mirror of
https://github.com/torvalds/linux.git
synced 2024-12-24 20:01:55 +00:00
15cec633fc
30645 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
3f01e9fed8 |
linux-watchdog 6.5-rc2 tag
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iEYEABECAAYFAmSr8RUACgkQ+iyteGJfRsremwCffkZtmWL4wAXFcryut+/db7ZK Sc8An0+My3hJvfshnn2iN6yYoKEAJNiC =xW/G -----END PGP SIGNATURE----- Merge tag 'linux-watchdog-6.5-rc2' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog update from Wim Van Sebroeck: - Add Loongson-1 watchdog dt-bindings * tag 'linux-watchdog-6.5-rc2' of git://www.linux-watchdog.org/linux-watchdog: dt-bindings: watchdog: Add Loongson-1 watchdog |
||
|
Linus Torvalds
|
7fcd473a64 |
SCSI misc on 20230708
A few late arriving patches that missed the initial pull request. It's mostly bug fixes (the dt-bindings is a fix for the initial pull). Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZKmvwSYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishResAQCPDbBh omMRBE+W+Vx2TgOJGjo/F+T1D2JjBhLIGpNVggEApJtgrQutAToiCU/qIP9GOTl7 evetzh5boMMuyD2s7ak= =pi4v -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull more SCSI updates from James Bottomley: "A few late arriving patches that missed the initial pull request. It's mostly bug fixes (the dt-bindings is a fix for the initial pull)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Remove unused function declaration scsi: target: docs: Remove tcm_mod_builder.py scsi: target: iblock: Quiet bool conversion warning with pr_preempt use scsi: dt-bindings: ufs: qcom: Fix ICE phandle scsi: core: Simplify scsi_cdl_check_cmd() scsi: isci: Fix comment typo scsi: smartpqi: Replace one-element arrays with flexible-array members scsi: target: tcmu: Replace strlcpy() with strscpy() scsi: ncr53c8xx: Replace strlcpy() with strscpy() scsi: lpfc: Fix lpfc_name struct packing |
||
|
Linus Torvalds
|
4f6b6c2b2f |
RISC-V Patches for the 6.5 Merge Window, Part 2
* A bunch of fixes/cleanups from the first part of the merge window, mostly related to ACPI and vector as those were large. * Some documentation improvements, mostly related to the new code. * The "riscv,isa" DT key is deprecated. * Support for link-time dead code elimination. * Support for minor fault registration in userfaultd. * A handful of cleanups around CMO alternatives. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmSoLx8THHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiSlbD/9SVAxWKL/9oGh/qDtf7As24ngAKmsy YfC1LgDwvFOjVz8+YUD7HgUG1Sath2D5e5h2QpVBa16WezIzJUbDvvnYElB28i0J cZ1sCuI/S62kQbqrP3ITqSt0yj3A1OFVyuF3x+5m6pNqjjhkx5HxYs+omFGJYf4e K9JE1Rzi1QXNf+uZeuHhK6FqQYdNIsCXmMRnjZTF5FwwzYk1zVkUR4jntZMJV0sf aP1DfXXgPUEG0LzqTdMLSyT2qnQ2hux5/9ayknt45G0Bm4IYZfGd4Twtab8LOPY9 6nJq9UHFne8xFAeUp+GGY3vQLR7Y892vXHDprblhiAP2FzH3E1HOC1g24xd1lID5 80rgTB8ttY8LgOamr2HxeRKLQkWxDeng9IcAwSwe4T0QVIvqA1hjFTezXYWrD30e GA0gqvz11ERb7KKS4aJhEljS+ux81PXKPdKIeqp6KnM2N3Ch+LBRIY2v7JZQ0rcT eAb7uU2MRLwNDevoWkB7iFTkfd+frJGotRDFQZE9atXrx3j3UUNlnFGz8aKtSLX7 b0PFP2iqxYgVPVejqxw03VlEzgV19kJrT/o8Hh7mCGjFQPSbZKIBQb7yHYXKlWWT eTM8d+ETOlV+yRpWnJSnOX18scsriUmfQj9GhcImwCFsfh9XPLw8CHj82xZiUxFf 645zqiuRJi6yJw== =jBYf -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.5-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - A bunch of fixes/cleanups from the first part of the merge window, mostly related to ACPI and vector as those were large - Some documentation improvements, mostly related to the new code - The "riscv,isa" DT key is deprecated - Support for link-time dead code elimination - Support for minor fault registration in userfaultd - A handful of cleanups around CMO alternatives * tag 'riscv-for-linus-6.5-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (23 commits) riscv: mm: mark noncoherent_supported as __ro_after_init riscv: mm: mark CBO relate initialization funcs as __init riscv: errata: thead: only set cbom size & noncoherent during boot riscv: Select HAVE_ARCH_USERFAULTFD_MINOR RISC-V: Document the ISA string parsing rules for ACPI risc-v: Fix order of IPI enablement vs RCU startup mm: riscv: fix an unsafe pte read in huge_pte_alloc() dt-bindings: riscv: deprecate riscv,isa RISC-V: drop error print from riscv_hartid_to_cpuid() riscv: Discard vector state on syscalls riscv: move memblock_allow_resize() after linear mapping is ready riscv: Enable ARCH_SUSPEND_POSSIBLE for s2idle riscv: vdso: include vdso/vsyscall.h for vdso_data selftests: Test RISC-V Vector's first-use handler riscv: vector: clear V-reg in the first-use trap riscv: vector: only enable interrupts in the first-use trap RISC-V: Fix up some vector state related build failures RISC-V: Document that V registers are clobbered on syscalls riscv: disable HAVE_LD_DEAD_CODE_DATA_ELIMINATION for LLD riscv: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION ... |
||
|
Linus Torvalds
|
0b90730502 |
dmaengine updates for v6.5
New support:
- TI J721S2 CSI BCDMA support
Updates:
- Native HDMI support for dw edma driver
- ste dma40 updates for supporting proper SRAM handle in DT
- removal of dma device chancnt setting in drivers
-----BEGIN PGP SIGNATURE-----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=pGmA
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- TI J721S2 CSI BCDMA support
Updates:
- Native HDMI support for dw edma driver
- ste dma40 updates for supporting proper SRAM handle in DT
- removal of dma device chancnt setting in drivers"
* tag 'dmaengine-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (28 commits)
dmaengine: sprd: Don't set chancnt
dmaengine: hidma: Don't set chancnt
dmaengine: plx_dma: Don't set chancnt
dmaengine: axi-dmac: Don't set chancnt
dmaengine: dw-axi-dmac: Don't set chancnt
dmaengine: qcom: bam_dma: allow omitting num-{channels,ees}
dmaengine: dw-edma: Add HDMA DebugFS support
dmaengine: dw-edma: Add support for native HDMA
dmaengine: dw-edma: Create a new dw_edma_core_ops structure to abstract controller operation
dmaengine: dw-edma: Rename dw_edma_core_ops structure to dw_edma_plat_ops
dmaengine: ste_dma40: use proper format string for resource_size_t
dmaengine: make QCOM_HIDMA depend on HAS_IOMEM
dmaengine: ste_dma40: fix typo in enum documentation
dmaengine: ste_dma40: use correct print specfier for resource_size_t
MAINTAINERS: Add myself as the DW eDMA driver reviewer
MAINTAINERS: Add Manivannan to DW eDMA driver maintainers list
MAINTAINERS: Demote Gustavo Pimentel to DW EDMA driver reviewer
dmaengine: ti: k3-udma: Add support for J721S2 CSI BCDMA instance
dt-bindings: dma: ti: Add J721S2 BCDMA
dmaengine: ti: k3-psil-j721s2: Add PSI-L thread map for main CPSW2G
...
|
||
|
Linus Torvalds
|
c91e587be8 |
linux-watchdog 6.5-rc1 tag
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iEYEABECAAYFAmSlXqAACgkQ+iyteGJfRsp5AQCfdgPxG/Jp1HQv0X5XCwIDEtc5 eCoAoLl3U1RvBPZnOCQxJC0Vt7eSnaL1 =iIFi -----END PGP SIGNATURE----- Merge tag 'linux-watchdog-6.5-rc1' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add Xilinx Versal watchdog - support Hygon FCH/SCH (Server Controller Hub) - convert GPL notices to SPDX identifiers - other improvements * tag 'linux-watchdog-6.5-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: sp5100_tco: support Hygon FCH/SCH (Server Controller Hub) dt-bindings: watchdog: restrict node name suffixes MAINTAINERS: Add support for Xilinx versal watchdog watchdog: xilinx_wwdt: Add Versal window watchdog support dt-bindings: watchdog: xlnx,versal-wwdt: Add versal watchdog watchdog: ziirave_wdt: Switch i2c driver back to use .probe() watchdog: ibmasr: Replace GPL license notice with SPDX identifier watchdog: Convert GPL 2.0 notice to SPDX identifier watchdog: loongson1_wdt: Add DT support |
||
Keguang Zhang
|
2500df55a6 |
dt-bindings: watchdog: Add Loongson-1 watchdog
Add devicetree binding document for Loongson-1 watchdog. Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lkml.kernel.org/r/20230511121159.463645-2-keguang.zhang@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> |
||
|
Linus Torvalds
|
7afb9d76bc |
phy-for-6.5-v2
- New Support
- Debugfs support for phy core and mediatek driver
- Hisilicon inno-usb2-phy driver supporting Hi3798MV100
- Qualcomm SGMII SerDes PHY driver, SM6115 & QCM2290 QMP-USB support,
SA8775P USB PHY & USB3 UNI support, QUSB2 support for IPQ9574, IPQ9574 USB3 PHY
- Updates
- Sparx5 serdes phy power optimzation
- cadence salvo usb properties and updates and torrent DP with PCIe &
USB support
- Yaml conversion for Broadcom kona USB bindings and MXS USB binding
-----BEGIN PGP SIGNATURE-----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=ReXo
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.5_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New Support:
- Debugfs support for phy core and mediatek driver
- Hisilicon inno-usb2-phy driver supporting Hi3798MV100
- Qualcomm SGMII SerDes PHY driver, SM6115 & QCM2290 QMP-USB support,
SA8775P USB PHY & USB3 UNI support, QUSB2 support for IPQ9574,
IPQ9574 USB3 PHY
UpdatesL
- Sparx5 serdes phy power optimzation
- cadence salvo usb properties and updates and torrent DP with PCIe &
USB support
- Yaml conversion for Broadcom kona USB bindings and MXS USB binding"
* tag 'phy-for-6.5_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (67 commits)
dt-bindings: phy: brcm,brcmstb-usb-phy: Fix error in "compatible" conditional schema
dt-bindings: phy: mixel,mipi-dsi-phy: Remove assigned-clock* properties
dt-bindings: phy: intel,combo-phy: restrict node name suffixes
dt-bindings: phy: qcom,usb-hs-phy: Add compatible
phy: tegra: xusb: check return value of devm_kzalloc()
phy: qcom: qmp-combo: fix Display Port PHY configuration for SM8550
phy: qcom: add the SGMII SerDes PHY driver
dt-bindings: phy: describe the Qualcomm SGMII PHY
phy: qualcomm: fix indentation in Makefile
phy: usb: suppress OC condition for 7439b2
phy: usb: Turn off phy when port is in suspend
phy: tegra: xusb: Clear the driver reference in usb-phy dev
dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible
dt-bindings: phy: mxs-usb-phy: convert to DT schema format
dt-bindings: phy: qcom,qmp-usb: fix bindings error
dt-bindings: phy: qcom,qmp-ufs: fix the sc8180x regs
dt-bindings: phy: qcom,qmp-pcie: fix the sc8180x regs
phy: mediatek: tphy: add debugfs files
phy: core: add debugfs files
phy: fsl-imx8mp-usb: add support for phy tuning
...
