Commit Graph

2696 Commits

Author SHA1 Message Date
Mircea Caprioru
17b90e6a0d staging: iio: adc: ad7192: Fix identation
This patch fixes the odd indentation inside function ad7192_calibrate_all.

Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04 20:19:59 +01:00
Daniela Mormocea
7782c3c93d staging: iio: Line over 80 characters
Fix line over 80 characters, warning by checkpatch

Signed-off-by: Daniela Mormocea <daniela.mormocea@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-18 07:05:19 +01:00
Beniamin Bia
8e8040c52e staging: iio: frequency: ad9833: Load clock using clock framework
The clock frequency is loaded from device-tree using clock framework
instead of statically value. The change allow configuration of
the device via device-trees and better initialization sequence.
This is part of broader effort to add device-tree support to this driver
and take it out from staging.

Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-02-02 17:06:49 +00:00
Beniamin Bia
80109c3234 staging: iio: frequency: ad9833: Get frequency value statically
The values from platform data were replaced by statically values.
This was just a intermediate step of taking this driver out of staging and
load data from device tree.

Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-02-02 16:01:36 +00:00
Alexandru Ardelean
0e4c2da4f0 staging: iio: cdc: ad7152: remove driver completely
The AD7153 part has been obsoleted for some time. The AD7152 part will be
obsolete in the coming future.
Moving it out of staging doesn't make sense anymore. Which makes the driver
enter a limbo state.

This patch removes the driver completely, so that no effort is placed on
it, allowing people to focus on other parts that will still be around.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-02-02 10:01:37 +00:00
Jeremy Fertic
78accaea11 staging: iio: adt7316: fix the dac write calculation
The lsb calculation is not masking the correct bits from the user input.
Subtract 1 from (1 << offset) to correctly set up the mask to be applied
to user input.

The lsb register stores its value starting at the bit 7 position.
adt7316_store_DAC() currently assumes the value is at the other end of the
register. Shift the lsb value before storing it in a new variable lsb_reg,
and write this variable to the lsb register.

Fixes: 35f6b6b86e ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
Signed-off-by: Jeremy Fertic <jeremyfertic@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-01-05 17:57:06 +00:00
Jeremy Fertic
45130fb030 staging: iio: adt7316: fix the dac read calculation
The calculation of the current dac value is using the wrong bits of the
dac lsb register. Create two macros to shift the lsb register value into
lsb position, depending on whether the dac is 10 or 12 bit. Initialize
data to 0 so, with an 8 bit dac, the msb register value can be bitwise
ORed with data.

Fixes: 35f6b6b86e ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
Signed-off-by: Jeremy Fertic <jeremyfertic@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-01-05 17:55:23 +00:00
Jeremy Fertic
76b7fe8d6c staging: iio: adt7316: fix handling of dac high resolution option
The adt7316/7 and adt7516/7 have the option to output voltage proportional
to temperature on dac a and/or dac b. The default dac resolution in this
mode is 8 bits with the dac high resolution option enabling 10 bits. None
of these settings affect dacs c and d. Remove the "1 (12 bits)" output from
the show function since that is not an option for this mode. Return
"1 (10 bits)" if the device is one of the above mentioned chips and the dac
high resolution mode is enabled.

In the store function, the driver currently allows the user to write to the
ADT7316_DA_HIGH_RESOLUTION bit regardless of the device in use. Add a check
to return an error in the case of an adt7318 or adt7519. Remove the else
statement that clears the ADT7316_DA_HIGH_RESOLUTION bit. Instead, clear it
before conditionally enabling it, depending on user input. This matches the
typical pattern in the driver when an attribute is a boolean.

