sysfs_assoc_lock is an odd piece of locking. In general, whoever owns
a kobject is responsible for synchronizing sysfs operations and sysfs
proper assumes that, for example, removal won't race with any other
operation; however, this doesn't work for symlinking because an entity
performing symlink doesn't usually own the target kobject and thus has
no control over its removal.
sysfs_assoc_lock synchronizes symlink operations against kobj->sd
disassociation so that symlink code doesn't end up dereferencing
already freed sysfs_dirent by racing with removal of the target
kobject.
This is quite obscure and the generic name of the lock and lack of
comments make it difficult to understand its role. Let's rename it to
sysfs_symlink_target_lock and add comments explaining what's going on.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
13c589d5b0 ("sysfs: use seq_file when reading regular files")
converted regular sysfs files to use seq_file. The commit substituted
generic_file_llseek() with seq_lseek() for llseek implementation.
Before the change, all regular sysfs files were allowed to seek to any
position in [0, PAGE_SIZE] as the file size is always PAGE_SIZE and
generic_file_llseek() allows any seeking inside the range under file
size; however, seq_lseek()'s behavior is different. It traverses the
output by repeatedly invoking ->show() until it reaches the target
offset or traversal indicates EOF. As seq_files are fully dynamic and
may not end at all, it doesn't support seeking from the end
(SEEK_END).
Apparently, there are userland tools which uses SEEK_END to discover
the buffer size to use and the switch to seq_lseek() disturbs them as
SEEK_END fails with -EINVAL.
The only benefits of using seq_lseek() instead of
generic_file_llseek() are
* Early failure. If traversing to certain file position should fail,
seq_lseek() will report such failures on lseek(2) instead of the
following read/write operations.
* EOF detection. While SEEK_END is not supported, SEEK_SET/CUR +
large offset can be used to detect eof - eof at the time of the seek
anyway as the file size may change dynamically.
Both aren't necessary for sysfs or prospect kernfs users. Revert to
genefic_file_llseek() and preserve the original behavior.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Link: https://lkml.kernel.org/r/20131031114358.GA5551@osiris
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both POSIX.1-2008 and Linux Programmer's Manual have a dedicated return
error code for a case, when a file doesn't support mmap(), it's ENODEV.
This change replaces overloaded EINVAL with ENODEV in a situation
described above for sysfs binary files.
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Separate out sysfs_warn_dup() out of sysfs_add_one(). This will help
separating out the core sysfs functionalities into kernfs so that it
can be used by non-sysfs users too.
This doesn't make any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Most removal related logic is implemented in fs/sysfs/dir.c. Move
sysfs_hash_and_remove() to fs/sysfs/dir.c so that __sysfs_remove()
doesn't have to be public.
This is pure relocation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs_get_dentry() has been gone for years now. Remove the left-over
prototype.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ignore_lockdep is currently honored only for regular files. There's
no reason to ignore it for bin files. Update sysfs_ignore_lockdep()
so that bin_attr.attr.ignore_lockdep works too.
While this doesn't have any in-kernel user, this unifies the behaviors
between regular and bin files and will help later changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3124eb1679 ("sysfs: merge regular and bin file handling") folded bin
file handling into regular file handling. Among other things, bin
file now shares the same open path including sysfs_open_dirent
association using sysfs_dirent->s_attr.open. This is buggy because
->s_bin_attr lives in the same union and doesn't have the field. This
bug doesn't trigger because sysfs_elem_bin_attr doesn't have an active
field at the conflicting position. It does have a field "buffers" but
it isn't used anymore.
This patch collapses sysfs_elem_bin_attr into sysfs_elem_attr so that
the bin_attr is accessed through ->s_attr.bin_attr which lives with
->s_attr.attr in an anonymous union. The code paths already assume
bin_attr contains attr as the first element, so this doesn't add any
more assumptions while making it explicit that the two types are
handled together.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before patch(sysfs: prepare path write for unified regular / bin
file handling), when size of bin file is zero, writting still can
continue, but this patch changes the behaviour.
The worse thing is that firmware loader is broken by this patch,
and user space application can't write to firmware bin file any more
because both firmware loader and drivers can't know at advance how
large the firmware file is and have to set its initialized size as
zero.
This patch fixes the problem and keeps behaviour of writting to bin
as before.
Reported-by: Lothar Waßmann <LW@karo-electronics.de>
Tested-by: Lothar Waßmann <LW@karo-electronics.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While looking at the code, I noticed that bin_attribute read() and write()
ops copy the inode size into an int for futher comparisons.
Some bin_attributes can be fairly large. For example, pci creates some for
BARs set to the BAR size and giant BARs are around the corner, so this is
going to break something somewhere eventually.
Let's use the right type.
[adjust for seqfile conversions, only needed for bin_read() - gkh]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
375b611e60 ("sysfs: remove sysfs_buffer->ops") introduced
sysfs_file_ops() which determines the associated file operation of a
given sysfs_dirent. As file ops access should be protected by an
active reference, the new function includes a lockdep assertion on the
sysfs_dirent; unfortunately, I forgot to take attr->ignore_lockdep
flag into account and the lockdep assertion trips spuriously for files
which opt out from active reference lockdep checking.
# cat /sys/devices/pci0000:00/0000:00:01.2/usb1/authorized
------------[ cut here ]------------
WARNING: CPU: 1 PID: 540 at /work/os/work/fs/sysfs/file.c:79 sysfs_file_ops+0x4e/0x60()
Modules linked in:
CPU: 1 PID: 540 Comm: cat Not tainted 3.11.0-work+ #3
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
0000000000000009 ffff880016205c08 ffffffff81ca0131 0000000000000000
ffff880016205c40 ffffffff81096d0d ffff8800166cb898 ffff8800166f6f60
ffffffff8125a220 ffff880011ab1ec0 ffff88000aff0c78 ffff880016205c50
Call Trace:
[<ffffffff81ca0131>] dump_stack+0x4e/0x82
[<ffffffff81096d0d>] warn_slowpath_common+0x7d/0xa0
[<ffffffff81096dea>] warn_slowpath_null+0x1a/0x20
[<ffffffff8125994e>] sysfs_file_ops+0x4e/0x60
[<ffffffff8125a274>] sysfs_open_file+0x54/0x300
[<ffffffff811df612>] do_dentry_open.isra.17+0x182/0x280
[<ffffffff811df820>] finish_open+0x30/0x40
[<ffffffff811f0623>] do_last+0x503/0xd90
[<ffffffff811f0f6b>] path_openat+0xbb/0x6d0
[<ffffffff811f23ba>] do_filp_open+0x3a/0x90
[<ffffffff811e09a9>] do_sys_open+0x129/0x220
[<ffffffff811e0abe>] SyS_open+0x1e/0x20
[<ffffffff81caf3c2>] system_call_fastpath+0x16/0x1b
---[ end trace aa48096b111dafdb ]---
Rename fs/sysfs/dir.c::ignore_lockdep() to sysfs_ignore_lockdep() and
move it to fs/sysfs/sysfs.h and make sysfs_file_ops() skip lockdep
assertion if sysfs_ignore_lockdep() is true.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the previous changes, sysfs regular file code is ready to handle
bin files too. This patch makes bin files share the regular file
path.
* sysfs_create/remove_bin_file() are moved to fs/sysfs/file.c.
* sysfs_init_inode() is updated to use the new sysfs_bin_operations
instead of bin_fops for bin files.
* fs/sysfs/bin.c and the related pieces are removed.
This patch shouldn't introduce any behavior difference to bin file
accesses.
Overall, this unification reduces the amount of duplicate logic, makes
behaviors more consistent and paves the road for building simpler and
more versatile interface which will allow other subsystems to make use
of sysfs for their pseudo filesystems.
v2: Stale fs/sysfs/bin.c reference dropped from
Documentation/DocBook/filesystems.tmpl. Reported by kbuild test
robot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kay Sievers <kay@vrfy.org>
Cc: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs bin file handling will be merged into the regular file support.
This patch prepares the open path.
This patch updates sysfs_open_file() such that it can handle both
regular and bin files.
This is a preparation and the new bin file path isn't used yet.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs bin file handling will be merged into the regular file support.
This patch copies mmap support from bin so that fs/sysfs/file.c can
handle mmapping bin files.
The code is copied mostly verbatim with the following updates.
* ->mmapped and ->vm_ops are added to sysfs_open_file and bin_buffer
references are replaced with sysfs_open_file ones.
* Symbols are prefixed with sysfs_.
* sysfs_unmap_bin_file() grabs sysfs_open_dirent and traverses
->files. Invocation of this function is added to
sysfs_addrm_finish().
* sysfs_bin_mmap() is added to sysfs_bin_operations.
This is a preparation and the new mmap path isn't used yet.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs bin file handling will be merged into the regular file support.
This patch prepares the read path.
Copy fs/sysfs/bin.c::read() to fs/sysfs/file.c and make it use
sysfs_open_file instead of bin_buffer. The function is identical copy
except for the use of sysfs_open_file.
The new function is added to sysfs_bin_operations. This isn't used
yet but will eventually replace fs/sysfs/bin.c.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs bin file handling will be merged into the regular file support.
This patch prepares the write path.
bin file write is almost identical to regular file write except that
the write length is capped by the inode size and @off is passed to the
write method. This patch adds bin file handling to sysfs_write_file()
so that it can handle both regular and bin files.
A new file_operations struct sysfs_bin_operations is added, which
currently only hosts sysfs_write_file() and generic_file_llseek().
This isn't used yet but will eventually replace fs/sysfs/bin.c.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
read() is simple enough and fill_read() being in a separate function
doesn't add anything. Let's collapse it into read(). This will make
merging bin file handling with regular file.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After b31ca3f5df ("sysfs: fix deadlock"), bin read() first writes
data to bb->buffer and bounces it to a transient kernel buffer which
is then copied out to userland. The double bouncing doesn't add
anything. Let's just use the transient buffer directly.
While at it, rename @temp to @buf for clarity.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs read path implements its own buffering scheme between userland
and kernel callbacks, which essentially is a degenerate duplicate of
seq_file. This patch replaces the custom read buffering
implementation in sysfs with seq_file.
While the amount of code reduction is small, this reduces low level
hairiness and enables future development of a new versatile API based
on seq_file so that sysfs features can be shared with other
subsystems.