|
||
|
Linus Torvalds
|
ace1ba1c90 |
pwm: Changes for v6.5-rc1
There's a little bit of everything in here: we've got various improvements and cleanups to drivers, some fixes across the board and a bit of new hardware support. -----BEGIN PGP SIGNATURE----- iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmSlRkwZHHRoaWVycnku cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zof9ZD/9PtA1GNgkM/FCJiIcIBXpx FVFf6y+gHx50g+O7JDbfcNxS3b5rcbJQOwhxtTNR+9orkYUWuOkiUqWf8bUZuXCt tjw7xW1LzDdLnxrarCD37T0aihYtKnKLxIQwdIEwS4nntaqJIdDdF62VDX+jdsbN YvXN1WrMbGFq77EgjbWlHv8Bsm/T1mWPi3CNsKi33LvS4flCC1Mq28YalGUmwpZo ZCJmUhPFwRbmaQ74yjUOa/UST18NwjQ/P6X25jiQ5Fjg8HZZH7RDJMduWQsT9520 U7I7UtHyZiJSGXonHTTvyhUK55wrrTVJHaXxufqvQQPTpEMG1rtlgGnBjvi/4fxt vPIjWi46QCFtKzRFIaazHBiIEmbS+ahs8uSERmoBhlgynHyqe6/cZBdKwRp0kjSY jLhSiE38ODENdbQmyEWuCQqv1yWQfRwwm1/Y5B4/GEX9TRNMFfUDPTEIYKEPxPM2 XI/FjMM+bP52t/rEPgCHL9E26tWv3SFPNYrafacLLfpol2iLdlAzp+ni3uz6Zj3H f3d6LyKjVAPc1R3ICdrEu+YHRA7K10wlOQwWwXsg57dJmLtKY7gbIKJjmGVYZX63 od8/UUPzpF+eNHbrHFR1bAlwNO1XvPqHhPaQrqTQAV6zf3+VEovljLEGQmKz7yQP ROWkedAsD7rwkFKzz9zulg== =gWkY -----END PGP SIGNATURE----- Merge tag 'pwm/for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "There's a little bit of everything in here: we've got various improvements and cleanups to drivers, some fixes across the board and a bit of new hardware support" * tag 'pwm/for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (22 commits) dt-bindings: pwm: convert pwm-bcm2835 bindings to YAML pwm: Add Renesas RZ/G2L MTU3a PWM driver pwm: mtk_disp: Fix the disable flow of disp_pwm dt-bindings: pwm: restrict node name suffixes pwm: pca9685: Switch i2c driver back to use .probe() pwm: ab8500: Fix error code in probe() MAINTAINERS: add pwm to PolarFire SoC entry pwm: add microchip soft ip corePWM driver pwm: sysfs: Do not apply state to already disabled PWMs pwm: imx-tpm: force 'real_period' to be zero in suspend pwm: meson: make full use of common clock framework pwm: meson: don't use hdmi/video clock as mux parent pwm: meson: switch to using struct clk_parent_data for mux parents pwm: meson: remove not needed check in meson_pwm_calc pwm: meson: fix handling of period/duty if greater than UINT_MAX pwm: meson: modify and simplify calculation in meson_pwm_get_state dt-bindings: pwm: Add R-Car V3U device tree bindings dt-bindings: pwm: imx: add i.MX8QXP compatible pwm: mediatek: Add support for MT7981 dt-bindings: pwm: mediatek: Add mediatek,mt7981 compatible ... |
||
|
Linus Torvalds
|
b986158164 |
Devicetree updates for v6.5, part 2:
- Whitespace clean-ups in binding examples - Restrict node name suffixes to "-[0-9]+" for cases of multiple instances which don't have unit-addresses - Convert brcm,kona-wdt and cdns,wdt-r1p2 watchdog bindings to DT schema -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmSlqhkACgkQ+vtdtY28 YcMIKQ/+J31iU4ILtNYDYIpwPHplcAKPnY/tNkAClCmIaL9+9MSTJssSu4eETVZ9 vOt11TCPJ0UVxQnDGqTNYWzGe9Z76RqxAeceV2gkLb8zWSRRG1PV2wnjJ1bdOzKd NU0bgL9ow8QtCjEQp+Bf+IjgyJr2dzTuke/5EzaO87khkjSvFW/EZoH31mTzaqSU EO8pmHJScwj+Hf0MJuYBWxUcedsRaG824MIHPeQDn9OfHecv/Sq3Diccd9JJGLWB RREXynLo5BAARzbZ0Jvkkpn/UUnmUMWJpAJClx5YbDCDRnPce5uEpslxuxuyVSzT EgRe+z4+smlNlPryQRY/F9SiYP1BymeiQDXAVto+xSkzKU820Kag2cw2DlowtKoR GhyNnKFfqfg0zwfAynhuKDfec+1a367EAad9Vta0c1oZVqarqjD/tu6C0VC4dLPb NE2spUEkWw1G1is3867Yb0RAhi50E/Oq3smYIbWuQP9UDeiZGJemFCQx9ZpdUTY4 lvu0DTQOrySXRkkeh1kjqHhYerbGn1fgwZTfsOJfWDwL3qgnm9DFx53vemsfnSjT l6xj5sB56LaxPEitkMzOp6mKFK5hXQMZ6HYD/YedmiZCFKl4KuPjdBqUVo6swlfQ PLRI0UpoMEFvJ44LL2oGGye9ZZgrCnkrEPJUg4clxLPqne8jJeg= =cRW/ -----END PGP SIGNATURE----- Merge tag 'devicetree-for-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull more devicetree updates from Rob Herring: - Whitespace clean-ups in binding examples - Restrict node name suffixes to "-[0-9]+" for cases of multiple instances which don't have unit-addresses - Convert brcm,kona-wdt and cdns,wdt-r1p2 watchdog bindings to DT schema * tag 'devicetree-for-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: soc: qcom: stats: Update maintainer email dt-bindings: cleanup DTS example whitespaces dt-bindings: timestamp: restrict node name suffixes dt-bindings: slimbus: restrict node name suffixes dt-bindings: watchdog: restrict node name suffixes dt-bindings: watchdog: brcm,kona-wdt: convert txt file to yaml dt-bindings: watchdog: cdns,wdt-r1p2: Convert cadence watchdog to yaml |
||
|
Linus Torvalds
|
fe1de55167 |
soundwire updates for 6.5
- Stream handling and slave alert handling - Qualcomm Soundwire v2.0.0 controller support - Intel ACE2.x initial support and code reorganization -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmSlHY4ACgkQfBQHDyUj g0fHJw//XRkP6BDfB3D/dnfJTPtWpcIBChdrImhNlL52czqUiyZXfBtkQkaGcDdy AFFcsvqYZkgQTXcyAoT/g5E/4M92RnrXHdxcQREsziBU1xnGNAtUDfK8EyPE+0I5 xBVUmtPGC9NS24UVDXKlOnq/6hPw0Ab4JVzFRMziqC8iIXTA4vj9xenjI2XX4K8d J5ajVBA7bGDeAN/mPJsCdCnT4i1si23/vUgk93pC/onCO3phZqh4TK4pY/qbwXzx tFwCh6qam0iY70Ga1T0HVc5wCMxXcmZFJuM8HnpTOYArubGpW7bOamxlItZtv4vL CEEqWgMWBE5r50fgaxe3zJ278nQSBQ8Gx5IP+OCPdt9FdqfEFFzVv+LWb+BVaKdJ N2IRT97t89PrMqU8zcm05HnR7lkgLvwle7eFcNLZaG3FleGp+P5nixCa4+tyvq+b a7/YtQIbkkXUFxKNMY8fVquk+to9H6xxeLrPmuufwwnO2DiYMuIPina0zU5/gEor qhzg5zTDK5lyO7P4AC/HWt50jl0IYDLIqBfdEVQ94G+QopPRVOGXQWfqipWC9f// WxDTi5IKCtL7QXJTbpUKBqu5N84LFqJpPNFA0GG9Wy9+hsUOwI+kFQpB5TQfCETD 7rwncBhrzJNhtZmLv54EMs5hISWl/CDEiyvItdho2r904/AcIWM= =gjRz -----END PGP SIGNATURE----- Merge tag 'soundwire-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: - Stream handling and slave alert handling - Qualcomm Soundwire v2.0.0 controller support - Intel ACE2.x initial support and code reorganization * tag 'soundwire-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (55 commits) soundwire: stream: Make master_list ordered to prevent deadlocks soundwire: bus: Prevent lockdep asserts when stream has multiple buses soundwire: qcom: fix storing port config out-of-bounds soundwire: intel_ace2x: fix SND_SOC_SOF_HDA_MLINK dependency soundwire: debugfs: Add missing SCP registers soundwire: stream: Remove unnecessary gotos soundwire: stream: Invert logic on runtime alloc flags soundwire: stream: Remove unneeded checks for NULL bus soundwire: bandwidth allocation: Remove pointless variable soundwire: cadence: revisit parity injection soundwire: intel/cadence: update hardware reset sequence soundwire: intel_bus_common: enable interrupts last soundwire: intel_bus_common: update error log soundwire: amd: Improve error message in remove callback soundwire: debugfs: fix unbalanced pm_runtime_put() soundwire: qcom: fix unbalanced pm_runtime_put() soundwire: qcom: set clk stop need reset flag at runtime soundwire: qcom: add software workaround for bus clash interrupt assertion soundwire: qcom: wait for fifo to be empty before suspend soundwire: qcom: drop unused struct qcom_swrm_ctrl members ... |
||
|
Linus Torvalds
|
15ac468614 |
media updates for v6.5-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmSlDSsACgkQCF8+vY7k 4RXm5Q/+IvIzEr2CBTmIvSXOdLjXiBvIB/tGCJ5617K7AWpASodm5BJLgJwJrLhi JZc12iXSJIwx+7YUVTYoBzf5AnQcXLmKx+MdPmks5AZeMxErPCnTIrUDZYCKogYg P0vt0HYmDgz0iMObrvnnZN5yXEUVqoWtob5sJSrgxin9cRGyWkE1B8PFNf+jHZXm /PWYSfQK4epbXKSYklJz5rTKdx+TIqSpv88EeFlB0QAZgRWbkkWUNutmtQm+nLRD vk70Uwgj8kUcY9A4A2YlWhojtt1T7YEhrfBUwtR+86wvNtcpTR0VHoQGydYiQD8u 5Ydut+5+94RzyIJI8IISSuFUyc0cOj4PO7UU9xULVoytsxgTN0ocC8+k9eAXw4Uc IMQM2OZsKFRIJ1Mrk8at0a5zij8zCMl1bveqvwdzSmAgN1mc9WgQEXOGFuWlAKMX D0nODJeyTvUQF7Z29LaYTKXjrP02aHN97dkS12jRIFQ3CQ7pIugIUxW2RC+Hqlk5 +R9UN933Ag0Gzd5giOQ1/iWCrFj1iI8j6VXF24bT9UGpJjAS0raevnUwoIQfloge SGqWM+s4/XZYyZh1nI1AaM/Y8C/W9ieF4WLX1sqA+407CgMSIVO0BA7QC/SOz3jn 5qp+C+NRudsig4+D8Kljr5CenPN9Jh2fwLbvpTFT4O2IWpx+OlA= =YwIy -----END PGP SIGNATURE----- Merge tag 'media/v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Lots of improvement at atomisp driver, which is starting to look in good shape - Mediatek vcodec driver has gained support for av1 and hevc stateless codecs - New sensor driver: ov01a10 - verisilicon driver has gained AV1 entropy helpers - tegra-video has gained support for Tegra20 parallel input - dvb core has gained an extra property to better support DVB-S2X - as usual, lots of cleanups, fixes and improvements on media drivers * tag 'media/v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (253 commits) media: wl128x: fix a clang warning media: dvb: mb86a20s: get rid of a clang-15 warning media: cec: i2c: ch7322: also select REGMAP media: add HAS_IOPORT dependencies media: tc358746: select CONFIG_GENERIC_PHY media: mediatek: vcodec: Add dbgfs help function media: mediatek: vcodec: Add encode to support dbgfs media: mediatek: vcodec: Change dbgfs interface to support encode media: mediatek: vcodec: Get each instance format type media: mediatek: vcodec: Get each context resolution information media: mediatek: vcodec: Add a debugfs file to get different useful information media: mediatek: vcodec: Add debug params to control different log level media: mediatek: vcodec: Add debugfs interface to get debug information media: mediatek: vcodec: support stateless AV1 decoder media: verisilicon: Conditionally ignore native formats media: verisilicon: Enable AV1 decoder on rk3588 media: verisilicon: Add film grain feature to AV1 driver media: verisilicon: Add Rockchip AV1 decoder media: verisilicon: Add AV1 entropy helpers media: verisilicon: Compute motion vectors size for AV1 frames ... |
||
Maulik Shah
|
31e9f406ef |
dt-bindings: soc: qcom: stats: Update maintainer email
Replace my email. Cc: devicetree@vger.kernel.org Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230703092026.4923-1-quic_mkshah@quicinc.com Signed-off-by: Rob Herring <robh@kernel.org> |
||
Krzysztof Kozlowski
|
ad5d960168 |
dt-bindings: cleanup DTS example whitespaces
The DTS code coding style expects spaces around '=' sign. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #display/msm Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20230702182308.7583-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> |
||
Conor Dooley
|
aeb71e42ca
|
dt-bindings: riscv: deprecate riscv,isa
intro ===== When the RISC-V dt-bindings were accepted upstream in Linux, the base ISA etc had yet to be ratified. By the ratification of the base ISA, incompatible changes had snuck into the specifications - for example the Zicsr and Zifencei extensions were spun out of the base ISA. Fast forward to today, and the reason for this patch. Currently the riscv,isa dt property permits only a specific subset of the ISA string - in particular it excludes version numbering. With the current constraints, it is not possible to discern whether "rv64i" means that the hart supports the fence.i instruction, for example. Future systems may choose to implement their own instruction fencing, perhaps using a vendor extension, or they may not implement the optional counter extensions. Software needs a way to determine this. versioning schemes ================== "Use the extension versions that are described in the ISA manual" you may say, and it's not like this has not been considered. Firstly, software that parses the riscv,isa property at runtime will need to contain a lookup table of some sort that maps arbitrary versions to versions it understands. There is not a consistent application of version number applied to extensions, with a higgledy-piggledy collection of tags, "bare" and versioned documents awaiting the reader on the "recently ratified extensions" page: https://wiki.riscv.org/display/HOME/Recently+Ratified+Extensions As an aside, and this is reflected in the patch too, since many extensions have yet to appear in a release of the ISA specs, they are defined by commits in their respective "working draft" repositories. Secondly, there is an issue of backwards compatibility, whereby allowing numbers in the ISA string, some parsers may be broken. This would require an additional property to be created to even use the versions in this manner. ~boolean properties~ string array property ========================================== If a new property is needed, the whole approach may as well be looked at from the bottom up. A string with limited character choices etc is hardly the best approach for communicating extension information to software. Switching to using properties that are defined on a per extension basis, allows us to define explicit meanings for the DT representation of each extension - rather than the current situation where different operating systems or other bits of software may impart different meanings to characters in the string. Clearly the best source of meanings is the specifications themselves, this just provides us the ability to choose at what point in time the meaning is set. If an extension changes incompatibility in the future, a new property will be required. Off-list, some of the RVI folks have committed to shoring up the wording in either the ISA specifications, the riscv-isa-manual or so that in the future, modifications to and additions or removals of features will require a new extension. Codifying that assertion somewhere would make it quite unlikely that compatibility would be broken, but we have the tools required to deal with it, if & when it crops up. It is in our collective interest, as consumers of extension meanings, to define a scheme that enforces compatibility. The use of individual elements, rather than a single string, will also permit validation that the properties have a meaning, as well as potentially reject mutually exclusive combinations, or enforce dependencies between extensions. That would not have be possible with the current dt-schema infrastructure for arbitrary strings, as we would need to add a riscv,isa parser to dt-validate! That's not implemented in this patch, but rather left as future work (for the brave, or the foolish). parser simplicity ================= Many systems that parse DT at runtime already implement an function that can check for the presence of a string in an array of string, as it is similar to the process for parsing a list of compatible strings, so a bunch of new, custom, DT parsing should not be needed. Getting rid of "riscv,isa" parsing would be a nice simplification, but unfortunately for backwards compatibility with old dtbs, existing parsers may not be removable - which may greatly simplify dt parsing code. In Linux, for example, checking for whether a hart supports an extension becomes as simple as: of_property_match_string(node, "riscv,isa-extensions", "zicbom") vendor extensions ================= Compared to riscv,isa, this proposed scheme promotes vendor extensions, oft touted as the strength of RISC-V, to first-class citizens. At present, extensions are defined as meaning what the RISC-V ISA specifications say they do. There is no realistic way of using that interface to provide cross-platform definitions for what vendor extensions mean. Vendor extensions may also have even less consistency than RVI do in terms of versioning, or no care about backwards compatibility. The new property allows us to assign explicit meanings on a per vendor extension basis, backed up by a description of their meanings. fin === Create a new file to store the extension meanings and a new riscv,isa-base property to replace the aspect of riscv,isa that is not represented by the new property - the base ISA implemented by a hart. As a starting point, add properties for extensions currently used in Linux. Finally, mark riscv,isa as deprecated, as removing support for it in existing programs would be an ABI break. CC: Palmer Dabbelt <palmer@dabbelt.com> CC: Paul Walmsley <paul.walmsley@sifive.com> CC: Rob Herring <robh+dt@kernel.org> CC: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> CC: Alistair Francis <alistair.francis@wdc.com> CC: Andrew Jones <ajones@ventanamicro.com> CC: Anup Patel <apatel@ventanamicro.com> CC: Atish Patra <atishp@atishpatra.org> CC: Jessica Clarke <jrtc27@jrtc27.com> CC: Rick Chen <rick@andestech.com> CC: Leo <ycliang@andestech.com> CC: Oleksii <oleksii.kurochko@gmail.com> CC: linux-riscv@lists.infradead.org CC: qemu-riscv@nongnu.org CC: u-boot@lists.denx.de CC: devicetree@vger.kernel.org CC: linux-kernel@vger.kernel.org Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230702-eats-scorebook-c951f170d29f@spud Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Linus Torvalds
|
ccf46d8531 |
More power management updates for 6.5-rc1
- Add missing __init annotation to one function in the intel_idle
drvier (Rafael Wysocki).
- Make intel_pstate use a correct scaling factor when mapping HWP
performance levels to frequency values on hybrid-capable systems
with disabled E-cores (Srinivas Pandruvada).
- Fix Kconfig dependencies of the cpufreq-dt-platform driver (Viresh
Kumar).
- Add support to build cpufreq-dt-platdev as a module (Zhipeng Wang).
- Don't allocate Sparc's cpufreq_driver dynamically (Viresh Kumar).
- Add support for TI's AM62A7 platform (Vibhore Vardhan).
- Add support for Armada's ap807 platform (Russell King (Oracle)).
- Add support for StarFive JH7110 SoC (Mason Huo).
- Fix voltage selection for Mediatek Socs (Daniel Golle).
- Fix error handling in Tegra's cpufreq driver (Christophe JAILLET).
- Document Qualcomm's IPQ8074 in DT bindings (Robert Marko).
- Don't warn for disabling a non-existing frequency for imx6q cpufreq
driver (Christoph Niedermaier).
- Use dev_err_probe() in Qualcomm's cpufreq driver (Andrew Halaney).
- Simplify performance state related logic in the OPP core (Viresh
Kumar).
- Fix use-after-free and improve locking around lazy_opp_tables (Viresh
Kumar, Stephan Gerhold).
- Minor cleanups - using dev_err_probe() and rate-limiting debug
messages (Andrew Halaney, Adrián Larumbe).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmSkTGwSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxbxAQAJ92EqcE2n2Eyts6KU7n3sKu8jEIiNPV
3bdFgTfjsc26Sm+ppiISRkk0CCNcyljCM4I5wRtEe4+hfTszAdrFd2SNYUHjHCZl
xIz9MVtZlh3ODm2d8ClFvQEL3So+oO6UG5V5IS27/34sfgQAS+77AWtjdh/j8d+0
ZM4jikbR87eACmpmgAjp17LIH2qdKx4Sri5VUZSNVde4es/m306gkhT5hZFDrRai
S+s/Mxfp4sxSNNiZC6nXp10bvU/cT7ZWsOcaaOltZmt/Y9yWiLFEmNKjR3ljvzOA
H6EPMcfhdBUiIhdMpjqMttVNOOgaU2ma/JKQF5JLDkFCnT/BGVi3HsvA8uT8tIgA
doSZ0+ODQ7ar/v55Rv9ENwshfb5oaPDV729EhQyCrNCc77yvjwA1sXoeDEuS2GXa
sYXHIsuAs/aNzUdIQZ2G5pjG0zs3xu6oMODfbYoPGg3tj9ITT6TqxnBkjBhsfTKl
bv0bqh/nMPVcLZaOEXvM538XiEfKmGz9wWH5d8WydyDkCGTG97m/bQaZOlEry7RY
R70vPOi8ArVRwJlmW5Gl8NENy2DsCMj+BXmxMU2EwhwL1KLvDWQ+Qf6MFU7o0iym
W/5RQGbbH/clVJL+zXSTsqmfMJanrIM4DY2wKaRz0o2xxiOh/cNRuzm0ZjfAmbml
MjEhdmcNX76P
=7lBb
-----END PGP SIGNATURE-----
Merge tag 'pm-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These add support for new hardware (ap807 and AM62A7), fix several
issues in cpufreq drivers and in the operating performance points
(OPP) framework, fix up intel_idle after recent changes and add
documentation.
