Some guest paging modes do not support A/D bits. Add support for such
modes in shadow page code. For such modes PT_GUEST_DIRTY_MASK,
PT_GUEST_ACCESSED_MASK, PT_GUEST_DIRTY_SHIFT and PT_GUEST_ACCESSED_SHIFT
should be set to zero.
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch makes guest A/D bits definition to be dependable on paging
mode, so when EPT support will be added it will be able to define them
differently.
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For preparation, we just move gpte_access(), prefetch_invalid_gpte(),
s_rsvd_bits_set(), protect_clean_gpte() and is_dirty_gpte() from mmu.c
to paging_tmpl.h.
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Xinhao Xu <xinhao.xu@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_set_cr3() attempts to check if the new cr3 is a valid guest physical
address. The problem is that with nested EPT, cr3 is an *L2* physical
address, not an L1 physical address as this test expects.
As the comment above this test explains, it isn't necessary, and doesn't
correspond to anything a real processor would do. So this patch removes it.
Note that this wrong test could have also theoretically caused problems
in nested NPT, not just in nested EPT. However, in practice, the problem
was avoided: nested_svm_vmexit()/vmrun() do not call kvm_set_cr3 in the
nested NPT case, and instead set the vmcb (and arch.cr3) directly, thus
circumventing the problem. Additional potential calls to the buggy function
are avoided in that we don't trap cr3 modifications when nested NPT is
enabled. However, because in nested VMX we did want to use kvm_set_cr3()
(as requested in Avi Kivity's review of the original nested VMX patches),
we can't avoid this problem and need to fix it.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Xinhao Xu <xinhao.xu@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The existing code for handling cr3 and related VMCS fields during nested
exit and entry wasn't correct in all cases:
If L2 is allowed to control cr3 (and this is indeed the case in nested EPT),
during nested exit we must copy the modified cr3 from vmcs02 to vmcs12, and
we forgot to do so. This patch adds this copy.
If L0 isn't controlling cr3 when running L2 (i.e., L0 is using EPT), and
whoever does control cr3 (L1 or L2) is using PAE, the processor might have
saved PDPTEs and we should also save them in vmcs12 (and restore later).
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Xinhao Xu <xinhao.xu@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recent KVM, since http://kerneltrap.org/mailarchive/linux-kvm/2010/5/2/6261577
switch the EFER MSR when EPT is used and the host and guest have different
NX bits. So if we add support for nested EPT (L1 guest using EPT to run L2)
and want to be able to run recent KVM as L1, we need to allow L1 to use this
EFER switching feature.
To do this EFER switching, KVM uses VM_ENTRY/EXIT_LOAD_IA32_EFER if available,
and if it isn't, it uses the generic VM_ENTRY/EXIT_MSR_LOAD. This patch adds
support for the former (the latter is still unsupported).
Nested entry and exit emulation (prepare_vmcs_02 and load_vmcs12_host_state,
respectively) already handled VM_ENTRY/EXIT_LOAD_IA32_EFER correctly. So all
that's left to do in this patch is to properly advertise this feature to L1.
Note that vmcs12's VM_ENTRY/EXIT_LOAD_IA32_EFER are emulated by L0, by using
vmx_set_efer (which itself sets one of several vmcs02 fields), so we always
support this feature, regardless of whether the host supports it.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Xinhao Xu <xinhao.xu@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current code always uses arch.mmu to check the reserved bits on guest gpte
which is valid only for L1 guest, we should use arch.nested_mmu instead when
we translate gva to gpa for the L2 guest
Fix it by using @mmu instead since it is adapted to the current mmu mode
automatically
The bug can be triggered when nested npt is used and L1 guest and L2 guest
use different mmu mode
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After commit 21feb4eb64 tr base is zeroed
during vmexit. Set it to L1's HOST_TR_BASE. This should fix
https://bugzilla.kernel.org/show_bug.cgi?id=60679
Reported-by: Yongjie Ren <yongjie.ren@intel.com>
Reviewed-by: Arthur Chunqi Li <yzt356@gmail.com>
Tested-by: Yongjie Ren <yongjie.ren@intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
During nested vmentry into vm86 mode a vcpu state is found to be incorrect
because rflags does not have VM flag set since it is read from the cache
and has L1's value instead of L2's. If emulate_invalid_guest_state=1 L0
KVM tries to emulate it, but emulation does not work for nVMX and it
never should happen anyway. Fix that by using vmx_set_rflags() to set
rflags during nested vmentry which takes care of updating register cache.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This lets debugging work better during emulation of invalid
guest state.
This time the check is done after emulation, but before writeback
of the flags; we need to check the flags *before* execution of the
instruction, we cannot check singlestep_rip because the CS base may
have already been modified.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Conflicts:
arch/x86/kvm/x86.c
This lets debugging work better during emulation of invalid
guest state.
The check is done before emulating the instruction, and (in the case
of guest debugging) reuses EMULATE_DO_MMIO to exit with KVM_EXIT_DEBUG.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If posted interrupts are enabled, we can no longer track if an IRQ was
coalesced based on IRR. So drop this logic also from the classic
software path and simplify apic_test_and_set_irr to apic_set_irr.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
[KVM maintainers:
The underlying support for this is in perf/core now. So please merge
this patch into the KVM tree.]
This is not arch perfmon, but older CPUs will just ignore it. This makes
it possible to do at least some TSX measurements from a KVM guest
v2: Various fixes to address review feedback
v3: Ignore the bits when no CPUID. No #GP. Force raw events with TSX bits.
v4: Use reserved bits for #GP
v5: Remove obsolete argument
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When L2 exits to L1, segment infomations of L1 are not set correctly.
According to Intel SDM 27.5.2(Loading Host Segment and Descriptor
Table Registers), segment base/limit/access right of L1 should be
set to some designed value when L2 exits to L1. This patch fixes
this.
