Each RPMh VRM accelerator resource has 3 or 4 contiguous 4-byte aligned
addresses associated with it. These control voltage, enable state, mode,
and in legacy targets, voltage headroom. The current in-flight request
checking logic looks for exact address matches. Requests for different
addresses of the same RPMh resource as thus not detected as in-flight.
Add new cmd-db API cmd_db_match_resource_addr() to enhance the in-flight
request check for VRM requests by ignoring the address offset.
This ensures that only one request is allowed to be in-flight for a given
VRM resource. This is needed to avoid scenarios where request commands are
carried out by RPMh hardware out-of-order leading to LDO regulator
over-current protection triggering.
Fixes: 658628e7ef ("drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Elliot Berman <quic_eberman@quicinc.com> # sm8650-qrd
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Link: https://lore.kernel.org/r/20240215-rpmh-rsc-fixes-v4-1-9cbddfcba05b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In case the client is registered after the pmic-glink recived a response
from the Protection Domain mapper, it is going to miss the notification
about the state. Notify clients about the current state upon
registration.
Fixes: 58ef4ece1e ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Tested-by: Xilin Wu <wuxilin123@gmail.com> # on QCS8550 AYN Odin 2
Link: https://lore.kernel.org/r/20240403-pmic-glink-fix-clients-v2-2-aed4e02baacc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Take the client_lock before traversing the clients list at the
pmic_glink_state_notify_clients() function. This is required to keep the
list traversal safe from concurrent modification.
Fixes: 58ef4ece1e ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Tested-by: Xilin Wu <wuxilin123@gmail.com> # on QCS8550 AYN Odin 2
Link: https://lore.kernel.org/r/20240403-pmic-glink-fix-clients-v2-1-aed4e02baacc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm PMIC ChargerPD ULOG and RPM Master Statistics drivers are
solely for debugging purposes and should not be autoloaded as modules.
Add comments to annotate missing MODULE_DEVICE_TABLE.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240410184522.271889-1-krzk@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Current release - regressions:
- rxrpc: fix use of page_frag_alloc_align(), it changed semantics
and we added a new caller in a different subtree
- xfrm: allow UDP encapsulation only in offload modes
Current release - new code bugs:
- tcp: fix refcnt handling in __inet_hash_connect()
- Revert "net: Re-use and set mono_delivery_time bit for userspace tstamp
packets", conflicted with some expectations in BPF uAPI
Previous releases - regressions:
- ipv4: raw: fix sending packets from raw sockets via IPsec tunnels
- devlink: fix devlink's parallel command processing
- veth: do not manipulate GRO when using XDP
- esp: fix bad handling of pages from page_pool
Previous releases - always broken:
- report RCU QS for busy network kthreads (with Paul McK's blessing)
- tcp/rds: fix use-after-free on netns with kernel TCP reqsk
- virt: vmxnet3: fix missing reserved tailroom with XDP
Misc:
- couple of build fixes for Documentation
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=gpLl
-----END PGP SIGNATURE-----
Merge tag 'net-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, netfilter, wireguard and IPsec.
I'd like to highlight [ lowlight? - Linus ] Florian W stepping down as
a netfilter maintainer due to constant stream of bug reports. Not sure
what we can do but IIUC this is not the first such case.
Current release - regressions:
- rxrpc: fix use of page_frag_alloc_align(), it changed semantics and
we added a new caller in a different subtree
- xfrm: allow UDP encapsulation only in offload modes
Current release - new code bugs:
- tcp: fix refcnt handling in __inet_hash_connect()
- Revert "net: Re-use and set mono_delivery_time bit for userspace
tstamp packets", conflicted with some expectations in BPF uAPI
Previous releases - regressions:
- ipv4: raw: fix sending packets from raw sockets via IPsec tunnels
- devlink: fix devlink's parallel command processing
- veth: do not manipulate GRO when using XDP
- esp: fix bad handling of pages from page_pool
Previous releases - always broken:
- report RCU QS for busy network kthreads (with Paul McK's blessing)
- tcp/rds: fix use-after-free on netns with kernel TCP reqsk
- virt: vmxnet3: fix missing reserved tailroom with XDP
Misc:
- couple of build fixes for Documentation"
* tag 'net-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits)
selftests: forwarding: Fix ping failure due to short timeout
MAINTAINERS: step down as netfilter maintainer
netfilter: nf_tables: Fix a memory leak in nf_tables_updchain
net: dsa: mt7530: fix handling of all link-local frames
net: dsa: mt7530: fix link-local frames that ingress vlan filtering ports
bpf: report RCU QS in cpumap kthread
net: report RCU QS on threaded NAPI repolling
rcu: add a helper to report consolidated flavor QS
ionic: update documentation for XDP support
lib/bitmap: Fix bitmap_scatter() and bitmap_gather() kernel doc
netfilter: nf_tables: do not compare internal table flags on updates
netfilter: nft_set_pipapo: release elements in clone only from destroy path
octeontx2-af: Use separate handlers for interrupts
octeontx2-pf: Send UP messages to VF only when VF is up.
octeontx2-pf: Use default max_active works instead of one
octeontx2-pf: Wait till detach_resources msg is complete
octeontx2: Detect the mbox up or down message via register
devlink: fix port new reply cmd type
tcp: Clear req->syncookie in reqsk_alloc().
net/bnx2x: Prevent access to a freed page in page_pool
...
