Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next:
1) Add support to specify a stateful expression in set definitions,
this allows users to specify e.g. counters per set elements.
2) Flowtable software counter support.
3) Flowtable hardware offload counter support, from wenxu.
3) Parallelize flowtable hardware offload requests, from Paul Blakey.
This includes a patch to add one work entry per offload command.
4) Several patches to rework nf_queue refcount handling, from Florian
Westphal.
4) A few fixes for the flowtable tunnel offload: Fix crash if tunneling
information is missing and set up indirect flow block as TC_SETUP_FT,
patch from wenxu.
5) Stricter netlink attribute sanity check on filters, from Romain Bellan
and Florent Fourcot.
5) Annotations to make sparse happy, from Jules Irenge.
6) Improve icmp errors in debugging information, from Haishuang Yan.
7) Fix warning in IPVS icmp error debugging, from Haishuang Yan.
8) Fix endianess issue in tcp extension header, from Sergey Marinkevich.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Devices capable of offloading the kernel's datapath and perform
functions such as bridging and routing must also be able to send (trap)
specific packets to the kernel (i.e., the CPU) for processing.
For example, a device acting as a multicast-aware bridge must be able to
trap IGMP membership reports to the kernel for processing by the bridge
module.
In most cases, the underlying device is capable of handling packet rates
that are several orders of magnitude higher compared to those that can
be handled by the CPU.
Therefore, in order to prevent the underlying device from overwhelming
the CPU, devices usually include packet trap policers that are able to
police the trapped packets to rates that can be handled by the CPU.
This patch allows capable device drivers to register their supported
packet trap policers with devlink. User space can then tune the
parameters of these policer (currently, rate and burst size) and read
from the device the number of packets that were dropped by the policer,
if supported.
Subsequent patches in the series will allow device drivers to create
default binding between these policers and packet trap groups and allow
user space to change the binding.
v2:
* Add 'strict_start_type' in devlink policy
* Have device drivers provide max/min rate/burst size for each policer.
Use them to check validity of user provided parameters
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add new operation (LINK_UPDATE), which allows to replace active bpf_prog from
under given bpf_link. Currently this is only supported for bpf_cgroup_link,
but will be extended to other kinds of bpf_links in follow-up patches.
For bpf_cgroup_link, implemented functionality matches existing semantics for
direct bpf_prog attachment (including BPF_F_REPLACE flag). User can either
unconditionally set new bpf_prog regardless of which bpf_prog is currently
active under given bpf_link, or, optionally, can specify expected active
bpf_prog. If active bpf_prog doesn't match expected one, no changes are
performed, old bpf_link stays intact and attached, operation returns
a failure.
cgroup_bpf_replace() operation is resolving race between auto-detachment and
bpf_prog update in the same fashion as it's done for bpf_link detachment,
except in this case update has no way of succeeding because of target cgroup
marked as dying. So in this case error is returned.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200330030001.2312810-3-andriin@fb.com
Implement new sub-command to attach cgroup BPF programs and return FD-based
bpf_link back on success. bpf_link, once attached to cgroup, cannot be
replaced, except by owner having its FD. Cgroup bpf_link supports only
BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI
attachments can be freely intermixed.
To prevent bpf_cgroup_link from keeping cgroup alive past the point when no
BPF program can be executed, implement auto-detachment of link. When
cgroup_bpf_release() is called, all attached bpf_links are forced to release
cgroup refcounts, but they leave bpf_link otherwise active and allocated, as
well as still owning underlying bpf_prog. This is because user-space might
still have FDs open and active, so bpf_link as a user-referenced object can't
be freed yet. Once last active FD is closed, bpf_link will be freed and
underlying bpf_prog refcount will be dropped. But cgroup refcount won't be
touched, because cgroup is released already.
The inherent race between bpf_cgroup_link release (from closing last FD) and
cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So
the only additional check required is when bpf_cgroup_link attempts to detach
itself from cgroup. At that time we need to check whether there is still
cgroup associated with that link. And if not, exit with success, because
bpf_cgroup_link was already successfully detached.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel side changes:
- A couple of x86/cpu cleanups and changes were grandfathered in due
to patch dependencies. These clean up the set of CPU model/family
matching macros with a consistent namespace and C99 initializer
style.
- A bunch of updates to various low level PMU drivers:
* AMD Family 19h L3 uncore PMU
* Intel Tiger Lake uncore support
* misc fixes to LBR TOS sampling
- optprobe fixes
- perf/cgroup: optimize cgroup event sched-in processing
- misc cleanups and fixes
Tooling side changes are to:
- perf {annotate,expr,record,report,stat,test}
- perl scripting
- libapi, libperf and libtraceevent
- vendor events on Intel and S390, ARM cs-etm
- Intel PT updates
- Documentation changes and updates to core facilities
- misc cleanups, fixes and other enhancements"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (89 commits)
cpufreq/intel_pstate: Fix wrong macro conversion
x86/cpu: Cleanup the now unused CPU match macros
hwrng: via_rng: Convert to new X86 CPU match macros
crypto: Convert to new CPU match macros
ASoC: Intel: Convert to new X86 CPU match macros
powercap/intel_rapl: Convert to new X86 CPU match macros
PCI: intel-mid: Convert to new X86 CPU match macros
mmc: sdhci-acpi: Convert to new X86 CPU match macros
intel_idle: Convert to new X86 CPU match macros
extcon: axp288: Convert to new X86 CPU match macros
thermal: Convert to new X86 CPU match macros
hwmon: Convert to new X86 CPU match macros
platform/x86: Convert to new CPU match macros
EDAC: Convert to new X86 CPU match macros
cpufreq: Convert to new X86 CPU match macros
ACPI: Convert to new X86 CPU match macros
x86/platform: Convert to new CPU match macros
x86/kernel: Convert to new CPU match macros
x86/kvm: Convert to new CPU match macros
x86/perf/events: Convert to new CPU match macros
...
Here are the big set of USB and PHY driver patches for 5.7-rc1.
Nothing huge here, some new PHY drivers, loads of USB gadget fixes and
updates, xhci updates, usb-serial driver updates and new device ids, and
other minor things. Full details in the shortlog.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXoHL9w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymz6wCcDwDTZouXj+0B37q+kwlCQQPyLukAn2CxKfrM
d+wScRHWoZutA8IdzqaU
=5+jn
-----END PGP SIGNATURE-----
Merge tag 'usb-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / PHY updates from Greg KH:
"Here are the big set of USB and PHY driver patches for 5.7-rc1.
Nothing huge here, some new PHY drivers, loads of USB gadget fixes and
updates, xhci updates, usb-serial driver updates and new device ids,
and other minor things. Full details in the shortlog.
All have been in linux-next for a while with no reported issues"
* tag 'usb-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (239 commits)
USB: cdc-acm: restore capability check order
usb: cdns3: make signed 1 bit bitfields unsigned
usb: gadget: fsl: remove unused variable 'driver_desc'
usb: gadget: f_fs: Fix use after free issue as part of queue failure
usb: typec: Correct the documentation for typec_cable_put()
USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callback
USB: serial: option: add Wistron Neweb D19Q1
USB: serial: option: add BroadMobi BM806U
USB: serial: option: add support for ASKEY WWHC050
usb: core: Add ACPI support for USB interface devices
driver core: platform: Reimplement devm_platform_ioremap_resource
usb: dwc2: convert to devm_platform_get_and_ioremap_resource
usb: host: hisilicon: convert to devm_platform_get_and_ioremap_resource
usb: host: xhci-plat: convert to devm_platform_get_and_ioremap_resource
drivers: provide devm_platform_get_and_ioremap_resource()
phy: qcom-qusb2: Add new overriding tuning parameters in QUSB2 V2 PHY
phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 V2 PHY
dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning parameters
phy: qcom-qusb2: Add generic QUSB2 V2 PHY support
dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and SC7180
...
