It now can have negative value to suppress the message entirely. So it
needs to check it being positive.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170217081742.17417-3-namhyung@kernel.org
[ Adjust fuzz on tools/perf/util/pmu.c, add > 0 checks in many other places ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf report --tui' exits with error when it finds a sample of zero
length symbol (i.e. addr == sym->start == sym->end). Actually these are
valid samples. Don't exit TUI and show report with such symbols.
Reported-and-Tested-by: Anton Blanchard <anton@samba.org>
Link: https://lkml.org/lkml/2016/10/8/189
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@kernel.org # v4.9+
Link: http://lkml.kernel.org/r/1479804050-5028-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If jump target is outside of function range, perf is not handling it
correctly. Especially when target address is lesser than function start
address, target offset will be negative. But, target address declared to
be unsigned, converts negative number into 2's complement. See below
example. Here target of 'jumpq' instruction at 34cf8 is 34ac0 which is
lesser than function start address(34cf0).
34ac0 - 34cf0 = -0x230 = 0xfffffffffffffdd0
Objdump output:
0000000000034cf0 <__sigaction>:
__GI___sigaction():
34cf0: lea -0x20(%rdi),%eax
34cf3: cmp -bashx1,%eax
34cf6: jbe 34d00 <__sigaction+0x10>
34cf8: jmpq 34ac0 <__GI___libc_sigaction>
34cfd: nopl (%rax)
34d00: mov 0x386161(%rip),%rax # 3bae68 <_DYNAMIC+0x2e8>
34d07: movl -bashx16,%fs:(%rax)
34d0e: mov -bashxffffffff,%eax
34d13: retq
perf annotate before applying patch:
__GI___sigaction /usr/lib64/libc-2.22.so
lea -0x20(%rdi),%eax
cmp -bashx1,%eax
v jbe 10
v jmpq fffffffffffffdd0
nop
10: mov _DYNAMIC+0x2e8,%rax
movl -bashx16,%fs:(%rax)
mov -bashxffffffff,%eax
retq
perf annotate after applying patch:
__GI___sigaction /usr/lib64/libc-2.22.so
lea -0x20(%rdi),%eax
cmp -bashx1,%eax
v jbe 10
^ jmpq 34ac0 <__GI___libc_sigaction>
nop
10: mov _DYNAMIC+0x2e8,%rax
movl -bashx16,%fs:(%rax)
mov -bashxffffffff,%eax
retq
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1480953407-7605-3-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Architectures like PowerPC have jump instructions that includes a target
address as a second operand. For example, 'bne cr7,0xc0000000000f6154'.
Add support for such instruction in perf annotate.
objdump o/p:
c0000000000f6140: ld r9,1032(r31)
c0000000000f6144: cmpdi cr7,r9,0
c0000000000f6148: bne cr7,0xc0000000000f6154
c0000000000f614c: ld r9,2312(r30)
c0000000000f6150: std r9,1032(r31)
c0000000000f6154: ld r9,88(r31)
Corresponding perf annotate o/p:
Before patch:
ld r9,1032(r31)
cmpdi cr7,r9,0
v bne 3ffffffffff09f2c
ld r9,2312(r30)
std r9,1032(r31)
74: ld r9,88(r31)
After patch:
ld r9,1032(r31)
cmpdi cr7,r9,0
v bne 74
ld r9,2312(r30)
std r9,1032(r31)
74: ld r9,88(r31)
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1480953407-7605-2-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Presume neglected in commit 786c1b5 "perf annotate: Start supporting
cross arch annotation". This doesn't fix a bug since none of the
affected arches support parsing dec/inc instructions yet.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Ryder <chris.ryder@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20161130092333.1cca5dd2c77e1790d61c1e9c@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By using arch->init() to set up some regular expressions to associate
ins_ops to ARM instructions, ditching that old table that has
instructions not present on ARM.
Take advantage of having an arch->init() to hide more arm specific stuff
from the common code, like the objdump details.
The regular expressions comes from a patch written by Kim Phillips.
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-77m7lufz9ajjimkrebtg5ead@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arches like ARM will want to use regular expressions when deciding what
instructions to associate with what ins_ops, provide infrastructure for
that.
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-7dmnk9el2ipu3nxog092k9z5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some arches may want to dynamically populate the table using regular
expressions on the instruction names to associate them with a set of
parsing/formatting/etc functions (struct ins_ops), so provide a fallback
for when the ins__find() method fails.