Specifics:
- Add missing __init annotation to one function in the intel_idle
drvier (Rafael Wysocki)
- Make intel_pstate use a correct scaling factor when mapping HWP
performance levels to frequency values on hybrid-capable systems
with disabled E-cores (Srinivas Pandruvada)
- Fix Kconfig dependencies of the cpufreq-dt-platform driver (Viresh
Kumar)
- Add support to build cpufreq-dt-platdev as a module (Zhipeng Wang)
- Don't allocate Sparc's cpufreq_driver dynamically (Viresh Kumar)
- Add support for TI's AM62A7 platform (Vibhore Vardhan)
- Add support for Armada's ap807 platform (Russell King (Oracle))
- Add support for StarFive JH7110 SoC (Mason Huo)
- Fix voltage selection for Mediatek Socs (Daniel Golle)
- Fix error handling in Tegra's cpufreq driver (Christophe JAILLET)
- Document Qualcomm's IPQ8074 in DT bindings (Robert Marko)
- Don't warn for disabling a non-existing frequency for imx6q cpufreq
driver (Christoph Niedermaier)
- Use dev_err_probe() in Qualcomm's cpufreq driver (Andrew Halaney)
- Simplify performance state related logic in the OPP core (Viresh
Kumar)
- Fix use-after-free and improve locking around lazy_opp_tables
(Viresh Kumar, Stephan Gerhold)
- Minor cleanups - using dev_err_probe() and rate-limiting debug
messages (Andrew Halaney, Adrián Larumbe)"
* tag 'pm-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
cpufreq: intel_pstate: Fix scaling for hybrid-capable systems with disabled E-cores
cpufreq: Make CONFIG_CPUFREQ_DT_PLATDEV depend on OF
intel_idle: Add __init annotation to matchup_vm_state_with_baremetal()
OPP: Properly propagate error along when failing to get icc_path
OPP: Use dev_err_probe() when failing to get icc_path
cpufreq: qcom-cpufreq-hw: Use dev_err_probe() when failing to get icc paths
cpufreq: mediatek: correct voltages for MT7622 and MT7623
cpufreq: armada-8k: add ap807 support
OPP: Simplify the over-designed pstate <-> level dance
OPP: pstate is only valid for genpd OPP tables
OPP: don't drop performance constraint on OPP table removal
OPP: Protect `lazy_opp_tables` list with `opp_table_lock`
OPP: Staticize `lazy_opp_tables` in of.c
cpufreq: dt-platdev: Support building as module
opp: Fix use-after-free in lazy_opp_tables after probe deferral
dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ8074
cpufreq: dt-platdev: Blacklist ti,am62a7 SoC
cpufreq: ti-cpufreq: Add support for AM62A7
OPP: rate-limit debug messages when no change in OPP is required
cpufreq: imx6q: don't warn for disabling a non-existing frequency
...
|
||
|
Linus Torvalds
|
b869e9f499 |
Another set of clk driver updates and fixes for the merge window. The
driver updates needed more time to bake in linux-next.
Updates:
- Support for more clk controllers in Qualcomm SoCs such as SM8350,
SM8450, SDX75, SC8280XP, and IPQ9574
- Runtime PM enablement of some more Qualcomm clk controllers
- Various fixes to Qualcomm clk driver data to use correct clk_ops
and to check halt bits properly
- AT91 updates to modernize with clk_parent_data structures
Fixes:
- Remove "syscon" from dt binding fix for ti,j721e-system-controller
- Fix determine rate in the Tegra driver that got wrecked by the
refactorting of muxes this merge window
-----BEGIN PGP SIGNATURE-----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=cF5c
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
"Another set of clk driver updates and fixes for the merge window. The
driver updates needed more time to bake in linux-next.
Updates:
- Support for more clk controllers in Qualcomm SoCs such as SM8350,
SM8450, SDX75, SC8280XP, and IPQ9574
- Runtime PM enablement of some more Qualcomm clk controllers
- Various fixes to Qualcomm clk driver data to use correct clk_ops
and to check halt bits properly
- AT91 updates to modernize with clk_parent_data structures
Fixes:
- Remove 'syscon' from dt binding fix for ti,j721e-system-controller
- Fix determine rate in the Tegra driver that got wrecked by the
refactorting of muxes this merge window"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (69 commits)
clk: tegra: Avoid calling an uninitialized function
dt-bindings: mfd: ti,j721e-system-controller: Remove syscon from example
clk: at91: sama7g5: s/ep_chg_chg_id/ep_chg_id
clk: at91: sama7g5: switch to parent_hw and parent_data
clk: at91: sckc: switch to parent_data/parent_hw
clk: at91: clk-sam9x60-pll: add support for parent_hw
clk: at91: clk-utmi: add support for parent_hw
clk: at91: clk-system: add support for parent_hw
clk: at91: clk-programmable: add support for parent_hw
clk: at91: clk-peripheral: add support for parent_hw
clk: at91: clk-master: add support for parent_hw
clk: at91: clk-generated: add support for parent_hw
clk: at91: clk-main: add support for parent_data/parent_hw
clk: qcom: gcc-sc8280xp: Add runtime PM
clk: qcom: gpucc-sc8280xp: Add runtime PM
clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
clk: qcom: gpucc-sm6375: Enable runtime pm
dt-bindings: clock: sm6375-gpucc: Add VDD_GX
clk: qcom: gcc-sm6115: Add missing PLL config properties
clk: qcom: clk-alpha-pll: Add a way to update some bits of test_ctl(_hi)
...
|
||
|
Linus Torvalds
|
0df241385b |
power supply and reset changes for the 6.5 series
* Add new Qualcomm PMI8998/PM660 SMB2 charger * bq256xx: support systems without thermistors * cros_pchg: fix peripheral device status after system resume * axp20x_usb_power: add support for AXP192 * qcom-pon: add support for pm8941 * at91-reset: prepare to expose reset reason to sysfs * switch all I2C drivers back to use .probe instead of .probe_new * convert some more DT bindings to YAML * misc. cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAmSjPRsACgkQ2O7X88g7 +ppEgw//SzE/6dgc5e2OG+qtHb2vnjUrmoz9w0/sGZuTVFhnvZ4ofpEyOrRR8/kV rUT6dqEPh3p/tHIyiLdcAG2JyA3QZ3G8rekdIUOj++vWn4S97FQsqBxwL/46D0om c7S+SDrCo/XKnJvRIiC8a+0HzAsjVUdaWdvzkEovrF5MRS1HeX4GXadaW/c6pdxN NfOZBR2F+JXHlC/nmBtpmQCJvikooz6DPvZd6Tiv9dlywOHNO7NSlcueuuhSofYp /j7BAXq/V+jEynNTPnaBwnO5aA1XPMpC/nOo4HuHjJbrHoXCt5bMhabA9bIlaplN 9bilfxmqqfaMkpWQOhF8qmz+s496WELcmGqGBZXvNBgn/85qYTPxue4JVe1D7ldh TjvGUBZkVUwkce052BZrPZCUTYhlrTBJ/6xpuGeUrPa3C9ib8e9Wm6C13zI2vsJV EeVxgt79cNkdioZ0GfibQTg+bJ7oa8BtwWEk0UaC9jfaPQGfNum05FHRik1a+A7R vehaoIYiCCMaXuHSZoqqjEocdnxXQCNkViMuYNqhN5Bcb0YdlMF6r0T2fa4HND0Y CU8uCofqTc67/RazqCsIRHNXDi6cJOYmdnSc1q7pYCO9/KmoMdP0xIFPB2Mca7uI 2rMooSE77ssYGc1gOW9GWuMNEdvJXNufJJzr5LLdMbhIh0ecy04= =9vtE -----END PGP SIGNATURE----- Merge tag 'for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - Add new Qualcomm PMI8998/PM660 SMB2 charger - bq256xx: support systems without thermistors - cros_pchg: fix peripheral device status after system resume - axp20x_usb_power: add support for AXP192 - qcom-pon: add support for pm8941 - at91-reset: prepare to expose reset reason to sysfs - switch all I2C drivers back to use .probe instead of .probe_new - convert some more DT bindings to YAML - misc cleanups * tag 'for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits) MAINTAINERS: add documentation file for Microchip SAMA5D2 shutdown controller dt-bindings: power: reset: atmel,sama5d2-shdwc: convert to yaml dt-bindings: power: reset: atmel,at91sam9260-shdwc: convert to yaml power: reset: at91-reset: change the power on reason prototype power: reset: qcom-pon: add support for pm8941-pon dt-bindings: power: reset: qcom-pon: define pm8941-pon power: supply: add Qualcomm PMI8998 SMB2 Charger driver dt-bindings: power: supply: qcom,pmi8998-charger: add bindings for smb2 driver power: supply: rt9467: Make charger-enable control as logic level power: supply: Switch i2c drivers back to use .probe() power: reset: add HAS_IOPORT dependencies dt-bindings: power: supply: axp20x: Add AXP192 compatible power: supply: axp20x_usb_power: Add support for AXP192 power: supply: axp20x_usb_power: Remove variant IDs from VBUS polling check power: supply: axp20x_usb_power: Use regmap field for VBUS disabling power: supply: axp20x_usb_power: Use regmap fields for USB BC feature power: supply: axp20x_usb_power: Use regmap fields for VBUS monitor feature power: supply: axp20x_usb_power: Simplify USB current limit handling power: supply: hwmon: constify pointers to hwmon_channel_info power: supply: twl4030_madc_battery: Refactor twl4030_madc_bat_ext_changed() ... |
||
|
Linus Torvalds
|
02676ecca7 |
remoteproc updates for v6.5
The bulk of these patches relates to the moving to a void-returning remove callback. The i.MX HiFi remoteproc driver gets its pm_ops helpers updated to resolve build warnings about "defined but not used" variables in certain configurations. The ST STM32 remoteproc driver is extended to allow using a SCMI reset controller to hold boot, and has an error message corrected. The Qualcomm Q6V5 PAS driver gains a missing "static" qualifier on adsp_segment_dump(). -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmSjLeMVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FrC0P/jRxXCckwudaZFEQW3LTr8QDI/zV +ZkVBV9VUfjV64mY0Z6dAihXcONVYCNhKXX+6h+I/nxUfAqAJY7wbQBDmB/C7EL0 qm185BBHNr8XmxezwmttKpeiCibcRoLbSCOeJXjXbOU3op/h7zTu6zLE2gLPWvWM s+x784cbiK5W/IY8DWoSHKW5XXMjgTta8pk8VhovnB/EokHjdbEHXQgpn/HVogvk ErczPWli8+bmzlAwd5RUNUW6q/Lnx3ffjC5dsVhlqK0iGNIu6fa0YUk35Uc7ig09 0D2iZBqZLff/2WTW+PMHfdNl6dfzcLBLgoDpnFwOX2QO17qjKHTQfAwDshJkhKw6 9BiJifXaVX2vrBCd7REUrAeHmzIbgO+yCnKFr1UyLmbj0x/DXQLCQHrkPXycKgKi Z9ujdJC7XsFyn1DSgxNSSWSpDhJOuMX77Umi/ASRWPha15H3YlOjqXV/Vaoy0iPg E7iCL2dd11X9s/LXp16ahcAgb7c6vEXclWm1CsTQzhMDLMmVBysMa/AWg8Gtq4hW pxCwsGWG7CTTAE2/E7N6AX/caNRs2Z++b6MLRVrIvvokgnk2Ofhqlyn71r7FstlV uBWUM9BszeIzG6NYAKWjRo036tVgTWnMWsy+i5uSOEUD6JsaMm7TnjVEOAtz1cQE VWbln8J7plG5ly6g =9t2a -----END PGP SIGNATURE----- Merge tag 'rproc-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: "The bulk of these patches relates to the moving to a void-returning remove callback. The i.MX HiFi remoteproc driver gets its pm_ops helpers updated to resolve build warnings about 'defined but not used' variables in certain configurations. The ST STM32 remoteproc driver is extended to allow using a SCMI reset controller to hold boot, and has an error message corrected. The Qualcomm Q6V5 PAS driver gains a missing 'static' qualifier on adsp_segment_dump()" * tag 'rproc-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (23 commits) remoteproc: qcom_q6v5_pas: staticize adsp_segment_dump() remoteproc: stm32: Fix error code in stm32_rproc_parse_dt() remoteproc: stm32: Allow hold boot management by the SCMI reset controller dt-bindings: remoteproc: st,stm32-rproc: Rework reset declarations remoteproc: imx_dsp_rproc: use modern pm_ops remoteproc: wkup_m3: Convert to platform remove callback returning void remoteproc: stm32: Convert to platform remove callback returning void remoteproc: st: Convert to platform remove callback returning void remoteproc: virtio: Convert to platform remove callback returning void remoteproc: rcar: Convert to platform remove callback returning void remoteproc: qcom_wcnss: Convert to platform remove callback returning void remoteproc: qcom_q6v5_wcss: Convert to platform remove callback returning void remoteproc: qcom_q6v5_pas: Convert to platform remove callback returning void remoteproc: qcom_q6v5_mss: Convert to platform remove callback returning void remoteproc: qcom_q6v5_adsp: Convert to platform remove callback returning void remoteproc: pru: Convert to platform remove callback returning void remoteproc: omap: Convert to platform remove callback returning void remoteproc: mtk_scp: Convert to platform remove callback returning void remoteproc: meson_mx_ao_arc: Convert to platform remove callback returning void remoteproc: keystone: Convert to platform remove callback returning void ... |
||
|
Linus Torvalds
|
56cbceab92 |
USB / Thunderbolt driver updates for 6.5-rc1
Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1.
Included in here are:
- Lots of USB4/Thunderbolt additions and updates for new hardware
types and fixes as people are starting to get access to the hardware
in the wild
- new gadget controller driver, cdns2, added
- new typec drivers added
- xhci driver updates
- typec driver updates
- usbip driver fixes
- usb-serial driver updates and fixes
- lots of smaller USB driver updates
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKcVw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynEIQCgzJgnMCB81mirXlY1ZpCSDFqN8KIAnjRc27/1
vnUzldMQGY/FiS549gD9
=G3yz
-----END PGP SIGNATURE-----
Merge tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1.
Included in here are:
- Lots of USB4/Thunderbolt additions and updates for new hardware
types and fixes as people are starting to get access to the
hardware in the wild
- new gadget controller driver, cdns2, added
- new typec drivers added
- xhci driver updates
- typec driver updates
- usbip driver fixes
- usb-serial driver updates and fixes
- lots of smaller USB driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits)
usb: host: xhci-plat: Set XHCI_STATE_REMOVING before resuming XHCI HC
usb: host: xhci: Do not re-initialize the XHCI HC if being removed
usb: typec: nb7vpq904m: fix CONFIG_DRM dependency
usbip: usbip_host: Replace strlcpy with strscpy
usb: dwc3: gadget: Propagate core init errors to UDC during pullup
USB: serial: option: add LARA-R6 01B PIDs
usb: ulpi: Make container_of() no-op in to_ulpi_dev()
usb: gadget: legacy: fix error return code in gfs_bind
usb: typec: fsa4480: add support for Audio Accessory Mode
usb: typec: fsa4480: rework mux & switch setup to handle more states
usb: typec: ucsi: call typec_set_mode on non-altmode partner change
USB: gadget: f_hid: make hidg_class a static const structure
USB: gadget: f_printer: make usb_gadget_class a static const structure
USB: mon: make mon_bin_class a static const structure
USB: gadget: udc: core: make udc_class a static const structure
USB: roles: make role_class a static const structure
dt-bindings: usb: dwc3: Add interrupt-names property support for wakeup interrupt
dt-bindings: usb: Add StarFive JH7110 USB controller
dt-bindings: usb: dwc3: Add IPQ9574 compatible
usb: cdns2: Fix spelling mistake in a trace message "Wakupe" -> "Wakeup"
...
|
||
|
Linus Torvalds
|
44aeec836d |
Char/Misc and other driver subsystem updates for 6.5-rc1
Here is the big set of char/misc and other driver subsystem updates for
6.5-rc1.
Lots of different, tiny, stuff in here, from a range of smaller driver
subsystems, including pulls from some substems directly:
- IIO driver updates and additions
- W1 driver updates and fixes (and a new maintainer!)
