The kernel thread function ksmbd_conn_handler_loop() invokes
the try_to_freeze() in its loop. But all the kernel threads are
non-freezable by default. So if we want to make a kernel thread to be
freezable, we have to invoke set_freezable() explicitly.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The ppace array is not freed if one of the init_acl_state() calls inside
parse_dacl() fails. At the moment the function may fail only due to the
memory allocation errors so it's highly unlikely in this case but
nevertheless a fix is needed.
Move ppace allocation after the init_acl_state() calls with proper error
handling.
Found by Linux Verification Center (linuxtesting.org).
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
are included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the
series
"maple_tree: add mt_free_one() and mt_attr() helpers"
"Some cleanups of maple tree"
- In the series "mm: use memmap_on_memory semantics for dax/kmem"
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few
fixes) in the patch series
"Add folio_zero_tail() and folio_fill_tail()"
"Make folio_start_writeback return void"
"Fix fault handler's handling of poisoned tail pages"
"Convert aops->error_remove_page to ->error_remove_folio"
"Finish two folio conversions"
"More swap folio conversions"
- Kefeng Wang has also contributed folio-related work in the series
"mm: cleanup and use more folio in page fault"
- Jim Cromie has improved the kmemleak reporting output in the
series "tweak kmemleak report format".
- In the series "stackdepot: allow evicting stack traces" Andrey
Konovalov to permits clients (in this case KASAN) to cause
eviction of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series "mm:
page_alloc: fixes for high atomic reserve caluculations".
- Dmitry Rokosov has added to the samples/ dorectory some sample
code for a userspace memcg event listener application. See the
series "samples: introduce cgroup events listeners".
- Some mapletree maintanance work from Liam Howlett in the series
"maple_tree: iterator state changes".
- Nhat Pham has improved zswap's approach to writeback in the
series "workload-specific and memory pressure-driven zswap
writeback".
- DAMON/DAMOS feature and maintenance work from SeongJae Park in
the series
"mm/damon: let users feed and tame/auto-tune DAMOS"
"selftests/damon: add Python-written DAMON functionality tests"
"mm/damon: misc updates for 6.8"
- Yosry Ahmed has improved memcg's stats flushing in the series
"mm: memcg: subtree stats flushing and thresholds".
- In the series "Multi-size THP for anonymous memory" Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series "More buffer_head
cleanups".
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
"userfaultfd move option". UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a "KSM Advisor", in the series
"mm/ksm: Add ksm advisor". This is a governor which tunes KSM's
scanning aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory
use in the series "mm/zswap: dstmem reuse optimizations and
cleanups".
- Matthew Wilcox has performed some maintenance work on the
writeback code, both code and within filesystems. The series is
"Clean up the writeback paths".
- Andrey Konovalov has optimized KASAN's handling of alloc and
free stack traces for secondary-level allocators, in the series
"kasan: save mempool stack traces".
- Andrey also performed some KASAN maintenance work in the series
"kasan: assorted clean-ups".
- David Hildenbrand has gone to town on the rmap code. Cleanups,
more pte batching, folio conversions and more. See the series
"mm/rmap: interface overhaul".
- Kinsey Ho has contributed some maintenance work on the MGLRU
code in the series "mm/mglru: Kconfig cleanup".
- Matthew Wilcox has contributed lruvec page accounting code
cleanups in the series "Remove some lruvec page accounting
functions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZyF2wAKCRDdBJ7gKXxA
jjWjAP42LHvGSjp5M+Rs2rKFL0daBQsrlvy6/jCHUequSdWjSgEAmOx7bc5fbF27
Oa8+DxGM9C+fwqZ/7YxU2w/WuUmLPgU=
=0NHs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
Send lease break notification on FILE_RENAME_INFORMATION request.
This patch fix smb2.lease.v2_epoch2 test failure.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When file is changed using notepad on read-only share(read_only = yes in
ksmbd.conf), There is a problem where existing data is truncated.
notepad in windows try to O_TRUNC open(FILE_OVERWRITE_IF) and all data
in file is truncated. This patch don't allow O_TRUNC open on read-only
share and add KSMBD_TREE_CONN_FLAG_WRITABLE check in smb2_set_info().