Add support for TPROXY via a new bpf helper, bpf_sk_assign().
This helper requires the BPF program to discover the socket via a call
to bpf_sk*_lookup_*(), then pass this socket to the new helper. The
helper takes its own reference to the socket in addition to any existing
reference that may or may not currently be obtained for the duration of
BPF processing. For the destination socket to receive the traffic, the
traffic must be routed towards that socket via local route. The
simplest example route is below, but in practice you may want to route
traffic more narrowly (eg by CIDR):
$ ip route add local default dev lo
This patch avoids trying to introduce an extra bit into the skb->sk, as
that would require more invasive changes to all code interacting with
the socket to ensure that the bit is handled correctly, such as all
error-handling cases along the path from the helper in BPF through to
the orphan path in the input. Instead, we opt to use the destructor
variable to switch on the prefetch of the socket.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200329225342.16317-2-joe@wand.net.nz
-----BEGIN PGP SIGNATURE-----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=Ve8R
-----END PGP SIGNATURE-----
Merge tag 'media/v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New sensor driver: imx219
- Support for some new pixelformats
- Support for Sun8i SoC
- Added more codecs to meson vdec driver
- Prepare for removing the legacy usbvision driver by moving it to
staging. This driver has issues and use legacy core APIs. If nobody
steps up to address those, it is time for its retirement.
- Several cleanups and improvements on drivers, with the addition of
new supported boards
* tag 'media/v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (236 commits)
media: venus: firmware: Ignore secure call error on first resume
media: mtk-vpu: load vpu firmware from the new location
media: i2c: video-i2c: fix build errors due to 'imply hwmon'
media: MAINTAINERS: add myself to co-maintain Hantro G1/G2 for i.MX8MQ
media: hantro: add initial i.MX8MQ support
media: dt-bindings: Document i.MX8MQ VPU bindings
media: vivid: fix incorrect PA assignment to HDMI outputs
media: hantro: Add linux-rockchip mailing list to MAINTAINERS
media: cedrus: h264: Fix 4K decoding on H6
media: siano: Use scnprintf() for avoiding potential buffer overflow
media: rc: Use scnprintf() for avoiding potential buffer overflow
media: allegro: create new struct for channel parameters
media: allegro: move mail definitions to separate file
media: allegro: pass buffers through firmware
media: allegro: verify source and destination buffer in VCU response
media: allegro: handle dependency of bitrate and bitrate_peak
media: allegro: read bitrate mode directly from control
media: allegro: make QP configurable
media: allegro: make frame rate configurable
media: allegro: skip filler data if possible
...
- allow TSYNC and USER_NOTIF together (Tycho Andersen)
- Add missing compat_ioctl for notify (Sven Schnelle)
-----BEGIN PGP SIGNATURE-----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=Ejyd
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
"A couple of seccomp updates. They're both mostly bug fixes that I
wanted to have sit in linux-next for a while:
- allow TSYNC and USER_NOTIF together (Tycho Andersen)
- add missing compat_ioctl for notify (Sven Schnelle)"
* tag 'seccomp-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: Add missing compat_ioctl for notify
seccomp: allow TSYNC and USER_NOTIF together
-----BEGIN PGP SIGNATURE-----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=bYLJ
-----END PGP SIGNATURE-----
Merge tag 'for-5.7/io_uring-2020-03-29' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
"Here are the io_uring changes for this merge window. Light on new
features this time around (just splice + buffer selection), lots of
cleanups, fixes, and improvements to existing support. In particular,
this contains:
- Cleanup fixed file update handling for stack fallback (Hillf)
- Re-work of how pollable async IO is handled, we no longer require
thread offload to handle that. Instead we rely using poll to drive
this, with task_work execution.
- In conjunction with the above, allow expendable buffer selection,
so that poll+recv (for example) no longer has to be a split
operation.
- Make sure we honor RLIMIT_FSIZE for buffered writes
- Add support for splice (Pavel)
- Linked work inheritance fixes and optimizations (Pavel)
- Async work fixes and cleanups (Pavel)
- Improve io-wq locking (Pavel)
- Hashed link write improvements (Pavel)
- SETUP_IOPOLL|SETUP_SQPOLL improvements (Xiaoguang)"
* tag 'for-5.7/io_uring-2020-03-29' of git://git.kernel.dk/linux-block: (54 commits)
io_uring: cleanup io_alloc_async_ctx()
io_uring: fix missing 'return' in comment
io-wq: handle hashed writes in chains
io-uring: drop 'free_pfile' in struct io_file_put
io-uring: drop completion when removing file
io_uring: Fix ->data corruption on re-enqueue
io-wq: close cancel gap for hashed linked work
io_uring: make spdxcheck.py happy
io_uring: honor original task RLIMIT_FSIZE
io-wq: hash dependent work
io-wq: split hashing and enqueueing
io-wq: don't resched if there is no work
io-wq: remove duplicated cancel code
io_uring: fix truncated async read/readv and write/writev retry
io_uring: dual license io_uring.h uapi header
io_uring: io_uring_enter(2) don't poll while SETUP_IOPOLL|SETUP_SQPOLL enabled
io_uring: Fix unused function warnings
io_uring: add end-of-bits marker and build time verify it
io_uring: provide means of removing buffers
io_uring: add IOSQE_BUFFER_SELECT support for IORING_OP_RECVMSG
...
On low memory system, run time dumps can consume too much memory. Add
administrator ability to disable auto dumps per reporter as part of the
error flow handle routine.
This attribute is not relevant while executing
DEVLINK_CMD_HEALTH_REPORTER_DUMP_GET.
By default, auto dump is activated for any reporter that has a dump method,
as part of the reporter registration to devlink.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It may be up to the driver (in case ANY HW stats is passed) to select
which type of HW stats he is going to use. Add an infrastructure to
expose this information to user.
$ tc filter add dev enp3s0np1 ingress proto ip handle 1 pref 1 flower dst_ip 192.168.1.1 action drop
$ tc -s filter show dev enp3s0np1 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
dst_ip 192.168.1.1
in_hw in_hw_count 2
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1 installed 10 sec used 10 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
used_hw_stats immediate <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement TSINFO_GET request to get timestamping information for a network
device. This is traditionally available via ETHTOOL_GET_TS_INFO ioctl
request.
Move part of ethtool_get_ts_info() into common.c so that ioctl and netlink
code use the same logic to get timestamping information from the device.
v3: use "TSINFO" rather than "TIMESTAMP", suggested by Richard Cochran
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add three string sets related to timestamping information:
ETH_SS_SOF_TIMESTAMPING: SOF_TIMESTAMPING_* flags
ETH_SS_TS_TX_TYPES: timestamping Tx types
ETH_SS_TS_RX_FILTERS: timestamping Rx filters
These will be used for TIMESTAMP_GET request.
v2: avoid compiler warning ("enumeration value not handled in switch")
in net_hwtstamp_validate()
v3: omit dash in Tx type names ("one-step-*" -> "onestep-*"), suggested by
Richard Cochran
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Send ETHTOOL_MSG_EEE_NTF notification whenever EEE settings of a network
device are modified using ETHTOOL_MSG_EEE_SET netlink message or
ETHTOOL_SEEE ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement EEE_SET netlink request to set EEE settings of a network device.
