Commit Graph

321 Commits

Author SHA1 Message Date
Daniel Borkmann
32b3652c30 bpf: sync tools bpf.h uapi header
Only sync the header from include/uapi/linux/bpf.h.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-03 16:49:20 -07:00
William Tu
c0dd967818 tools, include: Grab a copy of linux/erspan.h
Bring the erspan uapi header file so BPF tunnel helpers can use it.

Fixes: 933a741e3b ("selftests/bpf: bpf tunnel test.")
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-30 17:56:24 +02:00
Quentin Monnet
a56497d3d5 bpf: update bpf.h uapi header for tools
Bring fixes for eBPF helper documentation formatting to bpf.h under
tools/ as well.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-30 13:53:12 +02:00
Andrey Ignatov
96871b9f6f bpf: Sync bpf.h to tools/
The patch syncs bpf.h to tools/.

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-04-29 08:56:31 -07:00
Yonghong Song
de2ff05f48 tools/bpf: add bpf_get_stack helper to tools headers
The tools header file bpf.h is synced with kernel uapi bpf.h.
The new helper is also added to bpf_helpers.h.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-04-29 08:45:53 -07:00
David S. Miller
79741a38b4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2018-04-27

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add extensive BPF helper description into include/uapi/linux/bpf.h
   and a new script bpf_helpers_doc.py which allows for generating a
   man page out of it. Thus, every helper in BPF now comes with proper
   function signature, detailed description and return code explanation,
   from Quentin.

2) Migrate the BPF collect metadata tunnel tests from BPF samples over
   to the BPF selftests and further extend them with v6 vxlan, geneve
   and ipip tests, simplify the ipip tests, improve documentation and
   convert to bpf_ntoh*() / bpf_hton*() api, from William.

3) Currently, helpers that expect ARG_PTR_TO_MAP_{KEY,VALUE} can only
   access stack and packet memory. Extend this to allow such helpers
   to also use map values, which enabled use cases where value from
   a first lookup can be directly used as a key for a second lookup,
   from Paul.

4) Add a new helper bpf_skb_get_xfrm_state() for tc BPF programs in
   order to retrieve XFRM state information containing SPI, peer
   address and reqid values, from Eyal.

5) Various optimizations in nfp driver's BPF JIT in order to turn ADD
   and SUB instructions with negative immediate into the opposite
   operation with a positive immediate such that nfp can better fit
   small immediates into instructions. Savings in instruction count
   up to 4% have been observed, from Jakub.

6) Add the BPF prog's gpl_compatible flag to struct bpf_prog_info
   and add support for dumping this through bpftool, from Jiri.

7) Move the BPF sockmap samples over into BPF selftests instead since
   sockmap was rather a series of tests than sample anyway and this way
   this can be run from automated bots, from John.

8) Follow-up fix for bpf_adjust_tail() helper in order to make it work
   with generic XDP, from Nikita.

9) Some follow-up cleanups to BTF, namely, removing unused defines from
   BTF uapi header and renaming 'name' struct btf_* members into name_off
   to make it more clear they are offsets into string section, from Martin.

10) Remove test_sock_addr from TEST_GEN_PROGS in BPF selftests since
    not run directly but invoked from test_sock_addr.sh, from Yonghong.

11) Remove redundant ret assignment in sample BPF loader, from Wang.

12) Add couple of missing files to BPF selftest's gitignore, from Anders.

There are two trivial merge conflicts while pulling:

  1) Remove samples/sockmap/Makefile since all sockmap tests have been
     moved to selftests.
  2) Add both hunks from tools/testing/selftests/bpf/.gitignore to the
     file since git should ignore all of them.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-26 21:19:50 -04:00
Quentin Monnet
9cde0c8892 bpf: update bpf.h uapi header for tools
Update tools/include/uapi/linux/bpf.h file in order to reflect the
changes for BPF helper functions documentation introduced in previous
commits.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-27 00:21:59 +02:00
Jiri Olsa
fb6ef42b5c tools, bpf: Sync bpf.h uapi header
Syncing the bpf.h uapi header with tools.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-26 22:38:38 +02:00
David S. Miller
c749fa181b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2018-04-24 23:59:11 -04:00
John Fastabend
16962b2404 bpf: sockmap, add selftests
This adds a new test program test_sockmap which is the old sample
sockmap program. By moving the sample program here we can now run it
as part of the self tests suite. To support this a populate_progs()
routine is added to load programs and maps which was previously done
with load_bpf_file(). This is needed because self test libs do not
provide a similar routine. Also we now use the cgroup_helpers
routines to manage cgroup use instead of manually creating one and
supplying it to the CLI.

Notice we keep the CLI around though because it is useful for dbg
and specialized testing.

To run use ./test_sockmap and the result should be,

Summary 660 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-25 00:06:20 +02:00
Eyal Birger
29a36f9eef samples/bpf: extend test_tunnel_bpf.sh with xfrm state test
Add a test for fetching xfrm state parameters from a tc program running
on ingress.

Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-24 22:26:58 +02:00
Martin KaFai Lau
fbcf93ebca bpf: btf: Clean up btf.h in uapi
This patch cleans up btf.h in uapi:
1) Rename "name" to "name_off" to better reflect it is an offset to the
   string section instead of a char array.
2) Remove unused value BTF_FLAGS_COMPR and BTF_MAGIC_SWAP

Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-23 11:32:01 +02:00
David S. Miller
e0ada51db9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts were simple overlapping changes in microchip
driver.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-21 16:32:48 -04:00
Martin KaFai Lau
3bd86a8409 bpf: btf: Sync bpf.h and btf.h to tools/
This patch sync up the bpf.h and btf.h to tools/

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-19 21:46:25 +02:00
Mathieu Poirier
8a9fd83230 coresight: Move to SPDX identifier
Move CoreSight headers to the SPDX identifier.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1524089118-27595-1-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-19 12:29:41 -03:00
Nikita V. Shirokov
0367d0a294 bpf: adding tests for bpf_xdp_adjust_tail
adding selftests for bpf_xdp_adjust_tail helper. in this synthetic test
we are testing that 1) if data_end < data helper will return EINVAL
2) for normal use case packet's length would be reduced.

Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-18 23:34:17 +02:00
Alexey Budankov
101592b490 perf/core: Store context switch out type in PERF_RECORD_SWITCH[_CPU_WIDE]
Store preempting context switch out event into Perf trace as a part of
PERF_RECORD_SWITCH[_CPU_WIDE] record.

Percentage of preempting and non-preempting context switches help
understanding the nature of workloads (CPU or IO bound) that are running
on a machine;

The event is treated as preemption one when task->state value of the
thread being switched out is TASK_RUNNING. Event type encoding is
implemented using PERF_RECORD_MISC_SWITCH_OUT_PREEMPT bit;

Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/9ff84e83-a0ca-dd82-a6d0-cb951689be74@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-17 09:47:39 -03:00
Ingo Molnar
e2f73a1828 tools/headers: Synchronize kernel ABI headers, v4.17-rc1
Sync the following tooling headers with the latest kernel version:

  tools/arch/arm/include/uapi/asm/kvm.h
    - New ABI: KVM_REG_ARM_*

  tools/arch/x86/include/asm/required-features.h
    - Removal of NEED_LA57 dependency

  tools/arch/x86/include/uapi/asm/kvm.h
    - New KVM ABI: KVM_SYNC_X86_*

  tools/include/uapi/asm-generic/mman-common.h
    - New ABI: MAP_FIXED_NOREPLACE flag

  tools/include/uapi/linux/bpf.h
    - New ABI: BPF_F_SEQ_NUMBER functions

  tools/include/uapi/linux/if_link.h
    - New ABI: IFLA tun and rmnet support

  tools/include/uapi/linux/kvm.h
    - New ABI: hyperv eventfd and CONN_ID_MASK support plus header cleanups

  tools/include/uapi/sound/asound.h
    - New ABI: SNDRV_PCM_FORMAT_FIRST PCM format specifier

  tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
    - The x86 system call table description changed due to the ptregs changes and the renames, in:

	d5a00528b5: syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()
	5ac9efa3c5: syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention
	ebeb8c82ff: syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32

Also fix the x86 syscall table warning:

