mirror of
https://github.com/torvalds/linux.git
synced 2024-12-04 18:13:04 +00:00
1227db9eab
11911 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
1227db9eab |
Core MTD changes:
* mtdchar: add MEMREAD ioctl
* Add ECC error accounting for each read request
* always initialize 'stats' in struct mtd_oob_ops
* Track maximum number of bitflips for each read request
* Fix repeated word in comment
* Move from strlcpy with unused retval to strscpy
* Fix a typo in a comment
* Add binding for U-Boot bootloader partitions
MTD device drivers changes:
* FTL: use container_of() rather than cast
* docg3:
- Use correct function names in comment blocks
- Check the return value of devm_ioremap() in the probe
* physmap-core: Fix NULL pointer dereferencing in of_select_probe_type()
* parsers: add Broadcom's U-Boot parser
Raw NAND core changes:
* Replace of_gpio_named_count() by gpiod_count()
- Remove misguided comment of nand_get_device()
- bbt: Use the bitmap API to allocate bitmaps
Raw NAND controller drivers changes:
* Meson:
- Stop supporting legacy clocks
- Refine resource getting in probe
- Convert bindings to yaml
- Fix clock handling and update the bindings accordingly
- Fix bit map use in meson_nfc_ecc_correct()
* bcm47xx:
- Fix spelling typo in comment
* STM32 FMC2:
- Switch to using devm_fwnode_gpiod_get()
- Fix dma_map_sg error check
* Cadence:
- Remove an unneeded result variable
* Marvell:
- Fix error handle regarding dma_map_sg
* Orion:
- Use devm_clk_get_optional()
* Cafe:
- Use correct function name in comment block
* Atmel:
- Unmap streaming DMA mappings
* Arasan:
- Stop using 0 as NULL pointer
* GPMI:
- Fix typo 'the the' in comment
* BRCM:
- Add individual glue driver selection
- Move Kconfig to driver folder
* FSL: Fix none ECC mode
* Intel:
- Use devm_platform_ioremap_resource_byname()
- Remove unused clk_rate member from struct ebu_nand
- Remove unused nand_pa member from ebu_nand_cs
- Don't re-define NAND_DATA_IFACE_CHECK_ONLY
- Remove undocumented compatible string
- Fix compatible string in the bindings
- Read the chip-select line from the correct OF node
- Fix maximum chip select value in the bindings
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmNAPlUACgkQJWrqGEe9
VoTQogf/VPcMpDXORmgCm0HldghXsY2WqY92xUCNDEtREUmqLe+mEVuXlucWQdeM
tthHNDhLIJQKDfmGdJiOBOqAZ5D6tjT+ZjTySOGP7TH2gzd5XmGGhFZlblioqryn
oqE2XmPs72hKaFJhcC00Y/DFeaD/EsDolyLgwl9s6hI/JGPLcRFa8Z4gjRkWW8B9
NZEk5mB1AVm2MVjXF0OkT/Pm/FtFQ1HpprV4qhG2ZOHcL1GeDrGddNCZIf3vXgKY
PXHCdjhej+zusHxVsYgkH0ju3n7OYTuxctLPbmK7Gqi3QeBj1SbpZWHEjyPrerFu
jj8W8OXErxNQN49jngnbUa0ZKwuwag==
=6/gy
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"Core MTD changes:
- mtdchar: add MEMREAD ioctl
- Add ECC error accounting for each read request
- always initialize 'stats' in struct mtd_oob_ops
- Track maximum number of bitflips for each read request
- Fix repeated word in comment
- Move from strlcpy with unused retval to strscpy
- Fix a typo in a comment
- Add binding for U-Boot bootloader partitions
MTD device drivers changes:
- FTL: use container_of() rather than cast
- docg3:
- Use correct function names in comment blocks
- Check the return value of devm_ioremap() in the probe
- physmap-core: Fix NULL pointer dereferencing in
of_select_probe_type()
- parsers: add Broadcom's U-Boot parser
Raw NAND core changes:
- Replace of_gpio_named_count() by gpiod_count()
- Remove misguided comment of nand_get_device()
- bbt: Use the bitmap API to allocate bitmaps
Raw NAND controller drivers changes:
- Meson:
- Stop supporting legacy clocks
- Refine resource getting in probe
- Convert bindings to yaml
- Fix clock handling and update the bindings accordingly
- Fix bit map use in meson_nfc_ecc_correct()
- bcm47xx:
- Fix spelling typo in comment
- STM32 FMC2:
- Switch to using devm_fwnode_gpiod_get()
- Fix dma_map_sg error check
- Cadence:
- Remove an unneeded result variable
- Marvell:
- Fix error handle regarding dma_map_sg
- Orion:
- Use devm_clk_get_optional()
- Cafe:
- Use correct function name in comment block
- Atmel:
- Unmap streaming DMA mappings
- Arasan:
- Stop using 0 as NULL pointer
- GPMI:
- Fix typo 'the the' in comment
- BRCM:
- Add individual glue driver selection
- Move Kconfig to driver folder
- FSL: Fix none ECC mode
- Intel:
- Use devm_platform_ioremap_resource_byname()
- Remove unused clk_rate member from struct ebu_nand
- Remove unused nand_pa member from ebu_nand_cs
- Don't re-define NAND_DATA_IFACE_CHECK_ONLY
- Remove undocumented compatible string
- Fix compatible string in the bindings
- Read the chip-select line from the correct OF node
- Fix maximum chip select value in the bindings"
* tag 'mtd/for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (43 commits)
mtd: rawnand: meson: stop supporting legacy clocks
dt-bindings: nand: meson: convert txt to yaml
mtd: rawnand: meson: refine resource getting in probe
mtd: rawnand: meson: fix the clock
dt-bindings: nand: meson: fix meson nfc clock
mtd: rawnand: bcm47xx: fix spelling typo in comment
mtd: rawnand: stm32_fmc2: switch to using devm_fwnode_gpiod_get()
mtd: rawnand: cadence: Remove an unneeded result variable
mtd: rawnand: Replace of_gpio_named_count() by gpiod_count()
mtd: rawnand: marvell: Fix error handle regarding dma_map_sg
mtd: rawnand: stm32_fmc2: Fix dma_map_sg error check
mtd: rawnand: remove misguided comment of nand_get_device()
mtd: rawnand: orion: Use devm_clk_get_optional()
mtd: rawnand: cafe: Use correct function name in comment block
mtd: rawnand: atmel: Unmap streaming DMA mappings
mtd: rawnand: meson: fix bit map use in meson_nfc_ecc_correct()
mtd: rawnand: arasan: stop using 0 as NULL pointer
mtd: rawnand: gpmi: Fix typo 'the the' in comment
mtd: rawnand: brcmnand: Add individual glue driver selection
mtd: rawnand: brcmnand: Move Kconfig to driver folder
...
|
||
|
Linus Torvalds
|
79d11de963 |
Assorted HID drivers updates and fixes for 6.1
-----BEGIN PGP SIGNATURE----- iQJSBAABCAA8FiEEoEVH9lhNrxiMPSyI7MXwXhnZSjYFAmM9UhweHGJlbmphbWlu LnRpc3NvaXJlc0ByZWRoYXQuY29tAAoJEOzF8F4Z2Uo2pE8P/23iRM/+kO2KDeU8 3lp6z1Ny/Hp0HPAsWCgAywgPcNoG+JaxBdAFv2YXky0RI3/OMtI+6FK36XJs63E5 twjFwySxupY2CXLIXjSkLunAWlZUwtpRLnrBpPwgG87wKkI8IvPmv1AwkiYO9GD9 Q0vtd+GaE7Bx33XBga4IcVx1hODL/SDeT1ozS1czhv4NNutRsR7lxCsn6qKly9WK zwoTHEOIJnq4oLZElmnxuJeUU1vvRXy4g+xPV+rfqbnlZUh0zQeD//1G7lRchEel t6l5SDR9pZ+zbWUw7gtU/KoUtf4eJ5+4fX9ejMqtEvoQLquePYQOD6Pyzjqlq7ND x31MjTmVHaav4GZiON7ztkbUncnERYRVRiLr5iDw9xcS5MVnMg2a07VgY6Ld5Xnl FQ0ZaO7T1HUxl2Lig7kRdX/kIDVNMIgfS1e0H6yJC3b5sbouwSRknu6EoumK/6tG nx8njAYi8t+2DN7d/82Ck1Z3CfY100WONahBAVZeyNtu0p9QH1k0b6srZiCpFTvQ ffl6lXboiYYx3hV/HNoDiIJPTh/zJhjEAzi1MgUKlbt5ImYWJQ0tAnhY16e3+xt5 83ryRFdUmjwxE/0Oh0yi1Nk8VWid+40DCpay9Qm6veyRr+ECviChwoI0OUFsTrfR p2+2ghZHwFf4JTpUNlHdV0Kz0OJ9 =lo26 -----END PGP SIGNATURE----- Merge tag 'for-linus-2022100501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Benjamin Tissoires: - handle of all Logitech Bluetooth HID++ devices in the Logitech HID++ drivers (Bastien Nocera) - fix broken atomic checks in hid-multitouch by adding memory barriers (Andri Yngvason) - better handling of devices with AMD SFH1.1 (Basavaraj Natikar) - better support of Nintendo clone controllers (Icenowy Zheng and Johnothan King) - Support for various RC controllers (Marcus Folkesson) - Add UGEEv2 support in hid-uclogic (XP-PEN Deco Pro S and Parblo A610 PRO) (José Expósito) - some conversions to use dev_groups (Greg Kroah-Hartman) - HID-BPF preparatory patches, mostly to convert blank defines as enums (Benjamin Tissoires) * tag 'for-linus-2022100501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (38 commits) HID: wacom: add three styli to wacom_intuos_get_tool_type HID: amd_sfh: Handle condition of "no sensors" for SFH1.1 HID: amd_sfh: Change dev_err to dev_dbg for additional debug info HID: nintendo: check analog user calibration for plausibility HID: nintendo: deregister home LED when it fails HID: roccat: Fix use-after-free in roccat_read() hid: topre: Add driver fixing report descriptor HID: multitouch: Add memory barriers HID: convert defines of HID class requests into a proper enum HID: export hid_report_type to uapi HID: core: store the unique system identifier in hid_device HID: Add driver for PhoenixRC Flight Controller HID: Add driver for VRC-2 Car Controller HID: sony: Fix double word in comments hid: hid-logitech-hidpp: avoid unnecessary assignments in hidpp_connect_event HID: logitech-hidpp: Detect hi-res scrolling support HID: logitech-hidpp: Remove hard-coded "Sw. Id." for HID++ 2.0 commands HID: logitech-hidpp: Fix "Sw. Id." for HID++ 2.0 commands HID: logitech-hidpp: Remove special-casing of Bluetooth devices HID: logitech-hidpp: Enable HID++ for all the Logitech Bluetooth devices ... |
