The usual mixed bag of new issues and ancient ones.
The fact so many are ADI is probably due to an uptick in upstreaming
effort from Analog + Baylibre meaning existing code is getting more eyes
on it. Hence it's a good sign not a reflection of inherent high bug
incidence!
Core and helper related
-----------------------
in kernel interfaces
- Fix missing application of scale to the integer part of
IIO_INT_PLUS_XXX value pairs when using the
iio_convert_raw_to_processed*() helper.
buffer-dmaengine
- Make sure to release DMA channel in error path.
Driver related
--------------
adi,ad-sigma-delta library
- Check irq-flags for the correct irq if multiple are provided.
adi,ad7124
- Wait after reset before reading the chip ID register.
- Compare only the relevant field when looking for an existing
config to reuse for a new channel.
- Fix an off by one in which channel config is being filled from
firmware.
adi,ad7173
- Fix missing vendor prefix in compatible strings.
- Fix wrong info for GPIO related bit positions for ad4114,ad4115 and ad4116.
adi,ad7606
- Drop incorrect check on frstdata when in serial mode, it only applies to
parallel mode.
adi,ad9834
- Check userspace input for frequency parameter to avoid div by zero.
invensense,mpu6050
- Avoid reading interrupt status on some older chips as it seems there
is a hardware problem that surfaces as a result of adding wake on
motion support to the driver (which these chips don't support).
ti,ads1119
- Fix incorrect IRQ flag (new driver so no firmware compatibility regression
issues with fixing this now).
-----BEGIN PGP SIGNATURE-----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=txr2
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-6.11a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for 6.11
The usual mixed bag of new issues and ancient ones.
The fact so many are ADI is probably due to an uptick in upstreaming
effort from Analog + Baylibre meaning existing code is getting more eyes
on it. Hence it's a good sign not a reflection of inherent high bug
incidence!
Core and helper related
-----------------------
in kernel interfaces
- Fix missing application of scale to the integer part of
IIO_INT_PLUS_XXX value pairs when using the
iio_convert_raw_to_processed*() helper.
buffer-dmaengine
- Make sure to release DMA channel in error path.
Driver related
--------------
adi,ad-sigma-delta library
- Check irq-flags for the correct irq if multiple are provided.
adi,ad7124
- Wait after reset before reading the chip ID register.
- Compare only the relevant field when looking for an existing
config to reuse for a new channel.
- Fix an off by one in which channel config is being filled from
firmware.
adi,ad7173
- Fix missing vendor prefix in compatible strings.
- Fix wrong info for GPIO related bit positions for ad4114,ad4115 and ad4116.
adi,ad7606
- Drop incorrect check on frstdata when in serial mode, it only applies to
parallel mode.
adi,ad9834
- Check userspace input for frequency parameter to avoid div by zero.
invensense,mpu6050
- Avoid reading interrupt status on some older chips as it seems there
is a hardware problem that surfaces as a result of adding wake on
motion support to the driver (which these chips don't support).
ti,ads1119
- Fix incorrect IRQ flag (new driver so no firmware compatibility regression
issues with fixing this now).
* tag 'iio-fixes-for-6.11a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: imu: inv_mpu6050: fix interrupt status read for old buggy chips
iio: adc: ad7173: fix GPIO device info
iio: adc: ad7124: fix DT configuration parsing
iio: adc: ad_sigma_delta: fix irq_flags on irq request
iio: adc: ads1119: Fix IRQ flags
iio: fix scale application in iio_convert_raw_to_processed_unlocked
iio: adc: ad7124: fix config comparison
iio: adc: ad7124: fix chip ID mismatch
iio: adc: ad7173: Fix incorrect compatible string
iio: buffer-dmaengine: fix releasing dma channel on error
iio: adc: ad7606: remove frstdata check for serial mode
staging: iio: frequency: ad9834: Validate frequency parameter value
Roger Quadros says:
====================
net: ethernet: ti: am65-cpsw: Fix XDP implementation
The XDP implementation on am65-cpsw driver is broken in many ways
and this series fixes it.
Below are the current issues that are being fixed:
1) The following XDP_DROP test from [1] stalls the interface after
250 packets.
~# xdb-bench drop -m native eth0
This is because new RX requests are never queued. Fix that.
2) The below XDP_TX test from [1] fails with a warning
[ 499.947381] XDP_WARN: xdp_update_frame_from_buff(line:277): Driver BUG: missing reserved tailroom
~# xdb-bench tx -m native eth0
Fix that by using PAGE_SIZE during xdp_init_buf().
3) In XDP_REDIRECT case only 1 packet was processed in rx_poll.
Fix it to process up to budget packets.
~# ./xdp-bench redirect -m native eth0 eth0
4) If number of TX queues are set to 1 we get a NULL pointer
dereference during XDP_TX.