Fixes: 35f6b6b86e ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
Signed-off-by: Jeremy Fertic <jeremyfertic@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-01-05 17:52:17 +00:00
Jeremy Fertic
e9de475723 staging: iio: adt7316: fix dac_bits assignment
The value of dac_bits is used in adt7316_show_DAC() and adt7316_store_DAC(),
and it should be either 8, 10, or 12 bits depending on the device in use. The
driver currently only assigns a value to dac_bits in
adt7316_store_da_high_resolution(). The purpose of the dac high resolution
option is not to change dac resolution for normal operation. Instead, it
is specific to an optional feature where one or two of the four dacs can
be set to output voltage proportional to temperature. If the user chooses
to set dac a and/or dac b to output voltage proportional to temperature,
the da_high_resolution attribute can optionally be enabled to use 10 bit
resolution rather than the default 8 bits. This is only available on the
10 and 12 bit dac devices. If the user attempts to read or write dacs a
or b under these settings, the driver's current behaviour is to return an
error. Dacs c and d continue to operate normally under these conditions.
With the above in mind, remove the dac_bits assignments from this function
since the value of dac_bits as used in the driver is not dependent on this
dac high resolution option.

Since the dac_bits assignments discussed above are currently the only ones
in this driver, the default value of dac_bits is 0. This results in incorrect
calculations when the dacs are read or written in adt7316_show_DAC() and
adt7316_store_DAC(). To correct this, assign a value to dac_bits in
adt7316_probe() to ensure correct operation as soon as the device is
registered and available to userspace.

Fixes: 35f6b6b86e ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
Signed-off-by: Jeremy Fertic <jeremyfertic@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-01-05 17:48:39 +00:00
Stefan Popa
2985a5d884 staging: iio: adc: ad7606: Move out of staging
Move ad7606 ADC driver out of staging and into the mainline.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-01-05 16:10:59 +00:00
Stefan Popa
54160ae3b2 staging: iio: adc: ad7606: Misc style fixes (no functional change)
* Placed includes in alphabetical order
* Added brackets around num and mask through out for AD760X_CHANNEL
* Used single line comments where needed
* Removed extra lines and spaces

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-01-05 16:10:52 +00:00
Stefan Popa
cc49bd1652 staging: iio: adc: ad7606: Add support for threaded irq
This patch replaces the use of a polling ring buffer with a threaded
interrupt.

Enabling the buffer sets the CONVST signal to high. When the rising edge
of the CONVST is applied, BUSY signal goes logic high and transitions low
at the end of the entire conversion process. The falling edge of the BUSY
signal triggers the interrupt.

ad7606_trigger_handler() is used as bottom half of the poll function.
It reads data from the device and stores it in the internal buffer.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-01-05 16:10:52 +00:00
Stefan Popa
ca5b4637d7 staging: iio: adc: ad7606: Use SPDX identifier
This patch replaces the license text at the top of ad7606 driver files
and instead adds SPDX GPL-2.0 license identifier.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-01-05 16:10:51 +00:00
Stefan Popa
2bbf53e3e5 staging: iio: adc: ad7606: Simplify the Kconfing menu
There is no point in having three menu entries that can be selected
individually. Instead, the SPI and parallel interfaces should select
AD7606.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-01-05 16:10:51 +00:00
Stefan Popa
43f9b204ed staging: iio: adc: ad7606: Add OF device ID table
The driver does not have a struct of_device_id table, but supported
devices are registered via Device Trees. This patch adds and OF device
ID table.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-22 16:58:14 +00:00
Stefan Popa
6620585a0c staging: iio: adc: ad7606: Use vendor prefix for DT properties
The 'adi' vendor prefix needs to be added to conversion-start, range,
first-data and oversampling-ratio properties.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-22 16:58:13 +00:00
Stefan Popa
41f71e5e7d staging: iio: adc: ad7606: Use find_closest() macro
When looking for the available scale or oversampling ratio, it is better
to use the find_closest() macro. This simplifies the code and also does
not require an exact value to be entered from the user space.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-22 16:58:13 +00:00
Stefan Popa
c0683bfd37 staging: iio: adc: ad7606: Use devm functions in probe
Switch to devm version of request_irq, iio_triggered_buffer_setup,
iio_device_register. To avoid potential ordering issues in probe,
devm_add_action_or_reset() is used for the regulator_disable(). This
simplifies the code and decreases the chance of bugs.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-22 16:58:13 +00:00
Stefan Popa
557e585c3f staging: iio: adc: ad7606: Use wait-for-completion handler
This patch replaces the use of wait_event_interruptible() with
wait_for_completion_timeout() when reading the result of a single
conversion. In this way, if the interrupt never occurs, the program will
not remain blocked.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-22 16:58:12 +00:00
Hardik Singh Rathore
f1b753a0f8 staging: iio: ad7816: drop unnecessary initialization of variables
Initialization is unnecessary when the variable is written before it is
read. There were some occasions in which the driver would initialize `ret'
during declaration without need.