As write path was already converted to not use sysfs_open_file->page,
this patch makes ->page and ->count unused and removes them.
Userland behavior remains the same except for some extreme corner
cases - e.g. sysfs will now regenerate the content each time a file is
read after a non-contiguous seek whereas the original code would keep
using the same content. While this is a userland visible behavior
change, it is extremely unlikely to be noticeable and brings sysfs
behavior closer to that of procfs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There isn't much to be gained by keeping around kernel buffer while a
file is open especially as the read path planned to be converted to
use seq_file and won't use the buffer. This patch makes
sysfs_write_file() use per-write transient buffer instead of
sysfs_open_file->page.
This simplifies the write path, enables removing sysfs_open_file->page
once read path is updated and will help merging bin file write path
which already requires the use of a transient buffer due to a locking
order issue.
As the function comments of flush_write_buffer() and
sysfs_write_buffer() are being updated anyway, reformat them so that
they're more conventional.
v2: Use min_t() instead of min() in sysfs_write_file() to avoid build
warning on arm. Reported by build test robot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs will be converted to use seq_file for read path, which will make
it difficult to pass around multiple pointers directly. This patch
adds sysfs_open_file->sd and ->file so that we can reach all the
necessary data structures from sysfs_open_file.
flush_write_buffer() is updated to drop @dentry which was used to
discover the sysfs_dirent as it's now available through
sysfs_open_file->sd.
This patch doesn't cause any behavior difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs read path will be converted to use seq_file which will handle
buffering making sysfs_buffer a misnomer. Rename sysfs_buffer to
sysfs_open_file, and sysfs_open_dirent->buffers to ->files.
This path is pure rename.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a separate mutex to protect sysfs_open_dirent->buffers list. This
will allow performing sleepable operations while traversing
sysfs_buffers, which will be renamed to sysfs_open_file.
Note that currently sysfs_open_dirent->buffers list isn't being used
for anything and this patch doesn't make any functional difference.
It will be used to merge regular and bin file supports.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, sysfs_ops is fetched during sysfs_open_file() and cached in
sysfs_buffer->ops to be used while the file is open. This patch
removes the caching and makes each operation directly fetch sysfs_ops.
This patch doesn't introduce any behavior difference and is to prepare
for merging regular and bin file supports.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
->needs_read_fill is used to implement the following behaviors.
1. Ensure buffer filling on the first read.
2. Force buffer filling after a write.
3. Force buffer filling after a successful poll.
However, #2 and #3 don't really work as sysfs doesn't reset file
position. While the read buffer would be refilled, the next read
would continue from the position after the last read or write,
requiring an explicit seek to the start for it to be useful, which
makes ->needs_read_fill superflous as read buffer is always refilled
if f_pos == 0.
Update sysfs_read_file() to test buffer->page for #1 instead and
remove ->needs_read_fill. While this changes behavior in extreme
corner cases - e.g. re-reading a sysfs file after seeking to non-zero
position after a write or poll, it's highly unlikely to lead to actual
breakage. This change is to prepare for using seq_file in the read
path.
While at it, reformat a comment in fill_write_buffer().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Given a sysfs_dirent, there is no reason to have multiple versions of
removal functions. A function which removes the specified
sysfs_dirent and its descendants is enough.
This patch intorduces [__}sysfs_remove() which replaces all internal
variations of removal functions. This will be the only removal
function in the planned new sysfs_dirent based interface.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, sysfs directory removal is inconsistent in that it would
remove any files directly under it but wouldn't recurse into
directories. Thanks to group subdirectories, this doesn't even match
with kobject boundaries. sysfs is in the process of being separated
out so that it can be used by multiple subsystems and we want to have
a consistent behavior - either removal of a sysfs_dirent should remove
every descendant entries or none instead of something inbetween.
This patch implements proper recursive removal in
__sysfs_remove_dir(). The function now walks its subtree in a
post-order walk to remove all descendants.
This is a behavior change but kobject / driver layer, which currently
is the only consumer, has already been updated to handle duplicate
removal attempts, so nothing should be broken after this change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs currently has a rather weird behavior regarding removals. A
directory removal would delete all files directly under it but
wouldn't recurse into subdirectories, which, while a bit inconsistent,
seems to make sense at the first glance as each directory is
supposedly associated with a kobject and each kobject can take care of
the directory deletion; however, this doesn't really hold as we have
groups which can be directories without a kobject associated with it
and require explicit deletions.
We're in the process of separating out sysfs from kboject / driver
core and want a consistent behavior. A removal should delete either
only the specified node or everything under it. I think it is helpful
to support recursive atomic removal and later patches will implement
it.
Such change means that a sysfs_dirent associated with kobject may be
deleted before the kobject itself is removed if one of its ancestor
gets removed before it. As sysfs_remove_dir() puts the base ref, we
may end up with dangling pointer on descendants. This can be solved
by holding an extra reference on the sd from kobject.
Acquire an extra reference on the associated sysfs_dirent on directory
creation and put it after removal.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs_addrm_start/finish() enclose sysfs_dirent additions and
deletions and sysfs_addrm_cxt is used to record information necessary
to finish the operations. Currently, sysfs_addrm_start() takes
@parent_sd, records it in sysfs_addrm_cxt, and assumes that all
operations in the block are performed under that @parent_sd.
This assumption has been fine until now but we want to make some
operations behave recursively and, while having @parent_sd recorded in
sysfs_addrm_cxt doesn't necessarily prevents that, it becomes
confusing.
This patch removes sysfs_addrm_cxt->parent_sd and makes
sysfs_add_one() take an explicit @parent_sd parameter. Note that
sysfs_remove_one() doesn't need the extra argument as its parent is
always known from the target @sd.
While at it, add __acquires/releases() notations to
sysfs_addrm_start/finish() respectively.
This patch doesn't make any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some internal sysfs functions which take explicit namespace argument
are weird in that they place the optional @ns in front of @name which
is contrary to the established convention. This is confusing and
error-prone especially as @ns and @name may be interchanged without
causing compilation warning.
Swap the positions of @name and @ns in the following internal
functions.
sysfs_find_dirent()
sysfs_rename()
sysfs_hash_and_remove()
sysfs_name_hash()
sysfs_name_compare()
create_dir()
This patch doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pre-existing sysfs interfaces which take explicit namespace
argument are weird in that they place the optional @ns in front of
@name which is contrary to the established convention. For example,
we end up forcing vast majority of sysfs_get_dirent() users to do
sysfs_get_dirent(parent, NULL, name), which is silly and error-prone
especially as @ns and @name may be interchanged without causing
compilation warning.
This renames sysfs_get_dirent() to sysfs_get_dirent_ns() and swap the
positions of @name and @ns, and sysfs_get_dirent() is now a wrapper
around sysfs_get_dirent_ns(). This makes confusions a lot less
likely.
There are other interfaces which take @ns before @name. They'll be
updated by following patches.
This patch doesn't introduce any functional changes.
v2: EXPORT_SYMBOL_GPL() wasn't updated leading to undefined symbol
error on module builds. Reported by build test robot. Fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The way namespace tags are implemented in sysfs is more complicated
than necessary. As each tag is a pointer value and required to be
non-NULL under a namespace enabled parent, there's no need to record
separately what type each tag is or where namespace is enabled.
If multiple namespace types are needed, which currently aren't, we can
simply compare the tag to a set of allowed tags in the superblock
assuming that the tags, being pointers, won't have the same value
across multiple types. Also, whether to filter by namespace tag or
not can be trivially determined by whether the node has any tagged
children or not.
This patch rips out kobj_ns_type handling from sysfs. sysfs no longer
cares whether specific type of namespace is enabled or not. If a
sysfs_dirent has a non-NULL tag, the parent is marked as needing
namespace filtering and the value is tested against the allowed set of
tags for the superblock (currently only one but increasing this number
isn't difficult) and the sysfs_dirent is ignored if it doesn't match.
This removes most kobject namespace knowledge from sysfs proper which
will enable proper separation and layering of sysfs. The namespace
sanity checks in fs/sysfs/dir.c are replaced by the new sanity check
in kobject_namespace(). As this is the only place ktype->namespace()
is called for sysfs, this doesn't weaken the sanity check
significantly. I omitted converting the sanity check in
sysfs_do_create_link_sd(). While the check can be shifted to upper
layer, mistakes there are well contained and should be easily visible
anyway.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's no reason for sysfs to be calling ktype->namespace(). It is
backwards, obfuscates what's going on and unnecessarily tangles two
separate layers.
There are two places where symlink code calls ktype->namespace().
* sysfs_do_create_link_sd() calls it to find out the namespace tag of
the target directory. Unless symlinking races with cross-namespace
renaming, this equals @target_sd->s_ns.
* sysfs_rename_link() uses it to find out the new namespace to rename
to and the new namespace can be different from the existing one.
The function is renamed to sysfs_rename_link_ns() with an explicit
@ns argument and the ktype->namespace() invocation is shifted to the
device layer.
While this patch replaces ktype->namespace() invocation with the
recorded result in @target_sd, this shouldn't result in any behvior
difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For some unrecognizable reason, namespace information is communicated
to sysfs through ktype->namespace() callback when there's *nothing*
which needs the use of a callback. The whole sequence of operations
is completely synchronous and sysfs operations simply end up calling
back into the layer which just invoked it in order to find out the
namespace information, which is completely backwards, obfuscates
what's going on and unnecessarily tangles two separate layers.
This patch doesn't remove ktype->namespace() but shifts its handling
to kobject layer. We probably want to get rid of the callback in the
long term.
This patch adds an explicit param to sysfs_{create|rename|move}_dir()
and renames them to sysfs_{create|rename|move}_dir_ns(), respectively.
ktype->namespace() invocations are moved to the calling sites of the
above functions. A new helper kboject_namespace() is introduced which
directly tests kobj_ns_type_operations->type which should give the
same result as testing sysfs_fs_type(parent_sd) and returns @kobj's
namespace tag as necessary. kobject_namespace() is extern as it will
be used from another file in the following patches.
This patch should be an equivalent conversion without any functional
difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs ns (namespace) implementation became more convoluted than
necessary while trying to hide ns information from visible interface.
The relatively recent attr ns support is a good example.
* attr ns tag is determined by sysfs_ops->namespace() callback while
dir tag is determined by kobj_type->namespace(). The placement is
arbitrary.