These are changes that for some reason ended up not making it into the
first four branches but that should still make it into 6.9:
- A rework of the omap clock support that touches both drivers and
device tree files
- The reset controller branch changes that had a dependency on late
bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the
drivers branch
- The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree
changes that got delayed and needed some extra time in linux-next
for wider testing.
-----BEGIN PGP SIGNATURE-----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=IzoE
-----END PGP SIGNATURE-----
Merge tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM SoC updates from Arnd Bergmann:
"These are changes that for some reason ended up not making it into the
first four branches but that should still make it into 6.9:
- A rework of the omap clock support that touches both drivers and
device tree files
- The reset controller branch changes that had a dependency on late
bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the
drivers branch
- The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree
changes that got delayed and needed some extra time in linux-next
for wider testing"
* tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
soc: fsl: dpio: fix kcalloc() argument order
bus: ts-nbus: Improve error reporting
bus: ts-nbus: Convert to atomic pwm API
riscv: dts: starfive: jh7110: Add camera subsystem nodes
ARM: bcm: stop selecing CONFIG_TICK_ONESHOT
ARM: dts: omap3: Update clksel clocks to use reg instead of ti,bit-shift
ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift
clk: ti: Improve clksel clock bit parsing for reg property
clk: ti: Handle possible address in the node name
dt-bindings: pwm: opencores: Add compatible for StarFive JH8100
dt-bindings: riscv: cpus: reg matches hart ID
reset: Instantiate reset GPIO controller for shared reset-gpios
reset: gpio: Add GPIO-based reset controller
cpufreq: do not open-code of_phandle_args_equal()
of: Add of_phandle_args_equal() helper
reset: simple: add support for Sophgo SG2042
dt-bindings: reset: sophgo: support SG2042
riscv: dts: microchip: add specific compatible for mpfs pdma
riscv: dts: microchip: add missing CAN bus clocks
ARM: brcmstb: Add debug UART entry for 74165
...
- Fix memory leak in the error path at probe time in the Mediatek LVTS
driver (Christophe Jaillet).
- Fix control buffer enablement regression on Meditek MT7896 (Frank
Wunderlich).
- Drop spaces before TABs in different places: thermal-of, ST drivers
and Makefile (Geert Uytterhoeven).
- Adjust DT binding for NXP as fsl,tmu-range min/maxItems can vary
among several SoC versions (Fabio Estevam).
- Add support for the H616 THS controller on Sun8i platforms (Martin
Botka).
- Don't fail probe due to zone registration failure because there is
no trip points defined in the DT (Mark Brown).
- Support variable TMU array size for new platforms (Peng Fan).
- Adjust the DT binding for thermal-of and make the polling time not
required and assume it is zero when not found in the DT (Konrad
Dybcio).
- Add r8a779h0 support in both the DT and the rcar_gen3 driver (Geert
Uytterhoeven).
-----BEGIN PGP SIGNATURE-----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=jtjA
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These update thermal drivers for ARM platforms by adding new hardware
support (r8a779h0, H616 THS), addressing issues (Mediatek LVTS,
Mediatek MT7896, thermal-of) and cleaning up code.
Specifics:
- Fix memory leak in the error path at probe time in the Mediatek
LVTS driver (Christophe Jaillet)
- Fix control buffer enablement regression on Meditek MT7896 (Frank
Wunderlich)
- Drop spaces before TABs in different places: thermal-of, ST drivers
and Makefile (Geert Uytterhoeven)
- Adjust DT binding for NXP as fsl,tmu-range min/maxItems can vary
among several SoC versions (Fabio Estevam)
- Add support for the H616 THS controller on Sun8i platforms (Martin
Botka)
- Don't fail probe due to zone registration failure because there is
no trip points defined in the DT (Mark Brown)
- Support variable TMU array size for new platforms (Peng Fan)
- Adjust the DT binding for thermal-of and make the polling time not
required and assume it is zero when not found in the DT (Konrad
Dybcio)
- Add r8a779h0 support in both the DT and the rcar_gen3 driver (Geert
Uytterhoeven)"
* tag 'thermal-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/rcar_gen3: Add support for R-Car V4M
dt-bindings: thermal: rcar-gen3-thermal: Add r8a779h0 support
thermal/of: Assume polling-delay(-passive) 0 when absent
dt-bindings: thermal-zones: Don't require polling-delay(-passive)
thermal/drivers/qoriq: Fix getting tmu range
thermal/drivers/sun8i: Don't fail probe due to zone registration failure
thermal/drivers/sun8i: Add support for H616 THS controller
thermal/drivers/sun8i: Add SRAM register access code
thermal/drivers/sun8i: Extend H6 calibration to support 4 sensors
thermal/drivers/sun8i: Explain unknown H6 register value
dt-bindings: thermal: sun8i: Add H616 THS controller
soc: sunxi: sram: export register 0 for THS on H616
dt-bindings: thermal: qoriq-thermal: Adjust fsl,tmu-range min/maxItems
thermal: Drop spaces before TABs
thermal/drivers/mediatek: Fix control buffer enablement on MT7896
thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error handling path
Add SoC Info support for the X1E80100 platform.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240223-x1e80100-socinfo-v1-2-be581ca60f27@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
cmd-db and rpmh-rsc are used by clients like regulators, interconnects and
clocks for resource voting. These clients are in core_initcall() while
cmd-db and rpmh-rsc are in arch_initcall(). Update init level for these
drivers also to core_initcall() to avoid unnecessary probe defer during
boot up.
