisor supports multiple cpus in
a partition, but the code has not been touched since these stubs
were added in February of 2007 except to move them in April of 2008.
These are stubs: start_cpu always returns fail (which is dropped),
the message passing and reciving are empty functions, and the top
of file comment says "Incomplete".

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:30:59 +10:00
Milton Miller
a56555e573 powerpc: Remove alloc_maybe_bootmem for zalloc version
Replace all remaining callers of alloc_maybe_bootmem with
zalloc_maybe_bootmem.   The callsite in pci_dn is followed with a
memset to clear the memory, and not zeroing at the other callsites
in the celleb fake pci code could lead to following uninitialized
memory as pointers or even freeing said pointers on error paths.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:30:57 +10:00
Milton Miller
7ca8aa0924 powerpc: Remove powermac/pic.h
Its unused, and of the three declarations, one is duplicated in pmac.h,
the second is static and the third is renamed and static.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:30:55 +10:00
Milton Miller
3caba98fdd powerpc/mpic: Simplify ipi cpu mask handling
Now that MSG_ALL and MSG_ALL_BUT_SELF have been eliminated,
smp_mpic_mesage_pass no longer needs to lookup the cpumask just to
have mpic_send_ipi extract part of it and recode it in a NR_CPUS loop
by mpic_physmask.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 15:30:53 +10:00
Milton Miller
f1072939b6 powerpc: Remove checks for MSG_ALL and MSG_ALL_BUT_SELF
Now that smp_ops->smp_message_pass is always called with an (online) cpu
number for the target remove the checks for MSG_ALL and MSG_ALL_BUT_SELF.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:46 +10:00
Milton Miller
e047637132 powerpc: Remove call sites of MSG_ALL_BUT_SELF
The only user of MSG_ALL_BUT_SELF in the whole kernel tree is powerpc,
and it only uses it to start the debugger. Both debuggers always call
smp_send_debugger_break with MSG_ALL_BUT_SELF, and only mpic can do
anything more optimal than a loop over all online cpus, but all message
passing implementations have to code for this special delivery target.

Convert smp_send_debugger_break to take void and loop calling the smp_ops
message_pass function for each of the other cpus in the online cpumask.

Use raw_smp_processor_id() because we are either entering the debugger
or trying to start kdump and the additional warning it not useful were
it to trigger.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:46 +10:00
Milton Miller
2a116f3dd0 powerpc/mpic: Break cpumask abstraction earlier
mpic_set_affinity is allocating and freeing a cpumask var even though
it was breaking the cpumask abstraction when passing the mask to
mpic_physmask.  It also didn't have any check for allocatin failure.

Break the cpumask abstraction earlier and use simple bitwise and of the
bits from the mask with the bits of cpu_online_mask.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:45 +10:00
Milton Miller
ebc0421510 powerpc/mpic: Limit NR_CPUS loop to 32 bit
mpic_physmask was looping NR_CPUS times over a mask that was passed as
a u32. Since mpic is architecturaly limited to 32 physical cpus, clamp
the logical cpus to 32 when compiling (we could also clamp at runtime
to nr_cpu_ids).

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:45 +10:00
Milton Miller
aa79bc2167 powerpc: Call no-longer static setup_nr_cpu_ids instead of replicating it
c1854e0072 (powerpc: Set nr_cpu_ids early
and use it to free PACAs) copied the formerly static setup_nr_cpu_ids
from init/main.c but 34db18a054 (smp:
move smp setup functions to kernel/smp.c) moved it to kernel/smp.c
with a declaration in include/linux/smp.h, so we can call it instead of
replicating it.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:45 +10:00
Milton Miller
2cd947f175 powerpc: Use nr_cpu_ids in initial paca allocation
Now that we never set a cpu above nr_cpu_ids possible we can
limit our initial paca allocation to nr_cpu_ids.  We can then
clamp the number of cpus in platforms/iseries/setup.c.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:44 +10:00
Milton Miller
8657ae28dd powerpc: Respect nr_cpu_ids when calling set_cpu_possible and set_cpu_present
We should not set cpus above nr_cpu_ids to possible.  While we
will trigger a warning with CONFIG_CPUMASK_DEBUG, even then the mask
initializers will set the bits beyond what the iterators check and cause
nr_cpu_ids to increase.

