'cpupower frequency-info -ln' returns kHz values on systems with MHz range
minimum CPU frequency range. For example, on a 800MHz to 4.20GHz system
the command returns
hardware limits: 800000 MHz - 4.200000 GHz
The code that causes this error can be removed. The next else if clause
will handle the output correctly such that
hardware limits: 800.000 MHz - 4.200000 GHz
is displayed correctly.
[v2]: Remove two lines instead of fixing broken code.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Renninger <trenn@suse.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The mmap(2) syscall suffers from the ABI anti-pattern of not validating
unknown flags. However, proposals like MAP_SYNC need a mechanism to
define new behavior that is known to fail on older kernels without the
support. Define a new MAP_SHARED_VALIDATE flag pattern that is
guaranteed to fail on all legacy mmap implementations.
It is worth noting that the original proposal was for a standalone
MAP_VALIDATE flag. However, when that could not be supported by all
archs Linus observed:
I see why you *think* you want a bitmap. You think you want
a bitmap because you want to make MAP_VALIDATE be part of MAP_SYNC
etc, so that people can do
ret = mmap(NULL, size, PROT_READ | PROT_WRITE, MAP_SHARED
| MAP_SYNC, fd, 0);
and "know" that MAP_SYNC actually takes.
And I'm saying that whole wish is bogus. You're fundamentally
depending on special semantics, just make it explicit. It's already
not portable, so don't try to make it so.
Rename that MAP_VALIDATE as MAP_SHARED_VALIDATE, make it have a value
of 0x3, and make people do
ret = mmap(NULL, size, PROT_READ | PROT_WRITE, MAP_SHARED_VALIDATE
| MAP_SYNC, fd, 0);
and then the kernel side is easier too (none of that random garbage
playing games with looking at the "MAP_VALIDATE bit", but just another
case statement in that map type thing.
Boom. Done.
Similar to ->fallocate() we also want the ability to validate the
support for new flags on a per ->mmap() 'struct file_operations'
instance basis. Towards that end arrange for flags to be generically
validated against a mmap_supported_flags exported by 'struct
file_operations'. By default all existing flags are implicitly
supported, but new flags require MAP_SHARED_VALIDATE and
per-instance-opt-in.
Cc: Jan Kara <jack@suse.cz>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Suggested-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The injected badrange entries can only be cleared from the kernel's
accounting by writing to the affected blocks, so when such a write sends
the clear errror DSM to nfit_test, also clear the ranges from
nfit_test's badrange list. This lets an 'ARS Inject error status' DSM to
return the correct status, omitting the cleared ranges.
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add nfit_test emulation for the new ACPI 6.2 error injectino DSMs.
This will allow unit tests to selectively inject the errors they wish to
test for.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[vishal: Move injection functions to ND_CMD_CALL]
[vishal: Add support for the notification option]
[vishal: move an nfit_test private definition into a local header]
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
nfit_test needs to use the poison list manipulation code as well. Make
it more generic and in the process rename poison to badrange, and move
all the related helpers to a new file.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[vishal: Add badrange.o to nfit_test's Kbuild]
[vishal: add a missed include in bus.c for the new badrange functions]
[vishal: rename all instances of 'be' to 'bre']
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
6dVh26uchcEQLN/XqUDt
=x306
-----END PGP SIGNATURE-----
Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull initial SPDX identifiers from Greg KH:
"License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the
'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
binding shorthand, which can be used instead of the full boiler plate
text.
This patch is based on work done by Thomas Gleixner and Kate Stewart
and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset
of the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to
license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied
to a file was done in a spreadsheet of side by side results from of
the output of two independent scanners (ScanCode & Windriver)
producing SPDX tag:value files created by Philippe Ombredanne.
Philippe prepared the base worksheet, and did an initial spot review
of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537
files assessed. Kate Stewart did a file by file comparison of the
scanner results in the spreadsheet to determine which SPDX license
identifier(s) to be applied to the file. She confirmed any
determination that was not immediately clear with lawyers working with
the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained
>5 lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that
became the concluded license(s).
- when there was disagreement between the two scanners (one detected
a license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply
(and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases,
confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.
The Windriver scanner is based on an older version of FOSSology in
part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot
checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect
the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial
patch version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch
license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
License cleanup: add SPDX license identifier to uapi header files with a license
License cleanup: add SPDX license identifier to uapi header files with no license
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
This update consists of a single fix to a regression to printing
individual test results to the console. An earlier commit changed it
to printing just the summary of results, which will negatively impact
users that rely on console log to look at the individual test failures.
This fix makes it optional to print summary and by default results get
printed to the console.
-----BEGIN PGP SIGNATURE-----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=ZvGB
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"This consists of a single fix to a regression to printing individual
test results to the console. An earlier commit changed it to printing
just the summary of results, which will negatively impact users that
rely on console log to look at the individual test failures.
This fix makes it optional to print summary and by default results get
printed to the console"
* tag 'linux-kselftest-4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: lib.mk: print individual test results to console by default
Use PATH_MAX instead of hardcoded array size 256
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Many user space API headers have licensing information, which is either
incomplete, badly formatted or just a shorthand for referring to the
license under which the file is supposed to be. This makes it hard for
compliance tools to determine the correct license.
Update these files with an SPDX license identifier. The identifier was
chosen based on the license information in the file.
GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license
identifier with the added 'WITH Linux-syscall-note' exception, which is
the officially assigned exception identifier for the kernel syscall
exception:
NOTE! This copyright does *not* cover user programs that use kernel
services by normal system calls - this is merely considered normal use
of the kernel, and does *not* fall under the heading of "derived work".
This exception makes it possible to include GPL headers into non GPL
code, without confusing license compliance tools.
Headers which have either explicit dual licensing or are just licensed
under a non GPL license are updated with the corresponding SPDX
identifier and the GPLv2 with syscall exception identifier. The format
is:
((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE)
SPDX license identifiers are a legally binding shorthand, which can be
used instead of the full boiler plate text. The update does not remove
existing license information as this has to be done on a case by case
basis and the copyright holders might have to be consulted. This will
happen in a separate step.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne. See the previous patch in this series for the
methodology of how this patch was researched.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many user space API headers are missing licensing information, which
makes it hard for compliance tools to determine the correct license.
By default are files without license information under the default
license of the kernel, which is GPLV2. Marking them GPLV2 would exclude
them from being included in non GPLV2 code, which is obviously not
intended. The user space API headers fall under the syscall exception
which is in the kernels COPYING file:
NOTE! This copyright does *not* cover user programs that use kernel
services by normal system calls - this is merely considered normal use
of the kernel, and does *not* fall under the heading of "derived work".
otherwise syscall usage would not be possible.
Update the files which contain no license information with an SPDX
license identifier. The chosen identifier is 'GPL-2.0 WITH
Linux-syscall-note' which is the officially assigned identifier for the
Linux syscall exception. SPDX license identifiers are a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne. See the previous patch in this series for the
methodology of how this patch was researched.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pick up some of the MPX commits that modify the syscall entry code,
to have a common base and to reduce conflicts.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Lets also add test cases to cover all possible data_meta access tests
for good/bad access cases so we keep tracking them.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two minor cleanups after Dave's recent merge in f8ddadc4db
("Merge git://git.kernel.org...") of net into net-next in
order to get the code in line with what was done originally
in the net tree: i) use max() instead of max_t() since both
ranges are u16, ii) don't split the direct access test cases
in the middle with bpf_exit test cases from 390ee7e29f
("bpf: enforce return code for cgroup-bpf programs").
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Smooth Cong Wang's bug fix into 'net-next'. Basically put
the bulk of the tcf_block_put() logic from 'net' into
tcf_block_put_ext(), but after the offload unbind.
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZ9kEFAAoJEHm+PkMAQRiGw6wH/0j197qyGd0hkVFMJO6LAgN3
KQWS4nZ5BkVDocwv0RVnUJTtXqU1eozFgdVEtSoaFXpzlHGuptR2Tau9efDCJ7w3
/utZxqvhGebZd2T+j+/o/LE8BRQxhADBNJq2D/o0WNt8ecxuG0GIkhkEYt/o3z1v
/sxlwVwzXB7Dc/h1WcgGJG7cS6L9KzzAzGAS/iNvdFrPOygHBv8c0MxVZIiBIeeK
1nZdyvbyM8uenSyG+prGt9ENrqXZxxfwUxIchi2V7A9m1WmD5zijNkf1JCWji/O+
UsA1auxna7MwoxjxqZuGm4MlKOwZ+8xutk4JGgc+aP/ulndJbJYu+4op/3vaFBM=
=Mhx+
-----END PGP SIGNATURE-----
Backmerge tag 'v4.14-rc7' into drm-next
Linux 4.14-rc7
Requested by Ben Skeggs for nouveau to avoid major conflicts,
and things were getting a bit conflicty already, esp around amdgpu
reverts.
When libbfd is not used, it doesn't show proper function name and reuse
the original symbol of the sample. That's because it passes the
original sym to inline_list__append(). As `addr2line -f` returns
function names as well, use that to create an inline_sym and pass it to
inline_list__append().
For example, following data shows that inlined entries of main have same
name (main).
Before:
$ perf report -g srcline -q | head
45.22% inlining libm-2.26.so [.] __hypot_finite
|
---__hypot_finite ??:0
|
|--44.15%--hypot ??:0
| main complex:589
| main complex:597
| main complex:654
| main complex:664
| main inlining.cpp:14
After:
$ perf report -g srcline -q | head
45.22% inlining libm-2.26.so [.] __hypot_finite
|
---__hypot_finite
|
|--44.15%--hypot
| std::__complex_abs complex:589 (inlined)
| std::abs<double> complex:597 (inlined)
| std::_Norm_helper<true>::_S_do_it<double> complex:654 (inlined)
| std::norm<double> complex:664 (inlined)
| main inlining.cpp:14
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20171031020654.31163-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When libbfd is not used, addr2inlines() executes `addr2line -i` and
process output line by line. But it resets filename to NULL in the loop
so getline() allocates additional memory everytime instead of realloc.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20171031020654.31163-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
sockmap test is using two programs that use bpf_trace_printk()
which prints into trace_pipe, but nothing is reading it.
Remove it.
Fixes: 6f6d33f3b3 ("bpf: selftests add sockmap tests")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that SK_REDIRECT is no longer a valid return code. Remove it
from the UAPI completely. Then do a namespace remapping internal
to sockmap so SK_REDIRECT is no longer externally visible.
Patchs primary change is to do a namechange from SK_REDIRECT to
__SK_REDIRECT
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tdc.py reads a bunch of test cases in json files. When a json file
cannot be parsed, tdc just exits and does not run any tests.
This patch will cause tdc to print a message with the file name and
line number, then that file will be ignored and the rest of the tests
will be processed.
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check if tcase[k] is an instance of a list (is or is derived from list)
instead of checking if it is a list.
This will be useful if the data structures change to be something
that implements list, instead of being an actual list. In that
case, this code will not have to change.
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the config customization into a site-local file
tdc_config_local.py, so that updates of the tdc test
software does not require hand-editing of the config.
This patch includes a template for the site-local
customization file.
In addition, this makes it easy to revert to a stock
tdc environment for testing the test framework and/or
the core tests.
Also it makes it harder for any custom config to be
submitted back to the kernel tdc.
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ignore .pyc files, "python compiled" files, that get created
when a python script is run. They should never be committed.
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As part of documentation, supply some very simple test cases
to illustrate how test cases work. One test case shows
commands in the setup, command, verify and teardown stages.
Other test cases show how to have a working test case that
does not have commands in the setup, verify and/or teardown
stages.
Specifically, the command lists for setup and teardown can
be empty. And the verify command must have a command, but
it can be /bin/true. The regex must have a string, we
recommend a single space, and the count of matches must be
zero if you do not want to use the match feature of verify.
Verify will always look for a return code of success (0)
so we give /bin/true when we do not want to make a check
there.
Also, update the documentation for testcases to be more
specific in the cases of:
- accepting non-success return codes in setup and
teardown stages
- how to write the test when no setup, teardown
and/or verify are desired.
To run the example test cases:
$ sudo -E ./tdc.py -f creating-testcases/example.json -l
1f: (example) simple test to test framework
2f: (example) simple test, no need for verify
3f: (example) simple test, no need for setup or teardown (or verify)
$ sudo -E ./tdc.py -f creating-testcases/example.json
Test 1f: simple test to test framework
Test 2f: simple test, no need for verify
Test 3f: simple test, no need for setup or teardown (or verify)
All test results:
1..3
ok 1 1f simple test to test framework
ok 2 2f simple test, no need for verify
ok 3 3f simple test, no need for setup or teardown (or verify)
$
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change run_tests to print individual test results to console by default.
Introduce "summary" option to print individual test results to a file
/tmp/test_name and just print the summary to the console.
This change is necessary to support use-cases where test machines get
rebooted once tests are run and the console log should contain the full
results.
In the following example, individual test results with "summary=1" option
are written to /tmp/kcmp_test
make --silent TARGETS=kcmp kselftest
TAP version 13
selftests: kcmp_test
========================================
pid1: 30126 pid2: 30127 FD: 2 FILES: 2 VM: 1 FS: 2 SIGHAND: 2 IO:
0 SYSVSEM: 0 INV: -1
PASS: 0 returned as expected
PASS: 0 returned as expected
FAIL: 0 expected but -1 returned (Invalid argument)
Pass 2 Fail 1 Xfail 0 Xpass 0 Skip 0 Error 0
1..3
Bail out!
Pass 2 Fail 1 Xfail 0 Xpass 0 Skip 0 Error 0
1..3
Pass 0 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
1..0
ok 1..1 selftests: kcmp_test [PASS]
make --silent TARGETS=kcmp summary=1 kselftest
TAP version 13
selftests: kcmp_test
========================================
ok 1..1 selftests: kcmp_test [PASS]
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
For some unknown reason there is no entry in tracefs's syscalls for
kcmp, i.e. no tracefs/events/syscalls/sys_{enter,exit}_kcmp, so we need
to provide a data dictionary for the fields.
To beautify the 'type' argument we automatically generate a strarray
from tools/include/uapi/kcmp.h, the idx1 and idx2 args, nowadays used
only if type == KCMP_FILE, are masked for all the other types and a
lookup is made for the thread and fd to show the path, if possible,
getting it from the probe:vfs_getname if in place or from procfs, races
allowing.
A system wide strace like tracing session, with callchains shows just
one user so far in this fedora 25 machine:
# perf trace --max-stack 5 -e kcmp
<SNIP>
1502914.400 ( 0.001 ms): systemd/1 kcmp(pid1: 1 (systemd), pid2: 1 (systemd), type: FILE, idx1: 271<socket:[4723475]>, idx2: 25<socket:[4788686]>) = -1 ENOSYS Function not implemented
syscall (/usr/lib64/libc-2.25.so)
same_fd (/usr/lib/systemd/libsystemd-shared-233.so)
service_add_fd_store (/usr/lib/systemd/systemd)
service_notify_message.lto_priv.127 (/usr/lib/systemd/systemd)
1502914.407 ( 0.001 ms): systemd/1 kcmp(pid1: 1 (systemd), pid2: 1 (systemd), type: FILE, idx1: 270<socket:[4726396]>, idx2: 25<socket:[4788686]>) = -1 ENOSYS Function not implemented
syscall (/usr/lib64/libc-2.25.so)
same_fd (/usr/lib/systemd/libsystemd-shared-233.so)
service_add_fd_store (/usr/lib/systemd/systemd)
service_notify_message.lto_priv.127 (/usr/lib/systemd/systemd)
<SNIP>
The backtraces seem to agree this is really kcmp(), but this system
doesn't have the sys_kcmp(), bummer:
# uname -a
Linux jouet 4.14.0-rc3+ #1 SMP Fri Oct 13 12:21:12 -03 2017 x86_64 x86_64 x86_64 GNU/Linux
# grep kcmp /proc/kallsyms
ffffffffb60b8890 W sys_kcmp
$ grep CONFIG_CHECKPOINT_RESTORE ../build/v4.14.0-rc3+/.config
# CONFIG_CHECKPOINT_RESTORE is not set
$
So systemd uses it, good fedora kernel config has it:
$ grep CONFIG_CHECKPOINT_RESTORE /boot/config-4.13.4-200.fc26.x86_64
CONFIG_CHECKPOINT_RESTORE=y
[acme@jouet linux]$
/me goes to rebuild a kernel...