Signed-off-by: Arthur Chunqi Li <yzt356@gmail.com>
Reviewed-by: Gleb Natapov <gnatapov@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix read/write to IA32_FEATURE_CONTROL MSR in nested environment.
This patch simulate this MSR in nested_vmx and the default value is
0x0. BIOS should set it to 0x5 before VMXON. After setting the lock
bit, write to it will cause #GP(0).
Another QEMU patch is also needed to handle emulation of reset
and migration. Reset to vCPU should clear this MSR and migration
should reserve value of it.
This patch is based on Nadav's previous commit.
http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/88478
Signed-off-by: Nadav Har'El <nyh@math.technion.ac.il>
Signed-off-by: Arthur Chunqi Li <yzt356@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Void pointers don't need no casting, drop it.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Use a const pointer type instead of casting away the const qualifier
from const arrays. Keep the pointer array on the stack, nonetheless.
Making it static just increases the object size.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Set rflags after successfully emulateing VMXON/VMXOFF in VMX.
Signed-off-by: Arthur Chunqi Li <yzt356@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move nested_vmx_succeed/nested_vmx_failInvalid/nested_vmx_failValid
ahead of handle_vmon to eliminate double declaration in the same
file
Signed-off-by: Arthur Chunqi Li <yzt356@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that kvm_arch_memslots_updated() catches every increment of the
memslots->generation, checking if the mmio generation has reached its
maximum value is enough.
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is called right after the memslots is updated, i.e. when the result
of update_memslots() gets installed in install_new_memslots(). Since
the memslots needs to be updated twice when we delete or move a memslot,
kvm_arch_commit_memory_region() does not correspond to this exactly.
In the following patch, x86 will use this new API to check if the mmio
generation has reached its maximum value, in which case mmio sptes need
to be flushed out.
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, fast page fault incorrectly tries to fix mmio page fault when
the generation number is invalid (spte.gen != kvm.gen). It then returns
to guest to retry the fault since it sees the last spte is nonpresent.
This causes an infinite loop.
Since fast page fault only works for direct mmu, the issue exists when
1) tdp is enabled. It is only triggered only on AMD host since on Intel host
the mmio page fault is recognized as ept-misconfig whose handler call
fault-page path with error_code = 0
2) guest paging is disabled. Under this case, the issue is hardly discovered
since paging disable is short-lived and the sptes will be invalid after
memslot changed for 150 times
Fix it by filtering out MMIO page faults in page_fault_can_be_fast.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some userspaces do not preserve unusable property. Since usable
segment has to be present according to VMX spec we can use present
property to amend userspace bug by making unusable segment always
nonpresent. vmx_segment_access_rights() already marks nonpresent segment
as unusable.
Cc: stable@vger.kernel.org # 3.9+
Reported-by: Stefan Pietsch <stefan.pietsch@lsexperts.de>
Tested-by: Stefan Pietsch <stefan.pietsch@lsexperts.de>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On the x86 side, there are some optimizations and documentation updates.
The big ARM/KVM change for 3.11, support for AArch64, will come through
Catalin Marinas's tree. s390 and PPC have misc cleanups and bugfixes.
There is a conflict due to "s390/pgtable: fix ipte notify bit" having
entered 3.10 through Martin Schwidefsky's s390 tree. This pull request
has additional changes on top, so this tree's version is the correct one.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=1zpG
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"On the x86 side, there are some optimizations and documentation
updates. The big ARM/KVM change for 3.11, support for AArch64, will
come through Catalin Marinas's tree. s390 and PPC have misc cleanups
and bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (87 commits)
KVM: PPC: Ignore PIR writes
KVM: PPC: Book3S PR: Invalidate SLB entries properly
KVM: PPC: Book3S PR: Allow guest to use 1TB segments
KVM: PPC: Book3S PR: Don't keep scanning HPTEG after we find a match
KVM: PPC: Book3S PR: Fix invalidation of SLB entry 0 on guest entry
KVM: PPC: Book3S PR: Fix proto-VSID calculations
KVM: PPC: Guard doorbell exception with CONFIG_PPC_DOORBELL
KVM: Fix RTC interrupt coalescing tracking
kvm: Add a tracepoint write_tsc_offset
KVM: MMU: Inform users of mmio generation wraparound
KVM: MMU: document fast invalidate all mmio sptes
KVM: MMU: document fast invalidate all pages
KVM: MMU: document fast page fault
KVM: MMU: document mmio page fault
KVM: MMU: document write_flooding_count
KVM: MMU: document clear_spte_count
KVM: MMU: drop kvm_mmu_zap_mmio_sptes
KVM: MMU: init kvm generation close to mmio wrap-around value
KVM: MMU: add tracepoint for check_mmio_spte
KVM: MMU: fast invalidate all mmio sptes
...
Pull asm/x86 changes from Ingo Molnar:
"Misc changes, with a bigger processor-flags cleanup/reorganization by
Peter Anvin"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, asm, cleanup: Replace open-coded control register values with symbolic
x86, processor-flags: Fix the datatypes and add bit number defines
x86: Rename X86_CR4_RDWRGSFS to X86_CR4_FSGSBASE
x86, flags: Rename X86_EFLAGS_BIT1 to X86_EFLAGS_FIXED
linux/const.h: Add _BITUL() and _BITULL()
x86/vdso: Convert use of typedef ctl_table to struct ctl_table
x86: __force_order doesn't need to be an actual variable
This reverts most of the f1ed0450a5. After
the commit kvm_apic_set_irq() no longer returns accurate information
about interrupt injection status if injection is done into disabled
APIC. RTC interrupt coalescing tracking relies on the information to be
accurate and cannot recover if it is not.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Add a tracepoint write_tsc_offset for tracing TSC offset change.