  -Warning: Kernel ABI header at 'tools/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
  +Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'

None of these changes impact existing tooling code, so we only have to copy the kernel version.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brian Robbins <brianrob@microsoft.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com> <dvyukov@google.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Takuya Yamamoto <tkydevel@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: William Cohen <wcohen@redhat.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lkml.kernel.org/r/20180416064024.ofjtrz5yuu3ykhvl@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-17 09:47:39 -03:00
Ingo Molnar
aacd188a2d perf/core improvements and fixes:
perf annotate:
 
 - Allow showing offsets in more than just jump targets, use the new
   'O' hotkey in the TUI, config ~/.perfconfig annotate.offset_level
   for it and for --stdio2 (Arnaldo Carvalho de Melo)
 
 - Use the resolved variable names from objdump disassembled lines to
   make them more compact, just like was already done for some instructions,
   like "mov", this eventually will be done more generally, but lets now add
   some more to the existing mechanism (Arnaldo Carvalho de Melo)
 
 perf record:
 
 - Change warning for missing topology sysfs entry to debug, as not all
   architectures have those files, s390 being one of those (Thomas Richter)
 
 perf sched:
 
 - Fix -g/--call-graph documentation (Takuya Yamamoto)
 
 perf stat:
 
 - Enable 1ms interval for printing event counters values in (Alexey Budankov)
 
 perf test:
 
 - Run dwarf unwind  on arm32 (Kim Phillips)
 
 - Remove unused ptrace.h include from LLVM test, sidesteping older
   clang's lack of support for some asm constructs (Arnaldo Carvalho de Melo)
 
 perf version:
 
 - Do not print info about HAVE_LIBAUDIT_SUPPORT in 'perf version --build-options'
   when HAVE_SYSCALL_TABLE_SUPPORT is true, as libaudit won't be used in that
   case, print info about syscall_table support instead (Jin Yao)
 
 Build system:
 
 - Use HAVE_..._SUPPORT used consistently (Jin Yao)
 
 - Restore READ_ONCE() C++ compatibility in tools/include (Mark Rutland)
 
 - Give hints about package names needed to build jvmti (Arnaldo Carvalho de Melo)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEELb9bqkb7Te0zijNb1lAW81NSqkAFAlrQq1MACgkQ1lAW81NS
 qkCt3A/+N3Tq41g6zxvO5kIH/mnjCdZ6D1n+7qPOkBnmEPZhsyo6QCiYld3gHxaq
 kmOecRqKzdMx/4xDArdCXizw0iNWecAEa0vCk+A8qfEeBS9ZiditU+vqrzLhzbxr
 wHR1YA3oJSUeQzGmTbXgjjc2ySmfK7EJcBdP+diESXQIRkO6DfpPsxeR6UBoyGT+
 gWM5GvTRxa4P6hlVv+uEsdWDvziPIL7Uk/ykKJA6s2BVScvXog2uJqfzroYlqJWG
 TIEobGfU7zoLVuZtuj/8E8tncQwyNSX+BgFRiZxX5gHxv4VGG1q7D4ug302Q/ctU
 Dkted9+lL7W1cFcNOgsFJAm5TkaczGKFezRvVMVv6T9LCJbJIddRxG5LjKWPb1Gk
 ok242hlFzH2a1Sas7MQKRXnhaHxjjVUTKO6Vgq24AXoWgFWVyTdNtFL8D7FBkQfZ
 eL0S10mgUSG5n3WnfKeomgt2BqwTMURXEIwRnMv+er2hkmeBl80K9BbKBc8KyAAX
 CLn2bS35S/NXyX4Cin44gBYLPdbDjg7r8WDdtstIQsmF6SvofDtTCKlVhQL9++BH
 lOH+hPkwuai1eOXnhUgCd0pUbO5PmcKfpd2Tv5hOR3Xr6ATL7HEZ8k24Tl6r1T7T
 MAfz4lv/wUoX+Gx1xpxt/6+hAau+yNs2QW5i7Szk/NCMUSx/rlw=
 =mR6l
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo-4.17-20180413' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull tooling improvements and fixes from Arnaldo Carvalho de Melo:

perf annotate fixes and improvements:

- Allow showing offsets in more than just jump targets, use the new
  'O' hotkey in the TUI, config ~/.perfconfig annotate.offset_level
  for it and for --stdio2 (Arnaldo Carvalho de Melo)

- Use the resolved variable names from objdump disassembled lines to
  make them more compact, just like was already done for some instructions,
  like "mov", this eventually will be done more generally, but lets now add
  some more to the existing mechanism (Arnaldo Carvalho de Melo)

perf record fixes:

- Change warning for missing topology sysfs entry to debug, as not all
  architectures have those files, s390 being one of those (Thomas Richter)

perf sched fixes:

- Fix -g/--call-graph documentation (Takuya Yamamoto)

perf stat:

- Enable 1ms interval for printing event counters values in (Alexey Budankov)

perf test fixes:

- Run dwarf unwind  on arm32 (Kim Phillips)

- Remove unused ptrace.h include from LLVM test, sidesteping older
  clang's lack of support for some asm constructs (Arnaldo Carvalho de Melo)

perf version fixes:

- Do not print info about HAVE_LIBAUDIT_SUPPORT in 'perf version --build-options'
  when HAVE_SYSCALL_TABLE_SUPPORT is true, as libaudit won't be used in that
  case, print info about syscall_table support instead (Jin Yao)

Build system fixes:

- Use HAVE_..._SUPPORT used consistently (Jin Yao)

- Restore READ_ONCE() C++ compatibility in tools/include (Mark Rutland)

- Give hints about package names needed to build jvmti (Arnaldo Carvalho de Melo)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-16 08:15:22 +02:00
Linus Torvalds
174e719439 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more perf updates from Thomas Gleixner:
 "A rather large set of perf updates:

  Kernel:

   - Fix various initialization issues

   - Prevent creating [ku]probes for not CAP_SYS_ADMIN users

  Tooling:

   - Show only failing syscalls with 'perf trace --failure' (Arnaldo
     Carvalho de Melo)

            e.g: See what 'openat' syscalls are failing:

        # perf trace --failure -e openat
         762.323 ( 0.007 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video2) = -1 ENOENT No such file or directory
         <SNIP N /dev/videoN open attempts... sigh, where is that improvised camera lid?!? >
         790.228 ( 0.008 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video63) = -1 ENOENT No such file or directory
        ^C#

   - Show information about the event (freq, nr_samples, total
     period/nr_events) in the annotate --tui and --stdio2 'perf
     annotate' output, similar to the first line in the 'perf report
     --tui', but just for the samples for a the annotated symbol
     (Arnaldo Carvalho de Melo)

   - Introduce 'perf version --build-options' to show what features were
     linked, aliased as well as a shorter 'perf -vv' (Jin Yao)

   - Add a "dso_size" sort order (Kim Phillips)

   - Remove redundant ')' in the tracepoint output in 'perf trace'
     (Changbin Du)

   - Synchronize x86's cpufeatures.h, no effect on toolss (Arnaldo
     Carvalho de Melo)

   - Show group details on the title line in the annotate browser and
     'perf annotate --stdio2' output, so that the per-event columns can
     have headers (Arnaldo Carvalho de Melo)

   - Fixup vertical line separating metrics from instructions and
     cleaning unused lines at the bottom, both in the annotate TUI
     browser (Arnaldo Carvalho de Melo)

   - Remove duplicated 'samples' in lost samples warning in
     'perf report' (Arnaldo Carvalho de Melo)

   - Synchronize i915_drm.h, silencing the perf build process,
     automagically adding support for the new DRM_I915_QUERY ioctl
     (Arnaldo Carvalho de Melo)

   - Make auxtrace_queues__add_buffer() allocate struct buffer, from a
     patchkit already applied (Adrian Hunter)

   - Fix the --stdio2/TUI annotate output to include group details, be
     it for a recorded '{a,b,f}' explicit event group or when forcing
     group display using 'perf report --group' for a set of events not
     recorded as a group (Arnaldo Carvalho de Melo)

   - Fix display artifacts in the ui browser (base class for the
     annotate and main report/top TUI browser) related to the extra
     title lines work (Arnaldo Carvalho de Melo)

