mirror of
https://github.com/torvalds/linux.git
synced 2024-11-25 13:41:51 +00:00
158f238aa6
1325 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Hugh Dickins
|
f8f931bba0 |
mm/thp: fix deferred split unqueue naming and locking
Recent changes are putting more pressure on THP deferred split queues: under load revealing long-standing races, causing list_del corruptions, "Bad page state"s and worse (I keep BUGs in both of those, so usually don't get to see how badly they end up without). The relevant recent changes being 6.8's mTHP, 6.10's mTHP swapout, and 6.12's mTHP swapin, improved swap allocation, and underused THP splitting. Before fixing locking: rename misleading folio_undo_large_rmappable(), which does not undo large_rmappable, to folio_unqueue_deferred_split(), which is what it does. But that and its out-of-line __callee are mm internals of very limited usability: add comment and WARN_ON_ONCEs to check usage; and return a bool to say if a deferred split was unqueued, which can then be used in WARN_ON_ONCEs around safety checks (sparing callers the arcane conditionals in __folio_unqueue_deferred_split()). Just omit the folio_unqueue_deferred_split() from free_unref_folios(), all of whose callers now call it beforehand (and if any forget then bad_page() will tell) - except for its caller put_pages_list(), which itself no longer has any callers (and will be deleted separately). Swapout: mem_cgroup_swapout() has been resetting folio->memcg_data 0 without checking and unqueueing a THP folio from deferred split list; which is unfortunate, since the split_queue_lock depends on the memcg (when memcg is enabled); so swapout has been unqueueing such THPs later, when freeing the folio, using the pgdat's lock instead: potentially corrupting the memcg's list. __remove_mapping() has frozen refcount to 0 here, so no problem with calling folio_unqueue_deferred_split() before resetting memcg_data. That goes back to 5.4 commit |
||
Yu Zhao
|
1d4832becd |
mm: multi-gen LRU: use {ptep,pmdp}_clear_young_notify()
When the MM_WALK capability is enabled, memory that is mostly accessed by
a VM appears younger than it really is, therefore this memory will be less
likely to be evicted. Therefore, the presence of a running VM can
significantly increase swap-outs for non-VM memory, regressing the
performance for the rest of the system.
Fix this regression by always calling {ptep,pmdp}_clear_young_notify()
whenever we clear the young bits on PMDs/PTEs.
[jthoughton@google.com: fix link-time error]
Link: https://lkml.kernel.org/r/20241019012940.3656292-3-jthoughton@google.com
Fixes:
|
||
|
Yu Zhao
|
ddd6d8e975 |
mm: multi-gen LRU: remove MM_LEAF_OLD and MM_NONLEAF_TOTAL stats
Patch series "mm: multi-gen LRU: Have secondary MMUs participate in
MM_WALK".
Today, the MM_WALK capability causes MGLRU to clear the young bit from
PMDs and PTEs during the page table walk before eviction, but MGLRU does
not call the clear_young() MMU notifier in this case. By not calling this
notifier, the MM walk takes less time/CPU, but it causes pages that are
accessed mostly through KVM / secondary MMUs to appear younger than they
should be.
We do call the clear_young() notifier today, but only when attempting to
evict the page, so we end up clearing young/accessed information less
frequently for secondary MMUs than for mm PTEs, and therefore they appear
younger and are less likely to be evicted. Therefore, memory that is
*not* being accessed mostly by KVM will be evicted *more* frequently,
worsening performance.
ChromeOS observed a tab-open latency regression when enabling MGLRU with a
setup that involved running a VM:
Tab-open latency histogram (ms)
Version p50 mean p95 p99 max
base 1315 1198 2347 3454 10319
mglru 2559 1311 7399 12060 43758
fix 1119 926 2470 4211 6947
This series replaces the final non-selftest patchs from this series[1],
which introduced a similar change (and a new MMU notifier) with KVM
optimizations. I'll send a separate series (to Sean and Paolo) for the
KVM optimizations.
This series also makes proactive reclaim with MGLRU possible for KVM
memory. I have verified that this functions correctly with the selftest
from [1], but given that that test is a KVM selftest, I'll send it with
the rest of the KVM optimizations later. Andrew, let me know if you'd
like to take the test now anyway.
[1]: https://lore.kernel.org/linux-mm/20240926013506.860253-18-jthoughton@google.com/
This patch (of 2):
The removed stats, MM_LEAF_OLD and MM_NONLEAF_TOTAL, are not very helpful
and become more complicated to properly compute when adding
test/clear_young() notifiers in MGLRU's mm walk.
Link: https://lkml.kernel.org/r/20241019012940.3656292-1-jthoughton@google.com
Link: https://lkml.kernel.org/r/20241019012940.3656292-2-jthoughton@google.com
Fixes:
|
||
Wei Xu
|
b130ba4a62 |
mm/mglru: only clear kswapd_failures if reclaimable
lru_gen_shrink_node() unconditionally clears kswapd_failures, which can
prevent kswapd from sleeping and cause 100% kswapd cpu usage even when
kswapd repeatedly fails to make progress in reclaim.
Only clear kswap_failures in lru_gen_shrink_node() if reclaim makes some
progress, similar to shrink_node().
I happened to run into this problem in one of my tests recently. It
requires a combination of several conditions: The allocator needs to
allocate a right amount of pages such that it can wake up kswapd
without itself being OOM killed; there is no memory for kswapd to
reclaim (My test disables swap and cleans page cache first); no other
process frees enough memory at the same time.
Link: https://lkml.kernel.org/r/20241014221211.832591-1-weixugc@google.com
Fixes:
|
||
Linus Torvalds
|
617a814f14 |
ALong with the usual shower of singleton patches, notable patch series in
this pull request are:
"Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
"Some cleanups for shmem" from Baolin Wang. No functional changes - mode
code reuse, better function naming, logic simplifications.
"mm: some small page fault cleanups" from Josef Bacik. No functional
changes - code cleanups only.
"Various memory tiering fixes" from Zi Yan. A small fix and a little
cleanup.
"mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
"Kernel stack usage histogram" from Pasha Tatashin and Shakeel Butt. This
is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at all
used 16k. Useful for some system tuning things, but partivularly useful
for "the dynamic kernel stack project".
"kmemleak: support for percpu memory leak detect" from Pavel Tikhomirov.
Teaches kmemleak to detect leaksage of percpu memory.
"mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
"mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from David
Hildenbrand. Improves PTE/PMD splitlock detection, makes powerpc/8xx work
correctly by design rather than by accident.
"mm: remove arch_make_page_accessible()" from David Hildenbrand. Some
folio conversions which make arch_make_page_accessible() unneeded.
"mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David Finkel.
Cleans up and fixes our handling of the resetting of the cgroup/process
peak-memory-use detector.
"Make core VMA operations internal and testable" from Lorenzo Stoakes.
Rationalizaion and encapsulation of the VMA manipulation APIs. With a
view to better enable testing of the VMA functions, even from a
userspace-only harness.
"mm: zswap: fixes for global shrinker" from Takero Funaki. Fix issues in
the zswap global shrinker, resulting in improved performance.
"mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill in
some missing info in /proc/zoneinfo.
"mm: replace follow_page() by folio_walk" from David Hildenbrand. Code
cleanups and rationalizations (conversion to folio_walk()) resulting in
the removal of follow_page().
"improving dynamic zswap shrinker protection scheme" from Nhat Pham. Some
tuning to improve zswap's dynamic shrinker. Significant reductions in
swapin and improvements in performance are shown.
"mm: Fix several issues with unaccepted memory" from Kirill Shutemov.
Improvements to the new unaccepted memory feature,
"mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on DAX
PUDs. This was missing, although nobody seems to have notied yet.
"Introduce a store type enum for the Maple tree" from Sidhartha Kumar.
Cleanups and modest performance improvements for the maple tree library
code.
"memcg: further decouple v1 code from v2" from Shakeel Butt. Move more
cgroup v1 remnants away from the v2 memcg code.
"memcg: initiate deprecation of v1 features" from Shakeel Butt. Adds
various warnings telling users that memcg v1 features are deprecated.
"mm: swap: mTHP swap allocator base on swap cluster order" from Chris Li.
Greatly improves the success rate of the mTHP swap allocation.
"mm: introduce numa_memblks" from Mike Rapoport. Moves various disparate
per-arch implementations of numa_memblk code into generic code.
"mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
"support large folio swap-out and swap-in for shmem" from Baolin Wang.
With this series we no longer split shmem large folios into simgle-page
folios when swapping out shmem.
"mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice performance
improvements and code reductions for gigantic folios.
"support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
"mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
"Increase the number of bits available in page_type" from Matthew Wilcox.
Increases the number of bits available in page_type!
"Simplify the page flags a little" from Matthew Wilcox. Many legacy page
flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
"mm: store zero pages to be swapped out in a bitmap" from Usama Arif. An
optimization which permits us to avoid writing/reading zero-filled zswap
pages to backing store.
"Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race window
which occurs when a MAP_FIXED operqtion is occurring during an unrelated
vma tree walk.
"mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of the
vma_merge() functionality, making ot cleaner, more testable and better
tested.
"misc fixups for DAMON {self,kunit} tests" from SeongJae Park. Minor
fixups of DAMON selftests and kunit tests.
"mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang. Code
cleanups and folio conversions.
"Shmem mTHP controls and stats improvements" from Ryan Roberts. Cleanups
for shmem controls and stats.
"mm: count the number of anonymous THPs per size" from Barry Song. Expose
additional anon THP stats to userspace for improved tuning.
"mm: finish isolate/putback_lru_page()" from Kefeng Wang: more folio
conversions and removal of now-unused page-based APIs.