~# ethtool -L eth0 tx 1
~# ./xdp-trafficgen udp -A <ipv6-src> -a <ipv6-dst> eth0 -t 2
Transmitting on eth0 (ifindex 2)
[ 241.135257] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030
5) Net statistics is broken for XDP_TX and XDP_REDIRECT
[1] xdp-tools suite https://github.com/xdp-project/xdp-tools
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
---
====================
Link: https://patch.msgid.link/20240829-am65-cpsw-xdp-v1-0-ff3c81054a5e@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We are not using ndev->stats for rx_packets and rx_bytes anymore.
Instead, we use per CPU stats which are collated in
am65_cpsw_nuss_ndo_get_stats().
Fix RX statistics for XDP_TX and XDP_REDIRECT cases.
Fixes: 8acacc40f7 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If number of TX queues are set to 1 we get a NULL pointer
dereference during XDP_TX.
~# ethtool -L eth0 tx 1
~# ./xdp-trafficgen udp -A <ipv6-src> -a <ipv6-dst> eth0 -t 2
Transmitting on eth0 (ifindex 2)
[ 241.135257] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030
Fix this by using actual TX queues instead of max TX queues
when picking the TX channel in am65_cpsw_ndo_xdp_xmit().
Fixes: 8acacc40f7 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The following XDP_DROP test from [1] stalls the interface after
250 packets.
~# xdb-bench drop -m native eth0
This is because new RX requests are never queued. Fix that.
The below XDP_TX test from [1] fails with a warning
[ 499.947381] XDP_WARN: xdp_update_frame_from_buff(line:277): Driver BUG: missing reserved tailroom
~# xdb-bench tx -m native eth0
Fix that by using PAGE_SIZE during xdp_init_buf().
In XDP_REDIRECT case only 1 packet was processed in rx_poll.
Fix it to process up to budget packets.
Fix all XDP error cases to call trace_xdp_exception() and drop the packet
in am65_cpsw_run_xdp().
[1] xdp-tools suite https://github.com/xdp-project/xdp-tools
Fixes: 8acacc40f7 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On HDMI connectors which use drm_bridge_connector and DRM_BRIDGE_OP_HDMI
IGT chokes on the max_bpc property in several kms_properties tests due
to the drm_bridge_connector failing to reset HDMI-related
properties.
Call __drm_atomic_helper_connector_hdmi_reset() if the
drm_bridge_connector has bridge_hdmi.
It is impossible to call this function from HDMI bridges, none of the
bridge callbacks correspond to the drm_connector_funcs::reset().
Fixes: 6b4468b0c6 ("drm/bridge-connector: implement glue code for HDMI connector")
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-3-daebde6d9857@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_bridge_connector is a "leaf" driver, belonging to the display
helper, rather than the "CRTC" drm_kms_helper module. Move the driver
to the drm/display and add necessary Kconfig selection clauses.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Kconfig symbols should not declare dependency on DRM_DISPLAY_HELPER.
Move all parts of DRM_DISPLAY_HELPER to an if DRM_DISPLAY_HELPER block.
It is not possible to make those symbols select DRM_DISPLAY_HELPER
because of the link issues when a part of the helper is selected to be
built-in, while other part is selected to be as module. In such a case
the modular part doesn't get built at all, leading to undefined symbols.
The only viable alternative is to split drm_display_helper.ko into
several small modules, each of them having their own dependencies.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-1-daebde6d9857@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The Partner PD Revision field in GET_CONNECTOR_CAPABILITY
data structure was introduced in UCSI v2.1. In
ucsi_check_connector_capability() the version was assumed to
be 2.0, and in ucsi_register_partner() the field is accessed
completely unconditionally.
Fixing the version in ucsi_check_connector_capability(), and
replacing the unconditional pd_revision assignment with a
direct call to ucsi_check_connector_capability() in
ucsi_register_port(). After this the revision is also
checked only if there is a PD contract.
Fixes: b9fccfdb4e ("usb: typec: ucsi: Get PD revision for partner")
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240830111645.2134301-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fix addresses STAR 9001285599, which only affects DWC_usb3 version
3.20a. The timer value for PM_LC_TIMER in DWC_usb3 3.20a for the Link
ECN changes is incorrect. If the PM TIMER ECN is enabled via GUCTL2[19],
the link compliance test (TD7.21) may fail. If the ECN is not enabled
(GUCTL2[19] = 0), the controller will use the old timer value (5us),
which is still acceptable for the link compliance test. Therefore, clear
GUCTL2[19] to pass the USB link compliance test: TD 7.21.
Cc: stable@vger.kernel.org
Signed-off-by: Faisal Hassan <quic_faisalh@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240829094502.26502-1-quic_faisalh@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When operating in High-Speed, it is observed that DSTS[USBLNKST] doesn't
update link state immediately after receiving the wakeup interrupt. Since
wakeup event handler calls the resume callbacks, there is a chance that
function drivers can perform an ep queue, which in turn tries to perform
remote wakeup from send_gadget_ep_cmd(STARTXFER). This happens because
DSTS[[21:18] wasn't updated to U0 yet, it's observed that the latency of
DSTS can be in order of milli-seconds. Hence avoid calling gadget_wakeup
during startxfer to prevent unnecessarily issuing remote wakeup to host.