Respecting nr_cpu_ids during setup will allow us to use it in our initial
paca allocation.  It can be reduced from NR_CPUS by the existing early param
nr_cpus=, which was added in 2b633e3fac (smp:
Use nr_cpus= to set nr_cpu_ids early).  We already call parse_early_parms
between finding the command line and allocating the pacas.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:44 +10:00
Milton Miller
7c82733744 powerpc/iseries: Cleanup and fix secondary startup
9cb82f2f46 (Make iSeries spin on
__secondary_hold_spinloop, like pSeries) added a load of current_set
but this load was repeated later and we don't even have the paca yet.
It also checked __secondary_hold_spinloop with a 32 bit compare instead
of a 64 bit compare.

b6f6b98a4e (Don't spin on sync instruction
at boot time) missed the copy of the startup code in iseries.

1426d5a3bd (Dynamically allocate pacas)
doesn't allow for pacas to be less than lppacas and recalculated the paca
location from the cpu id in r0 every time through the secondary loop.

Various revisions over time made the comments on conditional branches
confusing with respect to being a hold loop or forward progress

Mostly in-order description of the changes:

Replicate the few lines of code saved by the ugly scoped ifdef CONFIG_SMP
in the secondary loop between yielding on UP and marking time with the
hypervisor on SMP.  Always compile the iseries_secondary_yield loop and
use it if the cpu id is above nr_cpu_ids.  Change all forward progress
paths to be forward branches to the next numerical label.  Assign a
label to all loops.  Move all sync instructions from the loops to the
forward progress path.  Wait to load current_set until paca is set to go.
Move the iseries_secondary_smp_loop label to cover the whole spin loop.
Add HMT_MEDIUM when we make forward progress.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:44 +10:00
Milton Miller
bd9e5eefec powerpc/kdump64: Don't reference freed memory as pacas
Starting with 1426d5a3bd (powerpc:
Dynamically allocate pacas) the space for pacas beyond cpu_possible
is freed, but we failed to update the loop in crash.c.

Since c1854e0072 (powerpc: Set nr_cpu_ids
early and use it to free PACAs) the number of pacas allocated is
always nr_cpu_ids.

Signed-off-by: Milton Miller <miltonm@bga.com>
Cc: <stable@kernel.org> # .34.x
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:44 +10:00
Milton Miller
768d18ad6d powerpc: Don't search for paca in freed memory
Starting with 1426d5a3bd (powerpc:
Dynamically allocate pacas) we free the memory for pacas beyond
cpu_possible, but we failed to update the loop the secondary cpus use
to find their paca.  If the system has running cpu threads for which
the kernel did not allocate a paca for they will search the memory that
was freed.  For instance this could happen when the device tree for
a kdump kernel was not updated after a cpu hotplug, or the kernel is
running with more cpus than the kernel was configured.

Since c1854e0072 (powerpc: Set nr_cpu_ids
early and use it to free PACAs) we set nr_cpu_ids before telling the
cpus to advance, so use that to limit the search.

We can't reference nr_cpu_ids without CONFIG_SMP because it is defined
as 1 instead of a memory location, but any extra threads should be sent
to kexec_wait in that case anyways, so make that explicit and remove
the search loop for UP.

Note to stable: The fix also requires
c1854e0072 (powerpc: Set
nr_cpu_ids early and use it to free PACAs) to function.  Also
9d07bc841c (Properly handshake CPUs going
out of boot spin loop) affects the second chunk, specifically the branch
target was 3b before and is 4b after that patch, and there was a blank
line before the #ifdef CONFIG_SMP that was removed

Cc: <stable@kernel.org> # .34.x: c1854e0072 powerpc: Set nr_cpu_ids early
Cc: <stable@kernel.org> # .34.x
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:43 +10:00
Milton Miller
3d2cea732d powerpc/kexec: Fix memory corruption from unallocated slaves
Commit 1fc711f7ff (powerpc/kexec: Fix race
in kexec shutdown) moved the write to signal the cpu had exited the kernel
from before the transition to real mode in kexec_smp_wait to kexec_wait.