These are traditionally set with ETHTOOL_SEEE ioctl request.
The netlink interface allows setting the EEE status for all link modes
supported by kernel but only first 32 link modes can be set at the moment
as only those are supported by the ethtool_ops callback.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement EEE_GET request to get EEE settings of a network device. These
are traditionally available via ETHTOOL_GEEE ioctl request.
The netlink interface allows reporting EEE status for all link modes
supported by kernel but only first 32 link modes are provided at the moment
as only those are reported by the ethtool_ops callback and drivers.
v2: fix alignment (whitespace only)
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Send ETHTOOL_MSG_PAUSE_NTF notification whenever pause parameters of
a network device are modified using ETHTOOL_MSG_PAUSE_SET netlink message
or ETHTOOL_SPAUSEPARAM ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement PAUSE_SET netlink request to set pause parameters of a network
device. Thease are traditionally set with ETHTOOL_SPAUSEPARAM ioctl
request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement PAUSE_GET request to get pause parameters of a network device.
These are traditionally available via ETHTOOL_GPAUSEPARAM ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Send ETHTOOL_MSG_COALESCE_NTF notification whenever coalescing parameters
of a network device are modified using ETHTOOL_MSG_COALESCE_SET netlink
message or ETHTOOL_SCOALESCE ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement COALESCE_SET netlink request to set coalescing parameters of
a network device. These are traditionally set with ETHTOOL_SCOALESCE ioctl
request. This commit adds only support for device coalescing parameters,
not per queue coalescing parameters.
Like the ioctl implementation, the generic ethtool code checks if only
supported parameters are modified; if not, first offending attribute is
reported using extack.
v2: fix alignment (whitespace only)
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement COALESCE_GET request to get coalescing parameters of a network
device. These are traditionally available via ETHTOOL_GCOALESCE ioctl
request. This commit adds only support for device coalescing parameters,
not per queue coalescing parameters.
Omit attributes with zero values unless they are declared as supported
(i.e. the corresponding bit in ethtool_ops::supported_coalesce_params is
set).
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds functionality to configure routes for RPL source routing
functionality. There is no IPIP functionality yet implemented which can
be added later when the cases when to use IPv6 encapuslation comes more
clear.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds rpl source routing receive handling. Everything works
only if sysconf "rpl_seg_enabled" and source routing is enabled. Mostly
the same behaviour as IPv6 segmentation routing. To handle compression
and uncompression a rpl.c file is created which contains the necessary
functionality. The receive handling will also care about IPv6
encapsulated so far it's specified as possible nexthdr in RFC 6554.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a uapi header for rpl struct definition. The segments
data can be accessed over rpl_segaddr or rpl_segdata macros. In case of
compri and compre is zero the segment data is not compressed and can be
accessed by rpl_segaddr. In the other case the compressed data can be
accessed by rpl_segdata and interpreted as byte array.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Expose a new netlink family to userspace to control the PM, setting:
- list of local addresses to be signalled.
- list of local addresses used to created subflows.
- maximum number of add_addr option to react
When the msk is fully established, the PM netlink attempts to
announce the 'signal' list via the ADD_ADDR option. Since we
currently lack the ADD_ADDR echo (and related event) only the
first addr is sent.
After exhausting the 'announce' list, the PM tries to create
subflow for each addr in 'local' list, waiting for each
connection to be completed before attempting the next one.
Idea is to add an additional PM hook for ADD_ADDR echo, to allow
the PM netlink announcing multiple addresses, in sequence.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
add ulp-specific diagnostic functions, so that subflow information can be
dumped to userspace programs like 'ss'.
v2 -> v3:
- uapi: use bit macros appropriate for userspace
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds new netlink attribute to allow a user to (optionally)
specify the desired offload mode immediately upon MACSec link creation.
Separate iproute patch will be required to support this from user space.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce types and configs for bpf programs that can be attached to
LSM hooks. The programs can be enabled by the config option
CONFIG_BPF_LSM.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Florent Revest <revest@google.com>
Reviewed-by: Thomas Garnier <thgarnie@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Link: https://lore.kernel.org/bpf/20200329004356.27286-2-kpsingh@chromium.org
This implements synchronized time-travel mode which - using a special
application on a unix socket - lets multiple machines take part in a
time-travelling simulation together.
The protocol for the unix domain socket is defined in the new file
include/uapi/linux/um_timetravel.h.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
While it is currently possible for userspace to specify that an existing
XDP program should not be replaced when attaching to an interface, there is
no mechanism to safely replace a specific XDP program with another.
This patch adds a new netlink attribute, IFLA_XDP_EXPECTED_FD, which can be
set along with IFLA_XDP_FD. If set, the kernel will check that the program
currently loaded on the interface matches the expected one, and fail the
operation if it does not. This corresponds to a 'cmpxchg' memory operation.
Setting the new attribute with a negative value means that no program is
expected to be attached, which corresponds to setting the UPDATE_IF_NOEXIST
flag.
A new companion flag, XDP_FLAGS_REPLACE, is also added to explicitly
request checking of the EXPECTED_FD attribute. This is needed for userspace
to discover whether the kernel supports the new attribute.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/158515700640.92963.3551295145441017022.stgit@toke.dk
Enable the bpf_get_current_cgroup_id() helper for connect(), sendmsg(),
recvmsg() and bind-related hooks in order to retrieve the cgroup v2
context which can then be used as part of the key for BPF map lookups,
for example. Given these hooks operate in process context 'current' is
always valid and pointing to the app that is performing mentioned
syscalls if it's subject to a v2 cgroup. Also with same motivation of
commit 7723628101 ("bpf: Introduce bpf_skb_ancestor_cgroup_id helper")
enable retrieval of ancestor from current so the cgroup id can be used
for policy lookups which can then forbid connect() / bind(), for example.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/d2a7ef42530ad299e3cbb245e6c12374b72145ef.1585323121.git.daniel@iogearbox.net
In Cilium we're mainly using BPF cgroup hooks today in order to implement
kube-proxy free Kubernetes service translation for ClusterIP, NodePort (*),
ExternalIP, and LoadBalancer as well as HostPort mapping [0] for all traffic
between Cilium managed nodes. While this works in its current shape and avoids
packet-level NAT for inter Cilium managed node traffic, there is one major
limitation we're facing today, that is, lack of netns awareness.
In Kubernetes, the concept of Pods (which hold one or multiple containers)
has been built around network namespaces, so while we can use the global scope
of attaching to root BPF cgroup hooks also to our advantage (e.g. for exposing
NodePort ports on loopback addresses), we also have the need to differentiate
between initial network namespaces and non-initial one. For example, ExternalIP
services mandate that non-local service IPs are not to be translated from the
host (initial) network namespace as one example. Right now, we have an ugly
work-around in place where non-local service IPs for ExternalIP services are
not xlated from connect() and friends BPF hooks but instead via less efficient
packet-level NAT on the veth tc ingress hook for Pod traffic.
On top of determining whether we're in initial or non-initial network namespace
we also have a need for a socket-cookie like mechanism for network namespaces
scope. Socket cookies have the nice property that they can be combined as part
of the key structure e.g. for BPF LRU maps without having to worry that the
cookie could be recycled. We are planning to use this for our sessionAffinity
implementation for services. Therefore, add a new bpf_get_netns_cookie() helper
which would resolve both use cases at once: bpf_get_netns_cookie(NULL) would
provide the cookie for the initial network namespace while passing the context
instead of NULL would provide the cookie from the application's network namespace.