Fixes: c36d8e947a ("usb: dwc3: gadget: put link to U0 before Start Transfer")
Cc: stable@vger.kernel.org
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240828064302.3796315-1-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently there is no way to apply quirk on device only if certain panel
model is installed. This patch implements such mechanism by adding new
quirk type intel_dpcd_quirk which contains also sink_oui and sink_device_id
fields and using also them to figure out if applying quirk is needed.
New intel_init_dpcd_quirks is added and called after drm_dp_read_desc with
proper sink device identity read from dpcdc.
v3:
- !mem_is_zero fixed to mem_is_zero
v2:
- instead of using struct intel_quirk add new struct intel_dpcd_quirk
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902064241.1020965-2-jouni.hogander@intel.com
(cherry picked from commit b3b9136990)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
- qca: If memdump doesn't work, re-enable IBS
- MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT
- Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE"
- MGMT: Ignore keys being loaded with invalid type
-----BEGIN PGP SIGNATURE-----
iQJNBAABCAA3FiEE7E6oRXp8w05ovYr/9JCA4xAyCykFAmbSQPUZHGx1aXoudm9u
LmRlbnR6QGludGVsLmNvbQAKCRD0kIDjEDILKUf/D/0WzFAkAAooewTaaUodK+4I
zh8Z0SjdWyPpvIsdKI3wjEFWXIqtmiG1J7K+26QhLE9VtMGUi5H9EaoFRVTNCYhD
IaF7anRTisqY9OeQPKUTikByZEUMJuaK3VPL8/8iQ9SaPvB2MZG5V1cFPijv1PZ5
mqv2SAFDKGHmhB6oiF3uYde8u02kuxHWYV0tr2sy4OBatgnLx5Alqg8iP3DyweJP
ylI3eeFx4q8WXFyrA7c+ilUUs6PrWoUYXZtDaJsC5E+Gj8WlKuj2SHPR72/qXNDc
RMxz+YgE2m/Hy4fIM5FrgCDf1n4LE0YRiOQasrZh+Ip+TAhgyP4qJiSZO34ajL9y
GW2haKVzoyuFIl93+wW9cLusqCM3AbHz/ICYs2pdsYtvqT1lZAKHgAEeDAFDhmJ0
/zrPdg5V2bgl99edrSmbmmopJHmuCn/tceGu3r/dDeqxEGXzVRLzJF1+3YKXj0V+
dVNgI3ZACrQ99F6Vx01sHl0YRb05NfYai9ccXwtFN1uRpj3WapL5qbN8lHpHCh6j
/sAyAWXWz3LnFwiqo7n5uZpS1S2TDmSvQR5WSFynYEb/36NmNPipdWdZt+KgfKLV
wlRitnP7tjidZNPZnmf3E7bAFDSZKB2m5hpl85Fm7FnCyZtC5pKMrSYvmKzSq70P
aZx5C6JowUdu6N+6G/xMEg==
=XxEn
-----END PGP SIGNATURE-----
Merge tag 'for-net-2024-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- qca: If memdump doesn't work, re-enable IBS
- MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT
- Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE"
- MGMT: Ignore keys being loaded with invalid type
* tag 'for-net-2024-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Ignore keys being loaded with invalid type
Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE"
Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT
Bluetooth: hci_sync: Introduce hci_cmd_sync_run/hci_cmd_sync_run_once
Bluetooth: qca: If memdump doesn't work, re-enable IBS
====================
Link: https://patch.msgid.link/20240830220300.1316772-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmbSPaoTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28b01hB/4taX+ezcqTmL0crMQ7N1JCLsWg8kax
A4PTh7Zksj7OPY142Zn3M9D2xyj+ZACQQ9+vSS04Ex+i3CaGPZw4eVk0scxDbU8z
gkotQTk8a/+8dHJG0HMkXoLrp50YECVF2SsaiUXclrfpPDd6WIRadcvf6TUdVsI5
Z7B9tyIad7SEYj8r0iDHje3k1GaYkEqp5mqaB38y5RsDiNXa0mO6uqkbTT8WgooL
KLc8ecB9/igpXIylQghEkfuWpsNAFSG6lZsblhL2/DlE9w5cmrdMo+oEd0+OkJTh
+iyPi6NVaSyW/whmwhePi3RsIsCazGGUG1mKkaLJoOTJDmAGvj8f3fAi
=mZ7/
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.11-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-08-30
The first patch is by Kuniyuki Iwashima for the CAN BCM protocol that
adds a missing proc entry removal when a device unregistered.
Simon Horman fixes the cleanup in the error cleanup path of the m_can
driver's open function.
Markus Schneider-Pargmann contributes 7 fixes for the m_can driver,
all related to the recently added IRQ coalescing support.
The next 2 patches are by me, target the mcp251xfd driver and fix ring
and coalescing configuration problems when switching from CAN-CC to
CAN-FD mode.
Simon Arlott's patch fixes a possible deadlock in the mcp251x driver.
