Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-02 00:51:44 +00:00
Code Issues Packages Projects Releases Wiki Activity
1,140,002 Commits 7 Branches 863 Tags 6.5 GiB
184c9bdb8f
Commit Graph

3647 Commits

Author SHA1 Message Date
Sam Wu
cdcc5ef26b Revert "cpufreq: schedutil: Move max CPU capacity to sugov_policy" 
This reverts commit 6d5afdc97e.

On a Pixel 6 device, it is observed that this commit increases
latency by approximately 50ms, or 20%, in migrating a task
that requires full CPU utilization from a LITTLE CPU to Fmax
on a big CPU. Reverting this change restores the latency back
to its original baseline value.

Fixes: 6d5afdc97e ("cpufreq: schedutil: Move max CPU capacity to sugov_policy")
Signed-off-by: Sam Wu <wusamuel@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2022-11-22 19:56:52 +01:00
Peter Zijlstra
91dabf33ae sched: Fix race in task_call_func() 
There is a very narrow race between schedule() and task_call_func().

  CPU0						CPU1

  __schedule()
    rq_lock();
    prev_state = READ_ONCE(prev->__state);
    if (... && prev_state) {
      deactivate_tasl(rq, prev, ...)
        prev->on_rq = 0;

						task_call_func()
						  raw_spin_lock_irqsave(p->pi_lock);
						  state = READ_ONCE(p->__state);
						  smp_rmb();
						  if (... || p->on_rq) // false!!!
						    rq = __task_rq_lock()

						  ret = func();

    next = pick_next_task();
    rq = context_switch(prev, next)
      prepare_lock_switch()
        spin_release(&__rq_lockp(rq)->dep_map...)

So while the task is on it's way out, it still holds rq->lock for a
little while, and right then task_call_func() comes in and figures it
doesn't need rq->lock anymore (because the task is already dequeued --
but still running there) and then the __set_task_frozen() thing observes
it's holding rq->lock and yells murder.

Avoid this by waiting for p->on_cpu to get cleared, which guarantees
the task is fully finished on the old CPU.

( While arguably the fixes tag is 'wrong' -- none of the previous
  task_call_func() users appears to care for this case. )

Fixes: f5d39b0208 ("freezer,sched: Rewrite core freezer logic")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lkml.kernel.org/r/Y1kdRNNfUeAU+FNl@hirez.programming.kicks-ass.net
 2022-11-14 09:58:32 +01:00
Kees Cook
8e5bad7dcc sched: Introduce struct balance_callback to avoid CFI mismatches 
Introduce distinct struct balance_callback instead of performing function
pointer casting which will trip CFI. Avoids warnings as found by Clang's
future -Wcast-function-type-strict option:

In file included from kernel/sched/core.c:84:
kernel/sched/sched.h:1755:15: warning: cast from 'void (*)(struct rq *)' to 'void (*)(struct callback_head *)' converts to incompatible function type [-Wcast-function-type-strict]
        head->func = (void (*)(struct callback_head *))func;
                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

No binary differences result from this change.

This patch is a cleanup based on Brad Spengler/PaX Team's modifications
to sched code in their last public patch of grsecurity/PaX based on my
understanding of the code. Changes or omissions from the original code
are mine and don't reflect the original grsecurity/PaX code.

Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1724
Link: https://lkml.kernel.org/r/20221008000758.2957718-1-keescook@chromium.org
 2022-10-17 16:41:25 +02:00
Lin Shengwang
e705968dd6 sched/core: Fix comparison in sched_group_cookie_match() 
In commit 97886d9dcd ("sched: Migration changes for core scheduling"),
sched_group_cookie_match() was added to help determine if a cookie
matches the core state.

However, while it iterates the SMT group, it fails to actually use the
RQ for each of the CPUs iterated, use cpu_rq(cpu) instead of rq to fix
things.

Fixes: 97886d9dcd ("sched: Migration changes for core scheduling")
Signed-off-by: Lin Shengwang <linshengwang1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221008022709.642-1-linshengwang1@huawei.com
 2022-10-17 16:41:24 +02:00
Linus Torvalds
bd9a3dba18 PSI updates for v6.1: 
- Various performance optimizations, resulting in a 4%-9% speedup
    in the mmtests/config-scheduler-perfpipe micro-benchmark.
 
  - New interface to turn PSI on/off on a per cgroup level.
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmNJKPsRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1iPmg//aovCitAQX2lLoHJDIgdQibU40oaEpKTX
 wM549EGz3Dr6qmwF8+qT1U2Ge6af/hHQc5G/ZqDpKbuTjUIc3RmBkqX80dNKFLuH
 uyi9UtfsSriw+ks8fWuDdjr+S4oppwW9ZoIXvK8v4bisd3F31DNGvKPTayNxt73m
 lExfzJiD1oJixDxGX8MGO9QpcoywmjWjzjrB2P+J8hnTpArouHx/HOKdQOpG6wXq
 ZRr9kZvju6ucDpXCTa1HJrfVRxNAh35tx/b4cDtXbBFifVAeKaPOrHapMTVsqfel
 Z7T+2DymhidNYK0hrRJoGUwa/vkz+2Sm1ZLG9LlgUCXVco/9S1zw1ZuQakVvzPen
 wriuxRaAkR+szCP0L8js5+/DAkGa43MjKsvQHmDVnetQtlsAD4eYnn+alQ837SXv
 MP3jwFqF+e4mcWdoQcfh0OWUgGec5XZzdgRYrFkBKyTWGLB2iPivcAMNf0X/h82Q
 xxv4DQJIIJ017GOQ/ho2saq+GbtFCvX8YnGYas9T47Bjjluhjo7jgTVtPTo+mhtN
 RfwMdG718Ap/gvnAX7wMe/t+L/4AP8AIgDRi5L35dTRqETwOjH+LAvOYjleQFYgu
 kMVtLMyzU+TGwHscuzPFRh7TnvSJ4sD48Ll1BPnyZsh3SS9u0gAs1bml7Cu7JbmW
 SIZD/S/hzdI=
 =91tB
 -----END PGP SIGNATURE-----

Merge tag 'sched-psi-2022-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull PSI updates from Ingo Molnar:

 - Various performance optimizations, resulting in a 4%-9% speedup in
   the mmtests/config-scheduler-perfpipe micro-benchmark.

 - New interface to turn PSI on/off on a per cgroup level.

* tag 'sched-psi-2022-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/psi: Per-cgroup PSI accounting disable/re-enable interface
  sched/psi: Cache parent psi_group to speed up group iteration
  sched/psi: Consolidate cgroup_psi()
  sched/psi: Add PSI_IRQ to track IRQ/SOFTIRQ pressure
  sched/psi: Remove NR_ONCPU task accounting
  sched/psi: Optimize task switch inside shared cgroups again
  sched/psi: Move private helpers to sched/stats.h
  sched/psi: Save percpu memory when !psi_cgroups_enabled
  sched/psi: Don't create cgroup PSI files when psi_disabled
  sched/psi: Fix periodic aggregation shut off
 2022-10-14 13:03:00 -07:00
Linus Torvalds
27bc50fc90 - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in 
linux-next for a couple of months without, to my knowledge, any negative
   reports (or any positive ones, come to that).
 
 - Also the Maple Tree from Liam R.  Howlett.  An overlapping range-based
   tree for vmas.  It it apparently slight more efficient in its own right,
   but is mainly targeted at enabling work to reduce mmap_lock contention.
 
   Liam has identified a number of other tree users in the kernel which
   could be beneficially onverted to mapletrees.
 
   Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
   (https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com).
   This has yet to be addressed due to Liam's unfortunately timed
   vacation.  He is now back and we'll get this fixed up.
 
 - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer.  It uses
   clang-generated instrumentation to detect used-unintialized bugs down to
   the single bit level.
 
   KMSAN keeps finding bugs.  New ones, as well as the legacy ones.
 
 - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
   memory into THPs.
 
 - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support
   file/shmem-backed pages.
 
 - userfaultfd updates from Axel Rasmussen
 
 - zsmalloc cleanups from Alexey Romanov
 
 - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure
 
 - Huang Ying adds enhancements to NUMA balancing memory tiering mode's
   page promotion, with a new way of detecting hot pages.
 
 - memcg updates from Shakeel Butt: charging optimizations and reduced
   memory consumption.
 
 - memcg cleanups from Kairui Song.
 
 - memcg fixes and cleanups from Johannes Weiner.
 
 - Vishal Moola provides more folio conversions
 
 - Zhang Yi removed ll_rw_block() :(
 
 - migration enhancements from Peter Xu
 
 - migration error-path bugfixes from Huang Ying
 
 - Aneesh Kumar added ability for a device driver to alter the memory
   tiering promotion paths.  For optimizations by PMEM drivers, DRM
   drivers, etc.
 
 - vma merging improvements from Jakub Matěn.
 
 - NUMA hinting cleanups from David Hildenbrand.
 
 - xu xin added aditional userspace visibility into KSM merging activity.
 
 - THP & KSM code consolidation from Qi Zheng.
 
 - more folio work from Matthew Wilcox.
 
 - KASAN updates from Andrey Konovalov.
 
 - DAMON cleanups from Kaixu Xia.
 
 - DAMON work from SeongJae Park: fixes, cleanups.
 
 - hugetlb sysfs cleanups from Muchun Song.
 
 - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0HaPgAKCRDdBJ7gKXxA
 joPjAQDZ5LlRCMWZ1oxLP2NOTp6nm63q9PWcGnmY50FjD/dNlwEAnx7OejCLWGWf
 bbTuk6U2+TKgJa4X7+pbbejeoqnt5QU=
 =xfWx
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

 - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
   linux-next for a couple of months without, to my knowledge, any
   negative reports (or any positive ones, come to that).

 - Also the Maple Tree from Liam Howlett. An overlapping range-based
   tree for vmas. It it apparently slightly more efficient in its own
   right, but is mainly targeted at enabling work to reduce mmap_lock
   contention.

   Liam has identified a number of other tree users in the kernel which
   could be beneficially onverted to mapletrees.

   Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
   at [1]. This has yet to be addressed due to Liam's unfortunately
   timed vacation. He is now back and we'll get this fixed up.

 - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
   clang-generated instrumentation to detect used-unintialized bugs down
   to the single bit level.

   KMSAN keeps finding bugs. New ones, as well as the legacy ones.

 - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
   memory into THPs.

 - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
   support file/shmem-backed pages.