||
|
Linus Torvalds
|
5d435a3f7b |
media updates for v6.1-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmM9SW4ACgkQCF8+vY7k 4RUFXQ//TDretp4pLjgZRYmNedC3g0yoUObSTQSCasaqcqS7GF4SwNDzkt83m4mm dDkgeMM3OXi7MQMPjnXt3jDxSvNrrwqG4CRjEj+Faw2NzEsv85badD+j+ZoqaSsw SPUy3Ep7XEeinzU27nVMeKhOZ1LNvoI45BSKenl9iLvLsRP5I5ON5J1qlEy7HFvG 5X62isRAZ/IW0wcvYgxZfA8x9QuRrpbCr3bdIonmrBeZLslaFDFPoRP9lBkamf3a nfp9KfC/4ULuAU4hjTY8Oij7GGvLKtUIwEUpou4fdgbDaq96cTkd/KwVxr7Ah4lL ZHtRj0I4GMITmdnfFd6vRfpeK8uzLxj2BssxiuKDcnraHvFxMAmIZSTKHPmTrSPS 2+JZf8dVCpU9Xx8EXWR55Z8G6GTnVPeWk1X5TtKcmgXqyCB996xzI1nZ3LRtcpHk W53NhjtDwX2BqQ51CT576TnW0zN58ZfyhkTHHl2aUnmjd89OgfZzhUS9eAtfA5WO vmpQQqARc4v8+NL4uibyrBbjbrPkWFSMzP2Ed3yTfU2Wd8zjwqE9v3KTMb6Lrlhb 4WJ5SuTHjVDI+TUFy8UvJRiqzyBer+mpDZubBnGp/Z3JE+Eh8mg3oLmfElLwtl2t Vdm8uymOivY3JdZ17Bi33cXrAa9TEkm25LGXWGGfE3oofSHlJwg= =MHQ/ -----END PGP SIGNATURE----- Merge tag 'media/v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New driver for Mediatek MDP V3 - New driver for NXP i.MX DW100 dewarper - Zoran driver got promoted from staging - Hantro and related drivers got promoted from staging - Several VB1 drivers got moved to staging/deprecated (cpia2, fsl-viu, meye, saa7146, av7110, stkwebcam, tm6000, vpfe_capture, davinci, zr364xx) - Usual set of driver fixes, improvements and cleanups * tag 'media/v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (107 commits) media: destage Hantro VPU driver media: platform: mtk-mdp3: add MediaTek MDP3 driver media: dt-binding: mediatek: add bindings for MediaTek CCORR and WDMA media: dt-binding: mediatek: add bindings for MediaTek MDP3 components media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init media: xilinx: video: Add 1X12 greyscale format media: xilinx: csi2rxss: Add 1X12 greyscale format media: staging: media: imx: imx7-media-csi: Increase video mem limit media: uvcvideo: Limit power line control for Sonix Technology media: uvcvideo: Use entity get_cur in uvc_ctrl_set media: uvcvideo: Fix typo 'the the' in comment media: uvcvideo: Use indexed loops in uvc_ctrl_init_ctrl() media: uvcvideo: Fix memory leak in uvc_gpio_parse media: renesas: vsp1: Add support for RZ/G2L VSPD media: renesas: vsp1: Add VSP1_HAS_NON_ZERO_LBA feature bit media: renesas: vsp1: Add support for VSP software version media: renesas: vsp1: Add support to deassert/assert reset line media: dt-bindings: media: renesas,vsp1: Document RZ/G2L VSPD bindings media: meson: vdec: add missing clk_disable_unprepare on error in vdec_hevc_start() media: amphion: fix a bug that vpu core may not resume after suspend ... |
||
|
Linus Torvalds
|
7c989b1da3 |
for-6.1/passthrough-2022-10-04
-----BEGIN PGP SIGNATURE-----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=nwLk
-----END PGP SIGNATURE-----
Merge tag 'for-6.1/passthrough-2022-10-04' of git://git.kernel.dk/linux
Pull passthrough updates from Jens Axboe:
"With these changes, passthrough NVMe support over io_uring now
performs at the same level as block device O_DIRECT, and in many cases
6-8% better.
This contains:
- Add support for fixed buffers for passthrough (Anuj, Kanchan)
- Enable batched allocations and freeing on passthrough, similarly to
what we support on the normal storage path (me)
- Fix from Geert fixing an issue with !CONFIG_IO_URING"
* tag 'for-6.1/passthrough-2022-10-04' of git://git.kernel.dk/linux:
io_uring: Add missing inline to io_uring_cmd_import_fixed() dummy
nvme: wire up fixed buffer support for nvme passthrough
nvme: pass ubuffer as an integer
block: extend functionality to map bvec iterator
block: factor out blk_rq_map_bio_alloc helper
block: rename bio_map_put to blk_mq_map_bio_put
nvme: refactor nvme_alloc_request
nvme: refactor nvme_add_user_metadata
nvme: Use blk_rq_map_user_io helper
scsi: Use blk_rq_map_user_io helper
block: add blk_rq_map_user_io
io_uring: introduce fixed buffer support for io_uring_cmd
io_uring: add io_uring_cmd_import_fixed
nvme: enable batched completions of passthrough IO
nvme: split out metadata vs non metadata end_io uring_cmd completions
block: allow end_io based requests in the completion batch handling
block: change request end_io handler to pass back a return value
block: enable batched allocation for blk_mq_alloc_request()
block: kill deprecated BUG_ON() in the flush handling
|
||
|
Linus Torvalds
|
513389809e |
for-6.1/block-2022-10-03
-----BEGIN PGP SIGNATURE-----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=R05e
-----END PGP SIGNATURE-----
Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Christoph:
- handle number of queue changes in the TCP and RDMA drivers
(Daniel Wagner)
- allow changing the number of queues in nvmet (Daniel Wagner)
- also consider host_iface when checking ip options (Daniel
Wagner)
- don't map pages which can't come from HIGHMEM (Fabio M. De
Francesco)
- avoid unnecessary flush bios in nvmet (Guixin Liu)
- shrink and better pack the nvme_iod structure (Keith Busch)
- add comment for unaligned "fake" nqn (Linjun Bao)
- print actual source IP address through sysfs "address" attr
(Martin Belanger)
- various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang)
- handle effects after freeing the request (Keith Busch)
- copy firmware_rev on each init (Keith Busch)
- restrict management ioctls to admin (Keith Busch)
- ensure subsystem reset is single threaded (Keith Busch)
- report the actual number of tagset maps in nvme-pci (Keith
Busch)
- small fabrics authentication fixups (Christoph Hellwig)
- add common code for tagset allocation and freeing (Christoph
Hellwig)
- stop using the request_queue in nvmet (Christoph Hellwig)
- set min_align_mask before calculating max_hw_sectors (Rishabh
Bhatnagar)
- send a rediscover uevent when a persistent discovery controller
reconnects (Sagi Grimberg)
- misc nvmet-tcp fixes (Varun Prakash, zhenwei pi)
- MD pull request via Song:
- Various raid5 fix and clean up, by Logan Gunthorpe and David
Sloan.
- Raid10 performance optimization, by Yu Kuai.
- sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu)
- IO scheduler switching quisce fix (Keith)
- s390/dasd block driver updates (Stefan)
- support for recovery for the ublk driver (ZiyangZhang)
- rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph)
- blk-mq and null_blk map fixes (Bart)
- various bcache fixes (Coly, Jilin, Jules)
- nbd signal hang fix (Shigeru)
- block writeback throttling fix (Yu)
- optimize the passthrough mapping handling (me)
- prepare block cgroups to being gendisk based (Christoph)
- get rid of an old PSI hack in the block layer, moving it to the
callers instead where it belongs (Christoph)
- blk-throttle fixes and cleanups (Yu)
- misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj,
Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming,
Miaohe, Bart, Coly, Gaosheng
* tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits)
sbitmap: fix lockup while swapping
block: add rationale for not using blk_mq_plug() when applicable
block: adapt blk_mq_plug() to not plug for writes that require a zone lock
s390/dasd: use blk_mq_alloc_disk
blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
nvmet: don't look at the request_queue in nvmet_bdev_set_limits
nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
blk-mq: use quiesced elevator switch when reinitializing queues
block: replace blk_queue_nowait with bdev_nowait
nvme: remove nvme_ctrl_init_connect_q
nvme-loop: use the tagset alloc/free helpers
nvme-loop: store the generic nvme_ctrl in set->driver_data
nvme-loop: initialize sqsize later
nvme-fc: use the tagset alloc/free helpers
nvme-fc: store the generic nvme_ctrl in set->driver_data
nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
nvme-rdma: use the tagset alloc/free helpers
nvme-rdma: store the generic nvme_ctrl in set->driver_data
nvme-tcp: use the tagset alloc/free helpers
nvme-tcp: store the generic nvme_ctrl in set->driver_data
...