- FPGA driver updates and fixes
- Counter driver updates
- Extcon driver updates
- Interconnect driver updates
- Coresight driver updates
- mfd tree tag merge needed for other updates
on top of that, lots of small driver updates as patches, including:
- static const updates for class structures
- nvmem driver updates
- pcmcia driver fix
- lots of other small driver updates and fixes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKNMw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylhlQCfZrtz8RIbau8zbzh/CKpKBOmvHp4An3V64hbz
recBPLH0ZACKl0wPl4iZ
=A83A
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.5-rc1.
Lots of different, tiny, stuff in here, from a range of smaller driver
subsystems, including pulls from some substems directly:
- IIO driver updates and additions
- W1 driver updates and fixes (and a new maintainer!)
- FPGA driver updates and fixes
- Counter driver updates
- Extcon driver updates
- Interconnect driver updates
- Coresight driver updates
- mfd tree tag merge needed for other updates on top of that, lots of
small driver updates as patches, including:
- static const updates for class structures
- nvmem driver updates
- pcmcia driver fix
- lots of other small driver updates and fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (243 commits)
bsr: fix build problem with bsr_class static cleanup
comedi: make all 'class' structures const
char: xillybus: make xillybus_class a static const structure
xilinx_hwicap: make icap_class a static const structure
virtio_console: make port class a static const structure
ppdev: make ppdev_class a static const structure
char: misc: make misc_class a static const structure
/dev/mem: make mem_class a static const structure
char: lp: make lp_class a static const structure
dsp56k: make dsp56k_class a static const structure
bsr: make bsr_class a static const structure
oradax: make 'cl' a static const structure
hwtracing: hisi_ptt: Fix potential sleep in atomic context
hwtracing: hisi_ptt: Advertise PERF_PMU_CAP_NO_EXCLUDE for PTT PMU
hwtracing: hisi_ptt: Export available filters through sysfs
hwtracing: hisi_ptt: Add support for dynamically updating the filter list
hwtracing: hisi_ptt: Factor out filter allocation and release operation
samples: pfsm: add CC_CAN_LINK dependency
misc: fastrpc: check return value of devm_kasprintf()
coresight: dummy: Update type of mode parameter in dummy_{sink,source}_enable()
...
|
||
|
Linus Torvalds
|
0a8d6c9c71 |
- New Functionality
- Add lots of Device Tree bindings / support
- Turn off LED strings when display is blank
- Switch I2C drivers from .probe_new() to .probe()
- Remove superfluous NULL checks
- Only obtain PWM information once and do it in .probe()
- Fix-ups
- Ensure locks are obtained and held when required
-----BEGIN PGP SIGNATURE-----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=pKT7
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Functionality:
- Add lots of Device Tree bindings / support
- Turn off LED strings when display is blank
- Switch I2C drivers from .probe_new() to .probe()
- Remove superfluous NULL checks
- Only obtain PWM information once and do it in .probe()
Fix-ups:
- Ensure locks are obtained and held when required"
* tag 'backlight-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: led_bl: Take led_access lock when required
video: backlight: lp855x: Get PWM for PWM mode during probe
dt-bindings: backlight: lp855x: Convert to YAML and modernize
dt-bindings: backlight: pwm: Make power-supply not required
backlight: pwm_bl: Remove unneeded checks for valid GPIOs
backlight: Switch i2c drivers back to use .probe()
backlight: lm3630a: Turn off both led strings when display is blank
dt-bindings: leds: backlight: ktz8866: Add reg property and update example
|
||
|
Linus Torvalds
|
c156d4af43 |
- New Drivers
- Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs
- Add support for Awinic AW20036/AW20054/AW20072 LEDs
- New Device Support
- Add support for PMI632 LPG to QCom LPG
- Add support for PMI8998 to QCom Flash
- Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC
- New Functionality
- Implement the LP55xx Charge Pump
- Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC
- Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC
- Enable per-pin resolution Pinctrl in LEDs GPIO
- Fix-ups
- Allow thread to sleep by switching from spinlock to mutex
- Add lots of Device Tree bindings / support
- Adapt relationships / dependencies driven by Kconfig
- Switch I2C drivers from .probe_new() to .probe()
- Remove superfluous / duplicate code
- Replace strlcpy() with strscpy() for efficiency and overflow prevention
- Staticify various functions
- Trivial: Fixing coding style
- Simplify / reduce code
- Bug Fixes
- Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename
- Repair race between led_set_brightness(LED_{OFF,FULL})
- Fix Oops relating to sleeping in critical sections
- Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger
- Do not leak resources in error handling paths
- Fix unsigned comparison which can never be negative
- Provide missing NULL terminating entries in tables
- Fix misnaming issues
-----BEGIN PGP SIGNATURE-----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=9kd5
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Drivers:
- Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs
- Add support for Awinic AW20036/AW20054/AW20072 LEDs
New Device Support:
- Add support for PMI632 LPG to QCom LPG
- Add support for PMI8998 to QCom Flash
- Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC
New Functionality:
- Implement the LP55xx Charge Pump
- Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC
- Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC
- Enable per-pin resolution Pinctrl in LEDs GPIO
Fix-ups:
- Allow thread to sleep by switching from spinlock to mutex
- Add lots of Device Tree bindings / support
- Adapt relationships / dependencies driven by Kconfig
- Switch I2C drivers from .probe_new() to .probe()
- Remove superfluous / duplicate code
- Replace strlcpy() with strscpy() for efficiency and overflow prevention
- Staticify various functions
- Trivial: Fixing coding style
- Simplify / reduce code
Bug Fixes:
- Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename
- Repair race between led_set_brightness(LED_{OFF,FULL})
- Fix Oops relating to sleeping in critical sections
- Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger
- Do not leak resources in error handling paths
- Fix unsigned comparison which can never be negative
- Provide missing NULL terminating entries in tables
- Fix misnaming issues"
* tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (53 commits)
leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks
leds: sgm3140: Add richtek,rt5033-led compatible
dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks"
dt-bindings: leds: Drop unneeded quotes
leds: Fix config reference for AW200xx driver
leds: leds-mt6323: Add support for WLEDs and MT6332
leds: leds-mt6323: Add support for MT6331 leds
leds: leds-mt6323: Open code and drop MT6323_CAL_HW_DUTY macro
leds: leds-mt6323: Drop MT6323_ prefix from macros and defines
leds: leds-mt6323: Specify registers and specs in platform data
dt-bindings: leds: leds-mt6323: Document mt6332 compatible
dt-bindings: leds: leds-mt6323: Document mt6331 compatible
leds: simatic-ipc-leds-gpio: Introduce more Kconfig switches
leds: simatic-ipc-leds-gpio: Split up into multiple drivers
leds: simatic-ipc-leds-gpio: Move two extra gpio pins into another table
leds: simatic-ipc-leds-gpio: Add terminating entries to gpio tables
leds: flash: leds-qcom-flash: Fix an unsigned comparison which can never be negative
leds: cht-wcove: Remove unneeded semicolon
leds: cht-wcove: Fix an unsigned comparison which can never be negative
...
|
||
|
Linus Torvalds
|
b8ec70ab66 |
- New Drivers
- Add support for TI TPS6594/TPS6593/LP8764 PMICs
- Add support for Samsung RT5033 Battery Charger
- Add support for Analog Devices MAX77540 and MAX77541 PMICs
- New Device Support
- Add support for SPI to Rockchip RK808 (and friends)
- Add support for AXP192 PMIC to X-Powers AXP20X
- Add support for AXP313a PMIC to X-Powers AXP20X
- Add support for RK806 to Rockchip RK8XX
- Removed Device Support
- Removed MFD support for Richtek RT5033 Battery
- Fix-ups
- Remove superfluous code
- Switch I2C drivers from .probe_new() to .probe()
- Convert over to managed resources (devm_*(), etc)
- Use dev_err_probe() for returning errors from .probe()
- Add lots of Device Tree bindings / support
- Improve cache efficiency by switching to Maple
- Use own exported namespaces (NS)
- Include missing and remove superfluous headers
- Start using / convert to the new shutdown sys-off API
- Trivial: variable / define renaming
- Make use of of_property_read_reg() when requesting DT 'reg's
- Bug Fixes
- Fix chip revision readout due to incorrect data masking
- Amend incorrect register and mask values used for charger state
- Hide unused functionality at compile time
- Fix resource leaks following error handling routines
- Return correct error values and fix error handling in general
- Repair incorrect device names - used for device matching
- Remedy broken module auto-loading
-----BEGIN PGP SIGNATURE-----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=EmOj
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for TI TPS6594/TPS6593/LP8764 PMICs
- Add support for Samsung RT5033 Battery Charger
- Add support for Analog Devices MAX77540 and MAX77541 PMICs
New Device Support:
- Add support for SPI to Rockchip RK808 (and friends)
- Add support for AXP192 PMIC to X-Powers AXP20X
- Add support for AXP313a PMIC to X-Powers AXP20X
- Add support for RK806 to Rockchip RK8XX
Removed Device Support:
- Removed MFD support for Richtek RT5033 Battery
Fix-ups:
- Remove superfluous code
- Switch I2C drivers from .probe_new() to .probe()
- Convert over to managed resources (devm_*(), etc)
- Use dev_err_probe() for returning errors from .probe()
- Add lots of Device Tree bindings / support
- Improve cache efficiency by switching to Maple
- Use own exported namespaces (NS)
- Include missing and remove superfluous headers
- Start using / convert to the new shutdown sys-off API
- Trivial: variable / define renaming
- Make use of of_property_read_reg() when requesting DT 'reg's
Bug Fixes:
- Fix chip revision readout due to incorrect data masking
- Amend incorrect register and mask values used for charger state
- Hide unused functionality at compile time
- Fix resource leaks following error handling routines
- Return correct error values and fix error handling in general
- Repair incorrect device names - used for device matching
- Remedy broken module auto-loading"
* tag 'mfd-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (51 commits)
dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540
iio: adc: max77541: Add ADI MAX77541 ADC Support
regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support
dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator
mfd: Switch two more drivers back to use struct i2c_driver::probe
dt-bindings: mfd: samsung,s5m8767: Simplify excluding properties
mfd: stmpe: Only disable the regulators if they are enabled
mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
dt-bindings: mfd: gateworks-gsc: Remove unnecessary fan-controller nodes
mfd: core: Use of_property_read_reg() to parse "reg"
mfd: stmfx: Nullify stmfx->vdd in case of error
mfd: stmfx: Fix error path in stmfx_chip_init
mfd: intel-lpss: Add missing check for platform_get_resource
mfd: stpmic1: Add PMIC poweroff via sys-off handler
mfd: stpmic1: Fixup main control register and bits naming
dt-bindings: mfd: qcom,tcsr: Add the compatible for IPQ8074
mfd: tps65219: Add support for soft shutdown via sys-off API
mfd: pm8008: Drop bogus i2c module alias
mfd: pm8008: Fix module autoloading
mfd: tps65219: Add GPIO cell instance
...
|
||
|
Linus Torvalds
|
99bdeae21d |
tegra: support for Tegra264
broadcom: convert bcm2835 bindings from txt to yaml bcm2835 qcom: support for IPQ5018 ti: always zero TX data fields -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE6EwehDt/SOnwFyTyf9lkf8eYP5UFAmSiMrMACgkQf9lkf8eY P5X3eA/+LraCJ/U5IB03A8UZOwPi5Eclo3mZqkNS0d8aG/guJzz2Z3GaFGgo7IIu WAJJsyNWURAZhyGVc+5rEWOhXHf4JMAl8ANuh4kJ3bKAYJ8/5n2rjpcwYPNcnhYO qZbdxrEBGVgCbyKb/g8s7CIGApTYzsoG4k5aRX+u+Iv2qIuTf2dz+TiNr20z8jpu JiEnPJujcgGZw1d24P7wBCqHQhoEhOKCQ0hV5tvFoT9MeEnSG5J+5nT5rkJweXBC WoQ4l1VWASWarYGuDQ8ghYtlapZrUbbrL4aw9qmw+pBRj1wlLNXGOYGA1GBbwCjp sZ9veDutyc3vDJ7thl/LaAe6E3xtJsCDalY9SiazrWueVS8CrdSx7LwLhLLy1U2Y tB7KzGHg70dTTQqm1nS7Oin3BpT1baHSIEPjPG8ZLZ9oEpoAgIjC7E+fOxpLrLQO vwe7LMwz0RetLJiFAetKPRRJpRNZR7NhC+AAIFcyx8+ydylZLyMDbXJ0UZmLCfiW zp8S6qb9dTmW0kn4aSkCDeZEw4tQtot6Oj+EaQuwX69ba20157x8edOgS9xm8TX9 wkLQszldwFooLqbBtV5LA04bQ1DbdPhYNuNofAVqzwJHZK9+Z/2NFIyfP2VvaSQg FSNuBbEGnpCGHYY85PM3nhf1ynkO6ZIdKbURrEP7yyOzveJ6X2w= =kdOT -----END PGP SIGNATURE----- Merge tag 'mailbox-v6.5' of git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - tegra: support for Tegra264 - broadcom: convert bcm2835 bindings from txt to yaml bcm2835 - qcom: support for IPQ5018 - ti: always zero TX data fields * tag 'mailbox-v6.5' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: ti-msgmgr: Fill non-message tx data fields with 0x0 mailbox: tegra: add support for Tegra264 dt-bindings: mailbox: tegra: Document Tegra264 HSP dt-bindings: mailbox: convert bcm2835-mbox bindings to YAML dt-bindings: mailbox: qcom: Add IPQ5018 APCS compatible |
||
|
Linus Torvalds
|
b349de4c91 |
RTC for 6.5
Subsystem: - Switch i2c drivers back to use .probe() - Constify pointers to hwmon_channel_info New driver: - Loongson on chip RTC, replacing the Loongson 1 only driver Drivers: - isl1208: cleanup and support for RAA215300 - st-lpc: cleanups - stm32: fix wakeup -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmSh9hIACgkQY6TcMGxw OjL53Q//SgdS6dFJwaWrol+MihLa092PkrVHLnBiPfA77huVSFPkPb1hD+1/PWGe ThTwXypQwiFk1hrLQUHLM8NiUo5DmmRrDlphSLrmCOloB0d0fNpfhH6FU5yOP9V4 XoYaQlY3FX8RXqHYjn5Vc5Fp1pSyNGo4MAzYbMb8j/hrTJmRFocbdygQiHjrKgIp mOegYrffrMZz24vCAIs3mvT2mgBmDxe7QwuI2Wmbm0ZLfEigv1ETIHGUyBfjTMJH ZAd0MA9dg1+hLJw4BkJFo6PpvKEY6wjquP+1nKQpfSB3kfOyEeXtf9Y9M3cXEj36 u8EDSfz0xrHpd4W0XzakeD90tovsCRWeA5sNooefwz5BJQ3aJjGfDZTXCEaWGV4S fQ7TS2pz2+ZzW3nBUFxtVD0SmctovixO8KOwhmMhCJXz3XprVdmulD6PTheRNZ/Z edJdty0XTYMYpvIQuaxO/bA4Df4PB4FSBHtKPg2w+KMxDivr+fS/klxSo3OcLJIU 7EZMcJ7Ygvdw4a7/QZZbWEaJrnZ7XerFOFRdXggdTdhy1ozSObtXpJTdXL5/6hR5 6if0fbGYVSjUkooj+oEaCihpc+8tmbdKk+iC55Gkay9M2lCbbeXSy9VFLKP/UnnU q7NUYRTDWgAjJAleHG9TSO02iS+nKZ6dv+IRVL01mVSVxglSQpg= =+0zF -----END PGP SIGNATURE----- Merge tag 'rtc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "The isl1208 dirver was reworked tobe able to work as part of an MFD. All the Loongson chips are now supported through a new driver, the old one is removed. Summary: Subsystem: - Switch i2c drivers back to use .probe() - Constify pointers to hwmon_channel_info New driver: - Loongson on chip RTC, replacing the Loongson 1 only driver Drivers: - isl1208: cleanup and support for RAA215300 - st-lpc: cleanups - stm32: fix wakeup" * tag 'rtc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (21 commits) rtc: Add rtc driver for the Loongson family chips rtc: Remove the Loongson-1 RTC driver dt-bindings: rtc: Split loongson,ls2x-rtc into SoC-based compatibles rtc: rv3028: make rv3028 probeable from userspace rtc: isl1208: Add support for the built-in RTC on the PMIC RAA215300 rtc: isl1208: Add isl1208_set_xtoscb() rtc: isl1208: Drop enum isl1208_id and split isl1208_configs[] rtc: isl1208: Make similar I2C and DT-based matching table rtc: isl1208: Drop name variable dt-bindings: rtc: isil,isl1208: Document clock and clock-names properties dt-bindings: rtc: isl1208: Convert to json-schema rtc: st-lpc: Simplify clk handling in st_rtc_probe() rtc: st-lpc: Release some resources in st_rtc_probe() in case of error rtc: stm32: remove dedicated wakeup management dt-bindings: rtc: restrict node name suffixes rtc: add HAS_IOPORT dependencies rtc: Switch i2c drivers back to use .probe() rtc: rv3032: constify pointers to hwmon_channel_info rtc: isl12022: constify pointers to hwmon_channel_info rtc: ds3232: constify pointers to hwmon_channel_info ... |