Signed-off-by: Hardik Singh Rathore <hardiksingh.k@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-16 14:05:57 +00:00
Slawomir Stepien
4b6374577f staging: iio: adc: ad7280a: split ad7280_attr_init() to more functions
The ad7280_attr_init function has been split into more specific
functions to increase the code readability.

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-16 14:05:57 +00:00
Slawomir Stepien
243c5c9d7b staging: iio: adc: ad7280a: split ad7280_channel_init() to more functions
The ad7280_channel_init function has been split into more specific
functions to increase the code readability.

The setting of channel's scan_type.shift to 0, has been removed, since
it is the default value.

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-16 14:05:57 +00:00
Marcelo Schmitt
0e0a22aebd staging: iio: ad5933: use clock framework for clock reference
Add the option to specify the external clock (MCLK) using the clock
framework.
Also remove the old platform data structure.

Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Gabriel Capella <gabriel@capella.pro>
Co-developed-by: Gabriel Capella <gabriel@capella.pro>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-16 14:05:56 +00:00
Marcelo Schmitt
c9d07120ab staging: iio: ad5933: change regulator binging for vref
Set a single voltage regulator for all voltage references.
Remove voltage reference value from default platafrom data struct.

Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Gabriel Capella <gabriel@capella.pro>
Co-developed-by: Gabriel Capella <gabriel@capella.pro>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-16 14:05:56 +00:00
Shreeya Patel
7f6b6d553d Staging: iio: adt7316: Add all irq related code in adt7316_irq_setup()
ADT7316 driver no more uses platform data and hence use device tree
data instead of platform data for assigning irq_type field and
implement this in adt7316_irq_setup function.
Switch case figures out the type of irq and if it's the default case
then assign the default value to the irq_type i.e.
irq_type = IRQF_TRIGGER_LOW
Move devm_request_threaded_irq() and assignment of chip->config1
into the adt7316_setup_irq() to unclutter the code in probe function.

Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-16 14:05:56 +00:00
Hardik Singh Rathore
1533e45748 staging: iio: adt7316: drop unnecessary initialization of variables
Initialization is unnecessary when the variable is written before it is
read. There were some occasions in which the driver would initialize `ret'
during declaration without need.

Purely a cosmetic change with no functional impact.

Signed-off-by: Hardik Singh Rathore <hardiksingh.k@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-16 14:05:56 +00:00
Jeremy Fertic
618ab57f95 staging: iio: adt7316: correct spelling of ADT7316_DA_EN_VIA_DAC_LDCA
Change LDCA to LDAC.

Signed-off-by: Jeremy Fertic <jeremyfertic@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-16 14:05:56 +00:00
Jeremy Fertic
32f228cb2a staging: iio: adt7316: change interpretation of write to dac update mode
Based on the output of adt7316_show_all_DAC_update_modes() and
adt7316_show_DAC_update_mode(), adt7316_store_DAC_update_mode() should
expect the user to enter an integer input from 0 to 3. The user input is
currently expected to account for the actual bit positions in the register.
For example, choosing option 3 would require a write of 0x30 (actually 48
since it expects base 10). To address this inconsistency, create a shift
macro to be used in the valid input check as well as the calculation for
the register write.

Signed-off-by: Jeremy Fertic <jeremyfertic@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-16 14:05:56 +00:00
Jeremy Fertic
9f287a1c3f staging: iio: adt7316: remove dac vref buffer bypass from adt751x
The option to allow the external vref to bypass the reference buffer is
only available for adt7316/7/8. Remove the attributes for adt751x as
well as the chip->id checks from the show and store functions.

Signed-off-by: Jeremy Fertic <jeremyfertic@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-16 14:05:55 +00:00
Jeremy Fertic
10bfe7cc17 staging: iio: adt7316: allow adt751x to use internal vref for all dacs
With adt7516/7/9, internal vref is available for dacs a and b, dacs c and
d, or all dacs. The driver doesn't currently support internal vref for all
dacs. Change the else if to an if so both bits are checked rather than
just one or the other.