We want to merge ftrace's trace data of guest OSs and the host OS using
TSC for timestamp in chronological order. We need "TSC offset" values for
each guest when merge those because the TSC value on a guest is always the
host TSC plus guest's TSC offset. If we get the TSC offset values, we can
calculate the host TSC value for each guest events from the TSC offset and
the event TSC value. The host TSC values of the guest events are used when we
want to merge trace data of guests and the host in chronological order.
(Note: the trace_clock of both the host and the guest must be set x86-tsc in
this case)
This tracepoint also records vcpu_id which can be used to merge trace data for
SMP guests. A merge tool will read TSC offset for each vcpu, then the tool
converts guest TSC values to host TSC values for each vcpu.
TSC offset is stored in the VMCS by vmx_write_tsc_offset() or
vmx_adjust_tsc_offset(). KVM executes the former function when a guest boots.
The latter function is executed when kvm clock is updated. Only host can read
TSC offset value from VMCS, so a host needs to output TSC offset value
when TSC offset is changed.
Since the TSC offset is not often changed, it could be overwritten by other
frequent events while tracing. To avoid that, I recommend to use a special
instance for getting this event:
1. set a instance before booting a guest
# cd /sys/kernel/debug/tracing/instances
# mkdir tsc_offset
# cd tsc_offset
# echo x86-tsc > trace_clock
# echo 1 > events/kvm/kvm_write_tsc_offset/enable
2. boot a guest
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Without this information, users will just see unexpected performance
problems and there is little chance we will get good reports from them:
note that mmio generation is increased even when we just start, or stop,
dirty logging for some memory slot, in which case users cannot expect
all shadow pages to be zapped.
printk_ratelimited() is used for this taking into account the problems
that we can see the information many times when we start multiple VMs
and guests can trigger this by reading ROM in a loop for example.
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Document it to Documentation/virtual/kvm/mmu.txt
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_mmu_zap_mmio_sptes and use kvm_mmu_invalidate_zap_all_pages
instead to handle mmio generation number overflow
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Then it has the chance to trigger mmio generation number wrap-around
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
[Change from MMIO_MAX_GEN - 13 to MMIO_MAX_GEN - 150, because 13 is
very close to the number of calls to KVM_SET_USER_MEMORY_REGION
before the guest is started and there is any chance to create any
spte. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch tries to introduce a very simple and scale way to invalidate
all mmio sptes - it need not walk any shadow pages and hold mmu-lock
KVM maintains a global mmio valid generation-number which is stored in
kvm->memslots.generation and every mmio spte stores the current global
generation-number into his available bits when it is created
When KVM need zap all mmio sptes, it just simply increase the global
generation-number. When guests do mmio access, KVM intercepts a MMIO #PF
then it walks the shadow page table and get the mmio spte. If the
generation-number on the spte does not equal the global generation-number,
it will go to the normal #PF handler to update the mmio spte
Since 19 bits are used to store generation-number on mmio spte, we zap all
mmio sptes when the number is round
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Store the generation-number into bit3 ~ bit11 and bit52 ~ bit61, totally
19 bits can be used, it should be enough for nearly all most common cases
In this patch, the generation-number is always 0, it will be changed in
the later patch
[Gleb: masking generation bits from spte in get_mmio_spte_gfn() and
get_mmio_spte_access()]
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bit 1 in the x86 EFLAGS is always set. Name the macro something that
actually tries to explain what it is all about, rather than being a
tautology.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lkml.kernel.org/n/tip-f10rx5vjjm6tfnt8o1wseb3v@git.kernel.org
Let mmio spte only use bit62 and bit63 on upper 32 bits, then bit 52 ~ bit 61
can be used for other purposes
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
__kvm_set_xcr function does the CPL check when set xcr. __kvm_set_xcr is
called in two flows, one is invoked by guest, call stack shown as below,
handle_xsetbv(or xsetbv_interception)
kvm_set_xcr
__kvm_set_xcr
the other one is invoked by host, for example during system reset:
kvm_arch_vcpu_ioctl
kvm_vcpu_ioctl_x86_set_xcrs
__kvm_set_xcr
The former does need the CPL check, but the latter does not.
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Haoyu <haoyu.zhang@huawei.com>
[Tweaks to commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Its possible that idivl overflows (due to large delta stored in usdiff,
valid scenario).
Create an exception handler to catch the overflow exception (division by zero
is protected by vcpu->arch.virtual_tsc_khz check), and interpret it accordingly
(delta is larger than USEC_PER_SEC).
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=969644
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Quote Gleb's mail:
| why don't we check for sp->role.invalid in
| kvm_mmu_prepare_zap_page before calling kvm_reload_remote_mmus()?
and
| Actually we can add check for is_obsolete_sp() there too since
| kvm_mmu_invalidate_all_pages() already calls kvm_reload_remote_mmus()
| after incrementing mmu_valid_gen.
[ Xiao: add some comments and the check of is_obsolete_sp() ]
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
As Marcelo pointed out that
| "(retention of large number of pages while zapping)
| can be fatal, it can lead to OOM and host crash"
We introduce a list, kvm->arch.zapped_obsolete_pages, to link all
the pages which are deleted from the mmu cache but not actually
freed. When page reclaiming is needed, we always zap this kind of
pages first.
