To properly handle read transfers in polling mode, no waiting for the ACK
state is needed as it will never come. Just wait a bit to ensure start
state is on the bus and continue processing next bytes.
Fixes: 117053f77a ("i2c: s3c2410: Add polling mode support")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
To support FM+, we mainly need to turn the SMD constant into a parameter
and set it accordingly. That also means we can finally fix SMD to our
needs instead of bailing out. A sanity check for SMD then becomes a
sanity check for 'x == 0'. After all that, activating the enable bit for
FM+ is all we need to do. Tested with a Renesas Falcon board using R-Car
V3U.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
So far, we treated Gen4 as Gen3. But we are soon adding FM+ as a Gen4
specific feature, so prepare the code for the new devtype.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The I2C core now provides a per-adapter debugfs directory. Use it
instead of creating a custom one.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The I2C core now provides a per-adapter debugfs directory. Use it
instead of creating a custom one.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Two drivers already implement custom debugfs handling for their
i2c_adapter and more will come. So, let the core create a debugfs
directory per adapter and pass that to drivers for their debugfs files.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
After removal of the legacy eeprom driver the only remaining I2C
client device driver supporting I2C_CLASS_SPD is jc42. Because this
driver also supports I2C_CLASS_HWMON, adapters don't have to
declare support for I2C_CLASS_SPD if they support I2C_CLASS_HWMON.
It's one step towards getting rid of I2C_CLASS_SPD mid-term.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
After removal of the legacy eeprom driver the only remaining I2C
client device driver supporting I2C_CLASS_SPD is jc42. Because this
driver also supports I2C_CLASS_HWMON, adapters don't have to
declare support for I2C_CLASS_SPD if they support I2C_CLASS_HWMON.
It's one step towards getting rid of I2C_CLASS_SPD mid-term.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
After removal of the legacy eeprom driver the only remaining I2C
client device driver supporting I2C_CLASS_SPD is jc42. Because this
driver also supports I2C_CLASS_HWMON, adapters don't have to
declare support for I2C_CLASS_SPD if they support I2C_CLASS_HWMON.
It's one step towards getting rid of I2C_CLASS_SPD mid-term.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
After removal of the legacy eeprom driver the only remaining I2C
client device driver supporting I2C_CLASS_SPD is jc42. Because this
driver also supports I2C_CLASS_HWMON, adapters don't have to
declare support for I2C_CLASS_SPD if they support I2C_CLASS_HWMON.
It's one step towards getting rid of I2C_CLASS_SPD mid-term.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Jim Cromie <jim.cromie@gmail.com> # for SCX
Signed-off-by: Wolfram Sang <wsa@kernel.org>
I2C_CLASS_SPD was used to expose the EEPROM content to user space,
via the legacy eeprom driver. Now that this driver has been removed,
we can remove I2C_CLASS_SPD support. at24 driver with explicit
instantiation should be used instead.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
After removal of the legacy EEPROM driver and I2C_CLASS_DDC support in
olpc_dcon there's no i2c client driver left supporting I2C_CLASS_DDC.
Class-based device auto-detection is a legacy mechanism and shouldn't
be used in new code. So we can remove this class completely now.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
After removal of the legacy EEPROM driver and I2C_CLASS_DDC support in
olpc_dcon there's no i2c client driver left supporting I2C_CLASS_DDC.
Class-based device auto-detection is a legacy mechanism and shouldn't
be used in new code. So we can remove this class completely now.
Acked-by: Helge Deller <deller@gmx.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
After removal of the legacy EEPROM driver and I2C_CLASS_DDC support in
olpc_dcon there's no i2c client driver left supporting I2C_CLASS_DDC.
Class-based device auto-detection is a legacy mechanism and shouldn't
be used in new code. So we can remove this class completely now.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
where the CPU would remain at the lowest frequency, degrading
performance substantially.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=c7Ib
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2024-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix a cpufreq related performance regression on certain systems, where
the CPU would remain at the lowest frequency, degrading performance
substantially"
* tag 'sched-urgent-2024-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix frequency selection for non-invariant case
Here is the big set of USB and Thunderbolt changes for 6.8-rc1.
Included in here are the following:
- Thunderbolt subsystem and driver updates for USB 4 hardware and
issues reported by real devices
- xhci driver updates
- dwc3 driver updates
- uvc_video gadget driver updates
- typec driver updates
- gadget string functions cleaned up
- other small changes
All of these have been in the linux-next tree for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaedng8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yndHACfX3SA2ipK5umpMsWOoLMCBV6VyrwAn3t+FPd/
z4mNiCuNUhbEnU7RinK0
=k/E9
-----END PGP SIGNATURE-----
Merge tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.8-rc1.
Included in here are the following:
- Thunderbolt subsystem and driver updates for USB 4 hardware and
issues reported by real devices
- xhci driver updates
- dwc3 driver updates
- uvc_video gadget driver updates
- typec driver updates
- gadget string functions cleaned up
- other small changes
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
usb: typec: tipd: fix use of device-specific init function
usb: typec: tipd: Separate reset for TPS6598x
usb: mon: Fix atomicity violation in mon_bin_vma_fault
usb: gadget: uvc: Remove nested locking
usb: gadget: uvc: Fix use are free during STREAMOFF
usb: typec: class: fix typec_altmode_put_partner to put plugs
dt-bindings: usb: dwc3: Limit num-hc-interrupters definition
dt-bindings: usb: xhci: Add num-hc-interrupters definition
xhci: add support to allocate several interrupters
USB: core: Use device_driver directly in struct usb_driver and usb_device_driver
arm64: dts: mediatek: mt8195: Add 'rx-fifo-depth' for cherry
usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transfer
dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue
arm64: dts: qcom: msm8996: Remove PNoC clock from MSS
arm64: dts: qcom: msm8996: Remove AGGRE2 clock from SLPI
arm64: dts: qcom: msm8998: Remove AGGRE2 clock from SLPI
arm64: dts: qcom: msm8939: Drop RPM bus clocks
arm64: dts: qcom: sdm630: Drop RPM bus clocks
arm64: dts: qcom: qcs404: Drop RPM bus clocks
arm64: dts: qcom: msm8996: Drop RPM bus clocks
...
