Zswap does not support storing or loading large folios. Until proper
support is added, attempts to load large folios from zswap are a bug.
For example, if a swapin fault observes that contiguous PTEs are pointing
to contiguous swap entries and tries to swap them in as a large folio,
swap_read_folio() will pass in a large folio to zswap_load(), but
zswap_load() will only effectively load the first page in the folio. If
the first page is not in zswap, the folio will be read from disk, even
though other pages may be in zswap.
In both cases, this will lead to silent data corruption. Proper support
needs to be added before large folio swapins and zswap can work together.
Looking at callers of swap_read_folio(), it seems like they are either
allocated from __read_swap_cache_async() or do_swap_page() in the
SWP_SYNCHRONOUS_IO path. Both of which allocate order-0 folios, so
everything is fine for now.
However, there is ongoing work to add to support large folio swapins [1].
To make sure new development does not break zswap (or get broken by
zswap), add minimal handling of incorrect loads of large folios to zswap.
First, move the call folio_mark_uptodate() inside zswap_load().
If a large folio load is attempted, and zswap was ever enabled on the
system, return 'true' without calling folio_mark_uptodate(). This will
prevent the folio from being read from disk, and will emit an IO error
because the folio is not uptodate (e.g. do_swap_fault() will return
VM_FAULT_SIGBUS). It may not be reliable recovery in all cases, but it is
better than nothing.
This was tested by hacking the allocation in __read_swap_cache_async() to
use order 2 and __GFP_COMP.
In the future, to handle this correctly, the swapin code should:
(a) Fall back to order-0 swapins if zswap was ever used on the
machine, because compressed pages remain in zswap after it is
disabled.
(b) Add proper support to swapin large folios from zswap (fully or
partially).
Probably start with (a) then followup with (b).
[1]https://lore.kernel.org/linux-mm/20240304081348.197341-6-21cnbao@gmail.com/
Link: https://lkml.kernel.org/r/20240611024516.1375191-3-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Barry Song <baohua@kernel.org>
Cc: Barry Song <baohua@kernel.org>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Chris Li <chrisl@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add zswap_never_enabled() to skip the xarray lookup in zswap_load() if
zswap was never enabled on the system. It is implemented using static
branches for efficiency, as enabling zswap should be a rare event. This
could shave some cycles off zswap_load() when CONFIG_ZSWAP is used but
zswap is never enabled.
However, the real motivation behind this patch is two-fold:
- Incoming large folio swapin work will need to fallback to order-0
folios if zswap was ever enabled, because any part of the folio could be
in zswap, until proper handling of large folios with zswap is added.
- A warning and recovery attempt will be added in a following change in
case the above was not done incorrectly. Zswap will fail the read if
the folio is large and it was ever enabled.
Expose zswap_never_enabled() in the header for the swapin work to use
it later.
[yosryahmed@google.com: expose zswap_never_enabled() in the header]
Link: https://lkml.kernel.org/r/Zmjf0Dr8s9xSW41X@google.com
Link: https://lkml.kernel.org/r/20240611024516.1375191-2-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Chris Li <chrisl@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In preparation for introducing a similar function, rename
is_zswap_enabled() to use zswap_* prefix like other zswap functions.
Link: https://lkml.kernel.org/r/20240611024516.1375191-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Chris Li <chrisl@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A variable name 'page' is used in zswap_is_folio_same_filled() and
zswap_fill_page() to point at the kmapped data in a folio. Use 'data'
instead to avoid confusion and stop it from showing up when searching
for 'page' references in mm/zswap.c.
While we are at it, move the kmap/kunmap calls into zswap_fill_page(),
make it take in a folio, and rename it to zswap_fill_folio().
Link: https://lkml.kernel.org/r/20240524033819.1953587-4-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Eliminate the last explicit 'struct page' reference in mm/zswap.c.
Link: https://lkml.kernel.org/r/20240524033819.1953587-3-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: zswap: trivial folio conversions".
Some trivial folio conversions in zswap code.
This patch (of 3):
sg_set_folio() is equivalent to sg_set_page() for order-0 folios, which
are the only ones supported by zswap. Now zswap_decompress() can take in
a folio directly.