"replace per-quota region priorities histogram buffer with per-context
one" from SeongJae Park. DAMON histogram rationalization.
"Docs/damon: update GitHub repo URLs and maintainer-profile" from SeongJae
Park. DAMON documentation updates.
"mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and improve
related doc and warn" from Jason Wang: fixes usage of page allocator
__GFP_NOFAIL and GFP_ATOMIC flags.
"mm: split underused THPs" from Yu Zhao. Improve THP=always policy - this
was overprovisioning THPs in sparsely accessed memory areas.
"zram: introduce custom comp backends API" frm Sergey Senozhatsky. Add
support for zram run-time compression algorithm tuning.
"mm: Care about shadow stack guard gap when getting an unmapped area" from
Mark Brown. Fix up the various arch_get_unmapped_area() implementations
to better respect guard areas.
"Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability of
mem_cgroup_iter() and various code cleanups.
"mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
"resource: Fix region_intersects() vs add_memory_driver_managed()" from
Huang Ying. Fix a bug in region_intersects() for systems with CXL memory.
"mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches a
couple more code paths to correctly recover from the encountering of
poisoned memry.
"mm: enable large folios swap-in support" from Barry Song. Support the
swapin of mTHP memory into appropriately-sized folios, rather than into
single-page folios.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZu1BBwAKCRDdBJ7gKXxA
jlWNAQDYlqQLun7bgsAN4sSvi27VUuWv1q70jlMXTfmjJAvQqwD/fBFVR6IOOiw7
AkDbKWP2k0hWPiNJBGwoqxdHHx09Xgo=
=s0T+
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Along with the usual shower of singleton patches, notable patch series
in this pull request are:
- "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
- "Some cleanups for shmem" from Baolin Wang. No functional changes -
mode code reuse, better function naming, logic simplifications.
- "mm: some small page fault cleanups" from Josef Bacik. No
functional changes - code cleanups only.
- "Various memory tiering fixes" from Zi Yan. A small fix and a
little cleanup.
- "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
- "Kernel stack usage histogram" from Pasha Tatashin and Shakeel
Butt. This is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at
all used 16k. Useful for some system tuning things, but
partivularly useful for "the dynamic kernel stack project".
- "kmemleak: support for percpu memory leak detect" from Pavel
Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory.
- "mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
- "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from
David Hildenbrand. Improves PTE/PMD splitlock detection, makes
powerpc/8xx work correctly by design rather than by accident.
- "mm: remove arch_make_page_accessible()" from David Hildenbrand.
Some folio conversions which make arch_make_page_accessible()
unneeded.
- "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David
Finkel. Cleans up and fixes our handling of the resetting of the
cgroup/process peak-memory-use detector.
- "Make core VMA operations internal and testable" from Lorenzo
Stoakes. Rationalizaion and encapsulation of the VMA manipulation
APIs. With a view to better enable testing of the VMA functions,
even from a userspace-only harness.
- "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix
issues in the zswap global shrinker, resulting in improved
performance.
- "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill
in some missing info in /proc/zoneinfo.
- "mm: replace follow_page() by folio_walk" from David Hildenbrand.
Code cleanups and rationalizations (conversion to folio_walk())
resulting in the removal of follow_page().
- "improving dynamic zswap shrinker protection scheme" from Nhat
Pham. Some tuning to improve zswap's dynamic shrinker. Significant
reductions in swapin and improvements in performance are shown.
- "mm: Fix several issues with unaccepted memory" from Kirill
Shutemov. Improvements to the new unaccepted memory feature,
- "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on
DAX PUDs. This was missing, although nobody seems to have notied
yet.
- "Introduce a store type enum for the Maple tree" from Sidhartha
Kumar. Cleanups and modest performance improvements for the maple
tree library code.
- "memcg: further decouple v1 code from v2" from Shakeel Butt. Move
more cgroup v1 remnants away from the v2 memcg code.
- "memcg: initiate deprecation of v1 features" from Shakeel Butt.
Adds various warnings telling users that memcg v1 features are
deprecated.
- "mm: swap: mTHP swap allocator base on swap cluster order" from
Chris Li. Greatly improves the success rate of the mTHP swap
allocation.
- "mm: introduce numa_memblks" from Mike Rapoport. Moves various
disparate per-arch implementations of numa_memblk code into generic
code.
- "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
- "support large folio swap-out and swap-in for shmem" from Baolin
Wang. With this series we no longer split shmem large folios into
simgle-page folios when swapping out shmem.
- "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice
performance improvements and code reductions for gigantic folios.
- "support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
- "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
- "Increase the number of bits available in page_type" from Matthew
Wilcox. Increases the number of bits available in page_type!
- "Simplify the page flags a little" from Matthew Wilcox. Many legacy
page flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
- "mm: store zero pages to be swapped out in a bitmap" from Usama
Arif. An optimization which permits us to avoid writing/reading
zero-filled zswap pages to backing store.
- "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race
window which occurs when a MAP_FIXED operqtion is occurring during
an unrelated vma tree walk.
- "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of
the vma_merge() functionality, making ot cleaner, more testable and
better tested.
- "misc fixups for DAMON {self,kunit} tests" from SeongJae Park.
Minor fixups of DAMON selftests and kunit tests.
- "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang.
Code cleanups and folio conversions.
- "Shmem mTHP controls and stats improvements" from Ryan Roberts.
Cleanups for shmem controls and stats.
- "mm: count the number of anonymous THPs per size" from Barry Song.
Expose additional anon THP stats to userspace for improved tuning.
- "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more
folio conversions and removal of now-unused page-based APIs.
- "replace per-quota region priorities histogram buffer with
per-context one" from SeongJae Park. DAMON histogram
rationalization.
- "Docs/damon: update GitHub repo URLs and maintainer-profile" from
SeongJae Park. DAMON documentation updates.
- "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and
improve related doc and warn" from Jason Wang: fixes usage of page
allocator __GFP_NOFAIL and GFP_ATOMIC flags.
- "mm: split underused THPs" from Yu Zhao. Improve THP=always policy.
This was overprovisioning THPs in sparsely accessed memory areas.
- "zram: introduce custom comp backends API" frm Sergey Senozhatsky.
Add support for zram run-time compression algorithm tuning.
- "mm: Care about shadow stack guard gap when getting an unmapped
area" from Mark Brown. Fix up the various arch_get_unmapped_area()
implementations to better respect guard areas.
- "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability
of mem_cgroup_iter() and various code cleanups.
- "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
- "resource: Fix region_intersects() vs add_memory_driver_managed()"
from Huang Ying. Fix a bug in region_intersects() for systems with
CXL memory.
- "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches
a couple more code paths to correctly recover from the encountering
of poisoned memry.
- "mm: enable large folios swap-in support" from Barry Song. Support
the swapin of mTHP memory into appropriately-sized folios, rather
than into single-page folios"
* tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits)
zram: free secondary algorithms names
uprobes: turn xol_area->pages[2] into xol_area->page
uprobes: introduce the global struct vm_special_mapping xol_mapping
Revert "uprobes: use vm_special_mapping close() functionality"
mm: support large folios swap-in for sync io devices
mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios
mm: fix swap_read_folio_zeromap() for large folios with partial zeromap
mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries
set_memory: add __must_check to generic stubs
mm/vma: return the exact errno in vms_gather_munmap_vmas()
memcg: cleanup with !CONFIG_MEMCG_V1
mm/show_mem.c: report alloc tags in human readable units
mm: support poison recovery from copy_present_page()
mm: support poison recovery from do_cow_fault()
resource, kunit: add test case for region_intersects()
resource: make alloc_free_mem_region() works for iomem_resource
mm: z3fold: deprecate CONFIG_Z3FOLD
vfio/pci: implement huge_fault support
mm/arm64: support large pfn mappings
mm/x86: support large pfn mappings
...