   - perf auxtrace refactorings, leftovers from a previously partially
     processed patchset (Adrian Hunter)

   - Fix the builtin clang build (Sandipan Das, Arnaldo Carvalho de
     Melo)

   - Synchronize i915_drm.h, silencing a perf build warning and in the
     process automagically adding support for a new ioctl command
     (Arnaldo Carvalho de Melo)

   - Fix a strncpy issue in uprobe tracing"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  perf/core: Need CAP_SYS_ADMIN to create k/uprobe with perf_event_open()
  tracing/uprobe_event: Fix strncpy corner case
  perf/core: Fix perf_uprobe_init()
  perf/core: Fix perf_kprobe_init()
  perf/core: Fix use-after-free in uprobe_perf_close()
  perf tests clang: Fix function name for clang IR test
  perf clang: Add support for recent clang versions
  perf tools: Fix perf builds with clang support
  perf tools: No need to include namespaces.h in util.h
  perf hists browser: Remove leftover from row returned from refresh
  perf hists browser: Show extra_title_lines in the 'D' debug hotkey
  perf auxtrace: Make auxtrace_queues__add_buffer() do CPU filtering
  tools headers uapi: Synchronize i915_drm.h
  perf report: Remove duplicated 'samples' in lost samples warning
  perf ui browser: Fixup cleaning unused lines at the bottom
  perf annotate browser: Fixup vertical line separating metrics from instructions
  perf annotate: Show group details on the title line
  perf auxtrace: Make auxtrace_queues__add_buffer() allocate struct buffer
  perf/x86/intel: Move regs->flags EXACT bit init
  perf trace: Remove redundant ')'
  ...
2018-04-15 12:36:31 -07:00
Mark Rutland
4d3b57da15 tools headers: Restore READ_ONCE() C++ compatibility
Our userspace <linux/compiler.h> defines READ_ONCE() in a way that clang
doesn't like, as we have an anonymous union in which neither field is
initialized.

WRITE_ONCE() is fine since it initializes the __val field. For
READ_ONCE() we can keep clang and GCC happy with a dummy initialization
of the __c field, so let's do that.

At the same time, let's split READ_ONCE() and WRITE_ONCE() over several
lines for legibility, as we do in the in-kernel <linux/compiler.h>.

Reported-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reported-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Tested-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 6aa7de0591 ("locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()")
Link: http://lkml.kernel.org/r/20180404163445.16492-1-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-12 09:30:09 -03:00
Matthew Wilcox
f6bb2a2c0b xarray: add the xa_lock to the radix_tree_root
This results in no change in structure size on 64-bit machines as it
fits in the padding between the gfp_t and the void *.  32-bit machines
will grow the structure from 8 to 12 bytes.  Almost all radix trees are
protected with (at least) a spinlock, so as they are converted from
radix trees to xarrays, the data structures will shrink again.

Initialising the spinlock requires a name for the benefit of lockdep, so
RADIX_TREE_INIT() now needs to know the name of the radix tree it's
initialising, and so do IDR_INIT() and IDA_INIT().

Also add the xa_lock() and xa_unlock() family of wrappers to make it
easier to use the lock.  If we could rely on -fplan9-extensions in the
compiler, we could avoid all of this syntactic sugar, but that wasn't
added until gcc 4.6.

Link: http://lkml.kernel.org/r/20180313132639.17387-8-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11 10:28:39 -07:00
Linus Torvalds
d8312a3f61 ARM:
- VHE optimizations
 - EL2 address space randomization
 - speculative execution mitigations ("variant 3a", aka execution past invalid
 privilege register access)
 - bugfixes and cleanups
 
 PPC:
 - improvements for the radix page fault handler for HV KVM on POWER9
 
 s390:
 - more kvm stat counters
 - virtio gpu plumbing
 - documentation
 - facilities improvements
 
 x86:
 - support for VMware magic I/O port and pseudo-PMCs
 - AMD pause loop exiting
 - support for AMD core performance extensions
 - support for synchronous register access
 - expose nVMX capabilities to userspace
 - support for Hyper-V signaling via eventfd
 - use Enlightened VMCS when running on Hyper-V
 - allow userspace to disable MWAIT/HLT/PAUSE vmexits
 - usual roundup of optimizations and nested virtualization bugfixes
 
 Generic:
 - API selftest infrastructure (though the only tests are for x86 as of now)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJay19UAAoJEL/70l94x66DGKYIAIu9PTHAEwaX0et15fPW5y2x
 rrtS355lSAmMrPJ1nePRQ+rProD/1B0Kizj3/9O+B9OTKKRsorRYNa4CSu9neO2k
 N3rdE46M1wHAPwuJPcYvh3iBVXtgbMayk1EK5aVoSXaMXEHh+PWZextkl+F+G853
 kC27yDy30jj9pStwnEFSBszO9ua/URdKNKBATNx8WUP6d9U/dlfm5xv3Dc3WtKt2
 UMGmog2wh0i7ecXo7hRkMK4R7OYP3ZxAexq5aa9BOPuFp+ZdzC/MVpN+jsjq2J/M
 Zq6RNyA2HFyQeP0E9QgFsYS2BNOPeLZnT5Jg1z4jyiD32lAZ/iC51zwm4oNKcDM=
 =bPlD
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
 "ARM:
   - VHE optimizations

   - EL2 address space randomization

   - speculative execution mitigations ("variant 3a", aka execution past
     invalid privilege register access)

   - bugfixes and cleanups

  PPC:
   - improvements for the radix page fault handler for HV KVM on POWER9

  s390:
   - more kvm stat counters

   - virtio gpu plumbing

   - documentation

   - facilities improvements

  x86:
   - support for VMware magic I/O port and pseudo-PMCs

   - AMD pause loop exiting

   - support for AMD core performance extensions

   - support for synchronous register access

   - expose nVMX capabilities to userspace

   - support for Hyper-V signaling via eventfd

   - use Enlightened VMCS when running on Hyper-V

   - allow userspace to disable MWAIT/HLT/PAUSE vmexits

   - usual roundup of optimizations and nested virtualization bugfixes

  Generic:
   - API selftest infrastructure (though the only tests are for x86 as
     of now)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (174 commits)
  kvm: x86: fix a prototype warning
  kvm: selftests: add sync_regs_test
  kvm: selftests: add API testing infrastructure
  kvm: x86: fix a compile warning
  KVM: X86: Add Force Emulation Prefix for "emulate the next instruction"
  KVM: X86: Introduce handle_ud()
  KVM: vmx: unify adjacent #ifdefs
  x86: kvm: hide the unused 'cpu' variable
  KVM: VMX: remove bogus WARN_ON in handle_ept_misconfig
  Revert "KVM: X86: Fix SMRAM accessing even if VM is shutdown"
  kvm: Add emulation for movups/movupd
  KVM: VMX: raise internal error for exception during invalid protected mode state
  KVM: nVMX: Optimization: Dont set KVM_REQ_EVENT when VMExit with nested_run_pending
  KVM: nVMX: Require immediate-exit when event reinjected to L2 and L1 event pending
  KVM: x86: Fix misleading comments on handling pending exceptions
  KVM: x86: Rename interrupt.pending to interrupt.injected
  KVM: VMX: No need to clear pending NMI/interrupt on inject realmode interrupt
  x86/kvm: use Enlightened VMCS when running on Hyper-V
  x86/hyper-v: detect nested features
  x86/hyper-v: define struct hv_enlightened_vmcs and clean field bits
  ...
2018-04-09 11:42:31 -07:00
Arnaldo Carvalho de Melo
01f97511f1 tools headers uapi: Synchronize i915_drm.h
To pick up the changes in:

  c822e05918 drm/i915: expose rcs topology through query uAPI
  a446ae2c6e drm/i915: add query uAPI

This affects 'perf trace', that automagically gets the definition of the
new I915_QUERY DRM ioctl:

  --- /tmp/build/perf/trace/beauty/generated/ioctl/drm_ioctl_array.c.old 2018-04-05 14:38:33.660111995 -0300
  +++ /tmp/build/perf/trace/beauty/generated/ioctl/drm_ioctl_array.c 2018-04-05 14:40:17.923283914 -0300
  @@ -158,4 +158,5 @@
          [DRM_COMMAND_BASE + 0x36] = "I915_PERF_OPEN",
          [DRM_COMMAND_BASE + 0x37] = "I915_PERF_ADD_CONFIG",
          [DRM_COMMAND_BASE + 0x38] = "I915_PERF_REMOVE_CONFIG",
  +       [DRM_COMMAND_BASE + 0x39] = "I915_QUERY",
   };