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240217-init_level-v1-1-bde9e11f8317@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: wangkaiyuan <wangkaiyuan@inspur.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240309072825.45385-1-wangkaiyuan@inspur.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DT core:
- Add cleanup.h based auto release of struct device_node pointers via
__free marking and new for_each_child_of_node_scoped() iterator to use
it.
- Always create a base skeleton DT when CONFIG_OF is enabled. This
supports several usecases of adding DT data on non-DT booted systems.
- Move around some /reserved-memory code in preparation for further
improvements
- Add a stub for_each_property_of_node() for !OF
- Adjust the printk levels on some messages
- Fix __be32 sparse warning
- Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
(currently orphaned)
- Add Saravana Kannan and drop Frank Rowand as DT maintainers
DT bindings:
- Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
xlnx,sd-fec to DT schemas
- Add existing, but undocumented fsl,imx-anatop binding
- Add bunch of undocumented vendor prefixes used in compatible strings
- Drop obsolete brcm,bcm2835-pm-wdt binding
- Drop obsolete i2c.txt which as been replaced with schema in dtschema
- Add DPS310 device and sort trivial-devices.yaml
- Enable undocumented compatible checks on DT binding examples
- More QCom maintainer fixes/updates
- Updates to writing-schema.rst and DT submitting-patches.rst to cover
some frequent review comments
- Clean-up SPDX tags to use 'OR' rather than 'or'
-----BEGIN PGP SIGNATURE-----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=YzNN
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add cleanup.h based auto release of struct device_node pointers via
__free marking and new for_each_child_of_node_scoped() iterator to
use it.
- Always create a base skeleton DT when CONFIG_OF is enabled. This
supports several usecases of adding DT data on non-DT booted
systems.
- Move around some /reserved-memory code in preparation for further
improvements
- Add a stub for_each_property_of_node() for !OF
- Adjust the printk levels on some messages
- Fix __be32 sparse warning
- Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
(currently orphaned)
- Add Saravana Kannan and drop Frank Rowand as DT maintainers
DT bindings:
- Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
xlnx,sd-fec to DT schemas
- Add existing, but undocumented fsl,imx-anatop binding
- Add bunch of undocumented vendor prefixes used in compatible
strings
- Drop obsolete brcm,bcm2835-pm-wdt binding
- Drop obsolete i2c.txt which as been replaced with schema in
dtschema
- Add DPS310 device and sort trivial-devices.yaml
- Enable undocumented compatible checks on DT binding examples
- More QCom maintainer fixes/updates
- Updates to writing-schema.rst and DT submitting-patches.rst to
cover some frequent review comments
- Clean-up SPDX tags to use 'OR' rather than 'or'"
* tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
of: unittest: Use for_each_child_of_node_scoped()
of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
of: Add cleanup.h based auto release via __free(device_node) markings
of: Move all FDT reserved-memory handling into of_reserved_mem.c
of: Add KUnit test to confirm DTB is loaded
of: unittest: treat missing of_root as error instead of fixing up
x86/of: Unconditionally call unflatten_and_copy_device_tree()
um: Unconditionally call unflatten_device_tree()
of: Create of_root if no dtb provided by firmware
of: Always unflatten in unflatten_and_copy_device_tree()
dt-bindings: timer: mediatek: Convert to json-schema
dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support
soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage
dt-bindings: fsl-imx-sdma: fix HDMI audio index
dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6
dt-bindings: soc: imx: fsl,imx-anatop: add binding
dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML
dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
of: make for_each_property_of_node() available to to !OF
...