 - userfaultfd updates from Axel Rasmussen

 - zsmalloc cleanups from Alexey Romanov

 - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
   memory-failure

 - Huang Ying adds enhancements to NUMA balancing memory tiering mode's
   page promotion, with a new way of detecting hot pages.

 - memcg updates from Shakeel Butt: charging optimizations and reduced
   memory consumption.

 - memcg cleanups from Kairui Song.

 - memcg fixes and cleanups from Johannes Weiner.

 - Vishal Moola provides more folio conversions

 - Zhang Yi removed ll_rw_block() :(

 - migration enhancements from Peter Xu

 - migration error-path bugfixes from Huang Ying

 - Aneesh Kumar added ability for a device driver to alter the memory
   tiering promotion paths. For optimizations by PMEM drivers, DRM
   drivers, etc.

 - vma merging improvements from Jakub Matěn.

 - NUMA hinting cleanups from David Hildenbrand.

 - xu xin added aditional userspace visibility into KSM merging
   activity.

 - THP & KSM code consolidation from Qi Zheng.

 - more folio work from Matthew Wilcox.

 - KASAN updates from Andrey Konovalov.

 - DAMON cleanups from Kaixu Xia.

 - DAMON work from SeongJae Park: fixes, cleanups.

 - hugetlb sysfs cleanups from Muchun Song.

 - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.

Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]

* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
  hugetlb: allocate vma lock for all sharable vmas
  hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
  hugetlb: fix vma lock handling during split vma and range unmapping
  mglru: mm/vmscan.c: fix imprecise comments
  mm/mglru: don't sync disk for each aging cycle
  mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
  mm: memcontrol: use do_memsw_account() in a few more places
  mm: memcontrol: deprecate swapaccounting=0 mode
  mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
  mm/secretmem: remove reduntant return value
  mm/hugetlb: add available_huge_pages() func
  mm: remove unused inline functions from include/linux/mm_inline.h
  selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
  selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
  selftests/vm: add thp collapse shmem testing
  selftests/vm: add thp collapse file and tmpfs testing
  selftests/vm: modularize thp collapse memory operations
  selftests/vm: dedup THP helpers
  mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
  mm/madvise: add file and shmem support to MADV_COLLAPSE
  ...
 2022-10-10 17:53:04 -07:00
Linus Torvalds
d4013bc4d4 bitmap patches for v6.1-rc1 
From Phil Auld:
 drivers/base: Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES
 
 From me:
 cpumask: cleanup nr_cpu_ids vs nr_cpumask_bits mess
 
 This series cleans that mess and adds new config FORCE_NR_CPUS that
 allows to optimize cpumask subsystem if the number of CPUs is known
 at compile-time.
 
 From me:
 lib: optimize find_bit() functions
 
 Reworks find_bit() functions based on new FIND_{FIRST,NEXT}_BIT() macros.
 
 From me:
 lib/find: add find_nth_bit()
 
 Adds find_nth_bit(), which is ~70 times faster than bitcounting with
 for_each() loop:
         for_each_set_bit(bit, mask, size)
                 if (n-- == 0)
                         return bit;
 
 Also adds bitmap_weight_and() to let people replace this pattern:
 	tmp = bitmap_alloc(nbits);
 	bitmap_and(tmp, map1, map2, nbits);
 	weight = bitmap_weight(tmp, nbits);
 	bitmap_free(tmp);
 with a single bitmap_weight_and() call.
 
 From me:
 cpumask: repair cpumask_check()
 
 After switching cpumask to use nr_cpu_ids, cpumask_check() started
 generating many false-positive warnings. This series fixes it.
 
 From Valentin Schneider:
 bitmap,cpumask: Add for_each_cpu_andnot() and for_each_cpu_andnot()
 
 Extends the API with one more function and applies it in sched/core.
 -----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEi8GdvG6xMhdgpu/4sUSA/TofvsgFAmNBwmUACgkQsUSA/Tof
 vshPRwv+KlqnZlKtuSPgbo/Kgswworpi/7TqfnN9GWlb8AJ2uhjBKI3GFwv4TDow
 7KV6wdKdXYLr4pktcIhWy3qLrT+bDDExfarHRo3QI1A1W42EJ+ZiUaGnQGcnVMzD
 5q/K1YMJYq0oaesHEw5PVUh8mm6h9qRD8VbX1u+riW/VCWBj3bho9Dp4mffQ48Q6
 hVy/SnMGgClQwNYp+sxkqYx38xUqUGYoU5MzeziUmoS6pZQh+4lF33MULnI3EKmc
 /ehXilPPtOV/Tm0RovDWFfm3rjNapV9FXHu8Ob2z/c+1A29EgXnE3pwrBDkAx001
 TQrL9qbCANRDGPLzWQHw0dwFIaXvTdrSttCsfYYfU5hI4JbnJEe0Pqkaaohy7jqm
 r0dW/TlyOG5T+k8Kwdx9w9A+jKs8TbKKZ8HOaN8BpkXswVnpbzpQbj3TITZI4aeV
 6YR4URBQ5UkrVLEXFXbrOzwjL2zqDdyNoBdTJmGLJ+5b/n0HHzmyMVkegNIwLLM3
 GR7sMQae
 =Q/+F
 -----END PGP SIGNATURE-----

Merge tag 'bitmap-6.1-rc1' of https://github.com/norov/linux

Pull bitmap updates from Yury Norov:

 - Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES (Phil Auld)

 - cleanup nr_cpu_ids vs nr_cpumask_bits mess (me)

   This series cleans that mess and adds new config FORCE_NR_CPUS that
   allows to optimize cpumask subsystem if the number of CPUs is known
   at compile-time.

 - optimize find_bit() functions (me)

   Reworks find_bit() functions based on new FIND_{FIRST,NEXT}_BIT()
   macros.

 - add find_nth_bit() (me)

   Adds find_nth_bit(), which is ~70 times faster than bitcounting with
   for_each() loop:

	for_each_set_bit(bit, mask, size)
		if (n-- == 0)
			return bit;

   Also adds bitmap_weight_and() to let people replace this pattern:

	tmp = bitmap_alloc(nbits);
	bitmap_and(tmp, map1, map2, nbits);
	weight = bitmap_weight(tmp, nbits);
	bitmap_free(tmp);

   with a single bitmap_weight_and() call.

 - repair cpumask_check() (me)

   After switching cpumask to use nr_cpu_ids, cpumask_check() started
   generating many false-positive warnings. This series fixes it.

 - Add for_each_cpu_andnot() and for_each_cpu_andnot() (Valentin
   Schneider)

   Extends the API with one more function and applies it in sched/core.

* tag 'bitmap-6.1-rc1' of https://github.com/norov/linux: (28 commits)
  sched/core: Merge cpumask_andnot()+for_each_cpu() into for_each_cpu_andnot()
  lib/test_cpumask: Add for_each_cpu_and(not) tests
  cpumask: Introduce for_each_cpu_andnot()
  lib/find_bit: Introduce find_next_andnot_bit()
  cpumask: fix checking valid cpu range
  lib/bitmap: add tests for for_each() loops
  lib/find: optimize for_each() macros
  lib/bitmap: introduce for_each_set_bit_wrap() macro
  lib/find_bit: add find_next{,_and}_bit_wrap
  cpumask: switch for_each_cpu{,_not} to use for_each_bit()
  net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and}
  cpumask: add cpumask_nth_{,and,andnot}
  lib/bitmap: remove bitmap_ord_to_pos
  lib/bitmap: add tests for find_nth_bit()
  lib: add find_nth{,_and,_andnot}_bit()
  lib/bitmap: add bitmap_weight_and()
  lib/bitmap: don't call __bitmap_weight() in kernel code
  tools: sync find_bit() implementation
  lib/find_bit: optimize find_next_bit() functions
  lib/find_bit: create find_first_zero_bit_le()
  ...
 2022-10-10 12:49:34 -07:00
Linus Torvalds
30c999937f Scheduler changes for v6.1: 
- Debuggability:
 
      - Change most occurances of BUG_ON() to WARN_ON_ONCE()
 
      - Reorganize & fix TASK_ state comparisons, turn it into a bitmap
 
      - Update/fix misc scheduler debugging facilities
 
  - Load-balancing & regular scheduling:
 
      - Improve the behavior of the scheduler in presence of lot of
        SCHED_IDLE tasks - in particular they should not impact other
        scheduling classes.
 
      - Optimize task load tracking, cleanups & fixes
 
      - Clean up & simplify misc load-balancing code
 
  - Freezer:
 
      - Rewrite the core freezer to behave better wrt thawing and be simpler
        in general, by replacing PF_FROZEN with TASK_FROZEN & fixing/adjusting
        all the fallout.
 
  - Deadline scheduler:
 
      - Fix the DL capacity-aware code
 
      - Factor out dl_task_is_earliest_deadline() & replenish_dl_new_period()
 
      - Relax/optimize locking in task_non_contending()
 
  - Cleanups:
 
      - Factor out the update_current_exec_runtime() helper
 
      - Various cleanups, simplifications
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmM/01cRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1geZA/+PB4KC1T9aVxzaTHI36R03YgJYZmIdtxw
 wTf02MixePmz+gQCbepJbempGOh5ST28aOcI0xhdYOql5B63MaUBBMlB0HvGUyDG
 IU3zETqLMRtAbnSTdQFv8m++ECUtZYp8/x1FCel4WO7ya4ETkRu1NRfCoUepEhpZ
 aVAlae9LH3NBaF9t7s0PT2lTjf3pIzMFRkddJ0ywJhbFR3VnWat05fAK+J6fGY8+
 LS54coefNlJD4oDh5TY8uniL1j5SmWmmwbk9Cdj7bLU5P3dFSS0/+5FJNHJPVGDE
 srGT7wstRUcDrN0CnZo48VIUBiApJCCDqTfJYi9wNYd0NAHvwY6MIJJgEIY8mKsI
 L/qH26H81Wt+ezSZ/5JIlGlZ/LIeNaa6OO/fbWEYABBQogvvx3nxsRNUYKSQzumH
 CnSBasBjLnjWyLlK4qARM9cI7NFSEK6NUigrEx/7h8JFu/8T4DlSy6LsF1HUyKgq
 4+FJLAqG6cL0tcwB/fHYd0oRESN8dStnQhGxSojgufwLc7dlFULvCYF5JM/dX+/V
 IKwbOfIOeOn6ViMtSOXAEGdII+IQ2/ZFPwr+8Z5JC7NzvTVL6xlu/3JXkLZR3L7o
 yaXTSaz06h1vil7Z+GRf7RHc+wUeGkEpXh5vnarGZKXivhFdWsBdROIJANK+xR0i
 TeSLCxQxXlU=
 =KjMD
 -----END PGP SIGNATURE-----

Merge tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Ingo Molnar:
 "Debuggability:

   - Change most occurances of BUG_ON() to WARN_ON_ONCE()

   - Reorganize & fix TASK_ state comparisons, turn it into a bitmap

   - Update/fix misc scheduler debugging facilities

  Load-balancing & regular scheduling:

   - Improve the behavior of the scheduler in presence of lot of
     SCHED_IDLE tasks - in particular they should not impact other
     scheduling classes.