Link: https://lkml.kernel.org/r/20240524033819.1953587-1-yosryahmed@google.com
Link: https://lkml.kernel.org/r/20240524033819.1953587-2-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
These knobs offer more fine-grained control to userspace than needed and
directly expose/influence kernel implementation; remove them.
For disabling same_filled handling, there is no logical reason to refuse
storing same-filled pages more efficiently and opt for compression.
Scanning pages for patterns may be an argument, but the page contents will
be read into the CPU cache anyway during compression. Also, removing the
same_filled handling code does not move the needle significantly in terms
of performance anyway [1].
For disabling non_same_filled handling, it was added when the compressed
pages in zswap were not being properly charged to memcgs, as workloads
could escape the accounting with compression [2]. This is no longer the
case after commit f4840ccfca ("zswap: memcg accounting"), and using
zswap without compression does not make much sense.
[1]https://lore.kernel.org/lkml/CAJD7tkaySFP2hBQw4pnZHJJwe3bMdjJ1t9VC2VJd=khn1_TXvA@mail.gmail.com/
[2]https://lore.kernel.org/lkml/19d5cdee-2868-41bd-83d5-6da75d72e940@maciej.szmigiero.name/
[yosryahmed@google.com: remove same_filled_pages from docs]
Link: https://lkml.kernel.org/r/ZhxFVggdyvCo79jc@google.com
Link: https://lkml.kernel.org/r/20240413022407.785696-5-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Cc: "Maciej S. Szmigiero" <mail@maciej.szmigiero.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, zswap_store() checks zswap_same_filled_pages_enabled, kmaps the
folio, then calls zswap_is_page_same_filled() to check the folio contents.
Move this logic into zswap_is_page_same_filled() as well (and rename it
to use 'folio' while we are at it).
This makes zswap_store() cleaner, and makes following changes to that
logic contained within the helper.
While we are at it:
- Rename the insert_entry label to store_entry to match xa_store().
- Add comment headers for same-filled functions and the main API
functions (load, store, invalidate, swapon, swapoff).
No functional change intended.
Link: https://lkml.kernel.org/r/20240413022407.785696-4-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Maciej S. Szmigiero" <mail@maciej.szmigiero.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Refactor limit and acceptance threshold checking outside of zswap_store().
This code will be moved around in a following patch, so it would be
cleaner to move a function call around.
Link: https://lkml.kernel.org/r/20240413022407.785696-3-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Maciej S. Szmigiero" <mail@maciej.szmigiero.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "zswap same-filled and limit checking cleanups", v3.
Miscellaneous cleanups for limit checking and same-filled handling in the
store path. This series was broken out of the "zswap: store zero-filled
pages more efficiently" series [1]. It contains the cleanups and drops
the main functional changes.
[1]https://lore.kernel.org/lkml/20240325235018.2028408-1-yosryahmed@google.com/
This patch (of 4):
The cleanup code in zswap_store() is not pretty, particularly the 'shrink'
label at the bottom that ends up jumping between cleanup labels.
Instead of having a dedicated label to shrink the pool, just use
zswap_pool_reached_full directly to figure out if the pool needs
shrinking. zswap_pool_reached_full should be true if and only if the pool
needs shrinking.
The only caveat is that the value of zswap_pool_reached_full may be
changed by concurrent zswap_store() calls between checking the limit and
testing zswap_pool_reached_full in the cleanup code. This is fine
because:
- If zswap_pool_reached_full was true during limit checking then became
false during the cleanup code, then someone else already took care of
shrinking the pool and there is no need to queue the worker. That
would be a good change.
- If zswap_pool_reached_full was false during limit checking then became
true during the cleanup code, then someone else hit the limit
meanwhile. In this case, both threads will try to queue the worker,
but it never gets queued more than once anyway. Also, calling
queue_work() multiple times when the limit is hit could already happen
today, so this isn't a significant change in any way.
Link: https://lkml.kernel.org/r/20240413022407.785696-1-yosryahmed@google.com
Link: https://lkml.kernel.org/r/20240413022407.785696-2-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Maciej S. Szmigiero" <mail@maciej.szmigiero.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Very deep RB tree requires rebalance at times. That contributes to the
zswap fault latencies. Xarray does not need to perform tree rebalance.