I.e. on systems where this is used it will appear when, for instance,
one does a system wide 'perf trace' session looking for ioctl calls,
just like it does with the previously implemented DRM_I915 ioctls:

  # perf trace -e ioctl --filter-pids 2190
<SNIP>
  4346.232 ( 0.012 ms): gnome-shell/1455 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_BUSY, arg: 0x7fff3b0cd910) = 0
  4346.246 ( 0.002 ms): gnome-shell/1455 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_MADVISE, arg: 0x7fff3b0cd980) = 0
  4346.252 ( 0.002 ms): gnome-shell/1455 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_BUSY, arg: 0x7fff3b0cdb00) = 0
<SNIP>

This silences this perf tools build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-5kxuvruuzdbojvf90f8j2wat@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-05 14:48:51 -03:00
Ingo Molnar
b89e7914f0 perf/core improvements and fixes:
- Show only failing syscalls with 'perf trace --failure' (Arnaldo Carvalho de Melo)
 
 	e.g: See what 'openat' syscalls are failing:
 
   # perf trace --failure -e openat
    762.323 ( 0.007 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video2) = -1 ENOENT No such file or directory
    <SNIP N /dev/videoN open attempts... sigh, where is that improvised camera lid?!? >
    790.228 ( 0.008 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video63) = -1 ENOENT No such file or directory
   ^C#
 
 - Show information about the event (freq, nr_samples, total period/nr_events) in
   the annotate --tui and --stdio2 'perf annotate' output, similar to the
   first line in the 'perf report --tui', but just for the samples for a
   the annotated symbol (Arnaldo Carvalho de Melo)
 
 - Introduce 'perf version --build-options' to show what features were
   linked, aliased as well as a shorter 'perf -vv' (Jin Yao)
 
 - Add a "dso_size" sort order (Kim Phillips)
 
 - Remove redundant ')' in the tracepoint output in 'perf trace' (Changbin Du)
 
 - Synchronize x86's cpufeatures.h, no effect on toolss (Arnaldo Carvalho de Melo)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEELb9bqkb7Te0zijNb1lAW81NSqkAFAlrD3tIACgkQ1lAW81NS
 qkAPpQ//ZQ/8MTEGwoFTnuAM0D6Nu85i+0F8CBdryxDjPoE+g21eWKmcym/TUl4A
 PFB/i1ekVYt4hSpS4hIsfD4VQWcLeIOIKcTmPsJgqdhG56SbrnO+UOFWgNnLAuN5
 4rwBXwRy1NFVy0E/O/kUxnsJRIzwvk8F9fWeynQ6TLp/cYAXdCC2w8hiHiKaJ+nF
 aTW+8BYktKUyVZHUDEtNhniYLhcmi70d2NrSd7/1Y8tRobB1yVMLs20pYs/T4vta
 aStA3GkDRShXcC9y426b+9AnG7Zjs4nQuMVIoIQbyReN2bIrC182G5OxepIG81bz
 rcnTiAhini52ZtlXIUs/s1x2vGXUCTbLtpwgim01huJjZ6qC6K7HeRqxGuhVHK/H
 DWddGTlnerwIzlBm1D1ubi5r0gi5phplkNBZPtUOmLLG7E1NnWpU7j2ikzlZkbwX
 v0IEDwt7Z/WFLhhUlGGloEq0zSYbj4o7YkTWFrU0C7wnW4nzRkXTxQfSL26HrMPY
 5JaL3gppxVI3bbGeYVtzVoXQT30H8v85P2A0kx+1HnvwJ8AVQrnMqDr17BUT4/vo
 e3fmzOf5IjhEB52amwKSIGMcAglSIHg8Zdi72tJdPebvTZiDiuLWctmHBULeHUVh
 vPH6k1czzRj0FPDYME2vZCf7H+OFMxP2Cqqwkq7Ke4zTHvm1cIw=
 =tvR6
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo-4.17-20180403' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

- Show only failing syscalls with 'perf trace --failure' (Arnaldo Carvalho de Melo)

	e.g: See what 'openat' syscalls are failing:

  # perf trace --failure -e openat
   762.323 ( 0.007 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video2) = -1 ENOENT No such file or directory
   <SNIP N /dev/videoN open attempts... sigh, where is that improvised camera lid?!? >
   790.228 ( 0.008 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video63) = -1 ENOENT No such file or directory
  ^C#

- Show information about the event (freq, nr_samples, total period/nr_events) in
  the annotate --tui and --stdio2 'perf annotate' output, similar to the
  first line in the 'perf report --tui', but just for the samples for a
  the annotated symbol (Arnaldo Carvalho de Melo)

- Introduce 'perf version --build-options' to show what features were
  linked, aliased as well as a shorter 'perf -vv' (Jin Yao)

- Add a "dso_size" sort order (Kim Phillips)

- Remove redundant ')' in the tracepoint output in 'perf trace' (Changbin Du)

- Synchronize x86's cpufeatures.h, no effect on toolss (Arnaldo Carvalho de Melo)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-04 07:23:52 +02:00
Linus Torvalds
5bb053bef8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Support offloading wireless authentication to userspace via
    NL80211_CMD_EXTERNAL_AUTH, from Srinivas Dasari.

 2) A lot of work on network namespace setup/teardown from Kirill Tkhai.
    Setup and cleanup of namespaces now all run asynchronously and thus
    performance is significantly increased.

 3) Add rx/tx timestamping support to mv88e6xxx driver, from Brandon
    Streiff.

 4) Support zerocopy on RDS sockets, from Sowmini Varadhan.

 5) Use denser instruction encoding in x86 eBPF JIT, from Daniel
    Borkmann.

 6) Support hw offload of vlan filtering in mvpp2 dreiver, from Maxime
    Chevallier.

 7) Support grafting of child qdiscs in mlxsw driver, from Nogah
    Frankel.

 8) Add packet forwarding tests to selftests, from Ido Schimmel.

 9) Deal with sub-optimal GSO packets better in BBR congestion control,
    from Eric Dumazet.

10) Support 5-tuple hashing in ipv6 multipath routing, from David Ahern.

11) Add path MTU tests to selftests, from Stefano Brivio.

12) Various bits of IPSEC offloading support for mlx5, from Aviad
    Yehezkel, Yossi Kuperman, and Saeed Mahameed.

13) Support RSS spreading on ntuple filters in SFC driver, from Edward
    Cree.

14) Lots of sockmap work from John Fastabend. Applications can use eBPF
    to filter sendmsg and sendpage operations.

15) In-kernel receive TLS support, from Dave Watson.

16) Add XDP support to ixgbevf, this is significant because it should
    allow optimized XDP usage in various cloud environments. From Tony
    Nguyen.

17) Add new Intel E800 series "ice" ethernet driver, from Anirudh
    Venkataramanan et al.

18) IP fragmentation match offload support in nfp driver, from Pieter
    Jansen van Vuuren.

19) Support XDP redirect in i40e driver, from Björn Töpel.

20) Add BPF_RAW_TRACEPOINT program type for accessing the arguments of
    tracepoints in their raw form, from Alexei Starovoitov.

21) Lots of striding RQ improvements to mlx5 driver with many
    performance improvements, from Tariq Toukan.