Here is the big set of tty and serial driver changes for 6.8-rc1.
As usual, Jiri has a bunch of refactoring and cleanups for the tty core
and drivers in here, along with the usual set of rs485 updates (someday
this might work properly...) Along with those, in here are changes for:
- sc16is7xx serial driver updates
- platform driver removal api updates
- amba-pl011 driver updates
- tty driver binding updates
- other small tty/serial driver updates and changes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeUaw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykyOgCgp1uhP/b9iW6qM7qL6OYEG6idI0kAnj0VASNm
vSI69HmdKKwo69YLOSBp
=14n1
-----END PGP SIGNATURE-----
Merge tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.8-rc1.
As usual, Jiri has a bunch of refactoring and cleanups for the tty
core and drivers in here, along with the usual set of rs485 updates
(someday this might work properly...)
Along with those, in here are changes for:
- sc16is7xx serial driver updates
- platform driver removal api updates
- amba-pl011 driver updates
- tty driver binding updates
- other small tty/serial driver updates and changes
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits)
serial: sc16is7xx: refactor EFR lock
serial: sc16is7xx: reorder code to remove prototype declarations
serial: sc16is7xx: refactor FIFO access functions to increase commonality
serial: sc16is7xx: drop unneeded MODULE_ALIAS
serial: sc16is7xx: replace hardcoded divisor value with BIT() macro
serial: sc16is7xx: add explicit return for some switch default cases
serial: sc16is7xx: add macro for max number of UART ports
serial: sc16is7xx: add driver name to struct uart_driver
serial: sc16is7xx: use i2c_get_match_data()
serial: sc16is7xx: use spi_get_device_match_data()
serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield
serial: sc16is7xx: improve do/while loop in sc16is7xx_irq()
serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq()
serial: sc16is7xx: set safe default SPI clock frequency
serial: sc16is7xx: add check for unsupported SPI modes during probe
serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error
serial: 8250_exar: Set missing rs485_supported flag
serial: omap: do not override settings for RS485 support
serial: core, imx: do not set RS485 enabled if it is not supported
serial: core: make sure RS485 cannot be enabled when it is not supported
...
ep93xx (Arnd Bergman)
- Fixed some kerneldoc warning on Cadence TTC (Randy Dunlap)
- Fixed kerneldoc warning on Timer TI DM (Tony Lindgren)
- Handle interrupt disabling when shutting down the timer on RISC-V
timer (Joshua Yeong)
- Add compatible string for the StarFive JH8100 clint (Sia Jee Heng)
- Separate mtime and mtimecmp registers in DT bindings (Inochi Amaoto)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmWTASUACgkQqDIjiipP
6E/eAwf+KEQXxEMk03d/sbehABXQ9TXB3KHZE4IgqQ9N+v4qxX5B9MsOHfvDv3La
NQmrgVOcTSMzymhemy6TTXnKgQPqWy7QhqPF/+wTKqMxQAWeyPzYCVzo32CWLfrG
el2uBtqhG7zq/0+9KEbw8ogSaV8+YqvJvHopTMe1hWXeRIr8rsaa5Hn3n3+caU68
YNcffng1F+15YJuceKmHFcT6yt1bFZJGqmxJYkrsiV8Wy8+SSObq71sLY+KlWkXX
WnIKuU3snLHUW6yiL3ukRY92T9LIl73ditCvt+HHcVZUBTCS9ZZP7LAZ+euTxexJ
1aN5jdc82hb+KX6ZylNFHw54PKiXag==
=5NMH
-----END PGP SIGNATURE-----
Merge tag 'timers-v6.8-rc1' of http://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clockevent/clocksource updates from Daniel Lezcano:
- Fixed error handling at probe time and uninitialized return code on
ep93xx (Arnd Bergman)
- Fixed some kerneldoc warning on Cadence TTC (Randy Dunlap)
- Fixed kerneldoc warning on Timer TI DM (Tony Lindgren)
- Handle interrupt disabling when shutting down the timer on RISC-V
timer (Joshua Yeong)
- Add compatible string for the StarFive JH8100 clint (Sia Jee Heng)
- Separate mtime and mtimecmp registers in DT bindings (Inochi Amaoto)
Link: https://lore.kernel.org/lkml/0f07af92-e4b2-48de-88a6-dd9aa9e49743@linaro.org
There are reports of kernels crashing due to stack overflow while
running OpenShift (Kubernetes). The primary contributor to the stack
usage seems to be openvswitch, which is used by OVN-Kubernetes (based on
OVN (Open Virtual Network)), but NFS also contributes in some stack
traces.
There may be some opportunities to reduce stack usage in the openvswitch
code, but doing so potentially require tradeoffs vs performance, and
also requires testing across architectures.
Looking at stack usage across the kernel (using -fstack-usage), shows
that ppc64le stack frames are on average 50-100% larger than the
equivalent function built for x86-64. Which is not surprising given the
minimum stack frame size is 32 bytes on ppc64le vs 16 bytes on x86-64.