Unfornately it missed that kexec_wait is used both by cpus leaving the
kernel and by secondary slave cpus that were not allocated a paca for
what ever reason -- they could be beyond nr_cpus or not described in
the current device tree for whatever reason (for example, kexec-load
was not refreshed after a cpu hotplug operation).  Cpus coming through
that path they will write to paca[NR_CPUS] which is beyond the space
allocated for the paca data and overwrite memory not allocated to pacas
but very likely still real mode accessable).

Move the write back to kexec_smp_wait, which is used only by cpus that
found their paca, but after the transition to real mode.

Signed-off-by: Milton Miller <miltonm@bga.com>
Cc: <stable@kernel.org> # (1fc711f was backported to 2.6.32)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:43 +10:00
Anton Blanchard
f0e939ae37 powerpc/pseries: Print corrupt r3 in FWNMI code
I have a report of an FWNMI with an r3 value that we think is
corrupt, but since we don't print r3 we have no idea what was
wrong with it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:43 +10:00
Nishanth Aravamudan
eb0dd411bd pseries/iommu: Restore iommu table pointer when restoring iommu ops
When we swtich to direct dma ops, we set the dma data union to have the
dma offset.  When we switch back to iommu table ops because of a later
dma_set_mask, we need to restore the iommu table pointer. Without this
change, crashes have been observed on kexec where (for reasons still
being investigated) we fall back to a 32-bit dma mask on a particular
device and then panic because the table pointer is not valid.

The easiset way to find this value is to call
pci_dma_dev_setup_pSeriesLP which will search up the pci tree until it
finds the node with the table.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Milton Miller <miltonm@bga.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:43 +10:00
Anton Blanchard
40f1ce7fb7 powerpc: Remove ioremap_flags
We have a confusing number of ioremap functions. Make things just a
bit simpler by merging ioremap_flags and ioremap_prot.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:43 +10:00
Anton Blanchard
be135f4089 powerpc: Add ioremap_wc
Add ioremap_wc so drivers can request write combining on kernel
mappings.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:42 +10:00
Anton Blanchard
f5f0307f42 powerpc: Improve scheduling of system call entry instructions
After looking at our system call path, Mary Brown suggested that we
should put all mfspr SRR* instructions before any mtspr SRR*.

To test this I used a very simple null syscall (actually getppid)
testcase at http://ozlabs.org/~anton/junkcode/null_syscall.c

I tested with the following changes against the pseries_defconfig:

CONFIG_VIRT_CPU_ACCOUNTING=n
CONFIG_AUDIT=n

to remove the overhead of virtual CPU accounting and syscall
auditing.

POWER6:
baseline:       mean = 757.2 cycles       sd = 2.108
modified:       mean = 759.1 cycles       sd = 2.020

POWER7:
baseline:       mean = 411.4 cycles       sd = 0.138
modified:       mean = 404.1 cycles       sd = 0.109

So we have 1.77% improvement on POWER7 which looks significant. The
POWER6 suggest a 0.25% slowdown, but the results are within 1
standard deviation and may be in the noise.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:42 +10:00
Anton Blanchard
ba00ce1d6e powerpc: Remove static branch hint in giveup_altivec
A static branch hint will override dynamic branch prediction on
recent POWER CPUs. Since we are about to use more altivec in the
kernel remove the static hint in giveup_altivec that assumes
a userspace task is using altivec.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:42 +10:00
Anton Blanchard
d988f0e3f8 powerpc: Simplify 4k/64k copy_page logic
To make it easier to add optimised versions of copy_page, remove
the 4kB loop for 64kB pages and just do all the work in copy_page.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:42 +10:00
Anton Blanchard
37e0c21e9b powerpc/pseries: Enable iSCSI support for a number of cards
Enable iSCSI support for a number of cards. We had the base
networking devices enabled but forgot to enable iSCSI.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:41 +10:00
Anton Blanchard
32218bdd31 powerpc/pseries: Enable Emulex and Qlogic 10Gbit cards
Enable the Qlogic and Emulex 10Gbit adapters.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:41 +10:00
Stratos Psomadakis
2a2c29c1a5 powerpc/mm: Fix compiler warning in pgtable-ppc64.h [-Wunused-but-set-variable]
The variable 'old' is set but not used in the wrprotect functions in
arch/powerpc/include/asm/pgtable-ppc64.h, which can trigger a compiler warning.