Replacing RB tree to xarray can have some small performance gain.
One small difference is that xarray insert might fail with ENOMEM, while
RB tree insert does not allocate additional memory.
The zswap_entry size will reduce a bit due to removing the RB node, which
has two pointers and a color field. Xarray store the pointer in the
xarray tree rather than the zswap_entry. Every entry has one pointer from
the xarray tree. Overall, switching to xarray should save some memory, if
the swap entries are densely packed.
Notice the zswap_rb_search and zswap_rb_insert often followed by
zswap_rb_erase. Use xa_erase and xa_store directly. That saves one tree
lookup as well.
Remove zswap_invalidate_entry due to no need to call zswap_rb_erase any
more. Use zswap_free_entry instead.
The "struct zswap_tree" has been replaced by "struct xarray". The tree
spin lock has transferred to the xarray lock.
Run the kernel build testing 5 times for each version, averages:
(memory.max=2GB, zswap shrinker and writeback enabled, one 50GB swapfile,
24 HT core, 32 jobs)
mm-unstable-4aaccadb5c04 xarray v9
user 3548.902 3534.375
sys 522.232 520.976
real 202.796 200.864
[chrisl@kernel.org: restore original comment "erase" to "invalidate"]
Link: https://lkml.kernel.org/r/20240326-zswap-xarray-v10-1-bf698417c968@kernel.org
Link: https://lkml.kernel.org/r/20240326-zswap-xarray-v9-1-d2891a65dfc7@kernel.org
Signed-off-by: Chris Li <chrisl@kernel.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
nr_stored was introduced by commit b5ba474f3f ("zswap: shrink zswap pool
based on memory pressure") as a per zswap_pool counter of the number of
stored pages that are not same-filled pages. It is used in
zswap_shrinker_count() to scale the number of freeable compressed pages by
the compression ratio. That is, to reduce the amount of writeback from
zswap with higher compression ratios as the ROI from IO diminishes.
Later on, commit bf9b7df23c ("mm/zswap: global lru and shrinker shared
by all zswap_pools") made the shrinker global (not per zswap_pool), and
replaced nr_stored with nr_zswap_stored (initially introduced as
zswap.nr_stored), which is now a global counter.
The counter is now awfully close to zswap_stored_pages. The only
difference is that the latter also includes same-filled pages. Also, when
memcgs are enabled, we use memcg_page_state(memcg, MEMCG_ZSWAPPED), which
includes same-filled pages anyway (i.e. equivalent to
zswap_stored_pages).
Use zswap_stored_pages instead in zswap_shrinker_count() to keep things
consistent whether memcgs are enabled or not, and add a comment about the
number of freeable pages possibly being scaled down more than it should if
we have lots of same-filled pages (i.e. inflated compression ratio).
Remove nr_zswap_stored and one atomic operation in the store and free
paths.
Link: https://lkml.kernel.org/r/20240322001001.1562517-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
zswap_find_zpool() checks if ZSWAP_NR_ZPOOLS > 1, which is always true.
This is a remnant from a patch version that had ZSWAP_NR_ZPOOLS as a
config option and never made it upstream. Remove the unnecessary check.
Link: https://lkml.kernel.org/r/20240311235210.2937484-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All zswap backends track their pool sizes in pages. Currently they
multiply by PAGE_SIZE for zswap, only for zswap to divide again in order
to do limit math. Report pages directly.
Link: https://lkml.kernel.org/r/20240312153901.3441-2-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Profiling the munmap() of a zswapped memory region shows 60% of the total
cycles currently going into updating the zswap_pool_total_size.
There are three consumers of this counter:
- store, to enforce the globally configured pool limit
- meminfo & debugfs, to report the size to the user
- shrink, to determine the batch size for each cycle
Instead of aggregating everytime an entry enters or exits the zswap
pool, aggregate the value from the zpools on-demand:
- Stores aggregate the counter anyway upon success. Aggregating to
check the limit instead is the same amount of work.
- Meminfo & debugfs might benefit somewhat from a pre-aggregated
counter, but aren't exactly hotpaths.