|
||
Usama Arif
|
8422acdc97 |
mm: introduce a pageflag for partially mapped folios
Currently folio->_deferred_list is used to keep track of partially_mapped folios that are going to be split under memory pressure. In the next patch, all THPs that are faulted in and collapsed by khugepaged are also going to be tracked using _deferred_list. This patch introduces a pageflag to be able to distinguish between partially mapped folios and others in the deferred_list at split time in deferred_split_scan. Its needed as __folio_remove_rmap decrements _mapcount, _large_mapcount and _entire_mapcount, hence it won't be possible to distinguish between partially mapped folios and others in deferred_split_scan. Eventhough it introduces an extra flag to track if the folio is partially mapped, there is no functional change intended with this patch and the flag is not useful in this patch itself, it will become useful in the next patch when _deferred_list has non partially mapped folios. Link: https://lkml.kernel.org/r/20240830100438.3623486-5-usamaarif642@gmail.com Signed-off-by: Usama Arif <usamaarif642@gmail.com> Cc: Alexander Zhu <alexlzhu@fb.com> Cc: Barry Song <baohua@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kairui Song <ryncsn@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nico Pache <npache@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Shuang Zhai <zhais@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Shuang Zhai <szhai2@cs.rochester.edu> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Chris Li
|
0885ef4705 |
mm: vmscan.c: fix OOM on swap stress test
I found a regression on mm-unstable during my swap stress test, using tmpfs to compile linux. The test OOM very soon after the make spawns many cc processes. It bisects down to this change: |
||
Kaiyang Zhao
|
f77f0c7514 |
mm,memcg: provide per-cgroup counters for NUMA balancing operations
The ability to observe the demotion and promotion decisions made by the kernel on a per-cgroup basis is important for monitoring and tuning containerized workloads on machines equipped with tiered memory. Different containers in the system may experience drastically different memory tiering actions that cannot be distinguished from the global counters alone. For example, a container running a workload that has a much hotter memory accesses will likely see more promotions and fewer demotions, potentially depriving a colocated container of top tier memory to such an extent that its performance degrades unacceptably. For another example, some containers may exhibit longer periods between data reuse, causing much more numa_hint_faults than numa_pages_migrated. In this case, tuning hot_threshold_ms may be appropriate, but the signal can easily be lost if only global counters are available. In the long term, we hope to introduce per-cgroup control of promotion and demotion actions to implement memory placement policies in tiering. This patch set adds seven counters to memory.stat in a cgroup: numa_pages_migrated, numa_pte_updates, numa_hint_faults, pgdemote_kswapd, pgdemote_khugepaged, pgdemote_direct and pgpromote_success. pgdemote_* and pgpromote_success are also available in memory.numa_stat. count_memcg_events_mm() is added to count multiple event occurrences at once, and get_mem_cgroup_from_folio() is added because we need to get a reference to the memcg of a folio before it's migrated to track numa_pages_migrated. The accounting of PGDEMOTE_* is moved to shrink_inactive_list() before being changed to per-cgroup. [kaiyang2@cs.cmu.edu: add documentation of the memcg counters in cgroup-v2.rst] Link: https://lkml.kernel.org/r/20240814235122.252309-1-kaiyang2@cs.cmu.edu Link: https://lkml.kernel.org/r/20240814174227.30639-1-kaiyang2@cs.cmu.edu Signed-off-by: Kaiyang Zhao <kaiyang2@cs.cmu.edu> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Wei Xu <weixugc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Baolin Wang
|
809bc86517 |
mm: shmem: support large folio swap out
Shmem will support large folio allocation [1] [2] to get a better performance, however, the memory reclaim still splits the precious large folios when trying to swap out shmem, which may lead to the memory fragmentation issue and can not take advantage of the large folio for shmeme. Moreover, the swap code already supports for swapping out large folio without split, hence this patch set supports the large folio swap out for shmem. Note the i915_gem_shmem driver still need to be split when swapping, thus add a new flag 'split_large_folio' for writeback_control to indicate spliting the large folio. [1] https://lore.kernel.org/all/cover.1717495894.git.baolin.wang@linux.alibaba.com/ [2] https://lore.kernel.org/all/20240515055719.32577-1-da.gomez@samsung.com/ [hughd@google.com: shmem_writepage() split folio at EOF before swapout] Link: https://lkml.kernel.org/r/aef55f8d-6040-692d-65e3-16150cce4440@google.com [baolin.wang@linux.alibaba.com: remove the wbc->split_large_folio per Hugh] Link: https://lkml.kernel.org/r/1236a002daa301b3b9ba73d6c0fab348427cf295.1724833399.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/d80c21abd20e1b0f5ca66b330f074060fb2f082d.1723434324.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Barry Song <baohua@kernel.org> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Pankaj Raghav <p.raghav@samsung.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Shakeel Butt
|
90a6f2a8f4 |
memcg: use ratelimited stats flush in the reclaim
The Meta prod is seeing large amount of stalls in memcg stats flush from the memcg reclaim code path. At the moment, this specific callsite is doing a synchronous memcg stats flush. The rstat flush is an expensive and time consuming operation, so concurrent relaimers will busywait on the lock potentially for a long time. Actually this issue is not unique to Meta and has been observed by Cloudflare [1] as well. For the Cloudflare case, the stalls were due to contention between kswapd threads running on their 8 numa node machines which does not make sense as rstat flush is global and flush from one kswapd thread should be sufficient for all. Simply replace the synchronous flush with the ratelimited one. One may raise a concern on potentially using 2 sec stale (at worst) stats for heuristics like desirable inactive:active ratio and preferring inactive file pages over anon pages but these specific heuristics do not require very precise stats and also are ignored under severe memory pressure. More specifically for this code path, the stats are needed for two specific heuristics: 1. Deactivate LRUs 2. Cache trim mode The deactivate LRUs heuristic is to maintain a desirable inactive:active ratio of the LRUs. The specific stats needed are WORKINGSET_ACTIVATE* and the hierarchical LRU size. The WORKINGSET_ACTIVATE* is needed to check if there is a refault since last snapshot and the LRU size are needed for the desirable ratio between inactive and active LRUs. See the table below on how the desirable ratio is calculated. /* total target max * memory ratio inactive * ------------------------------------- * 10MB 1 5MB * 100MB 1 50MB * 1GB 3 250MB * 10GB 10 0.9GB * 100GB 31 3GB * 1TB 101 10GB * 10TB 320 32GB */ The desirable ratio only changes at the boundary of 1 GiB, 10 GiB, 100 GiB, 1 TiB and 10 TiB. There is no need for the precise and accurate LRU size information to calculate this ratio. In addition, if deactivation is skipped for some LRU, the kernel will force deactive on the severe memory pressure situation. For the cache trim mode, inactive file LRU size is read and the kernel scales it down based on the reclaim iteration (file >> sc->priority) and only checks if it is zero or not. Again precise information is not needed. This patch has been running on Meta fleet for several months and we have not observed any issues. Please note that MGLRU is not impacted by this issue at all as it avoids rstat flushing completely. Link: https://lore.kernel.org/all/6ee2518b-81dd-4082-bdf5-322883895ffc@kernel.org [1] Link: https://lkml.kernel.org/r/20240813215358.2259750-1-shakeel.butt@linux.dev Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Jesper Dangaard Brouer <hawk@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Nhat Pham <nphamcs@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Yuanchu Xie
|
bceeeaed48 |
mm: multi-gen LRU: ignore non-leaf pmd_young for force_scan=true
When non-leaf pmd accessed bits are available, MGLRU page table walks can clear the non-leaf pmd accessed bit and ignore the accessed bit on the pte if it's on a different node, skipping a generation update as well. If another scan occurs on the same node as said skipped pte. The non-leaf pmd accessed bit might remain cleared and the pte accessed bits won't be checked. While this is sufficient for reclaim-driven aging, where the goal is to select a reasonably cold page, the access can be missed when aging proactively for workingset estimation of a node/memcg. In more detail, get_pfn_folio returns NULL if the folio's nid != node under scanning, so the page table walk skips processing of said pte. Now the pmd_young flag on this pmd is cleared, and if none of the pte's are accessed before another scan occurs on the folio's node, the pmd_young check fails and the pte accessed bit is skipped. Since force_scan disables various other optimizations, we check force_scan to ignore the non-leaf pmd accessed bit. Link: https://lkml.kernel.org/r/20240813163759.742675-1-yuanchu@google.com Signed-off-by: Yuanchu Xie <yuanchu@google.com> Acked-by: Yu Zhao <yuzhao@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Lance Yang <ioworker0@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
David Hildenbrand
|
8710f6ed34 |
mm/huge_memory: convert split_huge_pages_pid() from follow_page() to folio_walk
Let's remove yet another follow_page() user. Note that we have to do the split without holding the PTL, after folio_walk_end(). We don't care about losing the secretmem check in follow_page(). [david@redhat.com: teach can_split_folio() that we are not holding an additional reference] Link: https://lkml.kernel.org/r/c75d1c6c-8ea6-424f-853c-1ccda6c77ba2@redhat.com Link: https://lkml.kernel.org/r/20240802155524.517137-8-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kaiyang Zhao
|
03790c51a4 |
mm: create promo_wmark_pages and clean up open-coded sites
Patch series "mm: print the promo watermark in zoneinfo", v2. This patch (of 2): Define promo_wmark_pages and convert current call sites of wmark_pages with fixed WMARK_PROMO to using it instead. Link: https://lkml.kernel.org/r/20240801232548.36604-1-kaiyang2@cs.cmu.edu Link: https://lkml.kernel.org/r/20240801232548.36604-2-kaiyang2@cs.cmu.edu Signed-off-by: Kaiyang Zhao <kaiyang2@cs.cmu.edu> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Zhiguo Jiang
|
c495b97624 |
mm: shrink skip folio mapped by an exiting process
The releasing process of the non-shared anonymous folio mapped solely by an exiting process may go through two flows: 1) the anonymous folio is firstly is swaped-out into swapspace and transformed into a swp_entry in shrink_folio_list; 2) then the swp_entry is released in the process exiting flow. This will result in the high cpu load of releasing a non-shared anonymous folio mapped solely by an exiting process. When the low system memory and the exiting process exist at the same time, it will be likely to happen, because the non-shared anonymous folio mapped solely by an exiting process may be reclaimed by shrink_folio_list. This patch is that shrink skips the non-shared anonymous folio solely mapped by an exting process and this folio is only released directly in the process exiting flow, which will save swap-out time and alleviate the load of the process exiting. Barry provided some effectiveness testing in [1]. "I observed that this patch effectively skipped 6114 folios (either 4KB or 64KB mTHP), potentially reducing the swap-out by up to 92MB (97,300,480 bytes) during the process exit. The working set size is 256MB." Link: https://lkml.kernel.org/r/20240710083641.546-1-justinjiang@vivo.com Link: https://lore.kernel.org/linux-mm/20240710033212.36497-1-21cnbao@gmail.com/ [1] Signed-off-by: Zhiguo Jiang <justinjiang@vivo.com> Acked-by: Barry Song <baohua@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Matthew Cassell
|
5fe690a594 |
mm: add node_reclaim successes to VM event counters
/proc/vmstat currently shows the number of node_reclaim() failures when vm.zone_reclaim_mode is set appropriately. It would be convenient to have the number of successes right next to zone_reclaim_failed (similar to compaction and migration). While just a trivially addition to the vmstat file. It was helpful during benchmarking to not have to probe node_reclaim() to observe the success/failure ratio. Link: https://lkml.kernel.org/r/20240722171316.7517-1-mcassell411@gmail.com Signed-off-by: Matthew Cassell <mcassell411@gmail.com> Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Li Zhijian <lizhijian@fujitsu.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Usama Arif
|
bfe0857c20 |
Revert "mm: skip CMA pages when they are not available"
This reverts commit |
||
|
Linus Torvalds
|
7a3fad30fd |
Random number generator updates for Linux 6.11-rc1.
