* arm64/for-next/perf:
perf: arm_spe: Print the version of SPE detected
perf: arm_spe: Add support for SPEv1.2 inverted event filtering
perf: Add perf_event_attr::config3
drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable
perf: arm_spe: Support new SPEv1.2/v8.7 'not taken' event
perf: arm_spe: Use new PMSIDR_EL1 register enums
perf: arm_spe: Drop BIT() and use FIELD_GET/PREP accessors
arm64/sysreg: Convert SPE registers to automatic generation
arm64: Drop SYS_ from SPE register defines
perf: arm_spe: Use feature numbering for PMSEVFR_EL1 defines
perf/marvell: Add ACPI support to TAD uncore driver
perf/marvell: Add ACPI support to DDR uncore driver
perf/arm-cmn: Reset DTM_PMU_CONFIG at probe
drivers/perf: hisi: Extract initialization of "cpa_pmu->pmu"
drivers/perf: hisi: Simplify the parameters of hisi_pmu_init()
drivers/perf: hisi: Advertise the PERF_PMU_CAP_NO_EXCLUDE capability
* for-next/sysreg:
: arm64 sysreg and cpufeature fixes/updates
KVM: arm64: Use symbolic definition for ISR_EL1.A
arm64/sysreg: Add definition of ISR_EL1
arm64/sysreg: Add definition for ICC_NMIAR1_EL1
arm64/cpufeature: Remove 4 bit assumption in ARM64_FEATURE_MASK()
arm64/sysreg: Fix errors in 32 bit enumeration values
arm64/cpufeature: Fix field sign for DIT hwcap detection
* for-next/sme:
: SME-related updates
arm64/sme: Optimise SME exit on syscall entry
arm64/sme: Don't use streaming mode to probe the maximum SME VL
arm64/ptrace: Use system_supports_tpidr2() to check for TPIDR2 support
* for-next/kselftest: (23 commits)
: arm64 kselftest fixes and improvements
kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests
kselftest/arm64: Copy whole EXTRA context
kselftest/arm64: Fix enumeration of systems without 128 bit SME for SSVE+ZA
kselftest/arm64: Fix enumeration of systems without 128 bit SME
kselftest/arm64: Don't require FA64 for streaming SVE tests
kselftest/arm64: Limit the maximum VL we try to set via ptrace
kselftest/arm64: Correct buffer size for SME ZA storage
kselftest/arm64: Remove the local NUM_VL definition
kselftest/arm64: Verify simultaneous SSVE and ZA context generation
kselftest/arm64: Verify that SSVE signal context has SVE_SIG_FLAG_SM set
kselftest/arm64: Remove spurious comment from MTE test Makefile
kselftest/arm64: Support build of MTE tests with clang
kselftest/arm64: Initialise current at build time in signal tests
kselftest/arm64: Don't pass headers to the compiler as source
kselftest/arm64: Remove redundant _start labels from FP tests
kselftest/arm64: Fix .pushsection for strings in FP tests
kselftest/arm64: Run BTI selftests on systems without BTI
kselftest/arm64: Fix test numbering when skipping tests
kselftest/arm64: Skip non-power of 2 SVE vector lengths in fp-stress
kselftest/arm64: Only enumerate power of two VLs in syscall-abi
...
* for-next/misc:
: Miscellaneous arm64 updates
arm64/mm: Intercept pfn changes in set_pte_at()
Documentation: arm64: correct spelling
arm64: traps: attempt to dump all instructions
arm64: Apply dynamic shadow call stack patching in two passes
arm64: el2_setup.h: fix spelling typo in comments
arm64: Kconfig: fix spelling
arm64: cpufeature: Use kstrtobool() instead of strtobool()
arm64: Avoid repeated AA64MMFR1_EL1 register read on pagefault path
arm64: make ARCH_FORCE_MAX_ORDER selectable
* for-next/sme2: (23 commits)
: Support for arm64 SME 2 and 2.1
arm64/sme: Fix __finalise_el2 SMEver check
kselftest/arm64: Remove redundant _start labels from zt-test
kselftest/arm64: Add coverage of SME 2 and 2.1 hwcaps
kselftest/arm64: Add coverage of the ZT ptrace regset
kselftest/arm64: Add SME2 coverage to syscall-abi
kselftest/arm64: Add test coverage for ZT register signal frames
kselftest/arm64: Teach the generic signal context validation about ZT
kselftest/arm64: Enumerate SME2 in the signal test utility code
kselftest/arm64: Cover ZT in the FP stress test
kselftest/arm64: Add a stress test program for ZT0
arm64/sme: Add hwcaps for SME 2 and 2.1 features
arm64/sme: Implement ZT0 ptrace support
arm64/sme: Implement signal handling for ZT
arm64/sme: Implement context switching for ZT0
arm64/sme: Provide storage for ZT0
arm64/sme: Add basic enumeration for SME2
arm64/sme: Enable host kernel to access ZT0
arm64/sme: Manually encode ZT0 load and store instructions
arm64/esr: Document ISS for ZT0 being disabled
arm64/sme: Document SME 2 and SME 2.1 ABI
...