|
||
|
Linus Torvalds
|
0a78a376ef |
for-6.1/io_uring-2022-10-03
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmM67S0QHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgppnPEACkBzilBLKwT9MWdUAITwyrMXsAa1R9gsR9 Tb3Xs+mNO2meuycLAUh4LIbb28NNr7/S5rwWet5NRZ71hgv4Q/WA/0EemAGGXYqd +3MEBAWU3FBFkC/cJXCnT8F5yCXYRkT5n/hzCSNEpNKjQ5JnAhHDlWAjgzZRuD/A A+YJjoBVJJuI1wY4I5XCpeQXEmg/Wc1MgXfyHgWVtGKnYrrxibiCnBZnqbAMZNvD hGn1Vl02ooamGTFm/nW/OAt71DtqsjWUCVOHKmlZ+zBUjbUj6FMXmPVV7vCV9o2w PT4Dx3CTc2iXwa8KfEFNPvXBzy0Qfu8edweP/MvZHWHVZREpEAh4cG6GhwW8whD+ 5mPisqmRjZKe0BBS4k/wKN1RXEypSQoTU4EdljfbQPU/usn35lmjMmEXXgs3IhqM fcTdO5ZUOp+CGyzI0Bc7UtS8vilJbX9ynN8G80MUUAZzuQg39MH7lNQYSJSSvJfU OlvzmL3lhRLYM1s/KKiZzdDBoMvC7R4oHmzCveOjQTMIHf6WNyqKFlrWScq2wzpN oRxqt0xiVQ3PFMmFj6N08f145qtbASuF3sKv7dbU3QXTsCAos3wdTdX+PejYApEZ W3dr0TDjNBicLNVPiSj132p0ZRtdZvLGuGVkBD4GPQeH2NwswxMHQAfz8e2lqmA4 9bWG6BM7Yw== =m9kX -----END PGP SIGNATURE----- Merge tag 'for-6.1/io_uring-2022-10-03' of git://git.kernel.dk/linux Pull io_uring updates from Jens Axboe: - Add supported for more directly managed task_work running. This is beneficial for real world applications that end up issuing lots of system calls as part of handling work. Normal task_work will always execute as we transition in and out of the kernel, even for "unrelated" system calls. It's more efficient to defer the handling of io_uring's deferred work until the application wants it to be run, generally in batches. As part of ongoing work to write an io_uring network backend for Thrift, this has been shown to greatly improve performance. (Dylan) - Add IOPOLL support for passthrough (Kanchan) - Improvements and fixes to the send zero-copy support (Pavel) - Partial IO handling fixes (Pavel) - CQE ordering fixes around CQ ring overflow (Pavel) - Support sendto() for non-zc as well (Pavel) - Support sendmsg for zerocopy (Pavel) - Networking iov_iter fix (Stefan) - Misc fixes and cleanups (Pavel, me) * tag 'for-6.1/io_uring-2022-10-03' of git://git.kernel.dk/linux: (56 commits) io_uring/net: fix notif cqe reordering io_uring/net: don't update msg_name if not provided io_uring: don't gate task_work run on TIF_NOTIFY_SIGNAL io_uring/rw: defer fsnotify calls to task context io_uring/net: fix fast_iov assignment in io_setup_async_msg() io_uring/net: fix non-zc send with address io_uring/net: don't skip notifs for failed requests io_uring/rw: don't lose short results on io_setup_async_rw() io_uring/rw: fix unexpected link breakage io_uring/net: fix cleanup double free free_iov init io_uring: fix CQE reordering io_uring/net: fix UAF in io_sendrecv_fail() selftest/net: adjust io_uring sendzc notif handling io_uring: ensure local task_work marks task as running io_uring/net: zerocopy sendmsg io_uring/net: combine fail handlers io_uring/net: rename io_sendzc() io_uring/net: support non-zerocopy sendto io_uring/net: refactor io_setup_async_addr io_uring/net: don't lose partial send_zc on fail ... |
||
|
Linus Torvalds
|
76e4503534 |
for-6.1-tag
-----BEGIN PGP SIGNATURE-----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=NlUz
-----END PGP SIGNATURE-----
Merge tag 'for-6.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"There's a bunch of performance improvements, most notably the FIEMAP
speedup, the new block group tree to speed up mount on large
filesystems, more io_uring integration, some sysfs exports and the
usual fixes and core updates.
Summary:
Performance:
- outstanding FIEMAP speed improvement
- algorithmic change how extents are enumerated leads to orders of
magnitude speed boost (uncached and cached)
- extent sharing check speedup (2.2x uncached, 3x cached)
- add more cancellation points, allowing to interrupt seeking in
files with large number of extents
- more efficient hole and data seeking (4x uncached, 1.3x cached)
- sample results:
256M, 32K extents: 4s -> 29ms (~150x)
512M, 64K extents: 30s -> 59ms (~550x)
1G, 128K extents: 225s -> 120ms (~1800x)
- improved inode logging, especially for directories (on dbench
workload throughput +25%, max latency -21%)
- improved buffered IO, remove redundant extent state tracking,
lowering memory consumption and avoiding rb tree traversal
- add sysfs tunable to let qgroup temporarily skip exact accounting
when deleting snapshot, leading to a speedup but requiring a rescan
after that, will be used by snapper
- support io_uring and buffered writes, until now it was just for
direct IO, with the no-wait semantics implemented in the buffered
write path it now works and leads to speed improvement in IOPS
(2x), throughput (2.2x), latency (depends, 2x to 150x)
- small performance improvements when dropping and searching for
extent maps as well as when flushing delalloc in COW mode
(throughput +5MB/s)
User visible changes:
- new incompatible feature block-group-tree adding a dedicated tree
for tracking block groups, this allows a much faster load during
mount and avoids seeking unlike when it's scattered in the extent
tree items
- this reduces mount time for many-terabyte sized filesystems
- conversion tool will be provided so existing filesystem can also
be updated in place
- to reduce test matrix and feature combinations requires no-holes
and free-space-tree (mkfs defaults since 5.15)
- improved reporting of super block corruption detected by scrub
- scrub also tries to repair super block and does not wait until next
commit
- discard stats and tunables are exported in sysfs
(/sys/fs/btrfs/FSID/discard)
- qgroup status is exported in sysfs
(/sys/sys/fs/btrfs/FSID/qgroups/)
- verify that super block was not modified when thawing filesystem
Fixes:
- FIEMAP fixes
- fix extent sharing status, does not depend on the cached status
where merged
- flush delalloc so compressed extents are reported correctly
- fix alignment of VMA for memory mapped files on THP
- send: fix failures when processing inodes with no links (orphan
files and directories)
- fix race between quota enable and quota rescan ioctl
- handle more corner cases for read-only compat feature verification
- fix missed extent on fsync after dropping extent maps
Core:
- lockdep annotations to validate various transactions states and
state transitions
- preliminary support for fs-verity in send
- more effective memory use in scrub for subpage where sector is
smaller than page
- block group caching progress logic has been removed, load is now
synchronous
- simplify end IO callbacks and bio handling, use chained bios
instead of own tracking
- add no-wait semantics to several functions (tree search, nocow,
flushing, buffered write
- cleanups and refactoring
MM changes:
- export balance_dirty_pages_ratelimited_flags"
* tag 'for-6.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (177 commits)
btrfs: set generation before calling btrfs_clean_tree_block in btrfs_init_new_buffer
btrfs: drop extent map range more efficiently
btrfs: avoid pointless extent map tree search when flushing delalloc
btrfs: remove unnecessary next extent map search
btrfs: remove unnecessary NULL pointer checks when searching extent maps
btrfs: assert tree is locked when clearing extent map from logging
btrfs: remove unnecessary extent map initializations
btrfs: remove the refcount warning/check at free_extent_map()
btrfs: add helper to replace extent map range with a new extent map
btrfs: move open coded extent map tree deletion out of inode eviction
btrfs: use cond_resched_rwlock_write() during inode eviction
btrfs: use extent_map_end() at btrfs_drop_extent_map_range()
btrfs: move btrfs_drop_extent_cache() to extent_map.c
btrfs: fix missed extent on fsync after dropping extent maps
btrfs: remove stale prototype of btrfs_write_inode
btrfs: enable nowait async buffered writes
btrfs: assert nowait mode is not used for some btree search functions
btrfs: make btrfs_buffered_write nowait compatible
btrfs: plumb NOWAIT through the write path
btrfs: make lock_and_cleanup_extent_if_need nowait compatible
...
|
||
|
Linus Torvalds
|
ff6862c23d |
ARM: driver updates for 6.1
The drivers branch for 6.1 is a bit larger than for most releases. Most
of the changes come from SoC maintainers for the drivers/soc subsystem:
- A new driver for error handling on the NVIDIA Tegra
'control backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip
SoCs, various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM
driver, the Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas,
Tegra, Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers that
merge updates this way:
- Various updates and new drivers in the memory controller
subsystem for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A
v1.1 specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem
-----BEGIN PGP SIGNATURE-----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=WX9J
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"The drivers branch for 6.1 is a bit larger than for most releases.
Most of the changes come from SoC maintainers for the drivers/soc
subsystem:
- A new driver for error handling on the NVIDIA Tegra 'control
backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip SoCs,
various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the
Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra,
Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers
that merge updates this way:
- Various updates and new drivers in the memory controller subsystem
for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A v1.1
specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem"
* tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits)
ARM: remove check for CONFIG_DEBUG_LL_SER3
firmware/psci: Add debugfs support to ease debugging
firmware/psci: Print a warning if PSCI doesn't accept PC mode
dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props
dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros
dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name
dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support
soc: sunxi: sram: Add support for the D1 system control
soc: sunxi: sram: Export the LDO control register
soc: sunxi: sram: Save a pointer to the OF match data
soc: sunxi: sram: Return void from the release function
soc: apple: rtkit: Add apple_rtkit_poll
soc: imx: add i.MX93 media blk ctrl driver
soc: imx: add i.MX93 SRC power domain driver
soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell
soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets
soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl
soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR
soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
soc: imx: add icc paths for i.MX8MP media blk ctrl
...
|
||
|
Linus Torvalds
|
833477fce7 |
sound updates for 6.1-rc1
Majority of changes at this PR are ASoC drivers (SOF, Intel, AMD,
Mediatek, Qualcomm, TI, Apple Silicon, etc), while we see a few
small fixes in ALSA / ASoC core side, too.
Here are highlights:
Core:
- A new string helper parse_int_array_user() and cleanups with it
- Continued cleanup of memory allocation helpers
- PCM core optimization and hardening
- Continued ASoC core code cleanups
ASoC:
- Improvements to the SOF IPC4 code, especially around trace
- Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple
Silicon systems, Everest ES8326, Intel Sky Lake and Kaby Lake,
Mediatek MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP,
SM8250 and SM8450 and Texas Instruments SRC4392
HD- and USB-audio:
- Cleanups for unification of hda-ext bus
- HD-audio HDMI codec driver cleanups
- Continued endpoint management fixes for USB-audio
- New quirks as usual
-----BEGIN PGP SIGNATURE-----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=EWRA
-----END PGP SIGNATURE-----
Merge tag 'sound-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of changes are ASoC drivers (SOF, Intel, AMD, Mediatek,
Qualcomm, TI, Apple Silicon, etc), while we see a few small fixes in
ALSA / ASoC core side, too.