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-gz5fca968viw8m7hryjqvrln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One that given a pid and a fd, will try to get the path for that fd.
Will be used in the upcoming kcmp's KCMP_FILE beautifier.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-7ketygp2dvs9h13wuakfncws@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will use it to generate tables for beautifying kcmp's 'type' arg.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-r35zr79invmpinfe1zu57cas@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Milian Wolff found a problem he described in [1] and that for him would
get fixed:
"Note how most of the large offset values are now gone. Most notably, we
get proper srcline resolution for the random.h and complex headers."
Then Namhyung found the root cause:
"I looked into it and found a bug handling cumulative (children)
entries. For children entries that have no self period, the al->addr (so
he->ip) ends up having an doubly-mapped address.
It seems to be there from the beginning but only affects entries that
have no srclines - finding srcline itself is done using a different
address but it will show the invalid address if no srcline was found. I
think we should fix the commit c7405d85d7 ("perf tools: Update cpumode
for each cumulative entry")."
[1] https://lkml.kernel.org/r/20171018185350.14893-7-milian.wolff@kdab.com
Reported-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: kernel-team@lge.com
Fixes: c7405d85d7 ("perf tools: Update cpumode for each cumulative entry")
Link: https://lkml.kernel.org/r/20171020051533.GA2746@sejong
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes: 31c2611b66 ("selftests: Introduce a new test case to tc testsuite")
Fixes: 76b903ee19 ("selftests: Introduce tc testsuite")
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We should support this because it would allow easily to collect metrics
for different threads in applications.
Original patch from posted by Jin Yao in here [1].
1. Current output, for example:
root@skl:/tmp# perf stat --per-thread -p 21623
^C
Performance counter stats for process id '21623':
vmstat-21623 0.517479 task-clock (msec) # 0.000 CPUs utilized
vmstat-21623 1 context-switches
vmstat-21623 0 cpu-migrations
vmstat-21623 0 page-faults
vmstat-21623 461,306 cycles
vmstat-21623 630,724 instructions
vmstat-21623 136,265 branches
vmstat-21623 2,520 branch-misses
1.444020756 seconds time elapsed
root@skl:/tmp# perf stat --per-thread --metrics ipc -p 21623
^C
Performance counter stats for process id '21623':
vmstat-21623 631,185 inst_retired.any
vmstat-21623 605,893 cpu_clk_unhalted.thread
1.415679293 seconds time elapsed
2. With this patch, the result would be:
root@skl:/tmp# perf stat --per-thread -p 21623
^C
Performance counter stats for process id '21623':
vmstat-21623 0.533759 task-clock (msec) # 0.000 CPUs utilized
vmstat-21623 1 context-switches # 0.002 M/sec
vmstat-21623 0 cpu-migrations # 0.000 K/sec
vmstat-21623 0 page-faults # 0.000 K/sec
vmstat-21623 473,896 cycles # 0.888 GHz
vmstat-21623 631,072 instructions # 1.33 insn per cycle
vmstat-21623 136,307 branches # 255.372 M/sec
vmstat-21623 2,524 branch-misses # 1.85% of all branches
1.544862861 seconds time elapsed
root@skl:/tmp# perf stat --per-thread --metrics ipc -p 21623
^C
Performance counter stats for process id '21623':
vmstat-21623 1,259,104 inst_retired.any # 1.2 IPC
vmstat-21623 1,056,756 cpu_clk_unhalted.thread
2.040954502 seconds time elapsed
[1] https://marc.info/?l=linux-kernel&m=150777054620511&w=2
Originally-from: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-tr8ntktxmy4qc5769ajg5u6c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the shadow stats scale computation to the
perf_stat__update_shadow_stats() function, so it's centralized and we
don't forget to do it. It also saves few lines of code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-htg7mmyxv6pcrf57qyo6msid@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding perf_data_file__write function to provide single file write
operation.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-c3f9p4xzykr845ktqcek6p4t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add struct perf_data_file to represent a single file within a perf_data
struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-c3f9p4xzykr845ktqcek6p4t@git.kernel.org
[ Fixup recent changes in 'perf script --per-event-dump' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_data_file to perf_data, because we will add the
possibility to have multiple files under perf.data, so the 'perf_data'
name fits better.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-39wn4d77phel3dgkzo3lyan0@git.kernel.org
[ Fixup recent changes in 'perf script --per-event-dump' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Several conflicts here.
NFP driver bug fix adding nfp_netdev_is_nfp_repr() check to
nfp_fl_output() needed some adjustments because the code block is in
an else block now.
Parallel additions to net/pkt_cls.h and net/sch_generic.h
A bug fix in __tcp_retransmit_skb() conflicted with some of
the rbtree changes in net-next.
The tc action RCU callback fixes in 'net' had some overlap with some
of the recent tcf_block reworking.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix route leak in xfrm_bundle_create().
2) In mac80211, validate user rate mask before configuring it. From
Johannes Berg.
3) Properly enforce memory limits in fair queueing code, from Toke
Hoiland-Jorgensen.
4) Fix lockdep splat in inet_csk_route_req(), from Eric Dumazet.
5) Fix TSO header allocation and management in mvpp2 driver, from Yan
Markman.
6) Don't take socket lock in BH handler in strparser code, from Tom
Herbert.
7) Don't show sockets from other namespaces in AF_UNIX code, from
Andrei Vagin.
8) Fix double free in error path of tap_open(), from Girish Moodalbail.
9) Fix TX map failure path in igb and ixgbe, from Jean-Philippe Brucker
and Alexander Duyck.
10) Fix DCB mode programming in stmmac driver, from Jose Abreu.
11) Fix err_count handling in various tunnels (ipip, ip6_gre). From Xin
Long.
12) Properly align SKB head before building SKB in tuntap, from Jason
Wang.
13) Avoid matching qdiscs with a zero handle during lookups, from Cong
Wang.
14) Fix various endianness bugs in sctp, from Xin Long.
15) Fix tc filter callback races and add selftests which trigger the
problem, from Cong Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits)
selftests: Introduce a new test case to tc testsuite
selftests: Introduce a new script to generate tc batch file
net_sched: fix call_rcu() race on act_sample module removal
net_sched: add rtnl assertion to tcf_exts_destroy()
net_sched: use tcf_queue_work() in tcindex filter
net_sched: use tcf_queue_work() in rsvp filter
net_sched: use tcf_queue_work() in route filter
net_sched: use tcf_queue_work() in u32 filter
net_sched: use tcf_queue_work() in matchall filter
net_sched: use tcf_queue_work() in fw filter
net_sched: use tcf_queue_work() in flower filter
net_sched: use tcf_queue_work() in flow filter
net_sched: use tcf_queue_work() in cgroup filter
net_sched: use tcf_queue_work() in bpf filter
net_sched: use tcf_queue_work() in basic filter
net_sched: introduce a workqueue for RCU callbacks of tc filter
sctp: fix some type cast warnings introduced since very beginning
sctp: fix a type cast warnings that causes a_rwnd gets the wrong value
sctp: fix some type cast warnings introduced by transport rhashtable
sctp: fix some type cast warnings introduced by stream reconf
...
In this patchset, we fixed a tc bug. This patch adds the test case
that reproduces the bug. To run this test case, user should specify
an existing NIC device:
# sudo ./tdc.py -d enp4s0f0
This test case belongs to category "flower". If user doesn't specify
a NIC device, the test cases belong to "flower" will not be run.
In this test case, we create 1M filters and all filters share the same
action. When destroying all filters, kernel should not panic. It takes
about 18s to run it.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
# ./tdc_batch.py -h
usage: tdc_batch.py [-h] [-n NUMBER] [-o] [-s] [-p] device file
TC batch file generator
positional arguments:
device device name
file batch file name
optional arguments:
-h, --help show this help message and exit
-n NUMBER, --number NUMBER
how many lines in batch file
-o, --skip_sw skip_sw (offload), by default skip_hw
-s, --share_action all filters share the same action
-p, --prio all filters have different prio
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a completion file for bash. The completion function runs bpftool
when needed, making it smart enough to help users complete ids or tags
for eBPF programs and maps currently on the system.
Update Makefile to install completion file to
/usr/share/bash-completion/completions when running `make install`.
Emacs file mode and (at the end) Vim modeline have been added, to keep
the style in use for most existing bash completion files. In this, it
differs from tools/perf/perf-completion.sh, which seems to be the only
other completion file among the kernel sources repository. This is also
valid for indent style: 4-space indents, as in other completion files.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recent additions to support multiple programs in cgroups impose
a strict requirement, "all yes is yes, any no is no". To enforce
this the infrastructure requires the 'no' return code, SK_DROP in
this case, to be 0.
To apply these rules to SK_SKB program types the sk_actions return
codes need to be adjusted.
This fix adds SK_PASS and makes 'SK_DROP = 0'. Finally, remove
SK_ABORTED to remove any chance that the API may allow aborted
program flows to be passed up the stack. This would be incorrect
behavior and allow programs to break existing policies.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have defined YY_USER_ACTION to keep trace of the column location
during events parsing, but we need to clean it up when we call REJECT.
When REJECT is called, the lexer shrinks the text and re-runs the
matching, so we need to address it in resuming the previous location
value to keep it correct for error display, like:
Before:
$ perf stat -e 'cpu/uops_executed.core,krava/' true
event syntax error: '..38;5;9:mi=01;05;37;41:su=48;5;196;38;5;15:sg=48;5;1\
1;38;5;16:ca=48;5;196;38;5;226:tw=48;5;10;38;5;16:ow=48;5;10;38;5;21:st=48;5;\
21;38;50
�'
\___ unknown term
After:
$ ./perf stat -e 'cpu/uops_executed.core,krava/' true
event syntax error: '..cuted.core,krava/'
\___ unknown term
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Andi Kleen <ak@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vug2hchlny30jfsfrumbym26@git.kernel.org
Link: http://lkml.kernel.org/r/20171009140944.GD28623@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will use it to generate tables for beautifying prctl's 'option' arg
and some of the others eventually.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-cg8mpmz4hk9nfih685emnbk9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a new option to dump trace output to files named by the
monitored events and update perf-script documentation accordingly.
Shown below is output of perf script command with the newly introduced
option.
$ perf record -e cycles -e cs -ag -- sleep 1
$ perf script --per-event-dump
$ ls
perf.data.cycles.dump perf.data.cs.dump
Without per-event-dump support, drawing flamegraphs for different events
would require post processing to separate events. You can monitor only
one event at a time if you want to get flamegraphs for different events.
Using this option, you can get the trace output files named by the
monitored events, and could draw flamegraphs according to the event's
name.
Based-on-a-patch-by: yuzhoujian <yuzhoujian@didichuxing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1508921599-10832-3-git-send-email-yuzhoujian@didichuxing.com
Link: http://lkml.kernel.org/n/tip-8ngzsjdhgiovkupl3r5yy570@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we started using it for stats and did it not just in
builtin-stat.c, but also for builtin-script.c, then it stopped being a
tool private area, so introduce a new pointer for these stats and leave
->priv to its original purpose.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Fixes: cfc8874a48 ("perf script: Process cpu/threads maps")
Link: http://lkml.kernel.org/n/tip-jtpzx3rjqo78snmmsdzwb2eb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Another case where we a1a587073c ("perf script: Use fprintf like
printing uniformly") forgot to redirect output to the FILE descriptor,
fix this too.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Link: http://lkml.kernel.org/n/tip-jmwx4pgfezw98ezfoj9t957s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have facilities for reporting unexpected, unlikely errors, use them.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Link: http://lkml.kernel.org/n/tip-c7j22xfjf1j773g7ufp607q0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In a1a587073c ("perf script: Use fprintf like printing uniformly")
there were a few cases that were missed, fix it.
Reported-by: yuzhoujian <yuzhoujian@didichuxing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-sq9hvfk5mkjdqzlpyiq7jkos@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One possible cause of failure for `bpftool {prog|map} pin * file FILE`
is the FILE not being in an eBPF virtual file system (bpffs). In this
case, make bpftool attempt to mount bpffs on the parent directory of the
FILE. Then, if this operation is successful, try again to pin the
object.
The code for mnt_bpffs() is a copy of function bpf_mnt_fs() from
iproute2 package (under lib/bpf.c, taken at commit 4b73d52f8a81), with
modifications regarding handling of error messages.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Perf top is often crashing at very random locations on powerpc. After
investigating, I found the crash only happens when sample is of zero
length symbol. Powerpc kernel has many such symbols which does not
contain length details in vmlinux binary and thus start and end
addresses of such symbols are same.
Structure
struct sym_hist {
u64 nr_samples;
u64 period;
struct sym_hist_entry addr[0];
};
has last member 'addr[]' of size zero. 'addr[]' is an array of addresses
that belongs to one symbol (function). If function consist of 100
instructions, 'addr' points to an array of 100 'struct sym_hist_entry'
elements. For zero length symbol, it points to the *empty* array, i.e.
no members in the array and thus offset 0 is also invalid for such
array.
static int __symbol__inc_addr_samples(...)
{
...
offset = addr - sym->start;
h = annotation__histogram(notes, evidx);
h->nr_samples++;
h->addr[offset].nr_samples++;
h->period += sample->period;
h->addr[offset].period += sample->period;
...
}
Here, when 'addr' is same as 'sym->start', 'offset' becomes 0, which is
valid for normal symbols but *invalid* for zero length symbols and thus
updating h->addr[offset] causes memory corruption.
Fix this by adding one dummy element for zero length symbols.
Link: https://lkml.org/lkml/2016/10/10/148
Fixes: edee44be59 ("perf annotate: Don't throw error for zero length symbols")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1508854806-10542-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we have caches in place to speed up the process of finding
inlined frames and srcline information repeatedly, we can enable this
useful option by default.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171019113836.5548-6-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On one hand this ensures that the memory is properly freed when the DSO
gets freed. On the other hand this significantly speeds up the
processing of the callchain nodes when lots of srclines are requested.
For one of my data files e.g.:
Before:
Performance counter stats for 'perf report -s srcline -g srcline --stdio':
52496.495043 task-clock (msec) # 0.999 CPUs utilized
634 context-switches # 0.012 K/sec
2 cpu-migrations # 0.000 K/sec
191,561 page-faults # 0.004 M/sec
165,074,498,235 cycles # 3.144 GHz
334,170,832,408 instructions # 2.02 insn per cycle
90,220,029,745 branches # 1718.591 M/sec
654,525,177 branch-misses # 0.73% of all branches
52.533273822 seconds time elapsedProcessed 236605 events and lost 40 chunks!