Signed-off-by: Jeremy Fertic <jeremyfertic@gmail.com>
Fixes: 35f6b6b86e ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-16 14:05:55 +00:00
Jeremy Fertic
5107d16e0a staging: iio: adt7316: use correct variable in DAC_internal_Vref read
The dac internal vref settings are part of the ldac config register rather
than the dac config register. Change the variable being used so the read
returns the correct result.

Whilst a fix, it is for a driver in heavy churn so do not backport
to stable without taking considerable care and testing.

Signed-off-by: Jeremy Fertic <jeremyfertic@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-16 14:05:55 +00:00
Jeremy Fertic
85a1c11913 staging: iio: adt7316: invert the logic of the check for an ldac pin
ADT7316_DA_EN_VIA_DAC_LDCA is set when the dac and ldac registers are being
used to update the dacs instead of the ldac pin. ADT7516_SEL_AIN3 is an adc
input that shares the ldac pin. Only set these bits if an ldac pin is not
being used.

This could be backported to stable, but note there are various
other bugs that probably make that a waste of time.

Signed-off-by: Jeremy Fertic <jeremyfertic@gmail.com>
Fixes: 35f6b6b86e ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-16 14:05:55 +00:00
Jeremy Fertic
53a6f022b4 staging: iio: adt7316: fix register and bit definitions
Change two register addresses and one bit definition to match the
datasheet.

Note that there are many issues in this driver so I would
not suggest backporting these fixes to stable trees.

Signed-off-by: Jeremy Fertic <jeremyfertic@gmail.com>
Fixes: 35f6b6b86e ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-16 14:05:55 +00:00
Jeremy Fertic
5c608d4dd4 Revert "Staging: iio: adt7316: Add an extra check for 'ret' equals to 0"
This reverts commit 00426e9978.

i2c_smbus_read_byte() returns 0 when a byte with the value 0 is read from
the device. This is a valid read so revert the check for 0.

Signed-off-by: Jeremy Fertic <jeremyfertic@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-08 11:15:54 +00:00
Slawomir Stepien
794e20ee03 staging: iio: adc: ad7280a: fix overwrite of the returned value
The ret returned from ad7280_chain_setup() is needed to initialize the
slave_num. Don't overwrite it with call to devm_add_action_or_reset().

Fixes: cc9c58ef6e ("staging: iio: adc: ad7280a: use devm_* APIs")
Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-02 15:36:28 +00:00
Nicholas Mc Guire
53e8785c24 staging: iio: adc: ad7280a: check for devm_kasprint() failure
devm_kasprintf() may return NULL on failure of internal allocation thus
the assignments to  attr.name  are not safe if not checked. On error
ad7280_attr_init() returns a negative return so -ENOMEM should be
OK here (passed on as return value of the probe function). To make the
error case more readable a temporary  iio_attr  is introduced and the code
refactored.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: 2051f25d2a ("iio: adc: New driver for AD7280A Lithium Ion Battery Monitoring System2")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-01 16:35:14 +00:00
Matheus Tavares
9564c7a492 staging:iio:ad2s90: Move out of staging
Move ad2s90 resolver driver out of staging to the main tree.

Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Victor Colombo <victorcolombo@gmail.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-01 15:40:39 +00:00
Victor Colombo
3a1203bfa4 staging:iio:ad2s90: Add comment to device state mutex
Fix the checkpatch.pl issue:
"CHECK: struct mutex definition without comment".

Signed-off-by: Victor Colombo <victorcolombo@gmail.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-01 15:40:22 +00:00
Matheus Tavares
07e00822cc staging:iio:ad2s90: Replace license text w/ SPDX identifier
This patch removes the license boilerplate text at the top of ad2s90.c
and, instead, adds the SPDX GPL-2.0 license identifier, which solves the
checkpatch.pl warning:
"WARNING: Missing or malformed SPDX-License-Identifier tag in line 1".

Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-01 15:38:01 +00:00
Alexandru Ardelean
11d509adfb staging:iio:ad2s90: Add max frequency check at probe
This patch adds a max frequency check at the beginning of ad2s90_probe
function so that when it is set to a value above 0.83Mhz, dev_err is
called with an appropriate message and -EINVAL is returned.