- Shrinking can aggregate once for every cycle instead of doing it for
every freed entry. As the shrinker might work on tens or hundreds of
objects per scan cycle, this is a large reduction in aggregations.
The paths that benefit dramatically are swapin, swapoff, and unmaps.
There could be millions of pages being processed until somebody asks for
the pool size again. This eliminates the pool size updates from those
paths entirely.
Top profile entries for a 24G range munmap(), before:
38.54% zswap-unmap [kernel.kallsyms] [k] zs_zpool_total_size
12.51% zswap-unmap [kernel.kallsyms] [k] zpool_get_total_size
9.10% zswap-unmap [kernel.kallsyms] [k] zswap_update_total_size
2.95% zswap-unmap [kernel.kallsyms] [k] obj_cgroup_uncharge_zswap
2.88% zswap-unmap [kernel.kallsyms] [k] __slab_free
2.86% zswap-unmap [kernel.kallsyms] [k] xas_store
and after:
7.70% zswap-unmap [kernel.kallsyms] [k] __slab_free
7.16% zswap-unmap [kernel.kallsyms] [k] obj_cgroup_uncharge_zswap
6.74% zswap-unmap [kernel.kallsyms] [k] xas_store
It was also briefly considered to move to a single atomic in zswap
that is updated by the backends, since zswap only cares about the sum
of all pools anyway. However, zram directly needs per-pool information
out of zsmalloc. To keep the backend from having to update two atomics
every time, I opted for the lazy aggregation instead for now.
Link: https://lkml.kernel.org/r/20240312153901.3441-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
9 out of 16 callers perform a NULL check before calling obj_cgroup_put().
Move the NULL check in the function, similar to mem_cgroup_put(). The
unlikely() NULL check in current_objcg_update() was left alone to avoid
dropping the unlikey() annotation as this a fast path.
Link: https://lkml.kernel.org/r/20240316015803.2777252-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Christian reports a NULL deref in zswap that he bisected down to the zswap
shrinker. The issue also cropped up in the bug trackers of libguestfs [1]
and the Red Hat bugzilla [2].
The problem is that when memcg is disabled with the boot time flag, the
zswap shrinker might get called with sc->memcg == NULL. This is okay in
many places, like the lruvec operations. But it crashes in
memcg_page_state() - which is only used due to the non-node accounting of
cgroup's the zswap memory to begin with.
Nhat spotted that the memcg can be NULL in the memcg-disabled case, and I
was then able to reproduce the crash locally as well.
[1] https://github.com/libguestfs/libguestfs/issues/139
[2] https://bugzilla.redhat.com/show_bug.cgi?id=2275252
Link: https://lkml.kernel.org/r/20240418124043.GC1055428@cmpxchg.org
Link: https://lkml.kernel.org/r/20240417143324.GA1055428@cmpxchg.org
Fixes: b5ba474f3f ("zswap: shrink zswap pool based on memory pressure")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Christian Heusel <christian@heusel.eu>
Debugged-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Nhat Pham <nphamcs@gmail.com>
Tested-by: Christian Heusel <christian@heusel.eu>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Richard W.M. Jones <rjones@redhat.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: <stable@vger.kernel.org> [v6.8]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zhongkun He reports data corruption when combining zswap with zram.
The issue is the exclusive loads we're doing in zswap. They assume
that all reads are going into the swapcache, which can assume
authoritative ownership of the data and so the zswap copy can go.
However, zram files are marked SWP_SYNCHRONOUS_IO, and faults will try to
bypass the swapcache. This results in an optimistic read of the swap data
into a page that will be dismissed if the fault fails due to races. In
this case, zswap mustn't drop its authoritative copy.
Link: https://lore.kernel.org/all/CACSyD1N+dUvsu8=zV9P691B9bVq33erwOXNTmEaUbi9DrDeJzw@mail.gmail.com/
Fixes: b9c91c4341 ("mm: zswap: support exclusive loads")
Link: https://lkml.kernel.org/r/20240324210447.956973-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Zhongkun He <hezhongkun.hzk@bytedance.com>
Tested-by: Zhongkun He <hezhongkun.hzk@bytedance.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Barry Song <baohua@kernel.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Most compressors are actually CPU-based and won't sleep during compression
and decompression. We should remove the redundant memcpy for them.