After:
Performance counter stats for 'perf report -s srcline -g srcline --stdio':
22606.323706 task-clock (msec) # 1.000 CPUs utilized
31 context-switches # 0.001 K/sec
0 cpu-migrations # 0.000 K/sec
185,471 page-faults # 0.008 M/sec
71,188,113,681 cycles # 3.149 GHz
133,204,943,083 instructions # 1.87 insn per cycle
34,886,384,979 branches # 1543.214 M/sec
278,214,495 branch-misses # 0.80% of all branches
22.609857253 seconds time elapsed
Note that the difference is only this large when `--inline` is not
passed. In such situations, we would use the inliner cache and thus do
not run this code path that often.
I think that this cache should actually be used in other places, too.
When looking at the valgrind leak report for perf report, we see tons of
srclines being leaked, most notably from calls to
hist_entry__get_srcline. The problem is that get_srcline has many
different formatting options (show_sym, show_addr, potentially even
unwind_inlines when calling __get_srcline directly). As such, the
srcline cannot easily be cached for all calls, or we'd have to add
caches for all formatting combinations (6 so far). An alternative would
be to remove the formatting options and handle that on a different level
- i.e. print the sym/addr on demand wherever we actually output
something. And the unwind_inlines could be moved into a separate
function that does not return the srcline.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171019113836.5548-4-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When no inlined frames could be found for a given address, we did not
store this information anywhere. That means we potentially do the costly
inliner lookup repeatedly for cases where we know it can never succeed.
This patch makes dso__parse_addr_inlines always return a valid
inline_node. It will be empty when no inliners are found. This enables
us to cache the empty list in the DSO, thereby improving the performance
when many addresses fail to find the inliners.
For my trivial example, the performance impact is already quite
significant:
Before:
~~~~~
Performance counter stats for 'perf report --stdio --inline -g srcline -s srcline' (5 runs):
594.804032 task-clock (msec) # 0.998 CPUs utilized ( +- 0.07% )
53 context-switches # 0.089 K/sec ( +- 4.09% )
0 cpu-migrations # 0.000 K/sec ( +-100.00% )
5,687 page-faults # 0.010 M/sec ( +- 0.02% )
2,300,918,213 cycles # 3.868 GHz ( +- 0.09% )
4,395,839,080 instructions # 1.91 insn per cycle ( +- 0.00% )
939,177,205 branches # 1578.969 M/sec ( +- 0.00% )
11,824,633 branch-misses # 1.26% of all branches ( +- 0.10% )
0.596246531 seconds time elapsed ( +- 0.07% )
~~~~~
After:
~~~~~
Performance counter stats for 'perf report --stdio --inline -g srcline -s srcline' (5 runs):
113.111405 task-clock (msec) # 0.990 CPUs utilized ( +- 0.89% )
29 context-switches # 0.255 K/sec ( +- 54.25% )
0 cpu-migrations # 0.000 K/sec
5,380 page-faults # 0.048 M/sec ( +- 0.01% )
432,378,779 cycles # 3.823 GHz ( +- 0.75% )
670,057,633 instructions # 1.55 insn per cycle ( +- 0.01% )
141,001,247 branches # 1246.570 M/sec ( +- 0.01% )
2,346,845 branch-misses # 1.66% of all branches ( +- 0.19% )
0.114222393 seconds time elapsed ( +- 1.19% )
~~~~~
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171019113836.5548-3-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some of the code paths I introduced before returned too early without
running the code to handle a node's branch count. By refactoring
match_chain to only have one exit point, this can be remedied.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1707691.qaJ269GSZW@agathebauer
Link: http://lkml.kernel.org/r/20171018185350.14893-2-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.
However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:
----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()
// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't currently harmful.
However, for some features it is necessary to instrument reads and
writes separately, which is not possible with ACCESS_ONCE(). This
distinction is critical to correct operation.
The bulk of the kernel code can be transformed via Coccinelle to use
{READ,WRITE}_ONCE(), though this only modifies users of ACCESS_ONCE(),
and not the implementation itself. As such, it has the potential to
break homebrew ACCESS_ONCE() macros seen in some user code in the kernel
tree (e.g. the virtio code, as fixed in commit ea9156fb3b).
To avoid fragility if/when that transformation occurs, this patch
reworks the definitions of {READ,WRITE}_ONCE() in the rcutorture formal
tests, and removes the unused ACCESS_ONCE() helper. There should be no
functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-13-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't currently harmful.
However, for some features it is necessary to instrument reads and
writes separately, which is not possible with ACCESS_ONCE(). This
distinction is critical to correct operation.
The bulk of the kernel code can be transformed via Coccinelle to use
{READ,WRITE}_ONCE(), though this only modifies users of ACCESS_ONCE(),
and not the implementation itself. As such, it has the potential to
break homebrew ACCESS_ONCE() macros seen in some user code in the kernel
tree (e.g. the virtio code, as fixed in commit ea9156fb3b).
To avoid fragility if/when that transformation occurs, and to align with
the preferred usage of {READ,WRITE}_ONCE(), this patch updates the DSCR
selftest code to use READ_ONCE() rather than ACCESS_ONCE(). There should
be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-11-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The fake symbols we create for inlined frames will represent different
functions but can use the symbol start address. This leads to issues
when different inline branches all lead to the same function.
Before:
~~~~~
$ perf report -s sym -i perf.inlining.data --inline --stdio -g function
...
--38.86%--_start
__libc_start_main
main
|
--37.57%--std::norm<double> (inlined)
std::_Norm_helper<true>::_S_do_it<double> (inlined)
|
--36.36%--std::abs<double> (inlined)
std::__complex_abs (inlined)
|
--12.24%--std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>::operator() (inlined)
std::__detail::__mod<unsigned long, 2147483647ul, 16807ul, 0ul> (inlined)
std::__detail::_Mod<unsigned long, 2147483647ul, 16807ul, 0ul, true, true>::__calc (inlined)
~~~~~
Note that this backtrace representation is completely bogus.
Complex abs does not call the linear congruential engine! It
is just a side-effect of a longer inlined stack being appended
to a shorter, different inlined stack, both of which originate
in the same function (main).
This patch fixes the issue:
~~~~~
$ perf report -s sym -i perf.inlining.data --inline --stdio -g function
...
--38.86%--_start
__libc_start_main
main
|
|--35.59%--std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined)
| std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined)
| |
| --34.37%--std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator() (inlined)
| std::generate_canonical<double, 53ul, std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined)
| |
| --12.24%--std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>::operator() (inlined)
| std::__detail::__mod<unsigned long, 2147483647ul, 16807ul, 0ul> (inlined)
| std::__detail::_Mod<unsigned long, 2147483647ul, 16807ul, 0ul, true, true>::__calc (inlined)
|
--1.99%--std::norm<double> (inlined)
std::_Norm_helper<true>::_S_do_it<double> (inlined)
std::abs<double> (inlined)
std::__complex_abs (inlined)
~~~~~
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20171009203310.17362-10-milian.wolff@kdab.com
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
[ Fix up conflict with c1fbc0cf81 ("perf callchain: Compare dsos (as well) for CCKEY_FUNCTION"), remove unneeded hunk ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The original patch that introduced inline frame output in the various
browsers used this suffix already. The new centralized approach that
uses fake symbols for inlined frames was missing this approach so far.
Instead of changing the symbol name itself, we only print the suffix
where needed. This allows us to efficiently lookup the symbol for a
given name without first having to append the suffix before the lookup.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20171009203310.17362-8-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a callchain entry has no srcline available, we ended up comparing
the instruction pointer. I consider this to be not too useful. Rather, I
think we should group the entries by function name, which this patch
adds. For people who want to split the data on the IP boundary, using
`-g address` is the correct choice.
Before:
~~~~~
100.00% 38.86% [.] main
|
|--61.14%--main inlining.cpp:14
| std::norm<double> complex:664
| std::_Norm_helper<true>::_S_do_it<double> complex:654
| std::abs<double> complex:597
| std::__complex_abs complex:589
| |
| |--56.03%--hypot
| | |
| | |--8.45%--__hypot_finite
| | |
| | |--7.62%--__hypot_finite
| | |
| | |--2.29%--__hypot_finite
| | |
| | |--2.24%--__hypot_finite
| | |
| | |--2.06%--__hypot_finite
| | |
| | |--1.81%--__hypot_finite
...
~~~~~
After:
~~~~~
100.00% 38.86% [.] main
|
|--61.14%--main inlining.cpp:14
| std::norm<double> complex:664
| std::_Norm_helper<true>::_S_do_it<double> complex:654
| std::abs<double> complex:597
| std::__complex_abs complex:589
| |
| |--60.29%--hypot
| | |
| | --56.03%--__hypot_finite
| |
| --0.85%--cabs
~~~~~
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20171009203310.17362-7-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The inline_node structs are maintained by the new dso->inlines tree.
This in turn keeps ownership of the fake symbols and srcline string
representing an inline frame.
This tree is sorted by address to allow quick lookups. All other entries
of the symbol beside the function name are unused for inline frames. The
advantage of this approach is that all existing users of the callchain
API can now transparently display inlined frames without having to patch
their code.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20171009203310.17362-6-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation for the creation of real callchain entries for
inlined frames. The rest of the perf code uses the srcline string. As
such, using that also for the srcline API allows us to simplify some of
the upcoming code. Most notably, it will allow us to cache the srcline
for a given inline node and reuse it for different callchain entries.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20171009203310.17362-5-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a requirement to create real callchain entries for inlined
frames.
Since the list of inlines usually contains the target symbol too, i.e.
the location where the frames get inlined to, we alias that symbol and
reuse it as-is is. This ensures that other dependent functionality keeps
working, most notably annotation of the target frames.
For all other entries in the inline_list, a fake symbol is created.
These are marked by new 'inlined' member which is set to true. Only
those symbols are managed by the inline_list and get freed when the
inline_list is deleted from within inline_node__delete.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20171009203310.17362-4-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is mostly a preparation to enable the creation of full callchain
nodes for inline frames. Such frames will reference the IP of the
non-inlined frame, but hold the symbol and srcline for an inlined
location. As such, we won't be able to query the srcline on-demand based
on the IP alone. Instead, we will leverage the functionality provided by
this patch here, and store the srcline for the inlined nodes in the new
srcline member of callchain_cursor_node.
Note that this patch on its own leaks the srcline, as there is no
free_callchain_cursor_node or similar. A future patch will add caching
of the srcline and handle deletion properly.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20171009203310.17362-3-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The follow-up commits will make inline frames first-class citizens in
the callchain, thereby obsoleting all of this special code.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20171009203310.17362-2-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update the documentation to provide help about JSON output generation,
and add an example in bpftool-prog manual page.
Also reintroduce an example that was left aside when the tool was moved
from GitHub to the kernel sources, in order to show how to mount the
bpffs file system (to pin programs) inside the bpftool-prog manual page.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the look-and-feel of the manual pages somewhat closer to other
manual pages, such as the ones from the utilities from iproute2, by
highlighting more keywords.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
As all commands can now return JSON output (possibly just a "null"
value), output of `bpftool --json batch file FILE` should also be fully
JSON compliant.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Turn err() and info() macros into functions.
In order to avoid naming conflicts with variables in the code, rename
them as p_err() and p_info() respectively.
The behavior of these functions is similar to the one of the macros for
plain output. However, when JSON output is requested, these macros
return a JSON-formatted "error" object instead of printing a message to
stderr.
To handle error messages correctly with JSON, a modification was brought
to their behavior nonetheless: the functions now append a end-of-line
character at the end of the message. This way, we can remove end-of-line
characters at the end of the argument strings, and not have them in the
JSON output.
All error messages are formatted to hold in a single call to p_err(), in
order to produce a single JSON field.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
`bpftool batch file FILE` takes FILE as an argument and executes all the
bpftool commands it finds inside (or stops if an error occurs).
To obtain a consistent JSON output, create a root JSON array, then for
each command create a new object containing two fields: one with the
command arguments, the other with the output (which is the JSON object
that the command would have produced, if called on its own).
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reuse the json_writer API introduced in an earlier commit to make
bpftool able to generate JSON output on
`bpftool map { show | dump | lookup | getnext }` commands. Remaining
commands produce no output.
Some functions have been spit into plain-output and JSON versions in
order to remain readable.
Outputs for sample maps have been successfully tested against a JSON
validator.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reuse the json_writer API introduced in an earlier commit to make
bpftool able to generate JSON output on `bpftool prog show *` commands.
A new printing function is created to be passed as an argument to the
disassembler.
Similarly to plain output, opcodes are printed on request.
Outputs from sample programs have been successfully tested against a
JSON validator.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reuse the json_writer API introduced in an earlier commit to make
bpftool able to generate JSON output on `bpftool prog show *` commands.
For readability, the code from show_prog() has been split into two
functions, one for plain output, one for JSON.
Outputs from sample programs have been successfully tested against a
JSON validator.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
These two options can be used to ask for a JSON output (--j or -json),
and to make this JSON human-readable (-p or --pretty).
A json_writer object is created when JSON is required, and will be used
in follow-up commits to produce JSON output.
Note that --pretty implies --json.
Update for the manual pages and interactive help messages comes in a
later patch of the series.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an option parsing facility to bpftool, in prevision of future
options for demanding JSON output. Currently, two options are added:
--help and --version, that act the same as the respective commands
`help` and `version`.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In prevision of following commits, supposed to add JSON output to the
tool, two files are copied from the iproute2 repository (taken at commit
268a9eee985f): lib/json_writer.c and include/json_writer.h.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't need perf.h, that is a kitchen sink, all we need is
perf_events.h for perf_ns_link_info, sys/types.h for pid_t and
linux/types.h for u64, list_head.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-f2uxyaj4s2hmntkrezpa6dqz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the string passed in '--time' is invalid, we must do some cleanup
before leaving. As in the other error handling paths of this function.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Fixes: 2a865bd8dd ("perf kmem: Add option to specify time window of interest")
Link: http://lkml.kernel.org/r/20170916060936.28199-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the string passed in '--time' is invalid, or if failed to set
libtraceevent function resolver, we must do some cleanup before leaving.
As in the other error handling paths of this function.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/20170916062537.28921-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We've been mixing print() with fprintf() style printing for a while, but
now we need to use fprintf() like syntax uniformly as a preparatory
patch for supporting printing to different files, one per event.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Link: http://lkml.kernel.org/n/tip-kv5z3v8ptfghbarv3a9usvin@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of print_binary() but receiving a fp pointer and expecting that the
printer be a fprintf like function, i.e. receive a FILE pointer and
return the number of characters printed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Link: http://lkml.kernel.org/n/tip-6oqnxr6lmgqe6q6p3iugnscx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some of the metrics use an incorrect syntax for specifying the cmask for
an event. Convert to perf syntax so that they can be resolved.
Fixes metrics on Broadwell, SandyBridge.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-3k3fkfj8obek9dkmryyrqzhu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we use one of:
[acme@jouet linux]$ make help | grep perf
perf-tar-src-pkg - Build perf-4.14.0-rc3.tar source tarball
perf-targz-src-pkg - Build perf-4.14.0-rc3.tar.gz source tarball
perf-tarbz2-src-pkg - Build perf-4.14.0-rc3.tar.bz2 source tarball
perf-tarxz-src-pkg - Build perf-4.14.0-rc3.tar.xz source tarball
[acme@jouet linux]$
I.e. when we create a detached tarball to build perf outside outside the
enveloping kernel sources (from a kernel tarball or a checked out
linux.git directory) we by definition can't check for differences among
the tools/{include,arch}, etc files we originally copied from the
kernel, so bail out in that case, to avoid warnings when doing the
detached builds.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vbrga0mhplv7niwxr3ghjyxv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need for extra cpuid_parse arch callback, it can be handled
directly in init callback.