* for-next/tpidr2:
: Include TPIDR2 in the signal context
kselftest/arm64: Add test case for TPIDR2 signal frame records
kselftest/arm64: Add TPIDR2 to the set of known signal context records
arm64/signal: Include TPIDR2 in the signal context
arm64/sme: Document ABI for TPIDR2 signal information
* for-next/scs:
: arm64: harden shadow call stack pointer handling
arm64: Stash shadow stack pointer in the task struct on interrupt
arm64: Always load shadow stack pointer directly from the task struct
* for-next/compat-hwcap:
: arm64: Expose compat ARMv8 AArch32 features (HWCAPs)
arm64: Add compat hwcap SSBS
arm64: Add compat hwcap SB
arm64: Add compat hwcap I8MM
arm64: Add compat hwcap ASIMDBF16
arm64: Add compat hwcap ASIMDFHM
arm64: Add compat hwcap ASIMDDP
arm64: Add compat hwcap FPHP and ASIMDHP
* for-next/ftrace:
: Add arm64 support for DYNAMICE_FTRACE_WITH_CALL_OPS
arm64: avoid executing padding bytes during kexec / hibernation
arm64: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS
arm64: ftrace: Update stale comment
arm64: patching: Add aarch64_insn_write_literal_u64()
arm64: insn: Add helpers for BTI
arm64: Extend support for CONFIG_FUNCTION_ALIGNMENT
ACPI: Don't build ACPICA with '-Os'
Compiler attributes: GCC cold function alignment workarounds
ftrace: Add DYNAMIC_FTRACE_WITH_CALL_OPS
* for-next/efi-boot-mmu-on:
: Permit arm64 EFI boot with MMU and caches on
arm64: kprobes: Drop ID map text from kprobes blacklist
arm64: head: Switch endianness before populating the ID map
efi: arm64: enter with MMU and caches enabled
arm64: head: Clean the ID map and the HYP text to the PoC if needed
arm64: head: avoid cache invalidation when entering with the MMU on
arm64: head: record the MMU state at primary entry
arm64: kernel: move identity map out of .text mapping
arm64: head: Move all finalise_el2 calls to after __enable_mmu
* for-next/ptrauth:
: arm64 pointer authentication cleanup
arm64: pauth: don't sign leaf functions
arm64: unify asm-arch manipulation
* for-next/pseudo-nmi:
: Pseudo-NMI code generation optimisations
arm64: irqflags: use alternative branches for pseudo-NMI logic
arm64: add ARM64_HAS_GIC_PRIO_RELAXED_SYNC cpucap
arm64: make ARM64_HAS_GIC_PRIO_MASKING depend on ARM64_HAS_GIC_CPUIF_SYSREGS
arm64: rename ARM64_HAS_IRQ_PRIO_MASKING to ARM64_HAS_GIC_PRIO_MASKING
arm64: rename ARM64_HAS_SYSREG_GIC_CPUIF to ARM64_HAS_GIC_CPUIF_SYSREGS
During early development a dependedncy was added on having FA64
available so we could use the full FPSIMD register set in the signal
handler which got copied over into the SSVE+ZA registers test case.
Subsequently the ABI was finialised so the handler is run with streaming
mode disabled meaning this is redundant but the dependency was never
removed, do so now.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230202-arm64-kselftest-sve-za-fa64-v1-1-5c5f3dabe441@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When copying the EXTRA context our calculation of the amount of data we
need to copy is incorrect, we only calculate the amount of data needed
within uc_mcontext.__reserved, not taking account of the fixed portion
of the context. Add in the offset of the reserved data so that we copy
everything we should.
This will only cause test failures in cases where the last context in the
EXTRA context is smaller than the missing data since we don't currently
validate any of the register data and all the buffers we copy into are
statically allocated so default to zero meaning that if we walk beyond the
end of what we copied we'll encounter what looks like a context with magic
and length both 0 which is a valid terminator record.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230201-arm64-kselftest-full-extra-v1-1-93741f32dd29@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The current signal handling tests for SME do not account for the fact that
unlike SVE all SME vector lengths are optional so we can't guarantee that
we will encounter the minimum possible VL, they will hang enumerating VLs
on such systems. Abort enumeration when we find the lowest VL in the newly
added ssve_za_regs test.
Fixes: bc69da5ff0 ("kselftest/arm64: Verify simultaneous SSVE and ZA context generation")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230131-arm64-kselftest-sig-sme-no-128-v1-2-d47c13dc8e1e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The current signal handling tests for SME do not account for the fact that
unlike SVE all SME vector lengths are optional so we can't guarantee that
we will encounter the minimum possible VL, they will hang enumerating VLs
on such systems. Abort enumeration when we find the lowest VL.
Fixes: 4963aeb35a ("kselftest/arm64: signal: Add SME signal handling tests")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230131-arm64-kselftest-sig-sme-no-128-v1-1-d47c13dc8e1e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
During early development a dependedncy was added on having FA64
available so we could use the full FPSIMD register set in the signal
handler. Subsequently the ABI was finialised so the handler is run with
streaming mode disabled meaning this is redundant but the dependency was
never removed, do so now.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230131-arm64-kselfetest-ssve-fa64-v1-1-f418efcc2b60@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The newly added zt-test program copied the pattern from the other FP
stress test programs of having a redundant _start label which is
rejected by clang, as we did in a parallel series for the other tests
remove the label so we can build with clang.
No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230130-arm64-fix-sme2-clang-v1-1-3ce81d99ea8f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When SVE was initially merged we chose to export the maximum VQ in the ABI
as being 512, rather more than the architecturally supported maximum of 16.
For the ptrace tests this results in us generating a lot of test cases and
hence log output which are redundant since a system couldn't possibly
support them. Instead only check values up to the current architectural
limit, plus one more so that we're covering the constraining of higher
vector lengths.
This makes no practical difference to our test coverage, speeds things up
on slower consoles and makes the output much more managable.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230111-arm64-kselftest-ptrace-max-vl-v1-1-8167f41d1ad8@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
It looks like a copy-paste error to describe the ZA buffer size using (the
number of P registers * the maximum size of a Z register). This doesn't
have practical impact though as we're always allocating enough space even
for the architectural maximum ZA storage, with SVL equals to 2048 bits.
Switch to use ZA_SIG_REGS_SIZE(SVE_VQ_MAX). setup_za() will need to
initialize two 64MB arraies with this change and can be optimized later (if
someone complain).
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221218092942.1940-2-yuzenghui@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
It was introduced in commit b77e995e3b ("kselftest/arm64: Add a test
program to exercise the syscall ABI") but never actually used. Remove it.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221218092942.1940-1-yuzenghui@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add a test that generates SSVE and ZA context in a single signal frame to
ensure that nothing is going wrong in that case for any reason.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230117-arm64-test-ssve-za-v1-2-203c00150154@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
There's a stray comment in the MTE test Makefile which documents
something that's since been removed, delete it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230111-arm64-kselftest-clang-v1-6-89c69d377727@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The assembly portions of the MTE selftests need to be built with a
toolchain supporting MTE. Since we support GCC versions that lack MTE
support we have logic to suppress build of these tests when using such a
toolchain but that logic is broken for LLVM=1 builds, it uses CC but CC
is only set for LLVM builds in libs.mk which needs to be included after
we have selected which test programs to build.