22) Use rhashtable for inet frag reassembly, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1678 commits)
  net: mvneta: improve suspend/resume
  net: mvneta: split rxq/txq init and txq deinit into SW and HW parts
  ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh
  net: bgmac: Fix endian access in bgmac_dma_tx_ring_free()
  net: bgmac: Correctly annotate register space
  route: check sysctl_fib_multipath_use_neigh earlier than hash
  fix typo in command value in drivers/net/phy/mdio-bitbang.
  sky2: Increase D3 delay to sky2 stops working after suspend
  net/mlx5e: Set EQE based as default TX interrupt moderation mode
  ibmvnic: Disable irqs before exiting reset from closed state
  net: sched: do not emit messages while holding spinlock
  vlan: also check phy_driver ts_info for vlan's real device
  Bluetooth: Mark expected switch fall-throughs
  Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME
  Bluetooth: btrsi: remove unused including <linux/version.h>
  Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4
  sh_eth: kill useless check in __sh_eth_get_regs()
  sh_eth: add sh_eth_cpu_data::no_xdfar flag
  ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data()
  ipv4: factorize sk_wmem_alloc updates done by __ip_append_data()
  ...
2018-04-03 14:04:18 -07:00
Linus Torvalds
f5a8eb632b arch: remove obsolete architecture ports
This removes the entire architecture code for blackfin, cris, frv, m32r,
 metag, mn10300, score, and tile, including the associated device drivers.
 
 I have been working with the (former) maintainers for each one to ensure
 that my interpretation was right and the code is definitely unused in
 mainline kernels. Many had fond memories of working on the respective
 ports to start with and getting them included in upstream, but also saw
 no point in keeping the port alive without any users.
 
 In the end, it seems that while the eight architectures are extremely
 different, they all suffered the same fate: There was one company
 in charge of an SoC line, a CPU microarchitecture and a software
 ecosystem, which was more costly than licensing newer off-the-shelf
 CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems
 that all the SoC product lines are still around, but have not used the
 custom CPU architectures for several years at this point. In contrast,
 CPU instruction sets that remain popular and have actively maintained
 kernel ports tend to all be used across multiple licensees.
 
 The removal came out of a discussion that is now documented at
 https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
 marking any ports as deprecated but remove them all at once after I made
 sure that they are all unused. Some architectures (notably tile, mn10300,
 and blackfin) are still being shipped in products with old kernels,
 but those products will never be updated to newer kernel releases.
 
 After this series, we still have a few architectures without mainline
 gcc support:
 
 - unicore32 and hexagon both have very outdated gcc releases, but the
   maintainers promised to work on providing something newer. At least
   in case of hexagon, this will only be llvm, not gcc.
 
 - openrisc, risc-v and nds32 are still in the process of finishing their
   support or getting it added to mainline gcc in the first place.
   They all have patched gcc-7.3 ports that work to some degree, but
   complete upstream support won't happen before gcc-8.1. Csky posted
   their first kernel patch set last week, their situation will be similar.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJawdL2AAoJEGCrR//JCVInuH0P/RJAZh1nTD+TR34ZhJq2TBoo
 PgygwDU7Z2+tQVU+EZ453Gywz9/NMRFk1RWAZqrLix4ZtyIMvC6A1qfT2yH1Y7Fb
 Qh6tccQeLe4ezq5u4S/46R/fQXu3Txr92yVwzJJUuPyU0arF9rv5MmI8e6p7L1en
 yb74kSEaCe+/eMlsEj1Cc1dgthDNXGKIURHkRsILoweysCpesjiTg4qDcL+yTibV
 FP2wjVbniKESMKS6qL71tiT5sexvLsLwMNcGiHPj94qCIQuI7DLhLdBVsL5Su6gI
 sbtgv0dsq4auRYAbQdMaH1hFvu6WptsuttIbOMnz2Yegi2z28H8uVXkbk2WVLbqG
 ZESUwutGh8MzOL2RJ4jyyQq5sfo++CRGlfKjr6ImZRv03dv0pe/W85062cK5cKNs
 cgDDJjGRorOXW7dyU6jG2gRqODOQBObIv3w5efdq5OgzOWlbI4EC+Y5u1Z0JF/76
 pSwtGXA6YhwC+9LLAlnVTHG+yOwuLmAICgoKcTbzTVDKA2YQZG/cYuQfI5S1wD8e
 X6urPx3Md2GCwLXQ9mzKBzKZUpu/Tuhx0NvwF4qVxy6x1PELjn68zuP7abDHr46r
 57/09ooVN+iXXnEGMtQVS/OPvYHSa2NgTSZz6Y86lCRbZmUOOlK31RDNlMvYNA+s
 3iIVHovno/JuJnTOE8LY
 =fQ8z
 -----END PGP SIGNATURE-----

Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pul removal of obsolete architecture ports from Arnd Bergmann:
 "This removes the entire architecture code for blackfin, cris, frv,
  m32r, metag, mn10300, score, and tile, including the associated device
  drivers.

  I have been working with the (former) maintainers for each one to
  ensure that my interpretation was right and the code is definitely
  unused in mainline kernels. Many had fond memories of working on the
  respective ports to start with and getting them included in upstream,
  but also saw no point in keeping the port alive without any users.

  In the end, it seems that while the eight architectures are extremely
  different, they all suffered the same fate: There was one company in
  charge of an SoC line, a CPU microarchitecture and a software
  ecosystem, which was more costly than licensing newer off-the-shelf
  CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
  seems that all the SoC product lines are still around, but have not
  used the custom CPU architectures for several years at this point. In
  contrast, CPU instruction sets that remain popular and have actively
  maintained kernel ports tend to all be used across multiple licensees.

  [ See the new nds32 port merged in the previous commit for the next
    generation of "one company in charge of an SoC line, a CPU
    microarchitecture and a software ecosystem"   - Linus ]

  The removal came out of a discussion that is now documented at
  https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
  marking any ports as deprecated but remove them all at once after I
  made sure that they are all unused. Some architectures (notably tile,
  mn10300, and blackfin) are still being shipped in products with old
  kernels, but those products will never be updated to newer kernel
  releases.

  After this series, we still have a few architectures without mainline
  gcc support:

   - unicore32 and hexagon both have very outdated gcc releases, but the
     maintainers promised to work on providing something newer. At least
     in case of hexagon, this will only be llvm, not gcc.

   - openrisc, risc-v and nds32 are still in the process of finishing
     their support or getting it added to mainline gcc in the first
     place. They all have patched gcc-7.3 ports that work to some
     degree, but complete upstream support won't happen before gcc-8.1.
     Csky posted their first kernel patch set last week, their situation
     will be similar

  [ Palmer Dabbelt points out that RISC-V support is in mainline gcc
    since gcc-7, although gcc-7.3.0 is the recommended minimum  - Linus ]"

This really says it all:

 2498 files changed, 95 insertions(+), 467668 deletions(-)

* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
  MAINTAINERS: UNICORE32: Change email account
  staging: iio: remove iio-trig-bfin-timer driver
  tty: hvc: remove tile driver
  tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
  serial: remove tile uart driver
  serial: remove m32r_sio driver
  serial: remove blackfin drivers
  serial: remove cris/etrax uart drivers
  usb: Remove Blackfin references in USB support
  usb: isp1362: remove blackfin arch glue
  usb: musb: remove blackfin port
  usb: host: remove tilegx platform glue
  pwm: remove pwm-bfin driver
  i2c: remove bfin-twi driver
  spi: remove blackfin related host drivers
  watchdog: remove bfin_wdt driver
  can: remove bfin_can driver
  mmc: remove bfin_sdh driver
  input: misc: remove blackfin rotary driver
  input: keyboard: remove bf54x driver
  ...
2018-04-02 20:20:12 -07:00
Jiri Olsa
6b416ebcc3 tools include: Add config.h header file
Adding IS_BUILTIN macro and its dependencies into tools world.

It's taken from kernel's include/linux/kconfig.h, which can't be taken
completely due to its kconfig dependencies.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1522402036-22915-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-02 13:31:38 -03:00
Andrey Ignatov
1d436885b2 selftests/bpf: Selftest for sys_bind post-hooks.
Add selftest for attach types `BPF_CGROUP_INET4_POST_BIND` and
`BPF_CGROUP_INET6_POST_BIND`.

The main things tested are:
* prog load behaves as expected (valid/invalid accesses in prog);
* prog attach behaves as expected (load- vs attach-time attach types);
* `BPF_CGROUP_INET_SOCK_CREATE` can be attached in a backward compatible
  way;
* post-hooks return expected result and errno.