Adding the init function to x86 to cover the cpuid initialization.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171011150158.11895-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix an incorrect description in the 'perf list' manpage. When a group
does not fit into the hardware it is partially scheduled, but does not
error out.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20171010224322.15861-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Otherwise we fail on virtual machines with no support for specific HW
events.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171009130712.14747-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The previous prep patch was just to show exactly what changed in that
function, now its time to move that method and things only it uses to
the right place, mmap.[ch]
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-aaxywfgw3d44x6xlu8zm1avu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It becomes a perf_mmap method, "push", that build reads from a mmap and
"pushes" it to a consumer, that in the initial case, for 'perf record',
just writes it to the perf.data file descriptor, but may be used by
'top', etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-u4l1qjbi6l76r2k0nv99220n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To better organize the sources, and we may end up even using it
directly, without evlists and evsels.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-oiqrm7grflurnnzo2ovfnslg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
fix multiple build errors and warnings
1.
test_maps.c: In function ‘test_map_rdonly’:
test_maps.c:1051:30: error: ‘BPF_F_RDONLY’ undeclared (first use in this function)
MAP_SIZE, map_flags | BPF_F_RDONLY);
2.
test_maps.c:1048:6: warning: unused variable ‘i’ [-Wunused-variable]
int i, fd, key = 0, value = 0;
3.
test_maps.c:1087:2: error: called object is not a function or function pointer
assert(bpf_map_lookup_elem(fd, &key, &value) == -1 && errno == EPERM);
4.
./bpf_helpers.h:72:11: error: use of undeclared identifier 'BPF_FUNC_getsockopt'
(void *) BPF_FUNC_getsockopt;
Fixes: e043325b30 ("bpf: Add tests for eBPF file mode")
Fixes: 6e71b04a82 ("bpf: Add file mode configuration into bpf maps")
Fixes: cd86d1fd21 ("bpf: Adding helper function bpf_getsockops")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
There were quite a few overlapping sets of changes here.
Daniel's bug fix for off-by-ones in the new BPF branch instructions,
along with the added allowances for "data_end > ptr + x" forms
collided with the metadata additions.
Along with those three changes came veritifer test cases, which in
their final form I tried to group together properly. If I had just
trimmed GIT's conflict tags as-is, this would have split up the
meta tests unnecessarily.
In the socketmap code, a set of preemption disabling changes
overlapped with the rename of bpf_compute_data_end() to
bpf_compute_data_pointers().
Changes were made to the mv88e6060.c driver set addr method
which got removed in net-next.
The hyperv transport socket layer had a locking change in 'net'
which overlapped with a change of socket state macro usage
in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf fixes from Thomas Gleixner:
"A series of fixes for perf tooling:
- Make xyarray return the X/Y size correctly which fixes a crash in
the exit code.
- Fix the libc path in test so it works not only on Debian/Ubuntu
correctly
- Check for eBPF file existance and output a useful error message
instead of failing to compile a non existant file
- Make sure perf_hpp_fmt is not longer references before freeing it
- Use list_del_init() in the histogram code to prevent a crash when
the already deleted element is deleted again
- Remove the leftovers of the removed '-l' option
- Add reviewer entries to the MAINTAINERS file"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf test shell trace+probe_libc_inet_pton.sh: Be compatible with Debian/Ubuntu
perf xyarray: Fix wrong processing when closing evsel fd
perf buildid-list: Fix crash when processing PERF_RECORD_NAMESPACE
perf record: Fix documentation for a inexistent option '-l'
perf tools: Add long time reviewers to MAINTAINERS
perf tools: Check wether the eBPF file exists in event parsing
perf hists: Add extra integrity checks to fmt_free()
perf hists: Fix crash in perf_hpp__reset_output_field()
Pull objtool fix from Thomas Gleixner:
"Plug a memory leak in the instruction decoder"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix memory leak in decode_instructions()
Pull networking fixes from David Miller:
"A little more than usual this time around. Been travelling, so that is
part of it.
Anyways, here are the highlights:
1) Deal with memcontrol races wrt. listener dismantle, from Eric
Dumazet.
2) Handle page allocation failures properly in nfp driver, from Jaku
Kicinski.
3) Fix memory leaks in macsec, from Sabrina Dubroca.
4) Fix crashes in pppol2tp_session_ioctl(), from Guillaume Nault.
5) Several fixes in bnxt_en driver, including preventing potential
NVRAM parameter corruption from Michael Chan.
6) Fix for KRACK attacks in wireless, from Johannes Berg.
7) rtnetlink event generation fixes from Xin Long.
8) Deadlock in mlxsw driver, from Ido Schimmel.
9) Disallow arithmetic operations on context pointers in bpf, from
Jakub Kicinski.
10) Missing sock_owned_by_user() check in sctp_icmp_redirect(), from
Xin Long.
11) Only TCP is supported for sockmap, make that explicit with a
check, from John Fastabend.
12) Fix IP options state races in DCCP and TCP, from Eric Dumazet.
13) Fix panic in packet_getsockopt(), also from Eric Dumazet.
14) Add missing locked in hv_sock layer, from Dexuan Cui.
15) Various aquantia bug fixes, including several statistics handling
cures. From Igor Russkikh et al.
16) Fix arithmetic overflow in devmap code, from John Fastabend.
17) Fix busted socket memory accounting when we get a fault in the tcp
zero copy paths. From Willem de Bruijn.
18) Don't leave opt->tot_len uninitialized in ipv6, from Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits)
stmmac: Don't access tx_q->dirty_tx before netif_tx_lock
ipv6: flowlabel: do not leave opt->tot_len with garbage
of_mdio: Fix broken PHY IRQ in case of probe deferral
textsearch: fix typos in library helpers
rxrpc: Don't release call mutex on error pointer
net: stmmac: Prevent infinite loop in get_rx_timestamp_status()
net: stmmac: Fix stmmac_get_rx_hwtstamp()
net: stmmac: Add missing call to dev_kfree_skb()
mlxsw: spectrum_router: Configure TIGCR on init
mlxsw: reg: Add Tunneling IPinIP General Configuration Register
net: ethtool: remove error check for legacy setting transceiver type
soreuseport: fix initialization race
net: bridge: fix returning of vlan range op errors
sock: correct sk_wmem_queued accounting on efault in tcp zerocopy
bpf: add test cases to bpf selftests to cover all access tests
bpf: fix pattern matches for direct packet access
bpf: fix off by one for range markings with L{T, E} patterns
bpf: devmap fix arithmetic overflow in bitmap_size calculation
net: aquantia: Bad udp rate on default interrupt coalescing
net: aquantia: Enable coalescing management via ethtool interface
...
Adding support for helper function bpf_getsockops to socket_ops BPF
programs. This patch only supports TCP_CONGESTION.
Signed-off-by: Vlad Vysotsky <vlad@cs.ucla.edu>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This command can be used to print the version of the tool, which is in
fact the version from Linux taken from usr/include/linux/version.h.
Example usage:
$ bpftool version
bpftool v4.14.0
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the `bpftool prog dump { jited | xlated } ...` command, adding
`opcodes` keyword (to request opcodes to be printed) will have no effect
if `file FILE` (to write binary output to FILE) is provided.
The manual page and the help message to be displayed in the terminal
should reflect that, and indicate that these options should be mutually
exclusive.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The eBPF instruction permitting to load double words (8 bytes) into a
register need 8-byte long "immediate" field, and thus occupy twice the
space of other instructions. bpftool was aware of this and would
increment the instruction counter only once on meeting such instruction,
but it would only print the first four bytes of the immediate value to
load. Make it able to dump the whole 16 byte-long double instruction
instead (as would `llvm-objdump -d <program>`).
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make error messages more consistent. Specifically, when bpftool fails at
parsing map key bytes, make it print a single error message to stderr
and return from the function, instead of (always) printing a second
error message afterwards.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make error messages and return codes more consistent. Specifically, make
`bpftool prog help` a real command, instead of printing usage by default
for a non-recognized "help" command. Output is the same, but this makes
bpftool return with a success value instead of an error.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make error messages and return codes more consistent. Specifically,
replace the use of info() macro with err() when too many eBPF
instructions are received to be dumped, given that bpftool returns with
a non-null exit value in that case.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the program to have a more consistent return code. Specifically,
do not make bpftool return an error code simply because it reaches the
end of the list of the eBPF programs to show.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make print_hex() able to print to any file instead of standard output
only, and rename it to fprint_hex(). The function can now be called with
the info() macro, for example, without splitting the output between
standard and error outputs.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lets add test cases to cover really all possible direct packet
access tests for good/bad access cases so we keep tracking them.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two related tests are added into bpf selftest to test read only map and
write only map. The tests verified the read only and write only flags
are working on hash maps.
Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The skb->mark field is a union with reserved_tailroom which is used
in the TCP code paths from stream memory allocation. Allowing SK_SKB
programs to set this field creates a conflict with future code
optimizations, such as "gifting" the skb to the egress path instead
of creating a new skb and doing a memcpy.
Because we do not have a released version of SK_SKB yet lets just
remove it for now. A more appropriate scratch pad to use at the
socket layer is dev_scratch, but lets add that in future kernels
when needed.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
SK_SKB BPF programs are run from the socket/tcp context but early in
the stack before much of the TCP metadata is needed in tcp_skb_cb. So
we can use some unused fields to place BPF metadata needed for SK_SKB
programs when implementing the redirect function.
This allows us to drop the preempt disable logic. It does however
require an API change so sk_redirect_map() has been updated to
additionally provide ctx_ptr to skb. Note, we do however continue to
disable/enable preemption around actual BPF program running to account
for map updates.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only TCP sockets have been tested and at the moment the state change
callback only handles TCP sockets. This adds a check to ensure that
sockets actually being added are TCP sockets.
For net-next we can consider UDP support.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an error occurs before adding an allocated insn to the list, free
it before returning.
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/336da800bf6070eae11f4e0a3b9ca64c27658114.1508430423.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit f1174f77b5 ("bpf/verifier: rework value tracking")
removed the crafty selection of which pointer types are
allowed to be modified. This is OK for most pointer types
since adjust_ptr_min_max_vals() will catch operations on
immutable pointers. One exception is PTR_TO_CTX which is
now allowed to be offseted freely.
The intent of aforementioned commit was to allow context
access via modified registers. The offset passed to
->is_valid_access() verifier callback has been adjusted
by the value of the variable offset.
What is missing, however, is taking the variable offset
into account when the context register is used. Or in terms
of the code adding the offset to the value passed to the
->convert_ctx_access() callback. This leads to the following
eBPF user code:
r1 += 68
r0 = *(u32 *)(r1 + 8)
exit
being translated to this in kernel space:
0: (07) r1 += 68
1: (61) r0 = *(u32 *)(r1 +180)
2: (95) exit
Offset 8 is corresponding to 180 in the kernel, but offset
76 is valid too. Verifier will "accept" access to offset
68+8=76 but then "convert" access to offset 8 as 180.
Effective access to offset 248 is beyond the kernel context.
(This is a __sk_buff example on a debug-heavy kernel -
packet mark is 8 -> 180, 76 would be data.)
Dereferencing the modified context pointer is not as easy
as dereferencing other types, because we have to translate
the access to reading a field in kernel structures which is
usually at a different offset and often of a different size.
To allow modifying the pointer we would have to make sure
that given eBPF instruction will always access the same
field or the fields accessed are "compatible" in terms of
offset and size...
Disallow dereferencing modified context pointers and add
to selftests the test case described here.
Fixes: f1174f77b5 ("bpf/verifier: rework value tracking")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Program tag is usually displayed as string of bytes without
any separators (e.g. as "aa5520b1090cfeb6" vs MAC addr-like
format bpftool uses currently: "aa:55:20:b1:09:0c:fe:b6").
Make bptfool use the more common format both for displaying
the tag and selecting the program by tag.
This was pointed out in review but I misunderstood the comment.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In debian/ubuntu, libc.so is located at a different place,
/lib/x86_64-linux-gnu/libc-2.23.so, so it outputs like this when testing:
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.040 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.040/0.040/0.040/0.000 ms
0.000 probe_libc:inet_pton:(7f0e2db741c0))
__GI___inet_pton (/lib/x86_64-linux-gnu/libc-2.23.so)
getaddrinfo (/lib/x86_64-linux-gnu/libc-2.23.so)
[0xffffa9d40f34ff4d] (/bin/ping)
Fix up the libc path to make sure this test works in more OSes.
Committer testing:
When this test fails one can use 'perf test -v', i.e. in verbose mode, where
it'll show the expected backtrace, so, after applying this test:
On Fedora 26:
# perf test -v ping
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 23322
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.058 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.058/0.058/0.058/0.000 ms
0.000 probe_libc:inet_pton:(7fe344310d80))
__GI___inet_pton (/usr/lib64/libc-2.25.so)
getaddrinfo (/usr/lib64/libc-2.25.so)
_init (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
#
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philip Li <philip.li@intel.com>
Link: http://lkml.kernel.org/r/1508315649-18836-1-git-send-email-lizhijian@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In current xyarray code, xyarray__max_x() returns max_y, and xyarray__max_y()
returns max_x.
It's confusing and for code logic it looks not correct.
Error happens when closing evsel fd. Let's see this scenario:
1. Allocate an fd (pseudo-code)
perf_evsel__alloc_fd(struct perf_evsel *evsel, int ncpus, int nthreads)
{
evsel->fd = xyarray__new(ncpus, nthreads, sizeof(int));
}
xyarray__new(int xlen, int ylen, size_t entry_size)
{
size_t row_size = ylen * entry_size;
struct xyarray *xy = zalloc(sizeof(*xy) + xlen * row_size);
xy->entry_size = entry_size;
xy->row_size = row_size;
xy->entries = xlen * ylen;
xy->max_x = xlen;
xy->max_y = ylen;
......
}
So max_x is ncpus, max_y is nthreads and row_size = nthreads * 4.
2. Use perf syscall and get the fd
int perf_evsel__open(struct perf_evsel *evsel, struct cpu_map *cpus,
struct thread_map *threads)
{
for (cpu = 0; cpu < cpus->nr; cpu++) {
for (thread = 0; thread < nthreads; thread++) {
int fd, group_fd;
fd = sys_perf_event_open(&evsel->attr, pid, cpus->map[cpu],
group_fd, flags);
FD(evsel, cpu, thread) = fd;
}
}
static inline void *xyarray__entry(struct xyarray *xy, int x, int y)
{
return &xy->contents[x * xy->row_size + y * xy->entry_size];
}
These codes don't have issues. The issue happens in the closing of fd.
3. Close fd.
void perf_evsel__close_fd(struct perf_evsel *evsel)
{
int cpu, thread;
for (cpu = 0; cpu < xyarray__max_x(evsel->fd); cpu++)
for (thread = 0; thread < xyarray__max_y(evsel->fd); ++thread) {
close(FD(evsel, cpu, thread));
FD(evsel, cpu, thread) = -1;
}
}
Since xyarray__max_x() returns max_y (nthreads) and xyarry__max_y()
returns max_x (ncpus), so above code is actually to be:
for (cpu = 0; cpu < nthreads; cpu++)
for (thread = 0; thread < ncpus; ++thread) {
close(FD(evsel, cpu, thread));
FD(evsel, cpu, thread) = -1;
}
It's not correct!