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEq5lC5tSkz8NBJiCnSfxwEqXeA64FAmaarzgACgkQSfxwEqXe A66ZWBAAlhXx8bve0uKlDRK8fffWHgruho/fOY4lZJ137AKwA9JCtmOyqdfL4Dmk VxFe7pEQJlQhcA/6kH54uO7SBXwfKlKZJth6SYnaCRMUIbFifHjjIQ0QqldjEKi0 rP90Hu4FVsbwQC7u9i9lQj9n2P36zb6pn83BzpZQ/2PtoVCSCrdSJUe0Rxa3H3GN 0+nNkDSXQt5otCByLaeE3x7KJgXLWL9+G2eFSFLTZ8rSVfMx1CdOIAG37WlLGdWm BaFYPDKMyBTVvVJBNgAe9YSqtrsZ5nlmLz+Z9wAe/hTL7RlL03kWUu34/Udcpull zzMDH0WMntiGK3eFQ2gOYSWqypvAjwHgn3BzqNmjUb69+89mZsdU1slcvnxWsUwU D3vphrscaqarF629tfsXti3jc5PoXwUTjROZVcCyeFPBhyAZgzK8xUvPpJO+RT+K EuUABob9cpA6FCpW/QeolDmMDhXlNT8QgsZu1juokZac2xP3Ly3REyEvT7HLbU2W ZJjbEqm1ppp3RmGELUOJbyhwsLrnbt+OMDO7iEWoG8aSFK4diBK/ZM6WvLMkr8Oi 7ioXGIsYkCy3c47wpZKTrAapOPJp5keqNAiHSEbXw8mozp6429QAEZxNOcczgHKC Ea2JzRkctqutcIT+Slw/uUe//i1iSsIHXbE81fp5udcQTJcUByo= =P8aI -----END PGP SIGNATURE----- Merge tag 'random-6.11-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator updates from Jason Donenfeld: "This adds getrandom() support to the vDSO. First, it adds a new kind of mapping to mmap(2), MAP_DROPPABLE, which lets the kernel zero out pages anytime under memory pressure, which enables allocating memory that never gets swapped to disk but also doesn't count as being mlocked. Then, the vDSO implementation of getrandom() is introduced in a generic manner and hooked into random.c. Next, this is implemented on x86. (Also, though it's not ready for this pull, somebody has begun an arm64 implementation already) Finally, two vDSO selftests are added. There are also two housekeeping cleanup commits" * tag 'random-6.11-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: MAINTAINERS: add random.h headers to RNG subsection random: note that RNDGETPOOL was removed in 2.6.9-rc2 selftests/vDSO: add tests for vgetrandom x86: vdso: Wire up getrandom() vDSO implementation random: introduce generic vDSO getrandom() implementation mm: add MAP_DROPPABLE for designating always lazily freeable mappings |
||
Jason A. Donenfeld
|
9651fcedf7 |
mm: add MAP_DROPPABLE for designating always lazily freeable mappings
The vDSO getrandom() implementation works with a buffer allocated with a
new system call that has certain requirements:
- It shouldn't be written to core dumps.
* Easy: VM_DONTDUMP.
- It should be zeroed on fork.
* Easy: VM_WIPEONFORK.
- It shouldn't be written to swap.
* Uh-oh: mlock is rlimited.
* Uh-oh: mlock isn't inherited by forks.
- It shouldn't reserve actual memory, but it also shouldn't crash when
page faulting in memory if none is available
* Uh-oh: VM_NORESERVE means segfaults.
It turns out that the vDSO getrandom() function has three really nice
characteristics that we can exploit to solve this problem:
1) Due to being wiped during fork(), the vDSO code is already robust to
having the contents of the pages it reads zeroed out midway through
the function's execution.
2) In the absolute worst case of whatever contingency we're coding for,
we have the option to fallback to the getrandom() syscall, and
everything is fine.
3) The buffers the function uses are only ever useful for a maximum of
60 seconds -- a sort of cache, rather than a long term allocation.
These characteristics mean that we can introduce VM_DROPPABLE, which
has the following semantics:
a) It never is written out to swap.
b) Under memory pressure, mm can just drop the pages (so that they're
zero when read back again).
c) It is inherited by fork.
d) It doesn't count against the mlock budget, since nothing is locked.
e) If there's not enough memory to service a page fault, it's not fatal,
and no signal is sent.
This way, allocations used by vDSO getrandom() can use:
VM_DROPPABLE | VM_DONTDUMP | VM_WIPEONFORK | VM_NORESERVE
And there will be no problem with OOMing, crashing on overcommitment,
using memory when not in use, not wiping on fork(), coredumps, or
writing out to swap.
In order to let vDSO getrandom() use this, expose these via mmap(2) as
MAP_DROPPABLE.
Note that this involves removing the MADV_FREE special case from
sort_folio(), which according to Yu Zhao is unnecessary and will simply
result in an extra call to shrink_folio_list() in the worst case. The
chunk removed reenables the swapbacked flag, which we don't want for
VM_DROPPABLE, and we can't conditionalize it here because there isn't a
vma reference available.
Finally, the provided self test ensures that this is working as desired.
Cc: linux-mm@kvack.org
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
||
|
Yu Zhao
|
30d77b7eef |
mm/mglru: fix ineffective protection calculation
mem_cgroup_calculate_protection() is not stateless and should only be used
as part of a top-down tree traversal. shrink_one() traverses the per-node
memcg LRU instead of the root_mem_cgroup tree, and therefore it should not
call mem_cgroup_calculate_protection().
The existing misuse in shrink_one() can cause ineffective protection of
sub-trees that are grandchildren of root_mem_cgroup. Fix it by reusing
lru_gen_age_node(), which already traverses the root_mem_cgroup tree, to
calculate the protection.
Previously lru_gen_age_node() opportunistically skips the first pass,
i.e., when scan_control->priority is DEF_PRIORITY. On the second pass,
lruvec_is_sizable() uses appropriate scan_control->priority, set by
set_initial_priority() from lru_gen_shrink_node(), to decide whether a
memcg is too small to reclaim from.
Now lru_gen_age_node() unconditionally traverses the root_mem_cgroup tree.
So it should call set_initial_priority() upfront, to make sure
lruvec_is_sizable() uses appropriate scan_control->priority on the first
pass. Otherwise, lruvec_is_reclaimable() can return false negatives and
result in premature OOM kills when min_ttl_ms is used.
Link: https://lkml.kernel.org/r/20240712232956.1427127-1-yuzhao@google.com
Fixes:
|
||
|
Yu Zhao
|
3f74e6bd3b |
mm/mglru: fix overshooting shrinker memory
set_initial_priority() tries to jump-start global reclaim by estimating
the priority based on cold/hot LRU pages. The estimation does not account
for shrinker objects, and it cannot do so because their sizes can be in
different units other than page.
If shrinker objects are the majority, e.g., on TrueNAS SCALE 24.04.0 where
ZFS ARC can use almost all system memory, set_initial_priority() can
vastly underestimate how much memory ARC shrinker can evict and assign
extreme low values to scan_control->priority, resulting in overshoots of
shrinker objects.
To reproduce the problem, using TrueNAS SCALE 24.04.0 with 32GB DRAM, a
test ZFS pool and the following commands:
fio --name=mglru.file --numjobs=36 --ioengine=io_uring \
--directory=/root/test-zfs-pool/ --size=1024m --buffered=1 \
--rw=randread --random_distribution=random \
--time_based --runtime=1h &
for ((i = 0; i < 20; i++))
do
sleep 120
fio --name=mglru.anon --numjobs=16 --ioengine=mmap \
--filename=/dev/zero --size=1024m --fadvise_hint=0 \
--rw=randrw --random_distribution=random \
--time_based --runtime=1m
done
To fix the problem:
1. Cap scan_control->priority at or above DEF_PRIORITY/2, to prevent
the jump-start from being overly aggressive.
2. Account for the progress from mm_account_reclaimed_pages(), to
prevent kswapd_shrink_node() from raising the priority
unnecessarily.
Link: https://lkml.kernel.org/r/20240711191957.939105-2-yuzhao@google.com
Fixes:
|
||
|
Yu Zhao
|
8b671fe1a8 |
mm/mglru: fix div-by-zero in vmpressure_calc_level()
evict_folios() uses a second pass to reclaim folios that have gone through
page writeback and become clean before it finishes the first pass, since
folio_rotate_reclaimable() cannot handle those folios due to the
isolation.
The second pass tries to avoid potential double counting by deducting
scan_control->nr_scanned. However, this can result in underflow of
nr_scanned, under a condition where shrink_folio_list() does not increment
nr_scanned, i.e., when folio_trylock() fails.
The underflow can cause the divisor, i.e., scale=scanned+reclaimed in
vmpressure_calc_level(), to become zero, resulting in the following crash:
[exception RIP: vmpressure_work_fn+101]
process_one_work at ffffffffa3313f2b
Since scan_control->nr_scanned has no established semantics, the potential
double counting has minimal risks. Therefore, fix the problem by not
deducting scan_control->nr_scanned in evict_folios().