So increase the default stack size to 32KB for the modern 64-bit Book3S
platforms, ie. pseries (virtualised) and powernv (bare metal). That
leaves the older systems like G5s, and the AmigaOne (pasemi) with a 16KB
stack which should be sufficient on those machines.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Link: https://msgid.link/20231215124449.317597-1-mpe@ellerman.id.au
Here is the "big" set of staging driver changes for 6.8-rc1. It's not
really that big this release cycle, not much happened except for 186
patches of coding style cleanups. The majority was in the rtl8192e
driver, but there are other smaller changes in a few other staging
drivers, full details in the shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeSDA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynrUwCdH3CCHL2IxeW2/qPMKU/cE8KWYWcAmwZe7Rvi
Jdfezr0N6ObpYaNWWndv
=4kLy
-----END PGP SIGNATURE-----
Merge tag 'staging-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the "big" set of staging driver changes for 6.8-rc1. It's not
really that big this release cycle, not much happened except for 186
patches of coding style cleanups. The majority was in the rtl8192e
driver, but there are other smaller changes in a few other staging
drivers, full details in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (186 commits)
Staging: rtl8192e: Rename variable OpMode
Staging: rtl8192e: Rename variable bIsAggregateFrame
Staging: rtl8192e: Rename function rtllib_EnableNetMonitorMode()
Staging: rtl8192e: Rename variable NumRxOkInPeriod
Staging: rtl8192e: Rename variable NumTxOkInPeriod
Staging: rtl8192e: Rename variable bUsed
staging: vme_user: print more detailed infomation when an error occurs
Staging: rtl8192e: Rename function rtllib_DisableNetMonitorMode()
Staging: rtl8192e: Rename variable bInitState
Staging: rtl8192e: Rename variable skb_waitQ
Staging: rtl8192e: Rename variable BasicRate
Staging: rtl8192e: Rename variable QueryRate
Staging: rtl8192e: Rename function rtllib_TURBO_Info()
Staging: rtl8192e: Rename function rtllib_WMM_Info()
Staging: rtl8192e: Rename function rtllib_MFIE_Grate()
Staging: rtl8192e: Rename function rtllib_MFIE_Brate()
Staging: rtl8192e: Fixup statement broken across 2 lines in rtllib_softmac_new_net()
Staging: rtl8192e: Fixup statement broken across 2 lines in rtllib_softmac_xmit()
Staging: rtl8192e: Fix function definition broken across multiple lines
Staging: rtl8192e: Fix statement broken across 2 lines in rtllib_rx_assoc_resp()
...
minor comment cleanup and trivial camelCase removal
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In analyzing problems, one missing piece of debug data is when the
mount occurred. A related problem is when collecting stats we don't
know the period of time the stats covered, ie when this set of stats
for the tcon started to be collected. To make debugging easier track
the stats begin time. Set it when the mount occurred at mount time,
and reset it to current time whenever stats are reset. For example,
...
1) \\localhost\test
SMBs: 14 since 2024-01-17 22:17:30 UTC
Bytes read: 0 Bytes written: 0
Open files: 0 total (local), 0 open on server
TreeConnects: 1 total 0 failed
TreeDisconnects: 0 total 0 failed
...
2) \\localhost\scratch
SMBs: 24 since 2024-01-17 22:16:04 UTC
Bytes read: 0 Bytes written: 0
Open files: 0 total (local), 0 open on server
TreeConnects: 1 total 0 failed
TreeDisconnects: 0 total 0 failed
...
Note the time "since ... UTC" is now displayed in /proc/fs/cifs/Stats
for each share that is mounted.
Suggested-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZalBVQAKCRDbK58LschI
gyfQAP4+KhkJiJiOXsECo0f3JcuzDgCqEMnylNx0Wujzgs2s9wD+LEjYr8zztqUd
E9rkjGKUoSYYfarEJ0KKfy6Lv61BlgY=
=xI6t
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-01-18
We've added 10 non-merge commits during the last 5 day(s) which contain
a total of 12 files changed, 806 insertions(+), 51 deletions(-).
The main changes are:
1) Fix an issue in bpf_iter_udp under backward progress which prevents
user space process from finishing iteration, from Martin KaFai Lau.
2) Fix BPF verifier to reject variable offset alu on registers with a type
of PTR_TO_FLOW_KEYS to prevent oob access, from Hao Sun.
3) Follow up fixes for kernel- and libbpf-side logic around handling
arg:ctx tagged arguments of BPF global subprogs, from Andrii Nakryiko.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
libbpf: warn on unexpected __arg_ctx type when rewriting BTF
selftests/bpf: add tests confirming type logic in kernel for __arg_ctx
bpf: enforce types for __arg_ctx-tagged arguments in global subprogs
bpf: extract bpf_ctx_convert_map logic and make it more reusable
libbpf: feature-detect arg:ctx tag support in kernel
selftests/bpf: Add test for alu on PTR_TO_FLOW_KEYS
bpf: Reject variable offset alu on PTR_TO_FLOW_KEYS
selftests/bpf: Test udp and tcp iter batching
bpf: Avoid iter->offset making backward progress in bpf_iter_udp
bpf: iter_udp: Retry with a larger batch size without going back to the previous bucket
====================
Link: https://lore.kernel.org/r/20240118153936.11769-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 56df345917 ("i40e: Remove circular header dependencies and fix
headers") redistributed a number of includes from one large header file
to the locations they were needed. In some environments, types.h is not
included and causing compile issues. The driver should not rely on
implicit inclusion from other locations; explicitly include it to these
files.
Snippet of issue. Entire log can be seen through the Closes: link.
In file included from drivers/net/ethernet/intel/i40e/i40e_diag.h:7,
from drivers/net/ethernet/intel/i40e/i40e_diag.c:4:
drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h:33:9: error: unknown type name '__le16'
33 | __le16 flags;
| ^~~~~~
drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h:34:9: error: unknown type name '__le16'
34 | __le16 opcode;
| ^~~~~~
...
drivers/net/ethernet/intel/i40e/i40e_diag.h:22:9: error: unknown type name 'u32'
22 | u32 elements; /* number of elements if array */
| ^~~
drivers/net/ethernet/intel/i40e/i40e_diag.h:23:9: error: unknown type name 'u32'
23 | u32 stride; /* bytes between each element */
Reported-by: Martin Zaharinov <micron10@gmail.com>
Closes: https://lore.kernel.org/netdev/21BBD62A-F874-4E42-B347-93087EEA8126@gmail.com/
Fixes: 56df345917 ("i40e: Remove circular header dependencies and fix headers")
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240117172534.3555162-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
idev->mc_ifc_count can be written over without proper locking.
Originally found by syzbot [1], fix this issue by encapsulating calls
to mld_ifc_stop_work() (and mld_gq_stop_work() for good measure) with
mutex_lock() and mutex_unlock() accordingly as these functions
should only be called with mc_lock per their declarations.