driver (Christophe Jaillet)
- Fix control buffer enablement regression on Meditek MT7896 (Frank
Wunderlich)
- Drop spaces before TABs in different places: thermal-of, ST drivers
and Makefile (Geert Uytterhoeven)
- Adjust DT binding for NXP as fsl,tmu-range min/maxItems can vary
among several SoC versions (Fabio Estevam)
- Add support for H616 THS controller for the Sun8i platforms. Note
that this change relies on another change in the SoC specific code
which is included in this branch (Martin Botka)
- Don't fail probe due to zone registration failure because there is
no trip points defined in the DT (Mark Brown)
- Support variable TMU array size for new platforms (Peng Fan)
- Adjust the DT binding for thermal-of and make the polling time not
required and assume it is zero when not found in the DT (Konrad
Dybcio)
- Add r8a779h0 support in both the DT and the driver (Geert Uytterhoeven)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmXxqsUACgkQqDIjiipP
6E9jDgf+NpBl2l9Wb8EhFcB+QRcOY79rn8KzifM4XdU1qwoog3I64lt5mAcznpbf
7hLK9DQJYjuIx8oi/uxKaYSCno1bwuY/Vpi0/BBQ2DxhhX26C7XfZ+D4o1M3/ciZ
/jsoaXg3WMKYVeywaHohWxjWH+rLGXxmxDlfcAXlKdAZkbEKLCzsbaRaSy/H8Xhc
zk9Cr2RdV+HHcuAWK1TGEHUGXINSR5tk5TvY7QCfvLYsloGpSLi6vr68CAEpvBQB
6pxW8BkAWAVQy6pgP3WthzpE+ZkEnv1vhu7fn0uoEjuxedqvdj+PKDC4svm1k/pA
+8sV89A5RZi1zOoWWYj8TnH/K2W85w==
=rTh4
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.9-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge additional thermal control changes for 6.9-rc1 from Daniel Lezcano:
"- Fix memory leak in the error path at probe time in the Mediatek LVTS
driver (Christophe Jaillet)
- Fix control buffer enablement regression on Meditek MT7896 (Frank
Wunderlich)
- Drop spaces before TABs in different places: thermal-of, ST drivers
and Makefile (Geert Uytterhoeven)
- Adjust DT binding for NXP as fsl,tmu-range min/maxItems can vary
among several SoC versions (Fabio Estevam)
- Add support for H616 THS controller for the Sun8i platforms. Note
that this change relies on another change in the SoC specific code
which is included in this branch (Martin Botka)
- Don't fail probe due to zone registration failure because there is
no trip points defined in the DT (Mark Brown)
- Support variable TMU array size for new platforms (Peng Fan)
- Adjust the DT binding for thermal-of and make the polling time not
required and assume it is zero when not found in the DT (Konrad
Dybcio)
- Add r8a779h0 support in both the DT and the driver (Geert Uytterhoeven)"
* tag 'thermal-v6.9-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/rcar_gen3: Add support for R-Car V4M
dt-bindings: thermal: rcar-gen3-thermal: Add r8a779h0 support
thermal/of: Assume polling-delay(-passive) 0 when absent
dt-bindings: thermal-zones: Don't require polling-delay(-passive)
thermal/drivers/qoriq: Fix getting tmu range
thermal/drivers/sun8i: Don't fail probe due to zone registration failure
thermal/drivers/sun8i: Add support for H616 THS controller
thermal/drivers/sun8i: Add SRAM register access code
thermal/drivers/sun8i: Extend H6 calibration to support 4 sensors
thermal/drivers/sun8i: Explain unknown H6 register value
dt-bindings: thermal: sun8i: Add H616 THS controller
soc: sunxi: sram: export register 0 for THS on H616
dt-bindings: thermal: qoriq-thermal: Adjust fsl,tmu-range min/maxItems
thermal: Drop spaces before TABs
thermal/drivers/mediatek: Fix control buffer enablement on MT7896
thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error handling path
A previous bugfix added a call to kcalloc(), which starting in gcc-14
causes a harmless warning about the argument order:
drivers/soc/fsl/dpio/dpio-service.c: In function 'dpaa2_io_service_enqueue_multiple_desc_fq':
drivers/soc/fsl/dpio/dpio-service.c:526:29: error: 'kcalloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Werror=calloc-transposed-args]
526 | ed = kcalloc(sizeof(struct qbman_eq_desc), 32, GFP_KERNEL);
| ^~~~~~
drivers/soc/fsl/dpio/dpio-service.c:526:29: note: earlier argument should specify number of elements, later size of each element
Since the two are only multiplied, the order does not change the
behavior, so just fix it now to shut up the compiler warning.
Dmity independently came up with the same fix.
Fixes: 5c4a5999b2 ("soc: fsl: dpio: avoid stack usage warning")
Reported-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
smp_call_function always runs its callback in hard IRQ context, even on
PREEMPT_RT, where spinlocks can sleep. So we need to use a raw spinlock
for cgr_lock to ensure we aren't waiting on a sleeping task.
Although this bug has existed for a while, it was not apparent until
commit ef2a8d5478 ("net: dpaa: Adjust queue depth on rate change")
which invokes smp_call_function_single via qman_update_cgr_safe every
time a link goes up or down.
Fixes: 96f413f476 ("soc/fsl/qbman: fix issue in qman_delete_cgr_safe()")
CC: stable@vger.kernel.org
Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Closes: https://lore.kernel.org/all/20230323153935.nofnjucqjqnz34ej@skbuf/
Reported-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Closes: https://lore.kernel.org/linux-arm-kernel/87wmsyvclu.fsf@pengutronix.de/
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Camelia Groza <camelia.groza@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
smp_call_function_single disables IRQs when executing the callback. To
prevent deadlocks, we must disable IRQs when taking cgr_lock elsewhere.
This is already done by qman_update_cgr and qman_delete_cgr; fix the
other lockers.
Fixes: 96f413f476 ("soc/fsl/qbman: fix issue in qman_delete_cgr_safe()")
CC: stable@vger.kernel.org
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Camelia Groza <camelia.groza@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the usual mix of updates for drivers that are used on (mostly
ARM) SoCs with no other top-level subsystem tree, including:
- The SCMI firmware subsystem gains support for version 3.2 of the
specification and updates to the notification code.
- Feature updates for Tegra and Qualcomm platforms for added
hardware support.
- A number of platforms get soc_device additions for identifying newly
added chips from Renesas, Qualcomm, Mediatek and Google.
- Trivial improvements for firmware and memory drivers amongst
others, in particular 'const' annotations throughout multiple
subsystems.