Here are highlights:
Core:
- A new string helper parse_int_array_user() and cleanups with it
- Continued cleanup of memory allocation helpers
- PCM core optimization and hardening
- Continued ASoC core code cleanups
ASoC:
- Improvements to the SOF IPC4 code, especially around trace
- Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple
Silicon systems, Everest ES8326, Intel Sky Lake and Kaby Lake,
Mediatek MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP,
SM8250 and SM8450 and Texas Instruments SRC4392
HD- and USB-audio:
- Cleanups for unification of hda-ext bus
- HD-audio HDMI codec driver cleanups
- Continued endpoint management fixes for USB-audio
- New quirks as usual"
* tag 'sound-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (422 commits)
ALSA: hda: Fix position reporting on Poulsbo
ALSA: hda/hdmi: Don't skip notification handling during PM operation
ASoC: rockchip: i2s: use regmap_read_poll_timeout_atomic to poll I2S_CLR
ASoC: dt-bindings: Document audio OF graph dai-tdm-slot-num dai-tdm-slot-width props
ASoC: qcom: fix unmet direct dependencies for SND_SOC_QDSP6
ALSA: usb-audio: Fix potential memory leaks
ALSA: usb-audio: Fix NULL dererence at error path
ASoC: mediatek: mt8192-mt6359: Set the driver name for the card
ALSA: hda/realtek: More robust component matching for CS35L41
ASoC: Intel: sof_rt5682: remove SOF_RT1015_SPEAKER_AMP_100FS flag
ASoC: nau8825: Add TDM support
ASoC: core: clarify the driver name initialization
ASoC: mt6660: Fix PM disable depth imbalance in mt6660_i2c_probe
ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe
ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe
ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe
ASoC: wcd-mbhc-v2: Revert "ASoC: wcd-mbhc-v2: use pm_runtime_resume_and_get()"
ASoC: mediatek: mt8186: Fix spelling mistake "slect" -> "select"
ALSA: hda/realtek: Add quirk for HP Zbook Firefly 14 G9 model
ALSA: asihpi - Remove unused struct hpi_subsys_response
...
|
||
|
Linus Torvalds
|
7e6739b933 |
drm pull for 6.1-rc1
core:
- convert selftests to kunit
- managed init for more objects
- move to idr_init_base
- rename fb and gem cma helpers to dma
- hide unregistered connectors from getconnector ioctl
- DSC passthrough aux support
- backlight handling improvements
- add dma_resv_assert_held to vmap/vunmap
edid:
- move luminance calculation to core
fbdev:
- fix aperture helper usage
fourcc:
- add more format helpers
- add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx, DRM_FORMAT_Dxx
- add packed AYUV8888, XYUV8888
- add some kunit tests
ttm:
- allow bos without backing store
- rewrite placement to use intersect/compatible functions
dma-buf:
- docs update
- improve signalling when debugging
udmabuf:
- fix failure path GPF
dp:
- drop dp/mst legacy code
- atomic mst state support
- audio infoframe packing
panel:
- Samsung LTL101AL01
- B120XAN01.0
- R140NWF5 RH
- DMT028VGHMCMI-1A T
- AUO B133UAN02.1
- IVO M133NW4J-R3
- Innolux N120ACA-EA1
amdgpu:
- Gang submit support
- Mode2 reset for RDNA2
- New IP support:
DCN 3.1.4, 3.2
SMU 13.x
NBIO 7.7
GC 11.x
PSP 13.x
SDMA 6.x
GMC 11.x
- DSC passthrough support
- PSP fixes for TA support
- vangogh GFXOFF stats
- clang fixes
- gang submit CS cleanup prep work
- fix VRAM eviction issues
amdkfd:
- GC 10.3 IP ISA fixes
- fix CRIU regression
- CPU fault on COW mapping fixes
i915:
- align fw versioning with kernel practices
- add display substruct to i915 private
- add initial runtime info to driver info
- split out HDCP and backlight registers
- MEI XeHP SDV GSC support
- add per-gt sysfs defaults
- TLB invalidation improvements
- Disable PCI BAR resize on 32-bit
- GuC firmware updates and compat changes
- GuC log timestamp translation
- DG2 preemption workaround changes
- DG2 improved HDMI pixel clocks support
- PCI BAR sanity checks
- Enable DC5 on DG2
- DG2 DMC fw bumped
- ADL-S PCI ID added
- Meteorlake enablement
- Rename ggtt_view to gtt_view
- host RPS fixes
- release mmaps on rpm suspend on discrete
- clocking and dpll refactoring
- VBT definitions and parsing updates
- SKL watermark code extracted to separate file
- allow seamless M/N changes on eDP panels
- BUG_ON removal and cleanups
msm:
- DPU: simplified VBIF configuration
- cleanup CTL interfaces
- DSI: removed unused msm_display_dsc_config struct
- switch regulator calls to new API
- switched to PANEL_BRIDGE for direct attached panels
- DSI_PHY: convert drivers to parent_hws
- DP: cleanup pixel_rate handling
- HDMI: turned hdmi-phy-8996 into OF clk provider
- misc dt-bindings fixes
- choose eDP as primary display if it's available
- support getting interconnects from either the mdss or the mdp5/dpu
device nodes
- gem: Shrinker + LRU re-work:
- adds a shared GEM LRU+shrinker helper and moves msm over to that
- reduces lock contention between retire and submit by avoiding the
need to acquire obj lock in retire path (and instead using resv
seeing obj's busyness in the shrinker
- fix reclaim vs submit issues
- GEM fault injection for triggering userspace error paths
- Map/unmap optimization
- Improved robustness for a6xx GPU recovery
virtio:
- Improve error and edge conditions handling
- Convert to use managed helpers
- stop exposing LINEAR modifier
mgag200:
- split modeset handling per model
udl:
- suspend/disconnect handling improvements
vc4:
- rework HDMI power up
- depend on PM
- better unplugging support
ast:
- resolution handling improvements
ingenic:
- Add JZ4760(B) support
- avoid a modeset when sharpness property is unchanged
- use the new PM ops
it6505:
- power seq and clock updates
ssd130x:
- regmap bulk write
- use atomic helpers instead of simple helpers
via:
- rename via_drv to via_dri1, consolidate all code.
radeon:
- drop DP MST experimental support
- delayed work flush fix
- use time_after
ti-sn65dsi86:
- DP support
mediatek:
- MT8195 DP support
- drop of_gpio header
- remove unneeded result
- small DP code improvements
vkms:
- RGB565, XRGB64 and ARGB64 support
sun4i:
- tv: convert to atomic
rcar-du:
- Synopsys DW HDMI bridge DT bindings update
exynos:
- use drm_display_info.is_hdmi
- correct return of mixer_mode_valid and hdmi_mode_valid
omap:
- refcounting fix
rockchip:
- RK3568 support
- RK3399 gamma support
-----BEGIN PGP SIGNATURE-----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=u/MJ
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Lots of stuff all over, some new AMD IP support and gang submit
support. i915 has further DG2 and Meteorlake pieces, and a bunch of
i915 display refactoring. msm has a shrinker rework. There are also a
bunch of conversions to use kunit.
This has two external pieces, some MEI changes needed for future Intel
discrete GPUs. These should be acked by Greg. There is also a cross
maintainer shared tree with some backlight rework from Hans in here.
Core:
- convert selftests to kunit
- managed init for more objects
- move to idr_init_base
- rename fb and gem cma helpers to dma
- hide unregistered connectors from getconnector ioctl
- DSC passthrough aux support
- backlight handling improvements
- add dma_resv_assert_held to vmap/vunmap
edid:
- move luminance calculation to core
fbdev:
- fix aperture helper usage
fourcc:
- add more format helpers
- add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx, DRM_FORMAT_Dxx
- add packed AYUV8888, XYUV8888
- add some kunit tests
ttm:
- allow bos without backing store
- rewrite placement to use intersect/compatible functions
dma-buf:
- docs update
- improve signalling when debugging
udmabuf:
- fix failure path GPF
dp:
- drop dp/mst legacy code
- atomic mst state support
- audio infoframe packing
panel:
- Samsung LTL101AL01
- B120XAN01.0
- R140NWF5 RH
- DMT028VGHMCMI-1A T
- AUO B133UAN02.1
- IVO M133NW4J-R3
- Innolux N120ACA-EA1
amdgpu:
- Gang submit support
- Mode2 reset for RDNA2
- New IP support:
DCN 3.1.4, 3.2
SMU 13.x
NBIO 7.7
GC 11.x
PSP 13.x
SDMA 6.x
GMC 11.x
- DSC passthrough support
- PSP fixes for TA support
- vangogh GFXOFF stats
- clang fixes
- gang submit CS cleanup prep work
- fix VRAM eviction issues
amdkfd:
- GC 10.3 IP ISA fixes
- fix CRIU regression
- CPU fault on COW mapping fixes
i915:
- align fw versioning with kernel practices
- add display substruct to i915 private
- add initial runtime info to driver info
- split out HDCP and backlight registers
- MEI XeHP SDV GSC support
- add per-gt sysfs defaults
- TLB invalidation improvements
- Disable PCI BAR resize on 32-bit
- GuC firmware updates and compat changes
- GuC log timestamp translation
- DG2 preemption workaround changes
- DG2 improved HDMI pixel clocks support
- PCI BAR sanity checks
- Enable DC5 on DG2
- DG2 DMC fw bumped
- ADL-S PCI ID added
- Meteorlake enablement
- Rename ggtt_view to gtt_view
- host RPS fixes
- release mmaps on rpm suspend on discrete
- clocking and dpll refactoring
- VBT definitions and parsing updates
- SKL watermark code extracted to separate file
- allow seamless M/N changes on eDP panels
- BUG_ON removal and cleanups
msm:
- DPU:
simplified VBIF configuration
cleanup CTL interfaces
- DSI:
removed unused msm_display_dsc_config struct
switch regulator calls to new API
switched to PANEL_BRIDGE for direct attached panels
- DSI_PHY: convert drivers to parent_hws
- DP: cleanup pixel_rate handling
- HDMI: turned hdmi-phy-8996 into OF clk provider
- misc dt-bindings fixes
- choose eDP as primary display if it's available
- support getting interconnects from either the mdss or the mdp5/dpu
device nodes
- gem: Shrinker + LRU re-work:
- adds a shared GEM LRU+shrinker helper and moves msm over to that
- reduce lock contention between retire and submit by avoiding the
need to acquire obj lock in retire path (and instead using resv
seeing obj's busyness in the shrinker
- fix reclaim vs submit issues
- GEM fault injection for triggering userspace error paths
- Map/unmap optimization
- Improved robustness for a6xx GPU recovery
virtio:
- improve error and edge conditions handling
- convert to use managed helpers
- stop exposing LINEAR modifier
mgag200:
- split modeset handling per model
udl:
- suspend/disconnect handling improvements
vc4:
- rework HDMI power up
- depend on PM
- better unplugging support
ast:
- resolution handling improvements
ingenic:
- add JZ4760(B) support
- avoid a modeset when sharpness property is unchanged
- use the new PM ops
it6505:
- power seq and clock updates
ssd130x:
- regmap bulk write
- use atomic helpers instead of simple helpers
via:
- rename via_drv to via_dri1, consolidate all code.