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
kvm_zap_obsolete_pages uses lock-break technique to zap pages,
it will flush tlb every time when it does lock-break
We can reload mmu on all vcpus after updating the generation
number so that the obsolete pages are not used on any vcpus,
after that we do not need to flush tlb when obsolete pages
are zapped
It will do kvm_mmu_prepare_zap_page many times and use one
kvm_mmu_commit_zap_page to collapse tlb flush, the side-effects
is that causes obsolete pages unlinked from active_list but leave
on hash-list, so we add the comment around the hash list walker
Note: kvm_mmu_commit_zap_page is still needed before free
the pages since other vcpus may be doing locklessly shadow
page walking
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Zap at lease 10 pages before releasing mmu-lock to reduce the overload
caused by requiring lock
After the patch, kvm_zap_obsolete_pages can forward progress anyway,
so update the comments
[ It improves the case 0.6% ~ 1% that do kernel building meanwhile read
PCI ROM. ]
Note: i am not sure that "10" is the best speculative value, i just
guessed that '10' can make vcpu do not spend long time on
kvm_zap_obsolete_pages and do not cause mmu-lock too hungry.
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
The obsolete page will be zapped soon, do not reuse it to
reduce future page fault
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
It is good for debug and development
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
The current kvm_mmu_zap_all is really slow - it is holding mmu-lock to
walk and zap all shadow pages one by one, also it need to zap all guest
page's rmap and all shadow page's parent spte list. Particularly, things
become worse if guest uses more memory or vcpus. It is not good for
scalability
In this patch, we introduce a faster way to invalidate all shadow pages.
KVM maintains a global mmu invalid generation-number which is stored in
kvm->arch.mmu_valid_gen and every shadow page stores the current global
generation-number into sp->mmu_valid_gen when it is created
When KVM need zap all shadow pages sptes, it just simply increase the
global generation-number then reload root shadow pages on all vcpus.
Vcpu will create a new shadow page table according to current kvm's
generation-number. It ensures the old pages are not used any more.
Then the obsolete pages (sp->mmu_valid_gen != kvm->arch.mmu_valid_gen)
are zapped by using lock-break technique
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
It is the responsibility of kvm_mmu_zap_all that keeps the
consistent of mmu and tlbs. And it is also unnecessary after
zap all mmio sptes since no mmio spte exists on root shadow
page and it can not be cached into tlb
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Quote Gleb's mail:
| Back then kvm->lock protected memslot access so code like:
|
| mutex_lock(&vcpu->kvm->lock);
| kvm_mmu_zap_all(vcpu->kvm);
| mutex_unlock(&vcpu->kvm->lock);
|
| which is what 7aa81cc0 does was enough to guaranty that no vcpu will
| run while code is patched. This is no longer the case and
| mutex_lock(&vcpu->kvm->lock); is gone from that code path long time ago,
| so now kvm_mmu_zap_all() there is useless and the code is incorrect.
So we drop it and it will be fixed later
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
apic->pending_events processing has a race that may cause INIT and
SIPI
processing to be reordered:
vpu0: vcpu1:
set INIT
test_and_clear_bit(KVM_APIC_INIT)
process INIT
set INIT
set SIPI
test_and_clear_bit(KVM_APIC_SIPI)
process SIPI
At the end INIT is left pending in pending_events. The following patch
fixes this by latching pending event before processing them.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
The x86-64 extended low-byte registers were fetched correctly from reg,
but not from mod/rm.
This fixes another bug in the boot of RHEL5.9 64-bit, but it is still
not enough.
Cc: <stable@vger.kernel.org> # 3.9
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
This is encountered when booting RHEL5.9 64-bit. There is another bug
after this one that is not a simple emulation failure, but this one lets
the boot proceed a bit.
Cc: <stable@vger.kernel.org> # 3.9
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Since DIV and IDIV can generate exceptions, we need an additional output
parameter indicating whether an execption has occured. To avoid increasing
register pressure on i386, we use %rsi, which is already allocated for
the fastop code pointer.
Gleb: added comment about fop usage as exception indication.
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Single-operand MUL and DIV access an extended accumulator: AX for byte
instructions, and DX:AX, EDX:EAX, or RDX:RAX for larger-sized instructions.
Add support for fetching the extended accumulator.
In order not to change things too much, RDX is loaded into Src2, which is
already loaded by fastop(). This avoids increasing register pressure on
i386.
Gleb: disable src writeback for ByteOp div/mul.
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Some instructions write back the source operand, not just the destination.
Add support for doing this via the decode flags.
Gleb: add BUG_ON() to prevent source to be memory operand.
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
As requested by the KVM maintainers, remove the addprefix used to
refer to the main KVM code from the arch code, and replace it with
a KVM variable that does the same thing.
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Christoffer Dall <cdall@cs.columbia.edu>
Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Do locking around each case separately instead of having one lock and two
unlocks. Move root_hpa assignment out of the lock.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
kvmclock updates which are isolated to a given vcpu, such as vcpu->cpu
migration, should not allow system_timestamp from the rest of the vcpus
to remain static. Otherwise ntp frequency correction applies to one
vcpu's system_timestamp but not the others.
So in those cases, request a kvmclock update for all vcpus. The worst
case for a remote vcpu to update its kvmclock is then bounded by maximum
nohz sleep latency.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Since the arrival of posted interrupt support we can no longer guarantee
that coalesced IRQs are always reported to the IRQ source. Moreover,
accumulated APIC timer events could cause a busy loop when a VCPU should
rather be halted. The consensus is to remove coalesced tracking from the
LAPIC.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
No need to open-code this function.
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
This is an almost-undocumented instruction available in 32-bit mode.
I say "almost" undocumented because AMD documents it in their opcode
maps just to say that it is unavailable in 64-bit mode (sections
"A.2.1 One-Byte Opcodes" and "B.3 Invalid and Reassigned Instructions
in 64-Bit Mode").
It is roughly equivalent to "sbb %al, %al" except it does not
set the flags. Use fastop to emulate it, but do not use the opcode
directly because it would fail if the host is 64-bit!
Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: stable@vger.kernel.org # 3.9
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
This is used by SGABIOS, KVM breaks with emulate_invalid_guest_state=1.
It is just a MOV in disguise, with a funny source address.
Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: stable@vger.kernel.org # 3.9
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
This is used by SGABIOS, KVM breaks with emulate_invalid_guest_state=1.
AAM needs the source operand to be unsigned; do the same in AAD as well
for consistency, even though it does not affect the result.
Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: stable@vger.kernel.org # 3.9
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
The invalid guest state emulation loop does not check halt_request
which causes 100% cpu loop while guest is in halt and in invalid
state, but more serious issue is that this leaves halt_request set, so
random instruction emulated by vm86 #GP exit can be interpreted
as halt which causes guest hang. Fix both problems by handling
halt_request in emulation loop.
Reported-by: Tomas Papan <tomas.papan@gmail.com>
Tested-by: Tomas Papan <tomas.papan@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
CC: stable@vger.kernel.org
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Emulation of xcr0 writes zero guest_xcr0_loaded variable so that
subsequent VM-entry reloads CPU's xcr0 with guests xcr0 value.
However, this is incorrect because guest_xcr0_loaded variable is
read to decide whether to reload hosts xcr0.
In case the vcpu thread is scheduled out after the guest_xcr0_loaded = 0
assignment, and scheduler decides to preload FPU:
switch_to
{
__switch_to
__math_state_restore
restore_fpu_checking
fpu_restore_checking
if (use_xsave())
fpu_xrstor_checking
xrstor64 with CPU's xcr0 == guests xcr0
Fix by properly restoring hosts xcr0 during emulation of xcr0 writes.
Analyzed-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Pull kvm updates from Gleb Natapov:
"Highlights of the updates are:
general:
- new emulated device API
- legacy device assignment is now optional
- irqfd interface is more generic and can be shared between arches
x86:
- VMCS shadow support and other nested VMX improvements
- APIC virtualization and Posted Interrupt hardware support
- Optimize mmio spte zapping
ppc:
- BookE: in-kernel MPIC emulation with irqfd support
- Book3S: in-kernel XICS emulation (incomplete)
- Book3S: HV: migration fixes
- BookE: more debug support preparation
- BookE: e6500 support
ARM:
- reworking of Hyp idmaps
s390:
- ioeventfd for virtio-ccw
And many other bug fixes, cleanups and improvements"
* tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
kvm: Add compat_ioctl for device control API
KVM: x86: Account for failing enable_irq_window for NMI window request
KVM: PPC: Book3S: Add API for in-kernel XICS emulation
kvm/ppc/mpic: fix missing unlock in set_base_addr()
kvm/ppc: Hold srcu lock when calling kvm_io_bus_read/write
kvm/ppc/mpic: remove users
kvm/ppc/mpic: fix mmio region lists when multiple guests used
kvm/ppc/mpic: remove default routes from documentation
kvm: KVM_CAP_IOMMU only available with device assignment
ARM: KVM: iterate over all CPUs for CPU compatibility check
KVM: ARM: Fix spelling in error message
ARM: KVM: define KVM_ARM_MAX_VCPUS unconditionally
KVM: ARM: Fix API documentation for ONE_REG encoding
ARM: KVM: promote vfp_host pointer to generic host cpu context
ARM: KVM: add architecture specific hook for capabilities
ARM: KVM: perform HYP initilization for hotplugged CPUs
ARM: KVM: switch to a dual-step HYP init code
ARM: KVM: rework HYP page table freeing
ARM: KVM: enforce maximum size for identity mapped code
ARM: KVM: move to a KVM provided HYP idmap
...
With VMX, enable_irq_window can now return -EBUSY, in which case an
immediate exit shall be requested before entering the guest. Account for
this also in enable_nmi_window which uses enable_irq_window in absence
of vnmi support, e.g.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Pull x86 paravirt update from Ingo Molnar:
"Various paravirtualization related changes - the biggest one makes
guest support optional via CONFIG_HYPERVISOR_GUEST"
* 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, wakeup, sleep: Use pvops functions for changing GDT entries
x86, xen, gdt: Remove the pvops variant of store_gdt.
x86-32, gdt: Store/load GDT for ACPI S3 or hibernation/resume path is not needed
x86-64, gdt: Store/load GDT for ACPI S3 or hibernate/resume path is not needed.
x86: Make Linux guest support optional
x86, Kconfig: Move PARAVIRT_DEBUG into the paravirt menu
Fix build with CONFIG_PCI unset by linking KVM_CAP_IOMMU to
device assignment config option. It has no purpose otherwise.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
While a nested run is pending, vmx_queue_exception is only called to
requeue exceptions that were previously picked up via
vmx_cancel_injection. Therefore, we must not check for PF interception
by L1, possibly causing a bogus nested vmexit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
We hope to at some point deprecate KVM legacy device assignment in
favor of VFIO-based assignment. Towards that end, allow legacy
device assignment to be deconfigured.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
The VMX implementation of enable_irq_window raised
KVM_REQ_IMMEDIATE_EXIT after we checked it in vcpu_enter_guest. This
caused infinite loops on vmentry. Fix it by letting enable_irq_window
signal the need for an immediate exit via its return value and drop
KVM_REQ_IMMEDIATE_EXIT.
This issue only affects nested VMX scenarios.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
It is "exit_int_info". It is actually EXITINTINFO in the official docs
but we don't like screaming docs.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Now that we have most irqfd code completely platform agnostic, let's move
irqfd's resample capability return to generic code as well.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
The current irq_comm.c file contains pieces of code that are generic
across different irqchip implementations, as well as code that is
fully IOAPIC specific.
Split the generic bits out into irqchip.c.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Quite a bit of code in KVM has been conditionalized on availability of
IOAPIC emulation. However, most of it is generically applicable to
platforms that don't have an IOPIC, but a different type of irq chip.
Make code that only relies on IRQ routing, not an APIC itself, on
CONFIG_HAVE_KVM_IRQ_ROUTING, so that we can reuse it later.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Source operand for one byte mov[zs]x is decoded incorrectly if it is in
high byte register. Fix that.