Example:
  # ./test_sock
  Test case: bind4 load with invalid access: src_ip6 .. [PASS]
  Test case: bind4 load with invalid access: mark .. [PASS]
  Test case: bind6 load with invalid access: src_ip4 .. [PASS]
  Test case: sock_create load with invalid access: src_port .. [PASS]
  Test case: sock_create load w/o expected_attach_type (compat mode) ..
  [PASS]
  Test case: sock_create load w/ expected_attach_type .. [PASS]
  Test case: attach type mismatch bind4 vs bind6 .. [PASS]
  Test case: attach type mismatch bind6 vs bind4 .. [PASS]
  Test case: attach type mismatch default vs bind4 .. [PASS]
  Test case: attach type mismatch bind6 vs sock_create .. [PASS]
  Test case: bind4 reject all .. [PASS]
  Test case: bind6 reject all .. [PASS]
  Test case: bind6 deny specific IP & port .. [PASS]
  Test case: bind4 allow specific IP & port .. [PASS]
  Test case: bind4 allow all .. [PASS]
  Test case: bind6 allow all .. [PASS]
  Summary: 16 PASSED, 0 FAILED

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-31 02:16:40 +02:00
Andrey Ignatov
622adafb2a selftests/bpf: Selftest for sys_connect hooks
Add selftest for BPF_CGROUP_INET4_CONNECT and BPF_CGROUP_INET6_CONNECT
attach types.

Try to connect(2) to specified IP:port and test that:
* remote IP:port pair is overridden;
* local end of connection is bound to specified IP.

All combinations of IPv4/IPv6 and TCP/UDP are tested.

Example:
  # tcpdump -pn -i lo -w connect.pcap 2>/dev/null &
  [1] 478
  # strace -qqf -e connect -o connect.trace ./test_sock_addr.sh
  Wait for testing IPv4/IPv6 to become available ... OK
  Load bind4 with invalid type (can pollute stderr) ... REJECTED
  Load bind4 with valid type ... OK
  Attach bind4 with invalid type ... REJECTED
  Attach bind4 with valid type ... OK
  Load connect4 with invalid type (can pollute stderr) libbpf: load bpf \
    program failed: Permission denied
  libbpf: -- BEGIN DUMP LOG ---
  libbpf:
  0: (b7) r2 = 23569
  1: (63) *(u32 *)(r1 +24) = r2
  2: (b7) r2 = 16777343
  3: (63) *(u32 *)(r1 +4) = r2
  invalid bpf_context access off=4 size=4
  [ 1518.404609] random: crng init done

  libbpf: -- END LOG --
  libbpf: failed to load program 'cgroup/connect4'
  libbpf: failed to load object './connect4_prog.o'
  ... REJECTED
  Load connect4 with valid type ... OK
  Attach connect4 with invalid type ... REJECTED
  Attach connect4 with valid type ... OK
  Test case #1 (IPv4/TCP):
          Requested: bind(192.168.1.254, 4040) ..
             Actual: bind(127.0.0.1, 4444)
          Requested: connect(192.168.1.254, 4040) from (*, *) ..
             Actual: connect(127.0.0.1, 4444) from (127.0.0.4, 56068)
  Test case #2 (IPv4/UDP):
          Requested: bind(192.168.1.254, 4040) ..
             Actual: bind(127.0.0.1, 4444)
          Requested: connect(192.168.1.254, 4040) from (*, *) ..
             Actual: connect(127.0.0.1, 4444) from (127.0.0.4, 56447)
  Load bind6 with invalid type (can pollute stderr) ... REJECTED
  Load bind6 with valid type ... OK
  Attach bind6 with invalid type ... REJECTED
  Attach bind6 with valid type ... OK
  Load connect6 with invalid type (can pollute stderr) libbpf: load bpf \
    program failed: Permission denied
  libbpf: -- BEGIN DUMP LOG ---
  libbpf:
  0: (b7) r6 = 0
  1: (63) *(u32 *)(r1 +12) = r6
  invalid bpf_context access off=12 size=4

  libbpf: -- END LOG --
  libbpf: failed to load program 'cgroup/connect6'
  libbpf: failed to load object './connect6_prog.o'
  ... REJECTED
  Load connect6 with valid type ... OK
  Attach connect6 with invalid type ... REJECTED
  Attach connect6 with valid type ... OK
  Test case #3 (IPv6/TCP):
          Requested: bind(face:b00c:1234:5678::abcd, 6060) ..
             Actual: bind(::1, 6666)
          Requested: connect(face:b00c:1234:5678::abcd, 6060) from (*, *)
             Actual: connect(::1, 6666) from (::6, 37458)
  Test case #4 (IPv6/UDP):
          Requested: bind(face:b00c:1234:5678::abcd, 6060) ..
             Actual: bind(::1, 6666)
          Requested: connect(face:b00c:1234:5678::abcd, 6060) from (*, *)
             Actual: connect(::1, 6666) from (::6, 39315)
  ### SUCCESS
  # egrep 'connect\(.*AF_INET' connect.trace | \
  > egrep -vw 'htons\(1025\)' | fold -b -s -w 72
  502   connect(7, {sa_family=AF_INET, sin_port=htons(4040),
  sin_addr=inet_addr("192.168.1.254")}, 128) = 0
  502   connect(8, {sa_family=AF_INET, sin_port=htons(4040),
  sin_addr=inet_addr("192.168.1.254")}, 128) = 0
  502   connect(9, {sa_family=AF_INET6, sin6_port=htons(6060),
  inet_pton(AF_INET6, "face:b00c:1234:5678::abcd", &sin6_addr),
  sin6_flowinfo=0, sin6_scope_id=0}, 128) = 0
  502   connect(10, {sa_family=AF_INET6, sin6_port=htons(6060),
  inet_pton(AF_INET6, "face:b00c:1234:5678::abcd", &sin6_addr),
  sin6_flowinfo=0, sin6_scope_id=0}, 128) = 0
  # fg
  tcpdump -pn -i lo -w connect.pcap 2> /dev/null
  # tcpdump -r connect.pcap -n tcp | cut -c 1-72
  reading from file connect.pcap, link-type EN10MB (Ethernet)
  17:57:40.383533 IP 127.0.0.4.56068 > 127.0.0.1.4444: Flags [S], seq 1333
  17:57:40.383566 IP 127.0.0.1.4444 > 127.0.0.4.56068: Flags [S.], seq 112
  17:57:40.383589 IP 127.0.0.4.56068 > 127.0.0.1.4444: Flags [.], ack 1, w
  17:57:40.384578 IP 127.0.0.1.4444 > 127.0.0.4.56068: Flags [R.], seq 1,
  17:57:40.403327 IP6 ::6.37458 > ::1.6666: Flags [S], seq 406513443, win
  17:57:40.403357 IP6 ::1.6666 > ::6.37458: Flags [S.], seq 2448389240, ac
  17:57:40.403376 IP6 ::6.37458 > ::1.6666: Flags [.], ack 1, win 342, opt
  17:57:40.404263 IP6 ::1.6666 > ::6.37458: Flags [R.], seq 1, ack 1, win

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-31 02:16:14 +02:00
Andrey Ignatov
e50b0a6f08 selftests/bpf: Selftest for sys_bind hooks
Add selftest to work with bpf_sock_addr context from
`BPF_PROG_TYPE_CGROUP_SOCK_ADDR` programs.

Try to bind(2) on IP:port and apply:
* loads to make sure context can be read correctly, including narrow
  loads (byte, half) for IP and full-size loads (word) for all fields;
* stores to those fields allowed by verifier.

All combination from IPv4/IPv6 and TCP/UDP are tested.

Both scenarios are tested:
* valid programs can be loaded and attached;
* invalid programs can be neither loaded nor attached.

Test passes when expected data can be read from context in the
BPF-program, and after the call to bind(2) socket is bound to IP:port
pair that was written by BPF-program to the context.

Example:
  # ./test_sock_addr
  Attached bind4 program.
  Test case #1 (IPv4/TCP):
          Requested: bind(192.168.1.254, 4040) ..
             Actual: bind(127.0.0.1, 4444)
  Test case #2 (IPv4/UDP):
          Requested: bind(192.168.1.254, 4040) ..
             Actual: bind(127.0.0.1, 4444)
  Attached bind6 program.
  Test case #3 (IPv6/TCP):
          Requested: bind(face:b00c:1234:5678::abcd, 6060) ..
             Actual: bind(::1, 6666)
  Test case #4 (IPv6/UDP):
          Requested: bind(face:b00c:1234:5678::abcd, 6060) ..
             Actual: bind(::1, 6666)
  ### SUCCESS

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-31 02:15:30 +02:00
Andrey Ignatov
d7be143b67 libbpf: Support expected_attach_type at prog load
Support setting `expected_attach_type` at prog load time in both
`bpf/bpf.h` and `bpf/libbpf.h`.