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix all kernel-doc warnings in vfs.c:
vfs.c:54: warning: Function parameter or member 'parent' not described in 'ksmbd_vfs_lock_parent'
vfs.c:54: warning: Function parameter or member 'child' not described in 'ksmbd_vfs_lock_parent'
vfs.c:54: warning: No description found for return value of 'ksmbd_vfs_lock_parent'
vfs.c:372: warning: Function parameter or member 'fp' not described in 'ksmbd_vfs_read'
vfs.c:372: warning: Excess function parameter 'fid' description in 'ksmbd_vfs_read'
vfs.c:489: warning: Function parameter or member 'fp' not described in 'ksmbd_vfs_write'
vfs.c:489: warning: Excess function parameter 'fid' description in 'ksmbd_vfs_write'
vfs.c:555: warning: Function parameter or member 'path' not described in 'ksmbd_vfs_getattr'
vfs.c:555: warning: Function parameter or member 'stat' not described in 'ksmbd_vfs_getattr'
vfs.c:555: warning: Excess function parameter 'work' description in 'ksmbd_vfs_getattr'
vfs.c:555: warning: Excess function parameter 'fid' description in 'ksmbd_vfs_getattr'
vfs.c:555: warning: Excess function parameter 'attrs' description in 'ksmbd_vfs_getattr'
vfs.c:572: warning: Function parameter or member 'p_id' not described in 'ksmbd_vfs_fsync'
vfs.c:595: warning: Function parameter or member 'work' not described in 'ksmbd_vfs_remove_file'
vfs.c:595: warning: Function parameter or member 'path' not described in 'ksmbd_vfs_remove_file'
vfs.c:595: warning: Excess function parameter 'name' description in 'ksmbd_vfs_remove_file'
vfs.c:633: warning: Function parameter or member 'work' not described in 'ksmbd_vfs_link'
vfs.c:805: warning: Function parameter or member 'fp' not described in 'ksmbd_vfs_truncate'
vfs.c:805: warning: Excess function parameter 'fid' description in 'ksmbd_vfs_truncate'
vfs.c:846: warning: Excess function parameter 'size' description in 'ksmbd_vfs_listxattr'
vfs.c:953: warning: Function parameter or member 'option' not described in 'ksmbd_vfs_set_fadvise'
vfs.c:953: warning: Excess function parameter 'options' description in 'ksmbd_vfs_set_fadvise'
vfs.c:1167: warning: Function parameter or member 'um' not described in 'ksmbd_vfs_lookup_in_dir'
vfs.c:1203: warning: Function parameter or member 'work' not described in 'ksmbd_vfs_kern_path_locked'
vfs.c:1641: warning: No description found for return value of 'ksmbd_vfs_init_kstat'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <sfrench@samba.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix 12 of 17 kernel-doc warnings in auth.c:
auth.c:221: warning: Function parameter or member 'conn' not described in 'ksmbd_auth_ntlmv2'
auth.c:221: warning: Function parameter or member 'cryptkey' not described in 'ksmbd_auth_ntlmv2'
auth.c:305: warning: Function parameter or member 'blob_len' not described in 'ksmbd_decode_ntlmssp_auth_blob'
auth.c:305: warning: Function parameter or member 'conn' not described in 'ksmbd_decode_ntlmssp_auth_blob'
auth.c:305: warning: Excess function parameter 'usr' description in 'ksmbd_decode_ntlmssp_auth_blob'
auth.c:385: warning: Function parameter or member 'blob_len' not described in 'ksmbd_decode_ntlmssp_neg_blob'
auth.c:385: warning: Function parameter or member 'conn' not described in 'ksmbd_decode_ntlmssp_neg_blob'
auth.c:385: warning: Excess function parameter 'rsp' description in 'ksmbd_decode_ntlmssp_neg_blob'
auth.c:385: warning: Excess function parameter 'sess' description in 'ksmbd_decode_ntlmssp_neg_blob'
auth.c:413: warning: Function parameter or member 'conn' not described in 'ksmbd_build_ntlmssp_challenge_blob'
auth.c:413: warning: Excess function parameter 'rsp' description in 'ksmbd_build_ntlmssp_challenge_blob'
auth.c:413: warning: Excess function parameter 'sess' description in 'ksmbd_build_ntlmssp_challenge_blob'
The other 5 are only present when a W=1 kernel build is done or
when scripts/kernel-doc is run with -Wall. They are:
auth.c:81: warning: No description found for return value of 'ksmbd_gen_sess_key'
auth.c:385: warning: No description found for return value of 'ksmbd_decode_ntlmssp_neg_blob'
auth.c:413: warning: No description found for return value of 'ksmbd_build_ntlmssp_challenge_blob'
auth.c:577: warning: No description found for return value of 'ksmbd_sign_smb2_pdu'
auth.c:628: warning: No description found for return value of 'ksmbd_sign_smb3_pdu'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <sfrench@samba.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
This is less verbose.
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_range() is inclusive. So change a 0xFFFFFFFF into a 0xFFFFFFFE in
order to keep the same behavior.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If existing lease state and request state are same, don't increment
epoch in create context.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb2_set_ea() can be called in parent inode lock range.
So add get_write argument to smb2_set_ea() not to call nested
mnt_want_write().
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If file opened with v2 lease is upgraded with v1 lease, smb server
should response v2 lease create context to client.
This patch fix smb2.lease.v2_epoch2 test failure.
This test case assumes the following scenario:
1. smb2 create with v2 lease(R, LEASE1 key)
2. smb server return smb2 create response with v2 lease context(R,
LEASE1 key, epoch + 1)
3. smb2 create with v1 lease(RH, LEASE1 key)
4. smb server return smb2 create response with v2 lease context(RH,
LEASE1 key, epoch + 2)
i.e. If same client(same lease key) try to open a file that is being
opened with v2 lease with v1 lease, smb server should return v2 lease.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The SMB2 Protocol requires that "The first byte of the Direct TCP
transport packet header MUST be zero (0x00)"[1]. Commit 1c1bcf2d3e
("ksmbd: validate smb request protocol id") removed the validation of
this 1-byte zero. Add the validation back now.
[1]: [MS-SMB2] - v20230227, page 30.
https://winprotocoldoc.blob.core.windows.net/productionwindowsarchives/MS-SMB2/%5bMS-SMB2%5d-230227.pdf
Fixes: 1c1bcf2d3e ("ksmbd: validate smb request protocol id")
Signed-off-by: Li Nan <linan122@huawei.com>
Acked-by: Tom Talpey <tom@talpey.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Return statement was not needed at end of cifs_chan_update_iface
Suggested-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Signed-off-by: Steve French <stfrench@microsoft.com>
The return values for cifs_chan_update_iface() didn't match what the
documentation said and nothing was checking them anyway. Just make it
a void function.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
We return early if "iface" is NULL so there is no need to check here.