Link: https://lkml.kernel.org/r/20240711191957.939105-1-yuzhao@google.com
Fixes:
|
||
Barry Song
|
e5a119c4a6 |
mm/vmscan: drop checking if _deferred_list is empty before using TTU_SYNC
The optimization of list_empty(&folio->_deferred_list) aimed to prevent
increasing the PTL duration when a large folio is partially unmapped, for
example, from subpage 0 to subpage (nr - 2).
But Ryan's commit
|
||
Dan Schatzberg
|
68cd9050d8 |
mm: add swappiness= arg to memory.reclaim
Allow proactive reclaimers to submit an additional swappiness=<val> argument to memory.reclaim. This overrides the global or per-memcg swappiness setting for that reclaim attempt. For example: echo "2M swappiness=0" > /sys/fs/cgroup/memory.reclaim will perform reclaim on the rootcg with a swappiness setting of 0 (no swap) regardless of the vm.swappiness sysctl setting. Userspace proactive reclaimers use the memory.reclaim interface to trigger reclaim. The memory.reclaim interface does not allow for any way to effect the balance of file vs anon during proactive reclaim. The only approach is to adjust the vm.swappiness setting. However, there are a few reasons we look to control the balance of file vs anon during proactive reclaim, separately from reactive reclaim: * Swapout should be limited to manage SSD write endurance. In near-OOM situations we are fine with lots of swap-out to avoid OOMs. As these are typically rare events, they have relatively little impact on write endurance. However, proactive reclaim runs continuously and so its impact on SSD write endurance is more significant. Therefore it is desireable to control swap-out for proactive reclaim separately from reactive reclaim * Some userspace OOM killers like systemd-oomd[1] support OOM killing on swap exhaustion. This makes sense if the swap exhaustion is triggered due to reactive reclaim but less so if it is triggered due to proactive reclaim (e.g. one could see OOMs when free memory is ample but anon is just particularly cold). Therefore, it's desireable to have proactive reclaim reduce or stop swap-out before the threshold at which OOM killing occurs. In the case of Meta's Senpai proactive reclaimer, we adjust vm.swappiness before writes to memory.reclaim[2]. This has been in production for nearly two years and has addressed our needs to control proactive vs reactive reclaim behavior but is still not ideal for a number of reasons: * vm.swappiness is a global setting, adjusting it can race/interfere with other system administration that wishes to control vm.swappiness. In our case, we need to disable Senpai before adjusting vm.swappiness. * vm.swappiness is stateful - so a crash or restart of Senpai can leave a misconfigured setting. This requires some additional management to record the "desired" setting and ensure Senpai always adjusts to it. With this patch, we avoid these downsides of adjusting vm.swappiness globally. [1]https://www.freedesktop.org/software/systemd/man/latest/systemd-oomd.service.html [2]https://github.com/facebookincubator/oomd/blob/main/src/oomd/plugins/Senpai.cpp#L585-L598 Link: https://lkml.kernel.org/r/20240103164841.2800183-3-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Suggested-by: Yosry Ahmed <yosryahmed@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Yue Zhao <findns94@gmail.com> Cc: Zefan Li <lizefan.x@bytedance.com> Cc: Nhat Pham <nphamcs@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Dan Schatzberg
|
410abb20ac |
mm: add defines for min/max swappiness
Patch series "Add swappiness argument to memory.reclaim", v6. This patch proposes augmenting the memory.reclaim interface with a swappiness=<val> argument that overrides the swappiness value for that instance of proactive reclaim. Userspace proactive reclaimers use the memory.reclaim interface to trigger reclaim. The memory.reclaim interface does not allow for any way to effect the balance of file vs anon during proactive reclaim. The only approach is to adjust the vm.swappiness setting. However, there are a few reasons we look to control the balance of file vs anon during proactive reclaim, separately from reactive reclaim: * Swapout should be limited to manage SSD write endurance. In near-OOM situations we are fine with lots of swap-out to avoid OOMs. As these are typically rare events, they have relatively little impact on write endurance. However, proactive reclaim runs continuously and so its impact on SSD write endurance is more significant. Therefore it is desireable to control swap-out for proactive reclaim separately from reactive reclaim * Some userspace OOM killers like systemd-oomd[1] support OOM killing on swap exhaustion. This makes sense if the swap exhaustion is triggered due to reactive reclaim but less so if it is triggered due to proactive reclaim (e.g. one could see OOMs when free memory is ample but anon is just particularly cold). Therefore, it's desireable to have proactive reclaim reduce or stop swap-out before the threshold at which OOM killing occurs. In the case of Meta's Senpai proactive reclaimer, we adjust vm.swappiness before writes to memory.reclaim[2]. This has been in production for nearly two years and has addressed our needs to control proactive vs reactive reclaim behavior but is still not ideal for a number of reasons: * vm.swappiness is a global setting, adjusting it can race/interfere with other system administration that wishes to control vm.swappiness. In our case, we need to disable Senpai before adjusting vm.swappiness. * vm.swappiness is stateful - so a crash or restart of Senpai can leave a misconfigured setting. This requires some additional management to record the "desired" setting and ensure Senpai always adjusts to it. With this patch, we avoid these downsides of adjusting vm.swappiness globally. Previously, this exact interface addition was proposed by Yosry[3]. In response, Roman proposed instead an interface to specify precise file/anon/slab reclaim amounts[4]. More recently Huan also proposed this as well[5] and others similarly questioned if this was the proper interface. Previous proposals sought to use this to allow proactive reclaimers to effectively perform a custom reclaim algorithm by issuing proactive reclaim with different settings to control file vs anon reclaim (e.g. to only reclaim anon from some applications). Responses argued that adjusting swappiness is a poor interface for custom reclaim. In contrast, I argue in favor of a swappiness setting not as a way to implement custom reclaim algorithms but rather to bias the balance of anon vs file due to differences of proactive vs reactive reclaim. In this context, swappiness is the existing interface for controlling this balance and this patch simply allows for it to be configured differently for proactive vs reactive reclaim. Specifying explicit amounts of anon vs file pages to reclaim feels inappropriate for this prupose. Proactive reclaimers are un-aware of the relative age of file vs anon for a cgroup which makes it difficult to manage proactive reclaim of different memory pools. A proactive reclaimer would need some amount of anon reclaim attempts separate from the amount of file reclaim attempts which seems brittle given that it's difficult to observe the impact. [1]https://www.freedesktop.org/software/systemd/man/latest/systemd-oomd.service.html [2]https://github.com/facebookincubator/oomd/blob/main/src/oomd/plugins/Senpai.cpp#L585-L598 [3]https://lore.kernel.org/linux-mm/CAJD7tkbDpyoODveCsnaqBBMZEkDvshXJmNdbk51yKSNgD7aGdg@mail.gmail.com/ [4]https://lore.kernel.org/linux-mm/YoPHtHXzpK51F%2F1Z@carbon/ [5]https://lore.kernel.org/lkml/20231108065818.19932-1-link@vivo.com/ This patch (of 2): We use the constants 0 and 200 in a few places in the mm code when referring to the min and max swappiness. This patch adds MIN_SWAPPINESS and MAX_SWAPPINESS #defines to improve clarity. There are no functional changes. Link: https://lkml.kernel.org/r/20240103164841.2800183-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20240103164841.2800183-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Tejun Heo <tj@kernel.org> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yue Zhao <findns94@gmail.com> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Roman Gushchin
|
87024f5837 |
mm: memcg: rename soft limit reclaim-related functions
Rename exported function related to the softlimit reclaim to have memcg1_ prefix. Link: https://lkml.kernel.org/r/20240625005906.106920-4-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Kefeng Wang
|
593a10dabe |
mm: refactor folio_undo_large_rmappable()
Folios of order <= 1 are not in deferred list, the check of order is added
into folio_undo_large_rmappable() from commit
|
||
Honggyu Kim
|
8f75267d22 |
mm: rename alloc_demote_folio to alloc_migrate_folio
The alloc_demote_folio can also be used for general migration including both demotion and promotion so it'd be better to rename it from alloc_demote_folio to alloc_migrate_folio. Link: https://lkml.kernel.org/r/20240614030010.751-3-honggyu.kim@sk.com Signed-off-by: Honggyu Kim <honggyu.kim@sk.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Gregory Price <gregory.price@memverge.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Hyeongtak Ji <hyeongtak.ji@sk.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Honggyu Kim
|
a00ce85af2 |
mm: make alloc_demote_folio externally invokable for migration
Patch series "DAMON based tiered memory management for CXL memory", v6.
Introduction
============
With the advent of CXL/PCIe attached DRAM, which will be called simply as
CXL memory in this cover letter, some systems are becoming more
heterogeneous having memory systems with different latency and bandwidth
characteristics. They are usually handled as different NUMA nodes in
separate memory tiers and CXL memory is used as slow tiers because of its
protocol overhead compared to local DRAM.
In this kind of systems, we need to be careful placing memory pages on
proper NUMA nodes based on the memory access frequency. Otherwise, some
frequently accessed pages might reside on slow tiers and it makes
performance degradation unexpectedly. Moreover, the memory access
patterns can be changed at runtime.
To handle this problem, we need a way to monitor the memory access
patterns and migrate pages based on their access temperature. The
DAMON(Data Access MONitor) framework and its DAMOS(DAMON-based Operation
Schemes) can be useful features for monitoring and migrating pages. DAMOS
provides multiple actions based on DAMON monitoring results and it can be
used for proactive reclaim, which means swapping cold pages out with
DAMOS_PAGEOUT action, but it doesn't support migration actions such as
demotion and promotion between tiered memory nodes.