Since both headers already have API to load programs, new functions are
added not to break backward compatibility for existing ones:
* `bpf_load_program_xattr()` is added to `bpf/bpf.h`;
* `bpf_prog_load_xattr()` is added to `bpf/libbpf.h`.

Both new functions accept structures, `struct bpf_load_program_attr` and
`struct bpf_prog_load_attr` correspondingly, where new fields can be
added in the future w/o changing the API.

Standard `_xattr` suffix is used to name the new API functions.

Since `bpf_load_program_name()` is not used as heavily as
`bpf_load_program()`, it was removed in favor of more generic
`bpf_load_program_xattr()`.

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-31 02:15:05 +02:00
Alexei Starovoitov
a0fe3e574b libbpf: add bpf_raw_tracepoint_open helper
add bpf_raw_tracepoint_open(const char *name, int prog_fd) api to libbpf

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-28 22:55:19 +02:00
David S. Miller
03fe2debbb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Fun set of conflict resolutions here...

For the mac80211 stuff, these were fortunately just parallel
adds.  Trivially resolved.

In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the
function phy_disable_interrupts() earlier in the file, whilst in
'net-next' the phy_error() call from this function was removed.

In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the
'rt_table_id' member of rtable collided with a bug fix in 'net' that
added a new struct member "rt_mtu_locked" which needs to be copied
over here.

The mlxsw driver conflict consisted of net-next separating
the span code and definitions into separate files, whilst
a 'net' bug fix made some changes to that moved code.

The mlx5 infiniband conflict resolution was quite non-trivial,
the RDMA tree's merge commit was used as a guide here, and
here are their notes:

====================

    Due to bug fixes found by the syzkaller bot and taken into the for-rc
    branch after development for the 4.17 merge window had already started
    being taken into the for-next branch, there were fairly non-trivial
    merge issues that would need to be resolved between the for-rc branch
    and the for-next branch.  This merge resolves those conflicts and
    provides a unified base upon which ongoing development for 4.17 can
    be based.

    Conflicts:
            drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f95
            (IB/mlx5: Fix cleanup order on unload) added to for-rc and
            commit b5ca15ad7e (IB/mlx5: Add proper representors support)
            add as part of the devel cycle both needed to modify the
            init/de-init functions used by mlx5.  To support the new
            representors, the new functions added by the cleanup patch
            needed to be made non-static, and the init/de-init list
            added by the representors patch needed to be modified to
            match the init/de-init list changes made by the cleanup
            patch.
    Updates:
            drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function
            prototypes added by representors patch to reflect new function
            names as changed by cleanup patch
            drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init
            stage list to match new order from cleanup patch
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23 11:31:58 -04:00
John Fastabend
0dcbbf6785 bpf: sockmap sample test for bpf_msg_pull_data
This adds an option to test the msg_pull_data helper. This
uses two options txmsg_start and txmsg_end to let the user
specify start and end bytes to pull.

The options can be used with txmsg_apply, txmsg_cork options
as well as with any of the basic tests, txmsg, txmsg_redir and
txmsg_drop (plus noisy variants) to run pull_data inline with
those tests. By giving user direct control over the variables
we can easily do negative testing as well as positive tests.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-19 21:14:41 +01:00
John Fastabend
468b3fdea8 bpf: sockmap sample support for bpf_msg_cork_bytes()
Add sample application support for the bpf_msg_cork_bytes helper. This
lets the user specify how many bytes each verdict should apply to.

Similar to apply_bytes() tests these can be run as a stand-alone test
when used without other options or inline with other tests by using
the txmsg_cork option along with any of the basic tests txmsg,
txmsg_redir, txmsg_drop.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-19 21:14:40 +01:00
John Fastabend
4c4c3c276c bpf: sockmap sample, add option to attach SK_MSG program
Add sockmap option to use SK_MSG program types.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-19 21:14:40 +01:00
John Fastabend
82a8616889 bpf: add map tests for BPF_PROG_TYPE_SK_MSG
Add map tests to attach BPF_PROG_TYPE_SK_MSG types to a sockmap.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-19 21:14:39 +01:00
Wanpeng Li
4d5422cea3 KVM: X86: Provide a capability to disable MWAIT intercepts
Allowing a guest to execute MWAIT without interception enables a guest
to put a (physical) CPU into a power saving state, where it takes
longer to return from than what may be desired by the host.

Don't give a guest that power over a host by default. (Especially,
since nothing prevents a guest from using MWAIT even when it is not
advertised via CPUID.)

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-16 22:03:51 +01:00
Song Liu
81f77fd0de bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID
test_stacktrace_build_id() is added. It accesses tracepoint urandom_read
with "dd" and "urandom_read" and gathers stack traces. Then it reads the
stack traces from the stackmap.

urandom_read is a statically link binary that reads from /dev/urandom.
test_stacktrace_build_id() calls readelf to read build ID of urandom_read
and compares it with build ID from the stackmap.

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-15 01:10:02 +01:00
Milind Chabbi
32ff77e8cc perf/core: Implement fast breakpoint modification via _IOC_MODIFY_ATTRIBUTES
Problem and motivation: Once a breakpoint perf event (PERF_TYPE_BREAKPOINT)
is created, there is no flexibility to change the breakpoint type
(bp_type), breakpoint address (bp_addr), or breakpoint length (bp_len). The
only option is to close the perf event and configure a new breakpoint
event. This inflexibility has a significant performance overhead. For
example, sampling-based, lightweight performance profilers (and also
concurrency bug detection tools),  monitor different addresses for a short
duration using PERF_TYPE_BREAKPOINT and change the address (bp_addr) to
another address or change the kind of breakpoint (bp_type) from  "write" to
a "read" or vice-versa or change the length (bp_len) of the address being
monitored. The cost of these modifications is prohibitive since it involves
unmapping the circular buffer associated with the perf event, closing the
perf event, opening another perf event and mmaping another circular buffer.

Solution: The new ioctl flag for perf events,
PERF_EVENT_IOC_MODIFY_ATTRIBUTES, introduced in this patch takes a pointer
to a struct perf_event_attr as an argument to update an old breakpoint
event with new address, type, and size. This facility allows retaining a
previous mmaped perf events ring buffer and avoids having to close and
reopen another perf event.

This patch supports only changing PERF_TYPE_BREAKPOINT event type; future
implementations can extend this feature. The patch replicates some of its
functionality of modify_user_hw_breakpoint() in
kernel/events/hw_breakpoint.c. modify_user_hw_breakpoint cannot be called
directly since perf_event_ctx_lock() is already held in _perf_ioctl().

Evidence: Experiments show that the baseline (not able to modify an already
created breakpoint) costs an order of magnitude (~10x) more than the
suggested optimization (having the ability to dynamically modifying a
configured breakpoint via ioctl). When the breakpoints typically do not
trap, the speedup due to the suggested optimization is ~10x; even when the
breakpoints always trap, the speedup is ~4x due to the suggested
optimization.

Testing: tests posted at
https://github.com/linux-contrib/perf_event_modify_bp demonstrate the
performance significance of this patch. Tests also check the functional
correctness of the patch.

Signed-off-by: Milind Chabbi <chabbi.milind@gmail.com>
[ Using modify_user_hw_breakpoint_check function. ]
[ Reformated PERF_EVENT_IOC_*, so the values are all in one column. ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <onestero@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20180312134548.31532-8-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-13 15:24:02 +01:00
David Howells
739d875dd6 mn10300: Remove the architecture
Remove the MN10300 arch as the hardware is defunct.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Masahiro Yamada <yamada.masahiro@socionext.com>
cc: linux-am33-list@redhat.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-09 23:19:56 +01:00
Jiri Olsa
e2091cedd5 perf tools: Add MEM_TOPOLOGY feature to perf data file
Adding MEM_TOPOLOGY feature to perf data file,
that will carry physical memory map and its
node assignments.