radeon:
- drop DP MST experimental support
- delayed work flush fix
- use time_after
ti-sn65dsi86:
- DP support
mediatek:
- MT8195 DP support
- drop of_gpio header
- remove unneeded result
- small DP code improvements
vkms:
- RGB565, XRGB64 and ARGB64 support
sun4i:
- tv: convert to atomic
rcar-du:
- Synopsys DW HDMI bridge DT bindings update
exynos:
- use drm_display_info.is_hdmi
- correct return of mixer_mode_valid and hdmi_mode_valid
omap:
- refcounting fix
rockchip:
- RK3568 support
- RK3399 gamma support"
* tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm: (1374 commits)
drm/amdkfd: Fix UBSAN shift-out-of-bounds warning
drm/amdkfd: Track unified memory when switching xnack mode
drm/amdgpu: Enable sram on vcn_4_0_2
drm/amdgpu: Enable VCN DPG for GC11_0_1
drm/msm: Fix build break with recent mm tree
drm/panel: simple: Use dev_err_probe() to simplify code
drm/panel: panel-edp: Use dev_err_probe() to simplify code
drm/panel: simple: Add Multi-Inno Technology MI0800FT-9
dt-bindings: display: simple: Add Multi-Inno Technology MI0800FT-9 panel
drm/amdgpu: correct the memcpy size for ip discovery firmware
drm/amdgpu: Skip put_reset_domain if it doesn't exist
drm/amdgpu: remove switch from amdgpu_gmc_noretry_set
drm/amdgpu: Fix mc_umc_status used uninitialized warning
drm/amd/display: Prevent OTG shutdown during PSR SU
drm/amdgpu: add page retirement handling for CPU RAS
drm/amdgpu: use RAS error address convert api in mca notifier
drm/amdgpu: support to convert dedicated umc mca address
drm/amdgpu: export umc error address convert interface
drm/amdgpu: fix sdma v4 init microcode error
drm/amd/display: fix array-bounds error in dc_stream_remove_writeback()
...
|
||
Benjamin Tissoires
|
edd1533d3c |
Merge branch 'for-6.1/logitech' into for-linus
- Add hanlding of all Bluetooth HID++ devices and fixes in hid++ (Bastien Nocera) |
||
|
Linus Torvalds
|
0326074ff4 |
Networking changes for 6.1.
Core
----
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO.
This significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF
---
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions.
Expose crash_kexec() to allow BPF to trigger a kernel dump.
Use CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs.
Only structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols
---------
- WiFi: more Extremely High Throughput (EHT) and Multi-Link
Operation (MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state
and RST packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API
----------
- Allow selecting the conduit interface used by each port
in DSA switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting
per traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one
of the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much
as possible. It's one of those magic knobs which seemed like
a good idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers
----------------------
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers
-------
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay
window offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Gsio
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF:
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols:
- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API:
- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one of
the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers:
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers:
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support"
* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...
|
||
|
Linus Torvalds
|
522667b24f |
Landlock updates for v6.1-rc1
-----BEGIN PGP SIGNATURE----- iIYEABYIAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCYzxenhAcbWljQGRpZ2lr b2QubmV0AAoJEOXj0OiMgvbSYpMA/iWIaLAS5P1Hh5/42NKGjsxwt9sNM6tKivYP gJidPsq5AQCzj/21kMLPVMxCauKvMRPs84wvLd6W7JwjJvGsigefCg== =pDda -----END PGP SIGNATURE----- Merge tag 'landlock-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull landlock updates from Mickaël Salaün: "Improve user help for Landlock (documentation and sample)" * tag 'landlock-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: landlock: Fix documentation style landlock: Slightly improve documentation and fix spelling samples/landlock: Print hints about ABI versions |
||
|
Linus Torvalds
|
725737e7c2 |
STATX_DIOALIGN for 6.1
Make statx() support reporting direct I/O (DIO) alignment information. This provides a generic interface for userspace programs to determine whether a file supports DIO, and if so with what alignment restrictions. Specifically, STATX_DIOALIGN works on block devices, and on regular files when their containing filesystem has implemented support. An interface like this has been requested for years, since the conditions for when DIO is supported in Linux have gotten increasingly complex over time. Today, DIO support and alignment requirements can be affected by various filesystem features such as multi-device support, data journalling, inline data, encryption, verity, compression, checkpoint disabling, log-structured mode, etc. Further complicating things, Linux v6.0 relaxed the traditional rule of DIO needing to be aligned to the block device's logical block size; now user buffers (but not file offsets) only need to be aligned to the DMA alignment. The approach of uplifting the XFS specific ioctl XFS_IOC_DIOINFO was discarded in favor of creating a clean new interface with statx(). For more information, see the individual commits and the man page update https://lore.kernel.org/r/20220722074229.148925-1-ebiggers@kernel.org. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYzpV2xQcZWJpZ2dlcnNA Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKwF1AQDetPX5hyuq0/mwikOywLTTJsoHgGY5 euO+dISqjH/InwD9HAQqfPRkdM1j4ml82BjjkAfrhzZXOOWPKJm0zOhMIQg= =0Oav -----END PGP SIGNATURE----- Merge tag 'statx-dioalign-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux Pull STATX_DIOALIGN support from Eric Biggers: "Make statx() support reporting direct I/O (DIO) alignment information. This provides a generic interface for userspace programs to determine whether a file supports DIO, and if so with what alignment restrictions. Specifically, STATX_DIOALIGN works on block devices, and on regular files when their containing filesystem has implemented support. An interface like this has been requested for years, since the conditions for when DIO is supported in Linux have gotten increasingly complex over time. Today, DIO support and alignment requirements can be affected by various filesystem features such as multi-device support, data journalling, inline data, encryption, verity, compression, checkpoint disabling, log-structured mode, etc. Further complicating things, Linux v6.0 relaxed the traditional rule of DIO needing to be aligned to the block device's logical block size; now user buffers (but not file offsets) only need to be aligned to the DMA alignment. The approach of uplifting the XFS specific ioctl XFS_IOC_DIOINFO was discarded in favor of creating a clean new interface with statx(). For more information, see the individual commits and the man page update[1]" Link: https://lore.kernel.org/r/20220722074229.148925-1-ebiggers@kernel.org [1] * tag 'statx-dioalign-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: xfs: support STATX_DIOALIGN f2fs: support STATX_DIOALIGN f2fs: simplify f2fs_force_buffered_io() f2fs: move f2fs_force_buffered_io() into file.c ext4: support STATX_DIOALIGN fscrypt: change fscrypt_dio_supported() to prepare for STATX_DIOALIGN vfs: support STATX_DIOALIGN on block devices statx: add direct I/O alignment information |
||
|
Linus Torvalds
|
f4309528f3 |
dlm for 6.1
This set of commits includes: . Fix a couple races found with a new torture test. . Improve errors when api functions are used incorrectly. . Improve tracing for lock requests from user space. . Fix use after free in recently added tracing code. . Small internal code cleanups. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJjOyfeAAoJEDgbc8f8gGmqHF4QALKGo+95JGzfXN37dNL2ve8L DAKxESYIwaTEWuKxmD4AGogClEl55UoC8kxMB3dHwLZEd4U0v5ZDULR6NUYXMpos 6miaoF+pJfBnpNRqpCieWRW5dYXD4TwSdquv5rUSmUBrdOSy34s/nORWB4kL443K hFPcbo5Mv1L0W70/+gdj1uBlBsenZxnXu6aEmrckONqwj9Q2SBjJTik9WuNwh+FF tEcmUt8kDanGkbwtMCxnbT3HDOdfQyW+qq4IJ6MOYHlW9Cqbp9QUvAIho4DEpr7f eGurQ/urSD3dltzuYQcZ81zGhaGxzaRt5d2AEHRrGugQ2ZvnsG74oSAmEINZTSw4 RV2EXyJ4hXcXK/yJXo3fGzFm2/5JFvYhnvddo6wts3vQZHwefExIRCHVz2cJL9eS gFpfFu4uB8z7w7l9s9LJKv7cTriaDd1WHuIWZGonz3wlFSUOn7IxunDxM3Hc5YO3 okawhr6sWe03fFcKsw1WeWymfDUwmk/7OV15OSDanItAwX5vkBYDBvAcA/cwm8cj P0Vb3c1/Sf1IjjHGGA13vHpD1JXJ7FHafg6jyWmjJNqaS+wtShvs2As9MqbtSWMb o2OcYTEEzME4mMIXZzVlKP7hhkLMaVR5PwGmbPovlyAkEUX0soH7nefyLMAqP3JG 7VZYV46VCL7wm3yjrKYw =sL1G -----END PGP SIGNATURE----- Merge tag 'dlm-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm updates from David Teigland: - Fix a couple races found with a new torture test - Improve errors when api functions are used incorrectly - Improve tracing for lock requests from user space - Fix use after free in recently added tracing cod. - Small internal code cleanups * tag 'dlm-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: fs: dlm: fix possible use after free if tracing fs: dlm: const void resource name parameter fs: dlm: LSFL_CB_DELAY only for kernel lockspaces fs: dlm: remove DLM_LSFL_FS from uapi fs: dlm: trace user space callbacks fs: dlm: change ls_clear_proc_locks to spinlock fs: dlm: remove dlm_del_ast prototype fs: dlm: handle rcom in else if branch fs: dlm: allow lockspaces have zero lvblen fs: dlm: fix invalid derefence of sb_lvbptr fs: dlm: handle -EINVAL as log_error() fs: dlm: use __func__ for function name fs: dlm: handle -EBUSY first in unlock validation fs: dlm: handle -EBUSY first in lock arg validation fs: dlm: fix race between test_bit() and queue_work() fs: dlm: fix race in lowcomms |
||
Jakub Kicinski
|
e52f7c1ddf |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Merge in the left-over fixes before the net-next pull-request. Conflicts: drivers/net/ethernet/mediatek/mtk_ppe.c |
||
Oleksij Rempel
|
18ff0bcda6 |
ethtool: add interface to interact with Ethernet Power Equipment
Add interface to support Power Sourcing Equipment. At current step it provides generic way to address all variants of PSE devices as defined in IEEE 802.3-2018 but support only objects specified for IEEE 802.3-2018 104.4 PoDL Power Sourcing Equipment (PSE). Currently supported and mandatory objects are: IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState IEEE 802.3-2018 30.15.1.2.1 acPoDLPSEAdminControl This is minimal interface needed to control PSE on each separate ethernet port but it provides not all mandatory objects specified in IEEE 802.3-2018. Since "PoDL PSE" and "PSE" have similar names, but some different values I decide to not merge them and keep separate naming schema. This should allow as to be as close to IEEE 802.3 spec as possible and avoid name conflicts in the future. This implementation is connected to PHYs instead of MACs because PSE auto classification can potentially interfere with PHY auto negotiation. So, may be some extra PHY related initialization will be needed. With WIP version of ethtools interaction with PSE capable link looks as following: $ ip l ... 5: t1l1@eth0: <BROADCAST,MULTICAST> .. ... $ ethtool --show-pse t1l1 PSE attributs for t1l1: PoDL PSE Admin State: disabled PoDL PSE Power Detection Status: disabled $ ethtool --set-pse t1l1 podl-pse-admin-control enable $ ethtool --show-pse t1l1 PSE attributs for t1l1: PoDL PSE Admin State: enabled PoDL PSE Power Detection Status: delivering power Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
ad061cf422 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says: ==================== pull-request: bpf 2022-10-03 We've added 10 non-merge commits during the last 23 day(s) which contain a total of 14 files changed, 130 insertions(+), 69 deletions(-). The main changes are: 1) Fix dynptr helper API to gate behind CAP_BPF given it was not intended for unprivileged BPF programs, from Kumar Kartikeya Dwivedi. 2) Fix need_wakeup flag inheritance from umem buffer pool for shared xsk sockets, from Jalal Mostafa. 3) Fix truncated last_member_type_id in btf_struct_resolve() which had a wrong storage type, from Lorenz Bauer. 4) Fix xsk back-pressure mechanism on tx when amount of produced descriptors to CQ is lower than what was grabbed from xsk tx ring, from Maciej Fijalkowski. 5) Fix wrong cgroup attach flags being displayed to effective progs, from Pu Lehui. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: xsk: Inherit need_wakeup flag for shared sockets bpf: Gate dynptr API behind CAP_BPF selftests/bpf: Adapt cgroup effective query uapi change bpftool: Fix wrong cgroup attach flags being assigned to effective progs bpf, cgroup: Reject prog_attach_flags array when effective query bpf: Ensure correct locking around vulnerable function find_vpid() bpf: btf: fix truncated last_member_type_id in btf_struct_resolve selftests/xsk: Add missing close() on netns fd xsk: Fix backpressure mechanism on Tx MAINTAINERS: Add include/linux/tnum.h to BPF CORE ==================== Link: https://lore.kernel.org/r/20221003201957.13149-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
a08d97a193 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-10-03
We've added 143 non-merge commits during the last 27 day(s) which contain
a total of 151 files changed, 8321 insertions(+), 1402 deletions(-).