This series supports two new DAMOS actions; DAMOS_MIGRATE_HOT for
promotion from slow tiers and DAMOS_MIGRATE_COLD for demotion from fast
tiers. This prevents hot pages from being stuck on slow tiers, which
makes performance degradation and cold pages can be proactively demoted to
slow tiers so that the system can increase the chance to allocate more hot
pages to fast tiers.
The DAMON provides various tuning knobs but we found that the proactive
demotion for cold pages is especially useful when the system is running
out of memory on its fast tier nodes.
Our evaluation result shows that it reduces the performance slowdown
compared to the default memory policy from 11% to 3~5% when the system
runs under high memory pressure on its fast tier DRAM nodes.
DAMON configuration
===================
The specific DAMON configuration doesn't have to be in the scope of this
patch series, but some rough idea is better to be shared to explain the
evaluation result.
The DAMON provides many knobs for fine tuning but its configuration file
is generated by HMSDK[3]. It includes gen_config.py script that generates
a json file with the full config of DAMON knobs and it creates multiple
kdamonds for each NUMA node when the DAMON is enabled so that it can run
hot/cold based migration for tiered memory.
Evaluation Workload
===================
The performance evaluation is done with redis[4], which is a widely used
in-memory database and the memory access patterns are generated via
YCSB[5]. We have measured two different workloads with zipfian and latest
distributions but their configs are slightly modified to make memory usage
higher and execution time longer for better evaluation.
The idea of evaluation using these migrate_{hot,cold} actions covers
system-wide memory management rather than partitioning hot/cold pages of a
single workload. The default memory allocation policy creates pages to
the fast tier DRAM node first, then allocates newly created pages to the
slow tier CXL node when the DRAM node has insufficient free space. Once
the page allocation is done then those pages never move between NUMA
nodes. It's not true when using numa balancing, but it is not the scope
of this DAMON based tiered memory management support.
If the working set of redis can be fit fully into the DRAM node, then the
redis will access the fast DRAM only. Since the performance of DRAM only
is faster than partially accessing CXL memory in slow tiers, this
environment is not useful to evaluate this patch series.
To make pages of redis be distributed across fast DRAM node and slow CXL
node to evaluate our migrate_{hot,cold} actions, we pre-allocate some cold
memory externally using mmap and memset before launching redis-server. We
assumed that there are enough amount of cold memory in datacenters as
TMO[6] and TPP[7] papers mentioned.
The evaluation sequence is as follows.
1. Turn on DAMON with DAMOS_MIGRATE_COLD action for DRAM node and
DAMOS_MIGRATE_HOT action for CXL node. It demotes cold pages on DRAM
node and promotes hot pages on CXL node in a regular interval.
2. Allocate a huge block of cold memory by calling mmap and memset at
the fast tier DRAM node, then make the process sleep to make the fast
tier has insufficient space for redis-server.
3. Launch redis-server and load prebaked snapshot image, dump.rdb. The
redis-server consumes 52GB of anon pages and 33GB of file pages, but
due to the cold memory allocated at 2, it fails allocating the entire
memory of redis-server on the fast tier DRAM node so it partially
allocates the remaining on the slow tier CXL node. The ratio of
DRAM:CXL depends on the size of the pre-allocated cold memory.
4. Run YCSB to make zipfian or latest distribution of memory accesses to
redis-server, then measure its execution time when it's completed.
5. Repeat 4 over 50 times to measure the average execution time for each
run.
6. Increase the cold memory size then repeat goes to 2.
For each test at 4 took about a minute so repeating it 50 times almost
took about 1 hour for each test with a specific cold memory from 440GB to
500GB in 10GB increments for each evaluation. So it took about more than
10 hours for both zipfian and latest workloads to get the entire
evaluation results. Repeating the same test set multiple times doesn't
show much difference so I think it might be enough to make the result
reliable.
Evaluation Results
==================
All the result values are normalized to DRAM-only execution time because
the workload cannot be faster than DRAM-only unless the workload hits the
peak bandwidth but our redis test doesn't go beyond the bandwidth limit.
So the DRAM-only execution time is the ideal result without affected by
the gap between DRAM and CXL performance difference. The NUMA node
environment is as follows.
node0 - local DRAM, 512GB with a CPU socket (fast tier)
node1 - disabled
node2 - CXL DRAM, 96GB, no CPU attached (slow tier)
The following is the result of generating zipfian distribution to
redis-server and the numbers are averaged by 50 times of execution.
1. YCSB zipfian distribution read only workload
memory pressure with cold memory on node0 with 512GB of local DRAM.
====================+================================================+=========
| cold memory occupied by mmap and memset |
| 0G 440G 450G 460G 470G 480G 490G 500G |
====================+================================================+=========
Execution time normalized to DRAM-only values | GEOMEAN
--------------------+------------------------------------------------+---------
DRAM-only | 1.00 - - - - - - - | 1.00
CXL-only | 1.19 - - - - - - - | 1.19
default | - 1.00 1.05 1.08 1.12 1.14 1.18 1.18 | 1.11
DAMON tiered | - 1.03 1.03 1.03 1.03 1.03 1.07 *1.05 | 1.04
DAMON lazy | - 1.04 1.03 1.04 1.05 1.06 1.06 *1.06 | 1.05
====================+================================================+=========
CXL usage of redis-server in GB | AVERAGE
--------------------+------------------------------------------------+---------
DRAM-only | 0.0 - - - - - - - | 0.0
CXL-only | 51.4 - - - - - - - | 51.4
default | - 0.6 10.6 20.5 30.5 40.5 47.6 50.4 | 28.7
DAMON tiered | - 0.6 0.5 0.4 0.7 0.8 7.1 5.6 | 2.2
DAMON lazy | - 0.5 3.0 4.5 5.4 6.4 9.4 9.1 | 5.5
====================+================================================+=========
Each test result is based on the execution environment as follows.
DRAM-only: redis-server uses only local DRAM memory.
CXL-only: redis-server uses only CXL memory.
default: default memory policy(MPOL_DEFAULT).
numa balancing disabled.
DAMON tiered: DAMON enabled with DAMOS_MIGRATE_COLD for DRAM
nodes and DAMOS_MIGRATE_HOT for CXL nodes.
DAMON lazy: same as DAMON tiered, but turn on DAMON just
before making memory access request via YCSB.
The above result shows the "default" execution time goes up as the size of
cold memory is increased from 440G to 500G because the more cold memory
used, the more CXL memory is used for the target redis workload and this
makes the execution time increase.
However, "DAMON tiered" and other DAMON results show less slowdown because
the DAMOS_MIGRATE_COLD action at DRAM node proactively demotes
pre-allocated cold memory to CXL node and this free space at DRAM
increases more chance to allocate hot or warm pages of redis-server to
fast DRAM node. Moreover, DAMOS_MIGRATE_HOT action at CXL node also
promotes hot pages of redis-server to DRAM node actively.
As a result, it makes more memory of redis-server stay in DRAM node
compared to "default" memory policy and this makes the performance
improvement.
Please note that the result numbers of "DAMON tiered" and "DAMON lazy" at
500G are marked with * stars, which means their test results are replaced
with reproduced tests that didn't have OOM issue.
That was needed because sometimes the test processes get OOM when DRAM has
insufficient space. The DAMOS_MIGRATE_HOT doesn't kick reclaim but just
gives up migration when there is not enough space at DRAM side. The
problem happens when there is competition between normal allocation and
migration and the migration is done before normal allocation, then the
completely unrelated normal allocation can trigger reclaim, which incurs
OOM.
Because of this issue, I have also tested more cases with
"demotion_enabled" flag enabled to make such reclaim doesn't trigger OOM,
but just demote reclaimed pages. The following test results show more
tests with "kswapd" marked.
2. YCSB zipfian distribution read only workload (with demotion_enabled true)
memory pressure with cold memory on node0 with 512GB of local DRAM.
====================+================================================+=========
| cold memory occupied by mmap and memset |
| 0G 440G 450G 460G 470G 480G 490G 500G |
====================+================================================+=========
Execution time normalized to DRAM-only values | GEOMEAN
--------------------+------------------------------------------------+---------
DAMON tiered | - 1.03 1.03 1.03 1.03 1.03 1.07 1.05 | 1.04
DAMON lazy | - 1.04 1.03 1.04 1.05 1.06 1.06 1.06 | 1.05
DAMON tiered kswapd | - 1.03 1.03 1.03 1.03 1.02 1.02 1.03 | 1.03
DAMON lazy kswapd | - 1.04 1.04 1.04 1.03 1.05 1.04 1.05 | 1.04
====================+================================================+=========
CXL usage of redis-server in GB | AVERAGE
--------------------+------------------------------------------------+---------
DAMON tiered | - 0.6 0.5 0.4 0.7 0.8 7.1 5.6 | 2.2
DAMON lazy | - 0.5 3.0 4.5 5.4 6.4 9.4 9.1 | 5.5
DAMON tiered kswapd | - 0.0 0.0 0.4 0.5 0.1 0.8 1.0 | 0.4
DAMON lazy kswapd | - 4.2 4.6 5.3 1.7 6.8 8.1 5.8 | 5.2
====================+================================================+=========
Each test result is based on the exeuction environment as follows.
DAMON tiered: same as before
DAMON lazy: same as before
DAMON tiered kswapd: same as DAMON tiered, but turn on
/sys/kernel/mm/numa/demotion_enabled to make
kswapd or direct reclaim does demotion.
DAMON lazy kswapd: same as DAMON lazy, but turn on
/sys/kernel/mm/numa/demotion_enabled to make
kswapd or direct reclaim does demotion.
The "DAMON tiered kswapd" and "DAMON lazy kswapd" didn't trigger OOM at
all unlike other tests because kswapd and direct reclaim from DRAM node
can demote reclaimed pages to CXL node independently from DAMON actions
and their results are slightly better than without having
"demotion_enabled".