[1]
BUG: KCSAN: data-race in ipv6_mc_down / mld_ifc_work
write to 0xffff88813a80c832 of 1 bytes by task 3771 on cpu 0:
mld_ifc_stop_work net/ipv6/mcast.c:1080 [inline]
ipv6_mc_down+0x10a/0x280 net/ipv6/mcast.c:2725
addrconf_ifdown+0xe32/0xf10 net/ipv6/addrconf.c:3949
addrconf_notify+0x310/0x980
notifier_call_chain kernel/notifier.c:93 [inline]
raw_notifier_call_chain+0x6b/0x1c0 kernel/notifier.c:461
__dev_notify_flags+0x205/0x3d0
dev_change_flags+0xab/0xd0 net/core/dev.c:8685
do_setlink+0x9f6/0x2430 net/core/rtnetlink.c:2916
rtnl_group_changelink net/core/rtnetlink.c:3458 [inline]
__rtnl_newlink net/core/rtnetlink.c:3717 [inline]
rtnl_newlink+0xbb3/0x1670 net/core/rtnetlink.c:3754
rtnetlink_rcv_msg+0x807/0x8c0 net/core/rtnetlink.c:6558
netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2545
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6576
netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
netlink_unicast+0x589/0x650 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x66e/0x770 net/netlink/af_netlink.c:1910
...
write to 0xffff88813a80c832 of 1 bytes by task 22 on cpu 1:
mld_ifc_work+0x54c/0x7b0 net/ipv6/mcast.c:2653
process_one_work kernel/workqueue.c:2627 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2700
worker_thread+0x525/0x730 kernel/workqueue.c:2781
...
Fixes: 2d9a93b490 ("mld: convert from timer to delayed work")
Reported-by: syzbot+a9400cabb1d784e49abf@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/000000000000994e09060ebcdffb@google.com/
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Acked-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240117172102.12001-1-n.zhandarovich@fintech.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here are the set of driver core and kernfs changes for 6.8-rc1. Nothing
major in here this release cycle, just lots of small cleanups and some
tweaks on kernfs that in the very end, got reverted and will come back
in a safer way next release cycle.
Included in here are:
- more driver core 'const' cleanups and fixes
- fw_devlink=rpm is now the default behavior
- kernfs tiny changes to remove some string functions
- cpu handling in the driver core is updated to work better on many
systems that add topologies and cpus after booting
- other minor changes and cleanups
All of the cpu handling patches have been acked by the respective
maintainers and are coming in here in one series. Everything has been
in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeOrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymtcwCffzvKKkSY9qAp6+0v2WQNkZm1JWoAoJCPYUwF
If6wEoPLWvRfKx4gIoq9
=D96r
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are the set of driver core and kernfs changes for 6.8-rc1.
Nothing major in here this release cycle, just lots of small cleanups
and some tweaks on kernfs that in the very end, got reverted and will
come back in a safer way next release cycle.
Included in here are:
- more driver core 'const' cleanups and fixes
- fw_devlink=rpm is now the default behavior
- kernfs tiny changes to remove some string functions
- cpu handling in the driver core is updated to work better on many
systems that add topologies and cpus after booting
- other minor changes and cleanups
All of the cpu handling patches have been acked by the respective
maintainers and are coming in here in one series. Everything has been
in linux-next for a while with no reported issues"
* tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (51 commits)
Revert "kernfs: convert kernfs_idr_lock to an irq safe raw spinlock"
kernfs: convert kernfs_idr_lock to an irq safe raw spinlock
class: fix use-after-free in class_register()
PM: clk: make pm_clk_add_notifier() take a const pointer
EDAC: constantify the struct bus_type usage
kernfs: fix reference to renamed function
driver core: device.h: fix Excess kernel-doc description warning
driver core: class: fix Excess kernel-doc description warning
driver core: mark remaining local bus_type variables as const
driver core: container: make container_subsys const
driver core: bus: constantify subsys_register() calls
driver core: bus: make bus_sort_breadthfirst() take a const pointer
kernfs: d_obtain_alias(NULL) will do the right thing...
driver core: Better advertise dev_err_probe()
kernfs: Convert kernfs_path_from_node_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_name_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_walk_ns() from strlcpy() to strscpy()
initramfs: Expose retained initrd as sysfs file
fs/kernfs/dir: obey S_ISGID
kernel/cgroup: use kernfs_create_dir_ns()
...
Petr Machata says:
====================
mlxsw: Miscellaneous fixes
This patchset is a bric-a-brac of fixes for bugs impacting mlxsw.
- Patches #1 and #2 fix issues in ACL handling error paths.
- Patch #3 fixes stack corruption in ACL code that a recent FW update
has uncovered.
- Patch #4 fixes an issue in handling of IPIP next hops.
- Patch #5 fixes a typo in a the qos_pfc selftest
- Patch #6 fixes the same selftest to work with 8-lane ports.
====================
Link: https://lore.kernel.org/r/cover.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'qos_pfc' test checks PFC behavior. The idea is to limit the traffic
using a shaper somewhere in the flow of the packets. In this area, the
buffer is smaller than the buffer at the beginning of the flow, so it fills
up until there is no more space left. The test configures there PFC
which is supposed to notice that the headroom is filling up and send PFC
Xoff to indicate the transmitter to stop sending traffic for the priorities
sharing this PG.
The Xon/Xoff threshold is auto-configured and always equal to
2*(MTU rounded up to cell size). Even after sending the PFC Xoff packet,
traffic will keep arriving until the transmitter receives and processes
the PFC packet. This amount of traffic is known as the PFC delay allowance.
Currently the buffer for the delay traffic is configured as 100KB. The
MTU in the test is 10KB, therefore the threshold for Xoff is about 20KB.
This allows 80KB extra to be stored in this buffer.
8-lane ports use two buffers among which the configured buffer is split,
the Xoff threshold then applies to each buffer in parallel.
The test does not take into account the behavior of 8-lane ports, when the
ports are configured to 400Gbps with 8 lanes or 800Gbps with 8 lanes,
packets are dropped and the test fails.
Check if the relevant ports use 8 lanes, in such case double the size of
the buffer, as the headroom is split half-half.