This change is introduced by "475fb533fb7d" ("perf evsel: Fix buffer overflow
while freeing events")
This fix is to let xyarray__max_x() return max_x (ncpus) and
let xyarry__max_y() return max_y (nthreads)
Committer note:
This was also fixed by Ravi Bangoria, who provided the same patch,
noticing the problem with 'perf record':
<quote Ravi>
I see 'perf record -p <pid>' crashes with following log:
*** Error in `./perf': free(): invalid next size (normal): 0x000000000298b340 ***
======= Backtrace: =========
/lib/x86_64-linux-gnu/libc.so.6(+0x777e5)[0x7f7fd85c87e5]
/lib/x86_64-linux-gnu/libc.so.6(+0x8037a)[0x7f7fd85d137a]
/lib/x86_64-linux-gnu/libc.so.6(cfree+0x4c)[0x7f7fd85d553c]
./perf(perf_evsel__close+0xb4)[0x4b7614]
./perf(perf_evlist__delete+0x100)[0x4ab180]
./perf(cmd_record+0x1d9)[0x43a5a9]
./perf[0x49aa2f]
./perf(main+0x631)[0x427841]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)[0x7f7fd8571830]
./perf(_start+0x29)[0x427a59]
</>
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Fixes: d74be47673 ("perf xyarray: Save max_x, max_y")
Link: http://lkml.kernel.org/r/1508339478-26674-1-git-send-email-yao.jin@linux.intel.com
Link: http://lkml.kernel.org/r/1508327446-15302-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'cpumap' is primarily used as a backend map for XDP BPF helper
call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'.
This patch implement the main part of the map. It is not connected to
the XDP redirect system yet, and no SKB allocation are done yet.
The main concern in this patch is to ensure the datapath can run
without any locking. This adds complexity to the setup and tear-down
procedure, which assumptions are extra carefully documented in the
code comments.
V2:
- make sure array isn't larger than NR_CPUS
- make sure CPUs added is a valid possible CPU
V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl>
V5:
- Restrict map allocation to root / CAP_SYS_ADMIN
- WARN_ON_ONCE if queue is not empty on tear-down
- Return -EPERM on memlock limit instead of -ENOMEM
- Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup()
- Moved cpu_map_enqueue() to next patch
V6: all notice by Daniel Borkmann
- Fix err return code in cpu_map_alloc() introduced in V5
- Move cpu_possible() check after max_entries boundary check
- Forbid usage initially in check_map_func_compatibility()
V7:
- Fix alloc error path spotted by Daniel Borkmann
- Did stress test adding+removing CPUs from the map concurrently
- Fixed refcnt issue on cpu_map_entry, kthread started too soon
- Make sure packets are flushed during tear-down, involved use of
rcu_barrier() and kthread_run only exit after queue is empty
- Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring
V8:
- Nitpicking comments and gramma by Edward Cree
- Fix missing semi-colon introduced in V7 due to rebasing
- Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
To ease cross-compiling, make use of the $(PKG_CONFIG) variable rather
than hard-coding calls to pkg-config.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
It can be helpful, especially when using a build system, to set the C
compiler externally.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Most, but not all, toolchains support the "-fstack-protector" flag. We
check if the compiler supports the flag before using it. This allows
tmon to be compiled for more environments.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
This reverts commit c91fc8519d.
That change caused a C6 and PC6 residency regression on large idle systems.
Users also complained about new output indicating jitter:
turbostat: cpu6 jitter 3794 9142
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: 4.13+ <stable@vger.kernel.org> # v4.13+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Thomas reported that 'perf buildid-list' gets a SEGFAULT due to NULL
pointer deref when he ran it on a data with namespace events. It was
because the buildid_id__mark_dso_hit_ops lacks the namespace event
handler and perf_too__fill_default() didn't set it.
Program received signal SIGSEGV, Segmentation fault.
0x0000000000000000 in ?? ()
Missing separate debuginfos, use: dnf debuginfo-install audit-libs-2.7.7-1.fc25.s390x bzip2-libs-1.0.6-21.fc25.s390x elfutils-libelf-0.169-1.fc25.s390x
+elfutils-libs-0.169-1.fc25.s390x libcap-ng-0.7.8-1.fc25.s390x numactl-libs-2.0.11-2.ibm.fc25.s390x openssl-libs-1.1.0e-1.1.ibm.fc25.s390x perl-libs-5.24.1-386.fc25.s390x
+python-libs-2.7.13-2.fc25.s390x slang-2.3.0-7.fc25.s390x xz-libs-5.2.3-2.fc25.s390x zlib-1.2.8-10.fc25.s390x
(gdb) where
#0 0x0000000000000000 in ?? ()
#1 0x00000000010fad6a in machines__deliver_event (machines=<optimized out>, machines@entry=0x2c6fd18,
evlist=<optimized out>, event=event@entry=0x3fffdf00470, sample=0x3ffffffe880, sample@entry=0x3ffffffe888,
tool=tool@entry=0x1312968 <build_id.mark_dso_hit_ops>, file_offset=1136) at util/session.c:1287
#2 0x00000000010fbf4e in perf_session__deliver_event (file_offset=1136, tool=0x1312968 <build_id.mark_dso_hit_ops>,
sample=0x3ffffffe888, event=0x3fffdf00470, session=0x2c6fc30) at util/session.c:1340
#3 perf_session__process_event (session=0x2c6fc30, session@entry=0x0, event=event@entry=0x3fffdf00470,
file_offset=file_offset@entry=1136) at util/session.c:1522
#4 0x00000000010fddde in __perf_session__process_events (file_size=11880, data_size=<optimized out>,
data_offset=<optimized out>, session=0x0) at util/session.c:1899
#5 perf_session__process_events (session=0x0, session@entry=0x2c6fc30) at util/session.c:1953
#6 0x000000000103b2ac in perf_session__list_build_ids (with_hits=<optimized out>, force=<optimized out>)
at builtin-buildid-list.c:83
#7 cmd_buildid_list (argc=<optimized out>, argv=<optimized out>) at builtin-buildid-list.c:115
#8 0x00000000010a026c in run_builtin (p=0x1311f78 <commands+24>, argc=argc@entry=2, argv=argv@entry=0x3fffffff3c0)
at perf.c:296
#9 0x000000000102bc00 in handle_internal_command (argv=<optimized out>, argc=2) at perf.c:348
#10 run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:392
#11 main (argc=<optimized out>, argv=0x3fffffff3c0) at perf.c:536
(gdb)
Fix it by adding a stub event handler for namespace event.
Committer testing:
Further clarifying, plain using 'perf buildid-list' will not end up in a
SEGFAULT when processing a perf.data file with namespace info:
# perf record -a --namespaces sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.024 MB perf.data (1058 samples) ]
# perf buildid-list | wc -l
38
# perf buildid-list | head -5
e2a171c7b905826fc8494f0711ba76ab6abbd604 /lib/modules/4.14.0-rc3+/build/vmlinux
874840a02d8f8a31cedd605d0b8653145472ced3 /lib/modules/4.14.0-rc3+/kernel/arch/x86/kvm/kvm-intel.ko
ea7223776730cd8a22f320040aae4d54312984bc /lib/modules/4.14.0-rc3+/kernel/drivers/gpu/drm/i915/i915.ko
5961535e6732a8edb7f22b3f148bb2fa2e0be4b9 /lib/modules/4.14.0-rc3+/kernel/drivers/gpu/drm/drm.ko
f045f54aa78cf1931cc893f78b6cbc52c72a8cb1 /usr/lib64/libc-2.25.so
#
It is only when one asks for checking what of those entries actually had
samples, i.e. when we use either -H or --with-hits, that we will process
all the PERF_RECORD_ events, and since tools/perf/builtin-buildid-list.c
neither explicitely set a perf_tool.namespaces() callback nor the
default stub was set that we end up, when processing a
PERF_RECORD_NAMESPACE record, causing a SEGFAULT:
# perf buildid-list -H
Segmentation fault (core dumped)
^C
#
Reported-and-Tested-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Fixes: f3b3614a28 ("perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info")
Link: http://lkml.kernel.org/r/20171017132900.11043-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf record' had a '-l' option that meant "scale counter values" a very
long time ago, but it currently belongs to 'perf stat' as '-c'. So
remove it. I found this problem in the below case.
$ perf record -e cycles -l sleep 3
Error: unknown switch `l
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1507907412-19813-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes a bug in the tdc script, where executing tdc
with the -l argument would cause the tests to start running
as opposed to listing all the known test cases.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add basic unit tests for police and skbmod actions in tc.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The original submission had the test cases stored in one
monolithic file. This can be unwieldy to edit, especially as more
test cases are added. This patch removes the original tests.json
file in favour of individual ones broken down by category.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tests for flushing gact and mirred were missing. This patch
adds test cases to explicitly test the flush of any installed
gact/mirred actions.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf fixes from Ingo Molnar:
"Some tooling fixes plus three kernel fixes: a memory leak fix, a
statistics fix and a crash fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Fix memory leaks on allocation failures
perf/core: Fix cgroup time when scheduling descendants
perf/core: Avoid freeing static PMU contexts when PMU is unregistered
tools include uapi bpf.h: Sync kernel ABI header with tooling header
perf pmu: Unbreak perf record for arm/arm64 with events with explicit PMU
perf script: Add missing separator for "-F ip,brstack" (and brstackoff)
perf callchain: Compare dsos (as well) for CCKEY_FUNCTION
I was stress testing some backports and with high load, after some time,
the latest version of the selftest showed some false positive in
connection with the uffdio_copy_retry. This seems to fix it while still
exercising -EEXIST in the background transfer once in a while.
The fork child will quit after the last UFFDIO_COPY is run, so a
repeated UFFDIO_COPY may not return -EEXIST. This change restricts the
-EEXIST stress to the background transfer where the memory can't go away
from under it.
Also updated uffdio_zeropage, so the interface is consistent.
Link: http://lkml.kernel.org/r/20171004171541.1495-2-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adding the check wether the eBPF file exists, to consider it
as eBPF input file. This way we can differentiate eBPF events
from events that end up with same suffix as eBPF file.
Before:
$ perf stat -e 'cpu/uops_executed.core/' true
bpf: builtin compilation failed: -95, try external compiler
WARNING: unable to get correct kernel building directory.
Hint: Set correct kbuild directory using 'kbuild-dir' option in [llvm]
section of ~/.perfconfig or set it to "" to suppress kbuild
detection.
event syntax error: 'cpu/uops_executed.core/'
\___ Failed to load cpu/uops_executed.c from source: 'version' section incorrect or lost
After:
$ perf stat -e 'cpu/uops_executed.core/' true
Performance counter stats for 'true':
181,533 cpu/uops_executed.core/:u
0.002795447 seconds time elapsed
If user makes type in the eBPF file, we prioritize the event syntax
and show following warning:
$ perf stat -e 'krava.c//' true
event syntax error: 'krava.c//'
\___ Cannot find PMU `krava.c'. Missing kernel support?
Reported-and-Tested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20171013083736.15037-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make sure the struct perf_hpp_fmt is properly unhooked before we free
it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20171013083736.15037-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Du Changbin reported crash [1] when calling perf_hpp__reset_output_field()
after unregistering field via perf_hpp__column_unregister().
This ends up in calling following list_del* sequence on
the same format:
perf_hpp__column_unregister:
list_del(&format->list);
perf_hpp__reset_output_field:
list_del_init(&fmt->list);
where the later list_del_init might touch already freed formats.
Fixing this by replacing list_del() with list_del_init() in
perf_hpp__column_unregister().
[1] http://marc.info/?l=linux-kernel&m=149059595826019&w=2
Reported-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20171013083736.15037-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Turns out pthreads returns an errno and doesn't set errno. This doesn't
play well with perror().
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Make kvm_stat support Python 3 by changing the use of "print" to a
function rather than a statement, switching from "iteritems" and
"iterkeys" (removed in Python 3) to "items" and "keys" respectively,
and decoding bytes to strings when dealing with text.
With this change, kvm_stat is usable with Python 2.6 and greater.
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
- lib/scatterlist updates, use for userptr allocations (Tvrtko)
- Fixed point wrapper cleanup (Mahesh)
- Gen9+ transition watermarks, watermark optimization and fixes (Mahesh)
- Display IPC (Isochronous Priority Control) support (Mahesh)
- GEM workaround fixes (Oscar)
- GVT: PCI config sanitize series (Changbin)
- GVT: Workload submission error handling series (Fred)
- PSR fixes and refactoring (Rodrigo)
- HWSP based optimizations (Chris)
- Private PAT management (Zhi)
- IRQ handling fixes and refactoring (Ville)
- Module parameter refactoring and variable name clash fix (Michal)
- Execlist refactoring, incomplete request unwinding on reset (Chris)
- GuC scheduling improvements (Michal)
- OA updates (Lionel)
- Coffeelake out of alpha support (Rodrigo)
- seqno fixes (Chris)
- Execlist refactoring (Mika)
- DP and DP MST cleanups (Dhinakaran)
- Cannonlake slice/sublice config (Ben)
- Numerous fixes all around (Everyone)
-----BEGIN PGP SIGNATURE-----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=qpkh
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2017-09-29' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
2nd batch of v4.15 features:
- lib/scatterlist updates, use for userptr allocations (Tvrtko)
- Fixed point wrapper cleanup (Mahesh)
- Gen9+ transition watermarks, watermark optimization and fixes (Mahesh)
- Display IPC (Isochronous Priority Control) support (Mahesh)
- GEM workaround fixes (Oscar)
- GVT: PCI config sanitize series (Changbin)
- GVT: Workload submission error handling series (Fred)
- PSR fixes and refactoring (Rodrigo)
- HWSP based optimizations (Chris)
- Private PAT management (Zhi)
- IRQ handling fixes and refactoring (Ville)
- Module parameter refactoring and variable name clash fix (Michal)
- Execlist refactoring, incomplete request unwinding on reset (Chris)
- GuC scheduling improvements (Michal)
- OA updates (Lionel)
- Coffeelake out of alpha support (Rodrigo)
- seqno fixes (Chris)
- Execlist refactoring (Mika)
- DP and DP MST cleanups (Dhinakaran)
- Cannonlake slice/sublice config (Ben)
- Numerous fixes all around (Everyone)
* tag 'drm-intel-next-2017-09-29' of git://anongit.freedesktop.org/drm/drm-intel: (168 commits)
drm/i915: Update DRIVER_DATE to 20170929
drm/i915: Use memset64() to prefill the GTT page
drm/i915: Also discard second CRC on gen8+ platforms.
drm/i915/psr: Set frames before SU entry for psr2
drm/dp: Add defines for latency in sink
drm/i915: Allow optimized platform checks
drm/i915: Avoid using dev_priv->info.gen directly.
i915: Use %pS printk format for direct addresses
drm/i915/execlists: Notify context-out for lost requests
drm/i915/cnl: Add support slice/subslice/eu configs
drm/i915: Compact device info access by a small re-ordering
drm/i915: Add IS_PLATFORM macro
drm/i915/selftests: Try to recover from a wedged GPU during reset tests
drm/i915/huc: Reorganize HuC authentication
drm/i915: Fix default values of some modparams
drm/i915: Extend I915_PARAMS_FOR_EACH with default member value
drm/i915: Make I915_PARAMS_FOR_EACH macro more flexible
drm/i915: Enable scanline read based on frame timestamps
drm/i915/execlists: Microoptimise execlists_cancel_port_request()
drm/i915: Don't rmw PIPESTAT enable bits
...
exercise RTM_GETNETCONF call path for unspec, inet and inet6
families, they are DOIT_UNLOCKED candidates.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Compile the instruction printer from kernel/bpf and use it
for disassembling "translated" eBPF code.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test for verifier log handling. Check bad attr combinations
but focus on cases when log is truncated.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This update consists of:
- fix for x86: sysret_ss_attrs test build failure preventing the x86
tests from running.
- fix mqueue: fix regression in silencing test run output.