Remove the variable, since it's not used anyway.

Signed-off-by: Stratos Psomadakis <psomas@ece.ntua.gr>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:41 +10:00
Nishanth Aravamudan
af442a1baa powerpc: Ensure dtl buffers do not cross 4k boundary
Future releases of fimrware will enforce a requirement that DTL buffers
do not cross a 4k boundary. Commit
127493d5dc satisfies this requirement for
CONFIG_VIRT_CPU_ACCOUNTING=y kernels, but if !CONFIG_VIRT_CPU_ACCOUNTING
&& CONFIG_DTL=y, the current code will fail at dtl registration time.
Fix this by making the kmem cache from
127493d5dc visible outside of setup.c and
using the same cache in both dtl.c and setup.c. This requires a bit of
reorganization to ensure ordering of the kmem cache and buffer
allocations.

Note: Since firmware now limits the size of the buffer, I made
dtl_buf_entries read-only in debugfs.

Tested with upcoming firmware with the 4 combinations of
CONFIG_VIRT_CPU_ACCOUNTING and CONFIG_DTL.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:41 +10:00
Nishanth Aravamudan
767303349e powerpc: Fix kexec with dynamic dma windows
When we kexec we look for a particular property added by the first
kernel, "linux,direct64-ddr-window-info", per-device where we already
have set up dynamic dma windows. The current code, though, wasn't
initializing the size of this property and thus when we kexec'd, we
would find the property but read uninitialized memory resulting in
garbage ddw values for the kexec'd kernel and panics. Fix this by
setting the size at enable_ddw() time and ensuring that the size of the
found property is valid at dupe_ddw_if_kexec() time.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:40 +10:00
Michal Marek
31355403db powerpc: Use the deterministic mode of ar
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:40 +10:00
Justin Mattock
93395febdb powerpc: Remove unused config in the Makefile
The patch below removes an unused config variable found by using a kernel
cleanup script.
Note: I did try to cross compile these but hit erros while doing so..
(gcc is not setup to cross compile) and am unsure if anymore needs to be done.
Please have a look if/when anybody has free time.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:40 +10:00
Michal Marek
c4f56af0f6 powerpc: Call gzip with -n
The timestamps recorded in the .gz files add no value.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:40 +10:00
kerstin jonsson
c560bbceaf powerpc/4xx: Fix regression in SMP on 476
commit c56e58537d breaks SMP support in PPC_47x chip.
 secondary_ti must be set to current thread info before callin kick_cpu or else
 start_secondary_47x will jump into void when trying to return to c-code.
 In the current setup secondary_ti is initialized before the CPU idle task is started
 and only the boot core will start. I am not sure this is the correct solution, but it
 makes SMP possible in my chip.
 Note! The HOTPLUG support probably need some fixing to, There is no trampoline code
 available in head_44x.S - start_secondary_resume?

Signed-off-by: Kerstin Jonsson <kerstin.jonsson@ericsson.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 13:09:22 +10:00
Ben Hutchings
35d215fbe4 powerpc/kexec: Fix build failure on 32-bit SMP
Commit b987812b3f left
crash_kexec_wait_realmode() undefined for UP.

Commit 7c7a81b53e defined it for UP but
left it undefined for 32-bit SMP.

Seems like people are getting confused by nested #ifdef's, so move the
definitions of crash_kexec_wait_realmode() after the #ifdef CONFIG_SMP
section.

Compile-tested with 32-bit UP, 32-bit SMP and 64-bit SMP configurations.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 13:09:21 +10:00
Benjamin Herrenschmidt
69e3cea8d5 powerpc/smp: Make start_secondary_resume available to all CPU variants
This should fix SMP & Hotplug builds on FSL BookE and 476

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 13:07:12 +10:00
Linus Torvalds
fce519588a Merge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6
* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6:
  drivercore: revert addition of of_match to struct device
  of: fix race when matching drivers
2011-05-18 13:25:57 -07:00
Linus Torvalds
7103dbed8e Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus:
  MIPS: Kludge IP27 build for 2.6.39.
  MIPS: AR7: Fix GPIO register size for Titan variant.
  MIPS: Fix duplicate invocation of notify_die.
  MIPS: RB532: Fix iomap resource size miscalculation.
2011-05-18 13:21:43 -07:00