-----BEGIN PGP SIGNATURE-----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=bV/K
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This is the usual mix of updates for drivers that are used on (mostly
ARM) SoCs with no other top-level subsystem tree, including:
- The SCMI firmware subsystem gains support for version 3.2 of the
specification and updates to the notification code
- Feature updates for Tegra and Qualcomm platforms for added hardware
support
- A number of platforms get soc_device additions for identifying
newly added chips from Renesas, Qualcomm, Mediatek and Google
- Trivial improvements for firmware and memory drivers amongst
others, in particular 'const' annotations throughout multiple
subsystems"
* tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
tee: make tee_bus_type const
soc: qcom: aoss: add missing kerneldoc for qmp members
soc: qcom: geni-se: drop unused kerneldoc struct geni_wrapper param
soc: qcom: spm: fix building with CONFIG_REGULATOR=n
bus: ti-sysc: constify the struct device_type usage
memory: stm32-fmc2-ebi: keep power domain on
memory: stm32-fmc2-ebi: add MP25 RIF support
memory: stm32-fmc2-ebi: add MP25 support
memory: stm32-fmc2-ebi: check regmap_read return value
dt-bindings: memory-controller: st,stm32: add MP25 support
dt-bindings: bus: imx-weim: convert to YAML
watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
MAINTAINERS: Update SCMI entry with HWMON driver
MAINTAINERS: samsung: gs101: match patches touching Google Tensor SoC
memory: tegra: Fix indentation
memory: tegra: Add BPMP and ICC info for DLA clients
memory: tegra: Correct DLA client names
dt-bindings: memory: renesas,rpc-if: Document R-Car V4M support
firmware: arm_scmi: Update the supported clock protocol version
...
The Allwinner H616 SoC contains a mysterious bit at register offset 0x0
in the SRAM control block. If bit 16 is set (the reset value), the
temperature readings of the THS are way off, leading to reports about
200C, at normal ambient temperatures. Clearing this bits brings the
reported values down to the expected values.
The BSP code clears this bit in firmware (U-Boot), and has an explicit
comment about this, but offers no real explanation.
Experiments in U-Boot show that register 0x0 has no effect on the SRAM C
visibility: all tested bit settings still allow full read and write
access by the CPU to the whole of SRAM C. Only bit 24 of the register at
offset 0x4 makes all of SRAM C inaccessible by the CPU. So modelling
the THS switch functionality as an SRAM region would not reflect reality.
Since we should not rely on firmware settings, allow other code (the THS
driver) to access this register, by exporting it through the already
existing regmap. This mimics what we already do for the LDO control and
the EMAC register.
To avoid concurrent accesses to the same register at the same time, by
the SRAM switch code and the regmap code, use the same lock to protect
the access. The regmap subsystem allows to use an existing lock, so we
just need to hook in there.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240219153639.179814-2-andre.przywara@arm.com
There is no reason to use RESERVEDMEM_OF_DECLARE() as the initialization
hook just saves off the base address and size. Use of
RESERVEDMEM_OF_DECLARE() is reserved for non-driver code and
initialization which must be done early. For qbman, retrieving the
address and size can be done in probe just as easily.
Link: https://lore.kernel.org/r/20240201192931.1324130-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
This fixes a "defined but not used"-warning in SPM driver when kernel is
built without regulator support, and corrects a couple of kernel-doc
issues in aoss and geni-se drivers.
-----BEGIN PGP SIGNATURE-----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=3ZwG
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=+egw
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
A few Qualcomm driver fixes for v6.9
This fixes a "defined but not used"-warning in SPM driver when kernel is
built without regulator support, and corrects a couple of kernel-doc
issues in aoss and geni-se drivers.
* tag 'qcom-drivers-for-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: aoss: add missing kerneldoc for qmp members
soc: qcom: geni-se: drop unused kerneldoc struct geni_wrapper param
soc: qcom: spm: fix building with CONFIG_REGULATOR=n
Link: https://lore.kernel.org/r/20240306032120.5036-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Extend Exynos PMU (Power Management Unit) driver being also the
syscon to main system controller registers block, to support Google
GS101. The Google GS101 has PMU registers protected and writing is
available only via SMC. The Exynos PMU will register its own custom
regmap for such case of mixed MMIO+SMC.
2. Rework Samsung watchdog driver to get the regmap to PMU block not
via syscon API, but from the Exynos PMU driver. This is necessary
for the watchdog driver to work on Google GS101.
-----BEGIN PGP SIGNATURE-----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=FkS9
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=mJ3H
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC driver changes for v6.9, part two
1. Extend Exynos PMU (Power Management Unit) driver being also the
syscon to main system controller registers block, to support Google
GS101. The Google GS101 has PMU registers protected and writing is
available only via SMC. The Exynos PMU will register its own custom
regmap for such case of mixed MMIO+SMC.
2. Rework Samsung watchdog driver to get the regmap to PMU block not
via syscon API, but from the Exynos PMU driver. This is necessary
for the watchdog driver to work on Google GS101.
* tag 'samsung-drivers-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
MAINTAINERS: samsung: gs101: match patches touching Google Tensor SoC
Link: https://lore.kernel.org/r/20240227080755.34170-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This introduces the Qualcomm Programmable Boot Sequencer (PBS) driver.
The Qualcomm SMEM no longer acquires the hwspinlock during the "get"
operation, to improve the system behavior during the recovery of a
remoteproc that crashed with the hwspinlock held.
The Qualcomm Always On Subsystem (AOSS) message protocol driver gains
tracepoints, printf annotation, and a debugfs interface is introduced
for tweaking system properties during development and debugging.