-----BEGIN PGP SIGNATURE-----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=V+1w
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.14-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
- fix for x86: sysret_ss_attrs test build failure preventing the x86
tests from running
- fix mqueue: fix regression in silencing test run output
* tag 'linux-kselftest-4.14-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: mqueue: fix regression in silencing output from RUN_TESTS
selftests: x86: sysret_ss_attrs doesn't build on a PIE build
Both rcutorture and locktorture currently place temporary files in /tmp,
in keeping with decades-long tradition. However, sometimes it is useful
to specify an alternative temporary directory, for example, for space
or performance reasons. This commit therefore causes the torture-test
scripting to use the path specified in the TMPDIR environment variable,
or to fall back to traditional /tmp if this variable is not set.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Silences the checker:
Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h'
The 90caccdd8c ("bpf: fix bpf_tail_call() x64 JIT") cset only updated
a comment in uapi/bpf.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-rwx2cqbf0x1lwa1krsr6e6hd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, perf record is broken on arm/arm64 systems when the PMU is
specified explicitly as part of the event, e.g.
$ ./perf record -e armv8_cortex_a53/cpu_cycles/u true
In such cases, perf record fails to open events unless
perf_event_paranoid is set to -1, even if the PMU in question supports
mode exclusion. Further, even when perf_event_paranoid is toggled, no
samples are recorded.
This is an unintended side effect of commit:
e3ba76deef ("perf tools: Force uncore events to system wide monitoring)
... which assumes that if a PMU has an associated cpu_map, it is an
uncore PMU, and forces events for such PMUs to be system-wide.
This is not true for arm/arm64 systems, which can have heterogeneous
CPUs. To account for this, multiple CPU PMUs are exposed, each with a
"cpus" field under sysfs, which the perf tool parses into a cpu_map. ARM
PMUs do not have a "cpumask" file, and only have a "cpus" file. For the
gory details as to why, see commit:
7e3fcffe95 ("perf pmu: Support alternative sysfs cpumask")
Given all of this, we can instead identify uncore PMUs by explicitly
checking for a "cpumask" file, and restore arm/arm64 PMU support back to
a working state. This patch does so, adding a new perf_pmu::is_uncore
field, and splitting the existing cpumask parsing so that it can be
reused.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by Will Deacon <will.deacon@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: 4.12+ <stable@vger.kernel.org>
Fixes: e3ba76deef ("perf tools: Force uncore events to system wide monitoring)
Link: http://lkml.kernel.org/r/1507315102-5942-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of u8, use char for prog and map name. It can avoid the
userspace tool getting compiler's signess warning. The
bpf_prog_aux, bpf_map, bpf_attr, bpf_prog_info and
bpf_map_info are changed.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bpf sample program trace_event is enhanced to use the new
helper to print out enabled/running time.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bpf sample program tracex6 is enhanced to use the new
helper to read enabled/running time as well.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
To test ndctl list which use interface of Translate SPA,
nfit_test needs to emulates it.
This test module searches region which includes SPA and
returns 1 dimm handle which is last one.
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
I thought commit 8e9b466799 ("kbuild: use $(abspath ...) instead of
$(shell cd ... && /bin/pwd)") was a safe conversion, but it changed
the behavior.
$(abspath ...) / $(realpath ...) does not expand shell special
characters, such as '~'.
Here is a simple Makefile example:
---------------->8----------------
$(info /bin/pwd: $(shell cd ~/; /bin/pwd))
$(info abspath: $(abspath ~/))
$(info realpath: $(realpath ~/))
all:
@:
---------------->8----------------
$ make
/bin/pwd: /home/masahiro
abspath: /home/masahiro/workspace/~
realpath:
This can be a real problem if 'make O=~/foo' is invoked from another
Makefile or primitive shell like dash.
This commit partially reverts 8e9b466799.
Fixes: 8e9b466799 ("kbuild: use $(abspath ...) instead of $(shell cd ... && /bin/pwd)")
Reported-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Add to error messages the error description by concatenating
output of strerror() function to error messages print out by
gpio-utils.c on IOCTL failures.
Rationalize error messages, while at there, making all of them
look the same.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Prior to commit 55b9b50811 ("perf script: Support -F brstack,dso and
brstacksym,dso"), we were printing a space before the brstack data. It
seems that this space was important. Without it, parsing is difficult.
Very sorry for the mistake.
Notice here how the "ip" and "brstack" run together:
$ perf script -F ip,brstack | head -n 1
22e18c40x22e19e2/0x22e190b/P/-/-/0 0x22e19a1/0x22e19d0/P/-/-/0 0x22e195d/0x22e1990/P/-/-/0 0x22e18e9/0x22e1943/P/-/-/0 0x22e1a69/0x22e18c0/P/-/-/0 0x22e19f7/0x22e1a20/P/-/-/0 0x22e1910/0x22e19ee/P/-/-/0 0x22e19e2/0x22e190b/P/-/-/0 0x22e19a1/0x22e19d0/P/-/-/0 0x22e195d/0x22e1990/P/-/-/0 0x22e18e9/0x22e1943/P/-/-/0 0x22e1a69/0x22e18c0/P/-/-/0 0x22e19f7/0x22e1a20/P/-/-/0 0x22e1910/0x22e19ee/P/-/-/0 0x22e19e2/0x22e190b/P/-/-/0 0x22e19a1/0x22e19d0/P/-/-/0
After this diff, sanity is restored:
$ perf script -F ip,brstack | head -n 1
22e18c4 0x22e19e2/0x22e190b/P/-/-/0 0x22e19a1/0x22e19d0/P/-/-/0 0x22e195d/0x22e1990/P/-/-/0 0x22e18e9/0x22e1943/P/-/-/0 0x22e1a69/0x22e18c0/P/-/-/0 0x22e19f7/0x22e1a20/P/-/-/0 0x22e1910/0x22e19ee/P/-/-/0 0x22e19e2/0x22e190b/P/-/-/0 0x22e19a1/0x22e19d0/P/-/-/0 0x22e195d/0x22e1990/P/-/-/0 0x22e18e9/0x22e1943/P/-/-/0 0x22e1a69/0x22e18c0/P/-/-/0 0x22e19f7/0x22e1a20/P/-/-/0 0x22e1910/0x22e19ee/P/-/-/0 0x22e19e2/0x22e190b/P/-/-/0 0x22e19a1/0x22e19d0/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: 4.13+ <stable@vger.kernel.org>
Fixes: 55b9b50811 ("perf script: Support -F brstack,dso and brstacksym,dso")
Link: http://lkml.kernel.org/r/20171006080722.3442046-1-marksan@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently sprintf is used, and while paths should never exceed
the size of the buffer it is theoretically possible since
dirent.d_name is 256 bytes. As a result this trips
-Wformat-overflow, and since the test is built with -Wall -Werror
the causes the build to fail. Switch to using snprintf and skip
any paths which are too long for the filename buffer.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This is required to use BPF_MAP_TYPE_LPM_TRIE or any other map type
which requires flags.
Signed-off-by: Craig Gallek <kraig@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This library previously assumed a fixed-size map options structure.
Any new options were ignored. In order to allow the options structure
to grow and to support parsing older programs, this patch updates
the maps section parsing to handle varying sizes.
Object files with maps sections smaller than expected will have the new
fields initialized to zero. Object files which have larger than expected
maps sections will be rejected unless all of the unrecognized data is zero.
This change still assumes that each map definition in the maps section
is the same size.
Signed-off-by: Craig Gallek <kraig@google.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The > should be >= so that we don't write one element beyond the end of
the array.
Fixes: 16e7812241 ("selftests/net: Add a test to validate behavior of rx timestamps")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds tests for the vsock_diag.ko module.
These tests are not self-tests because they require manual set up of a
KVM or VMware guest. Please see tools/testing/vsock/README for
instructions.
The control.h and timeout.h infrastructure can be used for additional
AF_VSOCK tests in the future.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
. Two functions from different binaries can have same start address. Thus,
comparing only start address in match_chain() leads to inconsistent
callchains. Fix this by adding a check for dsos as well (Ravi Bangoria)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----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=U+wc
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-4.14-20171005' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fix from Arnaldo Carvalho de Melo:
- Two functions from different binaries can have the same start address. Thus,
comparing only the start address in match_chain() leads to inconsistent
callchains. Fix this by adding a check for DSOs as well (Ravi Bangoria)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix fix regression in silencing output from RUN_TESTS introduced by
commit <8230b905a6780c6> selftests: mqueue: Use full path to run tests
from Makefile
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
sysret_ss_attrs fails to compile leading x86 test run to fail on systems
configured to build using PIE by default. Add -no-pie fix it.
Relocation might still fail if relocated above 4G. For now this change
fixes the build and runs x86 tests.
tools/testing/selftests/x86$ make
gcc -m64 -o .../tools/testing/selftests/x86/single_step_syscall_64 -O2
-g -std=gnu99 -pthread -Wall single_step_syscall.c -lrt -ldl
gcc -m64 -o .../tools/testing/selftests/x86/sysret_ss_attrs_64 -O2 -g
-std=gnu99 -pthread -Wall sysret_ss_attrs.c thunks.S -lrt -ldl
/usr/bin/ld: /tmp/ccS6pvIh.o: relocation R_X86_64_32S against `.text'
can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: final link failed: Nonrepresentable section on output
collect2: error: ld returned 1 exit status
Makefile:49: recipe for target
'.../tools/testing/selftests/x86/sysret_ss_attrs_64' failed
make: *** [.../tools/testing/selftests/x86/sysret_ss_attrs_64] Error 1
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Two functions from different binaries can have same start address. Thus,
comparing only start address in match_chain() leads to inconsistent
callchains. Fix this by adding a check for dsos as well.
Ex, https://www.spinics.net/lists/linux-perf-users/msg04067.html
Reported-by: Alexander Pozdneev <pozdneyev@gmail.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: zhangmengting@huawei.com
Link: http://lkml.kernel.org/r/20171005091234.5874-1-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add documentation for bpftool. Separate files for each subcommand.
Use rst format. Documentation is compiled into man pages using
rst2man.
Signed-off-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a simple tool for querying and updating BPF objects on the system.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently only have BPF tools in the tools/net directory.
We are about to add more BPF tools there, not necessarily
networking related, rename the directory and related Makefile
targets to bpf.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
add support for BPF_PROG_QUERY command to libbpf
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
tools/include/uapi/linux/bpf.h got out of sync with actual kernel header.
Update it.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
introduce bpf_prog_detach2() that takes one more argument prog_fd
vs bpf_prog_detach() that takes only attach_fd and type.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
with addition of tnum logic the verifier got smart enough and
we can enforce return codes at program load time.
For now do so for cgroup-bpf program types.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
usbip_host_driver.h now depends on several additional headers, which
need to be installed along with it.
Fixes: 021aed8453 ("staging: usbip: userspace: migrate usbip_host_driver ...")
Fixes: 3391ba0e27 ("usbip: tools: Extract generic code to be shared with ...")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPICA commit 610046d444ad781cc36673bf1f030abe50cbc61f
Improve adherence to ACPI spec for implicit and explicit conversions
Adds octal support for constants in ASL code
Adds integer overflow errors for constants during ASL compilation
Eliminates most of the existing complex flags parameters
Simplify support for implicit/explicit runtime conversions
Adds one new file, utilities/utstrsuppt.c
Link: https://github.com/acpica/acpica/commit/610046d444ad
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We started to use group read whenever it's possible:
82bf311e15 perf stat: Use group read for event groups
That breaks some of attr tests, this change adds the new possible
read_format value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
LPU-Reference: 20170928160633.GA26973@krava
Link: http://lkml.kernel.org/n/tip-1ko2zc4nph93d8lfwjyk9ivz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The proc files which is sorted with alphabetical order are evenly
assigned to several synthesize threads to be processed in parallel.
For 'perf top', the threads number hard code to online CPU number. The
following patch will introduce an option to set it.
For other perf tools, the thread number is 1. Because the process
function is not ready for multithreading, e.g.
process_synthesized_event.
This patch series only support event synthesize multithreading for 'perf
top'. For other tools, it can be done separately later.
With multithread applied, the total processing time can get up to 1.56x
speedup on Knights Mill for 'perf top'.
For specific single event processing, the processing time could increase
because of the lock contention. So proc_map_timeout may need to be
increased. Otherwise some proc maps will be truncated.
Based on my test, increasing the proc_map_timeout has small impact
on the total processing time. The total processing time still get 1.49x
speedup on Knights Mill after increasing the proc_map_timeout.
The patch itself doesn't increase the proc_map_timeout.
Doesn't need to implement multithreading for per task monitoring,
perf_event__synthesize_thread_map. It doesn't have performance issue.
Committer testing:
# getconf _NPROCESSORS_ONLN
4
# perf trace --no-inherit -e clone -o /tmp/output perf top
# tail -4 /tmp/bla
0.124 ( 0.041 ms): clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7fc3eb3a8f30, parent_tidptr: 0x7fc3eb3a99d0, child_tidptr: 0x7fc3eb3a99d0, tls: 0x7fc3eb3a9700) = 9548 (perf)
0.246 ( 0.023 ms): clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7fc3eaba7f30, parent_tidptr: 0x7fc3eaba89d0, child_tidptr: 0x7fc3eaba89d0, tls: 0x7fc3eaba8700) = 9549 (perf)
0.286 ( 0.019 ms): clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7fc3ea3a6f30, parent_tidptr: 0x7fc3ea3a79d0, child_tidptr: 0x7fc3ea3a79d0, tls: 0x7fc3ea3a7700) = 9550 (perf)
246.540 ( 0.047 ms): clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7fc3ea3a6f30, parent_tidptr: 0x7fc3ea3a79d0, child_tidptr: 0x7fc3ea3a79d0, tls: 0x7fc3ea3a7700) = 9551 (perf)
#
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Lukasz Odzioba <lukasz.odzioba@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1506696477-146932-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add comm_str_lock to protect comm_str rb tree.
The lock is only needed for multithreaded code, so using mutex wrappers
provided by perf tool.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Lukasz Odzioba <lukasz.odzioba@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1506696477-146932-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add two locks to protect namespaces_list and comm_list.
The lock is only needed for multithreaded code, so using mutex wrappers
provided by perf tool.
Not all the comm_list/namespaces_list accessing are protected, e.g.
thread__exec_comm. Because the multithread code for perf top event
synthesizing does not touch them. They don't need a lock.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Lukasz Odzioba <lukasz.odzioba@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1506696477-146932-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Command perf test -v 16 (Setup struct perf_event_attr test) always
reports success even if the test case fails. It works correctly if you
also specify -F (for don't fork).
root@s35lp76 perf]# ./perf test -v 16
15: Setup struct perf_event_attr :
--- start ---
running './tests/attr/test-record-no-delay'
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB /tmp/tmp4E1h7R/perf.data
(1 samples) ]
expected task=0, got 1
expected precise_ip=0, got 3
expected wakeup_events=1, got 0
FAILED './tests/attr/test-record-no-delay' - match failure
test child finished with 0
---- end ----
Setup struct perf_event_attr: Ok
The reason for the wrong error reporting is the return value of the
system() library call. It is called in run_dir() file tests/attr.c and
returns the exit status, in above case 0xff00.
This value is given as parameter to the exit() function which can only
handle values 0-0xff.
The child process terminates with exit value of 0 and the parent does
not detect any error.
This patch corrects the error reporting and prints the correct test
result.
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
LPU-Reference: 20170913081209.39570-2-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-rdube6rfcjsr1nzue72c7lqn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit d78ada4a76 ("perf tests attr: Do not store failed events") does
not create an event file in the /tmp directory when the
perf_open_event() system call failed.
This can lead to a situation where not /tmp/event-xx-yy-zz result file
exists at all (for example on a s390x virtual machine environment) where
no CPUMF hardware is available.