Cc: Shuah Khan <shuah@kernel.org>
Fixes: bfa804784e ("selftests: mlxsw: Add a PFC test")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/23ff11b7dff031eb04a41c0f5254a2b636cd8ebb.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the diagram of the topology, $swp3 and $swp4 are described as 1Gbps
ports. This is wrong information, the test does not configure such speed.
Cc: Shuah Khan <shuah@kernel.org>
Fixes: bfa804784e ("selftests: mlxsw: Add a PFC test")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/0087e2d416aff7e444d15f7c2958fc1d438dc27e.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If there are IPIP nexthops at the time when the driver is loaded (or the
devlink instance reloaded), the driver looks up the corresponding IPIP
entry. But IPIP entries are only created as a result of netdevice
notifications. Since the netdevice notifier is registered after the nexthop
notifier, mlxsw_sp_nexthop_type_init() never finds the IPIP entry,
registers the nexthop MLXSW_SP_NEXTHOP_TYPE_ETH, and fails to assign a CRIF
to the nexthop. Later on when the CRIF is necessary, the WARN_ON in
mlxsw_sp_nexthop_rif() triggers, causing the splat [1].
In order to fix the issue, reorder the netdevice notifier to be registered
before the nexthop one.
[1] (edited for clarity):
WARNING: CPU: 1 PID: 1364 at drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3245 mlxsw_sp_nexthop_rif (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3246 (discriminator 1)) mlxsw_spectrum
Hardware name: Mellanox Technologies Ltd. MSN4410/VMOD0010, BIOS 5.11 01/06/2019
Call Trace:
? mlxsw_sp_nexthop_rif (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3246 (discriminator 1)) mlxsw_spectrum
__mlxsw_sp_nexthop_eth_update (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3637) mlxsw_spectrum
mlxsw_sp_nexthop_update (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3679 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3727) mlxsw_spectrum
mlxsw_sp_nexthop_group_update (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3757) mlxsw_spectrum
mlxsw_sp_nexthop_group_refresh (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4112) mlxsw_spectrum
mlxsw_sp_nexthop_obj_event (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5118 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5191 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5315 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5500) mlxsw_spectrum
nexthops_dump (net/ipv4/nexthop.c:217 net/ipv4/nexthop.c:440 net/ipv4/nexthop.c:3609)
register_nexthop_notifier (net/ipv4/nexthop.c:3624)
mlxsw_sp_router_init (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:11486) mlxsw_spectrum
mlxsw_sp_init (drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3267) mlxsw_spectrum
__mlxsw_core_bus_device_register (drivers/net/ethernet/mellanox/mlxsw/core.c:2202) mlxsw_core
mlxsw_devlink_core_bus_device_reload_up (drivers/net/ethernet/mellanox/mlxsw/core.c:2265 drivers/net/ethernet/mellanox/mlxsw/core.c:1603) mlxsw_core
devlink_reload (net/devlink/dev.c:314 net/devlink/dev.c:475)
[...]
Fixes: 9464a3d68e ("mlxsw: spectrum_router: Track next hops at CRIFs")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/74edb8d45d004e8d8f5318eede6ccc3d786d8ba9.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When tc filters are first added to a net device, the corresponding local
port gets bound to an ACL group in the device. The group contains a list
of ACLs. In turn, each ACL points to a different TCAM region where the
filters are stored. During forwarding, the ACLs are sequentially
evaluated until a match is found.
One reason to place filters in different regions is when they are added
with decreasing priorities and in an alternating order so that two
consecutive filters can never fit in the same region because of their
key usage.
In Spectrum-2 and newer ASICs the firmware started to report that the
maximum number of ACLs in a group is more than 16, but the layout of the
register that configures ACL groups (PAGT) was not updated to account
for that. It is therefore possible to hit stack corruption [1] in the
rare case where more than 16 ACLs in a group are required.
Fix by limiting the maximum ACL group size to the minimum between what
the firmware reports and the maximum ACLs that fit in the PAGT register.
Add a test case to make sure the machine does not crash when this
condition is hit.
[1]
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: mlxsw_sp_acl_tcam_group_update+0x116/0x120
[...]
dump_stack_lvl+0x36/0x50
panic+0x305/0x330
__stack_chk_fail+0x15/0x20
mlxsw_sp_acl_tcam_group_update+0x116/0x120
mlxsw_sp_acl_tcam_group_region_attach+0x69/0x110
mlxsw_sp_acl_tcam_vchunk_get+0x492/0xa20
mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0
mlxsw_sp_acl_rule_add+0x47/0x240
mlxsw_sp_flower_replace+0x1a9/0x1d0
tc_setup_cb_add+0xdc/0x1c0
fl_hw_replace_filter+0x146/0x1f0
fl_change+0xc17/0x1360
tc_new_tfilter+0x472/0xb90
rtnetlink_rcv_msg+0x313/0x3b0
netlink_rcv_skb+0x58/0x100
netlink_unicast+0x244/0x390
netlink_sendmsg+0x1e4/0x440
____sys_sendmsg+0x164/0x260
___sys_sendmsg+0x9a/0xe0
__sys_sendmsg+0x7a/0xc0
do_syscall_64+0x40/0xe0
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Fixes: c3ab435466 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC")
Reported-by: Orel Hagag <orelh@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/2d91c89afba59c22587b444994ae419dbea8d876.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When calling mlxsw_sp_acl_tcam_region_destroy() from an error path after
failing to attach the region to an ACL group, we hit a NULL pointer
dereference upon 'region->group->tcam' [1].
Fix by retrieving the 'tcam' pointer using mlxsw_sp_acl_to_tcam().
[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
RIP: 0010:mlxsw_sp_acl_tcam_region_destroy+0xa0/0xd0
[...]