Since all supported LLVM versions support MTE we can simply assume MTE
support when LLVM is set. This is not a thing of beauty but it does the
job.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230111-arm64-kselftest-clang-v1-5-89c69d377727@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When building with clang the toolchain refuses to link the signals
testcases since the assembly code has a reference to current which has
no initialiser so is placed in the BSS:
/tmp/signals-af2042.o: in function `fake_sigreturn':
<unknown>:51:(.text+0x40): relocation truncated to fit: R_AARCH64_LD_PREL_LO19 against symbol `current' defined in .bss section in /tmp/test_signals-ec1160.o
Since the first statement in main() initialises current we may as well
fix this by moving the initialisation to build time so the variable
doesn't end up in the BSS.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230111-arm64-kselftest-clang-v1-4-89c69d377727@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The signal Makefile rules pass all the dependencies for each executable,
including headers, to the compiler which GCC is happy enough with but
clang rejects:
clang --target=aarch64-none-linux-gnu -fintegrated-as -Wall -O2 -g -I/home/broonie/git/linux/tools/testing/selftests/ -isystem /home/broonie/git/linux/usr/include -D_GNU_SOURCE -std=gnu99 -I. test_signals.c test_signals_utils.c testcases/testcases.c signals.S testcases/fake_sigreturn_bad_magic.c test_signals.h test_signals_utils.h testcases/testcases.h -o testcases/fake_sigreturn_bad_magic
clang: error: cannot specify -o when generating multiple output files
This happens because clang gets confused about what to do with the
header files, failing to identify them as source. This is not amazing
behaviour on clang's part and should ideally be fixed but even if that
happens we'd still need a new clang release so let's instead rework the
Makefile so we use variables for the lists of header and source files,
allowing us to only pass the source files to the compiler and keep clang
happy.
As a bonus the resulting Makefile is a bit easier to read.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230111-arm64-kselftest-clang-v1-3-89c69d377727@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
There are a number of freestanding static executables used in floating
point testing that have no runtime at all. These all define the main entry
point as:
.globl _start
function _start
_start:
but clang's integrated assembler complains that:
error: symbol '_start' is already defined
due to having both a label and function directive. Remove the label to
allow building with clang.
No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230111-arm64-kselftest-clang-v1-2-89c69d377727@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The .pushsection directive used to store the strings used with the .puts
macro in the floating point helpers does not provide a section type but
according to the gas documentation this should be mandatory and with the
clang built in as it actually is. Provide one so that we can build these
tests with LLVM=1.
No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230111-arm64-kselftest-clang-v1-1-89c69d377727@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Ensure that we get signal context for TPIDR2 if and only if SME is present
on the system. Since TPIDR2 is owned by libc we merely validate that the
value is whatever it was set to, this isn't ideal since it's likely to
just be the default of 0 with current systems but it avoids future false
positives.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-arm64-tpidr2-sig-v3-4-c77c6c8775f4@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When validating the set of signal context records check that any TPIDR2
record has the correct size, also suppressing warnings due to seeing an
unknown record type.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-arm64-tpidr2-sig-v3-3-c77c6c8775f4@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We should have a ZT register frame with an expected size when ZA is enabled
and have no ZT frame when ZA is disabled. Since we don't load any data into
ZT we expect the data to all be zeros since the architecture guarantees it
will be set to 0 as ZA is enabled.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-arm64-sme2-v4-18-f2fa0aef982f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Following the pattern for the other register sets add a stress test program
for ZT0 which continually loads and verifies patterns in the register in
an effort to discover context switching problems.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-arm64-sme2-v4-14-f2fa0aef982f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The BTI selftests are built both with and without BTI support, validating
both the generation of BTI signals as expected for binaries without BTI
support. Both versions of the binary currently skip all their tests when
the system does not support BTI, however this is excessive since we do have
a defined ABI for how the programs should function in this case (especially
for the non-BTI binary). Update the test program to run all the tests
unconditionally, adding a runtime adjustment of the expected results on
systems that don't support BTI where we currently handle the build time
case.
The tests all use HINT space instructions, BTI itself is a HINT as is
are the PAC instructions that function as landing pads, so nothing in the
tests depends on support for BTI in the kernel or hardware.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230110-arm64-bti-selftest-skip-v1-2-143ecdc84567@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently when skipping tests in the BTI testsuite we assign the same
number to every test since we forget to increment the current test number
as we skip, causing warnings about not running the expected test count and
potentially otherwise confusing result parsers. Fix this by adding an
appropriate increment.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230110-arm64-bti-selftest-skip-v1-1-143ecdc84567@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As documented in issue C215 in the known issues list for DDI0487I.a [1] Arm
will be making a retroactive change to SVE to remove the possibility of
selecting non power of two vector lengths. This has no impact on existing
physical implementations but most virtual implementations have implemented
the full range of permissible vector lengths. Given how demanding fp-stress
is for these implementations update to only attempt to enumerate the power
of two vector lengths, reducing the load created on existing virtual
implementations and only exercising the functionality that will be seen in
physical implementations.
[1] https://developer.arm.com/documentation/102105/ia-00/
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221220-arm64-fp-stress-pow2-v1-1-d0ce756b57af@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As documented in issue C215 in the known issues list for DDI0487I.a [1] Arm
will be making a retroactive change to SVE to remove the possibility of
selecting non power of two vector lengths. This has no impact on existing
physical implementations but most virtual implementations have implemented
the full range of permissible vector lengths.
Since virtual implementations are noticeably slow in general and the larger
vector lengths amplify the issue there's a useful improvement in runtime
from only covering the vector lengths that will exist in practical systems,
adjust our enumeration accordingly. We have other tests that aim to cover
the enumeration interfaces.
For symmetry we apply the same change to the eumeration for SME vector
lengths, though the power of two restriction was already present for SME
so there is no impact on the set of vector lengths tested.
[1] https://developer.arm.com/documentation/102105/ia-00/
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221223-arm64-syscall-abi-sme-only-v1-4-4fabfbd62087@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently syscall-abi only covers SME in the case where the system supports
SVE however it is architecturally valid to support SME without SVE. Update
the program to cover this case, this requires adjustments in the code to
check for SVCR.SM being set when deciding if we're handling the FPSIMD or
SVE registers and the addition of new test cases for the SME only case.