The following command then fails with a python call back chain instead
of printing failure:
[root@s8360046 perf]# /usr/bin/python2 ./tests/attr.py -d ./tests/attr/ \
-p ./perf -v -ttest-stat-basic
running './tests/attr//test-stat-basic'
Traceback (most recent call last):
File "./tests/attr.py", line 379, in <module>
main()
File "./tests/attr.py", line 370, in main
run_tests(options)
File "./tests/attr.py", line 311, in run_tests
Test(f, options).run()
File "./tests/attr.py", line 300, in run
self.compare(self.expect, self.result)
File "./tests/attr.py", line 248, in compare
exp_event.diff(res_event)
UnboundLocalError: local variable 'res_event' referenced before assignment
[root@s8360046 perf]#
This patch catches this pitfall and prints an error message instead:
[root@s8360047 perf]# /usr/bin/python2 ./tests/attr.py -d ./tests/attr/ \
-p ./perf -vvv -ttest-stat-basic
running './tests/attr//test-stat-basic'
loading expected events
Event event:base-stat
fd = 1
group_fd = -1
flags = 0|8
[....]
sample_regs_user = 0
sample_stack_user = 0
'PERF_TEST_ATTR=/tmp/tmpJbMQMP ./perf stat -o /tmp/tmpJbMQMP/perf.data -e cycles kill >/dev/null 2>&1' ret '1', expected '1'
loading result events
compare
matching [event:base-stat]
match: [event:base-stat] matches []
res_event is empty
FAILED './tests/attr//test-stat-basic' - match failure
[root@s8360047 perf]#
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
LPU-Reference: 20170913081209.39570-1-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-04d63nn7svfgxdhi60gq2mlm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_event_attr::task is 1 by default for first (tracking) event in
the session. Setting task=1 as default and adding task=0 for cases that
need it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-16-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Thomas Gleixner:
- Prevent a division by zero in the perf aux buffer handling
- Sync kernel headers with perf tool headers
- Fix a build failure in the syscalltbl code
- Make the debug messages of perf report --call-graph work correctly
- Make sure that all required perf files are in the MANIFEST for
container builds
- Fix the atrr.exclude kernel handling so it respects the
perf_event_paranoid and the user permissions
- Make perf test on s390x work correctly
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/aux: Only update ->aux_wakeup in non-overwrite mode
perf test: Fix vmlinux failure on s390x part 2
perf test: Fix vmlinux failure on s390x
perf tools: Fix syscalltbl build failure
perf report: Fix debug messages with --call-graph option
perf evsel: Fix attr.exclude_kernel setting for default cycles:p
tools include: Sync kernel ABI headers with tooling headers
perf tools: Get all of tools/{arch,include}/ in the MANIFEST
This patch tests newly added fields of the bpf_attr,
bpf_prog_info and bpf_map_info.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch swaps the checking order. It now checks the map_info
first and then prog_info. It is a prep work for adding
test to the newly added fields (the map_ids of prog_info field
in particular).
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch extends the libbpf to provide API support to
allow specifying BPF object name.
In tools/lib/bpf/libbpf, the C symbol of the function
and the map is used. Regarding section name, all maps are
under the same section named "maps". Hence, section name
is not a good choice for map's name. To be consistent with
map, bpf_prog also follows and uses its function symbol as
the prog's name.
This patch adds logic to collect function's symbols in libbpf.
There is existing codes to collect the map's symbols and no change
is needed.
The bpf_load_program_name() and bpf_map_create_name() are
added to take the name argument. For the other bpf_map_create_xxx()
variants, a name argument is directly added to them.
In samples/bpf, bpf_load.c in particular, the symbol is also
used as the map's name and the map symbols has already been
collected in the existing code. For bpf_prog, bpf_load.c does
not collect the function symbol name. We can consider to collect
them later if there is a need to continue supporting the bpf_load.c.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move private definitions to command emulation.
These definitions were originally defined at include/uapi/linux/ndctl.h,
but they are used at only nfit_test emulation now.
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
On s390x perf test 1 failed. It turned out that commit cf6383f73c
("perf report: Fix kernel symbol adjustment for s390x") was incorrect.
The previous implementation in dso__load_sym() is also suitable for
s390x.
Therefore this patch undoes commit cf6383f73c
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Fixes: cf6383f73c ("perf report: Fix kernel symbol adjustment for s390x")
LPU-Reference: 20170915071404.58398-2-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-v101o8k25vuja2ogosgf15yy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On s390x perf test 1 failed. It turned out that commit 4a084ecfc8
("perf report: Fix module symbol adjustment for s390x") was incorrect.
The previous implementation in dso__load_sym() is also suitable for
s390x.
Therefore this patch undoes commit 4a084ecfc8.
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com>
Fixes: 4a084ecfc8 ("perf report: Fix module symbol adjustment for s390x")
LPU-Reference: 20170915071404.58398-1-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-5ani7ly57zji7s0hmzkx416l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If asm code specifies an UNWIND_HINT_EMPTY hint, don't warn if the
section ends unexpectedly. This can happen with the xen-head.S code
because the hypercall_page is "text" but it's all zeros.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/ddafe199dd8797e40e3c2777373347eba1d65572.1505764066.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Arnd Bergmann reported a bunch of warnings like:
crypto/jitterentropy.o: warning: objtool: jent_fold_time()+0x3b: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_stuck()+0x1d: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_unbiased_bit()+0x15: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_read_entropy()+0x32: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_entropy_collector_free()+0x19: call without frame pointer save/setup
and
arch/x86/events/core.o: warning: objtool: collect_events uses BP as a scratch register
arch/x86/events/core.o: warning: objtool: events_ht_sysfs_show()+0x22: call without frame pointer save/setup
With certain rare configurations, GCC sometimes sets up the frame
pointer with:
lea (%rsp),%rbp
instead of:
mov %rsp,%rbp
The instructions are equivalent, so treat the former like the latter.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a468af8b28a69b83fffc6d7668be9b6fcc873699.1506526584.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This update consists of:
- fixes to several existing tests
- a test for regression introduced by
b9470c2760 ("inet: kill smallest_size and smallest_port")
- seccomp support for glibc 2.26 siginfo_t.h
- fixes to kselftest framework and tests to run make O=dir use-case
- fixes to silence unnecessary test output to de-clutter test results
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJZy7S7AAoJEAsCRMQNDUMcAt0P/iuR279yaBF3RVqHTyXsmr/t
RO6k4uj4XLYKTrVnV/YTu5hLCGO9fPDhprMmrTqlAGclioEyMDtRTOWDDln4TNFh
gehbXiOTVVHlLPCOXXRwvU+RsMppgi4O2WRTBK0dnTkBdl+sTLOl4iywGyqFPB11
O3oj1nNc8ruaxYoUMYwxiGCm1OATrngoSu/Y4mMhZPgT9MnCtZWDlg//kkrxQDHO
UTD11zk17nBAOw2q4nw3I4un00tgN8RzIOfg9g47Az40LjWSG5c5oAgd/hArqeBv
7pCUR1PnNKTf0RujX0nfaoQQ+bOEXqpV9GmM67HLo8Q/5e4lYxWdmSdhItPS5qtS
ZLo1lEMOuRH7+FCQuD236llhwKVMm/+R3jnXgdJcc+SupdGCmpzZ9P8rscX1g11R
ZDZ9+k8XOA2p7ufxSIGFEILSovn0FUMneOd3Nhwk40R7cIvSiZh+V+Xzdb6Q1K9T
NBVtH8qvRi5TyHSNwQCDF45fC6bCM80JxGcPToOguFsQTcUL6B0pG6xhxZG73+Ut
br+Z5y+g+JLWLeGzaBjo4LnqFpeP6w4Jb8CCrqu8BussV3BToIFCJkGX6aOggow/
D3g03tGDeMjqFMYwn0ZCH5s5u9cicWUUC8CBvoCJp2UZaE/prsNNfRjZjfwYlrVj
TvWPdPJtwjA/sdq/n2Hl
=FUuY
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"This update consists of:
- fixes to several existing tests
- a test for regression introduced by b9470c2760 ("inet: kill
smallest_size and smallest_port")
- seccomp support for glibc 2.26 siginfo_t.h
- fixes to kselftest framework and tests to run make O=dir use-case
- fixes to silence unnecessary test output to de-clutter test results"
* tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (28 commits)
selftests: timers: set-timer-lat: Fix hang when testing unsupported alarms
selftests: timers: set-timer-lat: fix hang when std out/err are redirected
selftests/memfd: correct run_tests.sh permission
selftests/seccomp: Support glibc 2.26 siginfo_t.h
selftests: futex: Makefile: fix for loops in targets to run silently
selftests: Makefile: fix for loops in targets to run silently
selftests: mqueue: Use full path to run tests from Makefile
selftests: futex: copy sub-dir test scripts for make O=dir run
selftests: lib.mk: copy test scripts and test files for make O=dir run
selftests: sync: kselftest and kselftest-clean fail for make O=dir case
selftests: sync: use TEST_CUSTOM_PROGS instead of TEST_PROGS
selftests: lib.mk: add TEST_CUSTOM_PROGS to allow custom test run/install
selftests: watchdog: fix to use TEST_GEN_PROGS and remove clean
selftests: lib.mk: fix test executable status check to use full path
selftests: Makefile: clear LDFLAGS for make O=dir use-case
selftests: lib.mk: kselftest and kselftest-clean fail for make O=dir case
Makefile: kselftest and kselftest-clean fail for make O=dir case
selftests/net: msg_zerocopy enable build with older kernel headers
selftests: actually run the various net selftests
selftest: add a reuseaddr test
...
Add various test_verifier selftests, and a simple xdp/tc functional
test that is being attached to veths. Also let new versions of clang
use the recently added -mcpu=probe support [1] for the BPF target,
so that it can probe the underlying kernel for BPF insn set extensions.
We could also just set this options always, where older versions just
ignore it and give a note to the user that the -mcpu value is not
supported, but given emitting the note cannot be turned off from clang
side lets not confuse users running selftests with it, thus fallback
to the default generic one when we see that clang doesn't support it.
Also allow CPU option to be overridden in the Makefile from command
line.
[1] d7276a40d8
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Looks like a couple of updates missed to get carried into tools/include/uapi/,
so copy the bpf.h header as usual to pull in latest updates.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When timer_create() fails on a bootime or realtime clock, setup_timer()
returns 0 as if timer has been set. Callers wait forever for the timer
to expire.
This hang is seen on a system that doesn't have support for:
CLOCK_REALTIME_ALARM ABSTIME missing CAP_WAKE_ALARM? : [UNSUPPORTED]
Test hangs waiting for a timer that hasn't been set to expire. Fix
setup_timer() to return 1, add handling in callers to detect the
unsupported case and return 0 without waiting to not fail the test.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
do_timer_oneshot() uses select() as a timer with FD_SETSIZE and readfs
is cleared with FD_ZERO without FD_SET.
When stdout and stderr are redirected, the test hangs in select forever.
Fix the problem calling select() with readfds empty and nfds zero. This
is sufficient for using select() for timer.
With this fix "./set-timer-lat > /dev/null 2>&1" no longer hangs.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
to fix the following issue:
------------------
TAP version 13
selftests: run_tests.sh
========================================
selftests: Warning: file run_tests.sh is not executable, correct this.
not ok 1..1 selftests: run_tests.sh [FAIL]
------------------
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The 2.26 release of glibc changed how siginfo_t is defined, and the earlier
work-around to using the kernel definition are no longer needed. The old
way needs to stay around for a while, though.
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Fix for loops in targets to run silently to avoid cluttering the test
results.
Suppresses the following from targets:
for DIR in functional; do \
BUILD_TARGET=./tools/testing/selftests/futex/$DIR; \
mkdir $BUILD_TARGET -p; \
make OUTPUT=$BUILD_TARGET -C $DIR all;\
done
./tools/testing/selftests/futex/run.sh
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Fix for loops in targets to run silently to avoid cluttering the test
results.
Suppresses the following from targets: e.g run from breakpoints
for TARGET in breakpoints; do \
BUILD_TARGET=$BUILD/$TARGET; \
mkdir $BUILD_TARGET -p; \
make OUTPUT=$BUILD_TARGET -C $TARGET;\
done;
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Use full path including $(OUTPUT) to run tests from Makefile for
normal case when objects reside in the source tree as well as when
objects are relocated with make O=dir. In both cases $(OUTPUT) will
be set correctly by lib.mk.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
For make O=dir run_tests to work, test scripts from sub-directories
need to be copied over to the object directory. Running tests from the
object directory is necessary to avoid making the source tree dirty.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The build of kernel v4.14-rc1 for i686 fails on RHEL 6 with the error
in tools/perf:
util/syscalltbl.c:157: error: expected ';', ',' or ')' before '__maybe_unused'
mv: cannot stat `util/.syscalltbl.o.tmp': No such file or directory
Fix it by placing/moving:
#include <linux/compiler.h>
outside of #ifdef HAVE_SYSCALL_TABLE block.
Signed-off-by: Akemi Yagi <toracat@elrepo.org>
Cc: Alan Bartlett <ajb@elrepo.org>
Link: http://lkml.kernel.org/r/oq41r8$1v9$1@blaine.gmane.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With --call-graph option, perf report can display call chains using
type, min percent threshold, optional print limit and order. And the
default call-graph parameter is 'graph,0.5,caller,function,percent'.
Before this patch, 'perf report --call-graph' shows incorrect debug
messages as below:
# perf report --call-graph
Invalid callchain mode: 0.5
Invalid callchain order: 0.5
Invalid callchain sort key: 0.5
Invalid callchain config key: 0.5
Invalid callchain mode: caller
Invalid callchain mode: function
Invalid callchain order: function
Invalid callchain mode: percent
Invalid callchain order: percent
Invalid callchain sort key: percent
That is because in function __parse_callchain_report_opt(),each field of
the call-graph parameter is passed to parse_callchain_{mode,order,
sort_key,value} in turn until it meets the matching value.
For example, the order field "caller" is passed to
parse_callchain_mode() firstly and obviously it doesn't match any mode
field. Therefore parse_callchain_mode() will shows the debug message
"Invalid callchain mode: caller", which could confuse users.
The patch fixes this issue by moving the warning out of the function
parse_callchain_{mode,order,sort_key,value}.
Signed-off-by: Mengting Zhang <zhangmengting@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1506154694-39691-1-git-send-email-zhangmengting@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Yet another fix for probing the max attr.precise_ip setting: it is not
enough settting attr.exclude_kernel for !root users, as they _can_
profile the kernel if the kernel.perf_event_paranoid sysctl is set to
-1, so check that as well.
Testing it:
As non root:
$ sysctl kernel.perf_event_paranoid
kernel.perf_event_paranoid = 2
$ perf record sleep 1
$ perf evlist -v
cycles:uppp: ..., exclude_kernel: 1, ... precise_ip: 3, ...
Now as non-root, but with kernel.perf_event_paranoid set set to the
most permissive value, -1:
$ sysctl kernel.perf_event_paranoid
kernel.perf_event_paranoid = -1
$ perf record sleep 1
$ perf evlist -v
cycles:ppp: ..., exclude_kernel: 0, ... precise_ip: 3, ...
$
I.e. non-root, default kernel.perf_event_paranoid: :uppp modifier = not allowed to sample the kernel,
non-root, most permissible kernel.perf_event_paranoid: :ppp = allowed to sample the kernel.
In both cases, use the highest available precision: attr.precise_ip = 3.
Reported-and-Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: d37a369790 ("perf evsel: Fix attr.exclude_kernel setting for default cycles:p")
Link: http://lkml.kernel.org/n/tip-nj2qkf75xsd6pw6hhjzfqqdx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Time for a sync with ABI/uapi headers with the upcoming v4.14 kernel.