The Qualcomm socinfo driver gains data for SM8475, QCM8550 and
QCS8550 platforms, and the PM2250 is renamed to PM4125.
Support for controlling the voltage regulator in SPM/SAW2 is introduced.
The gfx.lvl power-domain is dropped for SA8540P, as this resource was
incorrectly inherited from SC8280XP.
Additionally some code cleanup improvements is introduced across APR,
LLCC, SMP2P and SPM.
-----BEGIN PGP SIGNATURE-----
iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmXarn0VHGFuZGVyc3Nv
bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FzZoP/2hYUMS+sR2kD7gZDGi8oV71C+dQ
Vmo1MQIhGjYEb6HSHdrxp/11GPlLVU45xuk9/FFVqAPrxNQm2y9NC60Ye1TQNWZR
XS+w5+YkIFdfZIbZ8GGmlPspeXDSnq2DGWQjht+cBNyASzhjO5ICP79WQ0jfHgjH
l5pNw3YMamc7pwdX2oslxXV8HzDr4JxzpveV0+QbsVDU4J04mrxoBRmv2cdqv2Eb
5jNR4HjmCQkdI/bp/2frCmWmGP9bqP24C6XWCe4lXuCAsmNKAeEeuyABnsPNRYrO
5ELd2sPpXBLBUhR9w/0rY9ouIsJ500BD7U1yLrHocwGICL1Ro7dGjnyp6j/7Tm9X
1nx2mHK7ywH7E6BxVTcmDS3CtymcMknpUfUjANJ/yQrAmcqvKRA3F0ELiXywrndQ
0R97qjc9ixVaM5LU4kMgQG50NZCmsNPJ7a3smOihpmfJK+6Mmkc5XxFRYuJgL9Ag
b1PwnVgzeBPQAs+Tx7i5bBfFOa49zVxHYIFfu+XY50DL80viiKCRAeXQNyWmJ0qM
3tKgMeIY2nXZJ0DvySFfro51AnZcXEMa3Bc5qNZlM4jaqXGPkDocAV9CYKntlXFU
POnOnGo4liZalWqel3tTuDoBu3nVAq0q4+ooWl755TRGBtIvW1tWAOgldjg6v3Ef
6BgAWh8GrEHM0etB
=T09a
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=bPSM
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.9
This introduces the Qualcomm Programmable Boot Sequencer (PBS) driver.
The Qualcomm SMEM no longer acquires the hwspinlock during the "get"
operation, to improve the system behavior during the recovery of a
remoteproc that crashed with the hwspinlock held.
The Qualcomm Always On Subsystem (AOSS) message protocol driver gains
tracepoints, printf annotation, and a debugfs interface is introduced
for tweaking system properties during development and debugging.
The Qualcomm socinfo driver gains data for SM8475, QCM8550 and
QCS8550 platforms, and the PM2250 is renamed to PM4125.
Support for controlling the voltage regulator in SPM/SAW2 is introduced.
The gfx.lvl power-domain is dropped for SA8540P, as this resource was
incorrectly inherited from SC8280XP.
Additionally some code cleanup improvements is introduced across APR,
LLCC, SMP2P and SPM.
* tag 'qcom-drivers-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits)
dt-bindings: soc: qcom: qcom,saw2: add msm8226 l2 compatible
soc: qcom: spm: add support for voltage regulator
soc: qcom: spm: remove driver-internal structures from the driver API
dt-bindings: soc: qcom: qcom,saw2: define optional regulator node
dt-bindings: soc: qcom: qcom,saw2: add missing compatible strings
dt-bindings: soc: qcom: merge qcom,saw2.txt into qcom,spm.yaml
soc: qcom: llcc: Check return value on Broadcast_OR reg read
soc: qcom: socinfo: Add Soc IDs for SM8475 family
dt-bindings: arm: qcom,ids: Add IDs for SM8475 family
soc: qcom: apr: make aprbus const
dt-bindings: soc: qcom: qcom,pmic-glink: document X1E80100 compatible
soc: qcom: add QCOM PBS driver
dt-bindings: soc: qcom: Add qcom,pbs bindings
pmdomain: qcom: rpmhpd: Drop SA8540P gfx.lvl
soc: qcom: socinfo: rename PM2250 to PM4125
soc: qcom: aoss: Add tracepoints in qmp_send()
soc: qcom: socinfo: add SoC Info support for QCM8550 and QCS8550 platform
dt-bindings: arm: qcom,ids: add SoC ID for QCM8550 and QCS8550
soc: qcom: aoss: Add debugfs interface for sending messages
soc: qcom: smem: remove hwspinlock from item get routine
...
Link: https://lore.kernel.org/r/20240225030612.480241-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This set of changes adds ACPI support for the APBMISC driver and cleans
up a few things like dependencies and unused code.
-----BEGIN PGP SIGNATURE-----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=8s0Z
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=j1US
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.9-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: Changes for v6.9-rc1
This set of changes adds ACPI support for the APBMISC driver and cleans
up a few things like dependencies and unused code.