Delete those checks.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZZUzXQAKCRCRxhvAZXjc
ogOtAQDpqUp1zY4dV/dZisCJ5xarZTsSZ1AvgmcxZBtS0NhbdgEAshWvYGA9ryS/
ChL5jjtjjZDLhRA//reoFHTQIrdp2w8=
=bF+R
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8.rw' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs rw updates from Christian Brauner:
"This contains updates from Amir for read-write backing file helpers
for stacking filesystems such as overlayfs:
- Fanotify is currently in the process of introducing pre content
events. Roughly, a new permission event will be added indicating
that it is safe to write to the file being accessed. These events
are used by hierarchical storage managers to e.g., fill the content
of files on first access.
During that work we noticed that our current permission checking is
inconsistent in rw_verify_area() and remap_verify_area().
Especially in the splice code permission checking is done multiple
times. For example, one time for the whole range and then again for
partial ranges inside the iterator.
In addition, we mostly do permission checking before we call
file_start_write() except for a few places where we call it after.
For pre-content events we need such permission checking to be done
before file_start_write(). So this is a nice reason to clean this
all up.
After this series, all permission checking is done before
file_start_write().
As part of this cleanup we also massaged the splice code a bit. We
got rid of a few helpers because we are alredy drowning in special
read-write helpers. We also cleaned up the return types for splice
helpers.
- Introduce generic read-write helpers for backing files. This lifts
some overlayfs code to common code so it can be used by the FUSE
passthrough work coming in over the next cycles. Make Amir and
Miklos the maintainers for this new subsystem of the vfs"
* tag 'vfs-6.8.rw' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (30 commits)
fs: fix __sb_write_started() kerneldoc formatting
fs: factor out backing_file_mmap() helper
fs: factor out backing_file_splice_{read,write}() helpers
fs: factor out backing_file_{read,write}_iter() helpers
fs: prepare for stackable filesystems backing file helpers
fsnotify: optionally pass access range in file permission hooks
fsnotify: assert that file_start_write() is not held in permission hooks
fsnotify: split fsnotify_perm() into two hooks
fs: use splice_copy_file_range() inline helper
splice: return type ssize_t from all helpers
fs: use do_splice_direct() for nfsd/ksmbd server-side-copy
fs: move file_start_write() into direct_splice_actor()
fs: fork splice_file_range() from do_splice_direct()
fs: create {sb,file}_write_not_started() helpers
fs: create file_write_started() helper
fs: create __sb_write_started() helper
fs: move kiocb_start_write() into vfs_iocb_iter_write()
fs: move permission hook out of do_iter_read()
fs: move permission hook out of do_iter_write()
fs: move file_start_write() into vfs_iter_write()
...
smb2_compound_op(SMB2_OP_GET_REPARSE) already checks if ioctl response
has a valid reparse data buffer's length, so there's no need to check
it again in parse_reparse_point().
In order to get rid of duplicate check, validate reparse data buffer's
length also in cifs_query_reparse_point().
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Query dir responses don't provide enough information on reparse points
such as major/minor numbers and symlink targets other than reparse
tags, however we don't need to unconditionally revalidate them only
because they are reparse points. Instead, revalidate them only when
their ctime or reparse tag has changed.
For instance, Windows Server updates ctime of reparse points when
their data have changed.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Change SMB2_set_eof() to take eof as CPU order rather than __le64 and pass
it directly rather than by pointer. This moves the conversion down into
SMB_set_eof() rather than all of its callers and means we don't need to
undo it for the traceline.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
The kfree() function was called in one case by
the allocate_mr_list() function during error handling
even if the passed variable contained a null pointer.
This issue was detected by using the Coccinelle software.
Thus use another label.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Steve French <stfrench@microsoft.com>
Recently, cifs_chan_update_iface was modified to not
remove an iface if a suitable replacement was not found.
With that, there were two conditionals that were exactly
the same. This change removes that extra condition check.
Also, fixed a logging in the same function to indicate
the correct message.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Parse reparse points in SMB3 posix query info as they will be
supported and required by the new specification.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use smb2_compound_op() with SMB2_OP_GET_REPARSE to get reparse point.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add support for creating symlinks via IO_REPARSE_TAG_SYMLINK reparse
points in SMB2+.
These are fully supported by most SMB servers and documented in
MS-FSCC. Also have the advantage of requiring fewer roundtrips as
their symlink targets can be parsed directly from CREATE responses on
STATUS_STOPPED_ON_SYMLINK errors.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311260838.nx5mkj1j-lkp@intel.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The client was sending an SMB2_CREATE request without setting
OPEN_REPARSE_POINT flag thus failing the entire hardlink operation.
Fix this by setting OPEN_REPARSE_POINT in create options for
SMB2_CREATE request when the source inode is a repase point.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The client was sending an SMB2_CREATE request without setting
OPEN_REPARSE_POINT flag thus failing the entire rename operation.
Fix this by setting OPEN_REPARSE_POINT in create options for
SMB2_CREATE request when the source inode is a repase point.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reduce number of roundtrips to server when querying reparse points in
->query_path_info() by sending a single compound request of
create+get_reparse+get_info+close.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add support for creating special files (e.g. char/block devices,
sockets, fifos) via NFS reparse points on SMB2+, which are fully
supported by most SMB servers and documented in MS-FSCC.
smb2_get_reparse_inode() creates the file with a corresponding reparse
point buffer set in @iov through a single roundtrip to the server.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311260746.HOJ039BV-lkp@intel.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make smb2_compound_op() accept up to MAX_COMPOUND(5) commands to be
sent over a single compounded request.