That fall back will be able to resize the arch->instructions, setting
arch->nr_instructions appropriately, helper functions to associate an
ins_ops to an instruction name, growing the arch->instructions if needed
and resorting it are provided, all the arch specific callback needs to
do is to decide if the missing instruction should be added to
arch->instructions with a ins_ops association.
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-auu13yradxf7g5dgtpnzt97a@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The disasm_line::name field is always equal to ins::name, being used
just to locate the instruction's ins_ops from the per-arch instructions
table.
Eliminate this duplication, nuking that field and instead make
ins__find() return an ins_ops, store it in disasm_line::ins.ops, and
keep just in disasm_line::ins.name what was in disasm_line::name, this
way we end up not keeping a reference to entries in the per-arch
instructions table.
This in turn will help supporting multiple ways to manage the per-arch
instructions table, allowing resorting that array, for instance, when
the entries will move after references to its addresses were made. The
same problem is avoided when one grows the array with realloc.
So architectures simply keeping a constant array will work as well as
architectures building the table using regular expressions or other
logic that involves resorting the table.
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vr899azvabnw9gtuepuqfd9t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Another step in supporting cross annotation.
The arch specific tables are put in:
tools/perf/arch/$ARCH/annotation/instructions.c
which, so far, just plug instructions to a bunch of parsers/formatters,
but may have more as the need arises.
This is an alternative implementation to a previous attempt made by Ravi
Bangoria.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-g3wt282lfa51j4qd0813e3az@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is to cope with an ARM specific kludge introduced in the original
patch supporting ARM annotation, cfef25b8da ("perf annotate: ARM
support") that made functions with a '+' in its name to be skipped when
processing call instructions.
With this patchkit it should be possible to collect a perf.data file on
a ARM machine and then annotate it on a x86 workstation and have those
ARM kludges used.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2fi3sy7q3sssdi7m7cbe07gy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a 'struct arch', where arch specific stuff will live, starting
with objdump's choice of comment delimitation character, that is '#' in
x86 while a ';' in arm.
This has some bits and pieces from a patch submitted by Ravi.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-f337tzjjcl8vtapgvjxmhrbx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before this patch the '_raw_spin_lock_irqsave' and 'update_rq_clock' operands
were appearing just as hexadecimal numbers:
update_blocked_averages /proc/kcore
│ push %r12
│ push %rbx
│ and $0xfffffffffffffff0,%rsp
│ sub $0x40,%rsp
│ add -0x662cac00(,%rdi,8),%rax
│ mov %rax,%rbx
│ mov %rax,%rdi
│ mov %rax,0x38(%rsp)
│ → callq _raw_spin_lock_irqsave
│ mov %rbx,%rdi
│ mov %rax,0x30(%rsp)
│ → callq update_rq_clock
│ mov 0x8d0(%rbx),%rax
│ lea 0x8d0(%rbx),%r11
To check that all is right one can always use the 'o' hotkey and see
the original objdump -dS output, that for this case is:
update_blocked_averages /proc/kcore
│ffffffff990d5489: push %r12
│ffffffff990d548b: push %rbx
│ffffffff990d548c: and $0xfffffffffffffff0,%rsp
│ffffffff990d5490: sub $0x40,%rsp
│ffffffff990d5494: add -0x662cac00(,%rdi,8),%rax
│ffffffff990d549c: mov %rax,%rbx
│ffffffff990d549f: mov %rax,%rdi
│ffffffff990d54a2: mov %rax,0x38(%rsp)
│ffffffff990d54a7: → callq 0xffffffff997eb7a0
│ffffffff990d54ac: mov %rbx,%rdi
│ffffffff990d54af: mov %rax,0x30(%rsp)
│ffffffff990d54b4: → callq 0xffffffff990c7720
│ffffffff990d54b9: mov 0x8d0(%rbx),%rax
│ffffffff990d54c0: lea 0x8d0(%rbx),%r11
Use the 'h' hotkey to see a list of available hotkeys.
More work needed to cover operands for other instructions, such as 'mov',
that can resolve variable names, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xqgtw9mzmzcjgwkis9kiiv1p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that things like:
→ callq 0xffffffff993e3230
found while disassembling /proc/kcore can be beautified by later
patches, that will resolve that address to a function, looking it up in
/proc/kallsyms.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-p76myuke4j7gplg54amaklxk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do not ignore call instruction with indirect target when its already
identified as a call. This is an extension of commit e8ea156195 ("perf
annotate: Use raw form for register indirect call instructions") to
generalize annotation for all instructions with indirect calls.