The main changes are:
1) Add kfuncs for PKCS#7 signature verification from BPF programs, from Roberto Sassu.
2) Add support for struct-based arguments for trampoline based BPF programs,
from Yonghong Song.
3) Fix entry IP for kprobe-multi and trampoline probes under IBT enabled, from Jiri Olsa.
4) Batch of improvements to veristat selftest tool in particular to add CSV output,
a comparison mode for CSV outputs and filtering, from Andrii Nakryiko.
5) Add preparatory changes needed for the BPF core for upcoming BPF HID support,
from Benjamin Tissoires.
6) Support for direct writes to nf_conn's mark field from tc and XDP BPF program
types, from Daniel Xu.
7) Initial batch of documentation improvements for BPF insn set spec, from Dave Thaler.
8) Add a new BPF_MAP_TYPE_USER_RINGBUF map which provides single-user-space-producer /
single-kernel-consumer semantics for BPF ring buffer, from David Vernet.
9) Follow-up fixes to BPF allocator under RT to always use raw spinlock for the BPF
hashtab's bucket lock, from Hou Tao.
10) Allow creating an iterator that loops through only the resources of one
task/thread instead of all, from Kui-Feng Lee.
11) Add support for kptrs in the per-CPU arraymap, from Kumar Kartikeya Dwivedi.
12) Add a new kfunc helper for nf to set src/dst NAT IP/port in a newly allocated CT
entry which is not yet inserted, from Lorenzo Bianconi.
13) Remove invalid recursion check for struct_ops for TCP congestion control BPF
programs, from Martin KaFai Lau.
14) Fix W^X issue with BPF trampoline and BPF dispatcher, from Song Liu.
15) Fix percpu_counter leakage in BPF hashtab allocation error path, from Tetsuo Handa.
16) Various cleanups in BPF selftests to use preferred ASSERT_* macros, from Wang Yufen.
17) Add invocation for cgroup/connect{4,6} BPF programs for ICMP pings, from YiFei Zhu.
18) Lift blinding decision under bpf_jit_harden = 1 to bpf_capable(), from Yauheni Kaliuta.
19) Various libbpf fixes and cleanups including a libbpf NULL pointer deref, from Xin Liu.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (143 commits)
net: netfilter: move bpf_ct_set_nat_info kfunc in nf_nat_bpf.c
Documentation: bpf: Add implementation notes documentations to table of contents
bpf, docs: Delete misformatted table.
selftests/xsk: Fix double free
bpftool: Fix error message of strerror
libbpf: Fix overrun in netlink attribute iteration
selftests/bpf: Fix spelling mistake "unpriviledged" -> "unprivileged"
samples/bpf: Fix typo in xdp_router_ipv4 sample
bpftool: Remove unused struct event_ring_info
bpftool: Remove unused struct btf_attach_point
bpf, docs: Add TOC and fix formatting.
bpf, docs: Add Clang note about BPF_ALU
bpf, docs: Move Clang notes to a separate file
bpf, docs: Linux byteswap note
bpf, docs: Move legacy packet instructions to a separate file
selftests/bpf: Check -EBUSY for the recurred bpf_setsockopt(TCP_CONGESTION)
bpf: tcp: Stop bpf_setsockopt(TCP_CONGESTION) in init ops to recur itself
bpf: Refactor bpf_setsockopt(TCP_CONGESTION) handling into another function
bpf: Move the "cdg" tcp-cc check to the common sol_tcp_sockopt()
bpf: Add __bpf_prog_{enter,exit}_struct_ops for struct_ops trampoline
...
====================
Link: https://lore.kernel.org/r/20221003194915.11847-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
David S. Miller
|
42e8e6d906 |
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says: ==================== 1) Refactor selftests to use an array of structs in xfrm_fill_key(). From Gautam Menghani. 2) Drop an unused argument from xfrm_policy_match. From Hongbin Wang. 3) Support collect metadata mode for xfrm interfaces. From Eyal Birger. 4) Add netlink extack support to xfrm. From Sabrina Dubroca. Please note, there is a merge conflict in: include/net/dst_metadata.h between commit: |
||
Anuj Gupta
|
9cda70f622 |
io_uring: introduce fixed buffer support for io_uring_cmd
Add IORING_URING_CMD_FIXED flag that is to be used for sending io_uring command with previously registered buffers. User-space passes the buffer index in sqe->buf_index, same as done in read/write variants that uses fixed buffers. Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> Signed-off-by: Kanchan Joshi <joshi.k@samsung.com> Link: https://lore.kernel.org/r/20220930062749.152261-3-anuj20.g@samsung.com [axboe: shuffle valid flags check before acting on it] Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Jens Axboe
|
5853a7b551 |
Merge branch 'for-6.1/io_uring' into for-6.1/passthrough
* for-6.1/io_uring: (56 commits) io_uring/net: fix notif cqe reordering io_uring/net: don't update msg_name if not provided io_uring: don't gate task_work run on TIF_NOTIFY_SIGNAL io_uring/rw: defer fsnotify calls to task context io_uring/net: fix fast_iov assignment in io_setup_async_msg() io_uring/net: fix non-zc send with address io_uring/net: don't skip notifs for failed requests io_uring/rw: don't lose short results on io_setup_async_rw() io_uring/rw: fix unexpected link breakage io_uring/net: fix cleanup double free free_iov init io_uring: fix CQE reordering io_uring/net: fix UAF in io_sendrecv_fail() selftest/net: adjust io_uring sendzc notif handling io_uring: ensure local task_work marks task as running io_uring/net: zerocopy sendmsg io_uring/net: combine fail handlers io_uring/net: rename io_sendzc() io_uring/net: support non-zerocopy sendto io_uring/net: refactor io_setup_async_addr io_uring/net: don't lose partial send_zc on fail ... |
||
|
Jens Axboe
|
736feaa3a0 |
Merge branch 'for-6.1/block' into for-6.1/passthrough
* for-6.1/block: (162 commits) sbitmap: fix lockup while swapping block: add rationale for not using blk_mq_plug() when applicable block: adapt blk_mq_plug() to not plug for writes that require a zone lock s390/dasd: use blk_mq_alloc_disk blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep nvmet: don't look at the request_queue in nvmet_bdev_set_limits nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all blk-mq: use quiesced elevator switch when reinitializing queues block: replace blk_queue_nowait with bdev_nowait nvme: remove nvme_ctrl_init_connect_q nvme-loop: use the tagset alloc/free helpers nvme-loop: store the generic nvme_ctrl in set->driver_data nvme-loop: initialize sqsize later nvme-fc: use the tagset alloc/free helpers nvme-fc: store the generic nvme_ctrl in set->driver_data nvme-fc: keep ctrl->sqsize in sync with opts->queue_size nvme-rdma: use the tagset alloc/free helpers nvme-rdma: store the generic nvme_ctrl in set->driver_data nvme-tcp: use the tagset alloc/free helpers nvme-tcp: store the generic nvme_ctrl in set->driver_data ... Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Vladimir Oltean
|
a54fc09e4c |
net/sched: taprio: allow user input of per-tc max SDU
IEEE 802.1Q clause 12.29.1.1 "The queueMaxSDUTable structure and data types" and 8.6.8.4 "Enhancements for scheduled traffic" talk about the existence of a per traffic class limitation of maximum frame sizes, with a fallback on the port-based MTU. As far as I am able to understand, the 802.1Q Service Data Unit (SDU) represents the MAC Service Data Unit (MSDU, i.e. L2 payload), excluding any number of prepended VLAN headers which may be otherwise present in the MSDU. Therefore, the queueMaxSDU is directly comparable to the device MTU (1500 means L2 payload sizes are accepted, or frame sizes of 1518 octets, or 1522 plus one VLAN header). Drivers which offload this are directly responsible of translating into other units of measurement. To keep the fast path checks optimized, we keep 2 arrays in the qdisc, one for max_sdu translated into frame length (so that it's comparable to skb->len), and another for offloading and for dumping back to the user. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
5493a2ad0d |
docs: netlink: clarify the historical baggage of Netlink flags
nlmsg_flags are full of historical baggage, inconsistencies and strangeness. Try to document it more thoroughly. Explain the meaning of the ECHO flag (and while at it clarify the comment in the uAPI). Handwave a little about the NEW request flags and how they make sense on the surface but cater to really old paradigm before commands were a thing. I will add more notes on how to make use of ECHO and discouragement for reuse of flags to the kernel-side documentation. Link: https://lore.kernel.org/r/20220927212306.823862-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
accc3b4a57 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Mickaël Salaün
|
2fff00c81d
|
landlock: Fix documentation style
It seems that all code should use double backquotes, which is also used to convert "%" defines. Let's use an homogeneous style and remove all use of simple backquotes (which should only be used for emphasis). Cc: Günther Noack <gnoack3000@gmail.com> Cc: Paul Moore <paul@paul-moore.com> Signed-off-by: Mickaël Salaün <mic@digikod.net> Link: https://lore.kernel.org/r/20220923154207.3311629-4-mic@digikod.net |
||
Kui-Feng Lee
|
21fb6f2aa3 |
bpf: Handle bpf_link_info for the parameterized task BPF iterators.