This will allow next commits to read and write reparse files through a
single roundtrip to the server.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fixes no-op checkpatch errors and warnings.
Signed-off-by: Pierre Mariani <pierre.mariani@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=0P5G
-----END PGP SIGNATURE-----
Merge tag '6.7-rc8-smb3-mchan-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Three important multichannel smb3 client fixes found in recent
testing:
- fix oops due to incorrect refcounting of interfaces after
disabling multichannel
- fix possible unrecoverable session state after disabling
multichannel with active sessions
- fix two places that were missing use of chan_lock"
* tag '6.7-rc8-smb3-mchan-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: do not depend on release_iface for maintaining iface_list
cifs: cifs_chan_is_iface_active should be called with chan_lock held
cifs: after disabling multichannel, mark tcon for reconnect
parse_server_interfaces should be in complete charge of maintaining
the iface_list linked list. Today, iface entries are removed
from the list only when the last refcount is dropped.
i.e. in release_iface. However, this can result in undercounting
of refcount if the server stops advertising interfaces (which
Azure SMB server does).
This change puts parse_server_interfaces in full charge of
maintaining the iface_list. So if an empty list is returned
by the server, the entries in the list will immediately be
removed. This way, a following call to the same function will
not find entries in the list.
Fixes: aa45dadd34 ("cifs: change iface_list from array to sorted linked list")
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
cifs_chan_is_iface_active checks the channels of a session to see
if the associated iface is active. This should always happen
with chan_lock held. However, these two callers of this function
were missing this locking.
This change makes sure the function calls are protected with
proper locking.
Fixes: b54034a73b ("cifs: during reconnect, update interface if necessary")
Fixes: fa1d0508bd ("cifs: account for primary channel in the interface list")
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Once the server disables multichannel for an active multichannel
session, on the following reconnect, the client would reduce
the number of channels to 1. However, it could be the case that
the tree connect was active on one of these disabled channels.
This results in an unrecoverable state.
This change fixes that by making sure that whenever a channel
is being terminated, the session and tcon are marked for
reconnect too. This could mean a few redundant tree connect
calls to the server, but considering that this is not a frequent
event, we should be okay.
Fixes: ee1d21794e ("cifs: handle when server stops supporting multichannel")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=/4UC
-----END PGP SIGNATURE-----
Merge tag '6.7rc7-smb3-srv-fix' of git://git.samba.org/ksmbd
Pull ksmbd server fix from Steve French:
- address possible slab out of bounds in parsing of open requests
* tag '6.7rc7-smb3-srv-fix' of git://git.samba.org/ksmbd:
ksmbd: fix slab-out-of-bounds in smb_strndup_from_utf16()
Track the file position above which the server is not expected to have any
data (the "zero point") and preemptively assume that we can satisfy
requests by filling them with zeroes locally rather than attempting to
download them if they're over that line - even if we've written data back
to the server. Assume that any data that was written back above that
position is held in the local cache. Note that we have to split requests
that straddle the line.
Make use of this to optimise away some reads from the server. We need to
set the zero point in the following circumstances:
(1) When we see an extant remote inode and have no cache for it, we set
the zero_point to i_size.
(2) On local inode creation, we set zero_point to 0.
(3) On local truncation down, we reduce zero_point to the new i_size if
the new i_size is lower.
(4) On local truncation up, we don't change zero_point.
(5) On local modification, we don't change zero_point.
(6) On remote invalidation, we set zero_point to the new i_size.
(7) If stored data is discarded from the pagecache or culled from fscache,
we must set zero_point above that if the data also got written to the
server.
(8) If dirty data is written back to the server, but not fscache, we must
set zero_point above that.
(9) If a direct I/O write is made, set zero_point above that.
Assuming the above, any read from the server at or above the zero_point
position will return all zeroes.
The zero_point value can be stored in the cache, provided the above rules
are applied to it by any code that culls part of the local cache.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Make netfslib pass the maximum length to the ->prepare_write() op to tell
the cache how much it can expand the length of a write to. This allows a
write to the server at the end of a file to be limited to a few bytes
whilst writing an entire block to the cache (something required by direct
I/O).
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
If ->NameOffset/Length is bigger than ->CreateContextsOffset/Length,
ksmbd_check_message doesn't validate request buffer it correctly.
So slab-out-of-bounds warning from calling smb_strndup_from_utf16()
in smb2_open() could happen. If ->NameLength is non-zero, Set the larger
of the two sums (Name and CreateContext size) as the offset and length of
the data area.
Reported-by: Yang Chaoming <lometsj@live.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Move the resource pinning-for-writeback from fscache code to netfslib code.
This is used to keep a cache backing object pinned whilst we have dirty
pages on the netfs inode in the pagecache such that VM writeback will be
able to reach it.
Whilst we're at it, switch the parameters of netfs_unpin_writeback() to
match ->write_inode() so that it can be used for that directly.
Note that this mechanism could be more generically useful than that for
network filesystems. Quite often they have to keep around other resources
(e.g. authentication tokens or network connections) until the writeback is
complete.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
cifs_chan_update_iface is meant to check and update the server
interface used for a channel when the existing server interface
is no longer available.
So far, this handler had the code to remove an interface entry
even if a new candidate interface is not available. Allowing
this leads to several corner cases to handle.