   - Optimize task load tracking, cleanups & fixes

   - Clean up & simplify misc load-balancing code

  Freezer:

   - Rewrite the core freezer to behave better wrt thawing and be
     simpler in general, by replacing PF_FROZEN with TASK_FROZEN &
     fixing/adjusting all the fallout.

  Deadline scheduler:

   - Fix the DL capacity-aware code

   - Factor out dl_task_is_earliest_deadline() &
     replenish_dl_new_period()

   - Relax/optimize locking in task_non_contending()

  Cleanups:

   - Factor out the update_current_exec_runtime() helper

   - Various cleanups, simplifications"

* tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
  sched: Fix more TASK_state comparisons
  sched: Fix TASK_state comparisons
  sched/fair: Move call to list_last_entry() in detach_tasks
  sched/fair: Cleanup loop_max and loop_break
  sched/fair: Make sure to try to detach at least one movable task
  sched: Show PF_flag holes
  freezer,sched: Rewrite core freezer logic
  sched: Widen TAKS_state literals
  sched/wait: Add wait_event_state()
  sched/completion: Add wait_for_completion_state()
  sched: Add TASK_ANY for wait_task_inactive()
  sched: Change wait_task_inactive()s match_state
  freezer,umh: Clean up freezer/initrd interaction
  freezer: Have {,un}lock_system_sleep() save/restore flags
  sched: Rename task_running() to task_on_cpu()
  sched/fair: Cleanup for SIS_PROP
  sched/fair: Default to false in test_idle_cores()
  sched/fair: Remove useless check in select_idle_core()
  sched/fair: Avoid double search on same cpu
  sched/fair: Remove redundant check in select_idle_smt()
  ...
 2022-10-10 09:10:28 -07:00
Linus Torvalds
513389809e for-6.1/block-2022-10-03 
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmM67XkQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpiHoD/9eN+6YnNRPu5+2zeGnnm1Nlwic6YMZeORr
 KFIeC0COMWoFhNBIPFkgAKT+0qIH+uGt5UsHSM3Y5La7wMR8yLxD4PAnvTZ/Ijtt
 yxVIOmonJoQ0OrQ2kTbvDXL/9OCUrzwXXyUIEPJnH0Ca1mxeNOgDHbE7VGF6DMul
 0D3pI8qs2WLnHlDi1V/8kH5qZ6WoAJSDcb8sTzOUVnyveZPNaZhGQJuHA2XAYMtg
 fqKMDJqgmNk6jdTMUgdF5B+rV64PQoCy28I7fXqGkEe+RE5TBy57vAa0XY84V8XR
 /a8CEuwMts2ypk1hIcJG8Vv8K6u5war9yPM5MTngKsoMpzNIlhrhaJQVyjKdcs+E
 Ixwzexu6xTYcrcq+mUARgeTh79FzTBM/uXEdbCG2G3S6HPd6UZWUJZGfxw/l0Aem
 V4xB7lj6SQaJDU1iJCYUaHcekNXhQAPvyVG+R2ED1SO3McTpTPIM1aeigxw6vj7u
 bH3Kfdr94Z8HNuoLuiS6YYfjNt2Shf4LEB6GxKJ9TYHtyhdOyO0H64jGHpygrWqN
 cSnkWPUqUUNpF7srKM0ZgbliCshvmyJc4aMOFd0gBY/kXf5J/j7IXvh8TFCi9rHH
 0KyZH3/3Zsu9geUn3ynznlr4FXU+BcqE6boaa/iWb9sN1m+Rvaahv8cSch/dh44a
 vQNj/iOBQA==
 =R05e
 -----END PGP SIGNATURE-----

Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux

Pull block updates from Jens Axboe:

 - NVMe pull requests via Christoph:
      - handle number of queue changes in the TCP and RDMA drivers
        (Daniel Wagner)
      - allow changing the number of queues in nvmet (Daniel Wagner)
      - also consider host_iface when checking ip options (Daniel
        Wagner)
      - don't map pages which can't come from HIGHMEM (Fabio M. De
        Francesco)
      - avoid unnecessary flush bios in nvmet (Guixin Liu)
      - shrink and better pack the nvme_iod structure (Keith Busch)
      - add comment for unaligned "fake" nqn (Linjun Bao)
      - print actual source IP address through sysfs "address" attr
        (Martin Belanger)
      - various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang)
      - handle effects after freeing the request (Keith Busch)
      - copy firmware_rev on each init (Keith Busch)
      - restrict management ioctls to admin (Keith Busch)
      - ensure subsystem reset is single threaded (Keith Busch)
      - report the actual number of tagset maps in nvme-pci (Keith
        Busch)
      - small fabrics authentication fixups (Christoph Hellwig)
      - add common code for tagset allocation and freeing (Christoph
        Hellwig)
      - stop using the request_queue in nvmet (Christoph Hellwig)
      - set min_align_mask before calculating max_hw_sectors (Rishabh
        Bhatnagar)
      - send a rediscover uevent when a persistent discovery controller
        reconnects (Sagi Grimberg)
      - misc nvmet-tcp fixes (Varun Prakash, zhenwei pi)

 - MD pull request via Song:
      - Various raid5 fix and clean up, by Logan Gunthorpe and David
        Sloan.
      - Raid10 performance optimization, by Yu Kuai.

 - sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu)

 - IO scheduler switching quisce fix (Keith)

 - s390/dasd block driver updates (Stefan)

 - support for recovery for the ublk driver (ZiyangZhang)

 - rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph)

 - blk-mq and null_blk map fixes (Bart)

 - various bcache fixes (Coly, Jilin, Jules)

 - nbd signal hang fix (Shigeru)

 - block writeback throttling fix (Yu)

 - optimize the passthrough mapping handling (me)

 - prepare block cgroups to being gendisk based (Christoph)

 - get rid of an old PSI hack in the block layer, moving it to the
   callers instead where it belongs (Christoph)

 - blk-throttle fixes and cleanups (Yu)

 - misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj,
   Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming,
   Miaohe, Bart, Coly, Gaosheng

* tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits)
  sbitmap: fix lockup while swapping
  block: add rationale for not using blk_mq_plug() when applicable
  block: adapt blk_mq_plug() to not plug for writes that require a zone lock
  s390/dasd: use blk_mq_alloc_disk
  blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
  nvmet: don't look at the request_queue in nvmet_bdev_set_limits
  nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
  blk-mq: use quiesced elevator switch when reinitializing queues
  block: replace blk_queue_nowait with bdev_nowait
  nvme: remove nvme_ctrl_init_connect_q
  nvme-loop: use the tagset alloc/free helpers
  nvme-loop: store the generic nvme_ctrl in set->driver_data
  nvme-loop: initialize sqsize later
  nvme-fc: use the tagset alloc/free helpers
  nvme-fc: store the generic nvme_ctrl in set->driver_data
  nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
  nvme-rdma: use the tagset alloc/free helpers
  nvme-rdma: store the generic nvme_ctrl in set->driver_data
  nvme-tcp: use the tagset alloc/free helpers
  nvme-tcp: store the generic nvme_ctrl in set->driver_data
  ...
 2022-10-07 09:19:14 -07:00
Valentin Schneider
585463f0d5 sched/core: Merge cpumask_andnot()+for_each_cpu() into for_each_cpu_andnot() 
This removes the second use of the sched_core_mask temporary mask.

Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
 2022-10-06 05:57:36 -07:00
Linus Torvalds
c79e6fa98c Power management updates for 6.1-rc1 
- Add isupport for Tiger Lake in no-HWP mode to intel_pstate (Doug
    Smythies).
 
  - Update the AMD P-state driver (Perry Yuan):
    * Fix wrong lowest perf fetch.
    * Map desired perf into pstate scope for powersave governor.
    * Update pstate frequency transition delay time.
    * Fix initial highest_perf value.
    * Clean up.
 
  - Move max CPU capacity to sugov_policy in the schedutil cpufreq
    governor (Lukasz Luba).
 
  - Add SM6115 to cpufreq-dt blocklist (Adam Skladowski).
 
  - Add support for Tegra239 and minor cleanups (Sumit Gupta, ye xingchen,
    and Yang Yingliang).
 
  - Add freq qos for qcom cpufreq driver and minor cleanups (Xuewen Yan,
    and Viresh Kumar).
 
  - Minor cleanups around functions called at module_init() (Xiu Jianfeng).
 
  - Use module_init and add module_exit for bmips driver (Zhang Jianhua).
 
  - Add AlderLake-N support to intel_idle (Zhang Rui).
 
  - Replace strlcpy() with unused retval with strscpy() in intel_idle
    (Wolfram Sang).
 
  - Remove redundant check from cpuidle_switch_governor() (Yu Liao).
 
  - Replace strlcpy() with unused retval with strscpy() in the powernv
    cpuidle driver (Wolfram Sang).
 
  - Drop duplicate word from a comment in the coupled cpuidle driver
    (Jason Wang).
 
  - Make rpm_resume() return -EINPROGRESS if RPM_NOWAIT is passed to it
    in the flags and the device is about to resume (Rafael Wysocki).
 
  - Add extra debugging statement for multiple active IRQs to system
    wakeup handling code (Mario Limonciello).
 
  - Replace strlcpy() with unused retval with strscpy() in the core
    system suspend support code (Wolfram Sang).
 
  - Update the intel_rapl power capping driver:
    * Use standard Energy Unit for SPR Dram RAPL domain (Zhang Rui).
    * Add support for RAPTORLAKE_S (Zhang Rui).
    * Fix UBSAN shift-out-of-bounds issue (Chao Qin).
 
  - Handle -EPROBE_DEFER when regulator is not probed on
    mtk-ci-devfreq.c (AngeloGioacchino Del Regno).
 
