trace_uprobe->nhit counter is not incremented atomically, so its value
is questionable in when uprobe is hit on multiple CPUs simultaneously.
Also, doing this shared counter increment across many CPUs causes heavy
cache line bouncing, limiting uprobe/uretprobe performance scaling with
number of CPUs.
Solve both problems by making this a per-CPU counter.
Link: https://lore.kernel.org/all/20240813203409.3985398-1-andrii@kernel.org/
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
When the driver needs to send new packets to the device, it always
queues the new sk_buffs into an intermediate queue (send_pkt_queue)
and schedules a worker (send_pkt_work) to then queue them into the
virtqueue exposed to the device.
This increases the chance of batching, but also introduces a lot of
latency into the communication. So we can optimize this path by
adding a fast path to be taken when there is no element in the
intermediate queue, there is space available in the virtqueue,
and no other process that is sending packets (tx_lock held).
The following benchmarks were run to check improvements in latency and
throughput. The test bed is a host with Intel i7-10700KF CPU @ 3.80GHz
and L1 guest running on QEMU/KVM with vhost process and all vCPUs
pinned individually to pCPUs.
- Latency
Tool: Fio version 3.37-56
Mode: pingpong (h-g-h)
Test runs: 50
Runtime-per-test: 50s
Type: SOCK_STREAM
In the following fio benchmark (pingpong mode) the host sends
a payload to the guest and waits for the same payload back.
fio process pinned both inside the host and the guest system.
Before: Linux 6.9.8
Payload 64B:
1st perc. overall 99th perc.
Before 12.91 16.78 42.24 us
After 9.77 13.57 39.17 us
Payload 512B:
1st perc. overall 99th perc.
Before 13.35 17.35 41.52 us
After 10.25 14.11 39.58 us
Payload 4K:
1st perc. overall 99th perc.
Before 14.71 19.87 41.52 us
After 10.51 14.96 40.81 us
- Throughput
Tool: iperf-vsock
The size represents the buffer length (-l) to read/write
P represents the number of parallel streams
P=1
4K 64K 128K
Before 6.87 29.3 29.5 Gb/s
After 10.5 39.4 39.9 Gb/s
P=2
4K 64K 128K
Before 10.5 32.8 33.2 Gb/s
After 17.8 47.7 48.5 Gb/s
P=4
4K 64K 128K
Before 12.7 33.6 34.2 Gb/s
After 16.9 48.1 50.5 Gb/s
The performance improvement is related to this optimization,
I used a ebpf kretprobe on virtio_transport_send_skb to check
that each packet was sent directly to the virtqueue
Co-developed-by: Marco Pinna <marco.pinn95@gmail.com>
Signed-off-by: Marco Pinna <marco.pinn95@gmail.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Message-Id: <20240730-pinna-v4-2-5c9179164db5@outlook.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Preliminary patch to introduce an optimization to the
enqueue system.
All the code used to enqueue a packet into the virtqueue
is removed from virtio_transport_send_pkt_work()
and moved to the new virtio_transport_send_skb() function.
Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Marco Pinna <marco.pinn95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240730-pinna-v4-1-5c9179164db5@outlook.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This 'struct kobj_type' is not modified. It is only used in
kobject_init_and_add() which takes a 'const struct kobj_type *ktype'
parameter.
Constifying this structure and moving it to a read-only section,
and this can increase over all security.
```
[Before]
text data bss dec hex filename
5974 1008 96 7078 1ba6 drivers/firmware/qemu_fw_cfg.o
[After]
text data bss dec hex filename
6038 944 96 7078 1ba6 drivers/firmware/qemu_fw_cfg.o
```
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Message-Id: <20240904011743.2010319-1-lihongbo22@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, when a new MR is set up, the old MR is deleted. MR deletion
is about 30-40% the time of MR creation. As deleting the old MR is not
important for the process of setting up the new MR, this operation
can be postponed.
This series adds a workqueue that does MR garbage collection at a later
point. If the MR lock is taken, the handler will back off and
reschedule. The exception during shutdown: then the handler must
not postpone the work.