The defined limit is 0.83Mhz instead of 2Mhz, which is the chip's max
frequency as specified in the datasheet, because, as also specified in
the datasheet, a 600ns delay is expected between the application of a
logic LO to CS and the application of SCLK. Since the delay is not
implemented in the spi code, to satisfy it, SCLK's period should be at
most 2 * 600ns, so the max frequency should be 1 / (2 * 6e-7), which
gives roughly 830000Hz.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-01 15:35:33 +00:00
Matheus Tavares
a996590bad staging:iio:ad2s90: Remove spi setup that should be done via dt
The ad2s90 driver currently sets some spi settings (max_speed_hz and
mode) at ad2s90_probe. Since the maximum frequency is a required element
in DT binding for spi slave devices and because the spi mode for the
device can be either (0,0) or (1,1), these settings should be handled
via device tree, not in the driver's code. This patch removes them from
the probe function.

Note: The way in which the mentioned spi settings need to be specified
on the ad2s90's node of a device tree will be documented in the future
patch "dt-bindings:iio:resolver: Add docs for ad2s90".

Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-01 15:35:25 +00:00
Matheus Tavares
f116914dca staging:iio:ad2s90: Add device tree support
This patch adds device tree support to ad2s90 with standard
device tree id table.

Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-01 15:35:18 +00:00
Shreeya Patel
c3d8360deb Staging: iio: adt7316: Change the name from irq_flags to irq_type
Most of the drivers in IIO uses irq_type as the name for
storing the interrupt type and hence change the name from
irq_flags to irq_type for maintaining the consistency.

Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-25 11:52:19 +00:00
Shreeya Patel
3310280830 Staging: iio: adt7316: Switch irq_flags to a local variable
There is no need to store irq_flags into the structure as it
is always set to the same thing. Hence switch irq_flags to a
local variable.

Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-25 11:49:33 +00:00
Shreeya Patel
c63460c429 Staging: iio: adt7316: Use device tree data to set ldac_pin
Make the driver use device tree instead of the platform data.
Hence, use devm_gpiod_get_optional function to get the data from
device tree for ldac-pin and accordingly make the needed changes
in the driver.

Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-25 11:48:57 +00:00
Shreeya Patel
f8f612530e Staging: iio: adt7316: Add of_device_id table
When the kernel starts up, it kicks off compiled-in drivers
that match “compatible” entries it finds in the device tree.
At a later stage (when /lib/modules is available), all kernel modules
that match “compatible” entries in the device tree are loaded.

But if there is no dt table then there should be a fall back path
with which desired kernel modules can be loaded. Hence, add
of_device_id table in the i2c driver to be able to use when there
is no dt table.

Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-25 11:43:47 +00:00
Marcelo Schmitt
bac257b0d2 staging: iio: ad5933: add device tree support
Add a of_device_id struct variable and subsequent call to
MODULE_DEVICE_TABLE macro to complete device tree support.

Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-25 09:58:08 +00:00
Greg Kroah-Hartman
7c0bc65c84 First set of new device support, features and cleanups for IIO in the 4.21 cycle
Along with the headline feature of 5 new drivers, we have the
 substantial addition of auxilliary sensor support on the lsm6sdx
 parts for ST.  There has also been a good set of staging cleanup
 in this period with more underway.
 
 An ever increasing number of devices supported with just a new
 ID which is a good sign that at least some manufacturers are
 continuing to stabilise their interfaces.
 
 New device support,
 * ad7124
   - New driver supporting Analog Devices' ad7124-4 and ad7124-8 parts
     with the inevitable DT binding.
 * ad7949
   - New driver supporting Analog Devices' ad7949, AD7682 and AD7689 ADCs.
 * rm3100
   - New driver supporting PNIs RM3100 magnometer with bindings and
     vendor prefix.
 * ti-dac7311
   - New driver supporting DAC7311, DAC6311 and DAC5311 TI DACs, with
     DT bindings.
 * vcnl5035
   - New driver supporting the light sensor part of the VCNL4035, with
     DT bindings
 