The last patch is by Martin Jocic for the kvaser_pciefd driver and
fixes a problem with lost IRQs, which result in starvation, under high
load situations.
* tag 'linux-can-fixes-for-6.11-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: kvaser_pciefd: Use a single write when releasing RX buffers
can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open
can: mcp251xfd: mcp251xfd_ring_init(): check TX-coalescing configuration
can: mcp251xfd: fix ring configuration when switching from CAN-CC to CAN-FD mode
can: m_can: Limit coalescing to peripheral instances
can: m_can: Reset cached active_interrupts on start
can: m_can: disable_all_interrupts, not clear active_interrupts
can: m_can: Do not cancel timer from within timer
can: m_can: Remove m_can_rx_peripheral indirection
can: m_can: Remove coalesing disable in isr during suspend
can: m_can: Reset coalescing during suspend/resume
can: m_can: Release irq on error in m_can_open
can: bcm: Remove proc entry when dev is unregistered.
====================
Link: https://patch.msgid.link/20240830215914.1610393-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Call cifs_reconnect() to wake up processes waiting on negotiate
protocol to handle the case where server abruptly shut down and had no
chance to properly close the socket.
Simple reproducer:
ssh 192.168.2.100 pkill -STOP smbd
mount.cifs //192.168.2.100/test /mnt -o ... [never returns]
Cc: Rickard Andersson <rickaran@axis.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Btrfs rejects to mount a FS if it finds a block group with a broken write
pointer (e.g, unequal write pointers on two zones of RAID1 block group).
Since such case can happen easily with a power-loss or crash of a system,
we need to handle the case more gently.
Handle such block group by making it unallocatable, so that there will be
no writes into it. That can be done by setting the allocation pointer at
the end of allocating region (= block_group->zone_capacity). Then, existing
code handle zone_unusable properly.
Having proper zone_capacity is necessary for the change. So, set it as fast
as possible.
We cannot handle RAID0 and RAID10 case like this. But, they are anyway
unable to read because of a missing stripe.
Fixes: 265f7237dd ("btrfs: zoned: allow DUP on meta-data block groups")
Fixes: 568220fa96 ("btrfs: zoned: support RAID0/1/10 on top of raid stripe tree")
CC: stable@vger.kernel.org # 6.1+
Reported-by: HAN Yuwei <hrx@bupt.moe>
Cc: Xuefer <xuefer@gmail.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
FYI: I'm carrying this on perf-tools-next.
The previous attempt fixed the build on debian:experimental-x-mipsel,
but when building on a larger set of containers I noticed it broke the
build on some other 32-bit architectures such as:
42 7.87 ubuntu:18.04-x-arm : FAIL gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04)
builtin-daemon.c: In function 'cmd_session_list':
builtin-daemon.c:692:16: error: format '%llu' expects argument of type 'long long unsigned int', but argument 4 has type 'long int' [-Werror=format=]
fprintf(out, "%c%" PRIu64,
^~~~~
builtin-daemon.c:694:13:
csv_sep, (curr - daemon->start) / 60);
~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from builtin-daemon.c:3:0:
/usr/arm-linux-gnueabihf/include/inttypes.h:105:34: note: format string is defined here
# define PRIu64 __PRI64_PREFIX "u"
So lets cast that time_t (32-bit/64-bit) to uint64_t to make sure it
builds everywhere.
Fixes: 4bbe600293 ("perf daemon: Fix the build on 32-bit architectures")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/ZsPmldtJ0D9Cua9_@x1
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The 32-bit arm build system will complain:
tools/perf/util/python.c:75:28: error: field ‘sample’ has incomplete type
75 | struct perf_sample sample;
However, arm64 build system doesn't complain this.
The root cause is arm64 define "HAVE_KVM_STAT_SUPPORT := 1" in
tools/perf/arch/arm64/Makefile, but arm arch doesn't define this.
This will lead to kvm-stat.h include other header files on arm64 build
system, especially "util/sample.h" for util/python.c.
This will try to directly include "util/sample.h" for "util/python.c" to
avoid such build issue on arm platform.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Cc: imx@lists.linux.dev
Link: https://lore.kernel.org/r/20240819023403.201324-1-xu.yang_2@nxp.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The spinlock and rwlock use a single-element per-cpu array to track
current locks due to performance reason. But this means the key is
always available and it cannot simply account lock stats in the array
because some of them are invalid.
In fact, the contention_end() program in the BPF invalidates the entry
by setting the 'lock' value to 0 instead of deleting the entry for the
hashmap. So it should skip entries with the lock value of 0 in the
account_end_timestamp().