* Instead of performing operations with explicit ns tag, the namespace
callback is routed through sysfs_attr_ns(), sysfs_ops->namespace(),
class_attr_namespace(), class_attr->namespace(). It's not simpler
in any sense. The only thing this convolution does is traversing
the whole stack backwards.
The namespace callbacks are unncessary because the operations involved
are inherently synchronous. The information can be provided in in
straight-forward top-down direction and reversing that direction is
unnecessary and against basic design principles.
This backward interface is unnecessarily convoluted and hinders
properly separating out sysfs from driver model / kobject for proper
layering. This patch updates attr ns support such that
* sysfs_ops->namespace() and class_attr->namespace() are dropped.
* sysfs_{create|remove}_file_ns(), which take explicit @ns param, are
added and sysfs_{create|remove}_file() are now simple wrappers
around the ns aware functions.
* ns handling is dropped from sysfs_chmod_file(). Nobody uses it at
this point. sysfs_chmod_file_ns() can be added later if necessary.
* Explicit @ns is propagated through class_{create|remove}_file_ns()
and netdev_class_{create|remove}_file_ns().
* driver/net/bonding which is currently the only user of attr
namespace is updated to use netdev_class_{create|remove}_file_ns()
with @bh->net as the ns tag instead of using the namespace callback.
This patch should be an equivalent conversion without any functional
difference. It makes the code easier to follow, reduces lines of code
a bit and helps proper separation and layering.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The expansion of to_sysfs_dirent() contains an unncessary trailing
semicolon making it impossible to use in the middle of statements.
Drop it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull vfs pile 2 (of many) from Al Viro:
"Mostly Miklos' series this time"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
constify dcache.c inlined helpers where possible
fuse: drop dentry on failed revalidate
fuse: clean up return in fuse_dentry_revalidate()
fuse: use d_materialise_unique()
sysfs: use check_submounts_and_drop()
nfs: use check_submounts_and_drop()
gfs2: use check_submounts_and_drop()
afs: use check_submounts_and_drop()
vfs: check unlinked ancestors before mount
vfs: check submounts and drop atomically
vfs: add d_walk()
vfs: restructure d_genocide()
Pull namespace changes from Eric Biederman:
"This is an assorted mishmash of small cleanups, enhancements and bug
fixes.
The major theme is user namespace mount restrictions. nsown_capable
is killed as it encourages not thinking about details that need to be
considered. A very hard to hit pid namespace exiting bug was finally
tracked and fixed. A couple of cleanups to the basic namespace
infrastructure.
Finally there is an enhancement that makes per user namespace
capabilities usable as capabilities, and an enhancement that allows
the per userns root to nice other processes in the user namespace"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
userns: Kill nsown_capable it makes the wrong thing easy
capabilities: allow nice if we are privileged
pidns: Don't have unshare(CLONE_NEWPID) imply CLONE_THREAD
userns: Allow PR_CAPBSET_DROP in a user namespace.
namespaces: Simplify copy_namespaces so it is clear what is going on.
pidns: Fix hang in zap_pid_ns_processes by sending a potentially extra wakeup
sysfs: Restrict mounting sysfs
userns: Better restrictions on when proc and sysfs can be mounted
vfs: Don't copy mount bind mounts of /proc/<pid>/ns/mnt between namespaces
kernel/nsproxy.c: Improving a snippet of code.
proc: Restrict mounting the proc filesystem
vfs: Lock in place mounts from more privileged users
Do have_submounts(), shrink_dcache_parent() and d_drop() atomically.
check_submounts_and_drop() can deal with negative dentries and
non-directories as well.
Non-directories can also be mounted on. And just like directories we don't
want these to disappear with invalidation.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Don't allow mounting sysfs unless the caller has CAP_SYS_ADMIN rights
over the net namespace. The principle here is if you create or have
capabilities over it you can mount it, otherwise you get to live with
what other people have mounted.
Instead of testing this with a straight forward ns_capable call,
perform this check the long and torturous way with kobject helpers,
this keeps direct knowledge of namespaces out of sysfs, and preserves
the existing sysfs abstractions.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Rely on the fact that another flavor of the filesystem is already
mounted and do not rely on state in the user namespace.
Verify that the mounted filesystem is not covered in any significant
way. I would love to verify that the previously mounted filesystem
has no mounts on top but there are at least the directories
/proc/sys/fs/binfmt_misc and /sys/fs/cgroup/ that exist explicitly
for other filesystems to mount on top of.
Refactor the test into a function named fs_fully_visible and call that
function from the mount routines of proc and sysfs. This makes this
test local to the filesystems involved and the results current of when
the mounts take place, removing a weird threading of the user
namespace, the mount namespace and the filesystems themselves.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Fix up the wording of sysfs_create/remove_groups() a bit.
Reported-by: Anthony Foiani <tkil@scrye.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes the coding style warnings in fs/sysfs/file.c for broken
strings across lines.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The export should happen after the function, not at the bottom of the
file, so fix that up.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs_remove_group() never had kerneldoc, so add it, and fix up the
kerneldoc for sysfs_remove_groups() which didn't specify the parameters
properly.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
checkpatch complains about the broken string in the file, and it's
correct, so fix it up.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes up the coding style issue of incorrectly placing the
EXPORT_SYMBOL_GPL() macro, it should be right after the function itself,
not at the end of the file.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These functions are being open-coded in 3 different places in the driver
core, and other driver subsystems will want to start doing this as well,
so move it to the sysfs core to keep it all in one place, where we know
it is written properly.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When only using bin_attrs instead of attrs the kernel prints a warning
and refuses to create the sysfs entry. This fixes that.
Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
groups should be able to support binary attributes, just like it
supports "normal" attributes. This lets us only handle one type of
structure, groups, throughout the driver core and subsystems, making
binary attributes a "full fledged" part of the driver model, and not
something just "tacked on".
Reported-by: Oliver Schinagl <oliver@schinagl.nl>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here's the big driver core merge for 3.11-rc1
Lots of little things, and larger firmware subsystem updates, all
described in the shortlog. Nice thing here is that we finally get rid
of CONFIG_HOTPLUG, after 10+ years, thanks to Stephen Rohtwell (it had
been always on for a number of kernel releases, now it's just removed.)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlHRsGMACgkQMUfUDdst+ylIIACfW8lLxOPVK+iYG699TWEBAkp0
LFEAnjlpAMJ1JnoZCuWDZObNCev93zGB
=020+
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here's the big driver core merge for 3.11-rc1
Lots of little things, and larger firmware subsystem updates, all
described in the shortlog. Nice thing here is that we finally get rid
of CONFIG_HOTPLUG, after 10+ years, thanks to Stephen Rohtwell (it had
been always on for a number of kernel releases, now it's just
removed)"
* tag 'driver-core-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits)
driver core: device.h: fix doc compilation warnings
firmware loader: fix another compile warning with PM_SLEEP unset
build some drivers only when compile-testing
firmware loader: fix compile warning with PM_SLEEP set
kobject: sanitize argument for format string
sysfs_notify is only possible on file attributes
firmware loader: simplify holding module for request_firmware
firmware loader: don't export cache_firmware and uncache_firmware
drivers/base: Use attribute groups to create sysfs memory files
firmware loader: fix compile warning
firmware loader: fix build failure with !CONFIG_FW_LOADER_USER_HELPER
Documentation: Updated broken link in HOWTO
Finally eradicate CONFIG_HOTPLUG
driver core: firmware loader: kill FW_ACTION_NOHOTPLUG requests before suspend
driver core: firmware loader: don't cache FW_ACTION_NOHOTPLUG firmware
Documentation: Tidy up some drivers/base/core.c kerneldoc content.
platform_device: use a macro instead of platform_driver_register
firmware: move EXPORT_SYMBOL annotations
firmware: Avoid deadlock of usermodehelper lock at shutdown
dell_rbu: Select CONFIG_FW_LOADER_USER_HELPER explicitly
...
If sysfs_notify is called on a binary attribute, bad things can
happen, so prevent it.
Note, no in-kernel usage of this is currently present, but in the
future, it's good to be safe.
Changes in V2:
- Also ignore sysfs_notify on dirs, links
- Use WARN_ON rather than silently failing
- Compiled and tested (huge apologies about first submission)
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a typo subling->sibling in the comment of sysfs_link_sibling().
Signed-off-by: Warner Wang <warner.wang@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It might be a kernel disaster if one sysfs entry is freed but
still referenced by sysfs tree.
Recently Dave and Sasha reported one use-after-free problem on
sysfs entry, and the problem has been troubleshooted with help
of debug message added in this patch.
Given sysfs_get_dirent/sysfs_put are exported APIs, even inside
sysfs they are called in many contexts(kobject/attribe add/delete,
inode init/drop, dentry lookup/release, readdir, ...), it is healthful
to check the removed flag before freeing one entry and dump message
if it is freeing without being removed first.
Cc: Dave Jones <davej@redhat.com>
Cc: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The inode->i_mutex isn't hold when updating filp->f_pos
in read()/write(), so the filp->f_pos might be read as
0 or 1 in readdir() when there is concurrent read()/write()
on this same file, then may cause use after free in readdir().
The bug can be reproduced with Li Zefan's test code on the
link:
https://patchwork.kernel.org/patch/2160771/
This patch fixes the use after free under this situation.
Cc: stable <stable@vger.kernel.org>
Reported-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are two fixes for sysfs that resolve issues that have been found by the
Trinity fuzz tool, causing oopses in sysfs. They both have been in linux-next
for a while to ensure that they do not cause any other problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlFUdHUACgkQMUfUDdst+ykk+ACfWz6U/DW97ibFusDj+Sys1pEt
essAn15ZFy/pT5myhCvxqVH0MHrIftup
=BM+Q
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull sysfs fixes from Greg Kroah-Hartman:
"Here are two fixes for sysfs that resolve issues that have been found
by the Trinity fuzz tool, causing oopses in sysfs. They both have
been in linux-next for a while to ensure that they do not cause any
other problems."
* tag 'driver-core-3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: handle failure path correctly for readdir()
sysfs: fix race between readdir and lseek
Only allow unprivileged mounts of proc and sysfs if they are already
mounted when the user namespace is created.
proc and sysfs are interesting because they have content that is
per namespace, and so fresh mounts are needed when new namespaces
are created while at the same time proc and sysfs have content that
is shared between every instance.