In summary, the evaluation results show that DAMON memory management with
DAMOS_MIGRATE_{HOT,COLD} actions reduces the performance slowdown compared
to the "default" memory policy from 11% to 3~5% when the system runs with
high memory pressure on its fast tier DRAM nodes.
Having these DAMOS_MIGRATE_HOT and DAMOS_MIGRATE_COLD actions can make
tiered memory systems run more efficiently under high memory pressures.
This patch (of 7):
The alloc_demote_folio can be used out of vmscan.c so it'd be better to
remove static keyword from it.
Link: https://lkml.kernel.org/r/20240614030010.751-1-honggyu.kim@sk.com
Link: https://lkml.kernel.org/r/20240614030010.751-2-honggyu.kim@sk.com
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Gregory Price <gregory.price@memverge.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Hyeongtak Ji <hyeongtak.ji@sk.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Shakeel Butt
|
462966dc7d |
mm: vmscan: reset sc->priority on retry
The commit 6be5e186fd65 ("mm: vmscan: restore incremental cgroup
iteration") added a retry reclaim heuristic to iterate all the cgroups
before returning an unsuccessful reclaim but missed to reset the
sc->priority. Let's fix it.
Link: https://lkml.kernel.org/r/20240529154911.3008025-1-shakeel.butt@linux.dev
Fixes: 6be5e186fd65 ("mm: vmscan: restore incremental cgroup iteration")
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reported-by: syzbot+17416257cb95200cba44@syzkaller.appspotmail.com
Tested-by: syzbot+17416257cb95200cba44@syzkaller.appspotmail.com
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
Johannes Weiner
|
b82b530740 |
mm: vmscan: restore incremental cgroup iteration
Currently, reclaim always walks the entire cgroup tree in order to ensure
fairness between groups. While overreclaim is limited in shrink_lruvec(),
many of our systems have a sizable number of active groups, and an even
bigger number of idle cgroups with cache left behind by previous jobs; the
mere act of walking all these cgroups can impose significant latency on
direct reclaimers.
In the past, we've used a save-and-restore iterator that enabled
incremental tree walks over multiple reclaim invocations. This ensured
fairness, while keeping the work of individual reclaimers small.
However, in edge cases with a lot of reclaim concurrency, individual
reclaimers would sometimes not see enough of the cgroup tree to make
forward progress and (prematurely) declare OOM. Consequently we switched
to comprehensive walks in
|
||
|
Baolin Wang
|
0d648dd5c8 |
mm: drop the 'anon_' prefix for swap-out mTHP counters
The mTHP swap related counters: 'anon_swpout' and 'anon_swpout_fallback' are confusing with an 'anon_' prefix, since the shmem can swap out non-anonymous pages. So drop the 'anon_' prefix to keep consistent with the old swap counter names. This is needed in 6.10-rcX to avoid having an inconsistent ABI out in the field. Link: https://lkml.kernel.org/r/7a8989c13299920d7589007a30065c3e2c19f0e0.1716431702.git.baolin.wang@linux.alibaba.com Fixes: |
||
SeongJae Park
|
c961bddb7d |
mm/vmscan: remove ignore_references argument of reclaim_folio_list()
All reclaim_folio_list() callers are passing 'true' for 'ignore_references' parameter. In other words, the parameter is not really being used. Simplify the code by removing the parameter. Link: https://lkml.kernel.org/r/20240429224451.67081-5-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
14f5be2a2d |
mm/vmscan: remove ignore_references argument of reclaim_pages()
All reclaim_pages() callers are setting 'ignore_references' parameter 'true'. In other words, the parameter is not really being used. Remove the argument to make it simple. Link: https://lkml.kernel.org/r/20240429224451.67081-4-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Barry Song
|
d0f048ac39 |
mm: add per-order mTHP anon_swpout and anon_swpout_fallback counters
This helps to display the fragmentation situation of the swapfile, knowing the proportion of how much we haven't split large folios. So far, we only support non-split swapout for anon memory, with the possibility of expanding to shmem in the future. So, we add the "anon" prefix to the counter names. Link: https://lkml.kernel.org/r/20240412114858.407208-3-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Chris Li <chrisl@kernel.org> Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Cc: Kairui Song <kasong@tencent.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Ryan Roberts
|
5ed890ce51 |
mm: vmscan: avoid split during shrink_folio_list()
Now that swap supports storing all mTHP sizes, avoid splitting large folios before swap-out. This benefits performance of the swap-out path by eliding split_folio_to_list(), which is expensive, and also sets us up for swapping in large folios in a future series. If the folio is partially mapped, we continue to split it since we want to avoid the extra IO overhead and storage of writing out pages uneccessarily. THP_SWPOUT and THP_SWPOUT_FALLBACK counters should continue to count events only for PMD-mappable folios to avoid user confusion. THP_SWPOUT already has the appropriate guard. Add a guard for THP_SWPOUT_FALLBACK. It may be appropriate to add per-size counters in future. Link: https://lkml.kernel.org/r/20240408183946.2991168-7-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Barry Song <v-songbaohua@oppo.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Barry Song
|
73bc32875e |
mm: hold PTL from the first PTE while reclaiming a large folio
Within try_to_unmap_one(), page_vma_mapped_walk() races with other PTE modifications preceded by pte clear. While iterating over PTEs of a large folio, it only starts acquiring PTL from the first valid (present) PTE. PTE modifications can temporarily set PTEs to pte_none. Consequently, the initial PTEs of a large folio might be skipped in try_to_unmap_one(). For example, for an anon folio, if we skip PTE0, we may have PTE0 which is still present, while PTE1 ~ PTE(nr_pages - 1) are swap entries after try_to_unmap_one(). So folio will be still mapped, the folio fails to be reclaimed and is put back to LRU in this round. This also breaks up PTEs optimization such as CONT-PTE on this large folio and may lead to accident folio_split() afterwards. And since a part of PTEs are now swap entries, accessing those parts will introduce overhead - do_swap_page. Although the kernel can withstand all of the above issues, the situation still seems quite awkward and warrants making it more ideal. The same race also occurs with small folios, but they have only one PTE, thus, it won't be possible for them to be partially unmapped. This patch holds PTL from PTE0, allowing us to avoid reading PTE values that are in the process of being transformed. With stable PTE values, we can ensure that this large folio is either completely reclaimed or that all PTEs remain untouched in this round. A corner case is that if we hold PTL from PTE0 and most initial PTEs have been really unmapped before that, we may increase the duration of holding PTL. Thus we only apply this optimization to folios which are still entirely mapped (not in deferred_split list). [akpm@linux-foundation.org: rewrap comment, per Matthew] Link: https://lkml.kernel.org/r/20240306095219.71086-1-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Chris Li <chrisl@kernel.org> Cc: Chuanhua Han <hanchuanhua@oppo.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Huang, Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Baolin Wang
|
e42dfe4e0a |
mm: record the migration reason for struct migration_target_control
Patch series "make the hugetlb migration strategy consistent", v2. As discussed in previous thread [1], there is an inconsistency when handling hugetlb migration. When handling the migration of freed hugetlb, it prevents fallback to other NUMA nodes in alloc_and_dissolve_hugetlb_folio(). However, when dealing with in-use hugetlb, it allows fallback to other NUMA nodes in alloc_hugetlb_folio_nodemask(), which can break the per-node hugetlb pool and might result in unexpected failures when node bound workloads doesn't get what is asssumed available. This patchset tries to make the hugetlb migration strategy more clear and consistent. Please find details in each patch. [1] https://lore.kernel.org/all/6f26ce22d2fcd523418a085f2c588fe0776d46e7.1706794035.git.baolin.wang@linux.alibaba.com/ This patch (of 2): To support different hugetlb allocation strategies during hugetlb migration based on various migration reasons, record the migration reason in the migration_target_control structure as a preparation. Link: https://lkml.kernel.org/r/cover.1709719720.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/7b95d4981e07211f57139fc5b1f7ce91b920cee4.1709719720.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: David Hildenbrand <david@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Andrew Morton
|
5e28061128 | Merge branch 'master' into mm-stable | ||
Byungchul Park
|
d221dd5fea |
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
With cache_trim_mode on, reclaim logic doesn't bother reclaiming anon
pages. However, it should be more careful to use the mode because it's
going to prevent anon pages from being reclaimed even if there are a huge
number of anon pages that are cold and should be reclaimed. Even worse,
that leads kswapd_failures to reach MAX_RECLAIM_RETRIES and stopping
kswapd from functioning until direct reclaim eventually works to resume
kswapd.
So kswapd needs to retry its scan priority loop with cache_trim_mode off
again if the mode doesn't work for reclaim.
The problematic behavior can be reproduced by:
CONFIG_NUMA_BALANCING enabled
sysctl_numa_balancing_mode set to NUMA_BALANCING_MEMORY_TIERING
numa node0 (8GB local memory, 16 CPUs)
numa node1 (8GB slow tier memory, no CPUs)
Sequence:
1) echo 3 > /proc/sys/vm/drop_caches
2) To emulate the system with full of cold memory in local DRAM, run
the following dummy program and never touch the region:
mmap(0, 8 * 1024 * 1024 * 1024, PROT_READ | PROT_WRITE,
MAP_ANONYMOUS | MAP_PRIVATE | MAP_POPULATE, -1, 0);
3) Run any memory intensive work e.g. XSBench.
4) Check if numa balancing is working e.i. promotion/demotion.
5) Iterate 1) ~ 4) until numa balancing stops.