||
|
Linus Torvalds
|
5d95ff84e6 |
This update includes the following changes:
API: - Add linear akcipher/sig API. - Add tfm cloning (hmac, cmac). - Add statesize to crypto_ahash. Algorithms: - Allow only odd e and restrict value in FIPS mode for RSA. - Replace LFSR with SHA3-256 in jitter. - Add interface for gathering of raw entropy in jitter. Drivers: - Fix race on data_avail and actual data in hwrng/virtio. - Add hash and HMAC support in starfive. - Add RSA algo support in starfive. - Add support for PCI device 0x156E in ccp. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmSdECcACgkQxycdCkmx i6dW3g//a4DR6aaqYF8pU4svAzO56a0Plx3DVHUiJ4ygRB7xOzrQqXjCren6wY2a LFuetwxebAhIAPsC79vI+3j8VAIlU9cNVqOxBIJHGY7wFO4m1AjqBjlealzqLrth +nEIeUibqLeRw7imOO4adzSsKuSQgyU5rPtKWfrGqqI3RhuMgfWroCtmJ82jmq5l uMZgB+aGGkzyXztxubHRPeJ3nOFEzo95SscpJ43lOjMcURRBhEa+20jXDhUGwpI7 9ycFV31AW+tfkIprAcliiIzZuwIbzlCkte6AxjAVsN100T/wh9JS1Y+uf1P0oZ9y AUQQKyc8/QpSkzHZPTncat5P6zta28r8Q5neCvEEEGGuOE8Oc6kb0Os+RE5ANMU4 2A/zrKGOMIWeEWwXGc51xT3gxyl/Rn5wLw1pW7Lm4d5osGT9jiVXx/g66hKLpagJ jegI6CqgvUajkRNi7JPVnSAauu0Ay8O6pU37/8gLOXNGVZBqONpRimk9qB05LNSF QYzM2sgYv1tQEmjnG8jLhF5Z8brnqYTv2TZwBX43W10EDQNqUYUDff9Flean5xCb +2mxJc81rgtUffnMXyYvQwKLhVKoLpeLR6Ts455S5aP06WAfoyEJyYTA/LHG24GX H2HdS9g5y/K15k9yygMWaXgAx7O7MjM9gEa2VQakhnByj/eQM0s= =rOLu -----END PGP SIGNATURE----- Merge tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add linear akcipher/sig API - Add tfm cloning (hmac, cmac) - Add statesize to crypto_ahash Algorithms: - Allow only odd e and restrict value in FIPS mode for RSA - Replace LFSR with SHA3-256 in jitter - Add interface for gathering of raw entropy in jitter Drivers: - Fix race on data_avail and actual data in hwrng/virtio - Add hash and HMAC support in starfive - Add RSA algo support in starfive - Add support for PCI device 0x156E in ccp" * tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (85 commits) crypto: akcipher - Do not copy dst if it is NULL crypto: sig - Fix verify call crypto: akcipher - Set request tfm on sync path crypto: sm2 - Provide sm2_compute_z_digest when sm2 is disabled hwrng: imx-rngc - switch to DEFINE_SIMPLE_DEV_PM_OPS hwrng: st - keep clock enabled while hwrng is registered hwrng: st - support compile-testing hwrng: imx-rngc - fix the timeout for init and self check KEYS: asymmetric: Use new crypto interface without scatterlists KEYS: asymmetric: Move sm2 code into x509_public_key KEYS: Add forward declaration in asymmetric-parser.h crypto: sig - Add interface for sign/verify crypto: akcipher - Add sync interface without SG lists crypto: cipher - On clone do crypto_mod_get() crypto: api - Add __crypto_alloc_tfmgfp crypto: api - Remove crypto_init_ops() crypto: rsa - allow only odd e and restrict value in FIPS mode crypto: geniv - Split geniv out of AEAD Kconfig option crypto: algboss - Add missing dependency on RNG2 crypto: starfive - Add RSA algo support ... |
||
Peter De Schrijver
|
af9dbbbb4d |
dt-bindings: mailbox: tegra: Document Tegra264 HSP
Add the compatible string for the HSP block found on the Tegra264 SoC. The HSP block in Tegra264 is not register compatible with the one in Tegra194 or Tegra234 hence there is no fallback compatibility string. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> |
||
Stefan Wahren
|
ebb0130dad |
dt-bindings: mailbox: convert bcm2835-mbox bindings to YAML
Convert the DT binding document for bcm2835-mbox from .txt to YAML. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> |
||
Manikanta Mylavarapu
|
13ad4b7ce6 |
dt-bindings: mailbox: qcom: Add IPQ5018 APCS compatible
Add compatible for the Qualcomm IPQ5018 APCS block. Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> |
||
|
Linus Torvalds
|
9070577ae9 |
pci-v6.5-changes
-----BEGIN PGP SIGNATURE-----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=xpTd
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Export pcie_retrain_link() for use outside ASPM
- Add Data Link Layer Link Active Reporting as another way for
pcie_retrain_link() to determine the link is up
- Work around link training failures (especially on the ASMedia
ASM2824 switch) by training first at 2.5GT/s and then attempting
higher rates
Resource management:
- When we coalesce host bridge windows, remove invalidated resources
from the resource tree so future allocations work correctly
Hotplug:
- Cancel bringup sequence if card is not present, to keep from
blinking Power Indicator indefinitely
- Reassign bridge resources if necessary for ACPI hotplug
Driver binding:
- Convert platform_device .remove() callbacks to return void instead
of a mostly useless int
Power management:
- Reduce wait time for secondary bus to be ready to speed up resume
- Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in
D3cold
- Call _REG when transitioning D-states so AML that uses the PCI
config space OpRegion works, which fixes some ASMedia GPIO
controllers after resume
Virtualization:
- Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM
hang when guest is rebooted
- Add function 1 DMA alias quirk for Marvell 88SE9235
Error handling:
- Unexport pci_save_aer_state() since it's only used in drivers/pci/
- Drop recommendation for drivers to configure AER Capability, since
the PCI core does this for all devices
ASPM:
- Disable ASPM on MFD function removal to avoid use-after-free
- Tighten up pci_enable_link_state() and pci_disable_link_state()
interfaces so they don't enable/disable states the driver didn't
specify
- Avoid link retraining race that can happen if ASPM sets link
control parameters while the link is in the midst of training for
some other reason
Endpoint framework:
- Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be
different from "PCI Endpoint NTB driver"
- Automatically create a function specific attributes group for
endpoint drivers to avoid reference counting issues
- Fix many EPC test issues
- Return pci_epf_type_add_cfs() error if EPF has no driver
- Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq()
MSI vector parameters
- Pass EPF device ID to driver probe functions
- Return -EALREADY if EPC has already been started/stopped
- Add linkdown notifier support and use it in qcom-ep
- Add Bus Master Enable event support and use it in qcom-ep
- Add Qualcomm Modem Host Interface (MHI) endpoint driver
- Add Layerscape PME interrupt handling to manage link-up
notification
Cadence PCIe controller driver:
- Wait for link retrain to complete when working around the J721E
i2085 erratum with Gen2 mode
Faraday FTPC100 PCI controller driver:
- Release clock resources on error paths
Freescale i.MX6 PCIe controller driver:
- Save and restore Root Port MSI control to work around hardware defect
Intel VMD host bridge driver:
- Reset VMD config register between soft reboots
- Capture pci_reset_bus() return value instead of printing junk when
it fails
Qualcomm PCIe controller driver:
- Add SDX65 endpoint compatible string to DT binding
- Disable register write access after init for IP v2.3.3, v2.9.0
- Use DWC helpers for enabling/disabling writes to DBI registers
- Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2,
v2.3.3, v2.7.0, v2.9.0
- Reuse v2.3.2 post-init sequence for v2.4.0
Renesas R-Car PCIe controller driver:
- Remove unused static pcie_base and pcie_dev
Rockchip PCIe controller driver:
- Remove writes to unused registers
- Write endpoint Device ID using correct register
- Assert PCI Configuration Enable bit after probe so endpoint
responds instead of generating Request Retry Status messages
- Poll waiting for PHY PLLs to lock
- Update RK3399 example DT binding to be valid
- Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of
manually generating PCIe message
- Use multiple windows to avoid address translation conflicts
- Use u32 (not u16) when accessing 32-bit registers
- Hide MSI-X Capability, since RK3399 can't generate MSI-X
- Set endpoint controller required alignment to 256
Synopsys DesignWare PCIe controller driver:
- Wait for link to come up only if we've initiated link training
Miscellaneous:
- Add pci_clear_master() stub for non-CONFIG_PCI"
* tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
Documentation: PCI: correct spelling
PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()
PCI: xgene-msi: Convert to platform remove callback returning void
PCI: tegra: Convert to platform remove callback returning void
PCI: rockchip-host: Convert to platform remove callback returning void
PCI: mvebu: Convert to platform remove callback returning void
PCI: mt7621: Convert to platform remove callback returning void
PCI: mediatek-gen3: Convert to platform remove callback returning void
PCI: mediatek: Convert to platform remove callback returning void
PCI: iproc: Convert to platform remove callback returning void
PCI: hisi-error: Convert to platform remove callback returning void
PCI: dwc: Convert to platform remove callback returning void
PCI: j721e: Convert to platform remove callback returning void
PCI: brcmstb: Convert to platform remove callback returning void
PCI: altera-msi: Convert to platform remove callback returning void
PCI: altera: Convert to platform remove callback returning void
PCI: aardvark: Convert to platform remove callback returning void
PCI: rcar: Use correct product family name for Renesas R-Car
PCI: layerscape: Add the endpoint linkup notifier support
PCI: endpoint: pci-epf-vntb: Fix typo in comments
...
|
||
|
Linus Torvalds
|
28968f384b |
Pin control changes for the v6.5 kernel cycle:
No core changes this time. New drivers: - Tegra234 support. - Qualcomm IPQ5018 support. - Intel Meteor Lake-S support. - Qualcomm SDX75 subdriver. - Qualcomm SPMI-based PM8953 support. Improvements: - Fix up support for GPIO3 on the AXP209. - Push-pull drive configuration support for the AT91 PIO4. - Fix misc non-urgent bugs in the AMD driver. - Misc non-urgent improved error handling. - Misc janitorial and minor improvements. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmSdNYkACgkQQRCzN7AZ XXN/Cw/+KLRYq3iBC4u8OkII9aDdCxyR+0QV/zz/ZeiEN54tICrymSSE3SG3jw13 MMxAlZ3Yi/H1VelCrq+/2wLB8ydL+QnrQbs47JaIftdqfybgyyvHd354jtRktqQ2 NS1Nxbog1uljwjj835XXx5CV0JSTXhFQXAGc3a06ZV/JdoixazsHWrlRn9vGY3VX umb/cIaNBeQ4p9QBusV7hiz/KFfC90YyJvEfNlmXxahcd25011Hq+dLFj4jsWbud 4eEMag+zoxdSdORBU789Kjxejx1maGTyuGzWuQ/rkDgcG00pZf454ShLlbUsPdui TaU6gKC8/EBAp5rgtf1tGXF42sJEKpKsDmzzdYojLq3PH/H03r3qqB7VLqmXlehn mq5eP0DXgcdcsp/dkVa3jrWTvGPRcGfF996L3X2odl8YhoHrd6qbhYLjknZW8Eph QOcyHdtJfjZjJQnM9FfljAD5GSKfyIAhc5PX9yAkkN8mQlw8px4Z9Cqn/F0B57o7 K8FWSkgeM5chZ5Xy+C7TYw6yLsG2WuYahKd+mmUMVrEfAJg+ZUQRpXdoPDLNBkYQ PkL/MoNUpwsaFMu8ATgpIcUAQsfF57Yv8t1OOLg/GLupGqOtCgHb5dvbWstiFcN4 r4Wew7i2cadXJnL8WBpqdpbye1rsVh0I/ANoN6o2AbEz1yfe7Eo= =MMUo -----END PGP SIGNATURE----- Merge tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "No core changes this time New drivers: - Tegra234 support - Qualcomm IPQ5018 support - Intel Meteor Lake-S support - Qualcomm SDX75 subdriver - Qualcomm SPMI-based PM8953 support Improvements: - Fix up support for GPIO3 on the AXP209 - Push-pull drive configuration support for the AT91 PIO4 - Fix misc non-urgent bugs in the AMD driver - Misc non-urgent improved error handling - Misc janitorial and minor improvements" * tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits) pinctrl: cherryview: Drop goto label pinctrl: baytrail: invert if condition pinctrl: baytrail: add warning for BYT_VAL_REG retrieval failure pinctrl: baytrail: reduce scope of spinlock in ->dbg_show() hook pinctrl: tegra: avoid duplicate field initializers dt-bindings: pinctrl: qcom,sdx65-tlmm: add pcie_clkreq function pinctrl: mlxbf3: remove broken Kconfig 'select' pinctrl: spear: Remove unused of_gpio.h inclusion pinctrl: lantiq: Remove unused of_gpio.h inclusion pinctrl: at91-pio4: check return value of devm_kasprintf() pinctrl: microchip-sgpio: check return value of devm_kasprintf() pinctrl: freescale: Fix a memory out of bounds when num_configs is 1 pinctrl: intel: refine ->irq_set_type() hook pinctrl: intel: refine ->set_mux() hook pinctrl: baytrail: Use str_hi_lo() helper lib/string_choices: Add str_high_low() helper lib/string_helpers: Split out string_choices.h lib/string_helpers: Add missing header files to MAINTAINERS database pinctrl: npcm7xx: Add missing check for ioremap pinctrl:sunplus: Add check for kmalloc ... |
||
|
Linus Torvalds
|
ca7ce08d6a |
SCSI misc on 20230629
Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
lpfc, qla2xxx). We have a couple of major core changes impacting
other systems: Command Duration Limits, which spills into block and
ATA and block level Persistent Reservation Operations, which touches
block, nvme, target and dm (both of which are added with merge commits
containing a cover letter explaining what's going on).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZJ19cSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfZpAQCQBuWR
ELcOhsaG5KzO6xLWcH8mjsOoxffKvazZjTKXlAD5ATEv7++E250oKS3t+yfjae5I
Lc195MlDju85ItUQgfk=
=U9ik
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
lpfc, qla2xxx).
We have a couple of major core changes impacting other systems:
- Command Duration Limits, which spills into block and ATA
- block level Persistent Reservation Operations, which touches block,
nvme, target and dm
Both of these are added with merge commits containing a cover letter
explaining what's going on"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits)
scsi: core: Improve warning message in scsi_device_block()
scsi: core: Replace scsi_target_block() with scsi_block_targets()
scsi: core: Don't wait for quiesce in scsi_device_block()
scsi: core: Don't wait for quiesce in scsi_stop_queue()
scsi: core: Merge scsi_internal_device_block() and device_block()
scsi: sg: Increase number of devices
scsi: bsg: Increase number of devices
scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue
scsi: ufs: ufs-pci: Add support for Intel Arrow Lake
scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT
scsi: ufs: wb: Add explicit flush_threshold sysfs attribute
scsi: ufs: ufs-qcom: Switch to the new ICE API
scsi: ufs: dt-bindings: qcom: Add ICE phandle
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR
scsi: ufs: core: Remove dedicated hwq for dev command
scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command
scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes
...
|
||
|
Linus Torvalds
|
1546cd4bfd |
ata changes for 6.5-rc1
- Add support for the .remove_new callback to the ata_platform code to
simplify device removal interface (Uwe).
- Code simplification in ata_dev_revalidate() (Yahu)
- Fix code indentation and coding style in the pata_parport protocol
modules to avoid warnings from static code analyzers (me)
- Clarify ata_eh_qc_retry() behavior with better comments (Niklas)
- Simplify and improve ata_change_queue_depth() behavior to have a
consistent behavior between libsas managed devices and libata managed
devices (e.g. AHCI connected devices) (me).
- Cleanup libata-scsi and libata-eh code to use the ata_ncq_enabled()
and ata_ncq_supported() helpers instead of open coding flags tests
(me)
- Cleanup ahci_reset_controller() code (me).