This patch checks if the algorithm is sleepable by testing the
CRYPTO_ALG_ASYNC algorithm flag.
Generally speaking, async and sleepable are semantically similar but not
equal. But for compress drivers, they are basically equal at least due to
the below facts.
Firstly, scompress drivers - crypto/deflate.c, lz4.c, zstd.c, lzo.c etc
have no sleep. Secondly, zRAM has been using these scompress drivers for
years in atomic contexts, and never worried those drivers going to sleep.
One exception is that an async driver can sometimes still return
synchronously per Herbert's clarification. In this case, we are still
having a redundant memcpy. But we can't know if one particular acomp
request will sleep or not unless crypto can expose more details for each
specific request from offload drivers.
Link: https://lkml.kernel.org/r/20240222081135.173040-3-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Chris Li <chrisl@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit bf9b7df23c ("mm/zswap: global lru and shrinker shared by all
zswap_pools") introduced a new lock to protect zswap_next_shrink, instead
of reusing zswap_pools_lock.
But the problem is that it's initialized only when zswap enabled, which
causes bug if zswap_memcg_offline_cleanup() called without zswap enabled.
Fix it by using DEFINE_SPINLOCK() to statically initialize them and define
them as multiple static variables to keep in consistent with the existing
global variables in zswap.
Link: https://lkml.kernel.org/r/20240305075345.1493214-1-chengming.zhou@linux.dev
Fixes: bf9b7df23c ("mm/zswap: global lru and shrinker shared by all zswap_pools")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202403051008.a8cf8a94-lkp@intel.com
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All zswap entries will take a reference of zswap_pool when zswap_store(),
and drop it when free. Change it to use the percpu_ref is better for
scalability performance.
Although percpu_ref use a bit more memory which should be ok for our use
case, since we almost have only one zswap_pool to be using. The
performance gain is for zswap_store/load hotpath.
Testing kernel build (32 threads) in tmpfs with memory.max=2GB. (zswap
shrinker and writeback enabled with one 50GB swapfile, on a 128 CPUs
x86-64 machine, below is the average of 5 runs)
mm-unstable zswap-global-lru
real 63.20 63.12
user 1061.75 1062.95
sys 268.74 264.44
[chengming.zhou@linux.dev: fix zswap_pools_lock usages after changing to percpu_ref]
Link: https://lkml.kernel.org/r/20240228154954.3028626-1-chengming.zhou@linux.dev
Link: https://lkml.kernel.org/r/20240210-zswap-global-lru-v3-2-200495333595@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/zswap: optimize for dynamic zswap_pools", v3.
Dynamic pool creation has been supported for a long time, which maybe not
used so much in practice. But with the per-memcg lru merged, the current
structure of zswap_pool's lru and shrinker become less optimal.
In the current structure, each zswap_pool has its own lru, shrinker and
shrink_work, but only the latest zswap_pool will be the current used.
1. When memory has pressure, all shrinkers of zswap_pools will try to
shrink its lru list, there is no order between them.
2. When zswap limit hit, only the last zswap_pool's shrink_work will
try to shrink its own lru, which is inefficient.
A more natural way is to have a global zswap lru shared between all
zswap_pools, and so is the shrinker. The code becomes much simpler too.
Another optimization is changing zswap_pool kref to percpu_ref, which will
be taken reference by every zswap entry. So the scalability is better.
Testing kernel build (32 threads) in tmpfs with memory.max=2GB. (zswap
shrinker and writeback enabled with one 50GB swapfile, on a 128 CPUs
x86-64 machine, below is the average of 5 runs)
mm-unstable zswap-global-lru
real 63.20 63.12
user 1061.75 1062.95
sys 268.74 264.44
This patch (of 3):
Dynamic zswap_pool creation may create/reuse to have multiple zswap_pools
in a list, only the first will be current used.
Each zswap_pool has its own lru and shrinker, which is not necessary and
has its problem:
1. When memory has pressure, all shrinker of zswap_pools will
try to shrink its own lru, there is no order between them.