Add new fields to bpf_link_info that users can query it through bpf_obj_get_info_by_fd(). Signed-off-by: Kui-Feng Lee <kuifeng@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/bpf/20220926184957.208194-3-kuifeng@fb.com |
||
|
Kui-Feng Lee
|
f0d74c4da1 |
bpf: Parameterize task iterators.
Allow creating an iterator that loops through resources of one thread/process. People could only create iterators to loop through all resources of files, vma, and tasks in the system, even though they were interested in only the resources of a specific task or process. Passing the additional parameters, people can now create an iterator to go through all resources or only the resources of a task. Signed-off-by: Kui-Feng Lee <kuifeng@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/bpf/20220926184957.208194-2-kuifeng@fb.com |
||
Dmitry Baryshkov
|
3137f2e600
|
firmware/psci: Add debugfs support to ease debugging
To ease debugging of PSCI supported features, add debugfs file called 'psci' describing PSCI and SMC CC versions, enabled features and options. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20220926110758.666922-1-dmitry.baryshkov@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Taehee Yoo
|
62e56ef57c |
net: tls: Add ARIA-GCM algorithm
RFC 6209 describes ARIA for TLS 1.2. ARIA-128-GCM and ARIA-256-GCM are defined in RFC 6209. This patch would offer performance increment and an opportunity for hardware offload. Benchmark results: iperf-ssl are used. CPU: intel i3-12100. TLS(openssl-3.0-dev) [ 3] 0.0- 1.0 sec 185 MBytes 1.55 Gbits/sec [ 3] 1.0- 2.0 sec 186 MBytes 1.56 Gbits/sec [ 3] 2.0- 3.0 sec 186 MBytes 1.56 Gbits/sec [ 3] 3.0- 4.0 sec 186 MBytes 1.56 Gbits/sec [ 3] 4.0- 5.0 sec 186 MBytes 1.56 Gbits/sec [ 3] 0.0- 5.0 sec 927 MBytes 1.56 Gbits/sec kTLS(aria-generic) [ 3] 0.0- 1.0 sec 198 MBytes 1.66 Gbits/sec [ 3] 1.0- 2.0 sec 194 MBytes 1.62 Gbits/sec [ 3] 2.0- 3.0 sec 194 MBytes 1.63 Gbits/sec [ 3] 3.0- 4.0 sec 194 MBytes 1.63 Gbits/sec [ 3] 4.0- 5.0 sec 194 MBytes 1.62 Gbits/sec [ 3] 0.0- 5.0 sec 974 MBytes 1.63 Gbits/sec kTLS(aria-avx wirh GFNI) [ 3] 0.0- 1.0 sec 632 MBytes 5.30 Gbits/sec [ 3] 1.0- 2.0 sec 657 MBytes 5.51 Gbits/sec [ 3] 2.0- 3.0 sec 657 MBytes 5.51 Gbits/sec [ 3] 3.0- 4.0 sec 656 MBytes 5.50 Gbits/sec [ 3] 4.0- 5.0 sec 656 MBytes 5.50 Gbits/sec [ 3] 0.0- 5.0 sec 3.18 GBytes 5.47 Gbits/sec Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Vadim Fedorenko <vfedorenko@novek.ru> Link: https://lore.kernel.org/r/20220925150033.24615-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Christophe JAILLET
|
73dfe93ea1 |
headers: Remove some left-over license text
Remove some left-over from commit
|
||
|
Christophe JAILLET
|
69ab6f5b00 |
ALSA: Remove some left-over license text in include/uapi/sound/
There is already a SPDX-License-Identifier tag, so the corresponding license text can be removed. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/203c1db92c470925f31e361f6e7d180812501f2e.1664112023.git.christophe.jaillet@wanadoo.fr Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
Jiri Olsa
|
0e253f7e55 |
bpf: Return value in kprobe get_func_ip only for entry address
Changing return value of kprobe's version of bpf_get_func_ip to return zero if the attach address is not on the function's entry point. For kprobes attached in the middle of the function we can't easily get to the function address especially now with the CONFIG_X86_KERNEL_IBT support. If user cares about current IP for kprobes attached within the function body, they can get it with PT_REGS_IP(ctx). Suggested-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Martynas Pumputis <m@lambda.lt> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220926153340.1621984-6-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Qu Wenruo
|
e71564c043 |
btrfs: introduce BTRFS_QGROUP_STATUS_FLAGS_MASK for later expansion
Currently we only have 3 qgroup flags: - BTRFS_QGROUP_STATUS_FLAG_ON - BTRFS_QGROUP_STATUS_FLAG_RESCAN - BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT These flags match the on-disk flags used in btrfs_qgroup_status. But we're going to introduce extra runtime flags which will not reach disks. So here we introduce a new mask, BTRFS_QGROUP_STATUS_FLAGS_MASK, to make sure only those flags can reach disks. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Qu Wenruo
|
1c56ab9919 |
btrfs: separate BLOCK_GROUP_TREE compat RO flag from EXTENT_TREE_V2
The problem of long mount time caused by block group item search is already known for some time, and the solution of block group tree has been proposed. There is really no need to bound this feature into extent tree v2, just introduce compat RO flag, BLOCK_GROUP_TREE, to correctly solve the problem. All the code handling block group root is already in the upstream kernel, thus this patch really only needs to introduce the new compat RO flag. This patch introduces one extra artificial limitation on block group tree feature, that free space cache v2 and no-holes feature must be enabled to use this new compat RO feature. This artificial requirement is mostly to reduce the test combinations, and can be a guideline for future features, to mostly rely on the latest default features. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
ZiyangZhang
|
c732a852b4 |
ublk_drv: add START_USER_RECOVERY and END_USER_RECOVERY support
START_USER_RECOVERY and END_USER_RECOVERY are two new control commands
to support user recovery feature.
After a crash, user should send START_USER_RECOVERY, it will:
(1) check if (a)current ublk_device is UBLK_S_DEV_QUIESCED which was
set by quiesce_work and (b)chardev is released
(2) reinit all ubqs, including:
(a) put the task_struct and reset ->ubq_daemon to NULL.
(b) reset all ublk_io.
(3) reset ub->mm to NULL.
Then, user should start a new process and send FETCH_REQ on each
ubq_daemon.
Finally, user should send END_USER_RECOVERY, it will:
(1) wait for all new ubq_daemons getting ready.
(2) update ublksrv_pid
(3) unquiesce the request queue and expect incoming ublk_queue_rq()
(4) convert ub's state to UBLK_S_DEV_LIVE
Note: we can handle STOP_DEV between START_USER_RECOVERY and
END_USER_RECOVERY. This is helpful to users who cannot start new process
after sending START_USER_RECOVERY ctrl-cmd.
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220923153919.44078-7-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
||
|
ZiyangZhang
|
a0d41dc113 |
ublk_drv: support UBLK_F_USER_RECOVERY_REISSUE
UBLK_F_USER_RECOVERY_REISSUE implies that:
With a dying ubq_daemon, ublk_drv let monitor_work requeues rq issued to
userspace(ublksrv) before the ubq_daemon is dying.
UBLK_F_USER_RECOVERY_REISSUE is designed for backends which:
(1) tolerate double-write since ublk_drv may issue the same rq
twice.
(2) does not let frontend users get I/O error, such as read-only FS
and VM backend.
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220923153919.44078-6-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
||
|
ZiyangZhang
|
77a440e2cb |
ublk_drv: define macros for recovery feature and check them
Define some macros for recovery feature.
UBLK_S_DEV_QUIESCED implies that ublk_device is quiesced
and is ready for recovery. This state can be observed by userspace.
UBLK_F_USER_RECOVERY implies that:
(1) ublk_drv enables recovery feature. It won't let monitor_work to
automatically abort rqs and release the device.
(2) With a dying ubq_daemon, ublk_drv ends(aborts) rqs issued to
userspace(ublksrv) before crash.
(3) With a dying ubq_daemon, in task work and ublk_queue_rq(),
ublk_drv requeues rqs.