  - Fix message typo and use dev_err_probe() in rockchip-dfi.c
    (Christophe JAILLET).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmM7OrYSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxeKAP/jFiZ1lhTGRngiVLMV6a6SSSy5xzzXZZ
 b/V0oqsuUvWWo6CzVmfU4QfmKGr55+77NgI9Yh5qN6zJTEJmunuCYwVD80KdxPDJ
 8SjMUNCACiVwfryLR1gFJlO+0BN4CWTxvto2gjGxzm0l1UQBACf71wm9MQCP8b7A
 gcBNuOtM7o5NLywDB+/528SiF9AXfZKjkwXhJACimak5yQytaCJaqtOWtcG2KqYF
 USunmqSB3IIVkAa5LJcwloc8wxHYo5mTPaWGGuSA65hfF42k3vJQ2/b8v8oTVza7
 bKzhegErIYtL6B9FjB+P1FyknNOvT7BYr+4RSGLvaPySfjMn1bwz9fM1Epo59Guk
 Azz3ExpaPixDh+x7b89W1Gb751FZU/zlWT+h1CNy5sOP/ChfxgCEBHw0mnWJ2Y0u
 CPcI/Ch0FNQHG+PdbdGlyfvORHVh7te/t6dOhoEHXBue+1r3VkOo8tRGY9x+2IrX
 /JB968u1r0oajF0btGwaDdbbWlyMRTzjrxVl3bwsuz/Kv/0JxsryND2JT0zkKAMZ
 qYT29HQxhdE0Duw1chgAK6X+BsgP58Bu6LeM3mVcwnGPZE9QvcFa0GQh7z+H71AW
 3yOGNmMVMqQSThBYFC6GDi7O2N1UEsLOMV9+ThTRh6D11nU4uiITM5QVIn8nWZGR
 z3IZ52Jg0oeJ
 =+3IL
 -----END PGP SIGNATURE-----

Merge tag 'pm-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add support for some new hardware, extend the existing hardware
  support, fix some issues and clean up code

  Specifics:

   - Add isupport for Tiger Lake in no-HWP mode to intel_pstate (Doug
     Smythies)

   - Update the AMD P-state driver (Perry Yuan):
      - Fix wrong lowest perf fetch
      - Map desired perf into pstate scope for powersave governor
      - Update pstate frequency transition delay time
      - Fix initial highest_perf value
      - Clean up

   - Move max CPU capacity to sugov_policy in the schedutil cpufreq
     governor (Lukasz Luba)

   - Add SM6115 to cpufreq-dt blocklist (Adam Skladowski)

   - Add support for Tegra239 and minor cleanups (Sumit Gupta, ye
     xingchen, and Yang Yingliang)

   - Add freq qos for qcom cpufreq driver and minor cleanups (Xuewen
     Yan, and Viresh Kumar)

   - Minor cleanups around functions called at module_init() (Xiu
     Jianfeng)

   - Use module_init and add module_exit for bmips driver (Zhang
     Jianhua)

   - Add AlderLake-N support to intel_idle (Zhang Rui)

   - Replace strlcpy() with unused retval with strscpy() in intel_idle
     (Wolfram Sang)

   - Remove redundant check from cpuidle_switch_governor() (Yu Liao)

   - Replace strlcpy() with unused retval with strscpy() in the powernv
     cpuidle driver (Wolfram Sang)

   - Drop duplicate word from a comment in the coupled cpuidle driver
     (Jason Wang)

   - Make rpm_resume() return -EINPROGRESS if RPM_NOWAIT is passed to it
     in the flags and the device is about to resume (Rafael Wysocki)

   - Add extra debugging statement for multiple active IRQs to system
     wakeup handling code (Mario Limonciello)

   - Replace strlcpy() with unused retval with strscpy() in the core
     system suspend support code (Wolfram Sang)

   - Update the intel_rapl power capping driver:
      - Use standard Energy Unit for SPR Dram RAPL domain (Zhang Rui).
      - Add support for RAPTORLAKE_S (Zhang Rui).
      - Fix UBSAN shift-out-of-bounds issue (Chao Qin)

   - Handle -EPROBE_DEFER when regulator is not probed on
     mtk-ci-devfreq.c (AngeloGioacchino Del Regno)

   - Fix message typo and use dev_err_probe() in rockchip-dfi.c
     (Christophe JAILLET)"

* tag 'pm-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits)
  cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh
  cpufreq: Add __init annotation to module init funcs
  cpufreq: tegra194: change tegra239_cpufreq_soc to static
  PM / devfreq: rockchip-dfi: Fix an error message
  PM / devfreq: mtk-cci: Handle sram regulator probe deferral
  powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domain
  PM: runtime: Return -EINPROGRESS from rpm_resume() in the RPM_NOWAIT case
  intel_idle: Add AlderLake-N support
  powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue
  cpufreq: tegra194: Add support for Tegra239
  cpufreq: qcom-cpufreq-hw: Fix uninitialized throttled_freq warning
  cpufreq: intel_pstate: Add Tigerlake support in no-HWP mode
  powercap: intel_rapl: Add support for RAPTORLAKE_S
  cpufreq: amd-pstate: Fix initial highest_perf value
  cpuidle: Remove redundant check in cpuidle_switch_governor()
  PM: wakeup: Add extra debugging statement for multiple active IRQs
  cpufreq: tegra194: Remove the unneeded result variable
  PM: suspend: move from strlcpy() with unused retval to strscpy()
  intel_idle: move from strlcpy() with unused retval to strscpy()
  cpuidle: powernv: move from strlcpy() with unused retval to strscpy()
  ...
 2022-10-03 13:26:47 -07:00
Rafael J. Wysocki
0766fa2e8a Merge branch 'pm-cpufreq' 
Merge cpufreq changes for 6.1-rc1:

 - Add isupport for Tiger Lake in no-HWP mode to intel_pstate (Doug
   Smythies).

 - Update the AMD P-state driver (Perry Yuan):
   * Fix wrong lowest perf fetch.
   * Map desired perf into pstate scope for powersave governor.
   * Update pstate frequency transition delay time.
   * Fix initial highest_perf value.
   * Clean up.

 - Move max CPU capacity to sugov_policy in the schedutil cpufreq
   governor (Lukasz Luba).

 - Add SM6115 to cpufreq-dt blocklist (Adam Skladowski).

 - Add support for Tegra239 and minor cleanups (Sumit Gupta, ye xingchen,
   and Yang Yingliang).

 - Add freq qos for qcom cpufreq driver and minor cleanups (Xuewen Yan,
   and Viresh Kumar).

 - Minor cleanups around functions called at module_init() (Xiu Jianfeng).

 - Use module_init and add module_exit for bmips driver (Zhang Jianhua).

* pm-cpufreq:
  cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh
  cpufreq: Add __init annotation to module init funcs
  cpufreq: tegra194: change tegra239_cpufreq_soc to static
  cpufreq: tegra194: Add support for Tegra239
  cpufreq: qcom-cpufreq-hw: Fix uninitialized throttled_freq warning
  cpufreq: intel_pstate: Add Tigerlake support in no-HWP mode
  cpufreq: amd-pstate: Fix initial highest_perf value
  cpufreq: tegra194: Remove the unneeded result variable
  cpufreq: amd-pstate: update pstate frequency transition delay time
  cpufreq: amd_pstate: map desired perf into pstate scope for powersave governor
  cpufreq: amd_pstate: fix wrong lowest perf fetch
  cpufreq: amd-pstate: fix white-space
  cpufreq: amd-pstate: simplify cpudata pointer assignment
  cpufreq: bmips-cpufreq: Use module_init and add module_exit
  cpufreq: schedutil: Move max CPU capacity to sugov_policy
  cpufreq: Add SM6115 to cpufreq-dt-platdev blocklist
 2022-10-03 20:19:13 +02:00
Linus Torvalds
890f242084 RCU pull request for v6.1 
This pull request contains the following branches:
 
 doc.2022.08.31b: Documentation updates.  This is the first in a series
 	from an ongoing review of the RCU documentation.  "Why are people
 	thinking -that- about RCU?  Oh.  Because that is an entirely
 	reasonable interpretation of its documentation."
 
 fixes.2022.08.31b: Miscellaneous fixes.
 
 kvfree.2022.08.31b: Improved memory allocation and heuristics.
 
 nocb.2022.09.01a: Improve rcu_nocbs diagnostic output.
 
 poll.2022.08.31b: Add full-sized polled RCU grace period state values.
 	These are the same size as an rcu_head structure, which is double
 	that of the traditional unsigned long state values that may still
 	be obtained from et_state_synchronize_rcu().  The added size
 	avoids missing overlapping grace periods.  This benefit is that
 	call_rcu() can be replaced by polling, which can be attractive
 	in situations where RCU-protected data is aged out of memory.
 
 	Early in the series, the size of this state value is three
 	unsigned longs.  Later in the series, the synchronize_rcu() and
 	synchronize_rcu_expedited() fastpaths are reworked to permit
 	the full state to be represented by only two unsigned longs.
 	This reworking slows these two functions down in SMP kernels
 	running either on single-CPU systems or on systems with all but
 	one CPU offlined, but this should not be a significant problem.
 	And if it somehow becomes a problem in some yet-as-unforeseen
 	situations, three-value state values can be provided for only
 	those situations.
 
 	Finally, a pair of functions named same_state_synchronize_rcu()
 	and same_state_synchronize_rcu_full() allow grace-period state
 	values to be compared for equality.  This permits users to
 	maintain lists of data structures having the same state value,
 	removing the need for per-data-structure grace-period state
 	values, thus decreasing memory footprint.
 
 poll-srcu.2022.08.31b: Polled SRCU grace-period updates, including
 	adding tests to rcutorture and reducing the incidence of Tiny
 	SRCU grace-period-state counter wrap.
 
 tasks.2022.08.31b: Improve Tasks RCU diagnostics and quiescent-state
 	detection.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmM3bxQTHHBhdWxtY2tA
 a2VybmVsLm9yZwAKCRCevxLzctn7jC0zD/0cPe9Nl3LPKVTqDN8wWG6SUOHcwQrg
 dLBUo1pbBh3mK3HcHzwl1iIF7gd2nmKN7UT3m+C+qv+N3Q9ej9K+MutGThCiRvNT
 A56TDYU9I1xfqoQ25E9TL7nqty818rtYYMl36Rw8epcLKHo/It9MFODb5kEBY5ir
 P5UaIK2D4heHfJL6Di8JDq9vC5a/NlNIIkiIj7lUB+px0FpVW0dUqmnWbIOE74YH
 OBGJ/Mxn6KDO4WeFO0v0DxVaBTLd+khu6W0JspI0szOO6iyTqiDCGE5EqkEdcs5I
 Fk9WCifdo9nrQG0LPIuEBv0YnwNfGbe5nYXupAmGFb3tdCbjkM+W0UBUE032nXog
 3E6m5FEBD1XGQttScFHm70kYssa+xI7khGb9/ZFoYN/QW28oWqwfnx6+eAZGxPNS
 AZx6pc2bebg8sOUhkz/Sv+qMH7CQgIgcMR66SKl5SdT1Onaig45sgdUuC23BshgG
 oEdDxvK7vexFQT6q0oqU8LAO/CVKdyVIswt3pB6CUmn8yNgSo+qDZzlEHt0gPdMY
 4Xa1jnNtOHobDnI4g0JMdVqAujByrRq74ZsVW96hdedKrA0r9y462jnVBm9tqW68
 lu0Lw9WLif2kw0lMY8Q59zqTL+fB8TdNiZrHoqefwvQ/ZrvinfHGSblcrS8zAhX3
 4oVwCUs9pPQRMA==
 =AZPZ
 -----END PGP SIGNATURE-----

Merge tag 'rcu.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull RCU updates from Paul McKenney:

 - Documentation updates.