 Features,
 * bindings
   - Add a generic ADC channel binding as we keep reinventing this
     wheel.
 * adc128s052
   - Add IDs for additional pin compatible parts.
   - Add APCI ID seen on E3940 UP squared boards.
 * ad_sigma_delta
   - Allow for custom data register overiding default.
 * kxcjk1013
   - Add KIOX0009 ACPI ID as seen on the Acer One 10.
 * lsm6dsx
   - Rework leading to...
   - External sensor support using the built in I2C master.
   - Initial support for a slave lis2mdl magnetometer.
 * meson-saradc
   - Add temperature sensor support and bindings.
 * st_magn
   - New ID for lsm9dsl_magn with bindings
   - New ID for lis3de accelerometer
 * tpl0102
   - Add supprot for IIO_AVAIL_RANGE to report the range available
     from this device to userspace and in kernel users.
 
 Cleanups and minor fixes
 * tools
   - Allow outside specification of CFLAGS
 * ad2s90
   - Handle and spi_read error.
   - Handle spi_setup failure
   - Drop a pointless assignment.
   - Prevent a potentail race by moving device registration to after
     all other setup.
   - Add missing scale attribute.
   - Add a sanity check on channel type before trying to read it.
 * ad2s1210
   - Move to modern gpio descriptors.
   - Drop a gpioin flag which made no sense as far as we can tell.
   - Add dt table (bindings doc to follow when this is ready for
     moving out of staging).
 * ad5933
   - Drop camel-case naming of ext_clk_hz.
   - White space fixes.
 * ad7150
   - Local variable to shorten overly long line.
   - Alignment and line break fixes.
 * ad7280a
   - Handle an error path that was previously ignored.
   - Use crc8.h to build the crc table replacing custom code.
   - Avoid unecessary cast.
   - Power down the device if an error happens in probe
   - Use devm routines to simplify probe and remove.
 * ad7606
   - Alignment fixes.
 * ad7780
   - This worked as long as by coincidence an uninitialized value
     was 0.  Lets not rely on that.
   - Ensure gain update is only used with the ad778x chips that
     actually support it.
   - Tidy up pattern mask generation.
   - Read regulator when scale is requested (which should be infrequent)
     as it might have changed from initialization.
 * ad7816
   - Move to modern gpio descriptors
   - Don't use a busy_pin for ad7818 as there isn't one.
   - Ensure RD/WR and CONVST pins are outputs (previously they
     were brought up as inputs which doesn't seem to make any sense)
   - DT id table.
 * adc128s052
   - SPDX
 * adt7316
   - Alignment fix.
   - Fix data reading.  When using I2C the driver never actually
     used the value read.  This has been broken a very long time
     hence no rush to fix it now + the driver is undergoing a lot
     of cleanup.
   - Sanity check that the i2c read didn't fail to actually read
     anything.
 * dpot-dac
   - Mark a switch full through with slightly different text so that
     gcc doesn't warn on it.
 * gyro-adc
   - Fix a wrong file in the MAINTAINERS entry and add binding doc to the
     listed files.
 * ina2xx
   - Add some early returns to clarify error paths in switch.
 * lsm6dsx
   - MAINTAINERS entry.
 * max11100
   - SPDX
 * max9611
   - SPDX
 * mcp4131
   - use of_device_get_match_data in preference to spi_get_device_id
     approach.
 * rcar-adc
   - SPDX
 * sc27xx
   - Add ADC conversion timeout support to avoid possible fault.
 * ssp_sensors
   - Don't free managed resources manually.
 * st-magn
   - Add a comment to avoid future confusion over when to use -magn
     postfix (on multi chip in package parts)
   - Add BDU register for LIS3MDL where it seems to have been missed.
 * st-sensors
   - Minor spelling, grammar etc fixes.
 * tpl0102
   - Use a pointer rather than an index of an array to improve conciseness.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlv1wDARHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Fohf9Q//fzNk9RoY98awaEmHRW7PLnHe1WKyQTV5
 M13EaFwm/NeWfT1kaNd/heZDnwucB34ONrcueNcM8MfwzPwWaL9UvSqEnSWIuTae
 hKdn/BMTfy168xhu95YPjHw4X42HwcXYlHL9XFsA0WERgaWsQu2EwIy1/3XRgIrt
 QPQVyJNUkLZmBuGcd2UhxzdTiLuh/hs7FFBg037hxaR77slWYKqAzwVa6eyz/jvo
 tRT9RE50O1FT3eDkBSw91nkamFcmFyyA2j4HQ33Aitjs5O1ML95xEJ0tMAznZfKn
 zAGCCUJjFYBvWPOpQ8xBA3tplFRGIyVhPJ5ZU+B2vZcxVXQ3IFZNqKRXfrUkAXpf
 PK2+05+HjHk1g7Ms1Tj4lF5AtP/nEQ8dvmGk6/nDU7Gt4Ytrpb0DhAuMGmN4S5ih
 zwwh+c6fLGCMz7KE8AoegOn3WF/FW1ZppTRjOWgqt7OP6lgoChPuTV5HGzxiZgr+
 MzY/fytbXTnmfTL1ZvZYPdOSjkHcS9+8rwu1Jirmb1Y5Qt3qpNAUsdsnt965mQaE
 bHmuqw8QJN31goTEsqvjnsFhH57dJ1HbmG0MSrF8XB0bQB5Xzbkd+RV4fls1J+SG
 XwpIzQLhPxF5da6G+I/SIgLX6nASacJp9hHEN/ZuM3IKr2UW8FCpCH6JmyX0i6OU
 dPjHsXrGTuI=
 =78Y3
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 4.21 cycle