Otherwise, it'd have spurious high contention on an idle machine:
$ sudo perf lock con -ab -Y spinlock sleep 3
contended total wait max wait avg wait type caller
8 4.72 s 1.84 s 590.46 ms spinlock rcu_core+0xc7
8 1.87 s 1.87 s 233.48 ms spinlock process_one_work+0x1b5
2 1.87 s 1.87 s 933.92 ms spinlock worker_thread+0x1a2
3 1.81 s 1.81 s 603.93 ms spinlock tmigr_update_events+0x13c
2 1.72 s 1.72 s 861.98 ms spinlock tick_do_update_jiffies64+0x25
6 42.48 us 13.02 us 7.08 us spinlock futex_q_lock+0x2a
1 13.03 us 13.03 us 13.03 us spinlock futex_wake+0xce
1 11.61 us 11.61 us 11.61 us spinlock rcu_core+0xc7
I don't believe it has contention on a spinlock longer than 1 second.
After this change, it only reports some small contentions.
$ sudo perf lock con -ab -Y spinlock sleep 3
contended total wait max wait avg wait type caller
4 133.51 us 43.29 us 33.38 us spinlock tick_do_update_jiffies64+0x25
4 69.06 us 31.82 us 17.27 us spinlock process_one_work+0x1b5
2 50.66 us 25.77 us 25.33 us spinlock rcu_core+0xc7
1 28.45 us 28.45 us 28.45 us spinlock rcu_core+0xc7
1 24.77 us 24.77 us 24.77 us spinlock tmigr_update_events+0x13c
1 23.34 us 23.34 us 23.34 us spinlock raw_spin_rq_lock_nested+0x15
Fixes: b5711042a1 ("perf lock contention: Use per-cpu array map for spinlocks")
Reported-by: Xi Wang <xii@google.com>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20240828052953.1445862-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Commit 3e0bf9fde2 ("perf pmu: Restore full PMU name wildcard
support") adds a test case "PMU cmdline match" that covers PMU name
wildcard support provided by function perf_pmu__match(). The test works
with a wide range of supported combinations of PMU name matching but
omits the case that if the perf_pmu__match() cannot match the PMU name
to the wildcard, it tries to match its alias. However, this variable is
not set up, causing the test case to fail when run with subprocesses or
to segfault if run as a single process.
./perf test -vv 9
9: Sysfs PMU tests :
9.1: Parsing with PMU format directory : Ok
9.2: Parsing with PMU event : Ok
9.3: PMU event names : Ok
9.4: PMU name combining : Ok
9.5: PMU name comparison : Ok
9.6: PMU cmdline match : FAILED!
./perf test -F 9
9.1: Parsing with PMU format directory : Ok
9.2: Parsing with PMU event : Ok
9.3: PMU event names : Ok
9.4: PMU name combining : Ok
9.5: PMU name comparison : Ok
Segmentation fault (core dumped)
Initialize the PMU alias to null for all tests of perf_pmu__match()
as this functionality is not being tested and the alias matching works
exactly the same as the matching of the PMU name.
./perf test -F 9
9.1: Parsing with PMU format directory : Ok
9.2: Parsing with PMU event : Ok
9.3: PMU event names : Ok
9.4: PMU name combining : Ok
9.5: PMU name comparison : Ok
9.6: PMU cmdline match : Ok
Fixes: 3e0bf9fde2 ("perf pmu: Restore full PMU name wildcard support")
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: james.clark@arm.com
Cc: mpetlan@redhat.com
Cc: rstoyano@redhat.com
Link: https://lore.kernel.org/r/20240808103749.9356-1-vmolnaro@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The local extent changeset is passed to clear_record_extent_bits() where
it may have some additional memory dynamically allocated for ulist. When
qgroup is disabled, the memory is leaked because in this case the
changeset is not released upon __btrfs_qgroup_release_data() return.
Since the recorded contents of the changeset are not used thereafter, just
don't pass it.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Reported-by: syzbot+81670362c283f3dd889c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/000000000000aa8c0c060ade165e@google.com
Fixes: af0e2aab3b ("btrfs: qgroup: flush reservations during quota disable")
CC: stable@vger.kernel.org # 6.10+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: David Sterba <dsterba@suse.com>
PMO assumes that like timings can be synchronized, but DC only allows
this if the signal types match.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 29d3d6af43)
Cc: stable@vger.kernel.org
Backlight updates require aux and/or register access. Therefore, driver
needs to disallow IPS beforehand.
So, acquire the dc lock before calling into dc to update backlight - we
should be doing this regardless of IPS. Then, while the lock is held,
disallow IPS before calling into dc, then allow IPS afterwards (if it
was previously allowed).
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 988fe28626)
Cc: stable@vger.kernel.org # 6.10+
This adds allocation latency, but aligns better with user
expectations. The latency should improve with the drm buddy
clearing patches that Arun has been working on.
In addition this fixes the high CPU spikes seen when doing
wipe on release.
v2: always set AMDGPU_GEM_CREATE_VRAM_CLEARED (Christian)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3528
Fixes: a68c7eaa7a ("drm/amdgpu: Enable clear page functionality")
Acked-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
(cherry picked from commit 6c0a7c3c69)
Cc: stable@vger.kernel.org # 6.10.x
For mes11 old firmware has issue to map legacy queue,
add a flag to switch mes to map legacy queue.