- Change the pata_octeon_cf and sata_svw drivers to use
of_property_read_reg() to simplify the code (Rob, me).
- Remove unnecessary include files from ahci_octeon driver (me)
- Modify the DesignWare ahci dt bindings to add support for the
Rockchip RK3588 AHCI (Sebastian).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZJourwAKCRDdoc3SxdoY
dv43AQDzAFY0/0sjvqltGC31wRzzh/vEQFWsYt89Q4csMr4QgAEAkLO1gquH5/Wt
sxnCLh1WdFqbyNy6xsw+CXrfeREGDgo=
=IzEr
-----END PGP SIGNATURE-----
Merge tag 'ata-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata updates from Damien Le Moal:
- Add support for the .remove_new callback to the ata_platform code to
simplify device removal interface (Uwe)
- Code simplification in ata_dev_revalidate() (Yahu)
- Fix code indentation and coding style in the pata_parport protocol
modules to avoid warnings from static code analyzers (me)
- Clarify ata_eh_qc_retry() behavior with better comments (Niklas)
- Simplify and improve ata_change_queue_depth() behavior to have a
consistent behavior between libsas managed devices and libata managed
devices (e.g. AHCI connected devices) (me)
- Cleanup libata-scsi and libata-eh code to use the ata_ncq_enabled()
and ata_ncq_supported() helpers instead of open coding flags tests
(me)
- Cleanup ahci_reset_controller() code (me)
- Change the pata_octeon_cf and sata_svw drivers to use
of_property_read_reg() to simplify the code (Rob, me)
- Remove unnecessary include files from ahci_octeon driver (me)
- Modify the DesignWare ahci dt bindings to add support for the
Rockchip RK3588 AHCI (Sebastian)
* tag 'ata-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (29 commits)
dt-bindings: phy: rockchip: rk3588 has two reset lines
dt-bindings: ata: dwc-ahci: add Rockchip RK3588
dt-bindings: ata: dwc-ahci: add PHY clocks
ata: ahci_octeon: Remove unnecessary include
ata: pata_octeon_cf: Add missing header include
ata: ahci: Cleanup ahci_reset_controller()
ata: Use of_property_read_reg() to parse "reg"
ata: libata-scsi: Use ata_ncq_supported in ata_scsi_dev_config()
ata: libata-eh: Use ata_ncq_enabled() in ata_eh_speed_down()
ata: libata-sata: Improve ata_change_queue_depth()
ata: libata-sata: Simplify ata_change_queue_depth()
ata: libata-eh: Clarify ata_eh_qc_retry() behavior at call site
ata: pata_parport: Fix on26 module code indentation and style
ata: pata_parport: Fix on20 module code indentation and style
ata: pata_parport: Fix ktti module code indentation and style
ata: pata_parport: Fix kbic module code indentation and style
ata: pata_parport: Fix friq module code indentation and style
ata: pata_parport: Fix fit3 module code indentation and style
ata: pata_parport: Fix fit2 module code indentation and style
ata: pata_parport: Fix epia module code indentation and style
...
|
||
|
Krzysztof Kozlowski
|
f0ac350496 |
dt-bindings: timestamp: restrict node name suffixes
Make the pattern matching node names a bit stricter to improve DTS consistency. The pattern is restricted to -N suffixes to decimal numbers. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230530144851.92059-7-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Krzysztof Kozlowski
|
fee34f7b6d |
dt-bindings: slimbus: restrict node name suffixes
Make the pattern matching node names a bit stricter to improve DTS consistency. The pattern is restricted to: 1. Only one unit address or one -N suffix, 2. -N suffixes to decimal numbers. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230530144851.92059-5-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Krzysztof Kozlowski
|
6cca6cf3f5 |
dt-bindings: watchdog: restrict node name suffixes
Make the pattern matching node names a bit stricter to improve DTS consistency. The pattern is restricted to -N suffixes to decimal numbers. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Tony Lindgren <tony@atomide.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230530144851.92059-8-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> |
||
Nikita Bondarenko
|
c51251083a |
dt-bindings: watchdog: brcm,kona-wdt: convert txt file to yaml
Converted txt file to yaml. No additional changes. Signed-off-by: Nikita Bondarenko <n2h9z4@gmail.com> Link: https://lore.kernel.org/r/20230418170341.28805-1-n2h9z4@gmail.com Signed-off-by: Rob Herring <robh@kernel.org> |
||
Srinivas Neeli
|
6592d29393 |
dt-bindings: watchdog: cdns,wdt-r1p2: Convert cadence watchdog to yaml
Convert cadence watchdog bindings to DT schema format using json-schema. Signed-off-by: Srinivas Neeli <srinivas.neeli@amd.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230601052237.2604997-1-srinivas.neeli@amd.com Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Linus Torvalds
|
533925cb76 |
RISC-V Patches for the 6.5 Merge Window, Part 1
* Support for ACPI. * Various cleanups to the ISA string parsing, including making them case-insensitive * Support for the vector extension. * Support for independent irq/softirq stacks. * Our CPU DT binding now has "unevaluatedProperties: false" -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmSe70ATHHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiWNPD/0ZfSdQ0A/gMVOzAD4zFKPEqQ6ffW2V Zy6Jo7UDNqKsiai7QA4XB1uyYIv/y1yUKJ0oeBVcA9Nzyq+TW9QDcApDBTabxAUI agY19YKw6VVZ+p7I9sMsf6EbdJdkNfSAzcQACPxb4ScEoaf9X+oAK5qgXuRuWluh qQuVkkJlgWc/t1cuUkrRdJmHQYvjP3zL7z4o344q2IVpXJkNNu0GeP+HbF8BYKcA +I/TTA5JY3kCIaxkpF2rU6pE6T5T9xrPmRYZ7bZoPUPnbL+M8As/jx3ym52Y4WGp kf8pgkxixOjU64kVJOH66CA8GaOiaAH/ptjQb0ZmCaGrHhr7aOT9HrkX4rU1lS8T stPphfM4gGPcCoPgRqSl+mEhBzjII8maOBLtbricAoQi6efRq8fzoOGaif/QpCbc 6n0LGS4nQPGVyD3rAPfHxxfrlGJR+SsgyDvjZoDhqauFglims14GnK+eBeO8zrui Aj/uuAS63VIYprJWC1NOBJlU2WKZiOGhCANpZ6W6SH21PYn2WjsVILqaGh+WN8ZO KOHxZNaN8fQag0Yg7oNAUb7l6S0DHYtJIksFnFW2Rf2+VT58RAMYRQbpbhr7Tqr+ jLgIR8PkFrBERHE49IqLGhAxGDnNzAUysMRw9pIk7WIre2Jt4wPqUdl+ee+5ErIX jiYfSFZw9q28UA== =Fpq8 -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Support for ACPI - Various cleanups to the ISA string parsing, including making them case-insensitive - Support for the vector extension - Support for independent irq/softirq stacks - Our CPU DT binding now has "unevaluatedProperties: false" * tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (78 commits) riscv: hibernate: remove WARN_ON in save_processor_state dt-bindings: riscv: cpus: switch to unevaluatedProperties: false dt-bindings: riscv: cpus: add a ref the common cpu schema riscv: stack: Add config of thread stack size riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK riscv: stack: Support HAVE_IRQ_EXIT_ON_IRQ_STACK RISC-V: always report presence of extensions formerly part of the base ISA dt-bindings: riscv: explicitly mention assumption of Zicntr & Zihpm support RISC-V: remove decrement/increment dance in ISA string parser RISC-V: rework comments in ISA string parser RISC-V: validate riscv,isa at boot, not during ISA string parsing RISC-V: split early & late of_node to hartid mapping RISC-V: simplify register width check in ISA string parsing perf: RISC-V: Limit the number of counters returned from SBI riscv: replace deprecated scall with ecall riscv: uprobes: Restore thread.bad_cause riscv: mm: try VMA lock-based page fault handling first riscv: mm: Pre-allocate PGD entries for vmalloc/modules area RISC-V: hwprobe: Expose Zba, Zbb, and Zbs RISC-V: Track ISA extensions per hart ... |
||
|
Linus Torvalds
|
d35ac6ac0e |
IOMMU Updates for Linux v6.5
Including:
- Core changes:
- iova_magazine_alloc() optimization
- Make flush-queue an IOMMU driver capability
- Consolidate the error handling around device attachment
- AMD IOMMU changes:
- AVIC Interrupt Remapping Improvements
- Some minor fixes and cleanups
- Intel VT-d changes from Lu Baolu:
- Small and misc cleanups
- ARM-SMMU changes from Will Deacon:
- Device-tree binding updates:
* Add missing clocks for SC8280XP and SA8775 Adreno SMMUs
* Add two new Qualcomm SMMUs in SDX75 and SM6375
- Workarounds for Arm MMU-700 errata:
* 1076982: Avoid use of SEV-based cmdq wakeup
* 2812531: Terminate command batches with a CMD_SYNC
* Enforce single-stage translation to avoid nesting-related errata
- Set the correct level hint for range TLB invalidation on teardown
- Some other minor fixes and cleanups (including Freescale PAMU and
virtio-iommu changes)
-----BEGIN PGP SIGNATURE-----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=aRMe
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- iova_magazine_alloc() optimization
- Make flush-queue an IOMMU driver capability
- Consolidate the error handling around device attachment
AMD IOMMU changes:
- AVIC Interrupt Remapping Improvements
- Some minor fixes and cleanups
Intel VT-d changes from Lu Baolu:
- Small and misc cleanups
ARM-SMMU changes from Will Deacon:
- Device-tree binding updates:
- Add missing clocks for SC8280XP and SA8775 Adreno SMMUs
- Add two new Qualcomm SMMUs in SDX75 and SM6375
- Workarounds for Arm MMU-700 errata:
- 1076982: Avoid use of SEV-based cmdq wakeup
- 2812531: Terminate command batches with a CMD_SYNC
- Enforce single-stage translation to avoid nesting-related errata
- Set the correct level hint for range TLB invalidation on teardown
.. and some other minor fixes and cleanups (including Freescale PAMU
and virtio-iommu changes)"
* tag 'iommu-updates-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (50 commits)
iommu/vt-d: Remove commented-out code
iommu/vt-d: Remove two WARN_ON in domain_context_mapping_one()
iommu/vt-d: Handle the failure case of dmar_reenable_qi()
iommu/vt-d: Remove unnecessary (void*) conversions
iommu/amd: Remove extern from function prototypes
iommu/amd: Use BIT/BIT_ULL macro to define bit fields
iommu/amd: Fix DTE_IRQ_PHYS_ADDR_MASK macro
iommu/amd: Fix compile error for unused function
iommu/amd: Improving Interrupt Remapping Table Invalidation
iommu/amd: Do not Invalidate IRT when IRTE caching is disabled
iommu/amd: Introduce Disable IRTE Caching Support
iommu/amd: Remove the unused struct amd_ir_data.ref
iommu/amd: Switch amd_iommu_update_ga() to use modify_irte_ga()
iommu/arm-smmu-v3: Set TTL invalidation hint better
iommu/arm-smmu-v3: Document nesting-related errata
iommu/arm-smmu-v3: Add explicit feature for nesting
iommu/arm-smmu-v3: Document MMU-700 erratum 2812531
iommu/arm-smmu-v3: Work around MMU-600 erratum 1076982
dt-bindings: arm-smmu: Add SDX75 SMMU compatible
dt-bindings: arm-smmu: Add SM6375 GPU SMMU
...
|
||
|
Linus Torvalds
|
e4c8d01865 |
ARM: SoC drivers for 6.5
Nothing surprising in the SoC specific drivers, with the usual updates:
* Added or improved SoC driver support for Tegra234, Exynos4121, RK3588,
as well as multiple Mediatek and Qualcomm chips
* SCMI firmware gains support for multiple SMC/HVC transport and version
3.2 of the protocol
* Cleanups amd minor changes for the reset controller, memory controller,
firmware and sram drivers
* Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers
-----BEGIN PGP SIGNATURE-----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=zvLr
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual
updates:
- Added or improved SoC driver support for Tegra234, Exynos4121,
RK3588, as well as multiple Mediatek and Qualcomm chips
- SCMI firmware gains support for multiple SMC/HVC transport and
version 3.2 of the protocol
- Cleanups amd minor changes for the reset controller, memory
controller, firmware and sram drivers
- Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers"
* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
MAINTAINERS: add PHY-related files to Amlogic SoC file list
drivers: meson: secure-pwrc: always enable DMA domain
tee: optee: Use kmemdup() to replace kmalloc + memcpy
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
dt-bindings: memory-controllers: drop unneeded quotes
soc: rockchip: dtpm: use C99 array init syntax
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
...
|
||
|
Linus Torvalds
|
a9025a5f16 |
ARM: New SoC support for 6.5
There are two new SoC families this time, and both appear fairly similar: The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are both dual-core Cortex-A35 based chips for the low-power industrial embedded market, and they mark the first 64-bit product in a widely used family of 32-bit Arm MCUs and SoCs. The way into the kernel is completely different here: The team at ST has a long history of working upstream with their STM32MP1 and other SoCs, and they produced a complete port to arm64 together with the initial announcement. Nuvoton also has multiple SoC product lines with current or previous upstream support, but those are maintained by third parties and are unrelated. The patch series from Nuvoton's Jacky Huang had to go through many revisisions to get to this point and is still missing a few drivers including the serial port for the moment. The branch contains the devicetree files as well as all the code changes, in order to have something that can be tested standalone. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmScqtkACgkQYKtH/8kJ Uifqyg//XgvZBxb/2GILYcThVgLoo1fYA9tG5M0LERY/aPiUwrCwIl5swGQXK4vK E3UBLsQURer4yEBRq7iB6RGbwa4Opjdy3yTkj6WSgEMPh6e6jGvmm+dJ7HuWeviS 8oeyo3Xar6tIF+A8xlBloHA4J6690FYB40McQzh8sWG5SE+id56S71NGnNW0kQTn wsul9BZcGVoyMYNBi/uXtOVUPy7jF3UBC3HJF9UOT7q77bCLjVc/aHmmnZ3zmbYA 2oX3X5hVJakFba6vnz+rjNlzuAoGXJPDdsKFxBysdsksac/TxqRIQGNe75DZZVgz ESTpt1QqjmCFw32HEzi8Ne22FOpzlBqUxBMznHPenpz1/om2ezs3q7ffuPqKvMaq PANuK++JKJaBChVMzJbn84Sr1fvO4ecGJpKZTFC6t6SqHQNQFJT6rfMHx01Xw2wW LjKfEBCR6zEXN0+FaaujgJ4y/9pH1VHPynrZJG9WEwPUEZb2kJ/2RMXjNpzOWKiB pWYV1oW2TqFKYKhFm/pjkbi6Rq76UwEi8fWWoGMkmeV3KZ/0GFauQhItu6mX3s7W uGnUQyrBzWzUoashYFuNtXKHYdwuWgOmG660BXHkyxwvqV96ICGEJ+97zGIBDj81 F8zLxEjPbsEZqGGSosAyk9oYC6eh7eK2V7xx+CUYLTuKZw13zNo= =zaVi -----END PGP SIGNATURE----- Merge tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull new ARM SoC support from Arnd Bergmann: "There are two new SoC families this time, and both appear fairly similar: The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are both dual-core Cortex-A35 based chips for the low-power industrial embedded market, and they mark the first 64-bit product in a widely used family of 32-bit Arm MCUs and SoCs. The way into the kernel is completely different here: The team at ST has a long history of working upstream with their STM32MP1 and other SoCs, and they produced a complete port to arm64 together with the initial announcement. Nuvoton also has multiple SoC product lines with current or previous upstream support, but those are maintained by third parties and are unrelated. The patch series from Nuvoton's Jacky Huang had to go through many revisisions to get to this point and is still missing a few drivers including the serial port for the moment. The branch contains the devicetree files as well as all the code changes, in order to have something that can be tested standalone" * tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) clk: nuvoton: Use clk_parent_data instead of string for parent clock clk: nuvoton: Update all constant hex values to lowercase clk: nuvoton: Add clk-ma35d1.h for driver extern functions remoteproc: stm32: use correct format strings on 64-bit MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE arm64: defconfig: enable ARCH_STM32 and STM32 serial driver arm64: dts: st: add stm32mp257f-ev1 board support dt-bindings: stm32: document stm32mp257f-ev1 board arm64: dts: st: introduce stm32mp25 pinctrl files arm64: dts: st: introduce stm32mp25 SoCs family arm64: introduce STM32 family on Armv8 architecture dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon pinctrl: stm32: add stm32mp257 pinctrl support dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packages Documentation/process: add soc maintainer handbook reset: RESET_NUVOTON_MA35D1 should depend on ARCH_MA35 reset: Add Nuvoton ma35d1 reset driver support clk: nuvoton: Add clock driver for ma35d1 clock controller arm64: dts: nuvoton: Add initial ma35d1 device tree dt-bindings: serial: Document ma35d1 uart controller ... |
||
|
Linus Torvalds
|
6c1561fb90 |
ARM: SoC devicetree updates for 6.5
The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for each
SoC vendor, following the same scheme that is used on arm64, mips and
riscv. This has been discussed for many years, but so far we never did
this as there was a plan to move the files out of the kernel entirely,
which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along
with their device drivers.