This is needed for certain powerpc call instructions that use address in
a register (such as bctrl, btarl, ...).
Apart from that, when kcore is used to disassemble function, all call
instructions were ignored. This patch will fix it as a side effect by
not ignoring them. For example,
Before (with kcore):
mov %r13,%rdi
callq 0xffffffff811a7e70
^ jmpq 64
mov %gs:0x7ef41a6e(%rip),%al
After (with kcore):
mov %r13,%rdi
> callq 0xffffffff811a7e70
^ jmpq 64
mov %gs:0x7ef41a6e(%rip),%al
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
[Suggested about 'bctrl' instruction]
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1471611578-11255-5-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I wanted to know the hottest path through a function and figured the
branch-stack (LBR) information should be able to help out with that.
The below uses the branch-stack to create basic blocks and generate
statistics from them.
from to branch_i
* ----> *
|
| block
v
* ----> *
from to branch_i+1
The blocks are broken down into non-overlapping ranges, while tracking
if the start of each range is an entry point and/or the end of a range
is a branch.
Each block iterates all ranges it covers (while splitting where required
to exactly match the block) and increments the 'coverage' count.
For the range including the branch we increment the taken counter, as
well as the pred counter if flags.predicted.
Using these number we can find if an instruction:
- had coverage; given by:
br->coverage / br->sym->max_coverage
This metric ensures each symbol has a 100% spot, which reflects the
observation that each symbol must have a most covered/hottest
block.
- is a branch target: br->is_target && br->start == add
- for targets, how much of a branch's coverages comes from it:
target->entry / branch->coverage
- is a branch: br->is_branch && br->end == addr
- for branches, how often it was taken:
br->taken / br->coverage
after all, all execution that didn't take the branch would have
incremented the coverage and continued onward to a later branch.
- for branches, how often it was predicted:
br->pred / br->taken
The coverage percentage is used to color the address and asm sections;
for low (<1%) coverage we use NORMAL (uncolored), indicating that these
instructions are not 'important'. For high coverage (>75%) we color the
address RED.
For each branch, we add an asm comment after the instruction with
information on how often it was taken and predicted.
Output looks like (sans color, which does loose a lot of the
information :/)
$ perf record --branch-filter u,any -e cycles:p ./branches 27
$ perf annotate branches
Percent | Source code & Disassembly of branches for cycles:pu (217 samples)
---------------------------------------------------------------------------------
: branches():
0.00 : 40057a: push %rbp
0.00 : 40057b: mov %rsp,%rbp
0.00 : 40057e: sub $0x20,%rsp
0.00 : 400582: mov %rdi,-0x18(%rbp)
0.00 : 400586: mov %rsi,-0x20(%rbp)
0.00 : 40058a: mov -0x18(%rbp),%rax
0.00 : 40058e: mov %rax,-0x10(%rbp)
0.00 : 400592: movq $0x0,-0x8(%rbp)
0.00 : 40059a: jmpq 400656 <branches+0xdc>
1.84 : 40059f: mov -0x10(%rbp),%rax # +100.00%
3.23 : 4005a3: and $0x1,%eax
1.84 : 4005a6: test %rax,%rax
0.00 : 4005a9: je 4005bf <branches+0x45> # -54.50% (p:42.00%)
0.46 : 4005ab: mov 0x200bbe(%rip),%rax # 601170 <acc>
12.90 : 4005b2: add $0x1,%rax
2.30 : 4005b6: mov %rax,0x200bb3(%rip) # 601170 <acc>
0.46 : 4005bd: jmp 4005d1 <branches+0x57> # -100.00% (p:100.00%)
0.92 : 4005bf: mov 0x200baa(%rip),%rax # 601170 <acc> # +49.54%
13.82 : 4005c6: sub $0x1,%rax
0.46 : 4005ca: mov %rax,0x200b9f(%rip) # 601170 <acc>
2.30 : 4005d1: mov -0x10(%rbp),%rax # +50.46%
0.46 : 4005d5: mov %rax,%rdi
0.46 : 4005d8: callq 400526 <lfsr> # -100.00% (p:100.00%)
0.00 : 4005dd: mov %rax,-0x10(%rbp) # +100.00%
0.92 : 4005e1: mov -0x18(%rbp),%rax
0.00 : 4005e5: and $0x1,%eax
0.00 : 4005e8: test %rax,%rax
0.00 : 4005eb: je 4005ff <branches+0x85> # -100.00% (p:100.00%)
0.00 : 4005ed: mov 0x200b7c(%rip),%rax # 601170 <acc>