Fixes: f9d8c5c785 ("drm/amdgpu/gfx: enable mes to map legacy queue support")
Reported-by: Andrew Worsley <amworsley@gmail.com>
Link: https://lists.freedesktop.org/archives/amd-gfx/2024-August/112773.html
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 52491d97aa)
[Why]
DCN IPS interoperates with other system idle power features, such as
Zstates.
On DCN35, there is a known issue where system Z8 + DCN IPS2 causes a
hard hang. We observe this on systems where the SBIOS allows Z8.
Though there is a SBIOS fix, there's no guarantee that users will get it
any time soon, or even install it. A workaround is needed to prevent
this from rearing its head in the wild.
[How]
For DCN35, check the pmfw version to determine whether the SBIOS has the
fix. If not, set IPS1+RCG as the deepest possible state in all cases
except for s0ix and display off (DPMS). Otherwise, enable all IPS
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 28d43d0895)
Cc: stable@vger.kernel.org
This reverts commit 7f0343b7b8.
We are going to revert commit 166a490f59 ("wifi: ath11k: support hibernation"), on
which this commit depends. With that commit reverted, this one is not needed any
more, so revert this commit first.
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240830073420.5790-2-quic_bqiang@quicinc.com
Until recently, KVM_CAP_READONLY_MEM was unconditionally supported on
x86, but this is no longer the case for SEV-ES and SEV-SNP VMs.
When KVM_CHECK_EXTENSION is invoked on a VM, only advertise
KVM_CAP_READONLY_MEM when it's actually supported.
Fixes: 66155de93b ("KVM: x86: Disallow read-only memslots for SEV-ES and SEV-SNP (and TDX)")
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Signed-off-by: Tom Dohrmann <erbse.13@gmx.de>
Message-ID: <20240902144219.3716974-1-erbse.13@gmx.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fixup missed comments from the REMOVED_SPTE=>FROZEN_SPTE rename.
- Ensure a root is successfully loaded when pre-faulting SPTEs.
- Grab kvm->srcu when handling KVM_SET_VCPU_EVENTS to guard against accessing
memslots if toggling SMM happens to force a VM-Exit.
- Emulate MSR_{FS,GS}_BASE on SVM even though interception is always disabled,
so that KVM does the right thing if KVM's emulator encounters {RD,WR}MSR.
- Explicitly clear BUS_LOCK_DETECT from KVM's caps on AMD, as KVM doesn't yet
virtualize BUS_LOCK_DETECT on AMD.
- Cleanup the help message for CONFIG_KVM_AMD_SEV, and call out that KVM now
supports SEV-SNP too.
-----BEGIN PGP SIGNATURE-----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=mCer
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.11-rcN' of https://github.com/kvm-x86/linux into kvm-master
KVM x86 fixes for 6.11
- Fixup missed comments from the REMOVED_SPTE=>FROZEN_SPTE rename.
- Ensure a root is successfully loaded when pre-faulting SPTEs.
- Grab kvm->srcu when handling KVM_SET_VCPU_EVENTS to guard against accessing
memslots if toggling SMM happens to force a VM-Exit.
- Emulate MSR_{FS,GS}_BASE on SVM even though interception is always disabled,
so that KVM does the right thing if KVM's emulator encounters {RD,WR}MSR.
- Explicitly clear BUS_LOCK_DETECT from KVM's caps on AMD, as KVM doesn't yet
virtualize BUS_LOCK_DETECT on AMD.
- Cleanup the help message for CONFIG_KVM_AMD_SEV, and call out that KVM now
supports SEV-SNP too.
The BIOS can choose to return no event data in response to a
WMI event, so the ACPI object passed to the WMI notify handler
can be NULL.
Check for such a situation and ignore the event in such a case.
Fixes: 23902f98f8 ("hwmon: add HP WMI Sensors driver")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Message-ID: <20240901031055.3030-2-W_Armin@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based
on the alias from of_device_id table.
Fixes: 7687a5b0ee ("gpio: modepin: Add driver support for modepin GPIO controller")
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240902115848.904227-1-liaochen4@huawei.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Call rtnl_unlock() on this error path, before returning.
Fixes: bc23aa949a ("igc: Add pcie error handler support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://patch.msgid.link/20240831094231.795024-1-liaochen4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When debug_fence_free() is unused
(CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS=n), it prevents kernel builds
with clang, `make W=1` and CONFIG_WERROR=y:
.../i915_sw_fence.c:118:20: error: unused function 'debug_fence_free' [-Werror,-Wunused-function]
118 | static inline void debug_fence_free(struct i915_sw_fence *fence)
| ^~~~~~~~~~~~~~~~
Fix this by marking debug_fence_free() with __maybe_unused.
See also commit 6863f5643d ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Fixes: fc1584059d ("drm/i915: Integrate i915_sw_fence with debugobjects")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 8be4dce5ea)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When debug_fence_init_onstack() is unused (CONFIG_DRM_I915_SELFTEST=n),
it prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y:
.../i915_sw_fence.c:97:20: error: unused function 'debug_fence_init_onstack' [-Werror,-Wunused-function]
97 | static inline void debug_fence_init_onstack(struct i915_sw_fence *fence)
| ^~~~~~~~~~~~~~~~~~~~~~~~
Fix this by marking debug_fence_init_onstack() with __maybe_unused.