The format of data in MEM_TOPOLOGY is as follows:

  0 - version          | for future changes
  8 - block_size_bytes | /sys/devices/system/memory/block_size_bytes
 16 - count            | number of nodes

 For each node we store map of physical indexes for
 each node:

 32 - node id          | node index
 40 - size             | size of bitmap
 48 - bitmap           | bitmap of memory indexes that belongs to node
                       | /sys/devices/system/node/node<NODE>/memory<INDEX>

The MEM_TOPOLOGY could be displayed with following
report command:

  $ perf report --header-only -I
  ...
  # memory nodes (nr 1, block size 0x8000000):
  #    0 [7G]: 0-23,32-69

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-8-jolsa@kernel.org
[ Rename 'index' to 'idx', as this breaks the build in rhel5, 6 and other systems where this is used by glibc headers ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08 11:30:46 -03:00
Ingo Molnar
3f986eefc8 Merge branch 'perf/urgent' into perf/core, to resolve conflict
Conflicts:
	tools/perf/perf.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-07 09:23:12 +01:00
Arnaldo Carvalho de Melo
d976a6e9d9 tools headers: Sync copy of kvm UAPI headers
In 801e459a6f ("KVM: x86: Add a framework for supporting MSR-based
features") a new ioctl was introduced, which with this sync of the kvm
UAPI headers, makes 'perf trace' know about it:

  $ cd /tmp/build/perf/trace/beauty/generated/ioctl/
  $ diff -u kvm_ioctl_array.c.old kvm_ioctl_array.c
  --- /tmp/kvm_ioctl_array.c	2018-03-05 11:55:38.409145056 -0300
  +++ /tmp/build/perf/trace/beauty/generated/ioctl/kvm_ioctl_array.c	2018-03-05 11:56:17.456153501 -0300
  @@ -6,6 +6,7 @@
 	[0x04] = "GET_VCPU_MMAP_SIZE",
 	[0x05] = "GET_SUPPORTED_CPUID",
 	[0x09] = "GET_EMULATED_CPUID",
  +	[0x0a] = "GET_MSR_FEATURE_INDEX_LIST",
 	[0x40] = "SET_MEMORY_REGION",
 	[0x41] = "CREATE_VCPU",
 	[0x42] = "GET_DIRTY_LOG",

So when using 'perf trace -e ioctl' that will appear along with the
others, like in this excerpt of a system wide session:

  14.556 ( 0.006 ms): CPU 0/KVM/16077 ioctl(fd: 19<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
  14.565 ( 0.006 ms): CPU 0/KVM/16077 ioctl(fd: 19<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
  14.573 (         ): CPU 0/KVM/16077 ioctl(fd: 19<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) ...
  34.075 ( 0.016 ms): gnome-shell/2192 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_BUSY, arg: 0x7ffe4e73e850) = 0
  40.549 ( 0.012 ms): gnome-shell/2192 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_BUSY, arg: 0x7ffe4e73ece0) = 0
  40.625 ( 0.005 ms): gnome-shell/2192 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_BUSY, arg: 0x7ffe4e73e940) = 0
  40.632 ( 0.003 ms): gnome-shell/2192 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_MADVISE, arg: 0x7ffe4e73e9b0) = 0

This also silences the perf build header copy drift verifier:

  make: Entering directory '/home/acme/git/perf/tools/perf'
    BUILD:   Doing 'make -j4' parallel build
  Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-h31oz5g0mt1dh2s2ajq6o6no@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-05 11:56:40 -03:00
Ingo Molnar
7057bb975d Merge branch 'perf/urgent' into perf/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-17 11:39:28 +01:00
Ingo Molnar
f091f1d6a2 tools/headers: Synchronize kernel ABI headers, v4.16-rc1
Sync the following tooling headers with the latest kernel version:

  tools/arch/powerpc/include/uapi/asm/kvm.h
  tools/arch/x86/include/asm/cpufeatures.h
  tools/include/uapi/drm/i915_drm.h
  tools/include/uapi/linux/if_link.h
  tools/include/uapi/linux/kvm.h

All the changes are new ABI additions which don't impact their use
in existing tooling.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-15 10:01:46 -03:00
David S. Miller
437a4db66d Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2018-02-09

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Two fixes for BPF sockmap in order to break up circular map references
   from programs attached to sockmap, and detaching related sockets in
   case of socket close() event. For the latter we get rid of the
   smap_state_change() and plug into ULP infrastructure, which will later
   also be used for additional features anyway such as TX hooks. For the
   second issue, dependency chain is broken up via map release callback
   to free parse/verdict programs, all from John.

2) Fix a libbpf relocation issue that was found while implementing XDP
   support for Suricata project. Issue was that when clang was invoked
   with default target instead of bpf target, then various other e.g.
   debugging relevant sections are added to the ELF file that contained
   relocation entries pointing to non-BPF related sections which libbpf
   trips over instead of skipping them. Test cases for libbpf are added
   as well, from Jesper.

3) Various misc fixes for bpftool and one for libbpf: a small addition
   to libbpf to make sure it recognizes all standard section prefixes.
   Then, the Makefile in bpftool/Documentation is improved to explicitly
   check for rst2man being installed on the system as we otherwise risk
   installing empty man pages; the man page for bpftool-map is corrected
   and a set of missing bash completions added in order to avoid shipping
   bpftool where the completions are only partially working, from Quentin.

4) Fix applying the relocation to immediate load instructions in the
   nfp JIT which were missing a shift, from Jakub.

5) Two fixes for the BPF kernel selftests: handle CONFIG_BPF_JIT_ALWAYS_ON=y
   gracefully in test_bpf.ko module and mark them as FLAG_EXPECTED_FAIL
   in this case; and explicitly delete the veth devices in the two tests
   test_xdp_{meta,redirect}.sh before dismantling the netnses as when
   selftests are run in batch mode, then workqueue to handle destruction
   might not have finished yet and thus veth creation in next test under
   same dev name would fail, from Yonghong.

6) Fix test_kmod.sh to check the test_bpf.ko module path before performing
   an insmod, and fallback to modprobe. Especially the latter is useful
   when having a device under test that has the modules installed instead,
   from Naresh.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-09 14:05:10 -05:00
Jesper Dangaard Brouer
8c88181ed4 bpf: Sync kernel ABI header with tooling header for bpf_common.h
I recently fixed up a lot of commits that forgot to keep the tooling
headers in sync.  And then I forgot to do the same thing in commit
cb5f7334d4 ("bpf: add comments to BPF ld/ldx sizes"). Let correct
that before people notice ;-).

Lawrence did partly fix/sync this for bpf.h in commit d6d4f60c3a
("bpf: add selftest for tcpbpf").

Fixes: cb5f7334d4 ("bpf: add comments to BPF ld/ldx sizes")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-09 00:24:38 +01:00
Linus Torvalds
a2e5790d84 Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:

 - kasan updates

 - procfs

 - lib/bitmap updates

 - other lib/ updates

 - checkpatch tweaks

 - rapidio

 - ubsan

 - pipe fixes and cleanups

 - lots of other misc bits

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits)
  Documentation/sysctl/user.txt: fix typo
  MAINTAINERS: update ARM/QUALCOMM SUPPORT patterns
  MAINTAINERS: update various PALM patterns
  MAINTAINERS: update "ARM/OXNAS platform support" patterns
  MAINTAINERS: update Cortina/Gemini patterns
  MAINTAINERS: remove ARM/CLKDEV SUPPORT file pattern
  MAINTAINERS: remove ANDROID ION pattern
  mm: docs: add blank lines to silence sphinx "Unexpected indentation" errors
  mm: docs: fix parameter names mismatch
  mm: docs: fixup punctuation
  pipe: read buffer limits atomically
  pipe: simplify round_pipe_size()
  pipe: reject F_SETPIPE_SZ with size over UINT_MAX
  pipe: fix off-by-one error when checking buffer limits
  pipe: actually allow root to exceed the pipe buffer limits
  pipe, sysctl: remove pipe_proc_fn()
  pipe, sysctl: drop 'min' parameter from pipe-max-size converter
  kasan: rework Kconfig settings
  crash_dump: is_kdump_kernel can be boolean
  kernel/mutex: mutex_is_locked can be boolean
  ...
2018-02-06 22:15:42 -08:00