2. When zswap limit hit, only the last zswap_pool's shrink_work
will try to shrink its lru list. The rationale here was to
try and empty the old pool first so that we can completely
drop it. However, since we only support exclusive loads now,
the LRU ordering should be entirely decided by the order of
stores, so the oldest entries on the LRU will naturally be
from the oldest pool.
Anyway, having a global lru and shrinker shared by all zswap_pools is
better and efficient.
Link: https://lkml.kernel.org/r/20240210-zswap-global-lru-v3-0-200495333595@bytedance.com
Link: https://lkml.kernel.org/r/20240210-zswap-global-lru-v3-1-200495333595@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We used to rely on the returned -ENOSPC of zpool_malloc() to increase
reject_compress_poor. But the code wouldn't get to there after commit
744e188592 ("crypto: scomp - fix req->dst buffer overflow") as the new
code will goto out immediately after the special compression case happens.
So there might be no longer a chance to execute zpool_malloc now. We are
incorrectly increasing zswap_reject_compress_fail instead. Thus, we need
to fix the counters handling right after compressions return ENOSPC. This
patch also centralizes the counters handling for all of compress_poor,
compress_fail and alloc_fail.
Link: https://lkml.kernel.org/r/20240219211935.72394-1-21cnbao@gmail.com
Fixes: 744e188592 ("crypto: scomp - fix req->dst buffer overflow")
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We may encounter duplicate entry in the zswap_store():
1. swap slot that freed to per-cpu swap cache, doesn't invalidate
the zswap entry, then got reused. This has been fixed.
2. !exclusive load mode, swapin folio will leave its zswap entry
on the tree, then swapout again. This has been removed.
3. one folio can be dirtied again after zswap_store(), so need to
zswap_store() again. This should be handled correctly.
So we must invalidate the old duplicate entry before inserting the
new one, which actually doesn't have to be done at the beginning
of zswap_store().
The good point is that we don't need to lock the tree twice in the normal
store success path. And cleanup the loop as we are here.
Note we still need to invalidate the old duplicate entry when store failed
or zswap is disabled , otherwise the new data in swapfile could be
overwrite by the old data in zswap pool when lru writeback.
Link: https://lkml.kernel.org/r/20240209044112.3883835-1-chengming.zhou@linux.dev
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Chris Li <chrisl@kernel.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since we don't need to leave zswap entry on the zswap tree anymore,
we should remove it from tree once we find it from the tree.
Then after using it, we can directly free it, no concurrent path
can find it from tree. Only the shrinker can see it from lru list,
which will also double check under tree lock, so no race problem.
So we don't need refcount in zswap entry anymore and don't need to
take the spinlock for the second time to invalidate it.
The side effect is that zswap_entry_free() maybe not happen in tree
spinlock, but it's ok since nothing need to be protected by the lock.
Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-6-99d4084260a0@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The !zswap_exclusive_loads_enabled mode will leave compressed copy in
the zswap tree and lru list after the folio swapin.
There are some disadvantages in this mode:
1. It's a waste of memory since there are two copies of data, one is
folio, the other one is compressed data in zswap. And it's unlikely
the compressed data is useful in the near future.
2. If that folio is dirtied, the compressed data must be not useful,
but we don't know and don't invalidate the trashy memory in zswap.
3. It's not reclaimable from zswap shrinker since zswap_writeback_entry()
will always return -EEXIST and terminate the shrinking process.
On the other hand, the only downside of zswap_exclusive_loads_enabled
is a little more cpu usage/latency when compression, and the same if
the folio is removed from swapcache or dirtied.
More explanation by Johannes on why we should consider exclusive load
as the default for zswap:
Caching "swapout work" is helpful when the system is thrashing. Then
recently swapped in pages might get swapped out again very soon. It
certainly makes sense with conventional swap, because keeping a clean
copy on the disk saves IO work and doesn't cost any additional memory.
But with zswap, it's different. It saves some compression work on a
thrashing page. But the act of keeping compressed memory contributes
to a higher rate of thrashing. And that can cause IO in other places
like zswap writeback and file memory.