Note that this is only a speculative optimization: if there is some
mapping operation that is triggered while the garbage collector handler
has the lock taken, this operation it will have to wait for the handler
to finish.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240830105838.2666587-9-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There's currently not a lot of action happening during
the init/destroy of MR resources. But more will be added
in the upcoming patches.
As the mr mutex lock init/destroy has been moved to these
new functions, the lifetime has now shifted away from
mlx5_vdpa_alloc_resources() / mlx5_vdpa_free_resources()
into these new functions. However, the lifetime at the
outer scope remains the same:
mlx5_vdpa_dev_add() / mlx5_vdpa_dev_free()
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240830105838.2666587-8-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that the mr resources have their own namespace in the
struct, give the lock a clearer name.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240830105838.2666587-7-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Group all mapping related resources into their own structure.
Upcoming patches will add more members in this new structure.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240830105838.2666587-6-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A followup patch will use this name for something else.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240830105838.2666587-5-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the async interface to issue MTT MKEY deletion.
This makes destroy_user_mr() on average 8x times faster.
This number is also dependent on the size of the MR being
deleted.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240830105838.2666587-4-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the async interface to issue MTT MKEY creation.
Extra care is taken at the allocation of FW input commands
due to the MTT tables having variable sizes depending on
MR.
The indirect MKEY is still created synchronously at the
end as the direct MKEYs need to be filled in.
This makes create_user_mr() 3-5x faster, depending on
the size of the MR.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240830105838.2666587-3-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio-vsock driver is already under VM SOCKETS (AF_VSOCK),
managed pricipally with the net tree, and VIRTIO AND VHOST
VSOCK DRIVER. However, changes that only affect the virtio part
usually go with Michael's tree, so let's also put the driver in
the VIRTIO CORE section to have its maintainers in CC for changes
to the virtio-vsock driver.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240829143757.85844-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Introduce sysfs entries to provide visibility to the multiple queues
used by the Virtio FS device. This enhancement allows users to query
information about these queues.
Specifically, add two sysfs entries:
1. Queue name: Provides the name of each queue (e.g. hiprio/requests.8).
2. CPU list: Shows the list of CPUs that can process requests for each
queue.
The CPU list feature is inspired by similar functionality in the block
MQ layer, which provides analogous sysfs entries for block devices.
These new sysfs entries will improve observability and aid in debugging
and performance tuning of Virtio FS devices.
Reviewed-by: Idan Zach <izach@nvidia.com>
Reviewed-by: Shai Malin <smalin@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Message-Id: <20240825130716.9506-2-mgurtovoy@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a new helper function virtio_fs_put_locked to encapsulate the
common pattern of releasing a virtio_fs reference while holding a lock.
The existing virtio_fs_put helper will be used to release a virtio_fs
reference while not holding a lock.
Also add an assertion in case the lock is not taken when it should.
Reviewed-by: Idan Zach <izach@nvidia.com>
Reviewed-by: Shai Malin <smalin@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Message-Id: <20240825130716.9506-1-mgurtovoy@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
There is no caller and implementation in tree.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Message-Id: <20240819140930.122019-1-yuehaibing@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Zhu Lingshan <lingshan.zhu@kernel.org>
Reviewed-by: Shannon Nelson <<a href="mailto:shannon.nelson@amd.com" target="_blank">shannon.nelson@amd.com</a>><br>
Reviewed-by: Zhu Lingshan <lingshan.zhu@kernel.org>
change_num_qps() is still suspending/resuming VQs one by one.
This change switches to parallel suspend/resume.
When increasing the number of queues the flow has changed a bit for
simplicity: the setup_vq() function will always be called before
resume_vqs(). If the VQ is initialized, setup_vq() will exit early. If
the VQ is not initialized, setup_vq() will create it and resume_vqs()
will resume it.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Message-Id: <20240816090159.1967650-11-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
change_num_qps() has a lot of multiplications by 2 to convert
the number of VQ pairs to number of VQs. This patch simplifies
the code by doing the VQP -> VQ count conversion at the beginning
in a variable.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Message-Id: <20240816090159.1967650-10-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Unregistering notifiers is a costly operation. Instead of removing
the notifiers during device suspend and adding them back at resume,
simply ignore the call when the device is suspended.