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220923153919.44078-3-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
||
Patrick Rohr
|
195624d9c2 |
tun: support not enabling carrier in TUNSETIFF
This change adds support for not enabling carrier during TUNSETIFF interface creation by specifying the IFF_NO_CARRIER flag. Our tests make heavy use of tun interfaces. In some scenarios, the test process creates the interface but another process brings it up after the interface is discovered via netlink notification. In that case, it is not possible to create a tun/tap interface with carrier off without it racing against the bring up. Immediately setting carrier off via TUNSETCARRIER is still too late. Signed-off-by: Patrick Rohr <prohr@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Sean Anderson
|
0c3e10cb44 |
net: phy: Add support for rate matching
This adds support for rate matching (also known as rate adaptation) to the phy subsystem. The general idea is that the phy interface runs at one speed, and the MAC throttles the rate at which it sends packets to the link speed. There's a good overview of several techniques for achieving this at [1]. This patch adds support for three: pause-frame based (such as in Aquantia phys), CRS-based (such as in 10PASS-TS and 2BASE-TL), and open-loop-based (such as in 10GBASE-W). This patch makes a few assumptions and a few non assumptions about the types of rate matching available. First, it assumes that different phys may use different forms of rate matching. Second, it assumes that phys can use rate matching for any of their supported link speeds (e.g. if a phy supports 10BASE-T and XGMII, then it can adapt XGMII to 10BASE-T). Third, it does not assume that all interface modes will use the same form of rate matching. Fourth, it does not assume that all phy devices will support rate matching (even if some do). Relaxing or strengthening these (non-)assumptions could result in a different API. For example, if all interface modes were assumed to use the same form of rate matching, then a bitmask of interface modes supportting rate matching would suffice. For some better visibility into the process, the current rate matching mode is exposed as part of the ethtool ksettings. For the moment, only read access is supported. I'm not sure what userspace might want to configure yet (disable it altogether, disable just one mode, specify the mode to use, etc.). For the moment, since only pause-based rate adaptation support is added in the next few commits, rate matching can be disabled altogether by adjusting the advertisement. 802.3 calls this feature "rate adaptation" in clause 49 (10GBASE-R) and "rate matching" in clause 61 (10PASS-TL and 2BASE-TS). Aquantia also calls this feature "rate adaptation". I chose "rate matching" because it is shorter, and because Russell doesn't think "adaptation" is correct in this context. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
David Vernet
|
2057156738 |
bpf: Add bpf_user_ringbuf_drain() helper
In a prior change, we added a new BPF_MAP_TYPE_USER_RINGBUF map type which
will allow user-space applications to publish messages to a ring buffer
that is consumed by a BPF program in kernel-space. In order for this
map-type to be useful, it will require a BPF helper function that BPF
programs can invoke to drain samples from the ring buffer, and invoke
callbacks on those samples. This change adds that capability via a new BPF
helper function:
bpf_user_ringbuf_drain(struct bpf_map *map, void *callback_fn, void *ctx,
u64 flags)
BPF programs may invoke this function to run callback_fn() on a series of
samples in the ring buffer. callback_fn() has the following signature:
long callback_fn(struct bpf_dynptr *dynptr, void *context);
Samples are provided to the callback in the form of struct bpf_dynptr *'s,
which the program can read using BPF helper functions for querying
struct bpf_dynptr's.
In order to support bpf_ringbuf_drain(), a new PTR_TO_DYNPTR register
type is added to the verifier to reflect a dynptr that was allocated by
a helper function and passed to a BPF program. Unlike PTR_TO_STACK
dynptrs which are allocated on the stack by a BPF program, PTR_TO_DYNPTR
dynptrs need not use reference tracking, as the BPF helper is trusted to
properly free the dynptr before returning. The verifier currently only
supports PTR_TO_DYNPTR registers that are also DYNPTR_TYPE_LOCAL.
Note that while the corresponding user-space libbpf logic will be added
in a subsequent patch, this patch does contain an implementation of the
.map_poll() callback for BPF_MAP_TYPE_USER_RINGBUF maps. This
.map_poll() callback guarantees that an epoll-waiting user-space
producer will receive at least one event notification whenever at least
one sample is drained in an invocation of bpf_user_ringbuf_drain(),
provided that the function is not invoked with the BPF_RB_NO_WAKEUP
flag. If the BPF_RB_FORCE_WAKEUP flag is provided, a wakeup
notification is sent even if no sample was drained.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220920000100.477320-3-void@manifault.com
|
||
|
David Vernet
|
583c1f4201 |
bpf: Define new BPF_MAP_TYPE_USER_RINGBUF map type
We want to support a ringbuf map type where samples are published from user-space, to be consumed by BPF programs. BPF currently supports a kernel -> user-space circular ring buffer via the BPF_MAP_TYPE_RINGBUF map type. We'll need to define a new map type for user-space -> kernel, as none of the helpers exported for BPF_MAP_TYPE_RINGBUF will apply to a user-space producer ring buffer, and we'll want to add one or more helper functions that would not apply for a kernel-producer ring buffer. This patch therefore adds a new BPF_MAP_TYPE_USER_RINGBUF map type definition. The map type is useless in its current form, as there is no way to access or use it for anything until we one or more BPF helpers. A follow-on patch will therefore add a new helper function that allows BPF programs to run callbacks on samples that are published to the ring buffer. Signed-off-by: David Vernet <void@manifault.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220920000100.477320-2-void@manifault.com |
||
Pavel Begunkov
|
493108d95f |
io_uring/net: zerocopy sendmsg
Add a zerocopy version of sendmsg. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/6aabc4bdfc0ec78df6ec9328137e394af9d4e7ef.1663668091.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Pu Lehui
|
0e426a3ae0 |
bpf, cgroup: Reject prog_attach_flags array when effective query
Attach flags is only valid for attached progs of this layer cgroup,
but not for effective progs. For querying with EFFECTIVE flags,
exporting attach flags does not make sense. So when effective query,
we reject prog_attach_flags array and don't need to populate it.
Also we limit attach_flags to output 0 during effective query.
Fixes:
|
||
Dylan Yudaken
|
c0e0d6ba25 |
io_uring: add IORING_SETUP_DEFER_TASKRUN
Allow deferring async tasks until the user calls io_uring_enter(2) with the IORING_ENTER_GETEVENTS flag. Enable this mode with a flag at io_uring_setup time. This functionality requires that the later io_uring_enter will be called from the same submission task, and therefore restrict this flag to work only when IORING_SETUP_SINGLE_ISSUER is also set. Being able to hand pick when tasks are run prevents the problem where there is current work to be done, however task work runs anyway. For example, a common workload would obtain a batch of CQEs, and process each one. Interrupting this to additional taskwork would add latency but not gain anything. If instead task work is deferred to just before more CQEs are obtained then no additional latency is added. The way this is implemented is by trying to keep task work local to a io_ring_ctx, rather than to the submission task. This is required, as the application will want to wake up only a single io_ring_ctx at a time to process work, and so the lists of work have to be kept separate. This has some other benefits like not having to check the task continually in handle_tw_list (and potentially unlocking/locking those), and reducing locks in the submit & process completions path. There are networking cases where using this option can reduce request latency by 50%. For example a contrived example using [1] where the client sends 2k data and receives the same data back while doing some system calls (to trigger task work) shows this reduction. The reason ends up being that if sending responses is delayed by processing task work, then the client side sits idle. Whereas reordering the sends first means that the client runs it's workload in parallel with the local task work. [1]: Using https://github.com/DylanZA/netbench/tree/defer_run Client: ./netbench --client_only 1 --control_port 10000 --host <host> --tx "epoll --threads 16 --per_thread 1 --size 2048 --resp 2048 --workload 1000" Server: ./netbench --server_only 1 --control_port 10000 --rx "io_uring --defer_taskrun 0 --workload 100" --rx "io_uring --defer_taskrun 1 --workload 100" Signed-off-by: Dylan Yudaken <dylany@fb.com> Link: https://lore.kernel.org/r/20220830125013.570060-5-dylany@fb.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Christophe JAILLET
|
7b5541a932 |
headers: Remove some left-over license text in include/uapi/linux/netfilter/
When the SPDX-License-Identifier tag has been added, the corresponding license text has not been removed. Remove it now. Also, in xt_connmark.h, move the copyright text at the top of the file which is a much more common pattern. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Florian Westphal <fw@strlen.de> |
||
Michał Kępień
|
095bb6e44e |
mtdchar: add MEMREAD ioctl
User-space applications making use of MTD devices via /dev/mtd*
character devices currently have limited capabilities for reading data:
- only deprecated methods of accessing OOB layout information exist,
- there is no way to explicitly specify MTD operation mode to use; it
is auto-selected based on the MTD file mode (MTD_FILE_MODE_*) set
for the character device; in particular, this prevents using
MTD_OPS_AUTO_OOB for reads,
- all existing user-space interfaces which cause mtd_read() or
mtd_read_oob() to be called (via mtdchar_read() and
mtdchar_read_oob(), respectively) return success even when those
functions return -EUCLEAN or -EBADMSG; this renders user-space
applications using these interfaces unaware of any corrected
bitflips or uncorrectable ECC errors detected during reads.
Note that the existing MEMWRITE ioctl allows the MTD operation mode to
be explicitly set, allowing user-space applications to write page data
and OOB data without requiring them to know anything about the OOB
layout of the MTD device they are writing to (MTD_OPS_AUTO_OOB). Also,
the MEMWRITE ioctl does not mangle the return value of mtd_write_oob().
Add a new ioctl, MEMREAD, which addresses the above issues. It is
intended to be a read-side counterpart of the existing MEMWRITE ioctl.
Similarly to the latter, the read operation is performed in a loop which
processes at most mtd->erasesize bytes in each iteration. This is done
to prevent unbounded memory allocations caused by calling kmalloc() with
the 'size' argument taken directly from the struct mtd_read_req provided
by user space. However, the new ioctl is implemented so that the values
it returns match those that would have been returned if just a single
mtd_read_oob() call was issued to handle the entire read operation in
one go.
Note that while just returning -EUCLEAN or -EBADMSG to user space would
already be a valid and useful indication of the ECC algorithm detecting
errors during a read operation, that signal would not be granular enough
to cover all use cases. For example, knowing the maximum number of
bitflips detected in a single ECC step during a read operation performed
on a given page may be useful when dealing with an MTD partition whose
ECC layout varies across pages (e.g. a partition consisting of a
bootloader area using a "custom" ECC layout followed by data pages using
a "standard" ECC layout). To address that, include ECC statistics in
the structure returned to user space by the new MEMREAD ioctl.
Link: https://www.infradead.org/pipermail/linux-mtd/2016-April/067085.html
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220629125737.14418-5-kernel@kempniu.pl
|
||
|
Benjamin Tissoires
|
735e1bb1b8 |
HID: convert defines of HID class requests into a proper enum
This allows to export the type in BTF and so in the automatically generated vmlinux.h. It will also add some static checks on the users when we change the ll driver API (see not below). Note that we need to also do change in the ll_driver API, but given that this will have a wider impact outside of this tree, we leave this as a TODO for the future. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20220902132938.2409206-11-benjamin.tissoires@redhat.com |
||
|
Benjamin Tissoires
|
ead77b65ae |
HID: export hid_report_type to uapi
When we are dealing with eBPF, we need to have access to the report type. Currently our implementation differs from the USB standard, making it impossible for users to know the exact value besides hardcoding it themselves. And instead of a blank define, convert it as an enum. Note that we need to also do change in the ll_driver API, but given that this will have a wider impact outside of this tree, we leave this as a TODO for the future. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20220902132938.2409206-10-benjamin.tissoires@redhat.com |