* tag 'tegra-for-6.9-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Add SD wake event for Tegra234
soc/tegra: pmc: Update scratch as an optional aperture
soc/tegra: pmc: Update address mapping sequence for PMC apertures
bus: tegra-aconnect: Update dependency to ARCH_TEGRA
soc/tegra: Fix build failure on Tegra241
soc/tegra: fuse: Fix crash in tegra_fuse_readl()
soc/tegra: fuse: Define tegra194_soc_attr_group for Tegra241
soc/tegra: fuse: Add support for Tegra241
soc/tegra: fuse: Add ACPI support for Tegra194 and Tegra234
soc/tegra: fuse: Add function to print SKU info
soc/tegra: fuse: Add function to add lookups
soc/tegra: fuse: Add tegra_acpi_init_apbmisc()
soc/tegra: fuse: Refactor resource mapping
soc/tegra: fuse: Use dev_err_probe for probe failures
mm/util: Introduce kmemdup_array()
soc/tegra: pmc: Remove some old and deprecated functions and constants
Link: https://lore.kernel.org/r/20240223174849.1509465-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add missing kerneldoc to silence:
qcom_aoss.c:93: warning: Function parameter or struct member 'debugfs_root' not described in 'qmp'
qcom_aoss.c:93: warning: Function parameter or struct member 'debugfs_files' not described in 'qmp'
Fixes: d51d984c55 ("soc: qcom: aoss: Add debugfs interface for sending messages")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240225202545.59113-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The newly added code causes a build failure when -Werror is set:
drivers/soc/qcom/spm.c:388:12: error: 'spm_get_cpu' defined but not used [-Werror=unused-function]
Remove the #ifdef and instead use an IS_ENABLED() check that lets the
compiler perform dead code elimination instead of the preprocessor.
Fixes: 6496dba142 ("soc: qcom: spm: add support for voltage regulator")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240221154457.2007420-1-arnd@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
a use-after-free fix and a boot fix for a pmic_glink qcom driver in
drivers/soc, a fix for the simpledrm/tegra transition, a kunit fix for
the TTM tests, a font handling fix for fbcon, two allocation fixes and a
kunit test to cover them for drm/buddy
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZeCIDAAKCRDj7w1vZxhR
xSYQAP9KTXlKqw9p/jFw/MFqBxzvwmi4/M5iUReoajPo1uCeCAD/ZY71qqBKCnrx
LiLHbQgvzWowxyq2A6fS28Ml7Vb5nQo=
=FZcr
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2024-02-29' of https://anongit.freedesktop.org/git/drm/drm-misc into drm-fixes
A reset fix for host1x, a resource leak fix and a probe fix for aux-hpd,
a use-after-free fix and a boot fix for a pmic_glink qcom driver in
drivers/soc, a fix for the simpledrm/tegra transition, a kunit fix for
the TTM tests, a font handling fix for fbcon, two allocation fixes and a
kunit test to cover them for drm/buddy
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229-angelic-adorable-teal-fbfabb@houat
Some Exynos based SoCs like Tensor gs101 protect the PMU registers for
security hardening reasons so that they are only write accessible in el3
via an SMC call.
As most Exynos drivers that need to write PMU registers currently obtain a
regmap via syscon (phys, pinctrl, watchdog). Support for the above usecase
is implemented in this driver using a custom regmap similar to syscon to
handle the SMC call. Platforms that don't secure PMU registers, get a mmio
regmap like before. As regmaps abstract out the underlying register access
changes to the leaf drivers are minimal.
A new API exynos_get_pmu_regmap_by_phandle() is provided for leaf drivers
that currently use syscon_regmap_lookup_by_phandle(). This also handles
deferred probing.
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240220220613.797068-2-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
We need to bail out before adding/removing devices if we are going to
-EPROBE_DEFER. Otherwise boot can get stuck in a probe deferral loop due
to a long-standing issue in driver core (see commit fbc35b45f9 ("Add
documentation on meaning of -EPROBE_DEFER")).
Deregistering the altmode child device can potentially also trigger bugs
in the DRM bridge implementation, which does not expect bridges to go
away.
[DB: slightly fixed commit message by adding the word 'commit']
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20231213210644.8702-1-robdclark@gmail.com
[ johan: rebase on 6.8-rc4, amend commit message and mention DRM ]
Fixes: 58ef4ece1e ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Cc: <stable@vger.kernel.org> # 6.3
Cc: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240217150228.5788-5-johan+linaro@kernel.org
A recent DRM series purporting to simplify support for "transparent
bridges" and handling of probe deferrals ironically exposed a
use-after-free issue on pmic_glink_altmode probe deferral.
This has manifested itself as the display subsystem occasionally failing
to initialise and NULL-pointer dereferences during boot of machines like
the Lenovo ThinkPad X13s.
Specifically, the dp-hpd bridge is currently registered before all
resources have been acquired which means that it can also be
deregistered on probe deferrals.
In the meantime there is a race window where the new aux bridge driver
(or PHY driver previously) may have looked up the dp-hpd bridge and
stored a (non-reference-counted) pointer to the bridge which is about to
be deallocated.
When the display controller is later initialised, this triggers a
use-after-free when attaching the bridges:
dp -> aux -> dp-hpd (freed)
which may, for example, result in the freed bridge failing to attach:
[drm:drm_bridge_attach [drm]] *ERROR* failed to attach bridge /soc@0/phy@88eb000 to encoder TMDS-31: -16
or a NULL-pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
...