This change makes the logic much simpler by not deallocating
the current channel interface entry if a new interface is not
found to replace it with.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit 9b9c5bea0b ("cifs: do not return atime less than mtime") indicates
that in cifs, if atime is less than mtime, some apps will break.
Therefore, it introduce a function to compare this two variables in two
places where atime is updated. If atime is less than mtime, update it to
mtime.
However, the patch was handled incorrectly, resulting in atime and mtime
being exactly equal. A previous commit 69738cfdfa ("fs: cifs: Fix atime
update check vs mtime") fixed one place and forgot to fix another. Fix it.
Fixes: 9b9c5bea0b ("cifs: do not return atime less than mtime")
Cc: stable@vger.kernel.org
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Validate SMB message with ->check_message() before calling
->calc_smb_size().
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=i6Gk
-----END PGP SIGNATURE-----
Merge tag '6.7-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Address OOBs and NULL dereference found by Dr. Morris's recent
analysis and fuzzing.
All marked for stable as well"
* tag '6.7-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix OOB in smb2_query_reparse_point()
smb: client: fix NULL deref in asn1_ber_decoder()
smb: client: fix potential OOBs in smb2_parse_contexts()
smb: client: fix OOB in receive_encrypted_standard()
-----BEGIN PGP SIGNATURE-----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=yMkH
-----END PGP SIGNATURE-----
Merge tag '6.7-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Memory leak fix (in lock error path)
- Two fixes for create with allocation size
- FIx for potential UAF in lease break error path
- Five directory lease (caching) fixes found during additional recent
testing
* tag '6.7-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix wrong name of SMB2_CREATE_ALLOCATION_SIZE
ksmbd: fix wrong allocation size update in smb2_open()
ksmbd: avoid duplicate opinfo_put() call on error of smb21_lease_break_ack()
ksmbd: lazy v2 lease break on smb2_write()
ksmbd: send v2 lease break notification for directory
ksmbd: downgrade RWH lease caching state to RH for directory
ksmbd: set v2 lease capability
ksmbd: set epoch in create context v2 lease
ksmbd: fix memory leak in smb2_lock()
generic_copy_file_range() is just a wrapper around splice_file_range(),
which caps the maximum copy length.
The only caller of splice_file_range(), namely __ceph_copy_file_range()
is already ready to cope with short copy.
Move the length capping into splice_file_range() and replace the exported
symbol generic_copy_file_range() with a simple inline helper.
Suggested-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-fsdevel/20231204083849.GC32438@lst.de/
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231212094440.250945-3-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Fix potential OOB in receive_encrypted_standard() if server returned a
large shdr->NextCommand that would end up writing off the end of
@next_buffer.
Fixes: b24df3e30c ("cifs: update receive_encrypted_standard to handle compounded responses")
Cc: stable@vger.kernel.org
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In preparation for removing the return value entirely, stop testing it
in smb.
Link: https://lkml.kernel.org/r/20231108204605.745109-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Steve French <sfrench@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
MS confirm that "AISi" name of SMB2_CREATE_ALLOCATION_SIZE in MS-SMB2
specification is a typo. cifs/ksmbd have been using this wrong name from
MS-SMB2. It should be "AlSi". Also It will cause problem when running
smb2.create.open test in smbtorture against ksmbd.
Cc: stable@vger.kernel.org
Fixes: 12197a7fdd ("Clarify SMB2/SMB3 create context and add missing ones")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When client send SMB2_CREATE_ALLOCATION_SIZE create context, ksmbd update
old size to ->AllocationSize in smb2 create response. ksmbd_vfs_getattr()
should be called after it to get updated stat result.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
opinfo_put() could be called twice on error of smb21_lease_break_ack().
It will cause UAF issue if opinfo is referenced on other places.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Don't immediately send directory lease break notification on smb2_write().
Instead, It postpones it until smb2_close().
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If client send different parent key, different client guid, or there is
no parent lease key flags in create context v2 lease, ksmbd send lease
break to client.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reconnect worker currently assumes that the server struct
is alive and only takes reference on the server if it needs
to call smb2_reconnect.
With the new ability to disable channels based on whether the
server has multichannel disabled, this becomes a problem when
we need to disable established channels. While disabling the
channels and deallocating the server, there could be reconnect
work that could not be cancelled (because it started).
This change forces the reconnect worker to unconditionally
take a reference on the server when it runs.
Also, this change now allows smb2_reconnect to know if it was
called by the reconnect worker. Based on this, the cifs_put_tcp_session
can decide whether it can cancel the reconnect work synchronously or not.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This reverts commit 19a4b9d6c3.
This earlier commit was making an assumption that each mod_delayed_work
called for the reconnect work would result in smb2_reconnect_server
being called twice. This assumption turns out to be untrue. So reverting
this change for now.
I will submit a follow-up patch to fix the actual problem in a different
way.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Deduplication isn't supported on cifs, but cifs doesn't reject it, instead
treating it as extent duplication/cloning. This can cause generic/304 to go
silly and run for hours on end.
Fix cifs to indicate EOPNOTSUPP if REMAP_FILE_DEDUP is set in
->remap_file_range().
Note that it's unclear whether or not commit b073a08016 is meant to cause
cifs to return an error if REMAP_FILE_DEDUP.