Note that in the SME only case we should not save the SVE registers after a
syscall since even if we were in streaming mode and therefore set them the
syscall should have exited streaming mode, we check that we have done so by
looking at SVCR.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221223-arm64-syscall-abi-sme-only-v1-3-4fabfbd62087@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently syscall-abi not only enumerates the SVE VLs twice while working
out how many tests are planned, it also repeats the enumeration process
while doing the actual tests. Record the VLs when we enumerate and use that
list when we are performing the tests, removing some duplicated logic.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221223-arm64-syscall-abi-sme-only-v1-2-4fabfbd62087@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
SME does not mandate any specific VL so we may not have 128 bit SME but
the algorithm used for enumerating VLs assumes that we will. Add the
required check to ensure that the algorithm terminates.
Fixes: 43e3f85523 ("kselftest/arm64: Add SME support to syscall ABI test")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221223-arm64-syscall-abi-sme-only-v1-1-4fabfbd62087@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* Fix kernel-doc for memblock_phys_free() to use correct names for the
counterpart allocation methods
* Fix compilation error in memblock tests
-----BEGIN PGP SIGNATURE-----
iQFMBAABCAA2FiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmO6bMYYHG1pa2UucmFw
b3BvcnRAZ21haWwuY29tAAoJEDkDhibLDv2RUt8H/Ayh8cO8kpKbJ2jH9eFwba6T
JPOv5P3hjKHbY+NMGG9MfAUTMw6Lxa59EiC+xGyPFWrtt/ZpKgaaBznxSC7dkVYy
XarzK3zulZmL4BdjBQearXXj5gSkZnuEHb9Pjs19GLDnGoRJczoHYG6rXlAWh1sg
w4H4g4QyHKYqqUlnbDi0GTIaaKY76Uprw6x6w8xwtmdUw9+1edqnoN9fRJxY9AwM
7ez7FR6rJ5g7AgcLfa/dTaCZgloLPKVdMI+q29lBXM5xDrUpxeEfXg5iU7Hax+rT
4o43HXGVGyiuWYlgdWd9B18M4Xma55K1Q+cQ3cELsAvq7XACvQcA6xi0QnFfgpU=
=DNKq
-----END PGP SIGNATURE-----
Merge tag 'fixes-2023-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
"Small fixes in kernel-doc and tests:
- Fix kernel-doc for memblock_phys_free() to use correct names for
the counterpart allocation methods
- Fix compilation error in memblock tests"
* tag 'fixes-2023-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Fix doc for memblock_phys_free
memblock tests: Fix compilation error.
- Fix segfault when trying to process tracepoints present in a perf.data file
and not linked with libtraceevent.
- Fix build on uClibc systems by adding missing sys/types.h include, that was
being obtained indirectly which stopped being the case when tools/lib/traceevent
was removed.
- Don't show commands in 'perf help' that depend on linking with libtraceevent
when not building with that library, which is now a possibility since we
no longer ship a copy in tools/lib/traceevent.
- Fix failure in 'perf test' entry testing the combination of 'perf probe' user
space function + 'perf record' + 'perf script' where it expects a backtrace
leading to glibc's inet_pton() from 'ping' that now happens more than once with
glibc 2.35 for IPv6 addreses.
- Fix for the inet_pton perf test on s/390 where 'text_to_binary_address' now
appears on the backtrace.
- Fix build error on riscv due to missing header for 'struct perf_sample'.
- Fix 'make -C tools perf_install' install variant by not propagating the 'subdir'
to submakes for the 'install_headers' targets.
- Fix handling of unsupported cgroup events when using BPF counters in 'perf stat'.
- Count all cgroups, not just the last one when using 'perf stat
--for-each-cgroup' with --bpf-counters. This makes the output using BPF
counters match the output without using it, which was the intention all along,
the output should be the same using --bpf-counters or not.
- Fix 'perf lock contention' core dump related to not finding the
"__sched_text_end" symbol on s/390.
- Fix build failure when HEAD is signed: exclude the signature from the version
string.
- Add missing closedir() calls to in perf_data__open_dir(), plugging a fd leak.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCY7hWpQAKCRCyPKLppCJ+
J4UvAQDru5hkxelbwP0keDjfIn68Iz5HUOe7BTNNzexLUsEfDQD/YA31CuZzTxh3
3qt8nyfFr1vwzgKAUFx2873jgi5+IQE=
=n5PI
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.2-1-2023-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix segfault when trying to process tracepoints present in a
perf.data file and not linked with libtraceevent.
- Fix build on uClibc systems by adding missing sys/types.h include,
that was being obtained indirectly which stopped being the case when
tools/lib/traceevent was removed.
- Don't show commands in 'perf help' that depend on linking with
libtraceevent when not building with that library, which is now a
possibility since we no longer ship a copy in tools/lib/traceevent.
- Fix failure in 'perf test' entry testing the combination of 'perf
probe' user space function + 'perf record' + 'perf script' where it
expects a backtrace leading to glibc's inet_pton() from 'ping' that
now happens more than once with glibc 2.35 for IPv6 addreses.
- Fix for the inet_pton perf test on s/390 where
'text_to_binary_address' now appears on the backtrace.
- Fix build error on riscv due to missing header for 'struct
perf_sample'.
- Fix 'make -C tools perf_install' install variant by not propagating
the 'subdir' to submakes for the 'install_headers' targets.
- Fix handling of unsupported cgroup events when using BPF counters in
'perf stat'.
- Count all cgroups, not just the last one when using 'perf stat' and
combining --for-each-cgroup with --bpf-counters.
This makes the output using BPF counters match the output without
using it, which was the intention all along, the output should be the
same using --bpf-counters or not.
- Fix 'perf lock contention' core dump related to not finding the
"__sched_text_end" symbol on s/390.
- Fix build failure when HEAD is signed: exclude the signature from the
version string.
- Add missing closedir() calls to in perf_data__open_dir(), plugging a
fd leak.