We're using a hole, so no size increase; the assignment happens only once.
Therefore this allows for a comparison on initial namespace as well as regular
cookie usage as we have today with socket cookies. We could later on enable
this helper for other program types as well as we would see need.
(*) Both externalTrafficPolicy={Local|Cluster} types
[0] https://github.com/cilium/cilium/blob/master/bpf/bpf_sock.c
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/c47d2346982693a9cf9da0e12690453aded4c788.1585323121.git.daniel@iogearbox.net
Leon Romanovsky says:
====================
Those two patches from Michael extends mlx5_core and mlx5_ib flow steering
to support RDMA TX in similar way to already supported RDMA RX.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Due to dependencies
* branch 'mlx5_tx_steering':
RDMA/mlx5: Add support for RDMA TX flow table
net/mlx5: Add support for RDMA TX steering
Enable user application to add rules for RDMA TX steering table.
Rules in this steering table will allow to steer transmitted RDMA
traffic.
Link: https://lore.kernel.org/r/20200324061425.1570190-3-leon@kernel.org
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move to fully dynamic UAR mode once user space supports it. In this case
we prevent any legacy mode of UARs on the allocated context and prevent
redundant allocation of the static ones.
Link: https://lore.kernel.org/r/20200324060143.1569116-6-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Extend QP creation to get uar page index from user space, this mode can be
used with the UAR dynamic mode APIs to allocate/destroy a UAR object.
As part of enabling this option blocked the weird/un-supported cross
channel option which uses index 0 hard-coded.
This QP flag wasn't exposed to user space as part of any formal upstream
release, the dynamic option can allow having valid UAR page index instead.
Link: https://lore.kernel.org/r/20200324060143.1569116-4-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Extend CQ creation to get uar page index from user space, this mode can be
used with the UAR dynamic mode APIs to allocate/destroy a UAR object.
Link: https://lore.kernel.org/r/20200324060143.1569116-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Expose UAR object and its alloc/destroy commands to be used over the ioctl
interface by user space applications.
This API supports both BF & NC modes and enables a dynamic allocation of
UARs once really needed.
As the number of driver objects were limited by the core ones when the
merged tree is prepared, had to decrease the number of core objects to
enable the new UAR object usage.
Link: https://lore.kernel.org/r/20200324060143.1569116-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The PERF_SAMPLE_CGROUP bit is to save (perf_event) cgroup information in
the sample. It will add a 64-bit id to identify current cgroup and it's
the file handle in the cgroup file system. Userspace should use this
information with PERF_RECORD_CGROUP event to match which cgroup it
belongs.
I put it before PERF_SAMPLE_AUX for simplicity since it just needs a
64-bit word. But if we want bigger samples, I can work on that
direction too.
Committer testing:
$ pahole perf_sample_data | grep -w cgroup -B5 -A5
/* --- cacheline 4 boundary (256 bytes) was 56 bytes ago --- */
struct perf_regs regs_intr; /* 312 16 */
/* --- cacheline 5 boundary (320 bytes) was 8 bytes ago --- */
u64 stack_user_size; /* 328 8 */
u64 phys_addr; /* 336 8 */
u64 cgroup; /* 344 8 */
/* size: 384, cachelines: 6, members: 22 */
/* padding: 32 */
};
$
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lore.kernel.org/lkml/20200325124536.2800725-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To support cgroup tracking, add CGROUP event to save a link between
cgroup path and id number. This is needed since cgroups can go away
when userspace tries to read the cgroup info (from the id) later.
The attr.cgroup bit was also added to enable cgroup tracking from
userspace.
This event will be generated when a new cgroup becomes active.
Userspace might need to synthesize those events for existing cgroups.
Committer testing:
From the resulting kernel, using /sys/kernel/btf/vmlinux:
$ pahole perf_event_attr | grep -w cgroup -B5 -A1
__u64 write_backward:1; /* 40:27 8 */
__u64 namespaces:1; /* 40:28 8 */
__u64 ksymbol:1; /* 40:29 8 */
__u64 bpf_event:1; /* 40:30 8 */
__u64 aux_output:1; /* 40:31 8 */
__u64 cgroup:1; /* 40:32 8 */
__u64 __reserved_1:31; /* 40:33 8 */
$
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
[staticize perf_event_cgroup function]
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lore.kernel.org/lkml/20200325124536.2800725-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We copied the virtio_iommu_config from the virtio-iommu specification,
which declares the fields using little-endian annotations (for example
le32). Unfortunately this causes sparse to warn about comparison between
little- and cpu-endian, because of the typecheck() in virtio_cread():
drivers/iommu/virtio-iommu.c:1024:9: sparse: sparse: incompatible types in comparison expression (different base types):
drivers/iommu/virtio-iommu.c:1024:9: sparse: restricted __le64 *
drivers/iommu/virtio-iommu.c:1024:9: sparse: unsigned long long *
drivers/iommu/virtio-iommu.c:1036:9: sparse: sparse: incompatible types in comparison expression (different base types):
drivers/iommu/virtio-iommu.c:1036:9: sparse: restricted __le64 *
drivers/iommu/virtio-iommu.c:1036:9: sparse: unsigned long long *
drivers/iommu/virtio-iommu.c:1040:9: sparse: sparse: incompatible types in comparison expression (different base types):
drivers/iommu/virtio-iommu.c:1040:9: sparse: restricted __le64 *
drivers/iommu/virtio-iommu.c:1040:9: sparse: unsigned long long *
drivers/iommu/virtio-iommu.c:1044:9: sparse: sparse: incompatible types in comparison expression (different base types):
drivers/iommu/virtio-iommu.c:1044:9: sparse: restricted __le32 *
drivers/iommu/virtio-iommu.c:1044:9: sparse: unsigned int *
drivers/iommu/virtio-iommu.c:1048:9: sparse: sparse: incompatible types in comparison expression (different base types):
drivers/iommu/virtio-iommu.c:1048:9: sparse: restricted __le32 *
drivers/iommu/virtio-iommu.c:1048:9: sparse: unsigned int *
drivers/iommu/virtio-iommu.c:1052:9: sparse: sparse: incompatible types in comparison expression (different base types):
drivers/iommu/virtio-iommu.c:1052:9: sparse: restricted __le32 *
drivers/iommu/virtio-iommu.c:1052:9: sparse: unsigned int *
Although virtio_cread() does convert virtio-endian (in our case
little-endian) to cpu-endian, the typecheck() needs the two arguments to
have the same endianness. Do as UAPI headers of other virtio devices do,
and remove the endian annotation from the device config.
Even though we change the UAPI this shouldn't cause any regression since
QEMU, the existing implementation of virtio-iommu that uses this header,
already removes the annotations when importing headers.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20200326093558.2641019-2-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pull input fixes from Dmitry Torokhov:
- a fix to generate proper timestamps on key autorepeat events that
were broken recently
- a fix for Synaptics driver to only activate reduced reporting mode
when explicitly requested
- a new keycode for "selective screenshot" function
- other assorted fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: fix stale timestamp on key autorepeat events
Input: move the new KEY_SELECTIVE_SCREENSHOT keycode
Input: avoid BIT() macro usage in the serio.h UAPI header
Input: synaptics-rmi4 - set reduced reporting mode only when requested
Input: synaptics - enable RMI on HP Envy 13-ad105ng
Input: allocate keycode for "Selective Screenshot" key
Input: tm2-touchkey - add support for Coreriver TC360 variant
dt-bindings: input: add Coreriver TC360 binding
dt-bindings: vendor-prefixes: Add Coreriver vendor prefix
Input: raydium_i2c_ts - fix error codes in raydium_i2c_boot_trigger()
This patch adds a new MACsec offloading option, MACSEC_OFFLOAD_MAC,
allowing a user to select a MAC as a provider for MACsec offloading
operations.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
BIT() macro definition is internal to the Linux kernel and is not
to be used in UAPI headers; replace its usage with the _BITUL() macro
that is already used elsewhere in the header.