Along with the headline feature of 5 new drivers, we have the
substantial addition of auxilliary sensor support on the lsm6sdx
parts for ST.  There has also been a good set of staging cleanup
in this period with more underway.

An ever increasing number of devices supported with just a new
ID which is a good sign that at least some manufacturers are
continuing to stabilise their interfaces.

New device support,
* ad7124
  - New driver supporting Analog Devices' ad7124-4 and ad7124-8 parts
    with the inevitable DT binding.
* ad7949
  - New driver supporting Analog Devices' ad7949, AD7682 and AD7689 ADCs.
* rm3100
  - New driver supporting PNIs RM3100 magnometer with bindings and
    vendor prefix.
* ti-dac7311
  - New driver supporting DAC7311, DAC6311 and DAC5311 TI DACs, with
    DT bindings.
* vcnl5035
  - New driver supporting the light sensor part of the VCNL4035, with
    DT bindings

Features,
* bindings
  - Add a generic ADC channel binding as we keep reinventing this
    wheel.
* adc128s052
  - Add IDs for additional pin compatible parts.
  - Add APCI ID seen on E3940 UP squared boards.
* ad_sigma_delta
  - Allow for custom data register overiding default.
* kxcjk1013
  - Add KIOX0009 ACPI ID as seen on the Acer One 10.
* lsm6dsx
  - Rework leading to...
  - External sensor support using the built in I2C master.
  - Initial support for a slave lis2mdl magnetometer.
* meson-saradc
  - Add temperature sensor support and bindings.
* st_magn
  - New ID for lsm9dsl_magn with bindings
  - New ID for lis3de accelerometer
* tpl0102
  - Add supprot for IIO_AVAIL_RANGE to report the range available
    from this device to userspace and in kernel users.