* tag 'perf-tools-fixes-for-v6.2-1-2023-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Fix build on uClibc systems by adding missing sys/types.h include
perf stat: Fix handling of --for-each-cgroup with --bpf-counters to match non BPF mode
perf stat: Fix handling of unsupported cgroup events when using BPF counters
perf test record_probe_libc_inet_pton: Fix test on s/390 where 'text_to_binary_address' now appears on the backtrace
perf lock contention: Fix core dump related to not finding the "__sched_text_end" symbol on s/390
perf build: Don't propagate subdir to submakes for install_headers
perf test record_probe_libc_inet_pton: Fix failure due to extra inet_pton() backtrace in glibc >= 2.35
perf tools: Fix segfault when trying to process tracepoints in perf.data and not linked with libtraceevent
perf tools: Don't include signature in version strings
perf help: Use HAVE_LIBTRACEEVENT to filter out unsupported commands
perf tools riscv: Fix build error on riscv due to missing header for 'struct perf_sample'
perf tools: Fix resources leak in perf_data__open_dir()
Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons,
avoid null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught
by Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch
and kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal document
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TlcN
-----END PGP SIGNATURE-----
Merge tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, wifi, and netfilter.
Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons, avoid
null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught by
Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized
descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch and
kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with
WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal
document"
* tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
caif: fix memory leak in cfctrl_linkup_request()
inet: control sockets should not use current thread task_frag
net/ulp: prevent ULP without clone op from entering the LISTEN status
qed: allow sleep in qed_mcp_trace_dump()
MAINTAINERS: Update maintainers for ptp_vmw driver
usb: rndis_host: Secure rndis_query check against int overflow
net: dpaa: Fix dtsec check for PCS availability
octeontx2-pf: Fix lmtst ID used in aura free
drivers/net/bonding/bond_3ad: return when there's no aggregator
netfilter: ipset: Rework long task execution when adding/deleting entries
netfilter: ipset: fix hash:net,port,net hang with /0 subnet
net: sparx5: Fix reading of the MAC address
vxlan: Fix memory leaks in error path
net: sched: htb: fix htb_classify() kernel-doc
net: sched: cbq: dont intepret cls results when asked to drop
net: sched: atm: dont intepret cls results when asked to drop
dt-bindings: net: marvell,orion-mdio: Fix examples
dt-bindings: net: sun8i-emac: Add phy-supply property
net: ipa: use proper endpoint mask for suspend
selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier
...
-----BEGIN PGP SIGNATURE-----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=vD3D
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:
====================
bpf 2023-01-04
We've added 5 non-merge commits during the last 8 day(s) which contain
a total of 5 files changed, 112 insertions(+), 18 deletions(-).
The main changes are:
1) Always use maximal size for copy_array in the verifier to fix
KASAN tracking, from Kees.
2) Fix bpf task iterator walking through dead tasks, from Kui-Feng.
3) Make sure livepatch and bpf fexit can coexist, from Chuang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Always use maximal size for copy_array()
selftests/bpf: add a test for iter/task_vma for short-lived processes
bpf: keep a reference to the mm, in case the task is dead.
selftests/bpf: Temporarily disable part of btf_dump:var_data test.
bpf: Fix panic due to wrong pageattr of im->image
====================
Link: https://lore.kernel.org/r/20230104215500.79435-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mostly fixes all over the place, a couple of cleanups.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmOsSY4PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpnEoH/i7iGllhlBKKula2o97CixSWqMYY7ncryfTN
c3F3Wjk4imlhR8Je7n+xmDPLoE9vFkKdZL6o7kIESCJfNjCQ6r6Rnl8LoHkOZhvj
oLJ8zUfbOa5+B5kzOdnh2WV+3uNkssjayTrozvkDQ4r9MeSVRaC/xZ+lz85PQ+c7
FaNNyT2G+fZ6HoQg5U+Q+bj2lqxP9FYKMqURWGxUqa/gIMmky6VJeUQvmVdQuzCq
cHR48USpn8WE7j8uTf6yCQQuCElOQo1j7Op3FPyaNR3bPWbgzjvOnPci+giQ6hJ5
OAKxJ6HX0ApqcpPoPaA+Qg43EAha+Cu7kw4I58J0U09nQIf/N9w=
=4CJb
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Mostly fixes all over the place, a couple of cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (32 commits)
virtio_blk: Fix signedness bug in virtblk_prep_rq()
vdpa_sim_net: should not drop the multicast/broadcast packet
vdpasim: fix memory leak when freeing IOTLBs
vdpa: conditionally fill max max queue pair for stats
vdpa/vp_vdpa: fix kfree a wrong pointer in vp_vdpa_remove
vduse: Validate vq_num in vduse_validate_config()
tools/virtio: remove smp_read_barrier_depends()
tools/virtio: remove stray characters
vhost_vdpa: fix the crash in unmap a large memory
virtio: Implementing attribute show with sysfs_emit
virtio-crypto: fix memory leak in virtio_crypto_alg_skcipher_close_session()
tools/virtio: Variable type completion
vdpa_sim: fix vringh initialization in vdpasim_queue_ready()
virtio_blk: use UINT_MAX instead of -1U
vhost-vdpa: fix an iotlb memory leak
vhost: fix range used in translate_desc()
vringh: fix range used in iotlb_translate()
vhost/vsock: Fix error handling in vhost_vsock_init()
vdpa_sim: fix possible memory leak in vdpasim_net_init() and vdpasim_blk_init()
tools: Delete the unneeded semicolon after curly braces
...
Not all libc implementations define ssize_t as part of stdio.h like
glibc does since the standard only requires this type to be defined by
unistd.h and sys/types.h. For this reason the perf build is currently
broken for toolchains based on uClibc, for instance.
Include sys/types.h explicitly to fix that.
Committer notes:
In addition, in the past this worked in uClibc test systems as there was
another way to get to sys/types.h that got removed in that cset:
tools/perf/util/trace-event.h
/usr/include/traceevent/event_parse.h # This got removed from util/trace-event.h in 378ef0f5d9
/usr/include/regex.h
/usr/include/sys/types.h
typedef __ssize_t ssize_t;
So the size_t that is used in tools/perf/util/trace-event.h was being
obtained indirectly, by chance.