Respect the policy of who may see the shared content of proc and sysfs
by only allowing new mounts if there was an existing mount at the time
the user namespace was created.
In practice there are only two interesting cases: proc and sysfs are
mounted at their usual places, proc and sysfs are not mounted at all
(some form of mount namespace jail).
Cc: stable@vger.kernel.org
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
It seems that sysfs has an interesting way of doing the same thing.
This removes the cpu_relax unfortunately, but if it's really needed,
it would be better to add this to include/linux/atomic.h to benefit
all atomic ops users.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of 'if (filp->f_pos == 0 or 1)' of sysfs_readdir(),
the failure from filldir() isn't handled, and the reference counter
of the sysfs_dirent object pointed by filp->private_data will be
released without clearing filp->private_data, so use after free
bug will be triggered later.
This patch returns immeadiately under the situation for fixing the bug,
and it is reasonable to return from readdir() when filldir() fails.
Reported-by: Dave Jones <davej@redhat.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While readdir() is running, lseek() may set filp->f_pos as zero,
then may leave filp->private_data pointing to one sysfs_dirent
object without holding its reference counter, so the sysfs_dirent
object may be used after free in next readdir().
This patch holds inode->i_mutex to avoid the problem since
the lock is always held in readdir path.
Reported-by: Dave Jones <davej@redhat.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I'm not sure why, but the hlist for each entry iterators were conceived
list_for_each_entry(pos, head, member)
The hlist ones were greedy and wanted an extra parameter:
hlist_for_each_entry(tpos, pos, head, member)
Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.
Besides the semantic patch, there was some manual work required:
- Fix up the actual hlist iterators in linux/list.h
- Fix up the declaration of other iterators based on the hlist ones.
- A very small amount of places were using the 'node' parameter, this
was modified to use 'obj->member' instead.
- Coccinelle didn't handle the hlist_for_each_entry_safe iterator
properly, so those had to be fixed up manually.
The semantic patch which is mostly the work of Peter Senna Tschudin is here:
@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;
type T;
expression a,c,d,e;
identifier b;
statement S;
@@
-T b;
<+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
...+>
[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs pile (part one) from Al Viro:
"Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
locking violations, etc.
The most visible changes here are death of FS_REVAL_DOT (replaced with
"has ->d_weak_revalidate()") and a new helper getting from struct file
to inode. Some bits of preparation to xattr method interface changes.
Misc patches by various people sent this cycle *and* ocfs2 fixes from
several cycles ago that should've been upstream right then.
PS: the next vfs pile will be xattr stuff."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
saner proc_get_inode() calling conventions
proc: avoid extra pde_put() in proc_fill_super()
fs: change return values from -EACCES to -EPERM
fs/exec.c: make bprm_mm_init() static
ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
ocfs2: fix possible use-after-free with AIO
ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
target: writev() on single-element vector is pointless
export kernel_write(), convert open-coded instances
fs: encode_fh: return FILEID_INVALID if invalid fid_type
kill f_vfsmnt
vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
nfsd: handle vfs_getattr errors in acl protocol
switch vfs_getattr() to struct path
default SET_PERSONALITY() in linux/elf.h
ceph: prepopulate inodes only when request is aborted
d_hash_and_lookup(): export, switch open-coded instances
9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
9p: split dropping the acls from v9fs_set_create_acl()
...
Here is the big driver core merge for 3.9-rc1
There are two major series here, both of which touch lots of drivers all
over the kernel, and will cause you some merge conflicts:
- add a new function called devm_ioremap_resource() to properly be
able to check return values.
- remove CONFIG_EXPERIMENTAL
If you need me to provide a merged tree to handle these resolutions,
please let me know.
Other than those patches, there's not much here, some minor fixes and
updates.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlEmV0cACgkQMUfUDdst+yncCQCfbmnQZju7kzWXk6PjdFuKspT9
weAAoMCzcAtEzzc4LXuUxxG/sXBVBCjW
=yWAQ
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core patches from Greg Kroah-Hartman:
"Here is the big driver core merge for 3.9-rc1
There are two major series here, both of which touch lots of drivers
all over the kernel, and will cause you some merge conflicts:
- add a new function called devm_ioremap_resource() to properly be
able to check return values.
- remove CONFIG_EXPERIMENTAL
Other than those patches, there's not much here, some minor fixes and
updates"
Fix up trivial conflicts
* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
base: memory: fix soft/hard_offline_page permissions
drivercore: Fix ordering between deferred_probe and exiting initcalls
backlight: fix class_find_device() arguments
TTY: mark tty_get_device call with the proper const values
driver-core: constify data for class_find_device()
firmware: Ignore abort check when no user-helper is used
firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
firmware: Make user-mode helper optional
firmware: Refactoring for splitting user-mode helper code
Driver core: treat unregistered bus_types as having no devices
watchdog: Convert to devm_ioremap_resource()
thermal: Convert to devm_ioremap_resource()
spi: Convert to devm_ioremap_resource()
power: Convert to devm_ioremap_resource()
mtd: Convert to devm_ioremap_resource()
mmc: Convert to devm_ioremap_resource()
mfd: Convert to devm_ioremap_resource()
media: Convert to devm_ioremap_resource()
iommu: Convert to devm_ioremap_resource()
drm: Convert to devm_ioremap_resource()
...
The most convenient way to expose ACPI power resources lists of a
device is to put symbolic links to sysfs directories representing
those resources into special attribute groups in the device's sysfs
directory. For this purpose, it is necessary to be able to add
symbolic links to attribute groups.
For this reason, add sysfs helper functions for adding/removing
symbolic links to/from attribute groups, sysfs_add_link_to_group()
and sysfs_remove_link_from_group(), respectively.
This change set includes a build fix from David Rientjes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 6ad58fa82d as %pSR
isn't in the tree yet.
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new vsprintf extension to avoid any possible
message interleaving.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the trailing white space in fs/sysfs/mount.c.
Signed-off-by: Bin Wang <wbin00@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull user namespace changes from Eric Biederman:
"While small this set of changes is very significant with respect to
containers in general and user namespaces in particular. The user
space interface is now complete.
This set of changes adds support for unprivileged users to create user
namespaces and as a user namespace root to create other namespaces.
The tyranny of supporting suid root preventing unprivileged users from
using cool new kernel features is broken.
This set of changes completes the work on setns, adding support for
the pid, user, mount namespaces.
This set of changes includes a bunch of basic pid namespace
cleanups/simplifications. Of particular significance is the rework of
the pid namespace cleanup so it no longer requires sending out
tendrils into all kinds of unexpected cleanup paths for operation. At
least one case of broken error handling is fixed by this cleanup.
The files under /proc/<pid>/ns/ have been converted from regular files
to magic symlinks which prevents incorrect caching by the VFS,
ensuring the files always refer to the namespace the process is
currently using and ensuring that the ptrace_mayaccess permission
checks are always applied.
The files under /proc/<pid>/ns/ have been given stable inode numbers
so it is now possible to see if different processes share the same
namespaces.
Through the David Miller's net tree are changes to relax many of the
permission checks in the networking stack to allowing the user
namespace root to usefully use the networking stack. Similar changes
for the mount namespace and the pid namespace are coming through my
tree.
Two small changes to add user namespace support were commited here adn
in David Miller's -net tree so that I could complete the work on the
/proc/<pid>/ns/ files in this tree.
Work remains to make it safe to build user namespaces and 9p, afs,
ceph, cifs, coda, gfs2, ncpfs, nfs, nfsd, ocfs2, and xfs so the
Kconfig guard remains in place preventing that user namespaces from
being built when any of those filesystems are enabled.
Future design work remains to allow root users outside of the initial
user namespace to mount more than just /proc and /sys."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (38 commits)
proc: Usable inode numbers for the namespace file descriptors.
proc: Fix the namespace inode permission checks.
proc: Generalize proc inode allocation
userns: Allow unprivilged mounts of proc and sysfs
userns: For /proc/self/{uid,gid}_map derive the lower userns from the struct file
procfs: Print task uids and gids in the userns that opened the proc file
userns: Implement unshare of the user namespace
userns: Implent proc namespace operations
userns: Kill task_user_ns
userns: Make create_new_namespaces take a user_ns parameter
userns: Allow unprivileged use of setns.
userns: Allow unprivileged users to create new namespaces
userns: Allow setting a userns mapping to your current uid.
userns: Allow chown and setgid preservation
userns: Allow unprivileged users to create user namespaces.
userns: Ignore suid and sgid on binaries if the uid or gid can not be mapped
userns: fix return value on mntns_install() failure
vfs: Allow unprivileged manipulation of the mount namespace.
vfs: Only support slave subtrees across different user namespaces
vfs: Add a user namespace reference from struct mnt_namespace
...
Nothing outside of fs/sysfs/file.c references this function, so mark it static.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- The context in which proc and sysfs are mounted have no
effect on the the uid/gid of their files so no conversion is
needed except allowing the mount.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The warning check for duplicate sysfs entries can cause a buffer overflow
when printing the warning, as strcat() doesn't check buffer sizes.
Use strlcat() instead.
Since strlcat() doesn't return a pointer to the passed buffer, unlike
strcat(), I had to convert the nested concatenation in sysfs_add_one() to
an admittedly more obscure comma operator construct, to avoid emitting code
for the concatenation if CONFIG_BUG is disabled.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull second vfs pile from Al Viro:
"The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the
deadlock reproduced by xfstests 068), symlink and hardlink restriction
patches, plus assorted cleanups and fixes.
Note that another fsfreeze deadlock (emergency thaw one) is *not*
dealt with - the series by Fernando conflicts a lot with Jan's, breaks
userland ABI (FIFREEZE semantics gets changed) and trades the deadlock
for massive vfsmount leak; this is going to be handled next cycle.
There probably will be another pull request, but that stuff won't be
in it."