Fixes: b073a08016 ("cifs: fix that return -EINVAL when do dedupe operation")
Cc: stable@vger.kernel.org
Suggested-by: Dave Chinner <david@fromorbit.com>
cc: Xiaoli Feng <fengxiaoli0714@gmail.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Darrick Wong <darrick.wong@oracle.com>
cc: fstests@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/3876191.1701555260@warthog.procyon.org.uk/
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If server returned no data for FSCTL_DFS_GET_REFERRALS, @dfs_rsp will
remain NULL and then parse_dfs_referrals() will dereference it.
Fix this by returning -EIO when no output data is returned.
Besides, we can't fix it in SMB2_ioctl() as some FSCTLs are allowed to
return no data as per MS-SMB2 2.2.32.
Fixes: 9d49640a21 ("CIFS: implement get_dfs_refer for SMB2+")
Cc: stable@vger.kernel.org
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
RWH(Read + Write + Handle) caching state is not supported for directory.
ksmbd downgrade it to RH for directory if client send RWH caching lease
state.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Set SMB2_GLOBAL_CAP_DIRECTORY_LEASING to ->capabilities to inform server
support directory lease to client.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
To support v2 lease(directory lease), ksmbd set epoch in create context
v2 lease response.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In smb2_lock(), if setup_async_work() executes successfully,
work->cancel_argv will bind the argv that generated by kmalloc(). And
release_async_work() is called in ksmbd_conn_try_dequeue_request() or
smb2_lock() to release argv.
However, when setup_async_work function fails, work->cancel_argv has not
been bound to the argv, resulting in the previously allocated argv not
being released. Call kfree() to fix it.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix a number of issues in the cifs filesystem implementation of the FICLONE
ioctl in cifs_remap_file_range(). This is analogous to the previously
fixed bug in cifs_file_copychunk_range() and can share the helper
functions.
Firstly, the invalidation of the destination range is handled incorrectly:
We shouldn't just invalidate the whole file as dirty data in the file may
get lost and we can't just call truncate_inode_pages_range() to invalidate
the destination range as that will erase parts of a partial folio at each
end whilst invalidating and discarding all the folios in the middle. We
need to force all the folios covering the range to be reloaded, but we
mustn't lose dirty data in them that's not in the destination range.
Further, we shouldn't simply round out the range to PAGE_SIZE at each end
as cifs should move to support multipage folios.
Secondly, there's an issue whereby a write may have extended the file
locally, but not have been written back yet. This can leaves the local
idea of the EOF at a later point than the server's EOF. If a clone request
is issued, this will fail on the server with STATUS_INVALID_VIEW_SIZE
(which gets translated to -EIO locally) if the clone source extends past
the server's EOF.
Fix this by:
(0) Flush the source region (already done). The flush does nothing and
the EOF isn't moved if the source region has no dirty data.
(1) Move the EOF to the end of the source region if it isn't already at
least at this point. If we can't do this, for instance if the server
doesn't support it, just flush the entire source file.
(2) Find the folio (if present) at each end of the range, flushing it and
increasing the region-to-be-invalidated to cover those in their
entirety.
(3) Fully discard all the folios covering the range as we want them to be
reloaded.
(4) Then perform the extent duplication.
Thirdly, set i_size after doing the duplicate_extents operation as this
value may be used by various things internally. stat() hides the issue
because setting ->time to 0 causes cifs_getatr() to revalidate the
attributes.
These were causing the cifs/001 xfstest to fail.
Fixes: 04b38d6012 ("vfs: pull btrfs clone API to vfs layer")
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
cc: Christoph Hellwig <hch@lst.de>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix a number of issues in the cifs filesystem implementation of the
copy_file_range() syscall in cifs_file_copychunk_range().
Firstly, the invalidation of the destination range is handled incorrectly:
We shouldn't just invalidate the whole file as dirty data in the file may
get lost and we can't just call truncate_inode_pages_range() to invalidate
the destination range as that will erase parts of a partial folio at each
end whilst invalidating and discarding all the folios in the middle. We
need to force all the folios covering the range to be reloaded, but we
mustn't lose dirty data in them that's not in the destination range.
Further, we shouldn't simply round out the range to PAGE_SIZE at each end
as cifs should move to support multipage folios.
Secondly, there's an issue whereby a write may have extended the file
locally, but not have been written back yet. This can leaves the local
idea of the EOF at a later point than the server's EOF. If a copy request
is issued, this will fail on the server with STATUS_INVALID_VIEW_SIZE
(which gets translated to -EIO locally) if the copy source extends past the
server's EOF.
Fix this by:
(0) Flush the source region (already done). The flush does nothing and
the EOF isn't moved if the source region has no dirty data.
(1) Move the EOF to the end of the source region if it isn't already at
least at this point. If we can't do this, for instance if the server
doesn't support it, just flush the entire source file.
(2) Find the folio (if present) at each end of the range, flushing it and
increasing the region-to-be-invalidated to cover those in their
entirety.
(3) Fully discard all the folios covering the range as we want them to be
reloaded.
(4) Then perform the copy.
Thirdly, set i_size after doing the copychunk_range operation as this value
may be used by various things internally. stat() hides the issue because
setting ->time to 0 causes cifs_getatr() to revalidate the attributes.
These were causing the generic/075 xfstest to fail.