At resume time call queue_link_work() to make sure that the device state
is propagated in case there were changes.
For 1 vDPA device x 32 VQs (16 VQPs) attached to a large VM (256 GB RAM,
32 CPUs x 2 threads per core), the device suspend time is reduced from
~13 ms to ~2.5 ms.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240816090159.1967650-9-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Currently device resume works on vqs serially. Building up on previous
changes that converted vq operations to the async api, this patch
parallelizes the device resume.
For 1 vDPA device x 32 VQs (16 VQPs) attached to a large VM (256 GB RAM,
32 CPUs x 2 threads per core), the device resume time is reduced from
~16 ms to ~4.5 ms.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240816090159.1967650-8-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Currently device suspend works on vqs serially. Building up on previous
changes that converted vq operations to the async api, this patch
parallelizes the device suspend:
1) Suspend all active vqs parallel.
2) Query suspended vqs in parallel.
For 1 vDPA device x 32 VQs (16 VQPs) attached to a large VM (256 GB RAM,
32 CPUs x 2 threads per core), the device suspend time is reduced from
~37 ms to ~13 ms.
A later patch will remove the link unregister operation which will make
it even faster.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240816090159.1967650-7-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Switch firmware vq modify command to be issued via the async API to
allow future parallelization. The new refactored function applies the
modify on a range of vqs and waits for their execution to complete.
For now the command is still used in a serial fashion. A later patch
will switch to modifying multiple vqs in parallel.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Message-Id: <20240816090159.1967650-6-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Switch firmware vq query command to be issued via the async API to
allow future parallelization.
For now the command is still serial but the infrastructure is there
to issue commands in parallel, including ratelimiting the number
of issued async commands to firmware.
A later patch will switch to issuing more commands at a time.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Message-Id: <20240816090159.1967650-5-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Introduce a new function mlx5_vdpa_exec_async_cmds() which
wraps the mlx5_core async firmware command API in a way
that will be used to parallelize certain operation in this
driver.
The wrapper deals with the case when mlx5_cmd_exec_cb() returns
EBUSY due to the command being throttled.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Message-Id: <20240816090159.1967650-4-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
mlx5_vdpa_err() was missing. This patch adds it and uses it in the
necessary places.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240816090159.1967650-3-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Currently, commands that qualify as throttled can't be used via the
async API. That's due to the fact that the throttle semaphore can sleep
but the async API can't.
This patch allows throttling in the async API by using the tentative
variant of the semaphore and upon failure (semaphore at 0) returns EBUSY
to signal to the caller that they need to wait for the completion of
previously issued commands.
Furthermore, make sure that the semaphore is released in the callback.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Message-Id: <20240816090159.1967650-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
This reverts commit ba6353748e.
The series is being reverted before -rc1 as there are still reports of
lockups on shutdown, so it's not quite ready for "prime time."
Reported-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://lore.kernel.org/r/ZvMkkhyJrohaajuk@skv.local
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Jeffery <djeffery@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 95dc756525.
The series is being reverted before -rc1 as there are still reports of
lockups on shutdown, so it's not quite ready for "prime time."
Reported-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://lore.kernel.org/r/ZvMkkhyJrohaajuk@skv.local
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Jeffery <djeffery@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 8064952c65.
The series is being reverted before -rc1 as there are still reports of
lockups on shutdown, so it's not quite ready for "prime time."
Reported-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://lore.kernel.org/r/ZvMkkhyJrohaajuk@skv.local
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Jeffery <djeffery@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit ba82e10c3c.
The series is being reverted before -rc1 as there are still reports of
lockups on shutdown, so it's not quite ready for "prime time."
Reported-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://lore.kernel.org/r/ZvMkkhyJrohaajuk@skv.local
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Jeffery <djeffery@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 4f2c346e62.
The series is being reverted before -rc1 as there are still reports of
lockups on shutdown, so it's not quite ready for "prime time."
Reported-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://lore.kernel.org/r/ZvMkkhyJrohaajuk@skv.local
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Jeffery <djeffery@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
intel_dp_init_connector() is no place for detecting stuff via
DPCD (except perhaps for eDP). Move the colorimetry stuff into
a more appropriate place.