Cc: stable@vger.kernel.org
Signed-off-by: Gleb Natapov <gleb@redhat.com>
If we load the complete EFER MSR on entry or exit, EFER.LMA (and LME)
loading is skipped. Their consistency is already checked now before
starting the transition.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
As we may emulate the loading of EFER on VM-entry and VM-exit, implement
the checks that VMX performs on the guest and host values on vmlaunch/
vmresume. Factor out kvm_valid_efer for this purpose which checks for
set reserved bits.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
The logic for checking if interrupts can be injected has to be applied
also on NMIs. The difference is that if NMI interception is on these
events are consumed and blocked by the VM exit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
vmx_set_nmi_mask will soon be used by vmx_nmi_allowed. No functional
changes.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
If userspace creates and destroys multiple VMs within the same process
we leak 20k of memory in the userspace process context per VM. This
patch frees the memory in kvm_arch_destroy_vm. If the process exits
without closing the VM file descriptor or the file descriptor has been
shared with another process then we don't free the memory.
It's still possible for a user space process to leak memory if the last
process to close the fd for the VM is not the process that created it.
However, this is an unexpected case that's only caused by a user space
process that's misbehaving.
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Once L1 loads VMCS12 we enable shadow-vmcs capability and copy all the VMCS12
shadowed fields to the shadow vmcs. When we release the VMCS12, we also
disable shadow-vmcs capability.
Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Synchronize between the VMCS12 software controlled structure and the
processor-specific shadow vmcs
Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Introduce a function used to copy fields from the software controlled VMCS12
to the processor-specific shadow vmcs
Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Introduce a function used to copy fields from the processor-specific shadow
vmcs to the software controlled VMCS12
Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Unmap vmcs12 and release the corresponding shadow vmcs
Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Allocate a shadow vmcs used by the processor to shadow part of the fields
stored in the software defined VMCS12 (let L1 access fields without causing
exits). Note we keep a shadow vmcs only for the current vmcs12. Once a vmcs12
becomes non-current, its shadow vmcs is released.
Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
handle_vmon doesn't check if L1 is already in root mode (VMXON
was previously called). This patch adds this missing check and calls
nested_vmx_failValid if VMX is already ON.
We need this check because L0 will allocate the shadow vmcs when L1
executes VMXON and we want to avoid host leaks (due to shadow vmcs
allocation) if L1 executes VMXON repeatedly.
Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Refactor existent code so we re-use vmcs12_write_any to copy fields from the
shadow vmcs specified by the link pointer (used by the processor,
implementation-specific) to the VMCS12 software format used by L0 to hold
the fields in L1 memory address space.
Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Prepare vmread and vmwrite bitmaps according to a pre-specified list of fields.
These lists are intended to specifiy most frequent accessed fields so we can
minimize the number of fields that are copied from/to the software controlled
VMCS12 format to/from to processor-specific shadow vmcs. The lists were built
measuring the VMCS fields access rate after L2 Ubuntu 12.04 booted when it was
running on top of L1 KVM, also Ubuntu 12.04. Note that during boot there were
additional fields which were frequently modified but they were not added to
these lists because after boot these fields were not longer accessed by L1.
Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Add logic required to detect if shadow-vmcs is supported by the
processor. Introduce a new kernel module parameter to specify if L0 should use
shadow vmcs (or not) to run L1.
Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
If guest vcpu is in VM86 mode the vcpu state should be checked as if in
real mode.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
KVM does not use the activity state VMCS field, and does not support
it in nested VMX either (the corresponding bits in the misc VMX feature
MSR are zero). Fail entry if the activity state is set to anything but
"active".
Since the value will always be the same for L1 and L2, we do not need
to read and write the corresponding VMCS field on L1/L2 transitions,
either.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If posted interrupt is avaliable, then uses it to inject virtual
interrupt to guest.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Only deliver the posted interrupt when target vcpu is running
and there is no previous interrupt pending in pir.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We already know the trigger mode of a given interrupt when programming
the ioapice entry. So it's not necessary to set it in each interrupt
delivery.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Both TMR and EOI exit bitmap need to be updated when ioapic changed
or vcpu's id/ldr/dfr changed. So use common function instead eoi exit
bitmap specific function.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Detect the posted interrupt feature. If it exists, then set it in vmcs_config.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The "acknowledge interrupt on exit" feature controls processor behavior
for external interrupt acknowledgement. When this control is set, the
processor acknowledges the interrupt controller to acquire the
interrupt vector on VM exit.
After enabling this feature, an interrupt which arrived when target cpu is
running in vmx non-root mode will be handled by vmx handler instead of handler
in idt. Currently, vmx handler only fakes an interrupt stack and jump to idt
table to let real handler to handle it. Further, we will recognize the interrupt
and only delivery the interrupt which not belong to current vcpu through idt table.
The interrupt which belonged to current vcpu will be handled inside vmx handler.
This will reduce the interrupt handle cost of KVM.
Also, interrupt enable logic is changed if this feature is turnning on:
Before this patch, hypervior call local_irq_enable() to enable it directly.
Now IF bit is set on interrupt stack frame, and will be enabled on a return from
interrupt handler if exterrupt interrupt exists. If no external interrupt, still
call local_irq_enable() to enable it.
Refer to Intel SDM volum 3, chapter 33.2.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Userspace may deliver RTC interrupt without query the status. So we
want to track RTC EOI for this case.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Add a new parameter to know vcpus who received the interrupt.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Add vcpu info to ioapic_update_eoi, so we can know which vcpu
issued this EOI.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We only need to update vm_exit_intr_error_code if there is a valid exit
interruption information and it comes with a valid error code.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
If we are entering guest mode, we do not want L0 to interrupt this
vmentry with all its side effects on the vmcs. Therefore, injection
shall be disallowed during L1->L2 transitions, as in the previous
version. However, this check is conceptually independent of
nested_exit_on_intr, so decouple it.