None of the ABI changes require any source code level changes to our
existing in-kernel tooling code:
- tools/arch/s390/include/uapi/asm/kvm.h:
New KVM_S390_VM_TOD_EXT ABI, not used by in-kernel tooling.
- tools/arch/x86/include/asm/cpufeatures.h:
tools/arch/x86/include/asm/disabled-features.h:
New PCID, SME and VGIF x86 CPU feature bits defined.
- tools/include/asm-generic/hugetlb_encode.h:
tools/include/uapi/asm-generic/mman-common.h:
tools/include/uapi/linux/mman.h:
Two new madvise() flags, plus a hugetlb system call mmap flags
restructuring/extension changes.
- tools/include/uapi/drm/drm.h:
tools/include/uapi/drm/i915_drm.h:
New drm_syncobj_create flags definitions, new drm_syncobj_wait
and drm_syncobj_array ABIs. DRM_I915_PERF_* calls and a new
I915_PARAM_HAS_EXEC_FENCE_ARRAY ABI for the Intel driver.
- tools/include/uapi/linux/bpf.h:
New bpf_sock fields (::mark and ::priority), new XDP_REDIRECT
action, new kvm_ppc_smmu_info fields (::data_keys, instr_keys)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170913073823.lxmi4c7ejqlfabjx@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that I'm switching the container builds from using a local volume
pointing to the kernel repository with the perf sources, instead getting
a detached tarball to be able to use a container cluster, some places
broke because I forgot to put some of the required files in
tools/perf/MANIFEST, namely some bitsperlong.h files.
So, to fix it do the same as for tools/build/ and pack the whole
tools/arch/ directory.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wmenpjfjsobwdnfde30qqncj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull x86 fixes from Ingo Molnar:
"Another round of CR3/PCID related fixes (I think this addresses all
but one of the known problems with PCID support), an objtool fix plus
a Clang fix that (finally) solves all Clang quirks to build a bootable
x86 kernel as-is"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Fix inline asm call constraints for Clang
objtool: Handle another GCC stack pointer adjustment bug
x86/mm/32: Load a sane CR3 before cpu_init() on secondary CPUs
x86/mm/32: Move setup_clear_cpu_cap(X86_FEATURE_PCID) earlier
x86/mm/64: Stop using CR3.PCID == 0 in ASID-aware code
x86/mm: Factor out CR3-building code
For inline asm statements which have a CALL instruction, we list the
stack pointer as a constraint to convince GCC to ensure the frame
pointer is set up first:
static inline void foo()
{
register void *__sp asm(_ASM_SP);
asm("call bar" : "+r" (__sp))
}
Unfortunately, that pattern causes Clang to corrupt the stack pointer.
The fix is easy: convert the stack pointer register variable to a global
variable.
It should be noted that the end result is different based on the GCC
version. With GCC 6.4, this patch has exactly the same result as
before:
defconfig defconfig-nofp distro distro-nofp
before 9820389 9491555 8816046 8516940
after 9820389 9491555 8816046 8516940
With GCC 7.2, however, GCC's behavior has changed. It now changes its
behavior based on the conversion of the register variable to a global.
That somehow convinces it to *always* set up the frame pointer before
inserting *any* inline asm. (Therefore, listing the variable as an
output constraint is a no-op and is no longer necessary.) It's a bit
overkill, but the performance impact should be negligible. And in fact,
there's a nice improvement with frame pointers disabled:
defconfig defconfig-nofp distro distro-nofp
before 9796316 9468236 9076191 8790305
after 9796957 9464267 9076381 8785949
So in summary, while listing the stack pointer as an output constraint
is no longer necessary for newer versions of GCC, it's still needed for
older versions.
Suggested-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/3db862e970c432ae823cf515c52b54fec8270e0e.1505942196.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The kbuild bot reported the following warning with GCC 4.4 and a
randconfig:
net/socket.o: warning: objtool: compat_sock_ioctl()+0x1083: stack state mismatch: cfa1=7+160 cfa2=-1+0
This is caused by another GCC non-optimization, where it backs up and
restores the stack pointer for no apparent reason:
2f91: 48 89 e0 mov %rsp,%rax
2f94: 4c 89 e7 mov %r12,%rdi
2f97: 4c 89 f6 mov %r14,%rsi
2f9a: ba 20 00 00 00 mov $0x20,%edx
2f9f: 48 89 c4 mov %rax,%rsp
This issue would have been happily ignored before the following commit:
dd88a0a0c8 ("objtool: Handle GCC stack pointer adjustment bug")
But now that objtool is paying attention to such stack pointer writes
to/from a register, it needs to understand them properly. In this case
that means recognizing that the "mov %rsp, %rax" instruction is
potentially a backup of the stack pointer.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: dd88a0a0c8 ("objtool: Handle GCC stack pointer adjustment bug")
Link: http://lkml.kernel.org/r/8c7aa8e9a36fbbb6655d9d8e7cea58958c912da8.1505942196.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- sysctl and seccomp operation to discover available actions. (tyhicks)
- new per-filter configurable logging infrastructure and sysctl. (tyhicks)
- SECCOMP_RET_LOG to log allowed syscalls. (tyhicks)
- SECCOMP_RET_KILL_PROCESS as the new strictest possible action.
- self-tests for new behaviors.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Kees Cook <kees@outflux.net>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=sKeC
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
"Major additions:
- sysctl and seccomp operation to discover available actions
(tyhicks)
- new per-filter configurable logging infrastructure and sysctl
(tyhicks)
- SECCOMP_RET_LOG to log allowed syscalls (tyhicks)
- SECCOMP_RET_KILL_PROCESS as the new strictest possible action
- self-tests for new behaviors"
[ This is the seccomp part of the security pull request during the merge
window that was nixed due to unrelated problems - Linus ]
* tag 'seccomp-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
samples: Unrename SECCOMP_RET_KILL
selftests/seccomp: Test thread vs process killing
seccomp: Implement SECCOMP_RET_KILL_PROCESS action
seccomp: Introduce SECCOMP_RET_KILL_PROCESS
seccomp: Rename SECCOMP_RET_KILL to SECCOMP_RET_KILL_THREAD
seccomp: Action to log before allowing
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW
seccomp: Selftest for detection of filter flag support
seccomp: Sysctl to configure actions that are allowed to be logged
seccomp: Operation for checking if an action is available
seccomp: Sysctl to display available actions
seccomp: Provide matching filter for introspection
selftests/seccomp: Refactor RET_ERRNO tests
selftests/seccomp: Add simple seccomp overhead benchmark
selftests/seccomp: Add tests for basic ptrace actions
- Support direct --user-regs arguments in 'perf record', previously the
only way to sample PERF_SAMPLE_REGS_USER was implicitly selecting it
when recording callchains (Andi Kleen)
- Support showing sampled user regs in 'perf script' (Andi Kleen)
- Introduce the concept of weak groups in 'perf stat': try to set up a
group, but if it's not schedulable fallback to not using a group. That
gives us the best of both worlds: groups if they work, but still a
usable fallback if they don't. E.g: (Andi Kleen)
% perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}:W' -a sleep 1
125,366,055 branches (80.02%)
9,208,402 branch-misses # 7.35% of all branches (80.01%)
24,560,249 l1d.replacement (80.00%)
43,174,971 l2_lines_in.all (80.05%)
31,891,457 l2_rqsts.all_code_rd (79.92%)
- Support metrics in 'stat' and 'list'. A metric is a formula that
uses multiple events to compute a higher level result (e.g. IPC). (Andi Kleen)
- Add Intel processors vendor event metrics JSON files (Andi Kleen)
- Add 'pid' and 'tid' options to 'perf sched timehist' (David Ahern)
- Generate 'behavior' string table from kernel headers, helps getting
new parameters when synchronizing kernel headers, like MADV_WIPEONFORK
and MADV_KEEPONFORK, that are now beautied (Arnaldo Carvalho de Melo)
- Improve TUI progress bar by showing how many bytes from a total were
processed (Jiri Olsa)
- Use scandir() to replace readdir(), prep work to have the synthesizing
of PERF_RECORD_ entries for existing threads be multithreaded, making
'perf top' bearable on high core count systems such as Intel's Knights
Landing/Mill (Kan Liang)
- Allow creating a ~/.perfconfig file when setting a variable to its
default value, previously it would bail out and not write such a
file (Taeung Song)
- Introduce wrapper for allowing purely single threaded apps to avoid
the costs of locking (Arnaldo Carvalho de Melo)
- Introduce hashtable to reduce the cost of thread lookup
- Fix build C++ build wrt poison.h using void pointer arithmetic,
affects only the embedded clang/llvm case, that is disabled by
default (Arnaldo Carvalho de Melo)
- Fix leaking rec_argv in error cases (Martin Kepplinger)
- Remove Intel CQM perf test, that infrastructure was nuked (Xiaochen Shen)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----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=oNFx
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.15-20170922' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
- Support direct --user-regs arguments in 'perf record', previously the
only way to sample PERF_SAMPLE_REGS_USER was implicitly selecting it
when recording callchains (Andi Kleen)
- Support showing sampled user regs in 'perf script' (Andi Kleen)
- Introduce the concept of weak groups in 'perf stat': try to set up a
group, but if it's not schedulable fallback to not using a group. That
gives us the best of both worlds: groups if they work, but still a
usable fallback if they don't. E.g: (Andi Kleen)
% perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}:W' -a sleep 1
125,366,055 branches (80.02%)
9,208,402 branch-misses # 7.35% of all branches (80.01%)
24,560,249 l1d.replacement (80.00%)
43,174,971 l2_lines_in.all (80.05%)
31,891,457 l2_rqsts.all_code_rd (79.92%)
- Support metrics in 'stat' and 'list'. A metric is a formula that
uses multiple events to compute a higher level result (e.g. IPC). (Andi Kleen)
- Add Intel processors vendor event metrics JSON files (Andi Kleen)
- Add 'pid' and 'tid' options to 'perf sched timehist' (David Ahern)
- Generate 'behavior' string table from kernel headers, helps getting
new parameters when synchronizing kernel headers, like MADV_WIPEONFORK
and MADV_KEEPONFORK, that are now beautied (Arnaldo Carvalho de Melo)
- Improve TUI progress bar by showing how many bytes from a total were
processed (Jiri Olsa)
- Use scandir() to replace readdir(), prep work to have the synthesizing
of PERF_RECORD_ entries for existing threads be multithreaded, making
'perf top' bearable on high core count systems such as Intel's Knights
Landing/Mill (Kan Liang)
- Allow creating a ~/.perfconfig file when setting a variable to its
default value, previously it would bail out and not write such a
file (Taeung Song)
- Introduce wrapper for allowing purely single threaded apps to avoid
the costs of locking (Arnaldo Carvalho de Melo)
- Introduce hashtable to reduce the cost of thread lookup
- Fix build C++ build wrt poison.h using void pointer arithmetic,
affects only the embedded clang/llvm case, that is disabled by
default (Arnaldo Carvalho de Melo)
- Fix leaking rec_argv in error cases (Martin Kepplinger)
- Remove Intel CQM perf test, that infrastructure was nuked (Xiaochen Shen)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull libnvdimm fixes from Dan Williams:
"A crash fix and corresponding regression test enabling for the crash
scenario. The unit test for this crash is available in ndctl-v58.2.
This branch has received a build success notification from the
0day-kbuild robot over 148 configs. The fix is tagged for -stable /
backport to 4.13"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm, namespace: fix btt claim class crash
tools/testing/nvdimm: disable labels for nfit_test.1
BPF samples fail to build when cross-compiling for ARM64 because of incorrect
pt_regs param selection. This is because clang defines __x86_64__ and
bpf_headers thinks we're building for x86. Since clang is building for the BPF
target, it shouldn't make assumptions about what target the BPF program is
going to run on. To fix this, lets pass ARCH so the header knows which target
the BPF program is being compiled for and can use the correct pt_regs code.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andi reported a performance drop in single threaded perf tools such as
'perf script' due to the growing number of locks being put in place to
allow for multithreaded tools, so wrap the POSIX threads rwlock routines
with the names used for such kinds of locks in the Linux kernel and then
allow for tools to ask for those locks to be used or not.
I.e. a tool may have a multithreaded phase and then switch to single
threaded, like the upcoming patches for the synthesizing of
PERF_RECORD_{FORK,MMAP,etc} for pre-existing processes to then switch to
single threaded mode in 'perf top'.
The init routines will not be conditional, this way starting as single
threaded to then move to multi threaded mode should be possible.
Reported-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170404161739.GH12903@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LIST_POISON[12] are used to initialize list_head and hlist_node
pointers, and do void pointer arithmetic, which C++ doesn't like, so, to
avoid drifting from the kernel by introducing some HLIST_POISON to do
away with void pointer math, just make those poisoned pointers be NULL
when building it with a C++ compiler.
Noticed with:
$ make LLVM_CONFIG=/usr/bin/llvm-config-3.9 LIBCLANGLLVM=1
CXX util/c++/clang.o
CXX util/c++/clang-test.o
In file included from /home/lizj/linux/tools/include/linux/list.h:5:0,
from /home/lizj/linux/tools/perf/util/namespaces.h:13,
from /home/lizj/linux/tools/perf/util/util.h:15,
from /home/lizj/linux/tools/perf/util/util-cxx.h:20,
from util/c++/clang-c.h:5,
from util/c++/clang-test.cpp:2:
/home/lizj/linux/tools/include/linux/list.h: In function ‘void list_del(list_head*)’:
/home/lizj/linux/tools/include/linux/poison.h:14:31: error: pointer of type ‘void *’ used in arithmetic [-Werror=pointer-arith]
# define POISON_POINTER_DELTA 0
^
/home/lizj/linux/tools/include/linux/poison.h:22:41: note: in expansion of macro ‘POISON_POINTER_DELTA’
#define LIST_POISON1 ((void *) 0x100 + POISON_POINTER_DELTA)
^
/home/lizj/linux/tools/include/linux/list.h:107:16: note: in expansion of macro ‘LIST_POISON1’
entry->next = LIST_POISON1;
^
In file included from /home/lizj/linux/tools/perf/util/namespaces.h:13:0,
from /home/lizj/linux/tools/perf/util/util.h:15,
from /home/lizj/linux/tools/perf/util/util-cxx.h:20,
from util/c++/clang-c.h:5,
from util/c++/clang-test.cpp:2:
/home/lizj/linux/tools/include/linux/list.h:107:14: error: invalid conversion from ‘void*’ to ‘list_head*’ [-fpermissive]
Reported-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Philip Li <philip.li@intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-m5ei2o0mjshucbr28baf5lqz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that I'm switching the container builds from using a local volume
pointing to the kernel repository with the perf sources, instead getting
a detached tarball to be able to use a container cluster, some places
broke because I forgot to put some of the required files in
tools/perf/MANIFEST, namely some bitsperlong.h files.
So, to fix it do the same as for tools/build/ and pack the whole
tools/arch/ directory.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wmenpjfjsobwdnfde30qqncj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is one more case where the way that syscall parameter values are
defined in kernel headers are easy to parse using a shell script that
will then generate the string table that gets used by the madvise
'behaviour' argument beautifier.
This way as soon as the header syncronization mechanism in perf's build
system detects a change in a copy of a kernel ABI header and that file
is syncronized, we get 'perf trace' updated automagically.
So, when we syncronize this:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h'
We'll get these:
#define MADV_WIPEONFORK 18 /* Zero memory on fork, child only */
#define MADV_KEEPONFORK 19 /* Undo MADV_WIPEONFORK */
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dolb0ghds4ui7wc1npgkchvc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