Fixes: 620d8745b3 ("Introduce cifs_copy_file_range()")
Cc: stable@vger.kernel.org
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=g+0x
-----END PGP SIGNATURE-----
Merge tag 'v6.7-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Two fallocate fixes
- Fix warnings from new gcc
- Two symlink fixes
* tag 'v6.7-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client, common: fix fortify warnings
cifs: Fix FALLOC_FL_INSERT_RANGE by setting i_size after EOF moved
cifs: Fix FALLOC_FL_ZERO_RANGE by setting i_size if EOF moved
smb: client: report correct st_size for SMB and NFS symlinks
smb: client: fix missing mode bits for SMB symlinks
When compiling with gcc version 14.0.0 20231126 (experimental)
and CONFIG_FORTIFY_SOURCE=y, I've noticed the following:
In file included from ./include/linux/string.h:295,
from ./include/linux/bitmap.h:12,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/paravirt.h:17,
from ./arch/x86/include/asm/cpuid.h:62,
from ./arch/x86/include/asm/processor.h:19,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:60,
from ./arch/x86/include/asm/preempt.h:9,
from ./include/linux/preempt.h:79,
from ./include/linux/spinlock.h:56,
from ./include/linux/wait.h:9,
from ./include/linux/wait_bit.h:8,
from ./include/linux/fs.h:6,
from fs/smb/client/smb2pdu.c:18:
In function 'fortify_memcpy_chk',
inlined from '__SMB2_close' at fs/smb/client/smb2pdu.c:3480:4:
./include/linux/fortify-string.h:588:25: warning: call to '__read_overflow2_field'
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
588 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and:
In file included from ./include/linux/string.h:295,
from ./include/linux/bitmap.h:12,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/paravirt.h:17,
from ./arch/x86/include/asm/cpuid.h:62,
from ./arch/x86/include/asm/processor.h:19,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:60,
from ./arch/x86/include/asm/preempt.h:9,
from ./include/linux/preempt.h:79,
from ./include/linux/spinlock.h:56,
from ./include/linux/wait.h:9,
from ./include/linux/wait_bit.h:8,
from ./include/linux/fs.h:6,
from fs/smb/client/cifssmb.c:17:
In function 'fortify_memcpy_chk',
inlined from 'CIFS_open' at fs/smb/client/cifssmb.c:1248:3:
./include/linux/fortify-string.h:588:25: warning: call to '__read_overflow2_field'
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
588 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In both cases, the fortification logic inteprets calls to 'memcpy()' as an
attempts to copy an amount of data which exceeds the size of the specified
field (i.e. more than 8 bytes from __le64 value) and thus issues an overread
warning. Both of these warnings may be silenced by using the convenient
'struct_group()' quirk.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix the cifs filesystem implementations of FALLOC_FL_INSERT_RANGE, in
smb3_insert_range(), to set i_size after extending the file on the server
and before we do the copy to open the gap (as we don't clean up the EOF
marker if the copy fails).
Fixes: 7fe6fe95b9 ("cifs: add FALLOC_FL_INSERT_RANGE support")
Cc: stable@vger.kernel.org
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix the cifs filesystem implementations of FALLOC_FL_ZERO_RANGE, in
smb3_zero_range(), to set i_size after extending the file on the server.
Fixes: 72c419d9b0 ("cifs: fix smb3_zero_range so it can expand the file-size when required")
Cc: stable@vger.kernel.org
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Steve French <stfrench@microsoft.com>
We can't rely on FILE_STANDARD_INFORMATION::EndOfFile for reparse
points as they will be always zero. Set it to symlink target's length
as specified by POSIX.
This will make stat() family of syscalls return the correct st_size
for such files.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When instantiating inodes for SMB symlinks, add the mode bits from
@cifs_sb->ctx->file_mode as we already do for the other special files.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
... and fix the directory locking documentation and proof of correctness.
Holding ->s_vfs_rename_mutex *almost* prevents ->d_parent changes; the
case where we really don't want it is splicing the root of disconnected
tree to somewhere.
In other words, ->s_vfs_rename_mutex is sufficient to stabilize "X is an
ancestor of Y" only if X and Y are already in the same tree. Otherwise
it can go from false to true, and one can construct a deadlock on that.
Make lock_two_directories() report an error in such case and update the
callers of lock_rename()/lock_rename_child() to handle such errors.
And yes, such conditions are not impossible to create ;-/
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ksmbd set ->op_state as OPLOCK_STATE_NONE on lease break ack error.
op_state of lease should not be updated because client can send lease
break ack again. This patch fix smb2.lease.breaking2 test failure.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Directly set SMB2_FLAGS_ASYNC_COMMAND flags and AsyncId in smb2 header of
interim response instead of current response header.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add missing release async id and delete interim response entry after
sending status pending response. This only cause when smb2 lease is enable.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd should process secound parallel smb2 create request during waiting
oplock break ack. parent lock range that is too large in smb2_open() causes
smb2_open() to be serialized. Move the oplock handling to the bottom of
smb2_open() and make it called after parent unlock. This fixes the failure
of smb2.lease.breaking1 testcase.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
xfstests generic/002 test fail when enabling smb2 leases feature.
This test create hard link file, but removeal failed.
ci has a file open count to count file open through the smb client,
but in the case of hard link files, The allocation of ci per inode
cause incorrectly open count for file deletion. This patch allocate
ci per dentry to counts open counts for hard link.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When allocated memory for 'new' failed,just return
will cause memory leak of 'ar'.
Fixes: 1819a90429 ("ksmbd: reorganize ksmbd_iov_pin_rsp()")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202311031837.H3yo7JVl-lkp@intel.com/
Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Remove duplicate code and add new helper for creating special files in
SFU (Services for UNIX) format that can be shared by SMB1+ code.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Handle all file types in NFS reparse points as specified in MS-FSCC
2.1.2.6 Network File System (NFS) Reparse Data Buffer.
The client is now able to set all file types based on the parsed NFS
reparse point, which used to support only symlinks. This works for
SMB1+.