Fix up trivial conflicts due to unrelated changes next to each other in
drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c}
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
delousing target_core_file a bit
Documentation: Correct s_umount state for freeze_fs/unfreeze_fs
fs: Remove old freezing mechanism
ext2: Implement freezing
btrfs: Convert to new freezing mechanism
nilfs2: Convert to new freezing mechanism
ntfs: Convert to new freezing mechanism
fuse: Convert to new freezing mechanism
gfs2: Convert to new freezing mechanism
ocfs2: Convert to new freezing mechanism
xfs: Convert to new freezing code
ext4: Convert to new freezing mechanism
fs: Protect write paths by sb_start_write - sb_end_write
fs: Skip atime update on frozen filesystem
fs: Add freezing handling to mnt_want_write() / mnt_drop_write()
fs: Improve filesystem freezing handling
switch the protection of percpu_counter list to spinlock
nfsd: Push mnt_want_write() outside of i_mutex
btrfs: Push mnt_want_write() outside of i_mutex
fat: Push mnt_want_write() outside of i_mutex
...
Here's the big driver core pull request for 3.6-rc1.
Unlike 3.5, this kernel should be a lot tamer, with the printk changes now
settled down. All we have here is some extcon driver updates, w1 driver
updates, a few printk cleanups that weren't needed for 3.5, but are good to
have now, and some other minor fixes/changes in the driver core.
All of these have been in the linux-next releases for a while now.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iEYEABECAAYFAlARgIUACgkQMUfUDdst+ynDHgCfRNwIB9L+zZvjcKE5e1BhDbUl
wVUAn398DFgbJ1+PjGkd1EMR2uVTh7Ou
=MIFu
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core changes from Greg Kroah-Hartman:
"Here's the big driver core pull request for 3.6-rc1.
Unlike 3.5, this kernel should be a lot tamer, with the printk changes
now settled down. All we have here is some extcon driver updates, w1
driver updates, a few printk cleanups that weren't needed for 3.5, but
are good to have now, and some other minor fixes/changes in the driver
core.
All of these have been in the linux-next releases for a while now.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits)
printk: Export struct log size and member offsets through vmcoreinfo
Drivers: hv: Change the hex constant to a decimal constant
driver core: don't trigger uevent after failure
extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device
sysfs: fail dentry revalidation after namespace change fix
sysfs: fail dentry revalidation after namespace change
extcon: spelling of detach in function doc
extcon: arizona: Stop microphone detection if we give up on it
extcon: arizona: Update cable reporting calls and split headset
PM / Runtime: Do not increment device usage counts before probing
kmsg - do not flush partial lines when the console is busy
kmsg - export "continuation record" flag to /dev/kmsg
kmsg - avoid warning for CONFIG_PRINTK=n compilations
kmsg - properly print over-long continuation lines
driver-core: Use kobj_to_dev instead of re-implementing it
driver-core: Move kobj_to_dev from genhd.h to device.h
driver core: Move deferred devices to the end of dpm_list before probing
driver core: move uevent call to driver_register
driver core: fix shutdown races with probe/remove(v3)
Extcon: Arizona: Add driver for Wolfson Arizona class devices
...
don't assume that KOBJ_NS_TYPE_NONE==0. Also save a test-n-branch.
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we change the namespace tag of a sysfs entry, the associated dentry
is still kept around. readdir() will work correctly and not display the
old entries, but open() will still succeed, so will reads and writes.
This will no longer happen if sysfs is remounted, hinting that this is a
cache-related problem.
I am using the following sequence to demonstrate that:
shell1:
ip link add type veth
unshare -nm
shell2:
ip link set veth1 <pid_of_shell_1>
cat /sys/devices/virtual/net/veth1/ifindex
Before that patch, this will succeed (fail to fail). After it, it will
correctly return an error. Differently from a normal rename, which we
handle fine, changing the object namespace will keep it's path intact.
So this check seems necessary as well.
[ v2: get type from parent, as suggested by Eric Biederman ]
Signed-off-by: Glauber Costa <glommer@parallels.com>
CC: Tejun Heo <tj@kernel.org>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pass mount flags to sget() so that it can use them in initialising a new
superblock before the set function is called. They could also be passed to the
compare function.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
a) ->d_iput() is wrong here - what we do to inode is completely usual, it's
dentry->d_fsdata that we want to drop. Just use ->d_release().
b) switch to ->s_d_op - no need to play with d_set_d_op()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Just the flags; only NFS cares even about that, but there are
legitimate uses for such argument. And getting rid of that
completely would require splitting ->lookup() into a couple
of methods (at least), so let's leave that alone for now...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=oLXf
-----END PGP SIGNATURE-----
Merge tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux
Pull writeback tree from Wu Fengguang:
"Mainly from Jan Kara to avoid iput() in the flusher threads."
* tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
writeback: Avoid iput() from flusher thread
vfs: Rename end_writeback() to clear_inode()
vfs: Move waiting for inode writeback from end_writeback() to evict_inode()
writeback: Refactor writeback_single_inode()
writeback: Remove wb->list_lock from writeback_single_inode()
writeback: Separate inode requeueing after writeback
writeback: Move I_DIRTY_PAGES handling
writeback: Move requeueing when I_SYNC set to writeback_sb_inodes()
writeback: Move clearing of I_SYNC into inode_sync_complete()
writeback: initialize global_dirty_limit
fs: remove 8 bytes of padding from struct writeback_control on 64 bit builds
mm: page-writeback.c: local functions should not be exposed globally
Pull user namespace enhancements from Eric Biederman:
"This is a course correction for the user namespace, so that we can
reach an inexpensive, maintainable, and reasonably complete
implementation.
Highlights:
- Config guards make it impossible to enable the user namespace and
code that has not been converted to be user namespace safe.
- Use of the new kuid_t type ensures the if you somehow get past the
config guards the kernel will encounter type errors if you enable
user namespaces and attempt to compile in code whose permission
checks have not been updated to be user namespace safe.
- All uids from child user namespaces are mapped into the initial
user namespace before they are processed. Removing the need to add
an additional check to see if the user namespace of the compared
uids remains the same.
- With the user namespaces compiled out the performance is as good or
better than it is today.
- For most operations absolutely nothing changes performance or
operationally with the user namespace enabled.
- The worst case performance I could come up with was timing 1
billion cache cold stat operations with the user namespace code
enabled. This went from 156s to 164s on my laptop (or 156ns to
164ns per stat operation).
- (uid_t)-1 and (gid_t)-1 are reserved as an internal error value.
Most uid/gid setting system calls treat these value specially
anyway so attempting to use -1 as a uid would likely cause
entertaining failures in userspace.
- If setuid is called with a uid that can not be mapped setuid fails.
I have looked at sendmail, login, ssh and every other program I
could think of that would call setuid and they all check for and
handle the case where setuid fails.
- If stat or a similar system call is called from a context in which
we can not map a uid we lie and return overflowuid. The LFS
experience suggests not lying and returning an error code might be
better, but the historical precedent with uids is different and I
can not think of anything that would break by lying about a uid we
can't map.
- Capabilities are localized to the current user namespace making it
safe to give the initial user in a user namespace all capabilities.
My git tree covers all of the modifications needed to convert the core
kernel and enough changes to make a system bootable to runlevel 1."
Fix up trivial conflicts due to nearby independent changes in fs/stat.c
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
userns: Silence silly gcc warning.
cred: use correct cred accessor with regards to rcu read lock
userns: Convert the move_pages, and migrate_pages permission checks to use uid_eq
userns: Convert cgroup permission checks to use uid_eq
userns: Convert tmpfs to use kuid and kgid where appropriate
userns: Convert sysfs to use kgid/kuid where appropriate
userns: Convert sysctl permission checks to use kuid and kgids.
userns: Convert proc to use kuid/kgid where appropriate
userns: Convert ext4 to user kuid/kgid where appropriate
userns: Convert ext3 to use kuid/kgid where appropriate
userns: Convert ext2 to use kuid/kgid where appropriate.
userns: Convert devpts to use kuid/kgid where appropriate
userns: Convert binary formats to use kuid/kgid where appropriate
userns: Add negative depends on entries to avoid building code that is userns unsafe
userns: signal remove unnecessary map_cred_ns
userns: Teach inode_capable to understand inodes whose uids map to other namespaces.
userns: Fail exec for suid and sgid binaries with ids outside our user namespace.
userns: Convert stat to return values mapped from kuids and kgids
userns: Convert user specfied uids and gids in chown into kuids and kgid
userns: Use uid_eq gid_eq helpers when comparing kuids and kgids in the vfs
...
This patch (as1554) fixes a lockdep false-positive report. The
problem arises because lockdep is unable to deal with the
tree-structured locks created by the device core and sysfs.
This particular problem involves a sysfs attribute method that
unregisters itself, not from the device it was called for, but from a
descendant device. Lockdep doesn't understand the distinction and
reports a possible deadlock, even though the operation is safe.
This is the sort of thing that would normally be handled by using a
nested lock annotation; unfortunately it's not feasible to do that
here. There's no sensible way to tell sysfs when attribute removal
occurs in the context of a parent attribute method.
As a workaround, the patch adds a new flag to struct attribute
telling sysfs not to inform lockdep when it acquires a readlock on a
sysfs_dirent instance for the attribute. The readlock is still
acquired, but lockdep doesn't know about it and hence does not
complain about impossible deadlock scenarios.
Also added are macros for static initialization of attribute
structures with the ignore_lockdep flag set. The three offending
attributes in the USB subsystem are converted to use the new macros.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Tejun Heo <tj@kernel.org>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After we moved inode_sync_wait() from end_writeback() it doesn't make sense
to call the function end_writeback() anymore. Rename it to clear_inode()
which well says what the function really does - set I_CLEAR flag.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Since no one using "dup_name", removed it completely in sysfs_rename.
Signed-off-by: Sasikantha babu <sasikanth.v19@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In scsi at least two cases of the parent device being deleted before the
child is added have been observed.
1/ scsi is performing async scans and the device is removed prior to the
async can thread running (can happen with an in-opportune / unlikely
unplug during initial scan).
2/ libsas discovery event running after the parent port has been torn
down (this is a bug in libsas).
Result in crash signatures like:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000098
IP: [<ffffffff8115e100>] sysfs_create_dir+0x32/0xb6
...