Fixes: 9c66d15646 ("taprio: Add support for hardware offloading")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
BIT() macro is not defined in UAPI headers; there is, however, similarly
defined _BITUL() macro present in include/uapi/linux/const.h; use it
instead and include <linux/const.h> and <linux/ioctl.h> in order to make
the definitions provided in the header useful.
Fixes: 3431ca4837 ("rtc: define RTC_VL_READ values")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Link: https://lore.kernel.org/r/20200324041209.GA30727@asgard.redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
We should try to keep keycodes sequential unless there is a reason to leave
a gap in numbering, so let's move it from 0x280 to 0x27a while we still
can.
Fixes: 3b059da983 ("Input: allocate keycode for Selective Screenshot key")
Acked-by: Rajat Jain <rajatja@google.com>
Link: https://lore.kernel.org/r/20200326182711.GA259753@dtor-ws
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The BIT() macro definition is not available for the UAPI headers
(moreover, it can be defined differently in the user space); replace
its usage with the _BITUL() macro that is defined in <linux/const.h>.
Fixes: 237483aa5c ("coresight: stm: adding driver for CoreSight STM component")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200324042213.GA10452@asgard.redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At present, on Power systems with Protected Execution Facility
hardware and an ultravisor, a KVM guest can transition to being a
secure guest at will. Userspace (QEMU) has no way of knowing
whether a host system is capable of running secure guests. This
will present a problem in future when the ultravisor is capable of
migrating secure guests from one host to another, because
virtualization management software will have no way to ensure that
secure guests only run in domains where all of the hosts can
support secure guests.
This adds a VM capability which has two functions: (a) userspace
can query it to find out whether the host can support secure guests,
and (b) userspace can enable it for a guest, which allows that
guest to become a secure guest. If userspace does not enable it,
KVM will return an error when the ultravisor does the hypercall
that indicates that the guest is starting to transition to a
secure guest. The ultravisor will then abort the transition and
the guest will terminate.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Report event FAN_DIR_MODIFY with name in a variable length record similar
to how fid's are reported. With name info reporting implemented, setting
FAN_DIR_MODIFY in mark mask is now allowed.
When events are reported with name, the reported fid identifies the
directory and the name follows the fid. The info record type for this
event info is FAN_EVENT_INFO_TYPE_DFID_NAME.
For now, all reported events have at most one info record which is
either FAN_EVENT_INFO_TYPE_FID or FAN_EVENT_INFO_TYPE_DFID_NAME (for
FAN_DIR_MODIFY). Later on, events "on child" will report both records.
There are several ways that an application can use this information:
1. When watching a single directory, the name is always relative to
the watched directory, so application need to fstatat(2) the name
relative to the watched directory.
2. When watching a set of directories, the application could keep a map
of dirfd for all watched directories and hash the map by fid obtained
with name_to_handle_at(2). When getting a name event, the fid in the
event info could be used to lookup the base dirfd in the map and then
call fstatat(2) with that dirfd.
3. When watching a filesystem (FAN_MARK_FILESYSTEM) or a large set of
directories, the application could use open_by_handle_at(2) with the fid
in event info to obtain dirfd for the directory where event happened and
call fstatat(2) with this dirfd.
The last option scales better for a large number of watched directories.
The first two options may be available in the future also for non
privileged fanotify watchers, because open_by_handle_at(2) requires
the CAP_DAC_READ_SEARCH capability.
Link: https://lore.kernel.org/r/20200319151022.31456-15-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Dirent events are going to be supported in two flavors:
1. Directory fid info + mask that includes the specific event types
(e.g. FAN_CREATE) and an optional FAN_ONDIR flag.
2. Directory fid info + name + mask that includes only FAN_DIR_MODIFY.
To request the second event flavor, user needs to set the event type
FAN_DIR_MODIFY in the mark mask.
The first flavor is supported since kernel v5.1 for groups initialized
with flag FAN_REPORT_FID. It is intended to be used for watching
directories in "batch mode" - the watcher is notified when directory is
changed and re-scans the directory content in response. This event
flavor is stored more compactly in the event queue, so it is optimal
for workloads with frequent directory changes.
The second event flavor is intended to be used for watching large
directories, where the cost of re-scan of the directory on every change
is considered too high. The watcher getting the event with the directory
fid and entry name is expected to call fstatat(2) to query the content of
the entry after the change.
Legacy inotify events are reported with name and event mask (e.g. "foo",
FAN_CREATE | FAN_ONDIR). That can lead users to the conclusion that
there is *currently* an entry "foo" that is a sub-directory, when in fact
"foo" may be negative or non-dir by the time user gets the event.
To make it clear that the current state of the named entry is unknown,
when reporting an event with name info, fanotify obfuscates the specific
event types (e.g. create,delete,rename) and uses a common event type -
FAN_DIR_MODIFY to describe the change. This should make it harder for
users to make wrong assumptions and write buggy filesystem monitors.
At this point, name info reporting is not yet implemented, so trying to
set FAN_DIR_MODIFY in mark mask will return -EINVAL.
Link: https://lore.kernel.org/r/20200319151022.31456-12-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Character arrays can be considered empty strings (if they are
immediately terminated), but they cannot be NULL.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The commit 19ba1eb15a ("Input: psmouse - add a custom serio protocol
to send extra information") introduced usage of the BIT() macro
for SERIO_* flags; this macro is not provided in UAPI headers.
Replace if with similarly defined _BITUL() macro defined
in <linux/const.h>.
Fixes: 19ba1eb15a ("Input: psmouse - add a custom serio protocol to send extra information")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Cc: <stable@vger.kernel.org> # v5.0+
Link: https://lore.kernel.org/r/20200324041341.GA32335@asgard.redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The VFIO_DEVICE_FEATURE ioctl is meant to be a general purpose, device
agnostic ioctl for setting, retrieving, and probing device features.
This implementation provides a 16-bit field for specifying a feature
index, where the data porition of the ioctl is determined by the
semantics for the given feature. Additional flag bits indicate the
direction and nature of the operation; SET indicates user data is
provided into the device feature, GET indicates the device feature is
written out into user data. The PROBE flag augments determining
whether the given feature is supported, and if provided, whether the
given operation on the feature is supported.
The first user of this ioctl is for setting the vfio-pci VF token,
where the user provides a shared secret key (UUID) on a SR-IOV PF
device, which users must provide when opening associated VF devices.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200226223125.GA20630@embeddedor
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Commit 53eca1f347 ("net: rename flow_action_hw_stats_types* ->
flow_action_hw_stats*") renamed just the flow action types and
helpers. For consistency rename variables, enums, struct members
and UAPI too (note that this UAPI was not in any official release,
yet).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new param for user-space to determine if kernel module is SM5
capable.
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Reviewed-by: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Surface define v4 added new member buffer_byte_stride. With this patch
add buffer_byte_stride in surface metadata and create surface using new
command if support is available.
Also with this patch replace device specific data types with kernel
types.
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Reviewed-by: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
This functionality was deprecated in kernel 5.4. Since no one has
complained of the impending removal it's time we did so.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
This ioctl will be responsible for deleting a subvolume using its id.