Before patch:
$ mount.cifs //srv/share /mnt -o ...
$ ls -l /mnt
ls: cannot access 'block': Operation not supported
ls: cannot access 'char': Operation not supported
ls: cannot access 'fifo': Operation not supported
ls: cannot access 'sock': Operation not supported
total 1
l????????? ? ? ? ? ? block
l????????? ? ? ? ? ? char
-rwxr-xr-x 1 root root 5 Nov 18 23:22 f0
l????????? ? ? ? ? ? fifo
l--------- 1 root root 0 Nov 18 23:23 link -> f0
l????????? ? ? ? ? ? sock
After patch:
$ mount.cifs //srv/share /mnt -o ...
$ ls -l /mnt
total 1
brwxr-xr-x 1 root root 123, 123 Nov 18 00:34 block
crwxr-xr-x 1 root root 1234, 1234 Nov 18 00:33 char
-rwxr-xr-x 1 root root 5 Nov 18 23:22 f0
prwxr-xr-x 1 root root 0 Nov 18 23:23 fifo
lrwxr-xr-x 1 root root 0 Nov 18 23:23 link -> f0
srwxr-xr-x 1 root root 0 Nov 19 2023 sock
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Parse reparse point into cifs_open_info_data structure and feed it
through cifs_open_info_to_fattr().
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reparse points are not limited to symlinks, so implement
->query_reparse_point() in order to handle different file types.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We were deferencing iface after it has been released. Fix is to
release after all dereference instances have been encountered.
Signed-off-by: Ritvik Budhiraja <rbudhiraja@microsoft.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202311110815.UJaeU3Tt-lkp@intel.com/
Signed-off-by: Steve French <stfrench@microsoft.com>
The code to handle the case of server disabling multichannel
was picking iface_lock with chan_lock held. This goes against
the lock ordering rules, as iface_lock is a higher order lock
(even if it isn't so obvious).
This change fixes the lock ordering by doing the following in
that order for each secondary channel:
1. store iface and server pointers in local variable
2. remove references to iface and server in channels
3. unlock chan_lock
4. lock iface_lock
5. dec ref count for iface
6. unlock iface_lock
7. dec ref count for server
8. lock chan_lock again
Since this function can only be called in smb2_reconnect, and
that cannot be called by two parallel processes, we should not
have races due to dropping chan_lock between steps 3 and 8.
Fixes: ee1d21794e ("cifs: handle when server stops supporting multichannel")
Reported-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
My last change in this area introduced a change which
accounted for primary channel in the interface ref count.
However, it did not reduce this ref count on deallocation
of the primary channel. i.e. during umount.
Fixing this leak here, by dropping this ref count for
primary channel while freeing up the session.
Fixes: fa1d0508bd ("cifs: account for primary channel in the interface list")
Cc: stable@vger.kernel.org
Reported-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Remove extra check after condition, add check after generating key
for encryption. The check is needed to return non zero rc before
rewriting it with generating key for decryption.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Fixes: d70e9fa558 ("cifs: try opening channels after mounting")
Signed-off-by: Ekaterina Esina <eesina@astralinux.ru>
Co-developed-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
"host=" should start with ';' (as in cifs_get_spnego_key)
So its length should be 6.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Fixes: 7c9c3760b3 ("[CIFS] add constants for string lengths of keynames in SPNEGO upcall string")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Co-developed-by: Ekaterina Esina <eesina@astralinux.ru>
Signed-off-by: Ekaterina Esina <eesina@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=xjGh
-----END PGP SIGNATURE-----
Merge tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- ctime caching fix (for setxattr)
- encryption fix
- DNS resolver mount fix
- debugging improvements
- multichannel fixes including cases where server stops or starts
supporting multichannel after mount
- reconnect fix
- minor cleanups
* tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number for cifs.ko
cifs: handle when server stops supporting multichannel
cifs: handle when server starts supporting multichannel
Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO
smb3: allow dumping session and tcon id to improve stats analysis and debugging
smb: client: fix mount when dns_resolver key is not available
smb3: fix caching of ctime on setxattr
smb3: minor cleanup of session handling code
cifs: reconnect work should have reference on server struct
cifs: do not pass cifs_sb when trying to add channels
cifs: account for primary channel in the interface list
cifs: distribute channels across interfaces based on speed
cifs: handle cases where a channel is closed
smb3: more minor cleanups for session handling routines
smb3: minor RDMA cleanup
cifs: Fix encryption of cleared, but unset rq_iter data buffers
-----BEGIN PGP SIGNATURE-----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=YnRz
-----END PGP SIGNATURE-----
Merge tag '6.7-rc-smb3-server-part2' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- slab out of bounds fix in ACL handling
- fix malformed request oops
- minor doc fix
* tag '6.7-rc-smb3-server-part2' of git://git.samba.org/ksmbd:
ksmbd: handle malformed smb1 message
ksmbd: fix kernel-doc comment of ksmbd_vfs_kern_path_locked()
ksmbd: fix slab out of bounds write in smb_inherit_dacl()
When a server stops supporting multichannel, we will
keep attempting reconnects to the secondary channels today.
Avoid this by freeing extra channels when negotiate
returns no multichannel support.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When the user mounts with multichannel option, but the
server does not support it, there can be a time in future
where it can be supported.
With this change, such a case is handled.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