   This is the first in a series from an ongoing review of the RCU
   documentation. "Why are people thinking -that- about RCU? Oh. Because
   that is an entirely reasonable interpretation of its documentation."

 - Miscellaneous fixes.

 - Improved memory allocation and heuristics.

 - Improve rcu_nocbs diagnostic output.

 - Add full-sized polled RCU grace period state values.

   These are the same size as an rcu_head structure, which is double
   that of the traditional unsigned long state values that may still be
   obtained from et_state_synchronize_rcu(). The added size avoids
   missing overlapping grace periods. This benefit is that call_rcu()
   can be replaced by polling, which can be attractive in situations
   where RCU-protected data is aged out of memory.

   Early in the series, the size of this state value is three unsigned
   longs. Later in the series, the fastpaths in synchronize_rcu() and
   synchronize_rcu_expedited() are reworked to permit the full state to
   be represented by only two unsigned longs. This reworking slows these
   two functions down in SMP kernels running either on single-CPU
   systems or on systems with all but one CPU offlined, but this should
   not be a significant problem. And if it somehow becomes a problem in
   some yet-as-unforeseen situations, three-value state values can be
   provided for only those situations.

   Finally, a pair of functions named same_state_synchronize_rcu() and
   same_state_synchronize_rcu_full() allow grace-period state values to
   be compared for equality. This permits users to maintain lists of
   data structures having the same state value, removing the need for
   per-data-structure grace-period state values, thus decreasing memory
   footprint.

 - Polled SRCU grace-period updates, including adding tests to
   rcutorture and reducing the incidence of Tiny SRCU grace-period-state
   counter wrap.

 - Improve Tasks RCU diagnostics and quiescent-state detection.

* tag 'rcu.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (55 commits)
  rcutorture: Use the barrier operation specified by cur_ops
  rcu-tasks: Make RCU Tasks Trace check for userspace execution
  rcu-tasks: Ensure RCU Tasks Trace loops have quiescent states
  rcu-tasks: Convert RCU_LOCKDEP_WARN() to WARN_ONCE()
  srcu: Make Tiny SRCU use full-sized grace-period counters
  srcu: Make Tiny SRCU poll_state_synchronize_srcu() more precise
  srcu: Add GP and maximum requested GP to Tiny SRCU rcutorture output
  rcutorture: Make "srcud" option also test polled grace-period API
  rcutorture: Limit read-side polling-API testing
  rcu: Add functions to compare grace-period state values
  rcutorture: Expand rcu_torture_write_types() first "if" statement
  rcutorture: Use 1-suffixed variable in rcu_torture_write_types() check
  rcu: Make synchronize_rcu() fastpath update only boot-CPU counters
  rcutorture: Adjust rcu_poll_need_2gp() for rcu_gp_oldstate field removal
  rcu: Remove ->rgos_polled field from rcu_gp_oldstate structure
  rcu: Make synchronize_rcu_expedited() fast path update .expedited_sequence
  rcu: Remove expedited grace-period fast-path forward-progress helper
  rcu: Make synchronize_rcu() fast path update ->gp_seq counters
  rcu-tasks: Remove grace-period fast-path rcu-tasks helper
  rcu: Set rcu_data structures' initial ->gpwrap value to true
  ...
 2022-10-03 10:11:11 -07:00
Peter Zijlstra
5aec788aeb sched: Fix TASK_state comparisons 
Task state is fundamentally a bitmask; direct comparisons are probably
not working as intended. Specifically the normal wait-state have
a number of possible modifiers:

  TASK_UNINTERRUPTIBLE:	TASK_WAKEKILL, TASK_NOLOAD, TASK_FREEZABLE
  TASK_INTERRUPTIBLE:   TASK_FREEZABLE

Specifically, the addition of TASK_FREEZABLE wrecked
__wait_is_interruptible(). This however led to an audit of direct
comparisons yielding the rest of the changes.

Fixes: f5d39b0208 ("freezer,sched: Rewrite core freezer logic")
Reported-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Debugged-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
 2022-09-28 10:00:16 +02:00
Matthew Wilcox (Oracle)
0cd4d02c32 sched: use maple tree iterator to walk VMAs 
The linked list is slower than walking the VMAs using the maple tree.  We
can't use the VMA iterator here because it doesn't support moving to an
earlier position.

Link: https://lkml.kernel.org/r/20220906194824.2110408-49-Liam.Howlett@oracle.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2022-09-26 19:46:22 -07:00
Aneesh Kumar K.V
467b171af8 mm/demotion: update node_is_toptier to work with memory tiers 
With memory tier support we can have memory only NUMA nodes in the top
tier from which we want to avoid promotion tracking NUMA faults.  Update
node_is_toptier to work with memory tiers.  All NUMA nodes are by default
top tier nodes.  With lower(slower) memory tiers added we consider all
memory tiers above a memory tier having CPU NUMA nodes as a top memory
tier

[sj@kernel.org: include missed header file, memory-tiers.h]
  Link: https://lkml.kernel.org/r/20220820190720.248704-1-sj@kernel.org
[akpm@linux-foundation.org: mm/memory.c needs linux/memory-tiers.h]
[aneesh.kumar@linux.ibm.com: make toptier_distance inclusive upper bound of toptiers]
  Link: https://lkml.kernel.org/r/20220830081457.118960-1-aneesh.kumar@linux.ibm.com
Link: https://lkml.kernel.org/r/20220818131042.113280-10-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Wei Xu <weixugc@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hesham Almatary <hesham.almatary@huawei.com>
Cc: Jagdish Gediya <jvgediya.oss@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2022-09-26 19:46:12 -07:00
Yu Zhao
bd74fdaea1 mm: multi-gen LRU: support page table walks 
To further exploit spatial locality, the aging prefers to walk page tables
to search for young PTEs and promote hot pages.  A kill switch will be
added in the next patch to disable this behavior.  When disabled, the
aging relies on the rmap only.

NB: this behavior has nothing similar with the page table scanning in the
2.4 kernel [1], which searches page tables for old PTEs, adds cold pages
to swapcache and unmaps them.

To avoid confusion, the term "iteration" specifically means the traversal
of an entire mm_struct list; the term "walk" will be applied to page
tables and the rmap, as usual.

An mm_struct list is maintained for each memcg, and an mm_struct follows
its owner task to the new memcg when this task is migrated.  Given an
lruvec, the aging iterates lruvec_memcg()->mm_list and calls
walk_page_range() with each mm_struct on this list to promote hot pages
before it increments max_seq.

When multiple page table walkers iterate the same list, each of them gets
a unique mm_struct; therefore they can run concurrently.  Page table
walkers ignore any misplaced pages, e.g., if an mm_struct was migrated,
pages it left in the previous memcg will not be promoted when its current
memcg is under reclaim.  Similarly, page table walkers will not promote
pages from nodes other than the one under reclaim.

This patch uses the following optimizations when walking page tables:
1. It tracks the usage of mm_struct's between context switches so that
   page table walkers can skip processes that have been sleeping since
   the last iteration.
2. It uses generational Bloom filters to record populated branches so
   that page table walkers can reduce their search space based on the
   query results, e.g., to skip page tables containing mostly holes or
   misplaced pages.
3. It takes advantage of the accessed bit in non-leaf PMD entries when
   CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y.
4. It does not zigzag between a PGD table and the same PMD table
   spanning multiple VMAs. IOW, it finishes all the VMAs within the
   range of the same PMD table before it returns to a PGD table. This
   improves the cache performance for workloads that have large
   numbers of tiny VMAs [2], especially when CONFIG_PGTABLE_LEVELS=5.

Server benchmark results:
  Single workload:
    fio (buffered I/O): no change

  Single workload:
    memcached (anon): +[8, 10]%
                Ops/sec      KB/sec
      patch1-7: 1147696.57   44640.29
      patch1-8: 1245274.91   48435.66

  Configurations:
    no change

Client benchmark results:
  kswapd profiles:
    patch1-7
      48.16%  lzo1x_1_do_compress (real work)
       8.20%  page_vma_mapped_walk (overhead)
       7.06%  _raw_spin_unlock_irq
       2.92%  ptep_clear_flush
       2.53%  __zram_bvec_write
       2.11%  do_raw_spin_lock
       2.02%  memmove
       1.93%  lru_gen_look_around
       1.56%  free_unref_page_list
       1.40%  memset

    patch1-8
      49.44%  lzo1x_1_do_compress (real work)
       6.19%  page_vma_mapped_walk (overhead)
       5.97%  _raw_spin_unlock_irq
       3.13%  get_pfn_folio
       2.85%  ptep_clear_flush
       2.42%  __zram_bvec_write
       2.08%  do_raw_spin_lock
       1.92%  memmove
       1.44%  alloc_zspage
       1.36%  memset

  Configurations:
    no change

Thanks to the following developers for their efforts [3].
  kernel test robot <lkp@intel.com>

[1] https://lwn.net/Articles/23732/
[2] https://llvm.org/docs/ScudoHardenedAllocator.html
[3] https://lore.kernel.org/r/202204160827.ekEARWQo-lkp@intel.com/

Link: https://lkml.kernel.org/r/20220918080010.2920238-9-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2022-09-26 19:46:09 -07:00
Christoph Hellwig
527eb453bb sched/psi: export psi_memstall_{enter,leave} 
To properly account for all refaults from file system logic, file systems
need to call psi_memstall_enter directly, so export it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220915094200.139713-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
 2022-09-20 08:24:38 -06:00
Vincent Guittot
7e9518baed sched/fair: Move call to list_last_entry() in detach_tasks 
Move the call to list_last_entry() in detach_tasks() after testing
loop_max and loop_break.