Call Trace:
mlxsw_sp_acl_tcam_vchunk_get+0x88b/0xa20
mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0
mlxsw_sp_acl_rule_add+0x47/0x240
mlxsw_sp_flower_replace+0x1a9/0x1d0
tc_setup_cb_add+0xdc/0x1c0
fl_hw_replace_filter+0x146/0x1f0
fl_change+0xc17/0x1360
tc_new_tfilter+0x472/0xb90
rtnetlink_rcv_msg+0x313/0x3b0
netlink_rcv_skb+0x58/0x100
netlink_unicast+0x244/0x390
netlink_sendmsg+0x1e4/0x440
____sys_sendmsg+0x164/0x260
___sys_sendmsg+0x9a/0xe0
__sys_sendmsg+0x7a/0xc0
do_syscall_64+0x40/0xe0
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Fixes: 22a677661f ("mlxsw: spectrum: Introduce ACL core with simple TCAM implementation")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/fb6a4542bbc9fcab5a523802d97059bffbca7126.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lately, a bug was found when many TC filters are added - at some point,
several bugs are printed to dmesg [1] and the switch is crashed with
segmentation fault.
The issue starts when gen_pool_free() fails because of unexpected
behavior - a try to free memory which is already freed, this leads to BUG()
call which crashes the switch and makes many other bugs.
Trying to track down the unexpected behavior led to a bug in eRP code. The
function mlxsw_sp_acl_erp_table_alloc() gets a pointer to the allocated
index, sets the value and returns an error code. When gen_pool_alloc()
fails it returns address 0, we track it and return -ENOBUFS outside, BUT
the call for gen_pool_alloc() already override the index in erp_table
structure. This is a problem when such allocation is done as part of
table expansion. This is not a new table, which will not be used in case
of allocation failure. We try to expand eRP table and override the
current index (non-zero) with zero. Then, it leads to an unexpected
behavior when address 0 is freed twice. Note that address 0 is valid in
erp_table->base_index and indeed other tables use it.
gen_pool_alloc() fails in case that there is no space left in the
pre-allocated pool, in our case, the pool is limited to
ACL_MAX_ERPT_BANK_SIZE, which is read from hardware. When more than max
erp entries are required, we exceed the limit and return an error, this
error leads to "Failed to migrate vregion" print.
Fix this by changing erp_table->base_index only in case of a successful
allocation.
Add a test case for such a scenario. Without this fix it causes
segmentation fault:
$ TESTS="max_erp_entries_test" ./tc_flower.sh
./tc_flower.sh: line 988: 1560 Segmentation fault tc filter del dev $h2 ingress chain $i protocol ip pref $i handle $j flower &>/dev/null
[1]:
kernel BUG at lib/genalloc.c:508!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 6 PID: 3531 Comm: tc Not tainted 6.7.0-rc5-custom-ga6893f479f5e #1
Hardware name: Mellanox Technologies Ltd. MSN4700/VMOD0010, BIOS 5.11 07/12/2021
RIP: 0010:gen_pool_free_owner+0xc9/0xe0
...
Call Trace:
<TASK>
__mlxsw_sp_acl_erp_table_other_dec+0x70/0xa0 [mlxsw_spectrum]
mlxsw_sp_acl_erp_mask_destroy+0xf5/0x110 [mlxsw_spectrum]
objagg_obj_root_destroy+0x18/0x80 [objagg]
objagg_obj_destroy+0x12c/0x130 [objagg]
mlxsw_sp_acl_erp_mask_put+0x37/0x50 [mlxsw_spectrum]
mlxsw_sp_acl_ctcam_region_entry_remove+0x74/0xa0 [mlxsw_spectrum]
mlxsw_sp_acl_ctcam_entry_del+0x1e/0x40 [mlxsw_spectrum]
mlxsw_sp_acl_tcam_ventry_del+0x78/0xd0 [mlxsw_spectrum]
mlxsw_sp_flower_destroy+0x4d/0x70 [mlxsw_spectrum]
mlxsw_sp_flow_block_cb+0x73/0xb0 [mlxsw_spectrum]
tc_setup_cb_destroy+0xc1/0x180
fl_hw_destroy_filter+0x94/0xc0 [cls_flower]
__fl_delete+0x1ac/0x1c0 [cls_flower]
fl_destroy+0xc2/0x150 [cls_flower]
tcf_proto_destroy+0x1a/0xa0
...
mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion
mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion
Fixes: f465261aa1 ("mlxsw: spectrum_acl: Implement common eRP core")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/4cfca254dfc0e5d283974801a24371c7b6db5989.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This doc hasn't been touched in a while, in the meantime some
new io schedulers were added (e.g. all of mq), some with ioprio
support.
Also reword the introduction to remove reference to CFQ and the
limitation that io priorities only work on reads, which is no longer
true.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/a86cfdc8-016f-40f1-8b58-0cb15d2a792c@arm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__loop_update_dio only checks the alignment requirement for block backed
file systems, but misses them for the case where the loop device is
created directly on top of another block device. Due to this creating
a loop device with default option plus the direct I/O flag on a > 512 byte
sector size file system will lead to incorrect I/O being submitted to the
lower block device and a lot of error from the lock layer. This can
be seen with xfstests generic/563.
Fix the code in __loop_update_dio by factoring the alignment check into
a helper, and calling that also for the struct block_device of a block
device inode.
Also remove the TODO comment talking about dynamically switching between
buffered and direct I/O, which is a would be a recipe for horrible
performance and occasional data loss.
Fixes: 2e5ab5f379 ("block: loop: prepare for supporing direct IO")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240117175901.871796-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Using the address operator on the array doesn't work:
./include/linux/seq_buf.h:27:27: error: initialization of ‘char *’
from incompatible pointer type ‘char (*)[128]’
[-Werror=incompatible-pointer-types]
27 | .buffer = &__ ## NAME ## _buffer, \
| ^
Apart from fixing that, we can improve DECLARE_SEQ_BUF() by using a
compound literal to define the buffer array without attaching a name
to it. This makes the macro a single statement, allowing constructs
such as:
static DECLARE_SEQ_BUF(my_seq_buf, MYSB_SIZE);
to work as intended.
Link: https://lkml.kernel.org/r/20240116-declare-seq-buf-fix-v1-1-915db4692f32@linux.ibm.com
Cc: stable@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Fixes: dcc4e5728e ("seq_buf: Introduce DECLARE_SEQ_BUF and seq_buf_str()")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Accessing an ethernet device that is powered off or clock gated might
cause the CPU to hang. Add ethnl_ops_begin/complete in
ethnl_set_features() to protect against this.