And the A/B test results of the kernel build in tmpfs with limited memory
can support this theory:
!exclusive exclusive
real 63.80 63.01
user 1063.83 1061.32
sys 290.31 266.15
workingset_refault_anon 2383084.40 1976397.40
workingset_refault_file 44134.00 45689.40
workingset_activate_anon 837878.00 728441.20
workingset_activate_file 4710.00 4085.20
workingset_restore_anon 732622.60 639428.40
workingset_restore_file 1007.00 926.80
workingset_nodereclaim 0.00 0.00
pgscan 14343003.40 12409570.20
pgscan_kswapd 0.00 0.00
pgscan_direct 14343003.40 12409570.20
pgscan_khugepaged 0.00 0.00
Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-5-99d4084260a0@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
cat /sys/kernel/debug/zswap/duplicate_entry
2086447
When testing, the duplicate_entry value is very high, but no warning
message in the kernel log. From the comment of duplicate_entry "Duplicate
store was encountered (rare)", it seems something goes wrong.
Actually it's incremented in the beginning of zswap_store(), which found
its zswap entry has already on the tree. And this is a normal case, since
the folio could leave zswap entry on the tree after swapin, later it's
dirtied and swapout/zswap_store again, found its original zswap entry.
So duplicate_entry should be only incremented in the real bug case, which
already have "WARN_ON(1)", it looks redundant to count bug case, so this
patch just remove it.
Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-4-99d4084260a0@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the shrinker encounter an existing folio in swap cache, it means we
are shrinking into the warmer region. We should terminate shrinking if
we're in the dynamic shrinker context.
This patch add LRU_STOP to support this, to avoid overshrinking.
Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-3-99d4084260a0@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During testing I found there are some times the zswap_writeback_entry()
return -ENOMEM, which is not we expected:
bpftrace -e 'kr:zswap_writeback_entry {@[(int32)retval]=count()}'
@[-12]: 1563
@[0]: 277221
The reason is that __read_swap_cache_async() return NULL because
swapcache_prepare() failed. The reason is that we won't invalidate zswap
entry when swap entry freed to the per-cpu pool, these zswap entries are
still on the zswap tree and lru list.
This patch moves the invalidation ahead to when swap entry freed to the
per-cpu pool, since there is no any benefit to leave trashy zswap entry on
the tree and lru list.
With this patch:
bpftrace -e 'kr:zswap_writeback_entry {@[(int32)retval]=count()}'
@[0]: 259744
Note: large folio can't have zswap entry for now, so don't bother
to add zswap entry invalidation in the large folio swap free path.
Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-2-99d4084260a0@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/zswap: optimize zswap lru list", v2.
This series is motivated when observe the zswap lru list shrinking, noted
there are some unexpected cases in zswap_writeback_entry().
bpftrace -e 'kr:zswap_writeback_entry {@[(int32)retval]=count()}'
There are some -ENOMEM because when the swap entry is freed to per-cpu
swap pool, it doesn't invalidate/drop zswap entry. Then the shrinker
encounter these trashy zswap entries, it can't be reclaimed and return
-ENOMEM.
So move the invalidation ahead to when swap entry freed to the per-cpu
swap pool, since there is no any benefit to leave trashy zswap entries on
the zswap tree and lru list.
Another case is -EEXIST, which is seen more in the case of
!zswap_exclusive_loads_enabled, in which case the swapin folio will leave
compressed copy on the tree and lru list. And it can't be reclaimed until
the folio is removed from swapcache.
Changing to zswap_exclusive_loads_enabled mode will invalidate when folio
swapin, which has its own drawback if that folio is still clean in
swapcache and swapout again, we need to compress it again. Please see the
commit for details on why we choose exclusive load as the default for
zswap.
Another optimization for -EEXIST is that we add LRU_STOP to support
terminating the shrinking process to avoid evicting warmer region.
Testing using kernel build in tmpfs, one 50GB swapfile and
zswap shrinker_enabled, with memory.max set to 2GB.
mm-unstable zswap-optimize
real 63.90s 63.25s
user 1064.05s 1063.40s
sys 292.32s 270.94s
The main optimization is in sys cpu, about 7% improvement.