Cleanups and minor fixes
* tools
  - Allow outside specification of CFLAGS
* ad2s90
  - Handle and spi_read error.
  - Handle spi_setup failure
  - Drop a pointless assignment.
  - Prevent a potentail race by moving device registration to after
    all other setup.
  - Add missing scale attribute.
  - Add a sanity check on channel type before trying to read it.
* ad2s1210
  - Move to modern gpio descriptors.
  - Drop a gpioin flag which made no sense as far as we can tell.
  - Add dt table (bindings doc to follow when this is ready for
    moving out of staging).
* ad5933
  - Drop camel-case naming of ext_clk_hz.
  - White space fixes.
* ad7150
  - Local variable to shorten overly long line.
  - Alignment and line break fixes.
* ad7280a
  - Handle an error path that was previously ignored.
  - Use crc8.h to build the crc table replacing custom code.
  - Avoid unecessary cast.
  - Power down the device if an error happens in probe
  - Use devm routines to simplify probe and remove.
* ad7606
  - Alignment fixes.
* ad7780
  - This worked as long as by coincidence an uninitialized value
    was 0.  Lets not rely on that.
  - Ensure gain update is only used with the ad778x chips that
    actually support it.
  - Tidy up pattern mask generation.
  - Read regulator when scale is requested (which should be infrequent)
    as it might have changed from initialization.
* ad7816
  - Move to modern gpio descriptors
  - Don't use a busy_pin for ad7818 as there isn't one.
  - Ensure RD/WR and CONVST pins are outputs (previously they
    were brought up as inputs which doesn't seem to make any sense)
  - DT id table.
* adc128s052
  - SPDX
* adt7316
  - Alignment fix.
  - Fix data reading.  When using I2C the driver never actually
    used the value read.  This has been broken a very long time
    hence no rush to fix it now + the driver is undergoing a lot
    of cleanup.
  - Sanity check that the i2c read didn't fail to actually read
    anything.
* dpot-dac
  - Mark a switch full through with slightly different text so that
    gcc doesn't warn on it.
* gyro-adc
  - Fix a wrong file in the MAINTAINERS entry and add binding doc to the
    listed files.
* ina2xx
  - Add some early returns to clarify error paths in switch.
* lsm6dsx
  - MAINTAINERS entry.
* max11100
  - SPDX
* max9611
  - SPDX
* mcp4131
  - use of_device_get_match_data in preference to spi_get_device_id
    approach.
* rcar-adc
  - SPDX
* sc27xx
  - Add ADC conversion timeout support to avoid possible fault.
* ssp_sensors
  - Don't free managed resources manually.
* st-magn
  - Add a comment to avoid future confusion over when to use -magn
    postfix (on multi chip in package parts)
  - Add BDU register for LIS3MDL where it seems to have been missed.
* st-sensors
  - Minor spelling, grammar etc fixes.
* tpl0102
  - Use a pointer rather than an index of an array to improve conciseness.

* tag 'iio-for-4.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (80 commits)
  Staging: iio: adt7316: Add an extra check for 'ret' equals to 0
  Staging: iio: adt7316: Fix i2c data reading, set the data field
  dt-bindings: iio: adc: Add docs for ad7124
  iio: adc: Add ad7124 support
  dt-bindings: iio: adc: Add common ADCs properties to a separate file
  iio: ad_sigma_delta: Allow to provide custom data register address
  staging: iio: ad7816: Add device tree table.
  iio: imu: st_lsm6dsx: add entry in MAINTAINERS file
  iio: potentiometer: mcp4131: use of_device_get_match_data()
  staging: iio: adc: ad7280a: use devm_* APIs
  staging: iio: adc: ad7280a: power down the device on error in probe
  dt-bindings: iio: imu: st_lsm6dsx: add support to i2c pullup resistors
  iio: imu: st_lsm6dsx: add hw FIFO support to i2c controller
  iio: imu: st_lsm6dsx: add st_lsm6dsx_push_tagged_data routine
  iio: imu: st_lsm6dsx: add i2c embedded controller support
  iio: imu: st_lsm6dsx: introduce st_lsm6dsx_sensor_set_enable routine
  iio: imu: st_lsm6dsx: introduce ST_LSM6DSX_ID_EXT sensor ids
  iio: imu: st_lsm6dsx: remove static from st_lsm6dsx_set_watermark
  iio: imu: st_lsm6dsx: reload trimming parameter at bootstrap
  iio: imu: st_lsm6dsx: introduce locked read/write utility routines
  ...
2018-11-22 09:39:45 +01:00
Shreeya Patel
00426e9978 Staging: iio: adt7316: Add an extra check for 'ret' equals to 0
ret = 0 indicates a case of no error but no data read from
the bus which is an invalid case. This case doesn't ever happen
in reality. It should perhaps be handled for correctness though.

Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-17 16:59:56 +00:00
Shreeya Patel
688cd642ba Staging: iio: adt7316: Fix i2c data reading, set the data field
adt7316_i2c_read function nowhere sets the data field.
It is necessary to have an appropriate value for it.
Hence, assign the value stored in 'ret' variable to data field.

This is an ancient bug, and as no one seems to have noticed,
probably no sense in applying it to stable.

Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-17 16:57:09 +00:00