If L1 traps external interrupts, we can kick the guest from L2 to L1,
also just like the previous code worked. But we no longer need to
consider L1's idt_vectoring_info_field. It will always be empty at this
point. Instead, if L2 has pending events, those are now found in the
architectural queues and will, thus, prevent vmx_interrupt_allowed from
being called at all.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
The basic idea is to always transfer the pending event injection on
vmexit into the architectural state of the VCPU and then drop it from
there if it turns out that we left L2 to enter L1, i.e. if we enter
prepare_vmcs12.
vmcs12_save_pending_events takes care to transfer pending L0 events into
the queue of L1. That is mandatory as L1 may decide to switch the guest
state completely, invalidating or preserving the pending events for
later injection (including on a different node, once we support
migration).
This concept is based on the rule that a pending vmlaunch/vmresume is
not canceled. Otherwise, we would risk to lose injected events or leak
them into the wrong queues. Encode this rule via a WARN_ON_ONCE at the
entry of nested_vmx_vmexit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Check if the interrupt or NMI window exit is for L1 by testing if it has
the corresponding controls enabled. This is required when we allow
direct injection from L0 to L2
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Emulation of undefined opcode should inject #UD instead of causing
emulation failure. Do that by moving Undefined flag check to emulation
stage and injection #UD there.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
During invalid guest state emulation vcpu cannot enter guest mode to try
to reexecute instruction that emulator failed to emulate, so emulation
will happen again and again. Prevent that by telling the emulator that
instruction reexecution should not be attempted.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Unimplemented instruction detection is broken for group instructions
since it relies on "flags" field of opcode to be zero, but all
instructions in a group inherit flags from a group encoding. Fix that by
having a separate flag for unimplemented instructions.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
The two use-cases where we needed to store the GDT were during ACPI S3 suspend
and resume. As the patches:
x86/gdt/i386: store/load GDT for ACPI S3 or hibernation/resume path is not needed
x86/gdt/64-bit: store/load GDT for ACPI S3 or hibernate/resume path is not needed.
have demonstrated - there are other mechanism by which the GDT is
saved and reloaded during early resume path.
Hence we do not need to worry about the pvops call-chain for saving the
GDT and can and can eliminate it. The other areas where the store_gdt is
used are never going to be hit when running under the pvops platforms.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/1365194544-14648-4-git-send-email-konrad.wilk@oracle.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This fixes a regression introduced in commit 03ebebeb1 ("KVM: x86
emulator: Leave segment limit and attributs alone in real mode").
The mentioned commit changed the segment descriptors for both real mode
and VM86 to only update the segment base instead of creating a
completely new descriptor with limit 0xffff so that unreal mode keeps
working across a segment register reload.
This leads to an invalid segment descriptor in the eyes of VMX, which
seems to be okay for real mode because KVM will fix it up before the
next VM entry or emulate the state, but it doesn't do this if the guest
is in VM86, so we end up with:
KVM: entry failed, hardware error 0x80000021
Fix this by effectively reverting commit 03ebebeb1 for VM86 and leaving
it only in place for real mode, which is where it's really needed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
The routine kvm_spurious_fault() is an x86 specific routine, so
move it from virt/kvm/kvm_main.c to arch/x86/kvm/x86.c.
Fixes this sparse warning when building on arm64:
virt/kvm/kvm_main.c⚠️ symbol 'kvm_spurious_fault' was not declared. Should it be static?
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
The code was already properly aligned, now also add the braces to avoid
that err is checked even if alloc_apic_access_page didn't run and change
it. Found via Coccinelle by Fengguang Wu.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Free vmx_msr_bitmap_longmode_x2apic and vmx_msr_bitmap_longmode if
kvm_init() fails.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Obviously a copy&paste mistake: prepare_vmcs12 has to check L1's exit
controls for VM_EXIT_SAVE_IA32_PAT.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
For a given vcpu, kvm_apic_match_dest() will tell you whether
the vcpu in the destination list quickly. Drop kvm_calculate_eoi_exitmap()
and use kvm_apic_match_dest() instead.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
With the following commit, shadow pages can be zapped at random during
a shadow page talbe walk:
KVM: MMU: Move kvm_mmu_free_some_pages() into kvm_mmu_alloc_page()
7ddca7e43c
This patch reverts it and fixes __direct_map() and FNAME(fetch)().
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
This patch adds support for kvm_gfn_to_hva_cache_init functions for
reads and writes that will cross a page. If the range falls within
the same memslot, then this will be a fast operation. If the range
is split between two memslots, then the slower kvm_read_guest and
kvm_write_guest are used.
Tested: Test against kvm_clock unit tests.
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Convert the AMD erratum 383 testing code to the bug infrastructure. This
allows keeping the AMD-specific erratum testing machinery private to
amd.c and not export symbols to modules needlessly.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1363788448-31325-6-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
In order to migrate the PMU state correctly, we need to restore the
values of MSR_CORE_PERF_GLOBAL_STATUS (a read-only register) and
MSR_CORE_PERF_GLOBAL_OVF_CTRL (which has side effects when written).
We also need to write the full 40-bit value of the performance counter,
which would only be possible with a v3 architectural PMU's full-width
counter MSRs.
To distinguish host-initiated writes from the guest's, pass the
full struct msr_data to kvm_pmu_set_msr.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
The current name "kvm_mmu_free_some_pages" should be used for something
that actually frees some shadow pages, as we expect from the name, but
what the function is doing is to make some, KVM_MIN_FREE_MMU_PAGES,
shadow pages available: it does nothing when there are enough.