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220825122726.20819-4-vincent.guittot@linaro.org
 2022-09-15 16:13:52 +02:00
Vincent Guittot
c59862f826 sched/fair: Cleanup loop_max and loop_break 
sched_nr_migrate_break is set to a fix value and never changes so we can
replace it by a define SCHED_NR_MIGRATE_BREAK.

Also, we adjust SCHED_NR_MIGRATE_BREAK to be aligned with the init value
of sysctl_sched_nr_migrate which can be init to different values.

Then, use SCHED_NR_MIGRATE_BREAK to init sysctl_sched_nr_migrate.

The behavior stays unchanged unless you modify sysctl_sched_nr_migrate
trough debugfs.

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220825122726.20819-3-vincent.guittot@linaro.org
 2022-09-15 16:13:51 +02:00
Vincent Guittot
b0defa7ae0 sched/fair: Make sure to try to detach at least one movable task 
During load balance, we try at most env->loop_max time to move a task.
But it can happen that the loop_max LRU tasks (ie tail of
the cfs_tasks list) can't be moved to dst_cpu because of affinity.
In this case, loop in the list until we found at least one.

The maximum of detached tasks remained the same as before.

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220825122726.20819-2-vincent.guittot@linaro.org
 2022-09-15 16:13:51 +02:00
Huang Ying
c959924b0d memory tiering: adjust hot threshold automatically 
The promotion hot threshold is workload and system configuration
dependent.  So in this patch, a method to adjust the hot threshold
automatically is implemented.  The basic idea is to control the number of
the candidate promotion pages to match the promotion rate limit.  If the
hint page fault latency of a page is less than the hot threshold, we will
try to promote the page, and the page is called the candidate promotion
page.

If the number of the candidate promotion pages in the statistics interval
is much more than the promotion rate limit, the hot threshold will be
decreased to reduce the number of the candidate promotion pages. 
Otherwise, the hot threshold will be increased to increase the number of
the candidate promotion pages.

To make the above method works, in each statistics interval, the total
number of the pages to check (on which the hint page faults occur) and the
hot/cold distribution need to be stable.  Because the page tables are
scanned linearly in NUMA balancing, but the hot/cold distribution isn't
uniform along the address usually, the statistics interval should be
larger than the NUMA balancing scan period.  So in the patch, the max scan
period is used as statistics interval and it works well in our tests.

Link: https://lkml.kernel.org/r/20220713083954.34196-4-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: osalvador <osalvador@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2022-09-11 20:25:54 -07:00
Huang Ying
c6833e1000 memory tiering: rate limit NUMA migration throughput 
In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.

A choice is to promote/demote as fast as possible.  But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.

A way to resolve this issue is to restrict the max promoting/demoting
throughput.  It will take longer to finish the promoting/demoting.  But
the workload latency will be better.  This is implemented in this patch as
the page promotion rate limit mechanism.

The number of the candidate pages to be promoted to the fast memory node
via NUMA balancing is counted, if the count exceeds the limit specified by
the users, the NUMA balancing promotion will be stopped until the next
second.

A new sysctl knob kernel.numa_balancing_promote_rate_limit_MBps is added
for the users to specify the limit.

Link: https://lkml.kernel.org/r/20220713083954.34196-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: osalvador <osalvador@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2022-09-11 20:25:54 -07:00
Huang Ying
33024536ba memory tiering: hot page selection with hint page fault latency 
Patch series "memory tiering: hot page selection", v4.

To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory nodes need to be identified. 
Essentially, the original NUMA balancing implementation selects the mostly
recently accessed (MRU) pages to promote.  But this isn't a perfect
algorithm to identify the hot pages.  Because the pages with quite low
access frequency may be accessed eventually given the NUMA balancing page
table scanning period could be quite long (e.g.  60 seconds).  So in this
patchset, we implement a new hot page identification algorithm based on
the latency between NUMA balancing page table scanning and hint page
fault.  Which is a kind of mostly frequently accessed (MFU) algorithm.

In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.

A choice is to promote/demote as fast as possible.  But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.

A way to resolve this issue is to restrict the max promoting/demoting
throughput.  It will take longer to finish the promoting/demoting.  But
the workload latency will be better.  This is implemented in this patchset
as the page promotion rate limit mechanism.

The promotion hot threshold is workload and system configuration
dependent.  So in this patchset, a method to adjust the hot threshold
automatically is implemented.  The basic idea is to control the number of
the candidate promotion pages to match the promotion rate limit.

We used the pmbench memory accessing benchmark tested the patchset on a
2-socket server system with DRAM and PMEM installed.  The test results are
as follows,

		pmbench score		promote rate
		 (accesses/s)			MB/s
		-------------		------------
base		  146887704.1		       725.6
hot selection     165695601.2		       544.0
rate limit	  162814569.8		       165.2
auto adjustment	  170495294.0                  136.9

From the results above,

With hot page selection patch [1/3], the pmbench score increases about
12.8%, and promote rate (overhead) decreases about 25.0%, compared with
base kernel.

With rate limit patch [2/3], pmbench score decreases about 1.7%, and
promote rate decreases about 69.6%, compared with hot page selection
patch.

With threshold auto adjustment patch [3/3], pmbench score increases about
4.7%, and promote rate decrease about 17.1%, compared with rate limit
patch.

Baolin helped to test the patchset with MySQL on a machine which contains
1 DRAM node (30G) and 1 PMEM node (126G).

sysbench /usr/share/sysbench/oltp_read_write.lua \
......
--tables=200 \
--table-size=1000000 \
--report-interval=10 \
--threads=16 \
--time=120

The tps can be improved about 5%.


This patch (of 3):

To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory node need to be identified.  Essentially,
the original NUMA balancing implementation selects the mostly recently
accessed (MRU) pages to promote.  But this isn't a perfect algorithm to
identify the hot pages.  Because the pages with quite low access frequency
may be accessed eventually given the NUMA balancing page table scanning
period could be quite long (e.g.  60 seconds).  The most frequently
accessed (MFU) algorithm is better.

So, in this patch we implemented a better hot page selection algorithm. 
Which is based on NUMA balancing page table scanning and hint page fault
as follows,

- When the page tables of the processes are scanned to change PTE/PMD
  to be PROT_NONE, the current time is recorded in struct page as scan
  time.

- When the page is accessed, hint page fault will occur.  The scan
  time is gotten from the struct page.  And The hint page fault
  latency is defined as

    hint page fault time - scan time

The shorter the hint page fault latency of a page is, the higher the
probability of their access frequency to be higher.  So the hint page
fault latency is a better estimation of the page hot/cold.

It's hard to find some extra space in struct page to hold the scan time. 
Fortunately, we can reuse some bits used by the original NUMA balancing.

NUMA balancing uses some bits in struct page to store the page accessing
CPU and PID (referring to page_cpupid_xchg_last()).  Which is used by the
multi-stage node selection algorithm to avoid to migrate pages shared
accessed by the NUMA nodes back and forth.  But for pages in the slow
memory node, even if they are shared accessed by multiple NUMA nodes, as
long as the pages are hot, they need to be promoted to the fast memory
node.  So the accessing CPU and PID information are unnecessary for the
slow memory pages.  We can reuse these bits in struct page to record the
scan time.  For the fast memory pages, these bits are used as before.

For the hot threshold, the default value is 1 second, which works well in
our performance test.  All pages with hint page fault latency < hot
threshold will be considered hot.

It's hard for users to determine the hot threshold.  So we don't provide a
kernel ABI to set it, just provide a debugfs interface for advanced users
to experiment.  We will continue to work on a hot threshold automatic
adjustment mechanism.

The downside of the above method is that the response time to the workload
hot spot changing may be much longer.  For example,

- A previous cold memory area becomes hot

- The hint page fault will be triggered.  But the hint page fault
  latency isn't shorter than the hot threshold.  So the pages will
  not be promoted.

- When the memory area is scanned again, maybe after a scan period,
  the hint page fault latency measured will be shorter than the hot
  threshold and the pages will be promoted.

To mitigate this, if there are enough free space in the fast memory node,
the hot threshold will not be used, all pages will be promoted upon the
hint page fault for fast response.

Thanks Zhong Jiang reported and tested the fix for a bug when disabling
memory tiering mode dynamically.

Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: osalvador <osalvador@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2022-09-11 20:25:54 -07:00
Linus Torvalds
e35be05d74 Driver core fixes for 6.0-rc5 
Here are some small driver core and debugfs fixes for 6.0-rc5.
 
 Included in here are:
   - multiple attempts to get the arch_topology code to work properly on
     non-cluster SMT systems.  First attempt caused build breakages in
     linux-next and 0-day, second try worked.
   - debugfs fixes for a long-suffering memory leak.  The pattern of
     debugfs_remove(debugfs_lookup(...)) turns out to leak dentries, so
     add debugfs_lookup_and_remove() to fix this problem.  Also fix up
     the scheduler debug code that highlighted this problem.  Fixes for
     other subsystems will be trickling in over the next few months for
     this same issue once the debugfs function is merged.
 
 All of these have been in linux-next since Wednesday with no reported
 problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYxuERw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylPqwCgjU6xlN2y/80HH+66k+yyzlxocE8AoLPgnGrA
 dJZIGWFXExzO26tvMT52
 =zGHA
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are some small driver core and debugfs fixes for 6.0-rc5.

  Included in here are:

   - multiple attempts to get the arch_topology code to work properly on
     non-cluster SMT systems. First attempt caused build breakages in
     linux-next and 0-day, second try worked.

   - debugfs fixes for a long-suffering memory leak. The pattern of
     debugfs_remove(debugfs_lookup(...)) turns out to leak dentries, so
     add debugfs_lookup_and_remove() to fix this problem. Also fix up
     the scheduler debug code that highlighted this problem. Fixes for
     other subsystems will be trickling in over the next few months for
     this same issue once the debugfs function is merged.