This can be used when a system has a file system mounted from a
subvolume, rather than the root file system, like below:
/
@subvol1/
@subvol2/
@subvol_default/
If only @subvol_default is mounted, we have no path to reach @subvol1
and @subvol2, thus no way to delete them. Current subvolume delete ioctl
takes a file handle point as argument, and if @subvol_default is
mounted, we can't reach @subvol1 and @subvol2 from the same mount point.
This patch introduces a new ioctl BTRFS_IOC_SNAP_DESTROY_V2 that takes
the extended structure with flags to allow to delete subvolume using
subvolid.
Now, we can use this new ioctl specifying the subvolume id and refer to
the same mount point. It doesn't matter which subvolume was mounted,
since we can reach to the desired one using the subvolume id, and then
delete it.
The full path to the subvolume id is resolved internally and access is
verified as if the subvolume was accessed by path.
The volume args v2 structure is extended to use the existing union for
subvolume id specification, that's valid in case the
BTRFS_SUBVOL_SPEC_BY_ID is set.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
The ioctl data for devices or subvolumes can be passed via
btrfs_ioctl_vol_args or btrfs_ioctl_vol_args_v2. The latter is more
versatile and needs some caution as some of the flags make sense only
for some ioctls.
As we're going to extend the flags, define support masks for each ioctl
class separately.
Reviewed-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The feature VIRTIO_NET_F_HASH_REPORT extends the
layout of the packet and requests the device to
calculate hash on incoming packets and report it
in the packet header.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Link: https://lore.kernel.org/r/20200302115003.14877-4-yuri.benditovich@daynix.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
RSS (Receive-side scaling) defines hash calculation
rules and decision on receive virtqueue according to
the calculated hash, provided mask to apply and
provided indirection table containing indices of
receive virqueues. The driver sends the control
command to enable multiqueue and provide parameters
for receive steering.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Link: https://lore.kernel.org/r/20200302115003.14877-3-yuri.benditovich@daynix.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO_NET_F_RSC_EXT feature bit indicates that the device
is able to provide extended RSC information. When the feature
is negotiatede and 'gso_type' field in received packet is not
GSO_NONE, the device reports number of coalesced packets in
'csum_start' field and number of duplicated acks in 'csum_offset'
field and sets VIRTIO_NET_HDR_F_RSC_INFO in 'flags' field.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Link: https://lore.kernel.org/r/20200302115003.14877-2-yuri.benditovich@daynix.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* HE ranging (fine timing measurement) API support
* hwsim gets virtio support, for use with wmediumd,
to be able to simulate with multiple machines
* eapol-over-nl80211 improvements to exclude preauth
* IBSS reset support, to recover connections from
userspace
* and various others.
-----BEGIN PGP SIGNATURE-----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=t3QF
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2020-03-20' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Another set of changes:
* HE ranging (fine timing measurement) API support
* hwsim gets virtio support, for use with wmediumd,
to be able to simulate with multiple machines
* eapol-over-nl80211 improvements to exclude preauth
* IBSS reset support, to recover connections from
userspace
* and various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we have a nested tunnel info attribute we can add a separate
one for the tunnel command and require it explicitly from user-space. It
must be one of RTM_SETLINK/DELLINK. Only RTM_SETLINK requires a valid
tunnel id, DELLINK just removes it if it was set before. This allows us
to have all tunnel attributes and control in one place, thus removing
the need for an outside vlan info flag.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While discussing the new API, Roopa mentioned that we'll be adding more
tunnel attributes and options in the future, so it's better to make it a
nested attribute, since this is still in net-next we can easily change it
and nest the tunnel id attribute under BRIDGE_VLANDB_ENTRY_TUNNEL_INFO.
The new format is:
[BRIDGE_VLANDB_ENTRY]
[BRIDGE_VLANDB_ENTRY_TUNNEL_INFO]
[BRIDGE_VLANDB_TINFO_ID]
Any new tunnel attributes can be nested under
BRIDGE_VLANDB_ENTRY_TUNNEL_INFO.
Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drivers that trigger roaming need to know the lifetime of the configured
PMKSA for deciding whether to trigger the full or PMKSA cache based
authentication. The configured PMKSA is invalid after the PMK lifetime
has expired and must not be used after that and the STA needs to
disassociate if the PMK expires. Hence the STA is expected to refresh
the PMK with a full authentication before this happens (e.g., when
reassociating to a new BSS the next time or by performing EAPOL
reauthentication depending on the AKM) to avoid unnecessary
disconnection.
The PMK reauthentication threshold is the percentage of the PMK lifetime
value and indicates to the driver to trigger a full authentication roam
(without PMKSA caching) after the reauthentication threshold time, but
before the PMK timer has expired. Authentication methods like SAE need
to be able to generate a new PMKSA entry without having to force a
disconnection after this threshold timeout. If no roaming occurs between
the reauthentication threshold time and PMK lifetime expiration,
disassociation is still forced.
The new attributes for providing these values correspond to the dot11
MIB variables dot11RSNAConfigPMKLifetime and
dot11RSNAConfigPMKReauthThreshold.
This type of functionality is already available in cases where user
space component is in control of roaming. This commit extends that same
capability into cases where parts or all of this functionality is
offloaded to the driver.
Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20200312235903.18462-1-jouni@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sometimes, userspace is able to detect that a peer silently lost its
state (like, if the peer reboots). wpa_supplicant does this for IBSS-RSN
by registering for auth/deauth frames, but when it detects this, it is
only able to remove the encryption keys of the peer and close its port.
However, the kernel also hold other state about the station, such as BA
sessions, probe response parameters and the like. They also need to be
resetted correctly.
This patch adds the NL80211_EXT_FEATURE_DEL_IBSS_STA feature flag
indicating the driver accepts deleting stations in IBSS mode, which
should send a deauth and reset the state of the station, just like in
mesh point mode.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Link: https://lore.kernel.org/r/20200305135754.12094-1-cavallar@lri.fr
[preserve -EINVAL return]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add API for telling whether the driver supports protected TWT.
The protected_twt capability in the RSNXE will be based on this.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20200131111300.891737-23-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for requesting that the ranging measurement will use
the trigger-based / non trigger-based flow instead of the EDCA based
flow.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20200131111300.891737-2-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the nl80211 control port is used before this patch, pre-auth frames
(0x88c7) are send to userspace uncoditionally. While this enables userspace
to only use nl80211 on the station side, it is not always useful for APs.
Furthermore, pre-auth frames are ordinary data frames and not related to
the control port. Therefore it should for example be possible for pre-auth
frames to be bridged onto a wired network on AP side without touching
userspace.
For backwards compatibility to code already using pre-auth over nl80211,
this patch adds a feature flag to disable this behavior, while it remains
enabled by default. An additional ext. feature flag is added to detect this
from userspace.
Thanks to Jouni for pointing out, that pre-auth frames should be handled as
ordinary data frames.
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200312091055.54257-2-markus.theil@tu-ilmenau.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This allows communication with external entities.
It also required fixing up the netlink policy, since NLA_UNSPEC
attributes are no longer accepted.
Signed-off-by: Erel Geron <erelx.geron@intel.com>
[port to backports, inline the ID, use 29 as the ID as requested,
drop != NULL checks, reduce ifdefs]
Link: https://lore.kernel.org/r/20200305143212.c6e4c87d225b.I7ce60bf143e863dcdf0fb8040aab7168ba549b99@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The code is called MEDIA_BUS_FMT_Y14_1X14 and behaves just like
MEDIA_BUS_FMT_Y12_1X12 with two more bits.
Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The new format is called V4L2_PIX_FMT_Y14. Like V4L2_PIX_FMT_Y10 and
V4L2_PIX_FMT_Y12 it is stored in two bytes per pixel but has only two
unused bits at the top.
Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add an ioctl FS_IOC_GET_ENCRYPTION_NONCE which retrieves the nonce from
an encrypted file or directory. The nonce is the 16-byte random value
stored in the inode's encryption xattr. It is normally used together
with the master key to derive the inode's actual encryption key.
The nonces are needed by automated tests that verify the correctness of
the ciphertext on-disk. Except for the IV_INO_LBLK_64 case, there's no
way to replicate a file's ciphertext without knowing that file's nonce.
The nonces aren't secret, and the existing ciphertext verification tests
in xfstests retrieve them from disk using debugfs or dump.f2fs. But in
environments that lack these debugging tools, getting the nonces by
manually parsing the filesystem structure would be very hard.
To make this important type of testing much easier, let's just add an
ioctl that retrieves the nonce.
Link: https://lore.kernel.org/r/20200314205052.93294-2-ebiggers@kernel.org
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
This patch adds support for vlan stats to be included when dumping vlan
information. We have to dump them only when explicitly requested (thus the
flag below) because that disables the vlan range compression and will make
the dump significantly larger. In order to request the stats to be
included we add a new dump attribute called BRIDGE_VLANDB_DUMP_FLAGS which
can affect dumps with the following first flag:
- BRIDGE_VLANDB_DUMPF_STATS
The stats are intentionally nested and put into separate attributes to make
it easier for extending later since we plan to add per-vlan mcast stats,
drop stats and possibly STP stats. This is the last missing piece from the
new vlan API which makes the dumped vlan information complete.
A dump request which should include stats looks like:
[BRIDGE_VLANDB_DUMP_FLAGS] |= BRIDGE_VLANDB_DUMPF_STATS
A vlandb entry attribute with stats looks like:
[BRIDGE_VLANDB_ENTRY] = {
[BRIDGE_VLANDB_ENTRY_STATS] = {
[BRIDGE_VLANDB_STATS_RX_BYTES]
[BRIDGE_VLANDB_STATS_RX_PACKETS]
...
}
}
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch allows users to specify the stateful expression for the
elements in this set via NFTA_SET_EXPR. This new feature allows you to
turn on counters for all of the elements in this set.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
On i915 we have a new UAPI to allow userspace to specify CS ring buffer size on
construction (I915_CONTEXT_PARAM_RINGSIZE) and also new sysfs entries exposing
various engine properties
GVT Changes:
VFIO edid getting expanded to all platforms and a big cleanup around attr
group, unused vblank complete, kvmgt, Intel engine and dev_priv usages.
i915 Changes:
- new UAPI to allow userspace to specify CS ring buffer size on construction
(I915_CONTEXT_PARAM_RINGSIZE) - (Chris)
- New sysfs entries exposing various engine properties (Chris)
- Tiger Lake is out of require_force_probe protection (Jose)
- Changes in many places around active requests, reset and heartbeat (Chris)
- Stop assigning drm-dev_private pointer (Jani)
- Many code refactor in many places, including intel_modeset_init,
increasing use of intel_uncore_*, vgpu, and gvt stuff (Jani)
- Fixes around display pipe iterators (Anshuman)
- Tigerlake enabling work (Matt Ropper, Matt Atwood, Ville, Lucas, Daniele,
Jose, Anusha, Vivek, Swathi, Caz. Kai)
- Code clean-up like reducing use of drm/i915_drv.h, removing unused
registers, removing garbage warns, and some other code polishing (Jani, Lucas,
Ville)
- Selftests fixes, improvements and additions (Chris, Dan, Aditya, Matt Auld)
- Fix plane possible_crtcs bit mask (Anshuman)
- Fixes and cleanup on GLK pre production identification and w/a (Ville)
- Fix display orientation on few cases (Hans, Ville)
- dbuf clean-up and improvements for slice arrays handling (Ville)
- Improvement around min cdclk calculation (Stanislav)
- Fixes and refactor around display PLLs (Imre)
- Other execlists and perf fixes (Chris)
- Documentation fixes (Jani, Chris)
- Fix build issue (Anshuman)
- Many more fixes around the locking mechanisms (Chris)
- Other fixes and debugability info around preemption (Chris, Tvrtko)
- Add mechanism to submit a context WA on ring submission (Mika)
- Clear all Eu/L3 resitual context (Prathap)
- More changes around local memory (Abdiel, Matt, Chris)
- Fix RPS (Chris)
- DP MST fix (Lyude)
- Display FBC fixes (Jose, RK)
- debugfs cleanup (Tvrtko)
- More convertion towards drm_debive based loggin (Wambui, Ram)
- Avoid potential buffer overflow (Takashi)
- Ice Lake and Elkhart Lake workarounds (Matt Roper)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAl5sIZ0ACgkQ+mJfZA7r
E8o1LQf+L/Vpm46QQGEyzHINf/gTQvFvumuNAX352vEHaKUgLtTuI7xfpd0c83G1
5VI+L0Q/ARvakkgfZuHYInlxc9azkcPF1wXb3bLqkoiJ15ydwx5GWjVpZ8uFT+fG
xzaHBqhqUcvw/kXI1Cy5kIDAlFO9rKLsoLS2qQF9BsYHyxa52ok9/hW+lM7C+vfR
aYvEr7aAK0o06mqgwc3DHXGuzaS1S9kxtvj9ZkHNsD9iwD4rrEIvW3BPuDqEVkGq
TkKfThhzJp2FDjXkgCQbLm2BQmxBS0aihwNsQ/lDUUAxcFiuRYwMSoT63vPD1OYI
lgG0BuJkwK7csJIMrnOs/ZAMeKyTQA==
=vrB8
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2020-03-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
On i915 we have a new UAPI to allow userspace to specify CS ring buffer size on
construction (I915_CONTEXT_PARAM_RINGSIZE) and also new sysfs entries exposing
various engine properties
GVT Changes:
VFIO edid getting expanded to all platforms and a big cleanup around attr
group, unused vblank complete, kvmgt, Intel engine and dev_priv usages.