See also commit 6863f5643d ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Fixes: 214707fc2c ("drm/i915/selftests: Wrap a timer into a i915_sw_fence")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 5bf472058f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
On ilk/snb the pipe may be configured to place the LUT before or
after the CSC depending on various factors, but as there is only
one LUT (no split mode like on IVB+) we only advertise a gamma_lut
and no degamma_lut in the uapi to avoid confusing userspace.
This can cause a problem during readout if the VBIOS/GOP enabled
the LUT in the pre CSC configuration. The current code blindly
assigns the results of the readout to the degamma_lut, which will
cause a failure during the next atomic_check() as we aren't expecting
anything to be in degamma_lut since it's not visible to userspace.
Fix the problem by assigning whatever LUT we read out from the
hardware into gamma_lut.
Cc: stable@vger.kernel.org
Fixes: d2559299d3 ("drm/i915: Make ilk_read_luts() capable of degamma readout")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11608
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240710124137.16773-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
(cherry picked from commit 33eca84db6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
If the GSC FW fails to load the GSC HW hangs permanently; the only ways
to recover it are FLR or D3cold entry, with the former only being
supported on driver unload and the latter only on DGFX, for which we
don't need to load the GSC. Therefore, if GSC fails to load there is no
need to try again because the HW is stuck in the error state and the
submission to load the FW would just hang the GSCCS.
Note that, due to wa_14015076503, on MTL the GuC escalates all GSCCS
hangs to full GT resets, which would trigger a new attempt to load the
GSC FW in the post-reset HW re-init; this issue is also fixed by not
attempting to load the GSC FW after an error.
Fixes: 15bd4a67e9 ("drm/i915/gsc: GSC firmware loading")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v6.3+
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820215952.2290807-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 03ded4d432)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
routine as it is broken but also unused (Daniel Lezcano)
- Fix return -ETIME when delta exceeds INT_MAX and the next event not
taking effect sometimes (Jacky Bai)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmbVf98ACgkQqDIjiipP
6E+K3wf/RixAgb3Hy9qRoJxu6sAwOvgxERCAsZae/byvZoaY9JG9FV4uDO0tqewl
7ph0A3yoVm/8xUHm04tLfvxtU1KzcpHzjc3zF3tlQr91zpbOxxKOvGLWGZmTwqPI
eAkp7+VSWkxV6Apa0pOZkPc3udNKAlzgw3CRYdFt8P88kMlNfgN7akG4ChsHaD7M
mE7s6kXiyxz3dkv6joaVVMfrSPKnsBOfxktroQPy/R6OQkDZTV0sFg7MPR9jEhQl
U5aUtgYMJfz88nFv4/h/j6KAejByFxWof0D7Bv2veQDl0baUq84zmRstHDsKc7IL
r1GsVZZedAV+MDu9DEST6xtUXfpX0Q==
=W07G
-----END PGP SIGNATURE-----
Merge tag 'timers-v6.11-rc7' of https://git.linaro.org/people/daniel.lezcano/linux into timers/urgent
Pull clocksource driver fixes from Daniel Lezcano:
- Remove percpu irq related code in the timer-of initialization
routine as it is broken but also unused (Daniel Lezcano)
- Fix return -ETIME when delta exceeds INT_MAX and the next event not
taking effect sometimes (Jacky Bai)
Link: https://lore.kernel.org/all/d0e93dbd-b796-4726-b38c-089b685591c9@linaro.org
This is a clear use-after-free error. We remove it, and rely on checking
the return code of vcap_del_rule.
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/kernel-janitors/7bffefc6-219a-4f71-baa0-ad4526e5c198@kili.mountain/
Fixes: c956b9b318 ("net: microchip: sparx5: Adding KUNIT tests of key/action values in VCAP API")
Signed-off-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I am retiring from the project, so removing myself from MAINTAINERS as I won't
have time to dedicate to it.
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Link: https://lore.kernel.org/r/20240828211117.9422-2-wedsonaf@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
On X1E80100, GPIO interrupts for wakeup-capable pins have been broken since
the introduction of the pinctrl driver. This prevents keyboard and touchpad
from working on most of the X1E laptops. So far we have worked around this
by manually building a kernel with the "wakeup-parent" removed from the
pinctrl node in the device tree, but we cannot expect all users to do that.
Implement a similar workaround in the driver by clearing the wakeirq_map
for X1E80100. This avoids using the PDC wakeup parent for all GPIOs
and handles the interrupts directly in the pinctrl driver instead.
The PDC driver needs additional changes to support X1E80100 properly.
Adding a workaround separately first allows to land the necessary PDC
changes through the normal release cycle, while still solving the more
critical problem with keyboard and touchpad on the current stable kernel
versions. Bypassing the PDC is enough for now, because we have not yet
enabled the deep idle states where using the PDC becomes necessary.