Fixes: 378ef0f5d9 ("perf build: Use libtraceevent from the system")
Signed-off-by: Jesus Sanchez-Palencia <jesussanp@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20230104193414.606905-1-jesussanp@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --for-each-cgroup can have the same cgroup multiple times, but this
confuses BPF counters (since they have the same cgroup id), making only
the last cgroup events to be counted.
Let's check the cgroup name before adding a new entry to the cgroups
list.
Before:
$ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Performance counter stats for 'system wide':
<not counted> msec cpu-clock /
<not counted> context-switches /
<not counted> cpu-migrations /
<not counted> page-faults /
<not counted> cycles /
<not counted> instructions /
<not counted> branches /
<not counted> branch-misses /
8,016.04 msec cpu-clock / # 7.998 CPUs utilized
6,152 context-switches / # 767.461 /sec
250 cpu-migrations / # 31.187 /sec
442 page-faults / # 55.139 /sec
613,111,487 cycles / # 0.076 GHz
280,599,604 instructions / # 0.46 insn per cycle
57,692,724 branches / # 7.197 M/sec
3,385,168 branch-misses / # 5.87% of all branches
1.002220125 seconds time elapsed
After it becomes similar to the non-BPF mode:
$ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Performance counter stats for 'system wide':
8,013.38 msec cpu-clock / # 7.998 CPUs utilized
6,859 context-switches / # 855.944 /sec
334 cpu-migrations / # 41.680 /sec
345 page-faults / # 43.053 /sec
782,326,119 cycles / # 0.098 GHz
471,645,724 instructions / # 0.60 insn per cycle
94,963,430 branches / # 11.851 M/sec
3,685,511 branch-misses / # 3.88% of all branches
1.001864539 seconds time elapsed
Committer notes:
As a reminder, to test with BPF counters one has to use BUILD_BPF_SKEL=1
in the make command line and have clang/llvm installed when building
perf, otherwise the --bpf-counters option will not be available:
# perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Error: unknown option `bpf-counters'
Usage: perf stat [<options>] [<command>]
-a, --all-cpus system-wide collection from all CPUs
<SNIP>
#
Fixes: bb1c15b60b ("perf stat: Support regex pattern in --for-each-cgroup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: bpf@vger.kernel.org
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20230104064402.1551516-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When --for-each-cgroup option is used, it fails when any of events is
not supported and exits immediately. This is not how 'perf stat'
handles unsupported events.
Let's ignore the failure and proceed with others so that the output is
similar to when BPF counters are not used:
Before:
$ sudo ./perf stat -a --bpf-counters -e L1-icache-loads,L1-dcache-loads --for-each-cgroup system.slice,user.slice sleep 1
Failed to open first cgroup events
$
After it shows output similat to when --bpf-counters isn't specified:
$ sudo ./perf stat -a --bpf-counters -e L1-icache-loads,L1-dcache-loads --for-each-cgroup system.slice,user.slice sleep 1
Performance counter stats for 'system wide':
<not supported> L1-icache-loads system.slice
29,892,418 L1-dcache-loads system.slice
<not supported> L1-icache-loads user.slice
52,497,220 L1-dcache-loads user.slice
$
Fixes: 944138f048 ("perf stat: Enable BPF counter with --for-each-cgroup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20230104064402.1551516-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf test '84: probe libc's inet_pton & backtrace it with ping' fails on
s390. Debugging revealed a changed stack trace for the ping command
using probes:
ping 35729 [002] 8006.365063: probe_libc:inet_pton: (3ff9603e7c0)
13e7c0 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
---> 104371 text_to_binary_address+0xef1 (inlined)
104371 gaih_inet+0xef1 (inlined)
104371 __GI_getaddrinfo+0xef1 (inlined)
5d4b main+0x139b (/usr/bin/ping)
The line "---> text_to_binary_address ..." is new. It was introduced
with glibc version 2.36.7.2 released with Fedora 37 for s390.
Output before
# perf test inet_pton
84: probe libc's inet_pton & backtrace it with ping : FAILED!
#
Output after:
# perf test inet_pton
84: probe libc's inet_pton & backtrace it with ping : Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20221228145704.2702487-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit cf4694be2b ("tools: Add atomic_test_and_set_bit()") changed
tools/arch/x86/include/asm/atomic.h to include <asm/asm.h>, which causes
'make -C tools/testing/memblock' to fail with:
In file included from ../../include/asm/atomic.h:6,
from ../../include/linux/atomic.h:5,
from ./linux/mmzone.h:5,
from ../../include/linux/mm.h:5,
from ../../include/linux/pfn.h:5,
from ./linux/memory_hotplug.h:6,
from ./linux/init.h:7,
from ./linux/memblock.h:11,
from tests/common.h:8,
from tests/basic_api.h:5,
from main.c:2:
../../include/asm/../../arch/x86/include/asm/atomic.h:11:10: fatal error: asm/asm.h: No such file or directory
11 | #include <asm/asm.h>
| ^~~~~~~~~~~
Create a symlink to asm/asm.h in the same manner as the existing one to
asm/cmpxchg.h.
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/010101857c402765-96e2dbc6-b82b-47e2-a437-4834dbe0b96b-000000@us-west-2.amazonses.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
The test case perf lock contention dumps core on s390. Run the following
commands:
# ./perf lock record -- ./perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 2.799 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.073 MB perf.data (100 samples) ]
#
# ./perf lock contention
Segmentation fault (core dumped)
#
The function call stack is lengthy, here are the top 5 functions:
# gdb ./perf core.24048
GNU gdb (GDB) Fedora Linux 12.1-6.fc37
Core was generated by `./perf lock contention'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28, addr=1789230) at util/machine.c:3356
3356 machine->sched.text_end = kmap->unmap_ip(kmap, sym->start);
(gdb) where
#0 0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28, addr=1789230) at util/machine.c:3356
#1 0x000000000109f244 in callchain_id (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:957
#2 0x000000000109e094 in get_key_by_aggr_mode (key=0x3ffea4f7290, addr=27758136, evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:586
#3 0x000000000109f4d0 in report_lock_contention_begin_event (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:1004
#4 0x00000000010a00ae in evsel__process_contention_begin (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:1254
#5 0x00000000010a0e14 in process_sample_event (tool=0x3ffea4f8480, event=0x3ff85601ef8, sample=0x3ffea4f77d0, evsel=0x30313e0, machine=0x3029e28) at builtin-lock.c:1464
.....