Fixes: 0980bfcd69 ("ethtool: set netdev features with FEATURES_SET request")
Signed-off-by: Ludvig Pärsson <ludvig.parsson@axis.com>
Link: https://lore.kernel.org/r/20240117-etht2-v2-1-1a96b6e8c650@axis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove the errant blank lines to make the desired empty row separators
around the Fujitsu and ASR entries in the main table, rather than them
being their own separate tables which then look odd in the HTML view.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/b6637654eda761e224f828a44a7bbc1eadf2ef88.1705511145.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
When sme_alloc() is called with existing storage and we are not flushing we
will always allocate new storage, both leaking the existing storage and
corrupting the state. Fix this by separating the checks for flushing and
for existing storage as we do for SVE.
Callers that reallocate (eg, due to changing the vector length) should
call sme_free() themselves.
Fixes: 5d0a8d2fba ("arm64/ptrace: Ensure that SME is set up for target when writing SSVE state")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240115-arm64-sme-flush-v1-1-7472bd3459b7@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
There is no need to check for SVE support when changing vector lengths,
even if the system is SME only we still need SVE storage for the streaming
SVE state.
Fixes: d4d5be94a8 ("arm64/fpsimd: Ensure SME storage is allocated after SVE VL changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240115-arm64-sve-enabled-check-v1-1-a26360b00f6d@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
When writing ZA we currently unconditionally flush the buffer used to store
it as part of ensuring that it is allocated. Since this buffer is shared
with ZT0 this means that a write to ZA when PSTATE.ZA is already set will
corrupt the value of ZT0 on a SME2 system. Fix this by only flushing the
backing storage if PSTATE.ZA was not previously set.
This will mean that short or failed writes may leave stale data in the
buffer, this seems as correct as our current behaviour and unlikely to be
something that userspace will rely on.
Fixes: f90b529bcb ("arm64/sme: Implement ZT0 ptrace support")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240115-arm64-fix-ptrace-za-zt-v1-1-48617517028a@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
For historical reasons, the non-KPTI exception return path is duplicated for
EL1 and EL0, with the structure:
.if \el == 0
[ KPTI handling ]
ldr lr, [sp, #S_LR]
add sp, sp, #PT_REGS_SIZE // restore sp
[ EL0 exception return workaround ]
eret
.else
ldr lr, [sp, #S_LR]
add sp, sp, #PT_REGS_SIZE // restore sp
[ EL1 exception return workaround ]
eret
.endif
sb
This would be simpler and clearer with the common portions factored out,
e.g.
.if \el == 0
[ KPTI handling ]
.endif
ldr lr, [sp, #S_LR]
add sp, sp, #PT_REGS_SIZE // restore sp
.if \el == 0
[ EL0 exception return workaround ]
.else
[ EL1 exception return workaround ]
.endif
eret
sb
This expands to the same code, but is simpler for a human to follow as
it avoids duplicates the restore of LR+SP, and makes it clear that the
ERET is associated with the SB.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240116110221.420467-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently the ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround isn't
quite right, as it is supposed to be applied after the last explicit
memory access, but is immediately followed by an LDR.
The ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround is used to
handle Cortex-A520 erratum 2966298 and Cortex-A510 erratum 3117295,
which are described in:
* https://developer.arm.com/documentation/SDEN2444153/0600/?lang=en
* https://developer.arm.com/documentation/SDEN1873361/1600/?lang=en
In both cases the workaround is described as:
| If pagetable isolation is disabled, the context switch logic in the
| kernel can be updated to execute the following sequence on affected
| cores before exiting to EL0, and after all explicit memory accesses:
|
| 1. A non-shareable TLBI to any context and/or address, including
| unused contexts or addresses, such as a `TLBI VALE1 Xzr`.
|
| 2. A DSB NSH to guarantee completion of the TLBI.
The important part being that the TLBI+DSB must be placed "after all
explicit memory accesses".
Unfortunately, as-implemented, the TLBI+DSB is immediately followed by
an LDR, as we have:
| alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
| tlbi vale1, xzr
| dsb nsh
| alternative_else_nop_endif
| alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0
| ldr lr, [sp, #S_LR]
| add sp, sp, #PT_REGS_SIZE // restore sp
| eret
| alternative_else_nop_endif
|
| [ ... KPTI exception return path ... ]
This patch fixes this by reworking the logic to place the TLBI+DSB
immediately before the ERET, after all explicit memory accesses.
The ERET is currently in a separate alternative block, and alternatives
cannot be nested. To account for this, the alternative block for
ARM64_UNMAP_KERNEL_AT_EL0 is replaced with a single alternative branch
to skip the KPTI logic, with the new shape of the logic being:
| alternative_insn "b .L_skip_tramp_exit_\@", nop, ARM64_UNMAP_KERNEL_AT_EL0
| [ ... KPTI exception return path ... ]
| .L_skip_tramp_exit_\@:
|
| ldr lr, [sp, #S_LR]
| add sp, sp, #PT_REGS_SIZE // restore sp
|
| alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
| tlbi vale1, xzr
| dsb nsh
| alternative_else_nop_endif
| eret
The new structure means that the workaround is only applied when KPTI is
not in use; this is fine as noted in the documented implications of the
erratum:
| Pagetable isolation between EL0 and higher level ELs prevents the
| issue from occurring.
... and as per the workaround description quoted above, the workaround
is only necessary "If pagetable isolation is disabled".
Fixes: 471470bc70 ("arm64: errata: Add Cortex-A520 speculative unprivileged load workaround")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240116110221.420467-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
As a followup to commit 03fb8565c8 ("selftests: bonding: add missing
build configs"), add more networking-specific config options which are
needed for bonding tests.
For testing, I used the minimal config generated by virtme-ng and I added
the options in the config file. All bonding tests passed.