i915 Changes:
- new UAPI to allow userspace to specify CS ring buffer size on construction
(I915_CONTEXT_PARAM_RINGSIZE) - (Chris)
- New sysfs entries exposing various engine properties (Chris)
- Tiger Lake is out of require_force_probe protection (Jose)
- Changes in many places around active requests, reset and heartbeat (Chris)
- Stop assigning drm-dev_private pointer (Jani)
- Many code refactor in many places, including intel_modeset_init,
increasing use of intel_uncore_*, vgpu, and gvt stuff (Jani)
- Fixes around display pipe iterators (Anshuman)
- Tigerlake enabling work (Matt Ropper, Matt Atwood, Ville, Lucas, Daniele,
Jose, Anusha, Vivek, Swathi, Caz. Kai)
- Code clean-up like reducing use of drm/i915_drv.h, removing unused
registers, removing garbage warns, and some other code polishing (Jani, Lucas,
Ville)
- Selftests fixes, improvements and additions (Chris, Dan, Aditya, Matt Auld)
- Fix plane possible_crtcs bit mask (Anshuman)
- Fixes and cleanup on GLK pre production identification and w/a (Ville)
- Fix display orientation on few cases (Hans, Ville)
- dbuf clean-up and improvements for slice arrays handling (Ville)
- Improvement around min cdclk calculation (Stanislav)
- Fixes and refactor around display PLLs (Imre)
- Other execlists and perf fixes (Chris)
- Documentation fixes (Jani, Chris)
- Fix build issue (Anshuman)
- Many more fixes around the locking mechanisms (Chris)
- Other fixes and debugability info around preemption (Chris, Tvrtko)
- Add mechanism to submit a context WA on ring submission (Mika)
- Clear all Eu/L3 resitual context (Prathap)
- More changes around local memory (Abdiel, Matt, Chris)
- Fix RPS (Chris)
- DP MST fix (Lyude)
- Display FBC fixes (Jose, RK)
- debugfs cleanup (Tvrtko)
- More convertion towards drm_debive based loggin (Wambui, Ram)
- Avoid potential buffer overflow (Takashi)
- Ice Lake and Elkhart Lake workarounds (Matt Roper)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314001535.GA2969344@intel.com
This reverts the following commits:
8537f78647 ("netfilter: Introduce egress hook")
5418d3881e ("netfilter: Generalize ingress hook")
b030f194ae ("netfilter: Rename ingress hook include file")
>From the discussion in [0], the author's main motivation to add a hook
in fast path is for an out of tree kernel module, which is a red flag
to begin with. Other mentioned potential use cases like NAT{64,46}
is on future extensions w/o concrete code in the tree yet. Revert as
suggested [1] given the weak justification to add more hooks to critical
fast-path.
[0] https://lore.kernel.org/netdev/cover.1583927267.git.lukas@wunner.de/
[1] https://lore.kernel.org/netdev/20200318.011152.72770718915606186.davem@davemloft.net/
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Miller <davem@davemloft.net>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Nacked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Use nf_flow_offload_tuple() to fetch flow stats, from Paul Blakey.
2) Add new xt_IDLETIMER hard mode, from Manoj Basapathi.
Follow up patch to clean up this new mode, from Dan Carpenter.
3) Add support for geneve tunnel options, from Xin Long.
4) Make sets built-in and remove modular infrastructure for sets,
from Florian Westphal.
5) Remove unused TEMPLATE_NULLS_VAL, from Li RongQing.
6) Statify nft_pipapo_get, from Chen Wandun.
7) Use C99 flexible-array member, from Gustavo A. R. Silva.
8) More descriptive variable names for bitwise, from Jeremy Sowden.
9) Four patches to add tunnel device hardware offload to the flowtable
infrastructure, from wenxu.
10) pipapo set supports for 8-bit grouping, from Stefano Brivio.
11) pipapo can switch between nibble and byte grouping, also from
Stefano.
12) Add AVX2 vectorized version of pipapo, from Stefano Brivio.
13) Update pipapo to be use it for single ranges, from Stefano.
14) Add stateful expression support to elements via control plane,
eg. counter per element.
15) Re-visit sysctls in unprivileged namespaces, from Florian Westphal.
15) Add new egress hook, from Lukas Wunner.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement helpers for PCS accessed via the MII bus using 802.3 clause
22 cycles, conforming to 802.3 clause 37 and Cisco SGMII specifications
for the advertisement word.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for manipulating vlan/tunnel mappings. The
tunnel ids are globally unique and are one per-vlan. There were two
trickier issues - first in order to support vlan ranges we have to
compute the current tunnel id in the following way:
- base tunnel id (attr) + current vlan id - starting vlan id
This is in line how the old API does vlan/tunnel mapping with ranges. We
already have the vlan range present, so it's redundant to add another
attribute for the tunnel range end. It's simply base tunnel id + vlan
range. And second to support removing mappings we need an out-of-band way
to tell the option manipulating function because there are no
special/reserved tunnel id values, so we use a vlan flag to denote the
operation is tunnel mapping removal.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new option - BRIDGE_VLANDB_ENTRY_TUNNEL_ID which is used to dump
the tunnel id mapping. Since they're unique per vlan they can enter a
vlan range if they're consecutive, thus we can calculate the tunnel id
range map simply as: vlan range end id - vlan range start id. The
starting point is the tunnel id in BRIDGE_VLANDB_ENTRY_TUNNEL_ID. This
is similar to how the tunnel entries can be created in a range via the
old API (a vlan range maps to a tunnel range).
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
New Chrome OS keyboards have a "snip" key that is basically a selective
screenshot (allows a user to select an area of screen to be copied).
Allocate a keycode for it.
Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-by: Harry Cutts <hcutts@chromium.org>
Link: https://lore.kernel.org/r/20200313180333.75011-1-rajatja@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit e687ad60af ("netfilter: add netfilter ingress hook after
handle_ing() under unique static key") introduced the ability to
classify packets on ingress.
Allow the same on egress. Position the hook immediately before a packet
is handed to tc and then sent out on an interface, thereby mirroring the
ingress order. This order allows marking packets in the netfilter
egress hook and subsequently using the mark in tc. Another benefit of
this order is consistency with a lot of existing documentation which
says that egress tc is performed after netfilter hooks.
Egress hooks already exist for the most common protocols, such as
NF_INET_LOCAL_OUT or NF_ARP_OUT, and those are to be preferred because
they are executed earlier during packet processing. However for more
exotic protocols, there is currently no provision to apply netfilter on
egress. A common workaround is to enslave the interface to a bridge and
use ebtables, or to resort to tc. But when the ingress hook was
introduced, consensus was that users should be given the choice to use
netfilter or tc, whichever tool suits their needs best:
https://lore.kernel.org/netdev/20150430153317.GA3230@salvia/
This hook is also useful for NAT46/NAT64, tunneling and filtering of
locally generated af_packet traffic such as dhclient.
There have also been occasional user requests for a netfilter egress
hook in the past, e.g.:
https://www.spinics.net/lists/netfilter/msg50038.html
Performance measurements with pktgen surprisingly show a speedup rather
than a slowdown with this commit:
* Without this commit:
Result: OK: 34240933(c34238375+d2558) usec, 100000000 (60byte,0frags)
2920481pps 1401Mb/sec (1401830880bps) errors: 0
* With this commit:
Result: OK: 33997299(c33994193+d3106) usec, 100000000 (60byte,0frags)
2941410pps 1411Mb/sec (1411876800bps) errors: 0
* Without this commit + tc egress:
Result: OK: 39022386(c39019547+d2839) usec, 100000000 (60byte,0frags)
2562631pps 1230Mb/sec (1230062880bps) errors: 0
* With this commit + tc egress:
Result: OK: 37604447(c37601877+d2570) usec, 100000000 (60byte,0frags)
2659259pps 1276Mb/sec (1276444320bps) errors: 0
* With this commit + nft egress:
Result: OK: 41436689(c41434088+d2600) usec, 100000000 (60byte,0frags)
2413320pps 1158Mb/sec (1158393600bps) errors: 0
Tested on a bare-metal Core i7-3615QM, each measurement was performed
three times to verify that the numbers are stable.
Commands to perform a measurement:
modprobe pktgen
echo "add_device lo@3" > /proc/net/pktgen/kpktgend_3
samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh -i 'lo@3' -n 100000000
Commands for testing tc egress:
tc qdisc add dev lo clsact
tc filter add dev lo egress protocol ip prio 1 u32 match ip dst 4.3.2.1/32
Commands for testing nft egress:
nft add table netdev t
nft add chain netdev t co \{ type filter hook egress device lo priority 0 \; \}
nft add rule netdev t co ip daddr 4.3.2.1/32 drop
All testing was performed on the loopback interface to avoid distorting
measurements by the packet handling in the low-level Ethernet driver.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