The issue is in function machine__is_lock_function() in file
./util/machine.c lines 3355:
/* should not fail from here */
sym = machine__find_kernel_symbol_by_name(machine, "__sched_text_end", &kmap);
machine->sched.text_end = kmap->unmap_ip(kmap, sym->start)
On s390 the symbol __sched_text_end is *NOT* in the symbol list and the
resulting pointer sym is set to NULL. The sym->start is then a NULL pointer
access and generates the core dump.
The reason why __sched_text_end is not in the symbol list on s390 is
simple:
When the symbol list is created at perf start up with function calls
dso__load
+--> dso__load_vmlinux_path
+--> dso__load_vmlinux
+--> dso__load_sym
+--> dso__load_sym_internal (reads kernel symbols)
+--> symbols__fixup_end
+--> symbols__fixup_duplicate
The issue is in function symbols__fixup_duplicate(). It deletes all
symbols with have the same address. On s390:
# nm -g ~/linux/vmlinux| fgrep c68390
0000000000c68390 T __cpuidle_text_start
0000000000c68390 T __sched_text_end
#
two symbols have identical addresses and __sched_text_end is considered
duplicate (in ascending sort order) and removed from the symbol list.
Therefore it is missing and an invalid pointer reference occurs. The
code checks for symbol __sched_text_start and when it exists assumes
symbol __sched_text_end is also in the symbol table. However this is not
the case on s390.
Same situation exists for symbol __lock_text_start:
0000000000c68770 T __cpuidle_text_end
0000000000c68770 T __lock_text_start
This symbol is also removed from the symbol table but used in function
machine__is_lock_function().
To fix this and keep duplicate symbols in the symbol table, set
symbol_conf.allow_aliases to true. This prevents the removal of
duplicate symbols in function symbols__fixup_duplicate().
Output After:
# ./perf lock contention
contended total wait max wait avg wait type caller
48 124.39 ms 123.99 ms 2.59 ms rwsem:W unlink_anon_vmas+0x24a
47 83.68 ms 83.26 ms 1.78 ms rwsem:W free_pgtables+0x132
5 41.22 us 10.55 us 8.24 us rwsem:W free_pgtables+0x140
4 40.12 us 20.55 us 10.03 us rwsem:W copy_process+0x1ac8
#
Fixes: 0d2997f750 ("perf lock: Look up callchain for the contended locks")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20221230102627.2410847-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
subdir is added to the OUTPUT which fails as part of building
install_headers when passed from "make -C tools perf_install".
Committer testing:
The original reporter (see the Link: below) had trouble with this:
$ make -C tools perf_install
That ended up with errors like this:
/var/home/acme/git/perf-urgent/tools/scripts/Makefile.include:17: *** output directory "/var/home/acme/git/perf-urgent/tools/perf/libperf/perf/" does not exist. Stop.
With this patch applied we now get it installed at:
INSTALL /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
As expected:
$ ls -la /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
-rw-r--r--. 1 acme acme 1146 Jan 3 15:42 /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
And if we clean tools with:
$ make -C tools clean
it gets cleaned up:
$ ls -la /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
ls: cannot access '/var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h': No such file or directory
$
Fixes: 746bd29e34 ("perf build: Use tools/lib headers from install path")
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/fa4b3115-d555-3d7f-54d1-018002e99350@secunet.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Starting with glibc 2.35 there are extra inet_pton() calls when doing a
IPv6 ping as in one of the 'perf test' entry, which makes it fail:
# perf test inet_pton
89: probe libc's inet_pton & backtrace it with ping : FAILED!
#
If we look at what this script is expecting (commenting out the removal
of the temporary files in it):
# cat /tmp/expected.aT6
ping[][0-9 \.:]+probe_libc:inet_pton: \([[:xdigit:]]+\)
.*inet_pton\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/libc.so.6|inlined\)$
getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/libc.so.6\)$
.*(\+0x[[:xdigit:]]+|\[unknown\])[[:space:]]\(.*/bin/ping.*\)$
#
And looking at what we are getting out of 'perf script', to match with
the above:
# cat /tmp/perf.script.IUC
ping 623883 [006] 265438.471610: probe_libc:inet_pton: (7f32bcf314c0)
1314c0 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
29510 __libc_start_call_main+0x80 (/usr/lib64/libc.so.6)
ping 623883 [006] 265438.471664: probe_libc:inet_pton: (7f32bcf314c0)
1314c0 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
fa6c6 getaddrinfo+0x126 (/usr/lib64/libc.so.6)
491e [unknown] (/usr/bin/ping)
#
We see that its just the first call to inet_pton() that didn't came thru
getaddrinfo(), so if we ignore the first the script matches what it
expects, testing that using 'perf probe' + 'perf record' + 'perf script'
with callchains on userspace targets is producing the expected results.
Since we don't have a 'perf script --skip' to help us here, use tac +
grep to do that, resulting in a one liner that makes this script work on
both older glibc versions as well as with 2.35.