0.00 : 4005f4: shr $0x2,%rax
0.00 : 4005f8: mov %rax,0x200b71(%rip) # 601170 <acc>
0.00 : 4005ff: mov -0x10(%rbp),%rax # +100.00%
7.37 : 400603: and $0x1,%eax
3.69 : 400606: test %rax,%rax
0.00 : 400609: jne 400612 <branches+0x98> # -59.25% (p:42.99%)
1.84 : 40060b: mov $0x1,%eax
14.29 : 400610: jmp 400617 <branches+0x9d> # -100.00% (p:100.00%)
1.38 : 400612: mov $0x0,%eax # +57.65%
10.14 : 400617: test %al,%al # +42.35%
0.00 : 400619: je 40062f <branches+0xb5> # -57.65% (p:100.00%)
0.46 : 40061b: mov 0x200b4e(%rip),%rax # 601170 <acc>
2.76 : 400622: sub $0x1,%rax
0.00 : 400626: mov %rax,0x200b43(%rip) # 601170 <acc>
0.46 : 40062d: jmp 400641 <branches+0xc7> # -100.00% (p:100.00%)
0.92 : 40062f: mov 0x200b3a(%rip),%rax # 601170 <acc> # +56.13%
2.30 : 400636: add $0x1,%rax
0.92 : 40063a: mov %rax,0x200b2f(%rip) # 601170 <acc>
0.92 : 400641: mov -0x10(%rbp),%rax # +43.87%
2.30 : 400645: mov %rax,%rdi
0.00 : 400648: callq 400526 <lfsr> # -100.00% (p:100.00%)
0.00 : 40064d: mov %rax,-0x10(%rbp) # +100.00%
1.84 : 400651: addq $0x1,-0x8(%rbp)
0.92 : 400656: mov -0x8(%rbp),%rax
5.07 : 40065a: cmp -0x20(%rbp),%rax
0.00 : 40065e: jb 40059f <branches+0x25> # -100.00% (p:100.00%)
0.00 : 400664: nop
0.00 : 400665: leaveq
0.00 : 400666: retq
(Note: the --branch-filter u,any was used to avoid spurious target and
branch points due to interrupts/faults, they show up as very small -/+
annotations on 'weird' locations)
Committer note:
Please take a look at:
http://vger.kernel.org/~acme/perf/annotate_basic_blocks.png
To see the colors.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
[ Moved sym->max_coverage to 'struct annotate', aka symbol__annotate(sym) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We're not using it anymore, few users were, but we really could do
without it, simplify lots of functions by removing it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1zng8wdznn00iiz08bb7q3vn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to initializa some fields (right now just a mutex) when we
allocate the per symbol annotation struct, so do it at the symbol
constructor instead of (ab)using the filter mechanism for that.
This way we remove one of the few cases we have for that symbol filter,
which will eventually led to removing it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-cvz34avlz1lez888lob95390@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Disentangling this a bit further, more to come.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-7bjv2xazuyzs0xw01mlwosn5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Lots of changes to support kcore, compressed modules, build-id files
left us with some spaguetti code, simplify it a bit, more to come.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-h70p7x451li3f2fhs44vzmm8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We don't need to do all that filename logic to then just have to test
something unrelated and bail out, move it to the start of the function.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lk1v4srtsktonnyp6t1o0uhx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If dso__build_id_filename(..., NULL, ...) returns !NULL its because it
allocated it, so, when reaching the 'if (dso__is_kcore()) test, we
already checked that and were just "fallbacking" to using
dso->long_name, but without freeing filename, thus leaking it.
Fix it by adding the dso__is_kcore() test to the 'or' group just after
it, the one containing the full fallback code, including freeing the
filename.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: ee205503f2 ("perf tools: Fix annotation with kcore")
Link: http://lkml.kernel.org/n/tip-qi4rpjq8yo6myvg99kkgt0xz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were just using pr_error() which makes it difficult for non stdio UIs
to provide errors using its widgets, as they need to somehow catch what
was passed to pr_error().
Fix it by introducing a __strerror() interface like the ones used
elsewhere, for instance target__strerror().