This patch (of 6):
Add more comments in shrink_memcg_cb() to describe the deref dance which
is implemented to fix race problem between lru writeback and swapoff, and
the reason why we rotate the entry at the beginning.
Also fix the stale comments in zswap_writeback_entry(), and add more
comments to state that we only deref the tree after we get the swapcache
reference.
Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-0-99d4084260a0@bytedance.com
Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-1-99d4084260a0@bytedance.com
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Suggested-by: Yosry Ahmed <yosryahmed@google.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
shrink_memcg_cb() is called by the shrinker and is based on
zswap_writeback_entry(). Move it in between. Save one fwd decl.
Link: https://lkml.kernel.org/r/20240130014208.565554-21-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The per-cpu compression init/exit callbacks are awkwardly in the
middle of the shrinker code. Move them up to the compression section.
Link: https://lkml.kernel.org/r/20240130014208.565554-19-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Writeback needs to decompress. Move the (de)compression API above what
will be the consolidated shrinking/writeback code.
Link: https://lkml.kernel.org/r/20240130014208.565554-18-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The higher-level entry operations modify the tree, so move the entry
API after the tree section.
Link: https://lkml.kernel.org/r/20240130014208.565554-17-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This completes consolidation of the LRU section.
Link: https://lkml.kernel.org/r/20240130014208.565554-16-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The zswap entry section sits awkwardly in the middle of LRU-related
functions. Group the external LRU API functions first.
Link: https://lkml.kernel.org/r/20240130014208.565554-15-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: zswap: cleanups".
Cleanups and maintenance items that accumulated while reviewing zswap
patches.
This patch (of 20):
The parameters primarily control pool attributes. Move those
operations up to the pool section.
Link: https://lkml.kernel.org/r/20240130014208.565554-1-hannes@cmpxchg.org
Link: https://lkml.kernel.org/r/20240130014208.565554-14-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move the operations against the global zswap_pools list (current pool,
last, find) to the pool section.
Link: https://lkml.kernel.org/r/20240130014208.565554-13-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move pool refcounting functions into the pool section. First the
destroy functions, then the get and put which uses them.
__zswap_pool_empty() has an upward reference to the global
zswap_pools, to sanity check it's not the currently active pool that's
being freed. That gets the forward decl for zswap_pool_current().
This puts the get and put function above all callers, so kill the
forward decls as well.
Link: https://lkml.kernel.org/r/20240130014208.565554-12-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The function ordering in zswap.c is a little chaotic, which requires
jumping in unexpected directions when following related code. This is
a series of patches that brings the file into the following order:
- pool functions
- lru functions
- rbtree functions
- zswap entry functions
- compression/backend functions
- writeback & shrinking functions
- store, load, invalidate, swapon, swapoff
- debugfs
- init
But it has to be split up such the moving still produces halfway
readable diffs.
In this patch, move pool allocation and freeing functions.
Link: https://lkml.kernel.org/r/20240130014208.565554-11-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The branching is awkward and duplicates code. The comment about
writeback is also misleading: yes, the entry might have been written
back. Or it might have never been stored in zswap to begin with due to
a rejection - zswap_invalidate() is called on all exiting swap entries.
Link: https://lkml.kernel.org/r/20240130014208.565554-10-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Remove dupentry, reusing entry works just fine.
- Rename pool to shrink_pool, as this one actually is confusing.
- Remove page, use folio_nid() and kmap_local_folio() directly.
- Set entry->swpentry in a common path.
- Move value and src to local scope of use.
Link: https://lkml.kernel.org/r/20240130014208.565554-9-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
zswap_store() is long and mixes work at the zswap layer with work at
the backend and compression layer. Move compression & backend work to
zswap_compress(), mirroring zswap_decompress().
Link: https://lkml.kernel.org/r/20240130014208.565554-8-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove stale comment and unnecessary local variable.
Link: https://lkml.kernel.org/r/20240130014208.565554-6-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Put a standard sanity check on zswap_entry_get() for UAF scenario.
Link: https://lkml.kernel.org/r/20240130014208.565554-5-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move it up to the other tree and refcounting functions.
Link: https://lkml.kernel.org/r/20240130014208.565554-4-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