Call trace:
drm_bridge_attach+0x70/0x1a8 [drm]
drm_aux_bridge_attach+0x24/0x38 [aux_bridge]
drm_bridge_attach+0x80/0x1a8 [drm]
dp_bridge_init+0xa8/0x15c [msm]
msm_dp_modeset_init+0x28/0xc4 [msm]
The DRM bridge implementation is clearly fragile and implicitly built on
the assumption that bridges may never go away. In this case, the fix is
to move the bridge registration in the pmic_glink_altmode driver to
after all resources have been looked up.
Incidentally, with the new dp-hpd bridge implementation, which registers
child devices, this is also a requirement due to a long-standing issue
in driver core that can otherwise lead to a probe deferral loop (see
commit fbc35b45f9 ("Add documentation on meaning of -EPROBE_DEFER")).
[DB: slightly fixed commit message by adding the word 'commit']
Fixes: 080b4e2485 ("soc: qcom: pmic_glink: Introduce altmode support")
Fixes: 2bcca96abf ("soc: qcom: pmic-glink: switch to DRM_AUX_HPD_BRIDGE")
Cc: <stable@vger.kernel.org> # 6.3
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240217150228.5788-4-johan+linaro@kernel.org
A fix for a kconfig symbol whose help text has been unhelpful since its
introduction.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZdYoDAAKCRB4tDGHoIJi
0sUcAPwLS5QvKXEleGgXZDN+c1s69PB6cozGLzBhaAuq2ro1EQEAqSLINUafm7dV
vViH9CYjVivLTYzdwNLfVBvlTO+ZuQk=
=Z6rj
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Xybl
-----END PGP SIGNATURE-----
Merge tag 'riscv-soc-drivers-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V SoC driver fixes for v6.8-rc6
A fix for a kconfig symbol whose help text has been unhelpful since its
introduction.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-drivers-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
soc: microchip: Fix POLARFIRE_SOC_SYS_CTRL input prompt
Link: https://lore.kernel.org/r/20240221-irate-outrage-cf7f96f83074@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The SPM / SAW2 device also provides a voltage regulator functionality
with optional AVS (Adaptive Voltage Scaling) support. The exact register
sequence and voltage ranges differs from device to device.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-5-0472ec237f49@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Move internal SPM driver structures to the driver itself, removing them
from the public API. The CPUidle driver doesn't use them at all.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-4-0472ec237f49@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add SD wake event for Tegra234 so that system can be woken up from
suspend when SD card hot-plug/unplug event is detected.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Petlozu Pravareshwar <petlozup@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Scratch address space register is used to store reboot reason. For
some Tegra234 systems, the scratch space is not available to store
the reboot reason. This is because scratch region on these systems
is not accessible by the kernel as restricted by the Hypervisor.
Such systems would delist scratch aperture from PMC DT node.
Hence this change makes scratch as optional aperture and also avoids
registering reboot notifier if scratch address space isn't mapped.
Signed-off-by: Petlozu Pravareshwar <petlozup@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
On Tegra SoCs prior to Tegra186, PMC has single address range only.
Starting from and after Tegra186, PMC has additional address ranges
apart from base address range. Currently in PMC driver, we try to
map these additional address ranges on all SoCs and if we fail then
we assume that the range is not valid for an SoC. This change makes
it more explicit on which address ranges are expected to be present
on which SoCs and maps the additional address ranges only on SoCs
from and after Tegra186.
Signed-off-by: Petlozu Pravareshwar <petlozup@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit c72ca343f9 ("soc: qcom: llcc: Add v4.1 HW version support")
introduced a new 4.1 if statement in llcc_update_act_ctrl() without
considering that ret might be overwritten. So, add return value check
after Broadcast_OR register read in llcc_update_act_ctrl().
Fixes: c72ca343f9 ("soc: qcom: llcc: Add v4.1 HW version support")
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20240212183515.433873-1-quic_uchalich@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Since commit d492cc2573 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the aprbus variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240213-bus_cleanup-apr-v1-1-50c824eec06d@marliere.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
If all the other SoCs are disabled, the driver fails to build:
drivers/soc/tegra/fuse/fuse-tegra30.c:684:17: error: 'tegra30_fuse_read' undeclared here (not in a function); did you mean 'tegra_fuse_readl'?
684 | .read = tegra30_fuse_read,
| ^~~~~~~~~~~~~~~~~
| tegra_fuse_readl
drivers/soc/tegra/fuse/fuse-tegra30.c:694:17: error: 'tegra30_fuse_init' undeclared here (not in a function); did you mean 'tegra_fuse_info'?
694 | .init = tegra30_fuse_init,
| ^~~~~~~~~~~~~~~~~
Fix the list of SoCs using this function to include the newly added one.
Fixes: dee509eb9cd5 ("soc/tegra: fuse: Add support for Tegra241")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Kartik <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra241 SoC data uses tegra194_soc_attr_group, which is only defined
if config CONFIG_ARCH_TEGRA_194_SOC or CONFIG_ARCH_TEGRA_234_SOC or
both are enabled. This causes a build failure if both of these configs
are disabled and CONFIG_ARCH_TEGRA_241_SOC is enabled.
Define tegra194_soc_attr_group if CONFIG_ARCH_TEGRA_241_SOC is enabled.
Signed-off-by: Kartik <kkartik@nvidia.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Thierry Reding <treding@nvidia.com>