Cc: Jouni Högander <jouni.hogander@intel.com>
Fixes: 00076671a6 ("drm/i915/display: Move colorimetry_support from intel_psr to intel_dp")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918190441.29071-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
(cherry picked from commit 35dba4834b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
On PVH dom0, when passthrough a device to domU, QEMU and xl tools
want to use gsi number to do pirq mapping, see QEMU code
xen_pt_realize->xc_physdev_map_pirq, and xl code
pci_add_dm_done->xc_physdev_map_pirq, but in current codes, the gsi
number is got from file /sys/bus/pci/devices/<sbdf>/irq, that is
wrong, because irq is not equal with gsi, they are in different
spaces, so pirq mapping fails.
And in current linux codes, there is no method to get gsi
for userspace.
For above purpose, record gsi of pcistub devices when init
pcistub and add a new syscall into privcmd to let userspace
can get gsi when they have a need.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-ID: <20240924061437.2636766-4-Jiqian.Chen@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
In PVH dom0, the gsis don't get registered, but the gsi of
a passthrough device must be configured for it to be able to be
mapped into a domU.
When assigning a device to passthrough, proactively setup the gsi
of the device during that process.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-ID: <20240924061437.2636766-3-Jiqian.Chen@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
When device on dom0 side has been reset, the vpci on Xen side
won't get notification, so that the cached state in vpci is
all out of date with the real device state.
To solve that problem, add a new function to clear all vpci
device state when device is reset on dom0 side.
And call that function in pcistub_init_device. Because when
using "pci-assignable-add" to assign a passthrough device in
Xen, it will reset passthrough device and the vpci state will
out of date, and then device will fail to restore bar state.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-ID: <20240924061437.2636766-2-Jiqian.Chen@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Any non-posted read should flush the previous write, so we don't
necessarily need to read back the value we just wrote. I've found at
least some controllers that respond with 0 for short moments after
writing the CC register with EN (enable) cleared, so the read-back is
overwriting our valid ctrl_config value and ends up breaking on the
subsequent enabling.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Commit 1e48b34c9b ("nvme: split off TLS sysfs attributes into a
separate group") introduced the struct attribute array nvme_tls_attrs.
However, the array was not null terminated and caused BUG KASAN global-
out-of-bounds. To avoid the BUG, null terminate the array.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-nvme/jhllwfxcedrcxcnbajwl4x2l2ujcqowqcd4ps574zrafrqhjna@f4icvecutekm/
Fixes: 1e48b34c9b ("nvme: split off TLS sysfs attributes into a separate group")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
During repetitive namespace remapping operations on the target the
namespace might have changed between the time the initial scan
was performed, and partition scan was invoked by device_add_disk()
in nvme_mpath_set_live(). We then end up with a stuck scanning process:
[<0>] folio_wait_bit_common+0x12a/0x310
[<0>] filemap_read_folio+0x97/0xd0
[<0>] do_read_cache_folio+0x108/0x390
[<0>] read_part_sector+0x31/0xa0
[<0>] read_lba+0xc5/0x160
[<0>] efi_partition+0xd9/0x8f0
[<0>] bdev_disk_changed+0x23d/0x6d0
[<0>] blkdev_get_whole+0x78/0xc0
[<0>] bdev_open+0x2c6/0x3b0
[<0>] bdev_file_open_by_dev+0xcb/0x120
[<0>] disk_scan_partitions+0x5d/0x100
[<0>] device_add_disk+0x402/0x420
[<0>] nvme_mpath_set_live+0x4f/0x1f0 [nvme_core]
[<0>] nvme_mpath_add_disk+0x107/0x120 [nvme_core]
[<0>] nvme_alloc_ns+0xac6/0xe60 [nvme_core]
[<0>] nvme_scan_ns+0x2dd/0x3e0 [nvme_core]
[<0>] nvme_scan_work+0x1a3/0x490 [nvme_core]
This happens when we have several paths, some of which are inaccessible,
and the active paths are removed first. Then nvme_find_path() will requeue
I/O in the ns_head (as paths are present), but the requeue list is never
triggered as all remaining paths are inactive.