Cc: stable@vger.kernel.org
Fixes: 05e4941d97 ("pinctrl: qcom: Add X1E80100 pinctrl driver")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/20240830-x1e80100-bypass-pdc-v1-1-d4c00be0c3e3@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The value written into the TPM CnV can only be updated into the hardware
when the counter increases. Additional writes to the CnV write buffer are
ignored until the register has been updated. Therefore, we need to check
if the CnV has been updated before continuing. This may require waiting for
1 counter cycle in the worst case.
Cc: stable@vger.kernel.org
Fixes: 059ab7b82e ("clocksource/drivers/imx-tpm: Add imx tpm timer support")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240725193355.1436005-2-Frank.Li@nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
In tpm_set_next_event(delta), return -ETIME by wrong cast to int when delta
is larger than INT_MAX.
For example:
tpm_set_next_event(delta = 0xffff_fffe)
{
...
next = tpm_read_counter(); // assume next is 0x10
next += delta; // next will 0xffff_fffe + 0x10 = 0x1_0000_000e
now = tpm_read_counter(); // now is 0x10
...
return (int)(next - now) <= 0 ? -ETIME : 0;
^^^^^^^^^^
0x1_0000_000e - 0x10 = 0xffff_fffe, which is -2 when
cast to int. So return -ETIME.
}
To fix this, introduce a 'prev' variable and check if 'now - prev' is
larger than delta.
Cc: stable@vger.kernel.org
Fixes: 059ab7b82e ("clocksource/drivers/imx-tpm: Add imx tpm timer support")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240725193355.1436005-1-Frank.Li@nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
GCC's named address space checks errors out with:
drivers/clocksource/timer-of.c: In function ‘timer_of_irq_exit’:
drivers/clocksource/timer-of.c:29:46: error: passing argument 2 of
‘free_percpu_irq’ from pointer to non-enclosed address space
29 | free_percpu_irq(of_irq->irq, clkevt);
| ^~~~~~
In file included from drivers/clocksource/timer-of.c:8:
./include/linux/interrupt.h:201:43: note: expected ‘__seg_gs void *’
but argument is of type ‘struct clock_event_device *’
201 | extern void free_percpu_irq(unsigned int, void __percpu *);
| ^~~~~~~~~~~~~~~
drivers/clocksource/timer-of.c: In function ‘timer_of_irq_init’:
drivers/clocksource/timer-of.c:74:51: error: passing argument 4 of
‘request_percpu_irq’ from pointer to non-enclosed address space
74 | np->full_name, clkevt) :
| ^~~~~~
./include/linux/interrupt.h:190:56: note: expected ‘__seg_gs void *’
but argument is of type ‘struct clock_event_device *’
190 | const char *devname, void __percpu *percpu_dev_id)
Sparse warns about:
timer-of.c:29:46: warning: incorrect type in argument 2 (different address spaces)
timer-of.c:29:46: expected void [noderef] __percpu *
timer-of.c:29:46: got struct clock_event_device *clkevt
timer-of.c:74:51: warning: incorrect type in argument 4 (different address spaces)
timer-of.c:74:51: expected void [noderef] __percpu *percpu_dev_id
timer-of.c:74:51: got struct clock_event_device *clkevt
It appears the code is incorrect as reported by Uros Bizjak:
"The referred code is questionable as it tries to reuse
the clkevent pointer once as percpu pointer and once as generic
pointer, which should be avoided."
This change removes the percpu related code as no drivers is using it.
[Daniel: Fixed the description]
Fixes: dc11bae785 ("clocksource/drivers: Add timer-of common init routine")
Reported-by: Uros Bizjak <ubizjak@gmail.com>
Tested-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20240819100335.2394751-1-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Currently while defining `THIS_MODULE` symbol in `module!()`, the
pointer used to construct `ThisModule` is derived from an immutable
reference of `__this_module`, which means the pointer doesn't have
the provenance for writing, and that means any write to that pointer
is UB regardless of data races or not. However, the usage of
`THIS_MODULE` includes passing this pointer to functions that may write
to it (probably in unsafe code), and this will create soundness issues.
One way to fix this is using `addr_of_mut!()` but that requires the
unstable feature "const_mut_refs". So instead of `addr_of_mut()!`,
an extern static `Opaque` is used here: since `Opaque<T>` is transparent
to `T`, an extern static `Opaque` will just wrap the C symbol (defined
in a C compile unit) in an `Opaque`, which provides a pointer with
writable provenance via `Opaque::get()`. This fix the potential UBs
because of pointer provenance unmatched.
Reported-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Closes: https://rust-for-linux.zulipchat.com/#narrow/stream/x/topic/x/near/465412664
Fixes: 1fbde52bde ("rust: add `macros` crate")
Cc: stable@vger.kernel.org # 6.6.x: be2ca1e039: ("rust: types: Make Opaque::get const")
Link: https://lore.kernel.org/r/20240828180129.4046355-1-boqun.feng@gmail.com
[ Fixed two typos, reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