* The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the time.
* Amlogic C3 is a Cortex-A35 based smart IP camera chip
* Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
* Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
* Qualcomm SDX75 is the latest generation modem chip that is used
as a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
* Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the Xuantie
C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those included
there are 39 new board files, but only five more 32-bit this time, probably
a new low:
* Marantec Maveo board based on dhcor imx6ull module
* Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
* Epson Moverio BT-200 AR glasses based on TI OMAP4
* PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
* ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than
we had in the recent releases:
* Three boards based on NXP i.MX8: Emtop SoM & Baseboard,
NXP i.MX8MM EVKB board and i.MX8MP based Gateworks Venice
gw7905-2x device.
* NVIDIA IGX Orin and Jetson Orin Nano boards, both based on
tegra234
* Qualcomm gains support for 6 reference boards on various members
of their IPQ networking SoC series, as well as the Sony Xperia M4
Aqua phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board
on top of the various reference platforms for their new chips.
* Rockchips support for several newer boards: Indiedroid Nova (rk3588),
Edgeble Neural Compute Module 6B (rk3588), FriendlyARM NanoPi R2C
Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn Fastrhino R66S/R68S
(rk3568)
* TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex Verdin
family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
* continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
* support for devicetree overlays on at91, bcm283x
* significant additions to existing SoC support on mediatek, qualcomm,
ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST STM32MP1
As usual, a lot more detail is available in the individual merge
commits.
-----BEGIN PGP SIGNATURE-----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=X/KE
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for
each SoC vendor, following the same scheme that is used on arm64, mips
and riscv. This has been discussed for many years, but so far we never
did this as there was a plan to move the files out of the kernel
entirely, which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along with
their device drivers.
- The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the
time.
- Amlogic C3 is a Cortex-A35 based smart IP camera chip
- Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
- Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
- Qualcomm SDX75 is the latest generation modem chip that is used as
a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
- Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
Xuantie C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those
included there are 39 new board files, but only five more 32-bit this
time, probably a new low:
- Marantec Maveo board based on dhcor imx6ull module
- Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
- Epson Moverio BT-200 AR glasses based on TI OMAP4
- PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
- ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than we had
in the recent releases:
- Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.
- NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234
- Qualcomm gains support for 6 reference boards on various members of
their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
of the various reference platforms for their new chips.
- Rockchips support for several newer boards: Indiedroid Nova
(rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
Fastrhino R66S/R68S (rk3568)
- TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
Verdin family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
- continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
- support for devicetree overlays on at91, bcm283x
- significant additions to existing SoC support on mediatek,
qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
STM32MP1
As usual, a lot more detail is available in the individual merge
commits"
* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
ARM: mvebu: fix unit address on armada-390-db flash
ARM: dts: Move .dts files to vendor sub-directories
kbuild: Support flat DTBs install
ARM: dts: Add .dts files missing from the build
ARM: dts: allwinner: Use quoted #include
ARM: dts: lan966x: kontron-d10: add PHY interrupts
ARM: dts: lan966x: kontron-d10: fix SPI CS
ARM: dts: lan966x: kontron-d10: fix board reset
ARM: dts: at91: Enable device-tree overlay support for AT91 boards
arm: dts: Enable device-tree overlay support for AT91 boards
arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
ARM: dts: at91: use generic name for shutdown controller
ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
dt-bindings: firmware: brcm,kona-smc: convert to YAML
riscv: dts: sort makefile entries by directory
riscv: defconfig: enable T-HEAD SoC
MAINTAINERS: add entry for T-HEAD RISC-V SoC
riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
riscv: dts: add initial T-HEAD TH1520 SoC device tree
riscv: Add the T-HEAD SoC family Kconfig option
...
|
||
|
Linus Torvalds
|
b775d6c585 |
- added support for TP-Link HC220 G5 v1
- added support for Wifi/Bluetooth on CI20
- reworked Ralink clock and reset handling
- cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=z9/q
-----END PGP SIGNATURE-----
Merge tag 'mips_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- add support for TP-Link HC220 G5 v1
- add support for Wifi/Bluetooth on CI20
- rework Ralink clock and reset handling
- cleanups and fixes
* tag 'mips_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (58 commits)
MIPS: Loongson64: DTS: Add RTC support to Loongson-2K1000
MIPS: Loongson64: DTS: Add RTC support to LS7A PCH
MIPS: OCTEON: octeon-usb: cleanup divider calculation
MIPS: OCTEON: octeon-usb: introduce dwc3_octeon_{read,write}q
MIPS: OCTEON: octeon-usb: move gpio config to separate function
MIPS: OCTEON: octeon-usb: use bitfields for shim register
MIPS: OCTEON: octeon-usb: use bitfields for host config register
MIPS: OCTEON: octeon-usb: use bitfields for control register
MIPS: OCTEON: octeon-usb: add all register offsets
mips: ralink: match all supported system controller compatible strings
MIPS: dec: prom: Address -Warray-bounds warning
MIPS: DTS: CI20: Raise VDDCORE voltage to 1.125 volts
clk: ralink: mtmips: Fix uninitialized use of ret in mtmips_register_{fixed,factor}_clocks()
mips: ralink: introduce commonly used remap node function
mips: pci-mt7620: use dev_info() to log PCIe device detection result
mips: pci-mt7620: do not print NFTS register value as error log
MAINTAINERS: add Mediatek MTMIPS Clock maintainer
mips: ralink: get cpu rate from new driver code
mips: ralink: remove reset related code
mips: ralink: mt7620: remove clock related code
...
|
||
|
Linus Torvalds
|
18f38fedfa |
Devicetree updates for v6.5:
Bindings:
- Add some missing type definitions to properties
- Drop unneeded quotes and use absolute paths in bindings
- Remove redundant "binding" or "schema" in binding titles
- Add bindings for Ralink SoCs interrupt controller, QCA2066 Bluetooth,
infineon,irps5401, new NXP i.MX GPT variants, shineworld lh133k MIPI
SPI panel, Socionext Synquacer platforms, RK3588 PCIe, ST M95640
EEPROM, and FSL DCP crypto variants, and Arm Cortex-R52
DT core:
- Improve the reserved-memory range allocation to maximize contiguous
space
- Use device_set_node() helper in place of open coding
-----BEGIN PGP SIGNATURE-----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=onek
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Add some missing type definitions to properties
- Drop unneeded quotes and use absolute paths in bindings
- Remove redundant "binding" or "schema" in binding titles
- Add bindings for Ralink SoCs interrupt controller, QCA2066
Bluetooth, infineon,irps5401, new NXP i.MX GPT variants, shineworld
lh133k MIPI SPI panel, Socionext Synquacer platforms, RK3588 PCIe,
ST M95640 EEPROM, and FSL DCP crypto variants, and Arm Cortex-R52
DT core:
- Improve the reserved-memory range allocation to maximize contiguous
space
- Use device_set_node() helper in place of open coding"
* tag 'devicetree-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (40 commits)
dt-bindings: interrupt-controller: add Ralink SoCs interrupt controller
dt-bindings: PCI: dwc: rockchip: Update for RK3588
dt-bindings: auxdisplay: holtek: Add missing type for "linux,no-autorepeat"
dt-bindings: input: mediatek,pmic-keys: Fix typo in "linux,keycodes" property name
dt-bindings: pwm: drop unneeded quotes
dt-bindings: crypto: drop unneeded quotes
dt-bindings: arm: socionext: add Synquacer platforms
dt-bindings: connector: usb: allow a single HS port
dt-bindings: bus: ti-sysc: fix typo
of: reserved_mem: Use stable allocation order
of: reserved_mem: Try to keep range allocations contiguous
dt-bindings: arm: drop unneeded quotes and use absolute /schemas path
dt-bindings: firmware: arm,scmi: drop unneeded quotes and use absolute /schemas path
dt-bindings: dvfs: drop unneeded quotes
dt-bindings: gpu: drop unneeded quotes
dt-bindings: i3c: silvaco,i3c-master: drop unneeded quotes
dt-bindings: rockchip: grf: drop unneeded quotes
dt-bindings: spmi: mtk,spmi-mtk-pmif: drop unneeded quotes
dt-bindings: Remove last usage of "binding" or "schema" in titles
dt-bindings: display: panel: mipi-dbi-spi: add spi-3wire property
...
|
||
|
Linus Torvalds
|
1b722407a1 |
drm changes for 6.5-rc1:
core:
- replace strlcpy with strscpy
- EDID changes to support further conversion to struct drm_edid
- Move i915 DSC parameter code to common DRM helpers
- Add Colorspace functionality
aperture:
- ignore framebuffers with non-primary devices
fbdev:
- use fbdev i/o helpers
- add Kconfig options for fb_ops helpers
- use new fb io helpers directly in drivers
sysfs:
- export DRM connector ID
scheduler:
- Avoid an infinite loop
ttm:
- store function table in .rodata
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
bridge:
- fsl-ldb: support i.MX6SX
- lt9211, lt9611: remove blanking packets
- tc358768: implement input bus formats, devm cleanups
- ti-snd65dsi86: implement wait_hpd_asserted
- analogix: fix endless probe loop
- samsung-dsim: support swapped clock, fix enabling, support var clock
- display-connector: Add support for external power supply
- imx: Fix module linking
- tc358762: Support reset GPIO
panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- InnoLux G070ACE-L01 support
- boe-tv101wum-nl6: Improve initialization
- sharp-ls043t1le001: Mode fixes
- simple: BOE EV121WXM-N10-1850, S6D7AA0
- Ampire AM-800480L1TMQW-T00H
- Rocktech RK043FN48H
- Starry himax83102-j02
- Starry ili9882t
amdgpu:
- add new ctx query flag to handle reset better
- add new query/set shadow buffer for rdna3
- DCN 3.2/3.1.x/3.0.x updates
- Enable DC_FP on loongarch
- PCIe fix for RDNA2
- improve DC FAMS/SubVP support for better power management
- partition support for lots of engines
- Take NUMA into account when allocating memory
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- Initial SMU13 overdrive support
- Add support for new colorspace KMS API
- W=1 fixes
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
- Add debugger interface for enabling gdb
- Add KFD event age tracking
radeon:
- Fix possible UAF
i915:
- new getparam for PXP support
- GSC/MEI proxy driver
- Meteorlake display enablement
- avoid clearing preallocated framebuffers with TTM
- implement framebuffer mmap support
- Disable sampler indirect state in bindless heap
- Enable fdinfo for GuC backends
- GuC loading and firmware table handling fixes
- Various refactors for multi-tile enablement
- Define MOCS and PAT tables for MTL
- GSC/MEI support for Meteorlake
- PMU multi-tile support
- Large driver kernel doc cleanup
- Allow VRR toggling and arbitrary refresh rates
- Support async flips on linear buffers on display ver 12+
- Expose CRTC CTM property on ILK/SNB/VLV
- New debugfs for display clock frequencies
- Hotplug refactoring
- Display refactoring
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
- Use large rings for compute contexts
- HuC loading for MTL
- Allow user to set cache at BO creation
- MTL powermanagement enhancements
- Switch to dedicated workqueues to stop using flush_scheduled_work()
- Move display runtime init under display/
- Remove 10bit gamma on desktop gen3 parts, they don't support it
habanalabs:
- uapi: return 0 for user queries if there was a h/w or f/w error
- Add pci health check when we lose connection with the firmware. This can be used to
distinguish between pci link down and firmware getting stuck.
- Add more info to the error print when TPC interrupt occur.
- Firmware fixes
msm:
- Adreno A660 bindings
- SM8350 MDSS bindings fix
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x, sc8280xp, sm8450
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Added support for display controller on MSM8226 platform
- A690 GPU support
- Move cmdstream dumping out of fence signaling path
- a610 support
- Support for a6xx devices without GMU
nouveau:
- NULL ptr before deref fixes
armada:
- implement fbdev emulation as client
sun4i:
- fix mipi-dsi dotclock
- release clocks
vc4:
- rgb range toggle property
- BT601 / BT2020 HDMI support
vkms:
- convert to drmm helpers
- add reflection and rotation support
- fix rgb565 conversion
gma500:
- fix iomem access
shmobile:
- support renesas soc platform
- enable fbdev
mxsfb:
- Add support for i.MX93 LCDIF
stm:
- dsi: Use devm_ helper
- ltdc: Fix potential invalid pointer deref
renesas:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
meson:
- Add support for MIPI DSI displays
virtio:
- add sync object support
mediatek:
- Add display binding document for MT6795
-----BEGIN PGP SIGNATURE-----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=FmUA
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"There is one set of patches to misc for a i915 gsc/mei proxy driver.
Otherwise it's mostly amdgpu/i915/msm, lots of hw enablement and lots
of refactoring.
core:
- replace strlcpy with strscpy
- EDID changes to support further conversion to struct drm_edid
- Move i915 DSC parameter code to common DRM helpers
- Add Colorspace functionality
aperture:
- ignore framebuffers with non-primary devices
fbdev:
- use fbdev i/o helpers
- add Kconfig options for fb_ops helpers
- use new fb io helpers directly in drivers
sysfs:
- export DRM connector ID
scheduler:
- Avoid an infinite loop
ttm:
- store function table in .rodata
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
bridge:
- fsl-ldb: support i.MX6SX
- lt9211, lt9611: remove blanking packets
- tc358768: implement input bus formats, devm cleanups
- ti-snd65dsi86: implement wait_hpd_asserted
- analogix: fix endless probe loop
- samsung-dsim: support swapped clock, fix enabling, support var
clock
- display-connector: Add support for external power supply
- imx: Fix module linking
- tc358762: Support reset GPIO
panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- InnoLux G070ACE-L01 support
- boe-tv101wum-nl6: Improve initialization
- sharp-ls043t1le001: Mode fixes
- simple: BOE EV121WXM-N10-1850, S6D7AA0
- Ampire AM-800480L1TMQW-T00H
- Rocktech RK043FN48H
- Starry himax83102-j02
- Starry ili9882t
amdgpu:
- add new ctx query flag to handle reset better
- add new query/set shadow buffer for rdna3
- DCN 3.2/3.1.x/3.0.x updates
- Enable DC_FP on loongarch
- PCIe fix for RDNA2
- improve DC FAMS/SubVP support for better power management
- partition support for lots of engines
- Take NUMA into account when allocating memory
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- Initial SMU13 overdrive support
- Add support for new colorspace KMS API
- W=1 fixes
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
- Add debugger interface for enabling gdb
- Add KFD event age tracking
radeon:
- Fix possible UAF
i915:
- new getparam for PXP support
- GSC/MEI proxy driver
- Meteorlake display enablement
- avoid clearing preallocated framebuffers with TTM
- implement framebuffer mmap support
- Disable sampler indirect state in bindless heap
- Enable fdinfo for GuC backends
- GuC loading and firmware table handling fixes
- Various refactors for multi-tile enablement
- Define MOCS and PAT tables for MTL
- GSC/MEI support for Meteorlake
- PMU multi-tile support
- Large driver kernel doc cleanup
- Allow VRR toggling and arbitrary refresh rates
- Support async flips on linear buffers on display ver 12+
- Expose CRTC CTM property on ILK/SNB/VLV
- New debugfs for display clock frequencies
- Hotplug refactoring
- Display refactoring
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
- Use large rings for compute contexts
- HuC loading for MTL
- Allow user to set cache at BO creation
- MTL powermanagement enhancements
- Switch to dedicated workqueues to stop using flush_scheduled_work()
- Move display runtime init under display/
- Remove 10bit gamma on desktop gen3 parts, they don't support it
habanalabs:
- uapi: return 0 for user queries if there was a h/w or f/w error
- Add pci health check when we lose connection with the firmware.
This can be used to distinguish between pci link down and firmware
getting stuck.
- Add more info to the error print when TPC interrupt occur.