This is just the initial step, more work will be done, but first some
error handling bugs noticed while working on this need to be dealt with.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dgd22zl2xg7x4vcnoa83jxfb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This function will not annotate anything, it will just disassembly the
given map->dso and symbol.
It currently does this by parsing the output of 'objdump --disassemble',
but this could conceivably be done using a library or an offshot of
the kernel's instruction decoder (arch/x86/lib/inat.c), etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2xpfl4bfnrd6x584b390qok7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will need to redirect the stderr as well, so open code popen as
a starting point.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-k0zt9svg4bswiglem7ornts4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Staring at annotations of large functions is useless if there's only a
few samples in them. Report the number of samples in the header to make
this easier to determine.
Committer note:
The change amounts to:
- Percent | Source code & Disassembly of perf-vdso.so for cycles:u
------------------------------------------------------------------
+ Percent | Source code & Disassembly of perf-vdso.so for cycles:u (3278 samples)
+--------------------------------------------------------------------------------
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20160630082955.GA30921@twins.programming.kicks-ass.net
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No need to use strlen, etc to figure that out, just use the return from
printf(), it will tell how wide the following line needs to be.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20160630082955.GA30921@twins.programming.kicks-ass.net
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce helper to detect 'ret' instructions and use the same in the TUI.
A helper is needed since some architectures such as powerpc have more
than one return instruction.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/1466769240-12376-5-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
hist_entry__annotate looks part of API but I don't find any caller
of this function. Removing it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/1466769240-12376-2-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the list of instructions recognised by perf annotate has to be
explicitly written in sorted order. This makes it easy to make mistakes
when adding new instructions. Sort the list of instructions on first
access.
Signed-off-by: Chris Ryder <chris.ryder@arm.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/4268febaf32f47f322c166fb2fe98cfec7041e11.1463676839.git.chris.ryder@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ARM blt and bls instructions are not correctly identified when
parsing assembly because the list of recognised instructions must be
sorted by name. Swap the ordering of blt and bls.
Signed-off-by: Chris Ryder <chris.ryder@arm.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/560e196b7c79b7ff853caae13d8719a31479cb1a.1463676839.git.chris.ryder@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of using a raw string, use DSO__NAME_KALLSYMS and
DSO__NAME_KCORE macros for kallsyms and kcore.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160515031935.4017.50971.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the existing SBUILD_ID_SIZE macro instead of the equivalent
BUILD_ID_SIZE * 2 + 1 expression for allocating a buffer for build-id
strings.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160511135159.23943.57120.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now we have sort dimensions private for struct hists, we need to make
dimension booleans hists specific as well.
Moving sort__has_sym into struct perf_hpp_list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1462276488-26683-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add basic support to parse ARM assembly.
This:
* enables perf to correctly show the disassembly, rather than chopping
some constants off at the '#' (which is not a comment character on
ARM).
* allows perf to identify ARM instructions that branch to other parts
within the same function, thereby properly annotating them.
* allows perf to identify function calls, allowing called functions to
be followed in the annotated view.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/n/tip-owp1uj0nmcgfrlppfyeetuyf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --full-paths option did not show the full source file paths in the 'perf
annotate' tool, because the value of the option was not propagated into the
related functions.
With this patch the value of the --full-paths option is known to the function
that composes the srcline string, so it prints the full path when necessary.
Committer Note:
This affects annotate when the --print-line option is used:
# perf annotate -h 2>&1 | grep print-line
-l, --print-line print matching source lines (may be slow)
Looking just at the lines that should be affected by this change:
Before:
# perf annotate --print-line --full-paths --stdio fput | grep '\.[ch]:[0-9]\+'
94.44 atomic64_64.h:114
5.56 file_table.c:265
file_table.c:265 5.56 : ffffffff81219a00: callq ffffffff81769360 <__fentry__>
atomic64_64.h:114 94.44 : ffffffff81219a05: lock decq 0x38(%rdi)
After:
# perf annotate --print-line --full-paths --stdio fput | grep '\.[ch]:[0-9]\+'
94.44 /home/git/linux/arch/x86/include/asm/atomic64_64.h:114
5.56 /home/git/linux/fs/file_table.c:265
/home/git/linux/fs/file_table.c:265 5.56 : ffffffff81219a00: callq ffffffff81769360 <__fentry__>
/home/git/linux/arch/x86/include/asm/atomic64_64.h:114 94.44 : ffffffff81219a05: lock decq 0x38(%rdi)
#
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://permalink.gmane.org/gmane.linux.kernel.perf.user/2365
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the browser fails to annotate it is difficult for users to find out
what went wrong.