Process scsi_scan_8 (pid: 5417, threadinfo ffff88080bd16000, task ffff880801b8a0b0)
Stack:
00000000fffffffe ffff880813470628 ffff88080bd17cd0 ffff88080614b7e8
ffff88080b45c108 00000000fffffffe ffff88080bd17d20 ffffffff8125e4a8
ffff88080bd17cf0 ffffffff81075149 ffff88080bd17d30 ffff88080614b7e8
Call Trace:
[<ffffffff8125e4a8>] kobject_add_internal+0x120/0x1e3
[<ffffffff81075149>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff8125e641>] kobject_add_varg+0x41/0x50
[<ffffffff8125e70b>] kobject_add+0x64/0x66
[<ffffffff8131122b>] device_add+0x12d/0x63a
In this scenario the parent is still valid (because we have a
reference), but it has been device_del()'d which means its kobj->sd
pointer is NULL'd via:
device_del()->kobject_del()->sysfs_remove_dir()
...and then sysfs_create_dir() (without this fix) goes ahead and
de-references parent_sd via sysfs_ns_type():
return (sd->s_flags & SYSFS_NS_TYPE_MASK) >> SYSFS_NS_TYPE_SHIFT;
This scenario is being fixed in scsi/libsas, but if other subsystems
present the same ordering the system need not immediately crash.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: James Bottomley <JBottomley@parallels.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is needed to allow renaming network devices that have been moved
to another network namespace.
Signed-off-by: Tom Goff <thomas.goff@boeing.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull vfs pile 1 from Al Viro:
"This is _not_ all; in particular, Miklos' and Jan's stuff is not there
yet."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (64 commits)
ext4: initialization of ext4_li_mtx needs to be done earlier
debugfs-related mode_t whack-a-mole
hfsplus: add an ioctl to bless files
hfsplus: change finder_info to u32
hfsplus: initialise userflags
qnx4: new helper - try_extent()
qnx4: get rid of qnx4_bread/qnx4_getblk
take removal of PF_FORKNOEXEC to flush_old_exec()
trim includes in inode.c
um: uml_dup_mmap() relies on ->mmap_sem being held, but activate_mm() doesn't hold it
um: embed ->stub_pages[] into mmu_context
gadgetfs: list_for_each_safe() misuse
ocfs2: fix leaks on failure exits in module_init
ecryptfs: make register_filesystem() the last potential failure exit
ntfs: forgets to unregister sysctls on register_filesystem() failure
logfs: missing cleanup on register_filesystem() failure
jfs: mising cleanup on register_filesystem() failure
make configfs_pin_fs() return root dentry on success
configfs: configfs_create_dir() has parent dentry in dentry->d_parent
configfs: sanitize configfs_create()
...
This reverts commit 524b6c5b39.
It has shown to break userspace tools, which is not acceptable.
Reported-by: Jiri Slaby <jslaby@suse.cz>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This was done to resolve a merge and build problem with the
drivers/acpi/processor_driver.c file.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes a bug introduced with sysfs name hashes where renaming a
network device appears to succeed but silently makes the sysfs files for
that network device inaccessible.
In at least one configuration this bug has stopped networking from
coming up during boot.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Tested-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There is a misleading difference between /proc and /sys permissions, /proc is 0555 and /sys is 0755. But
as it is impossible to create or unlink something in /sys it would be nice to have same permissions.
Signed-off-by: Vitaly Kuznetsov <vitty@altlinux.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tracking the number of subdirectories requires an extra field that increases
the size of sysfs_dirent. nlinks are not particularly interesting for sysfs
and the nlink counts are wrong when network namespaces are involved so stop
counting them, and always return nlink == 1. Userspace already knows that
directories with nlink == 1 have an nlink count they can't use to count
subdirectories.
This reduces the size of sysfs_dirent by 8 bytes on 64bit platforms.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Store the sysfs inode number in an unsided int because
ida inode allocator can return at most a 31 bit number,
reducing the size of struct sysfs_dirent by 8 bytes
on 64bit platforms.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
On 32bit this reduces sizeof(struct sysfs_dirent) by 2 bytes.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Compute a 31 bit hash of directory entries (that can fit in a signed
32bit off_t) and index the sysfs directory entries by that hash,
replacing the per directory indexes by name and by inode. Because we
now only use a single rbtree this reduces the size of sysfs_dirent by 2
pointers. Because we have fewer cases to deal with the code is now
simpler.
For now I use the simple hash that the dcache uses as that is easy to
use and seems simple enough.
In addition to makeing the code simpler using a hash for the file
position in readdir brings sysfs in line with other filesystems that
have non-trivial directory structures.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Recently an OOPS was observed from the usb serial io_ti driver when it tried to remove
sysfs directories. Upon investigation it turns out this driver was always buggy
and that a recent sysfs change had stopped guarding itself against removing attributes
from sysfs directories that had already been removed. :(
Historically we have been silent about attempting to files from nonexistent sysfs
directories and have politely returned error codes. That has resulted in people writing
broken code that ignores the error codes.
Issue a kernel WARNING and a stack backtrace to make it clear in no uncertain
terms that abusing sysfs is not ok, and the callers need to fix their code.
This change transforms the io_ti OOPS into a more comprehensible error message
and stack backtrace.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Reported-by: Wolfgang Frisch <wfpub@roembden.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace remaining direct i_nlink updates with a new set_nlink()
updater function.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In sysfs_rename we need to remove the optimization of not calling
sysfs_unlink_sibling and sysfs_link_sibling if the renamed parent
directory is not changing. This optimization is no longer valid now
that sysfs dirents are stored in an rbtree sorted by name.
Move the assignment of s_ns before the call of sysfs_link_sibling. With
no sysfs_dirent fields changing after the call of sysfs_link_sibling
this allows sysfs_link_sibling to take any of the directory entries into
account when it builds the rbtrees, and s_ns looks like a prime canidate
to be used in the rbtree in the future.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Greg KH <gregkh@suse.de>
Cc: David Miller <davem@davemloft.net>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In commit 8a9ea3237e ("Merge git://.../davem/net-next") where my sysfs
changes from the net tree merged with the sysfs rbtree changes from
Mickulas Patocka the conflict resolution failed to preserve the
simplified property that was the point of my changes.
That is sysfs_find_dirent can now say something is a match if and only
s_name and s_ns match what we are looking for, and sysfs_readdir can
simply return all of the directory entries where s_ns matches the
directory that we should be returning.
Now that we are back to exact matches we can tweak sysfs_find_dirent and
the name rb_tree to order sysfs_dirents by s_ns s_name and remove the
second loop in sysfs_find_dirent. However that change seems a bit much
for a conflict resolution so it can come later.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits)
dp83640: free packet queues on remove
dp83640: use proper function to free transmit time stamping packets
ipv6: Do not use routes from locally generated RAs
|PATCH net-next] tg3: add tx_dropped counter
be2net: don't create multiple RX/TX rings in multi channel mode
be2net: don't create multiple TXQs in BE2
be2net: refactor VF setup/teardown code into be_vf_setup/clear()
be2net: add vlan/rx-mode/flow-control config to be_setup()
net_sched: cls_flow: use skb_header_pointer()
ipv4: avoid useless call of the function check_peer_pmtu
TCP: remove TCP_DEBUG
net: Fix driver name for mdio-gpio.c
ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT
rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces
ipv4: fix ipsec forward performance regression
jme: fix irq storm after suspend/resume
route: fix ICMP redirect validation
net: hold sock reference while processing tx timestamps
tcp: md5: add more const attributes
Add ethtool -g support to virtio_net
...
Fix up conflicts in:
- drivers/net/Kconfig:
The split-up generated a trivial conflict with removal of a
stale reference to Documentation/networking/net-modules.txt.
Remove it from the new location instead.
- fs/sysfs/dir.c:
Fairly nasty conflicts with the sysfs rb-tree usage, conflicting
with Eric Biederman's changes for tagged directories.
sysfs is a core piece of ifrastructure that many people use and
few people have all of the rules in their head on how to use
it correctly. Add warnings for people using tagged directories
improperly to that any misuses can be caught and diagnosed quickly.
A single inexpensive test in sysfs_find_dirent is almost sufficient
to catch all possible misuses. An additional warning is needed
in sysfs_add_dirent so that we actually fail when attempting to
add an untagged dirent in a tagged directory.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that /sys/class/net/bonding_masters is implemented as a tagged sysfs
file we can remove support for untagged files in tagged directories.
This change removes any ambiguity of what a NULL namespace value
means. A NULL namespace parameter after this patch means
that we are talking about an untagged sysfs dirent.
This makes the sysfs code much less prone to mistakes when during
maintenance.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Looking up files in sysfs is hard to understand and analyize because we
currently allow placing untagged files in tagged directories. In the
implementation of that we have two subtly different meanings of NULL.
NULL meaning there is no tag on a directory entry and NULL meaning
we don't care which namespace the lookup is performed for. This
multiple uses of NULL have resulted in subtle bugs (since fixed)
in the code.
Currently it is only the bonding driver that needs to have an untagged
file in a tagged directory.
To untagle this mess I am adding support for tagged files to sysfs.
Modifying the bonding driver to implement bonding_masters as a tagged
file. Registering bonding_masters once for each network namespace.
Then I am removing support for untagged entries in tagged sysfs
directories.
Resulting in code that is much easier to reason about.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
"sysfs: use rb-tree for inode number lookup" added a new printk which
causes a new compile warning on s390 (and few other architectures):
fs/sysfs/dir.c: In function 'sysfs_link_sibling':
fs/sysfs/dir.c:63:4: warning: format '%lx' expects argument of type
'long unsigned int', but argument 2 has type 'ino_t' [-Wform
Add an explicit unsigned long cast since ino_t is an unsigned long on
most architectures.
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
sysfs: use rb-tree for inode number lookup
This patch makes sysfs use red-black tree for inode number lookup.
Together with a previous patch to use red-black tree for name lookup,
this patch makes all sysfs lookups to have O(log n) complexity.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
sysfs: remove s_sibling hacks
s_sibling was used for three different purposes:
1) as a linked list of entries in the directory
2) as a linked list of entries to be deleted
3) as a pointer to "struct completion"
This patch removes the hack and introduces new union u which
holds pointers for cases 2) and 3).
This change is needed for the following patch that removes s_sibling at all
and replaces it with a rb tree.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
sysfs: use rb-tree for name lookups
Use red-black tree for name lookups.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
sysfs: count subdirectories
This patch introduces a subdirectory counter for each sysfs directory.
Without the patch, sysfs_refresh_inode would walk all entries of the directory
to calculate the number of subdirectories.
This patch improves time of "ls -la /sys/block" when there are 10000 block
devices from 9 seconds to 0.19 seconds.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
its value depends only on inode and does not change; we might as
well store it in ->i_op->check_acl and be done with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* new refcount in struct net, controlling actual freeing of the memory
* new method in kobj_ns_type_operations (->drop_ns())
* ->current_ns() semantics change - it's supposed to be followed by
corresponding ->drop_ns(). For struct net in case of CONFIG_NET_NS it bumps
the new refcount; net_drop_ns() decrements it and calls net_free() if the
last reference has been dropped. Method renamed to ->grab_current_ns().
* old net_free() callers call net_drop_ns() instead.
* sysfs_exit_ns() is gone, along with a large part of callchain
leading to it; now that the references stored in ->ns[...] stay valid we
do not need to hunt them down and replace them with NULL. That fixes
problems in sysfs_lookup() and sysfs_readdir(), along with getting rid
of sb->s_instances abuse.
Note that struct net *shutdown* logics has not changed - net_cleanup()
is called exactly when it used to be called. The only thing postponed by
having a sysfs instance refering to that struct net is actual freeing of
memory occupied by struct net.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
On some arches (x86, sh, arm, unicore, powerpc) the oops message would
print out the last sysfs file accessed.
This was very useful in finding a number of sysfs and driver core bugs
in the 2.5 and early 2.6 development days, but it has been a number of
years since this file has actually helped in debugging anything that
couldn't also be trivially determined from the stack traceback.
So it's time to delete the line. This is good as we need all the space
we can get for oops messages at times on consoles.
Acked-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix what is clearly a simple copy-and-paste error in commenting the
sysfs_update_group() routine.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.
This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel. A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).
Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
driver core: Document that device_rename() is only for networking
sysfs: remove useless test from sysfs_merge_group
driver-core: merge private parts of class and bus
driver core: fix whitespace in class_attr_string
Remove kobject.h from files which don't need it, notably,
sched.h and fs.h.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Require filesystems be aware of .d_revalidate being called in rcu-walk
mode (nd->flags & LOOKUP_RCU). For now do a simple push down, returning
-ECHILD from all implementations.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Reduce some branches and memory accesses in dcache lookup by adding dentry
flags to indicate common d_ops are set, rather than having to check them.
This saves a pointer memory access (dentry->d_op) in common path lookup
situations, and saves another pointer load and branch in cases where we
have d_op but not the particular operation.
Patched with:
git grep -E '[.>]([[:space:]])*d_op([[:space:]])*=' | xargs sed -e 's/\([^\t ]*\)->d_op = \(.*\);/d_set_d_op(\1, \2);/' -e 's/\([^\t ]*\)\.d_op = \(.*\);/d_set_d_op(\&\1, \2);/' -i
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Change d_delete from a dentry deletion notification to a dentry caching
advise, more like ->drop_inode. Require it to be constant and idempotent,
and not take d_lock. This is how all existing filesystems use the callback
anyway.
This makes fine grained dentry locking of dput and dentry lru scanning
much simpler.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Dan Carpenter pointed out that the new sysfs_merge_group() and
sysfs_unmerge_group() routines requires their grp argument to be
non-NULL, because they dereference grp to obtain the list of
attributes. Hence it's pointless for the routines to include a test
and special-case handling for when grp is NULL. This patch (as1433)
removes the unneeded tests.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (31 commits)
driver core: Display error codes when class suspend fails
Driver core: Add section count to memory_block struct
Driver core: Add mutex for adding/removing memory blocks
Driver core: Move find_memory_block routine
hpilo: Despecificate driver from iLO generation
driver core: Convert link_mem_sections to use find_memory_block_hinted.
driver core: Introduce find_memory_block_hinted which utilizes kset_find_obj_hinted.
kobject: Introduce kset_find_obj_hinted.
driver core: fix build for CONFIG_BLOCK not enabled
driver-core: base: change to new flag variable
sysfs: only access bin file vm_ops with the active lock
sysfs: Fail bin file mmap if vma close is implemented.
FW_LOADER: fix kconfig dependency warning on HOTPLUG
uio: Statically allocate uio_class and use class .dev_attrs.
uio: Support 2^MINOR_BITS minors
uio: Cleanup irq handling.
uio: Don't clear driver data
uio: Fix lack of locking in init_uio_class
SYSFS: Allow boot time switching between deprecated and modern sysfs layout
driver core: remove CONFIG_SYSFS_DEPRECATED_V2 but keep it for block devices
...
bb->vm_ops is a cached copy of the vm_ops of the underlying
sysfs bin file, which means that after sysfs_bin_remove_file
completes it is only longer valid to deference bb->vm_ops.
So move all of the tests of bb->vm_ops inside of where
we hold the sysfs active lock.
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It is not reasonably possible to wrap vma->close(). To correctly
wrap close would imply calling close on any vmas that remain when
sysfs_remove_bin_file is called. Finding the proper lists walking
them getting the locking right etc, requires deep knowledge of the
mm subsystem and as such would require assistence from the mm
subsystem to implement. That assistence does not currently exist.
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch (as1420) adds sysfs_merge_group() and sysfs_unmerge_group()
functions, allowing drivers easily to add and remove sets of
attributes to a pre-existing attribute group directory.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
d_path() returns an ERR_PTR and it doesn't return NULL.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: stable <stable@kernel.org>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
no need for list_for_each_entry_safe()/resetting with superblock list
Fix sget() race with failing mount
vfs: don't hold s_umount over close_bdev_exclusive() call
sysv: do not mark superblock dirty on remount
sysv: do not mark superblock dirty on mount
btrfs: remove junk sb_dirt change
BFS: clean up the superblock usage
AFFS: wait for sb synchronization when needed
AFFS: clean up dirty flag usage
cifs: truncate fallout
mbcache: fix shrinker function return value
mbcache: Remove unused features
add f_flags to struct statfs(64)
pass a struct path to vfs_statfs
update VFS documentation for method changes.
All filesystems that need invalidate_inode_buffers() are doing that explicitly
convert remaining ->clear_inode() to ->evict_inode()
Make ->drop_inode() just return whether inode needs to be dropped
fs/inode.c:clear_inode() is gone
fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
...
Fix up trivial conflicts in fs/nilfs2/super.c
Despite its name it's now a generic implementation of ->setattr, but
rather a helper to copy attributes from a struct iattr to the inode.
Rename it to setattr_copy to reflect this fact.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
sysfs_chmod_file doesn't change the attribute it operates on, so this
attribute can be marked const.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Supporting symlinks from untagged to tagged directories is reasonable,
and needed to support CONFIG_SYSFS_DEPRECATED. So don't fail a prior
allowing that case to work.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This happens for network devices when SYSFS_DEPRECATED is enabled.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Recently my tagged sysfs support revealed a flaw in the device core
that a few rare drivers are running into such that we don't always put
network devices in a class subdirectory named net/.
Since we are not creating the class directory the network devices wind
up in a non-tagged directory, but the symlinks to the network devices
from /sys/class/net are in a tagged directory. All of which works
until we go to remove or rename the symlink. When we remove or rename
a symlink we look in the namespace of the target of the symlink.
Since the target of the symlink is in a non-tagged sysfs directory we
don't have a namespace to look in, and we fail to remove the symlink.
Detect this problem up front and simply don't create symlinks we won't
be able to remove later. This prevents symlink leakage and fails in
a much clearer and more understandable way.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
sysfs and configfs setattr functions have error cases after the generic inode's
attributes have been changed. Fix consistency by changing the generic inode
attributes only when it is guaranteed to succeed.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Convert simple filesystems: ramfs, configfs, sysfs, block_dev to new truncate
sequence.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This allows bin_attr->read,write,mmap callbacks to check file specific data
(such as inode owner) as part of any privilege validation.
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In Al's latest vfs tree the code is reworked and S_BIAS has been removed.
It turns out that checking to see if a super block is in the
middle of an unmount in sysfs_exit_ns is unnecessary because we
remove the super_block from the s_supers/s_instances list before
struct sysfs_super_info pointed to by sb->s_fs_info is freed.
For now just delete the unnecessary check to see if a superblock is in the
middle of an unmount, it isn't necessary with or without Al's changes
and it just causes a needless conflict.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add some in-line comments to explain the new infrastructure, which
was introduced to support sysfs directory tagging with namespaces.
I think an overall description someplace might be good too, but it
didn't really seem to fit into Documentation/filesystems/sysfs.txt,
which appears more geared toward users, rather than maintainers, of
sysfs.
(Tejun, please let me know if I can make anything clearer or failed
altogether to comment something that should be commented.)
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When removing a symlink sysfs_remove_link does not provide
enough information to figure out which tagged directory the symlink
falls in. So I need sysfs_delete_link which is passed the target
of the symlink to delete.
sysfs_rename_link is updated to call sysfs_delete_link instead
of sysfs_remove_link as we have all of the information necessary
and the callers are interesting.
Both of these functions now have enough information to find a symlink
in a tagged directory. The only restriction is that they must be called
before the target kobject is renamed or deleted. If they are called
later I loose track of which tag the target kobject was marked with
and can no longer find the old symlink to remove it.
This patch was split from an earlier patch.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I had hopped to avoid this but the bonding driver adds a file
to /sys/class/net/ and the easiest way to handle that file is
to make it untagged and to register it only once.
So relax the rules on tagged directories, and make bonding work.
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The problem. When implementing a network namespace I need to be able
to have multiple network devices with the same name. Currently this
is a problem for /sys/class/net/*, /sys/devices/virtual/net/*, and
potentially a few other directories of the form /sys/ ... /net/*.
What this patch does is to add an additional tag field to the
sysfs dirent structure. For directories that should show different
contents depending on the context such as /sys/class/net/, and
/sys/devices/virtual/net/ this tag field is used to specify the
context in which those directories should be visible. Effectively
this is the same as creating multiple distinct directories with
the same name but internally to sysfs the result is nicer.
I am calling the concept of a single directory that looks like multiple
directories all at the same path in the filesystem tagged directories.
For the networking namespace the set of directories whose contents I need
to filter with tags can depend on the presence or absence of hotplug
hardware or which modules are currently loaded. Which means I need
a simple race free way to setup those directories as tagged.
To achieve a reace free design all tagged directories are created
and managed by sysfs itself.