Fixes: bbb774d921 ("net: Add tests for bonding and team address list management") # for ipv6
Fixes: 6cbe791c0f ("kselftest: bonding: add num_grat_arp test") # for tc options
Fixes: 222c94ec0a ("selftests: bonding: add tests for ether type changes") # for nlmon
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240116154926.202164-1-bpoirier@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
netdevsim tests aren't very well integrated with kselftest,
which has its advantages and disadvantages. But regardless
of the intended integration - a config file to know what kernel
to build is very useful, add one.
Fixes: fc4c93f145 ("selftests: add basic netdevsim devlink flash testing")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240116154311.1945801-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andrii Nakryiko says:
====================
Tighten up arg:ctx type enforcement
Follow up fixes for kernel-side and libbpf-side logic around handling arg:ctx
(__arg_ctx) tagged arguments of BPF global subprogs.
Patch #1 adds libbpf feature detection of kernel-side __arg_ctx support to
avoid unnecessary rewriting BTF types. With stricter kernel-side type
enforcement this is now mandatory to avoid problems with using `struct
bpf_user_pt_regs_t` instead of actual typedef. For __arg_ctx tagged arguments
verifier is now supporting either `bpf_user_pt_regs_t` typedef or resolves it
down to the actual struct (pt_regs/user_pt_regs/user_regs_struct), depending
on architecture), but for old kernels without __arg_ctx support it's more
backwards compatible for libbpf to use `struct bpf_user_pt_regs_t` rewrite
which will work on wider range of kernels. So feature detection prevent libbpf
accidentally breaking global subprogs on new kernels.
We also adjust selftests to do similar feature detection (much simpler, but
potentially breaking due to kernel source code refactoring, which is fine for
selftests), and skip tests expecting libbpf's BTF type rewrites.
Patch #2 is preparatory refactoring for patch #3 which adds type enforcement
for arg:ctx tagged global subprog args. See the patch for specifics.
Patch #4 adds many new cases to ensure type logic works as expected.
Finally, patch #5 adds a relevant subset of kernel-side type checks to
__arg_ctx cases that libbpf supports rewrite of. In libbpf's case, type
violations are reported as warnings and BTF rewrite is not performed, which
will eventually lead to BPF verifier complaining at program verification time.
Good care was taken to avoid conflicts between bpf and bpf-next tree (which
has few follow up refactorings in the same code area). Once trees converge
some of the code will be moved around a bit (and some will be deleted), but
with no change to functionality or general shape of the code.
v2->v3:
- support `bpf_user_pt_regs_t` typedef for KPROBE and PERF_EVENT (CI);
v1->v2:
- add user_pt_regs and user_regs_struct support for PERF_EVENT (CI);
- drop FEAT_ARG_CTX_TAG enum leftover from patch #1;
- fix warning about default: without break in the switch (CI).
====================
Link: https://lore.kernel.org/r/20240118033143.3384355-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
On kernel that don't support arg:ctx tag, before adjusting global
subprog BTF information to match kernel's expected canonical type names,
make sure that types used by user are meaningful, and if not, warn and
don't do BTF adjustments.
This is similar to checks that kernel performs, but narrower in scope,
as only a small subset of BPF program types can be accommodated by
libbpf using canonical type names.
Libbpf unconditionally allows `struct pt_regs *` for perf_event program
types, unlike kernel, which supports that conditionally on architecture.
This is done to keep things simple and not cause unnecessary false
positives. This seems like a minor and harmless deviation, which in
real-world programs will be caught by kernels with arg:ctx tag support
anyways. So KISS principle.
This logic is hard to test (especially on latest kernels), so manual
testing was performed instead. Libbpf emitted the following warning for
perf_event program with wrong context argument type:
libbpf: prog 'arg_tag_ctx_perf': subprog 'subprog_ctx_tag' arg#0 is expected to be of `struct bpf_perf_event_data *` type
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240118033143.3384355-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a bunch of global subprogs across variety of program types to
validate expected kernel type enforcement logic for __arg_ctx arguments.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240118033143.3384355-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add enforcement of expected types for context arguments tagged with
arg:ctx (__arg_ctx) tag.
First, any program type will accept generic `void *` context type when
combined with __arg_ctx tag.
Besides accepting "canonical" struct names and `void *`, for a bunch of
program types for which program context is actually a named struct, we
allows a bunch of pragmatic exceptions to match real-world and expected
usage:
- for both kprobes and perf_event we allow `bpf_user_pt_regs_t *` as
canonical context argument type, where `bpf_user_pt_regs_t` is a
*typedef*, not a struct;
- for kprobes, we also always accept `struct pt_regs *`, as that's what
actually is passed as a context to any kprobe program;
- for perf_event, we resolve typedefs (unless it's `bpf_user_pt_regs_t`)
down to actual struct type and accept `struct pt_regs *`, or
`struct user_pt_regs *`, or `struct user_regs_struct *`, depending
on the actual struct type kernel architecture points `bpf_user_pt_regs_t`
typedef to; otherwise, canonical `struct bpf_perf_event_data *` is
expected;
- for raw_tp/raw_tp.w programs, `u64/long *` are accepted, as that's
what's expected with BPF_PROG() usage; otherwise, canonical
`struct bpf_raw_tracepoint_args *` is expected;
- tp_btf supports both `struct bpf_raw_tracepoint_args *` and `u64 *`
formats, both are coded as expections as tp_btf is actually a TRACING
program type, which has no canonical context type;
- iterator programs accept `struct bpf_iter__xxx *` structs, currently
with no further iterator-type specific enforcement;
- fentry/fexit/fmod_ret/lsm/struct_ops all accept `u64 *`;
- classic tracepoint programs, as well as syscall and freplace
programs allow any user-provided type.
In all other cases kernel will enforce exact match of struct name to
expected canonical type. And if user-provided type doesn't match that
expectation, verifier will emit helpful message with expected type name.
Note a bit unnatural way the check is done after processing all the
arguments. This is done to avoid conflict between bpf and bpf-next
trees. Once trees converge, a small follow up patch will place a simple
btf_validate_prog_ctx_type() check into a proper ARG_PTR_TO_CTX branch
(which bpf-next tree patch refactored already), removing duplicated
arg:ctx detection logic.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240118033143.3384355-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