With this, you could see that promotion/demotion are not working because
kswapd has stopped due to ->kswapd_failures >= MAX_RECLAIM_RETRIES.
Interesting vmstat delta's differences between before and after are like:
+-----------------------+-------------------------------+
| interesting vmstat | before | after |
+-----------------------+-------------------------------+
| nr_inactive_anon | 321935 | 1664772 |
| nr_active_anon | 1780700 | 437834 |
| nr_inactive_file | 30425 | 40882 |
| nr_active_file | 14961 | 3012 |
| pgpromote_success | 356 | 1293122 |
| pgpromote_candidate | 21953245 | 1824148 |
| pgactivate | 1844523 | 3311907 |
| pgdeactivate | 50634 |
|
||
Matthew Wilcox (Oracle)
|
47932e7048 |
mm: remove folio from deferred split list before uncharging it
When freeing a large folio, we must remove it from the deferred split list before we uncharge it as each memcg has its own deferred split list (with associated lock) and removing a folio from the deferred split list while holding the wrong lock will corrupt that list and cause various related problems. Link: https://lore.kernel.org/linux-mm/367a14f7-340e-4b29-90ae-bc3fcefdd5f4@arm.com/ Link: https://lkml.kernel.org/r/20240311191835.312162-1-willy@infradead.org Fixes: |
||
|
Matthew Wilcox (Oracle)
|
29f3843026 |
mm: free folios directly in move_folios_to_lru()
The few folios which can't be moved to the LRU list (because their refcount dropped to zero) used to be returned to the caller to dispose of. Make this simpler to call by freeing the folios directly through free_unref_folios(). Link: https://lkml.kernel.org/r/20240227174254.710559-13-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
bc2ff4cbc3 |
mm: free folios in a batch in shrink_folio_list()
Use free_unref_page_batch() to free the folios. This may increase the number of IPIs from calling try_to_unmap_flush() more often, but that's going to be very workload-dependent. It may even reduce the number of IPIs as we now batch-free large folios instead of freeing them one at a time. Link: https://lkml.kernel.org/r/20240227174254.710559-12-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: David Hildenbrand <david@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Barry Song
|
2864f3d0f5 |
mm: madvise: pageout: ignore references rather than clearing young
While doing MADV_PAGEOUT, the current code will clear PTE young so that
vmscan won't read young flags to allow the reclamation of madvised folios
to go ahead. It seems we can do it by directly ignoring references, thus
we can remove tlb flush in madvise and rmap overhead in vmscan.
Regarding the side effect, in the original code, if a parallel thread runs
side by side to access the madvised memory with the thread doing madvise,
folios will get a chance to be re-activated by vmscan (though the time gap
is actually quite small since checking PTEs is done immediately after
clearing PTEs young). But with this patch, they will still be reclaimed.
But this behaviour doing PAGEOUT and doing access at the same time is
quite silly like DoS. So probably, we don't need to care. Or ignoring
the new access during the quite small time gap is even better.
For DAMON's DAMOS_PAGEOUT based on physical address region, we still keep
its behaviour as is since a physical address might be mapped by multiple
processes. MADV_PAGEOUT based on virtual address is actually much more
aggressive on reclamation. To untouch paddr's DAMOS_PAGEOUT, we simply
pass ignore_references as false in reclaim_pages().
A microbench as below has shown 6% decrement on the latency of
MADV_PAGEOUT,
#define PGSIZE 4096
main()
{
int i;
#define SIZE 512*1024*1024
volatile long *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
for (i = 0; i < SIZE/sizeof(long); i += PGSIZE / sizeof(long))
p[i] = 0x11;
madvise(p, SIZE, MADV_PAGEOUT);
}
w/o patch w/ patch
root@10:~# time ./a.out root@10:~# time ./a.out
real 0m49.634s real 0m46.334s
user 0m0.637s user 0m0.648s
sys 0m47.434s sys 0m44.265s
Link: https://lkml.kernel.org/r/20240226005739.24350-1-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
Vlastimil Babka
|
803de9000f |
mm, vmscan: prevent infinite loop for costly GFP_NOIO | __GFP_RETRY_MAYFAIL allocations
Sven reports an infinite loop in __alloc_pages_slowpath() for costly order
__GFP_RETRY_MAYFAIL allocations that are also GFP_NOIO. Such combination
can happen in a suspend/resume context where a GFP_KERNEL allocation can
have __GFP_IO masked out via gfp_allowed_mask.
Quoting Sven:
1. try to do a "costly" allocation (order > PAGE_ALLOC_COSTLY_ORDER)
with __GFP_RETRY_MAYFAIL set.
2. page alloc's __alloc_pages_slowpath tries to get a page from the
freelist. This fails because there is nothing free of that costly
order.
3. page alloc tries to reclaim by calling __alloc_pages_direct_reclaim,
which bails out because a zone is ready to be compacted; it pretends
to have made a single page of progress.
4. page alloc tries to compact, but this always bails out early because
__GFP_IO is not set (it's not passed by the snd allocator, and even
if it were, we are suspending so the __GFP_IO flag would be cleared
anyway).
5. page alloc believes reclaim progress was made (because of the
pretense in item 3) and so it checks whether it should retry
compaction. The compaction retry logic thinks it should try again,
because:
a) reclaim is needed because of the early bail-out in item 4
b) a zonelist is suitable for compaction
6. goto 2. indefinite stall.
(end quote)
The immediate root cause is confusing the COMPACT_SKIPPED returned from
__alloc_pages_direct_compact() (step 4) due to lack of __GFP_IO to be
indicating a lack of order-0 pages, and in step 5 evaluating that in
should_compact_retry() as a reason to retry, before incrementing and
limiting the number of retries. There are however other places that
wrongly assume that compaction can happen while we lack __GFP_IO.
To fix this, introduce gfp_compaction_allowed() to abstract the __GFP_IO
evaluation and switch the open-coded test in try_to_compact_pages() to use
it.
Also use the new helper in:
- compaction_ready(), which will make reclaim not bail out in step 3, so
there's at least one attempt to actually reclaim, even if chances are
small for a costly order
- in_reclaim_compaction() which will make should_continue_reclaim()
return false and we don't over-reclaim unnecessarily
- in __alloc_pages_slowpath() to set a local variable can_compact,
which is then used to avoid retrying reclaim/compaction for costly
allocations (step 5) if we can't compact and also to skip the early
compaction attempt that we do in some cases
Link: https://lkml.kernel.org/r/20240221114357.13655-2-vbabka@suse.cz
Fixes:
|
||
Kinsey Ho
|
4acef5694e |
mm/mglru: improve swappiness handling
The reclaimable number of anon pages used to set initial reclaim priority is only based on get_swappiness(). Use can_reclaim_anon_pages() to include NUMA node demotion. Also move the swappiness handling of when !__GFP_IO in try_to_shrink_lruvec() into isolate_folios(). Link: https://lkml.kernel.org/r/20240214060538.3524462-6-kinseyho@google.com Signed-off-by: Kinsey Ho <kinseyho@google.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Donet Tom <donettom@linux.vnet.ibm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kinsey Ho
|
cc25bbe10a |
mm/mglru: improve struct lru_gen_mm_walk
Rename max_seq to seq in struct lru_gen_mm_walk to keep consistent with struct lru_gen_mm_state. Note that seq is not always up to date with max_seq from lru_gen_folio. No functional changes. Link: https://lkml.kernel.org/r/20240214060538.3524462-5-kinseyho@google.com Signed-off-by: Kinsey Ho <kinseyho@google.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Donet Tom <donettom@linux.vnet.ibm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kinsey Ho
|
2d823764fa |
mm/mglru: improve reset_mm_stats()
struct lruvec* is already a field of struct lru_gen_mm_walk. Remove the parameter struct lruvec* into functions that already have access to struct lru_gen_mm_walk*. Also, we do not need to handle reset histogram stats when !should_walk_mmu(). Remove the call to reset_mm_stats() in iterate_mm_list_nowalk(). Link: https://lkml.kernel.org/r/20240214060538.3524462-4-kinseyho@google.com Signed-off-by: Kinsey Ho <kinseyho@google.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Donet Tom <donettom@linux.vnet.ibm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kinsey Ho
|
51973cc9e5 |
mm/mglru: improve should_run_aging()
scan_control *sc does not need to be passed into should_run_aging(), as it provides only the reclaim priority. This can be moved to get_nr_to_scan(). Refactor should_run_aging() and get_nr_to_scan() to improve code readability. No functional changes. Link: https://lkml.kernel.org/r/20240214060538.3524462-3-kinseyho@google.com Signed-off-by: Kinsey Ho <kinseyho@google.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Donet Tom <donettom@linux.vnet.ibm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kinsey Ho
|
1ce2292c14 |
mm/mglru: drop unused parameter
Patch series "mm/mglru: code cleanup and refactoring" This provides MGLRU code cleanup and refactoring for better readability. This patch (of 5): struct scan_control *sc is currently passed into try_to_inc_max_seq() and run_aging(). This parameter is not used. Drop the unused parameter struct scan_control *sc. No functional change. Link: https://lkml.kernel.org/r/20240214060538.3524462-1-kinseyho@google.com Link: https://lkml.kernel.org/r/20240214060538.3524462-2-kinseyho@google.com Signed-off-by: Kinsey Ho <kinseyho@google.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Donet Tom <donettom@linux.vnet.ibm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Hao Ge
|
9814171852 |
mm/vmscan: make too_many_isolated return bool
too_many_isolated() should return bool as does the similar too_many_isolated() in mm/compaction.c. Link: https://lkml.kernel.org/r/20240205042618.108140-1-gehao@kylinos.cn Signed-off-by: Hao Ge <gehao@kylinos.cn> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |