Commit Graph

139 Commits

Author SHA1 Message Date
Vladimir Davydov
d86133bd39 pipe: account to kmemcg
Pipes can consume a significant amount of system memory, hence they
should be accounted to kmemcg.

This patch marks pipe_inode_info and anonymous pipe buffer page
allocations as __GFP_ACCOUNT so that they would be charged to kmemcg.
Note, since a pipe buffer page can be "stolen" and get reused for other
purposes, including mapping to userspace, we clear PageKmemcg thus
resetting page->_mapcount and uncharge it in anon_pipe_buf_steal, which
is introduced by this patch.

A note regarding anon_pipe_buf_steal implementation.  We allow to steal
the page if its ref count equals 1.  It looks racy, but it is correct
for anonymous pipe buffer pages, because:

 - We lock out all other pipe users, because ->steal is called with
   pipe_lock held, so the page can't be spliced to another pipe from
   under us.

 - The page is not on LRU and it never was.

 - Thus a parallel thread can access it only by PFN. Although this is
   quite possible (e.g. see page_idle_get_page and balloon_page_isolate)
   this is not dangerous, because all such functions do is increase page
   ref count, check if the page is the one they are looking for, and
   decrease ref count if it isn't. Since our page is clean except for
   PageKmemcg mark, which doesn't conflict with other _mapcount users,
   the worst that can happen is we see page_count > 2 due to a transient
   ref, in which case we false-positively abort ->steal, which is still
   fine, because ->steal is not guaranteed to succeed.

Link: http://lkml.kernel.org/r/20160527150313.GD26059@esperanza
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 16:19:19 -07:00
Kirill A. Shutemov
09cbfeaf1a mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04 10:41:08 -07:00
Willy Tarreau
759c01142a pipe: limit the per-user amount of pages allocated in pipes
On no-so-small systems, it is possible for a single process to cause an
OOM condition by filling large pipes with data that are never read. A
typical process filling 4000 pipes with 1 MB of data will use 4 GB of
memory. On small systems it may be tricky to set the pipe max size to
prevent this from happening.

This patch makes it possible to enforce a per-user soft limit above
which new pipes will be limited to a single page, effectively limiting
them to 4 kB each, as well as a hard limit above which no new pipes may
be created for this user. This has the effect of protecting the system
against memory abuse without hurting other users, and still allowing
pipes to work correctly though with less data at once.

The limit are controlled by two new sysctls : pipe-user-pages-soft, and
pipe-user-pages-hard. Both may be disabled by setting them to zero. The
default soft limit allows the default number of FDs per process (1024)
to create pipes of the default size (64kB), thus reaching a limit of 64MB
before starting to create only smaller pipes. With 256 processes limited
to 1024 FDs each, this results in 1024*64kB + (256*1024 - 1024) * 4kB =
1084 MB of memory allocated for a user. The hard limit is disabled by
default to avoid breaking existing applications that make intensive use
of pipes (eg: for splicing).

Reported-by: socketpair@gmail.com
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Mitigates: CVE-2013-4312 (Linux 2.0+)
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-19 19:25:21 -05:00
Eric Biggers
6ae0806993 fs/pipe.c: return error code rather than 0 in pipe_write()
pipe_write() would return 0 if it failed to merge the beginning of the
data to write with the last, partially filled pipe buffer.  It should
return an error code instead.  Userspace programs could be confused by
write() returning 0 when called with a nonzero 'count'.

The EFAULT error case was a regression from f0d1bec9d5 ("new helper:
copy_page_from_iter()"), while the ops->confirm() error case was a much
older bug.

Test program:

	#include <assert.h>
	#include <errno.h>
	#include <unistd.h>

	int main(void)
	{
		int fd[2];
		char data[1] = {0};

		assert(0 == pipe(fd));
		assert(1 == write(fd[1], data, 1));

		/* prior to this patch, write() returned 0 here  */
		assert(-1 == write(fd[1], NULL, 1));
		assert(errno == EFAULT);
	}

Cc: stable@vger.kernel.org # at least v3.15+
Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-11 02:18:26 -05:00
Eric Biggers
e9bb1f9b12 fs/pipe.c: preserve alloc_file() error code
If sys_pipe() was unable to allocate a 'struct file', it always failed
with ENFILE, which means "The number of simultaneously open files in the
system would exceed a system-imposed limit." However, alloc_file()
actually returns an ERR_PTR value and might fail with other error codes.
Currently, in addition to ENFILE, it can fail with ENOMEM, potentially
when there are few open files in the system.  Update sys_pipe() to
preserve this error code.

In a prior submission of a similar patch (1) some concern was raised
about introducing a new error code for sys_pipe().  However, for most
system calls, programs cannot assume that new error codes will never be
introduced.  In addition, ENOMEM was, in fact, already a possible error
code for sys_pipe(), in the case where the file descriptor table could
not be expanded due to insufficient memory.

	(1) http://comments.gmane.org/gmane.linux.kernel/1357942

Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-11 02:18:23 -05:00
David Howells
75c3cfa855 VFS: assorted weird filesystems: d_inode() annotations
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15 15:06:58 -04:00
Al Viro
5d5d568975 make new_sync_{read,write}() static
All places outside of core VFS that checked ->read and ->write for being NULL or
called the methods directly are gone now, so NULL {read,write} with non-NULL
{read,write}_iter will do the right thing in all cases.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:29:40 -04:00
Christoph Hellwig
e2e40f2c1e fs: move struct kiocb to fs.h
struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-25 20:28:11 -04:00
Al Viro
f0d1bec9d5 new helper: copy_page_from_iter()
parallel to copy_page_to_iter().  pipe_write() switched to it (and became
->write_iter()).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:39:42 -04:00
Al Viro
fb9096a344 pipe: switch to ->read_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:37:58 -04:00
Al Viro
71d8e532b1 start adding the tag to iov_iter
For now, just use the same thing we pass to ->direct_IO() - it's all
iovec-based at the moment.  Pass it explicitly to iov_iter_init() and
account for kvec vs. iovec in there, by the same kludge NFS ->direct_IO()
uses.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:49 -04:00
Al Viro
637b58c288 switch pipe_read() to copy_page_to_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:22 -04:00
Al Viro
fbb32750a6 pipe: kill ->map() and ->unmap()
all pipe_buffer_operations have the same instances of those...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:19 -04:00
Dmitry Monakhov
7e775f46a1 fs/pipe.c: skip file_update_time on frozen fs
Pipe has no data associated with fs so it is not good idea to block
pipe_write() if FS is frozen, but we can not update file's time on such
filesystem.  Let's use same idea as we use in touch_time().

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=65701

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23 16:37:00 -08:00
Linus Torvalds
b0d8d22921 vfs: fix subtle use-after-free of pipe_inode_info
The pipe code was trying (and failing) to be very careful about freeing
the pipe info only after the last access, with a pattern like:

        spin_lock(&inode->i_lock);
        if (!--pipe->files) {
                inode->i_pipe = NULL;
                kill = 1;
        }
        spin_unlock(&inode->i_lock);
        __pipe_unlock(pipe);
        if (kill)
                free_pipe_info(pipe);

where the final freeing is done last.

HOWEVER.  The above is actually broken, because while the freeing is
done at the end, if we have two racing processes releasing the pipe
inode info, the one that *doesn't* free it will decrement the ->files
count, and unlock the inode i_lock, but then still use the
"pipe_inode_info" afterwards when it does the "__pipe_unlock(pipe)".

This is *very* hard to trigger in practice, since the race window is
very small, and adding debug options seems to just hide it by slowing
things down.

Simon originally reported this way back in July as an Oops in
kmem_cache_allocate due to a single bit corruption (due to the final
"spin_unlock(pipe->mutex.wait_lock)" incrementing a field in a different
allocation that had re-used the free'd pipe-info), it's taken this long
to figure out.

Since the 'pipe->files' accesses aren't even protected by the pipe lock
(we very much use the inode lock for that), the simple solution is to
just drop the pipe lock early.  And since there were two users of this
pattern, create a helper function for it.

Introduced commit ba5bb14733 ("pipe: take allocation and freeing of
pipe_inode_info out of ->i_mutex").

Reported-by: Simon Kirby <sim@hostway.ca>
Reported-by: Ian Applegate <ia@cloudflare.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org   # v3.10+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-02 09:44:51 -08:00
Kent Overstreet
a27bb332c0 aio: don't include aio.h in sched.h
Faster kernel compiles by way of fewer unnecessary includes.

[akpm@linux-foundation.org: fix fallout]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Kent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07 20:16:25 -07:00
Al Viro
4b8a8f1e4f get rid of the last free_pipe_info() callers
and rename __free_pipe_info() to free_pipe_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:13:02 -04:00
Al Viro
7bee130e22 get rid of alloc_pipe_info() argument
not used anymore

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:13:01 -04:00
Al Viro
6447a3cf19 get rid of pipe->inode
it's used only as a flag to distinguish normal pipes/FIFOs from the
internal per-task one used by file-to-file splice.  And pipe->files
would work just as well for that purpose...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:13:01 -04:00
Al Viro
ebec73f475 introduce variants of pipe_lock/pipe_unlock for real pipes/FIFOs
fs/pipe.c file_operations methods *know* that pipe is not an internal one;
no need to check pipe->inode for those callers.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:13:01 -04:00
Al Viro
de32ec4cfe pipe: set file->private_data to ->i_pipe
simplify get_pipe_info(), while we are at it

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:13:00 -04:00
Al Viro
72b0d9aacb pipe: don't use ->i_mutex
now it can be done - put mutex into pipe_inode_info, use it instead
of ->i_mutex

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:13:00 -04:00
Al Viro
ba5bb14733 pipe: take allocation and freeing of pipe_inode_info out of ->i_mutex
* new field - pipe->files; number of struct file over that pipe (all
  sharing the same inode, of course); protected by inode->i_lock.
* pipe_release() decrements pipe->files, clears inode->i_pipe when
  if the counter has reached 0 (all under ->i_lock) and, in that case,
  frees pipe after having done pipe_unlock()
* fifo_open() starts with grabbing ->i_lock, and either bumps pipe->files
  if ->i_pipe was non-NULL or allocates a new pipe (dropping and regaining
  ->i_lock) and rechecks ->i_pipe; if it's still NULL, inserts new pipe
  there, otherwise bumps ->i_pipe->files and frees the one we'd allocated.
  At that point we know that ->i_pipe is non-NULL and won't go away, so
  we can do pipe_lock() on it and proceed as we used to.  If we end up
  failing, decrement pipe->files and if it reaches 0 clear ->i_pipe and
  free the sucker after pipe_unlock().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:12:59 -04:00
Al Viro
18c03cfd40 pipe: preparation to new locking rules
* use the fact that file_inode(file)->i_pipe doesn't change
  while the file is opened - no locks needed to access that.
* switch to pipe_lock/pipe_unlock where it's easy to do

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:12:59 -04:00
Al Viro
fc7478a2bf pipe: switch wait_for_partner() and wake_up_partner() to pipe_inode_info
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:12:59 -04:00
Al Viro
599a0ac14e pipe: fold file_operations instances in one
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:12:58 -04:00
Al Viro
f776c73888 fold fifo.c into pipe.c
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:12:58 -04:00
Al Viro
a930d87905 vfs: fix pipe counter breakage
If you open a pipe for neither read nor write, the pipe code will not
add any usage counters to the pipe, causing the 'struct pipe_inode_info"
to be potentially released early.

That doesn't normally matter, since you cannot actually use the pipe,
but the pipe release code - particularly fasync handling - still expects
the actual pipe infrastructure to all be there.  And rather than adding
NULL pointer checks, let's just disallow this case, the same way we
already do for the named pipe ("fifo") case.

This is ancient going back to pre-2.4 days, and until trinity, nobody
naver noticed.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-12 08:29:17 -07:00
Anatol Pomozov
39b6525274 fs: Preserve error code in get_empty_filp(), part 2
Allocating a file structure in function get_empty_filp() might fail because
of several reasons:
 - not enough memory for file structures
 - operation is not allowed
 - user is over its limit

Currently the function returns NULL in all cases and we loose the exact
reason of the error. All callers of get_empty_filp() assume that the function
can fail with ENFILE only.

Return error through pointer. Change all callers to preserve this error code.

[AV: cleaned up a bit, carved the get_empty_filp() part out into a separate commit
(things remaining here deal with alloc_file()), removed pipe(2) behaviour change]

Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Reviewed-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22 23:31:32 -05:00
Al Viro
496ad9aa8e new helper: file_inode(file)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22 23:31:31 -05:00
Al Viro
5b249b1b07 pipe(2) - race-free error recovery
don't mess with sys_close() if copy_to_user() fails; just postpone
fd_install() until we know it hasn't.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26 21:08:52 -04:00
Linus Torvalds
a0e881b7c1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull second vfs pile from Al Viro:
 "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the
  deadlock reproduced by xfstests 068), symlink and hardlink restriction
  patches, plus assorted cleanups and fixes.

  Note that another fsfreeze deadlock (emergency thaw one) is *not*
  dealt with - the series by Fernando conflicts a lot with Jan's, breaks
  userland ABI (FIFREEZE semantics gets changed) and trades the deadlock
  for massive vfsmount leak; this is going to be handled next cycle.
  There probably will be another pull request, but that stuff won't be
  in it."

Fix up trivial conflicts due to unrelated changes next to each other in
drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c}

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
  delousing target_core_file a bit
  Documentation: Correct s_umount state for freeze_fs/unfreeze_fs
  fs: Remove old freezing mechanism
  ext2: Implement freezing
  btrfs: Convert to new freezing mechanism
  nilfs2: Convert to new freezing mechanism
  ntfs: Convert to new freezing mechanism
  fuse: Convert to new freezing mechanism
  gfs2: Convert to new freezing mechanism
  ocfs2: Convert to new freezing mechanism
  xfs: Convert to new freezing code
  ext4: Convert to new freezing mechanism
  fs: Protect write paths by sb_start_write - sb_end_write
  fs: Skip atime update on frozen filesystem
  fs: Add freezing handling to mnt_want_write() / mnt_drop_write()
  fs: Improve filesystem freezing handling
  switch the protection of percpu_counter list to spinlock
  nfsd: Push mnt_want_write() outside of i_mutex
  btrfs: Push mnt_want_write() outside of i_mutex
  fat: Push mnt_want_write() outside of i_mutex
  ...
2012-08-01 10:26:23 -07:00
Al Viro
e4fad8e5d2 consolidate pipe file creation
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-29 21:24:19 +04:00
Cong Wang
2164d33446 pipe: remove KM_USER0 from comments
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-07-24 15:27:34 +08:00
Josef Bacik
c3b2da3148 fs: introduce inode operation ->update_time
Btrfs has to make sure we have space to allocate new blocks in order to modify
the inode, so updating time can fail.  We've gotten around this by having our
own file_update_time but this is kind of a pain, and Christoph has indicated he
would like to make xfs do something different with atime updates.  So introduce
->update_time, where we will deal with i_version an a/m/c time updates and
indicate which changes need to be made.  The normal version just does what it
has always done, updates the time and marks the inode dirty, and then
filesystems can choose to do something different.

I've gone through all of the users of file_update_time and made them check for
errors with the exception of the fault code since it's complicated and I wasn't
quite sure what to do there, also Jan is going to be pushing the file time
updates into page_mkwrite for those who have it so that should satisfy btrfs and
make it not a big deal to check the file_update_time() return code in the
generic fault path. Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2012-06-01 12:07:25 -04:00
Will Deacon
46ce341b2f pipe: return -ENOIOCTLCMD instead of -EINVAL on unknown ioctl command
As described in commit 07d106d0a ("vfs: fix up ENOIOCTLCMD error
handling"), drivers should return -ENOIOCTLCMD if they receive an ioctl
command which they don't understand. Doing so will result in -ENOTTY
being returned to userspace, which matches the behaviour of the compat
layer if it fails to translate an ioctl command.

This patch fixes the pipe ioctl to return -ENOIOCTLCMD instead of
-EINVAL when passed an unknown ioctl command.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30 21:04:55 -04:00
Linus Torvalds
9883035ae7 pipes: add a "packetized pipe" mode for writing
The actual internal pipe implementation is already really about
individual packets (called "pipe buffers"), and this simply exposes that
as a special packetized mode.

When we are in the packetized mode (marked by O_DIRECT as suggested by
Alan Cox), a write() on a pipe will not merge the new data with previous
writes, so each write will get a pipe buffer of its own.  The pipe
buffer is then marked with the PIPE_BUF_FLAG_PACKET flag, which in turn
will tell the reader side to break the read at that boundary (and throw
away any partial packet contents that do not fit in the read buffer).

End result: as long as you do writes less than PIPE_BUF in size (so that
the pipe doesn't have to split them up), you can now treat the pipe as a
packet interface, where each read() system call will read one packet at
a time.  You can just use a sufficiently big read buffer (PIPE_BUF is
sufficient, since bigger than that doesn't guarantee atomicity anyway),
and the return value of the read() will naturally give you the size of
the packet.

NOTE! We do not support zero-sized packets, and zero-sized reads and
writes to a pipe continue to be no-ops.  Also note that big packets will
currently be split at write time, but that the size at which that
happens is not really specified (except that it's bigger than PIPE_BUF).
Currently that limit is the system page size, but we might want to
explicitly support bigger packets some day.

The main user for this is going to be the autofs packet interface,
allowing us to stop having to care so deeply about exact packet sizes
(which have had bugs with 32/64-bit compatibility modes).  But user
space can create packetized pipes with "pipe2(fd, O_DIRECT)", which will
fail with an EINVAL on kernels that do not support this interface.

Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: David Miller <davem@davemloft.net>
Cc: Ian Kent <raven@themaw.net>
Cc: Thomas Meyer <thomas@m3y3r.de>
Cc: stable@kernel.org  # needed for systemd/autofs interaction fix
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-29 13:12:42 -07:00
Muthu Kumar
b502bd1152 magic.h: move some FS magic numbers into magic.h
- Move open-coded filesystem magic numbers into magic.h

- Rearrange magic.h so that the filesystem-related constants are grouped
  together.

Signed-off-by: Muthukumar R <muthur@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:31 -07:00
Cong Wang
e8e3c3d66f fs: remove the second argument of k[un]map_atomic()
Acked-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20 21:48:21 +08:00
Sasha Levin
2ccd4f4d47 pipe: fail cleanly when root tries F_SETPIPE_SZ with big size
When a user with the CAP_SYS_RESOURCE cap tries to F_SETPIPE_SZ a pipe
with size bigger than kmalloc() can alloc it spits out an ugly warning:

  ------------[ cut here ]------------
  WARNING: at mm/page_alloc.c:2095 __alloc_pages_nodemask+0x5d3/0x7a0()
  Pid: 733, comm: a.out Not tainted 3.2.0-rc1+ #4
  Call Trace:
     warn_slowpath_common+0x75/0xb0
     warn_slowpath_null+0x15/0x20
     __alloc_pages_nodemask+0x5d3/0x7a0
     __get_free_pages+0x12/0x50
     __kmalloc+0x12b/0x150
     pipe_set_size+0x75/0x120
     pipe_fcntl+0xf8/0x140
     do_fcntl+0x2d4/0x410
     sys_fcntl+0x66/0xa0
     system_call_fastpath+0x16/0x1b
  ---[ end trace 432f702e6db7b5ee ]---

Instead, make kcalloc() handle the overflow case and fail quietly.

[akpm@linux-foundation.org: switch to sizeof(*bufs) for 80-column niceness]
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Acked-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:04 -08:00
Al Viro
84b92d39f9 vfs: pipe.c is really non-modular
... so no exitcalls there.  Not much would work if pipe(2) would stop
working, after all...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:52:41 -05:00
Pavel Emelyanov
d70ef97baf fs/pipe.c: add ->statfs callback for pipefs
Currently a statfs on a pipe's /proc/<pid>/fd/ link returns -ENOSYS.  Wire
pipfs up so that the statfs succeeds.

This is required by checkpoint-restart in the userspace to make it
possible to distinguish pipes from fifos.

When we dump information about task's open files we use the /proc/pid/fd
directoy's symlinks and the fact that opening any of them gives us exactly
the same dentry->inode pair as the original process has.  Now if a task
we're dumping has opened pipe and fifo we need to detect this and act
accordingly.  Knowing that an fd with type S_ISFIFO resides on a pipefs is
the most precise way.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:51 -07:00
Eric Dumazet
a209dfc7b0 vfs: dont chain pipe/anon/socket on superblock s_inodes list
Workloads using pipes and sockets hit inode_sb_list_lock contention.

superblock s_inodes list is needed for quota, dirty, pagecache and
fsnotify management. pipe/anon/socket fs are clearly not candidates for
these.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-26 12:57:09 -04:00
Tim Chen
423e0ab086 VFS : mount lock scalability for internal mounts
For a number of file systems that don't have a mount point (e.g. sockfs
and pipefs), they are not marked as long term. Therefore in
mntput_no_expire, all locks in vfs_mount lock are taken instead of just
local cpu's lock to aggregate reference counts when we release
reference to file objects.  In fact, only local lock need to have been
taken to update ref counts as these file systems are in no danger of
going away until we are ready to unregister them.

The attached patch marks file systems using kern_mount without
mount point as long term.  The contentions of vfs_mount lock
is now eliminated.  Before un-registering such file system,
kern_unmount should be called to remove the long term flag and
make the mount point ready to be freed.

Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-24 10:08:32 -04:00
Linus Torvalds
28e58ee8ce Fix broken "pipe: use event aware wakeups" optimization
Commit e462c448fd ("pipe: use event aware wakeups") optimized the pipe
event wakeup calls to avoid wakeups if the events do not match the
requested set.

However, the optimization was buggy, in that it didn't actually use the
correct sets for the events: when we make room for more data to be
written, the pipe poll() routine will return both the POLLOUT _and_
POLLWRNORM bits.  Similarly for read.

And most critically, when a pipe is released, that will potentially
result in POLLHUP|POLLERR (depending on whether it was the last reader
or writer), not just the regular POLLIN|POLLOUT.

This bug showed itself as a hung gnome-screensaver-dialog process, stuck
forever (or at least until it was poked by a signal or by being traced)
in a poll() system call.

Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 16:21:59 -08:00
Al Viro
f03c65993b sanitize vfsmount refcounting changes
Instead of splitting refcount between (per-cpu) mnt_count
and (SMP-only) mnt_longrefs, make all references contribute
to mnt_count again and keep track of how many are longterm
ones.

Accounting rules for longterm count:
	* 1 for each fs_struct.root.mnt
	* 1 for each fs_struct.pwd.mnt
	* 1 for having non-NULL ->mnt_ns
	* decrement to 0 happens only under vfsmount lock exclusive

That allows nice common case for mntput() - since we can't drop the
final reference until after mnt_longterm has reached 0 due to the rules
above, mntput() can grab vfsmount lock shared and check mnt_longterm.
If it turns out to be non-zero (which is the common case), we know
that this is not the final mntput() and can just blindly decrement
percpu mnt_count.  Otherwise we grab vfsmount lock exclusive and
do usual decrement-and-check of percpu mnt_count.

For fs_struct.c we have mnt_make_longterm() and mnt_make_shortterm();
namespace.c uses the latter in places where we don't already hold
vfsmount lock exclusive and opencodes a few remaining spots where
we need to manipulate mnt_longterm.

Note that we mostly revert the code outside of fs/namespace.c back
to what we used to have; in particular, normal code doesn't need
to care about two kinds of references, etc.  And we get to keep
the optimization Nick's variant had bought us...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-16 13:47:07 -05:00
Linus Torvalds
b2034d474b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (41 commits)
  fs: add documentation on fallocate hole punching
  Gfs2: fail if we try to use hole punch
  Btrfs: fail if we try to use hole punch
  Ext4: fail if we try to use hole punch
  Ocfs2: handle hole punching via fallocate properly
  XFS: handle hole punching via fallocate properly
  fs: add hole punching to fallocate
  vfs: pass struct file to do_truncate on O_TRUNC opens (try #2)
  fix signedness mess in rw_verify_area() on 64bit architectures
  fs: fix kernel-doc for dcache::prepend_path
  fs: fix kernel-doc for dcache::d_validate
  sanitize ecryptfs ->mount()
  switch afs
  move internal-only parts of ncpfs headers to fs/ncpfs
  switch ncpfs
  switch 9p
  pass default dentry_operations to mount_pseudo()
  switch hostfs
  switch affs
  switch configfs
  ...
2011-01-13 10:27:28 -08:00
Davide Libenzi
e462c448fd pipe: use event aware wakeups
Send the events the wakeup refers to, so that epoll, and even the new poll
code in fs/select.c can avoid wakeups if the events do not match the
requested set.

Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:15 -08:00
Al Viro
c74a1cbb3c pass default dentry_operations to mount_pseudo()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-12 20:03:43 -05:00
Nick Piggin
b3e19d924b fs: scale mntget/mntput
The problem that this patch aims to fix is vfsmount refcounting scalability.
We need to take a reference on the vfsmount for every successful path lookup,
which often go to the same mount point.

The fundamental difficulty is that a "simple" reference count can never be made
scalable, because any time a reference is dropped, we must check whether that
was the last reference. To do that requires communication with all other CPUs
that may have taken a reference count.

We can make refcounts more scalable in a couple of ways, involving keeping
distributed counters, and checking for the global-zero condition less
frequently.

- check the global sum once every interval (this will delay zero detection
  for some interval, so it's probably a showstopper for vfsmounts).

- keep a local count and only taking the global sum when local reaches 0 (this
  is difficult for vfsmounts, because we can't hold preempt off for the life of
  a reference, so a counter would need to be per-thread or tied strongly to a
  particular CPU which requires more locking).

- keep a local difference of increments and decrements, which allows us to sum
  the total difference and hence find the refcount when summing all CPUs. Then,
  keep a single integer "long" refcount for slow and long lasting references,
  and only take the global sum of local counters when the long refcount is 0.

This last scheme is what I implemented here. Attached mounts and process root
and working directory references are "long" references, and everything else is
a short reference.

This allows scalable vfsmount references during path walking over mounted
subtrees and unattached (lazy umounted) mounts with processes still running
in them.

This results in one fewer atomic op in the fastpath: mntget is now just a
per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock
and non-atomic decrement in the common case. However code is otherwise bigger
and heavier, so single threaded performance is basically a wash.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 17:50:33 +11:00