Users of this interface:
- define a type in the sysfs_tag_type enumeration.
- call sysfs_register_ns_types with the type and it's operations
- sysfs_exit_ns when an individual tag is no longer valid
- Implement mount_ns() which returns the ns of the calling process
so we can attach it to a sysfs superblock.
- Implement ktype.namespace() which returns the ns of a syfs kobject.
Everything else is left up to sysfs and the driver layer.
For the network namespace mount_ns and namespace() are essentially
one line functions, and look to remain that.
Tags are currently represented a const void * pointers as that is
both generic, prevides enough information for equality comparisons,
and is trivial to create for current users, as it is just the
existing namespace pointer.
The work needed in sysfs is more extensive. At each directory
or symlink creating I need to check if the directory it is being
created in is a tagged directory and if so generate the appropriate
tag to place on the sysfs_dirent. Likewise at each symlink or
directory removal I need to check if the sysfs directory it is
being removed from is a tagged directory and if so figure out
which tag goes along with the name I am deleting.
Currently only directories which hold kobjects, and
symlinks are supported. There is not enough information
in the current file attribute interfaces to give us anything
to discriminate on which makes it useless, and there are
no potential users which makes it an uninteresting problem
to solve.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add all of the necessary bioler plate to support
multiple superblocks in sysfs.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Links for each port are created in sysfs using the device
name, but this could be changed after being added to the
bridge.
As well as being unable to remove interfaces after this
occurs (because userspace tools don't recognise the new
name, and the kernel won't recognise the old name), adding
another interface with the old name to the bridge will
cause an error trying to create the sysfs link.
This fixes the problem by listening for NETDEV_CHANGENAME
notifications and renaming the link.
https://bugzilla.kernel.org/show_bug.cgi?id=12743
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Now that there are no more users we can remove
the sysfs_sb variable.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Currently sysfs_get_inode magically returns an inode on
sysfs_sb. Make the super_block parameter explicit and
the code becomes clearer.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Because of rename ordering problems we occassionally give false
warnings about invalid sysfs operations. So using sysfs_rename
create a sysfs_rename_link function that doesn't need strange
workarounds.
Cc: Benjamin Thery <benjamin.thery@bull.net>
Cc: Daniel Lezcano <dlezcano@fr.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Placing the 16bit s_mode between a pointer and a long doesn't pack well
especailly on 64bit where we wast 48 bits. So move s_mode and
declare it as a unsigned short. This is the sysfs backing store
after all we don't need fields extra large just in case someday
we want userspace to be able to use a larger value.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The vfs depends upon filesystem methods to update the
vfs inode. Sysfs adds to the normal number of places
where the vfs inode is updated by also updatng the
vfs inode in sysfs_refresh_inode.
Typically the inode mutex is used to serialize updates
to the vfs inode, but grabbing the inode mutex in
sysfs_permission and sysfs_getattr causes deadlocks,
because sometimes the vfs calls those operations with
the inode mutex held. Therefore sysfs can not use the
inode mutex to serial updates to the vfs inode.
The sysfs_mutex is acquired in all of the routines
where sysfs updates the vfs inode, and with a small
change we can consistently protext sysfs vfs inode
updates with the sysfs_mutex. To protect the sysfs
vfs inode updates with the sysfs_mutex simply requires
extending the scope of sysfs_mutex in sysfs_setattr
over inode_setattr, and over inode_change_ok (so we
have an unchanging inode when we perform the check).
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Acknowledge that the logical sysfs rwsem has one instance per
sysfs attribute with different locking depencencies for different
attributes.
There is a sysfs idiom where writing to one sysfs file causes the
addition or removal of other sysfs files. Lumping all of the
sysfs attributes together in one lock class causes lockdep to
generate lots of false positives.
This introduces the requirement that non-static sysfs attributes
need to be initialized with sysfs_attr_init or sysfs_bin_attr_init.
Strictly speaking this requirement only exists when lockdep is
enabled, and when lockdep is enabled we get a bit fat warning
if this requirement is not met.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If we exclude directories and symlinks from the set of sysfs
dirents where we need active references we are left with
sysfs attributes (binary or not).
- Tweak sysfs_deactivate to only do something on attributes
- Move lockdep initialization into sysfs_file_add_mode to
limit it to just attributes.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It turns out that holding an active reference on a directory is
pointless. The purpose of the active references are to allows us to
block when removing sysfs entries that have custom methods so we don't
remove modules while running modular code and to keep those custom
methods from accessing data structures after the files have been
removed. Further sysfs_remove_dir remove all elements in the
directory before removing the directory itself, so there is no chance
we will remove a directory with active children.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Constify struct sysfs_ops.
This is part of the ops structure constification
effort started by Arjan van de Ven et al.
Benefits of this constification:
* prevents modification of data that is shared
(referenced) by many other structure instances
at runtime
* detects/prevents accidental (but not intentional)
modification attempts on archs that enforce
read-only kernel data at runtime
* potentially better optimized code as the compiler
can assume that the const data cannot be changed
* the compiler/linker move const data into .rodata
and therefore exclude them from false sharing
Signed-off-by: Emese Revfy <re.emese@gmail.com>
Acked-by: David Teigland <teigland@redhat.com>
Acked-by: Matt Domsch <Matt_Domsch@dell.com>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When sysfs_readdir stops short we now cache the next
sysfs_dirent to return to user space in filp->private_data.
There is no impact on the rest of sysfs by doing this and
in the common case it allows us to pick up exactly where
we left off with no seeking.
Additionally I drop and regrab the sysfs_mutex around
filldir to avoid a page fault abritrarily increasing the
hold time on the sysfs_mutex.
v2: Returned to using INT_MAX as the EOF condition.
seekdir is ambiguous unless all directory entries have
a unique f_pos value.
Fixes http://bugzilla.kernel.org/show_bug.cgi?id=14949
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adding/Removing a whole array of attributes is very common. Add a standard
utility function to do this with a simple function call, instead of
requiring drivers to open code this.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There is currently a bug in sysfs_sd_setattr inherited from
sysfs_setattr in 2.6.32 where the first time we set the attributes
on a sysfs file we allocate backing store but do not set the
backing store attributes. Resulting in overly restrictive
permissions on sysfs files.
The fix is to simply modify the code so that it always executes
when we update the sysfs attributes, as we did in 2.6.31 and earlier.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Tested-by: Jean Delvare <khali@linux-fr.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Holding locks over device_del -> kobject_del -> sysfs_deactivate can
cause deadlocks if those same locks are grabbed in sysfs show or store
methods.
The I model s_active count + completion as a sleeping read/write lock.
I describe to lockdep sysfs_get_active as a read_trylock,
sysfs_put_active as a read_unlock, and sysfs_deactivate as a
write_lock and write_unlock pair. This seems to capture the essence
for purposes of finding deadlocks, and in my testing gives finds real
issues and ignores non-issues.
This brings us back to holding locks over kobject_del is a problem
that ideally we should find a way of addressing, but at least lockdep
can tell us about the problems instead of requiring developers to debug
rare strange system deadlocks, that happen when sysfs files are removed
while being written to.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many struct bin_attribute descriptors are purely read-only
structures, and there's no need to change them. Therefore
make the promise not to, which will let those descriptors
be put in a ro section.
Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
inode_change_ok already clears the SGID bit when necessary
so there is no reason for sysfs_setattr to carry code to do
the same, and it is good to kill the extra copy because when
I moved the code last in certain corner cases the code will
look at the wrong gid.
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These two functions do 90% of the same work and it doesn't significantly
obfuscate the function to allow both the parent dir and the name to change
at the same time. So merge them together to simplify maintenance, and
increase testing.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
By teaching sysfs_revalidate to hide a dentry for
a sysfs_dirent if the sysfs_dirent has been renamed,
and by teaching sysfs_lookup to return the original
dentry if the sysfs dirent has been renamed. I can
show the results of renames correctly without having to
update the dcache during the directory rename.
This massively simplifies the rename logic allowing a lot
of weird sysfs special cases to be removed along with
a lot of now unnecesary helper code.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
With lazy inode updates and dentry operations bringing everything
into sync on demand there is no longer any need to immediately
update the vfs or grab i_mutex to protect those updates as we
make changes to sysfs.
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that sysfs_getattr and sysfs_permission refresh the vfs
inode there is no need to immediatly push the mode change
into the vfs cache. Reducing the amount of work needed and
simplifying the locking.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
With the implementation of sysfs_getattr and sysfs_permission
sysfs becomes able to lazily propogate inode attribute changes
from the sysfs_dirents to the vfs inodes. This paves the way
for deleting significant chunks of now unnecessary code.
While doing this we did not reference sysfs_setattr from
sysfs_symlink_inode_operations so I added along with
sysfs_getattr and sysfs_permission.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lining up the functions in sysfs_symlink_inode_operations
follows the pattern in the rest of sysfs and makes things
slightly more readable.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Currently sysfs updates the timestamps on the vfs directory
inode when we create or remove a directory entry but doesn't
update the cached copy on the sysfs_dirent, fix that oversight.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cleanly separate the work that is specific to setting the
attributes of a sysfs_dirent from what is needed to update
the attributes of a vfs inode.
Additionally grab the sysfs_mutex to keep any nasties from
surprising us when updating the sysfs_dirent.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The granularity of sysfs time when we keep it is 1 ns. Which
when passed to timestamp_trunc results in a nop. So remove
the unnecessary function call making sysfs_setattr slightly
easier to read.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Currently every caller of sysfs_chmod_file happens at either
file creation time to set a non-default mode or in response
to a specific user requested space change in policy. Making
timestamps of when the chmod happens and notification of
a file changing mode uninteresting.
Remove the unnecessary time stamp and filesystem change
notification, and removes the last of the explicit inotify
and donitfy support from sysfs.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Calling d_drop unconditionally when a sysfs_dirent is deleted has
the potential to leak mounts, so instead implement dentry delete
and revalidate operations that cause sysfs dentries to be removed
at the appropriate time.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Using dentry instead of d in the function name is what
several other filesystems are doing and it seems to be
a more readable convention.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The sysfs_mutex is required to ensure updates are and will remain
atomic with respect to other inode iattr updates, that do not happen
through the filesystem.
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: David P. Quigley <dpquigl@tycho.nsa.gov>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