- Firmware fixes
msm:
- Adreno A660 bindings
- SM8350 MDSS bindings fix
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer
platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x,
sc8280xp, sm8450
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Added support for display controller on MSM8226 platform
- A690 GPU support
- Move cmdstream dumping out of fence signaling path
- a610 support
- Support for a6xx devices without GMU
nouveau:
- NULL ptr before deref fixes
armada:
- implement fbdev emulation as client
sun4i:
- fix mipi-dsi dotclock
- release clocks
vc4:
- rgb range toggle property
- BT601 / BT2020 HDMI support
vkms:
- convert to drmm helpers
- add reflection and rotation support
- fix rgb565 conversion
gma500:
- fix iomem access
shmobile:
- support renesas soc platform
- enable fbdev
mxsfb:
- Add support for i.MX93 LCDIF
stm:
- dsi: Use devm_ helper
- ltdc: Fix potential invalid pointer deref
renesas:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
meson:
- Add support for MIPI DSI displays
virtio:
- add sync object support
mediatek:
- Add display binding document for MT6795"
* tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm: (1791 commits)
drm/i915: Fix a NULL vs IS_ERR() bug
drm/i915: make i915_drm_client_fdinfo() reference conditional again
drm/i915/huc: Fix missing error code in intel_huc_init()
drm/i915/gsc: take a wakeref for the proxy-init-completion check
drm/msm/a6xx: Add A610 speedbin support
drm/msm/a6xx: Add A619_holi speedbin support
drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching
drm/msm/a6xx: Use "else if" in GPU speedbin rev matching
drm/msm/a6xx: Fix some A619 tunables
drm/msm/a6xx: Add A610 support
drm/msm/a6xx: Add support for A619_holi
drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations
drm/msm/a6xx: Introduce GMU wrapper support
drm/msm/a6xx: Move CX GMU power counter enablement to hw_init
drm/msm/a6xx: Extend and explain UBWC config
drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init
drm/msm/a6xx: Add a helper for software-resetting the GPU
drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()
drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu
drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()
...
|
||
|
Linus Torvalds
|
f8824e151f |
sound updates for 6.5-rc1
Lots of changes as usual, but the only significant stuff in ALSA core
part is the MIDI 2.0 support, while ASoC core kept receiving the code
refactoring. The majority of changes are seen rather in device
drivers, and quite a few new drivers can be found there.
Here we go, some highlights:
ALSA and ASoC Core:
- Support of MIDI 2.0 devices: rawmidi and sequencer API have been
extended for the support of the new UMP (Universal MIDI Packet)
protocol, USB audio driver got the USB MIDI 2.0 interface support
- Continued refactoring around ASoC DAI links and the ordering of
trigger callbacks
- PCM ABI extension for better drain support
ASoC Drivers:
- Conversions of many drivers to use maple tree based caches
- Everlasting improvement works on ASoC Intel drivers
- Compressed audio support for Qualcomm
- Support for AMD SoundWire, Analog Devices SSM3515, Google Chameleon,
Ingenic X1000, Intel systems with various CODECs, Loongson
platforms, Maxim MAX98388, Mediatek MT8188, Nuvoton NAU8825C, NXP
platforms with NAU8822, Qualcomm WSA884x, StarFive JH7110, Texas
Instruments TAS2781
HD-audio:
- Quirks for HP and ASUS machines
- CS35L41 HD-audio codec fixes
- Loongson HD-audio support
Misc:
- A new virtual PCM test driver for kselftests
- Continued refactoring and improvements on the legacy emu10k1 driver
-----BEGIN PGP SIGNATURE-----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=GuXv
-----END PGP SIGNATURE-----
Merge tag 'sound-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of changes as usual, but the only significant stuff in ALSA core
part is the MIDI 2.0 support, while ASoC core kept receiving the code
refactoring. The majority of changes are seen rather in device
drivers, and quite a few new drivers can be found there.
Here we go, some highlights:
ALSA and ASoC Core:
- Support of MIDI 2.0 devices: rawmidi and sequencer API have been
extended for the support of the new UMP (Universal MIDI Packet)
protocol, USB audio driver got the USB MIDI 2.0 interface support
- Continued refactoring around ASoC DAI links and the ordering of
trigger callbacks
- PCM ABI extension for better drain support
ASoC Drivers:
- Conversions of many drivers to use maple tree based caches
- Everlasting improvement works on ASoC Intel drivers
- Compressed audio support for Qualcomm
- Support for AMD SoundWire, Analog Devices SSM3515, Google
Chameleon, Ingenic X1000, Intel systems with various CODECs,
Loongson platforms, Maxim MAX98388, Mediatek MT8188, Nuvoton
NAU8825C, NXP platforms with NAU8822, Qualcomm WSA884x, StarFive
JH7110, Texas Instruments TAS2781
HD-audio:
- Quirks for HP and ASUS machines
- CS35L41 HD-audio codec fixes
- Loongson HD-audio support
Misc:
- A new virtual PCM test driver for kselftests
- Continued refactoring and improvements on the legacy emu10k1
driver"
* tag 'sound-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (556 commits)
ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on EliteBook
ASoC: hdmi-codec: fix channel info for compressed formats
ALSA: pcm: fix ELD constraints for (E)AC3, DTS(-HD) and MLP formats
ASoC: core: Always store of_node when getting DAI link component
ASoC: tas2781: Fix error code in tas2781_load_calibration()
ASoC: amd: update pm_runtime enable sequence
ALSA: ump: Export MIDI1 / UMP conversion helpers
ASoC: tas2781: fix Kconfig dependencies
ASoC: amd: acp: remove acp poweroff function
ASoC: amd: acp: clear pdm dma interrupt mask
ASoC: codecs: max98090: Allow dsp_a mode
ASoC: qcom: common: add default jack dapm pins
ASoC: loongson: fix address space confusion
ASoC: dt-bindings: microchip,sama7g5-pdmc: Simplify "microchip,mic-pos" constraints
ASoC: tegra: Remove stale comments in AHUB
ASoC: tegra: Use normal system sleep for ASRC
ALSA: hda/realtek: Add quirks for ROG ALLY CS35l41 audio
ASoC: fsl-asoc-card: Allow passing the number of slots in use
ASoC: codecs: wsa884x: Add WSA884x family of speakers
ASoC: dt-bindings: qcom,wsa8840: Add WSA884x family of speakers
...
|
||
|
Linus Torvalds
|
86e203edf2 |
Input updates for 6.5 merge window:
- improvements to PS/2 handling for case when EC has already latched a scancode in the data register, but the kernel expects to receive an ACK to a command it sent to a device (such as keyboard LED toggle) - input drivers for devices connected over I2C bus have been switched back to using [new] .probe() - uinput allows userspace to inject timestamps for input events - support for capacitive keys in Atmel touch controller driver - assorted fixes to drv260x, pwm-vibra, ili210x, adxl34x, and other drivers. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZJtgIgAKCRBAj56VGEWX nKjaAP9lj2QkBfMssBAXVM2RIpXpsBcx+Z2kxZ3sFIUD+Cah7gEAuypzoVHw+n6+ yLMiwEbHWt8514CK0wnsea1UVFW87AY= =lbD/ -----END PGP SIGNATURE----- Merge tag 'input-for-v6.5-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - improvements to PS/2 handling for case when EC has already latched a scancode in the data register, but the kernel expects to receive an ACK to a command it sent to a device (such as keyboard LED toggle) - input drivers for devices connected over I2C bus have been switched back to using [new] .probe() - uinput allows userspace to inject timestamps for input events - support for capacitive keys in Atmel touch controller driver - assorted fixes to drv260x, pwm-vibra, ili210x, adxl34x, and other drivers * tag 'input-for-v6.5-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits) Input: pm8941-powerkey - fix debounce on gen2+ PMICs MAINTAINERS: Adjust Qualcomm driver globbing Input: gameport - provide default trigger() and read() Input: tps65219-pwrbutton - use regmap_set_bits() Input: tps65219-pwrbutton - convert to .remove_new() Input: tests - add test to cover all input_grab_device() function Input: gpio-keys - use input_report_key() Input: xpad - spelling fixes for "Xbox" Input: add HAS_IOPORT dependencies Input: libps2 - do not discard non-ack bytes when controlling LEDs Input: libps2 - introduce common interrupt handler Input: libps2 - fix aborting PS/2 commands Input: libps2 - fix NAK handling Input: libps2 - rework handling of command response Input: libps2 - remove special handling of ACK for command byte Input: libps2 - attach ps2dev instances as serio port's drvdata Input: Switch i2c drivers back to use .probe() dt-bindings: input: cypress,cyapa: convert to dtschema Input: adxl34x - do not hardcode interrupt trigger type Input: pwm-vibra - add support for enable GPIO ... |
||
|
Linus Torvalds
|
0e382fa72b |
for-linus-2023062701
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIVAwUAZJtLRKZi849r7WBJAQIMXQ/+KULDCg9ipbPeYSGbEbZLCfuZyqqM77/C zRRBlwk2mAE63j2wNzu70f707W2cfm2njGtbGHhJBETr3lZeP4JTNSBspwnWpjLs naMj82f9wrmEn8lDc5PYicltZVtJWN6liqo/KQ4wIs84WU1TgU89xMhm1iuaGTOu dSXzFHBPiss9CgxUUQJ7gbbe2ZFu/bW0MNWd2a1Fd4g0Uz38yioCDTB4L+zseklA WtA4R8ZZVXzPs3k/VJk7CfyU9gJnBppkEg2ZsNu55R/h2etIdAI/BI/DgQFcCdHw 4F0h32sGbTN8tOqmXq0LyJ9cUOeI2lSTxyE0lt2gRLD/Cdmm/ViPxoyzrhFb+GZO 9d/8GjPjumd5dukMmlw4P5aToD/zbeBk+oZuAYIwYMNLfKGrNRW3NgjRIvN7Lafv XhfMZSQ3Nkjl+ckdZB6XxkczBRbYSMFpReGxAOWowyEzJCfXf50oPTne0uRU6dce lLWmtNXf+5CbfDZClZ/qbR3cwN1yk4DoL1i6znASJom6X6AJ4q6A3/202YJC/0NR Z/DDyaFZZBrMLhIwNTj5bxqfJ+I6CWiuvKKWYVtM0cIwCu+9d1TgIISKOT0r/j6c OqSYiGnUbnwKftXxNpIuKgQ/g6/m47uqOdpkKQyd8aUS/GCriB/31a9ItdI7cU8r 8Y73DkPjPT0= =gUhj -----END PGP SIGNATURE----- Merge tag 'for-linus-2023062701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - more bullet-proof handling of devres-managed resources in HID core (Dmitry Torokhov) - conversion of hid-wacom to use ktime_t (Jason Gerecke) - touch selftests for hid-wacom (Joshua Dickens) - support for nVidia Thunderstrike (SHIELD 2017) controller (Rahul Rameshbabu) - power management reset-during-suspend fix for goodix Chromebook devices (Fei Shao) - assorted device ID additions, device-specific quirks and code cleanups * tag 'for-linus-2023062701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (27 commits) HID: wacom: Use ktime_t rather than int when dealing with timestamps HID: hidraw: fix data race on device refcount HID: intel-ish-hid: ipc: Add Arrow Lake PCI device ID HID: logitech-hidpp: add HIDPP_QUIRK_DELAYED_INIT for the T651. HID: add quirk for 03f0:464a HP Elite Presenter Mouse HID: nvidia-shield: Support LED functionality for Thunderstrike HID: nvidia-shield: Add mappings for consumer HID USAGE buttons HID: nvidia-shield: Initial driver implementation with Thunderstrike support HID: apple: Option to swap only left side mod keys HID: uclogic: Modular KUnit tests should not depend on KUNIT=y HID: fix an error code in hid_check_device_match() HID: logitech-hidpp: Add USB and Bluetooth IDs for the Logitech G915 TKL Keyboard HID: i2c-hid: Switch i2c drivers back to use .probe() HID: i2c-hid: goodix: Add support for "goodix,no-reset-during-suspend" property dt-bindings: input: goodix: Add "goodix,no-reset-during-suspend" property HID: microsoft: Add rumble support to latest xbox controllers selftests: hid: Add touch tests for Wacom devices HID: ensure timely release of driver-allocated resources HID: split apart hid_device_probe to make logic more apparent HID: amd_sfh: Split sensor and HID initialization for SFH1.1 ... |
||
|
Linus Torvalds
|
e5476f57b3 |
gpio updates for v6.5
Core GPIO library:
- remove unused symbols
- don't spam the kernel log with messages about hogs
- remove old sysfs API cruft
- improve handling of GPIO masks
New drivers
- add a driver for the BlueField-3 GPIO controller
- add GPIO support for the TPS65219 PMIC
Driver improvements:
- extend the gpio-aggregator driver to support ramp-up/ramp-down delay
- remove unnecessary CONFIG_OF guards from gpio-aggregator
- readability improvements in gpio-tangier
- switch i2c drivers back to using probe() now that it's been converted in
the i2c subsystem to not taking the id parameter
- remove unused inclusions of of_gpio.h in several drivers
- make pm ops static in gpio-davinci and fix a comment
- use more devres in drivers to shrink and simplify the code
- add missing include in gpio-sa1100
- add HAS_IOPORT KConfig dependency where needed
- add permissions checks before accessing pins in gpio-tegra186
- convert the gpio-zynq driver to using immutable irqchips
- preserve output settings set by the bootloader in gpio-mpc8xxx
Selftests:
- tweak the variable naming in script tests
Device tree updates:
- convert gpio-mmio and gpio-stmpe to YAML
- add parsing of GPIO hogs to gpio-vf610
- add bindings for the Cirrus EP93xx GPIO controller
- add gpio-line-names property to the gpio-pca9570 bindings
- extend the binding for x-powers,axp209 with another block
-----BEGIN PGP SIGNATURE-----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=3KNJ
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have two new drivers, some improvements to the core code, lots of
different updates to existing GPIO drivers and some dt-bindings on
top.
There's nothing controversial in here and almost everything has been
in next for more than a week (95% a lot longer than this). The only
thing that has spent less time in next is a new driver so no risk of
regressions.
The single merge pulls in changes that remove all usage of global GPIO
numbers from arch/arm/mach-omap.
Core GPIO library:
- remove unused symbols
- don't spam the kernel log with messages about hogs
- remove old sysfs API cruft
- improve handling of GPIO masks
New drivers:
- add a driver for the BlueField-3 GPIO controller
- add GPIO support for the TPS65219 PMIC
Driver improvements:
- extend the gpio-aggregator driver to support ramp-up/ramp-down
delay
- remove unnecessary CONFIG_OF guards from gpio-aggregator
- readability improvements in gpio-tangier
- switch i2c drivers back to using probe() now that it's been
converted in the i2c subsystem to not taking the id parameter
- remove unused inclusions of of_gpio.h in several drivers
- make pm ops static in gpio-davinci and fix a comment
- use more devres in drivers to shrink and simplify the code
- add missing include in gpio-sa1100
- add HAS_IOPORT KConfig dependency where needed
- add permissions checks before accessing pins in gpio-tegra186
- convert the gpio-zynq driver to using immutable irqchips
- preserve output settings set by the bootloader in gpio-mpc8xxx
Selftests:
- tweak the variable naming in script tests
Device tree updates:
- convert gpio-mmio and gpio-stmpe to YAML
- add parsing of GPIO hogs to gpio-vf610
- add bindings for the Cirrus EP93xx GPIO controller
- add gpio-line-names property to the gpio-pca9570 bindings
- extend the binding for x-powers,axp209 with another block"
* tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (58 commits)
of: unittest: drop assertions for GPIO hog messages
gpiolib: Drop unused domain_ops memeber of GPIO IRQ chip
gpio: synq: remove unused zynq_gpio_irq_reqres/zynq_gpio_irq_relres
dt-bindings: gpio: gpio-vf610: Add parsing of hogs
gpio: lpc18xx: Remove unused of_gpio.h inclusion
gpio: xra1403: Remove unused of_gpio.h inclusion
gpio: mpc8xxx: Remove unused of_gpio.h inclusion
dt-bindings: gpio: Add Cirrus EP93xx
gpio: mpc8xxx: latch GPIOs state on module load when configured as output
selftests: gpio: gpio-sim: Use same variable name for sysfs pathname
gpio: mlxbf3: Add gpio driver support
gpio: delay: Remove duplicative functionality
gpio: aggregator: Set up a parser of delay line parameters
gpio: aggregator: Support delay for setting up individual GPIOs
gpio: aggregator: Remove CONFIG_OF and of_match_ptr() protections
dt-bindings: gpio: pca9570: add gpio-line-names property
gpiolib: remove unused gpio_cansleep()
gpio: tps65219: add GPIO support for TPS65219 PMIC
gpio: zynq: fix zynqmp_gpio not an immutable chip warning
gpio: davinci: make davinci_gpio_dev_pm_ops static
...
|