  All of these have been in linux-next since Wednesday with no reported
  problems"

* tag 'driver-core-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  arch_topology: Make cluster topology span at least SMT CPUs
  sched/debug: fix dentry leak in update_sched_domain_debugfs
  debugfs: add debugfs_lookup_and_remove()
  driver core: fix driver_set_override() issue with empty strings
  Revert "arch_topology: Make cluster topology span at least SMT CPUs"
  arch_topology: Make cluster topology span at least SMT CPUs
 2022-09-09 15:08:40 -04:00
Chengming Zhou
34f26a1561 sched/psi: Per-cgroup PSI accounting disable/re-enable interface 
PSI accounts stalls for each cgroup separately and aggregates it
at each level of the hierarchy. This may cause non-negligible overhead
for some workloads when under deep level of the hierarchy.

commit 3958e2d0c3 ("cgroup: make per-cgroup pressure stall tracking configurable")
make PSI to skip per-cgroup stall accounting, only account system-wide
to avoid this each level overhead.

But for our use case, we also want leaf cgroup PSI stats accounted for
userspace adjustment on that cgroup, apart from only system-wide adjustment.

So this patch introduce a per-cgroup PSI accounting disable/re-enable
interface "cgroup.pressure", which is a read-write single value file that
allowed values are "0" and "1", the defaults is "1" so per-cgroup
PSI stats is enabled by default.

Implementation details:

It should be relatively straight-forward to disable and re-enable
state aggregation, time tracking, averaging on a per-cgroup level,
if we can live with losing history from while it was disabled.
I.e. the avgs will restart from 0, total= will have gaps.

But it's hard or complex to stop/restart groupc->tasks[] updates,
which is not implemented in this patch. So we always update
groupc->tasks[] and PSI_ONCPU bit in psi_group_change() even when
the cgroup PSI stats is disabled.

Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/20220907090332.2078-1-zhouchengming@bytedance.com
 2022-09-09 11:08:33 +02:00
Chengming Zhou
dc86aba751 sched/psi: Cache parent psi_group to speed up group iteration 
We use iterate_groups() to iterate each level psi_group to update
PSI stats, which is a very hot path.

In current code, iterate_groups() have to use multiple branches and
cgroup_parent() to get parent psi_group for each level, which is not
very efficient.

This patch cache parent psi_group in struct psi_group, only need to get
psi_group of task itself first, then just use group->parent to iterate.

Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220825164111.29534-10-zhouchengming@bytedance.com
 2022-09-09 11:08:33 +02:00
Chengming Zhou
52b1364ba0 sched/psi: Add PSI_IRQ to track IRQ/SOFTIRQ pressure 
Now PSI already tracked workload pressure stall information for
CPU, memory and IO. Apart from these, IRQ/SOFTIRQ could have
obvious impact on some workload productivity, such as web service
workload.

When CONFIG_IRQ_TIME_ACCOUNTING, we can get IRQ/SOFTIRQ delta time
from update_rq_clock_task(), in which we can record that delta
to CPU curr task's cgroups as PSI_IRQ_FULL status.

Note we don't use PSI_IRQ_SOME since IRQ/SOFTIRQ always happen in
the current task on the CPU, make nothing productive could run
even if it were runnable, so we only use PSI_IRQ_FULL.

Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220825164111.29534-8-zhouchengming@bytedance.com
 2022-09-09 11:08:32 +02:00
Johannes Weiner
71dbdde791 sched/psi: Remove NR_ONCPU task accounting 
We put all fields updated by the scheduler in the first cacheline of
struct psi_group_cpu for performance.

Since we want add another PSI_IRQ_FULL to track IRQ/SOFTIRQ pressure,
we need to reclaim space first. This patch remove NR_ONCPU task accounting
in struct psi_group_cpu, use one bit in state_mask to track instead.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20220825164111.29534-7-zhouchengming@bytedance.com
 2022-09-09 11:08:32 +02:00
Chengming Zhou
65176f59a1 sched/psi: Optimize task switch inside shared cgroups again 
Way back when PSI_MEM_FULL was accounted from the timer tick, task
switching could simply iterate next and prev to the common ancestor to
update TSK_ONCPU and be done.

Then memstall ticks were replaced with checking curr->in_memstall
directly in psi_group_change(). That meant that now if the task switch
was between a memstall and a !memstall task, we had to iterate through
the common ancestors at least ONCE to fix up their state_masks.

We added the identical_state filter to make sure the common ancestor
elimination was skipped in that case. It seems that was always a
little too eager, because it caused us to walk the common ancestors
*twice* instead of the required once: the iteration for next could
have stopped at the common ancestor; prev could have updated TSK_ONCPU
up to the common ancestor, then finish to the root without changing
any flags, just to get the new curr->in_memstall into the state_masks.

This patch recognizes this and makes it so that we walk to the root
exactly once if state_mask needs updating, which is simply catching up
on a missed optimization that could have been done in commit 7fae6c8171
("psi: Use ONCPU state tracking machinery to detect reclaim") directly.

Apart from this, it's also necessary for the next patch "sched/psi: remove
NR_ONCPU task accounting". Suppose we walk the common ancestors twice:

(1) psi_group_change(.clear = 0, .set = TSK_ONCPU)
(2) psi_group_change(.clear = TSK_ONCPU, .set = 0)

We previously used tasks[NR_ONCPU] to record TSK_ONCPU, tasks[NR_ONCPU]++
in (1) then tasks[NR_ONCPU]-- in (2), so tasks[NR_ONCPU] still be correct.

The next patch change to use one bit in state mask to record TSK_ONCPU,
PSI_ONCPU bit will be set in (1), but then be cleared in (2), which cause
the psi_group_cpu has task running on CPU but without PSI_ONCPU bit set!

With this patch, we will never walk the common ancestors twice, so won't
have above problem.

Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220825164111.29534-6-zhouchengming@bytedance.com
 2022-09-09 11:08:32 +02:00
Chengming Zhou
d79ddb069c sched/psi: Move private helpers to sched/stats.h 
This patch move psi_task_change/psi_task_switch declarations out of
PSI public header, since they are only needed for implementing the
PSI stats tracking in sched/stats.h

psi_task_switch is obvious, psi_task_change can't be public helper
since it doesn't check psi_disabled static key. And there is no
any user now, so put it in sched/stats.h too.

Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220825164111.29534-5-zhouchengming@bytedance.com
 2022-09-09 11:08:31 +02:00
Chengming Zhou
e2ad8ab04c sched/psi: Save percpu memory when !psi_cgroups_enabled 
We won't use cgroup psi_group when !psi_cgroups_enabled, so don't
bother to alloc percpu memory and init for it.

Also don't need to migrate task PSI stats between cgroups in
cgroup_move_task().

Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220825164111.29534-4-zhouchengming@bytedance.com
 2022-09-09 11:08:31 +02:00
Chengming Zhou
c530a3c716 sched/psi: Fix periodic aggregation shut off 
We don't want to wake periodic aggregation work back up if the
task change is the aggregation worker itself going to sleep, or
we'll ping-pong forever.

Previously, we would use psi_task_change() in psi_dequeue() when
task going to sleep, so this check was put in psi_task_change().

But commit 4117cebf1a ("psi: Optimize task switch inside shared cgroups")
defer task sleep handling to psi_task_switch(), won't go through
psi_task_change() anymore.

So this patch move this check to psi_task_switch().

Fixes: 4117cebf1a ("psi: Optimize task switch inside shared cgroups")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220825164111.29534-2-zhouchengming@bytedance.com
 2022-09-09 11:08:30 +02:00
Peter Zijlstra
f5d39b0208 freezer,sched: Rewrite core freezer logic 
Rewrite the core freezer to behave better wrt thawing and be simpler
in general.

By replacing PF_FROZEN with TASK_FROZEN, a special block state, it is
ensured frozen tasks stay frozen until thawed and don't randomly wake
up early, as is currently possible.

As such, it does away with PF_FROZEN and PF_FREEZER_SKIP, freeing up
two PF_flags (yay!).

Specifically; the current scheme works a little like:

	freezer_do_not_count();
	schedule();
	freezer_count();

And either the task is blocked, or it lands in try_to_freezer()
through freezer_count(). Now, when it is blocked, the freezer
considers it frozen and continues.

However, on thawing, once pm_freezing is cleared, freezer_count()
stops working, and any random/spurious wakeup will let a task run
before its time.

That is, thawing tries to thaw things in explicit order; kernel
threads and workqueues before doing bringing SMP back before userspace
etc.. However due to the above mentioned races it is entirely possible
for userspace tasks to thaw (by accident) before SMP is back.

This can be a fatal problem in asymmetric ISA architectures (eg ARMv9)
where the userspace task requires a special CPU to run.

As said; replace this with a special task state TASK_FROZEN and add
the following state transitions:

	TASK_FREEZABLE	-> TASK_FROZEN
	__TASK_STOPPED	-> TASK_FROZEN
	__TASK_TRACED	-> TASK_FROZEN

The new TASK_FREEZABLE can be set on any state part of TASK_NORMAL
(IOW. TASK_INTERRUPTIBLE and TASK_UNINTERRUPTIBLE) -- any such state
is already required to deal with spurious wakeups and the freezer
causes one such when thawing the task (since the original state is
lost).

The special __TASK_{STOPPED,TRACED} states *can* be restored since
their canonical state is in ->jobctl.

With this, frozen tasks need an explicit TASK_FROZEN wakeup and are
free of undue (early / spurious) wakeups.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220822114649.055452969@infradead.org
 2022-09-07 21:53:50 +02:00
Peter Zijlstra
929659acea sched/completion: Add wait_for_completion_state() 
Allows waiting with a custom @state.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20220822114648.922711674@infradead.org
 2022-09-07 21:53:49 +02:00
Peter Zijlstra
f9fc8cad97 sched: Add TASK_ANY for wait_task_inactive() 
Now that wait_task_inactive()'s @match_state argument is a mask (like
ttwu()) it is possible to replace the special !match_state case with
an 'all-states' value such that any blocked state will match.

Suggested-by: Ingo Molnar (mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YxhkzfuFTvRnpUaH@hirez.programming.kicks-ass.net
 2022-09-07 21:53:49 +02:00
Peter Zijlstra
9204a97f7a sched: Change wait_task_inactive()s match_state 
Make wait_task_inactive()'s @match_state work like ttwu()'s @state.

That is, instead of an equal comparison, use it as a mask. This allows
matching multiple block conditions.

(removes the unlikely; it doesn't make sense how it's only part of the
condition)

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220822114648.856734578@infradead.org
 2022-09-07 21:53:48 +02:00
Peter Zijlstra
0b9d46fc5e sched: Rename task_running() to task_on_cpu() 
There is some ambiguity about task_running() in that it is unrelated
to TASK_RUNNING but instead tests ->on_cpu. As such, rename the thing
task_on_cpu().