With it, on fedora 36, x86, glibc 2.35:
# perf test inet_pton
90: probe libc's inet_pton & backtrace it with ping : Ok
# perf test -v inet_pton
90: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 627197
ping 627220 1 267956.962402: probe_libc:inet_pton_1: (7f488bf314c0)
1314c0 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
fa6c6 getaddrinfo+0x126 (/usr/lib64/libc.so.6)
491e n (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
#
And on Ubuntu 22.04.1 LTS on a Libre Computer ROC-RK3399-PC arm64 system:
Before this patch it works (see that the script used has no 'tac' to
remove the first event):
root@roc-rk3399-pc:~# dpkg -l | grep libc-bin
ii libc-bin 2.35-0ubuntu3.1 arm64 GNU C Library: Binaries
root@roc-rk3399-pc:~# grep -w tac ~acme/libexec/perf-core/tests/shell/record+probe_libc_inet_pton.sh
root@roc-rk3399-pc:~# perf test inet_pton
86: probe libc's inet_pton & backtrace it with ping : Ok
root@roc-rk3399-pc:~# perf test -v inet_pton
86: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 1375
ping 1399 [000] 4114.417450: probe_libc:inet_pton: (ffffb3e26120)
106120 inet_pton+0x0 (/usr/lib/aarch64-linux-gnu/libc.so.6)
d18bc getaddrinfo+0xec (/usr/lib/aarch64-linux-gnu/libc.so.6)
2b68 [unknown] (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
root@roc-rk3399-pc:~#
And after it continues to work:
root@roc-rk3399-pc:~# grep -w tac ~acme/libexec/perf-core/tests/shell/record+probe_libc_inet_pton.sh
perf script -i $perf_data | tac | grep -m1 ^ping -B9 | tac > $perf_script
root@roc-rk3399-pc:~# perf test inet_pton
86: probe libc's inet_pton & backtrace it with ping : Ok
root@roc-rk3399-pc:~# perf test -v inet_pton
86: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 6995
ping 7019 [005] 4832.160741: probe_libc:inet_pton: (ffffa62e6120)
106120 inet_pton+0x0 (/usr/lib/aarch64-linux-gnu/libc.so.6)
d18bc getaddrinfo+0xec (/usr/lib/aarch64-linux-gnu/libc.so.6)
2b68 [unknown] (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
root@roc-rk3399-pc:~#
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/Y7QyPkPlDYip3cZH@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we have a perf.data file with tracepoints, such as:
# perf evlist -f
probe_perf:lzma_decompress_to_file
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
#
We end up segfaulting when using perf built with NO_LIBTRACEEVENT=1 by
trying to find an evsel with a NULL 'event_name' variable:
(gdb) run report --stdio -f
Starting program: /root/bin/perf report --stdio -f
Program received signal SIGSEGV, Segmentation fault.
0x000000000055219d in find_evsel (evlist=0xfda7b0, event_name=0x0) at util/sort.c:2830
warning: Source file is more recent than executable.
2830 if (event_name[0] == '%') {
Missing separate debuginfos, use: dnf debuginfo-install bzip2-libs-1.0.8-11.fc36.x86_64 cyrus-sasl-lib-2.1.27-18.fc36.x86_64 elfutils-debuginfod-client-0.188-3.fc36.x86_64 elfutils-libelf-0.188-3.fc36.x86_64 elfutils-libs-0.188-3.fc36.x86_64 glibc-2.35-20.fc36.x86_64 keyutils-libs-1.6.1-4.fc36.x86_64 krb5-libs-1.19.2-12.fc36.x86_64 libbrotli-1.0.9-7.fc36.x86_64 libcap-2.48-4.fc36.x86_64 libcom_err-1.46.5-2.fc36.x86_64 libcurl-7.82.0-12.fc36.x86_64 libevent-2.1.12-6.fc36.x86_64 libgcc-12.2.1-4.fc36.x86_64 libidn2-2.3.4-1.fc36.x86_64 libnghttp2-1.51.0-1.fc36.x86_64 libpsl-0.21.1-5.fc36.x86_64 libselinux-3.3-4.fc36.x86_64 libssh-0.9.6-4.fc36.x86_64 libstdc++-12.2.1-4.fc36.x86_64 libunistring-1.0-1.fc36.x86_64 libunwind-1.6.2-2.fc36.x86_64 libxcrypt-4.4.33-4.fc36.x86_64 libzstd-1.5.2-2.fc36.x86_64 numactl-libs-2.0.14-5.fc36.x86_64 opencsd-1.2.0-1.fc36.x86_64 openldap-2.6.3-1.fc36.x86_64 openssl-libs-3.0.5-2.fc36.x86_64 slang-2.3.2-11.fc36.x86_64 xz-libs-5.2.5-9.fc36.x86_64 zlib-1.2.11-33.fc36.x86_64
(gdb) bt
#0 0x000000000055219d in find_evsel (evlist=0xfda7b0, event_name=0x0) at util/sort.c:2830
#1 0x0000000000552416 in add_dynamic_entry (evlist=0xfda7b0, tok=0xffb6eb "trace", level=2) at util/sort.c:2976
#2 0x0000000000552d26 in sort_dimension__add (list=0xf93e00 <perf_hpp_list>, tok=0xffb6eb "trace", evlist=0xfda7b0, level=2) at util/sort.c:3193
#3 0x0000000000552e1c in setup_sort_list (list=0xf93e00 <perf_hpp_list>, str=0xffb6eb "trace", evlist=0xfda7b0) at util/sort.c:3227
#4 0x00000000005532fa in __setup_sorting (evlist=0xfda7b0) at util/sort.c:3381
#5 0x0000000000553cdc in setup_sorting (evlist=0xfda7b0) at util/sort.c:3608
#6 0x000000000042eb9f in cmd_report (argc=0, argv=0x7fffffffe470) at builtin-report.c:1596
#7 0x00000000004aee7e in run_builtin (p=0xf64ca0 <commands+288>, argc=3, argv=0x7fffffffe470) at perf.c:330
#8 0x00000000004af0f2 in handle_internal_command (argc=3, argv=0x7fffffffe470) at perf.c:384
#9 0x00000000004af241 in run_argv (argcp=0x7fffffffe29c, argv=0x7fffffffe290) at perf.c:428
#10 0x00000000004af5fc in main (argc=3, argv=0x7fffffffe470) at perf.c:562
(gdb)
So check if we have tracepoint events in add_dynamic_entry() and bail
out instead:
# perf report --stdio -f
This perf binary isn't linked with libtraceevent, can't process probe_perf:lzma_decompress_to_file
Error:
Unknown --sort key: `trace'
#
Fixes: 378ef0f5d9 ("perf build: Use libtraceevent from the system")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/Y7MDb7kRaHZB6APC@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This explodes the build if HEAD is signed, since the generated version
is gpg: Signature made Mon 26 Dec 2022 20:34:48 CET, then a few more
lines, then the SHA.
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/7c9637711271f50ec2341fb8a7c29585335dab04.1672174189.git.nabijaczleweli@nabijaczleweli.xyz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