This patch checks for NVME_NSHEAD_DISK_LIVE in nvme_available_path(),
and requeue I/O after NVME_NSHEAD_DISK_LIVE has been cleared once
the last path has been removed to properly terminate pending I/O.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
NVME_NSHEAD_DISK_LIVE is a flag for struct nvme_ns_head, not nvme_ns.
The current code has a typo causing NVME_NSHEAD_DISK_LIVE never to
be cleared once device_add_disk_fails, causing the system never to
create the 'generic' character device. Even several rescan attempts
will change the situation and the system has to be rebooted to fix
the issue.
Fixes: 11384580e3 ("nvme-multipath: add error handling support for add_disk()")
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The cifs flag CIFS_INO_MODIFIED_ATTR, which indicates that the mtime and
ctime need to be written back on close, got taken over by netfs as
NETFS_ICTX_MODIFIED_ATTR to avoid the need to call a function pointer to
set it.
The flag gets set correctly on buffered writes, but doesn't get set by
netfs_page_mkwrite(), leading to occasional failures in generic/080 and
generic/215.
Fix this by setting the flag in netfs_page_mkwrite().
Fixes: 73425800ac ("netfs, cifs: Move CIFS_INO_MODIFIED_ATTR to netfs_inode")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202409161629.98887b2-oliver.sang@intel.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Do not flood dmesg with failed session logoffs as kerberos tickets
getting expired or passwords being rotated is a very common scenario.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
cifs_read_iter_from_socket() copies the iterator that's passed in for the
socket to modify as and if it will, and then advances the original iterator
by the amount sent. However, both callers revert the advancement (although
receive_encrypted_read() zeros beyond the iterator first). The problem is,
though, that cifs_readv_receive() reverts by the original length, not the
amount transmitted which can cause an oops in iov_iter_revert().
Fix this by:
(1) Remove the iov_iter_advance() from cifs_read_iter_from_socket().
(2) Remove the iov_iter_revert() from both callers. This fixes the bug in
cifs_readv_receive().
(3) In receive_encrypted_read(), if we didn't get back as much data as the
buffer will hold, copy the iterator, advance the copy and use the copy
to drive iov_iter_zero().
As a bonus, this gets rid of some unnecessary work.
This was triggered by generic/074 with the "-o sign" mount option.
Fixes: 3ee1a1fc39 ("cifs: Cut over to using netfslib")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Commands like "chmod 0444" mark a file readonly via the attribute flag
(when mapping of mode bits into the ACL are not set, or POSIX extensions
are not negotiated), but they were not reported correctly for stat of
directories (they were reported ok for files and for "ls"). See example
below:
root:~# ls /mnt2 -l
total 12
drwxr-xr-x 2 root root 0 Sep 21 18:03 normaldir
-rwxr-xr-x 1 root root 0 Sep 21 23:24 normalfile
dr-xr-xr-x 2 root root 0 Sep 21 17:55 readonly-dir
-r-xr-xr-x 1 root root 209716224 Sep 21 18:15 readonly-file
root:~# stat -c %a /mnt2/readonly-dir
755
root:~# stat -c %a /mnt2/readonly-file
555
This fixes the stat of directories when ATTR_READONLY is set
(in cases where the mode can not be obtained other ways).
root:~# stat -c %a /mnt2/readonly-dir
555
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Report correct major and minor numbers from special files created with
NFS reparse points.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix major and minor numbers set on special files created with NFS
reparse points.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Propagate error from cifs_construct_tcon() in cifs_sb_tlink() instead of
always returning -EACCES.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For sessions and tcons created on behalf of new users accessing a
multiuser mount, matching their sessions in tcon_super_cb() with
master tcon will always lead to false as every new user will have its
own session and tcon.
All multiuser sessions, however, will inherit ->dfs_root_ses from
master tcon, so match it instead.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make the write RPC tracepoints use the same trace macro complexes as the
read tracepoints and display the netfs request and subrequest IDs where
available (see commit 519be98971 "cifs: Add a tracepoint to track credits
involved in R/W requests").
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <stfrench@microsoft.com>
cc: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