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/Yxhkhn55uHZx+NGl@hirez.programming.kicks-ass.net
 2022-09-07 21:53:47 +02:00
Abel Wu
96c1c0cfe4 sched/fair: Cleanup for SIS_PROP 
The sched-domain of this cpu is only used for some heuristics when
SIS_PROP is enabled, and it should be irrelevant whether the local
sd_llc is valid or not, since all we care about is target sd_llc
if !SIS_PROP.

Access the local domain only when there is a need.

Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20220907112000.1854-6-wuyun.abel@bytedance.com
 2022-09-07 21:53:47 +02:00
Abel Wu
398ba2b0cc sched/fair: Default to false in test_idle_cores() 
It's uncertain whether idle cores exist or not if shared sched-
domains are not ready, so returning "no idle cores" usually
makes sense.

While __update_idle_core() is an exception, it checks status
of this core and set hint to shared sched-domain if necessary.
So the whole logic of this function depends on the existence
of shared sched-domain, and can certainly bail out early if
it is not available.

It's somehow a little tricky, and as Josh suggested that it
should be transient while the domain isn't ready. So remove
the self-defined default value to make things more clearer.

Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Don <joshdon@google.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20220907112000.1854-5-wuyun.abel@bytedance.com
 2022-09-07 21:53:47 +02:00
Abel Wu
8eeeed9c4a sched/fair: Remove useless check in select_idle_core() 
The function select_idle_core() only gets called when has_idle_cores
is true which can be possible only when sched_smt_present is enabled.

This change also aligns select_idle_core() with select_idle_smt() in
the way that the caller do the check if necessary.

Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20220907112000.1854-4-wuyun.abel@bytedance.com
 2022-09-07 21:53:46 +02:00
Abel Wu
b9bae70440 sched/fair: Avoid double search on same cpu 
The prev cpu is checked at the beginning of SIS, and it's unlikely
to be idle before the second check in select_idle_smt(). So we'd
better focus on its SMT siblings.

Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Don <joshdon@google.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20220907112000.1854-3-wuyun.abel@bytedance.com
 2022-09-07 21:53:46 +02:00
Abel Wu
3e6efe87cd sched/fair: Remove redundant check in select_idle_smt() 
If two cpus share LLC cache, then the two cores they belong to
are also in the same LLC domain.

Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Don <joshdon@google.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20220907112000.1854-2-wuyun.abel@bytedance.com
 2022-09-07 21:53:46 +02:00
Greg Kroah-Hartman
c2e4065965 sched/debug: fix dentry leak in update_sched_domain_debugfs 
Kuyo reports that the pattern of using debugfs_remove(debugfs_lookup())
leaks a dentry and with a hotplug stress test, the machine eventually
runs out of memory.

Fix this up by using the newly created debugfs_lookup_and_remove() call
instead which properly handles the dentry reference counting logic.

Cc: Major Chen <major.chen@samsung.com>
Cc: stable <stable@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Reported-by: Kuyo Chang <kuyo.chang@mediatek.com>
Tested-by: Kuyo Chang <kuyo.chang@mediatek.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220902123107.109274-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2022-09-05 13:02:38 +02:00
Shang XiaoJing
33f9352579 sched/deadline: Move __dl_clear_params out of dl_bw lock 
As members in sched_dl_entity are independent with dl_bw, move
__dl_clear_params out of dl_bw lock.

Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Link: https://lore.kernel.org/r/20220827020911.30641-1-shangxiaojing@huawei.com
 2022-09-01 11:19:55 +02:00
Shang XiaoJing
96458e7f7d sched/deadline: Add replenish_dl_new_period helper 
Wrap repeated code in helper function replenish_dl_new_period, which set
the deadline and runtime of input dl_se based on pi_of(dl_se). Note that
setup_new_dl_entity originally set the deadline and runtime base on
dl_se, which should equals to pi_of(dl_se) for non-boosted task.

Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Link: https://lore.kernel.org/r/20220826100037.12146-1-shangxiaojing@huawei.com
 2022-09-01 11:19:54 +02:00
Shang XiaoJing
973bee493a sched/deadline: Add dl_task_is_earliest_deadline helper 
Wrap repeated code in helper function dl_task_is_earliest_deadline, which
return true if there is no deadline task on the rq at all, or task's
deadline earlier than the whole rq.

Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Link: https://lore.kernel.org/r/20220826083453.698-1-shangxiaojing@huawei.com
 2022-09-01 11:19:54 +02:00
Zhen Lei
bc1cca97e6 sched/debug: Show the registers of 'current' in dump_cpu_task() 
The dump_cpu_task() function does not print registers on architectures
that do not support NMIs.  However, registers can be useful for
debugging.  Fortunately, in the case where dump_cpu_task() is invoked
from an interrupt handler and is dumping the current CPU's stack, the
get_irq_regs() function can be used to get the registers.

Therefore, this commit makes dump_cpu_task() check to see if it is being
asked to dump the current CPU's stack from within an interrupt handler,
and, if so, it uses the get_irq_regs() function to obtain the registers.
On systems that do support NMIs, this commit has the further advantage
of avoiding a self-NMI in this case.

This is an example of rcu self-detected stall on arm64, which does not
support NMIs:
[   27.501721] rcu: INFO: rcu_preempt self-detected stall on CPU
[   27.502238] rcu:     0-....: (1250 ticks this GP) idle=4f7/1/0x4000000000000000 softirq=2594/2594 fqs=619
[   27.502632]  (t=1251 jiffies g=2989 q=29 ncpus=4)
[   27.503845] CPU: 0 PID: 306 Comm: test0 Not tainted 5.19.0-rc7-00009-g1c1a6c29ff99-dirty #46
[   27.504732] Hardware name: linux,dummy-virt (DT)
[   27.504947] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   27.504998] pc : arch_counter_read+0x18/0x24
[   27.505301] lr : arch_counter_read+0x18/0x24
[   27.505328] sp : ffff80000b29bdf0
[   27.505345] x29: ffff80000b29bdf0 x28: 0000000000000000 x27: 0000000000000000
[   27.505475] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[   27.505553] x23: 0000000000001f40 x22: ffff800009849c48 x21: 000000065f871ae0
[   27.505627] x20: 00000000000025ec x19: ffff80000a6eb300 x18: ffffffffffffffff
[   27.505654] x17: 0000000000000001 x16: 0000000000000000 x15: ffff80000a6d0296
[   27.505681] x14: ffffffffffffffff x13: ffff80000a29bc18 x12: 0000000000000426
[   27.505709] x11: 0000000000000162 x10: ffff80000a2f3c18 x9 : ffff80000a29bc18
[   27.505736] x8 : 00000000ffffefff x7 : ffff80000a2f3c18 x6 : 00000000759bd013
[   27.505761] x5 : 01ffffffffffffff x4 : 0002dc6c00000000 x3 : 0000000000000017
[   27.505787] x2 : 00000000000025ec x1 : ffff80000b29bdf0 x0 : 0000000075a30653
[   27.505937] Call trace:
[   27.506002]  arch_counter_read+0x18/0x24
[   27.506171]  ktime_get+0x48/0xa0
[   27.506207]  test_task+0x70/0xf0
[   27.506227]  kthread+0x10c/0x110
[   27.506243]  ret_from_fork+0x10/0x20

This is a marked improvement over the old output:
[   27.944550] rcu: INFO: rcu_preempt self-detected stall on CPU
[   27.944980] rcu:     0-....: (1249 ticks this GP) idle=cbb/1/0x4000000000000000 softirq=2610/2610 fqs=614
[   27.945407]  (t=1251 jiffies g=2681 q=28 ncpus=4)
[   27.945731] Task dump for CPU 0:
[   27.945844] task:test0           state:R  running task     stack:    0 pid:  306 ppid:     2 flags:0x0000000a
[   27.946073] Call trace:
[   27.946151]  dump_backtrace.part.0+0xc8/0xd4
[   27.946378]  show_stack+0x18/0x70
[   27.946405]  sched_show_task+0x150/0x180
[   27.946427]  dump_cpu_task+0x44/0x54
[   27.947193]  rcu_dump_cpu_stacks+0xec/0x130
[   27.947212]  rcu_sched_clock_irq+0xb18/0xef0
[   27.947231]  update_process_times+0x68/0xac
[   27.947248]  tick_sched_handle+0x34/0x60
[   27.947266]  tick_sched_timer+0x4c/0xa4
[   27.947281]  __hrtimer_run_queues+0x178/0x360
[   27.947295]  hrtimer_interrupt+0xe8/0x244
[   27.947309]  arch_timer_handler_virt+0x38/0x4c
[   27.947326]  handle_percpu_devid_irq+0x88/0x230
[   27.947342]  generic_handle_domain_irq+0x2c/0x44
[   27.947357]  gic_handle_irq+0x44/0xc4
[   27.947376]  call_on_irq_stack+0x2c/0x54
[   27.947415]  do_interrupt_handler+0x80/0x94
[   27.947431]  el1_interrupt+0x34/0x70
[   27.947447]  el1h_64_irq_handler+0x18/0x24
[   27.947462]  el1h_64_irq+0x64/0x68                       <--- the above backtrace is worthless
[   27.947474]  arch_counter_read+0x18/0x24
[   27.947487]  ktime_get+0x48/0xa0
[   27.947501]  test_task+0x70/0xf0
[   27.947520]  kthread+0x10c/0x110
[   27.947538]  ret_from_fork+0x10/0x20

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Valentin Schneider <vschneid@redhat.com>
 2022-08-31 05:05:49 -07:00
Zhen Lei
e73dfe3093 sched/debug: Try trigger_single_cpu_backtrace(cpu) in dump_cpu_task() 
The trigger_all_cpu_backtrace() function attempts to send an NMI to the
target CPU, which usually provides much better stack traces than the
dump_cpu_task() function's approach of dumping that stack from some other
CPU.  So much so that most calls to dump_cpu_task() only happen after
a call to trigger_all_cpu_backtrace() has failed.  And the exception to
this rule really should attempt to use trigger_all_cpu_backtrace() first.

Therefore, move the trigger_all_cpu_backtrace() invocation into
dump_cpu_task().

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Valentin Schneider <vschneid@redhat.com>
 2022-08-31 05:03:14 -07:00
Ingo Molnar
53aa930dc4 Merge branch 'sched/warnings' into sched/core, to pick up WARN_ON_ONCE() conversion commit 
Merge in the BUG_ON() => WARN_ON_ONCE() conversion commit.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
 2022-08-30 10:28:15 +02:00