Add some errors for objdump failures that are displayed in the UI.
Note it would be even better to handle these errors smarter, like
falling back to the binary when the debug info is somehow corrupted. But
for now just giving a better error is an improvement.
Committer note:
This works for --stdio, where errors just scroll by the screen:
# perf annotate --stdio intel_idle
Failure running objdump --start-address=0xffffffff81418290 --stop-address=0xffffffff814183ae -l -d --no-show-raw -S -C /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 2>/dev/null|grep -v /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1|expand
Percent | Source code & Disassembly of vmlinux for cycles:pp
------------------------------------------------------------------
And with that one can use that command line to try to find out more about what
happened instead of getting a blank screen, an improvement.
We need tho to improve this further to get it to work with other UIs, like
--tui and --gtk, where it continues showing a blank screen, no messages, as
the pr_err() used is enough just for --stdio.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1446779167-18949-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "/proc/kcore requires CAP_SYS_RAWIO" message comes up all the time
for 'perf script' if vmlinux is not found and the user isn't root, even
when the kernel is not being traced and even though the message is only
really relevant for annotation.
Change it to pr_debug and instead put a note in the message displayed if
annotation is not possible.
Also, the file being accessed might not be /proc/kcore. Tools can be
directed to a different location using the --kallsyms option in which
case kcore is expected to be in the same directory. Adjust the message
so it is not misleading in that case.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1440065260-8802-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix the following 32-bit compilation errors:
util/annotate.c: In function ‘addr_map_symbol__account_cycles’:
util/annotate.c:643:3: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘u64’ [-Werror=format=]
pr_debug2("BB with bad start: addr %lx start %lx sym %lx saddr %lx\n",
^
util/annotate.c:643:3: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘u64’ [-Werror=format=]
util/annotate.c:643:3: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 6 has type ‘u64’ [-Werror=format=]
These were introduced by the patch:
"perf report: Add infrastructure for a cycles histogram"
Also change the 'saddr' variable from 'unsigned long' to 'u64'
noting that theoretically we could be processing data captured
on a 64-bit machine but processing it on a 32-bit machine.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: d4957633bf ("perf report: Add infrastructure for a cycles histogram")
Link: http://lkml.kernel.org/r/1439536294-18241-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds the basic infrastructure to keep track of cycle counts per
basic block for annotate. We allocate an array similar to the normal
accounting, and then account branch cycles there.
We handle two cases:
cycles per basic block with start and cycles per branch (these are later
used for either IPC or just cycles per BB)
In the start case we cannot handle overlaps, so always the longest basic
block wins.
For the cycles per branch case everything is accurately accounted.
v2: Remove unnecessary checks. Slight restructure. Move
symbol__get_annotation to another patch. Move histogram allocation.
v3: Merged with current tree
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-4-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To better reflect the purpose of this struct, that is to hold
info about samples, its total number and is percentage.
Cc: Martin Liska <mliska@suse.cz>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-6bf8gwcl975uurl0ttpvtk69@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To compare two records on an instruction base, with --show-total-period
option provided, display total number of samples that belong to a line
in assembly language.
New hot key 't' is introduced for 'perf annotate' TUI.
Signed-off-by: Martin Liska <mliska@suse.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/5583E26D.1040407@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new utility function to get an function annotation out of existing
code.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1432749114-904-4-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When annotating source/disasm lines the perf tools parse the output of
objdump, trying to provide augmented output that allows navigating
jumps, calls, etc.
But when a line output by objdump can't be parsed the annotation code
falls back to just presenting the unparsed line.
When fixing a leak in the 0fb9f2aab7 commit ("perf annotate: Fix
memory leaks in LOCK handling") we failed to take that into account and
instead tried to free one of the data structures that should be freed
only when successfully allocated, oops, segfault.
There was a change in the way the objdump output for lock prefixed
instructions is formatted that lead the relevant parser to fail to grok
it.
At least RHEL7 works ok, but Fedora 20 segfaults.
Fix it by making the ins__delete() destructor work like the most basic
destructor: free().
Namely make it accept a NULL pointer and when handling it just do
nothing.
Further investigation is needed to figure out the nature of the objdump
output change so as to make the parser grok it.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabin@rab.in>
Link: http://lkml.kernel.org/n/tip-7wsy0zo292pif0yjoqpfryrz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