This patch changes the name to reflect this meaning better; while doing
this renaming, the code in the wrapper function is inlined into the main
body since the whole function will be inlined into the only caller now.
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
What this function is doing is to ensure that the number of shadow pages
does not exceed the maximum limit stored in n_max_mmu_pages: so this is
placed at every code path that can reach kvm_mmu_alloc_page().
Although it might have some sense to spread this function in each such
code path when it could be called before taking mmu_lock, the rule was
changed not to do so.
Taking this background into account, this patch moves it into
kvm_mmu_alloc_page() and simplifies the code.
Note: the unlikely hint in kvm_mmu_free_some_pages() guarantees that the
overhead of this function is almost zero except when we actually need to
allocate some shadow pages, so we do not need to care about calling it
multiple times in one path by doing kvm_mmu_get_page() a few times.
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Merge reason:
From: Alexander Graf <agraf@suse.de>
"Just recently this really important patch got pulled into Linus' tree for 3.9:
commit 1674400aae
Author: Anton Blanchard <anton <at> samba.org>
Date: Tue Mar 12 01:51:51 2013 +0000
Without that commit, I can not boot my G5, thus I can't run automated tests on it against my queue.
Could you please merge kvm/next against linus/master, so that I can base my trees against that?"
* upstream/master: (653 commits)
PCI: Use ROM images from firmware only if no other ROM source available
sparc: remove unused "config BITS"
sparc: delete "if !ULTRA_HAS_POPULATION_COUNT"
KVM: Fix bounds checking in ioapic indirect register reads (CVE-2013-1798)
KVM: x86: Convert MSR_KVM_SYSTEM_TIME to use gfn_to_hva_cache functions (CVE-2013-1797)
KVM: x86: fix for buffer overflow in handling of MSR_KVM_SYSTEM_TIME (CVE-2013-1796)
arm64: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS
arm64: Do not select GENERIC_HARDIRQS_NO_DEPRECATED
inet: limit length of fragment queue hash table bucket lists
qeth: Fix scatter-gather regression
qeth: Fix invalid router settings handling
qeth: delay feature trace
sgy-cts1000: Remove __dev* attributes
KVM: x86: fix deadlock in clock-in-progress request handling
KVM: allow host header to be included even for !CONFIG_KVM
hwmon: (lm75) Fix tcn75 prefix
hwmon: (lm75.h) Update header inclusion
MAINTAINERS: Remove Mark M. Hoffman
xfs: ensure we capture IO errors correctly
xfs: fix xfs_iomap_eof_prealloc_initial_size type
...
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The CS base was initialized to 0 on VMX (wrong, but usually overridden
by userspace before starting) or 0xf0000 on SVM. The correct value is
0xffff0000, and VMX is able to emulate it now, so use it.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
There is a potential use after free issue with the handling of
MSR_KVM_SYSTEM_TIME. If the guest specifies a GPA in a movable or removable
memory such as frame buffers then KVM might continue to write to that
address even after it's removed via KVM_SET_USER_MEMORY_REGION. KVM pins
the page in memory so it's unlikely to cause an issue, but if the user
space component re-purposes the memory previously used for the guest, then
the guest will be able to corrupt that memory.
Tested: Tested against kvmclock unit test
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If the guest sets the GPA of the time_page so that the request to update the
time straddles a page then KVM will write onto an incorrect page. The
write is done byusing kmap atomic to get a pointer to the page for the time
structure and then performing a memcpy to that page starting at an offset
that the guest controls. Well behaved guests always provide a 32-byte aligned
address, however a malicious guest could use this to corrupt host kernel
memory.
Tested: Tested against kvmclock unit test.
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
There is a deadlock in pvclock handling:
cpu0: cpu1:
kvm_gen_update_masterclock()
kvm_guest_time_update()
spin_lock(pvclock_gtod_sync_lock)
local_irq_save(flags)
spin_lock(pvclock_gtod_sync_lock)
kvm_make_mclock_inprogress_request(kvm)
make_all_cpus_request()
smp_call_function_many()
Now if smp_call_function_many() called by cpu0 tries to call function on
cpu1 there will be a deadlock.
Fix by moving pvclock_gtod_sync_lock protected section outside irq
disabled section.
Analyzed by Gleb Natapov <gleb@redhat.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Reported-and-Tested-by: Yongjie Ren <yongjie.ren@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Very old user space (namely qemu-kvm before kvm-49) didn't set the TSS
base before running the VCPU. We always warned about this bug, but no
reports about users actually seeing this are known. Time to finally
remove the workaround that effectively prevented to call vmx_vcpu_reset
while already holding the KVM srcu lock.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When we create or move a memory slot, we need to zap mmio sptes.
Currently, zap_all() is used for this and this is causing two problems:
- extra page faults after zapping mmu pages
- long mmu_lock hold time during zapping mmu pages
For the latter, Marcelo reported a disastrous mmu_lock hold time during
hot-plug, which made the guest unresponsive for a long time.
This patch takes a simple way to fix these problems: do not zap mmu
pages unless they are marked mmio cached. On our test box, this took
only 50us for the 4GB guest and we did not see ms of mmu_lock hold time
any more.
Note that we still need to do zap_all() for other cases. So another
work is also needed: Xiao's work may be the one.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
This will be used not to zap unrelated mmu pages when creating/moving
a memory slot later.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Provided the host has this feature, it's straightforward to offer it to
the guest as well. We just need to load to timer value on L2 entry if
the feature was enabled by L1 and watch out for the corresponding exit
reason.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
We will need EFER.LMA saving to provide unrestricted guest mode. All
what is missing for this is picking up EFER.LMA from VM_ENTRY_CONTROLS
on L2->L1 switches. If the host does not support EFER.LMA saving,
no change is performed, otherwise we properly emulate for L1 what the
hardware does for L0. Advertise the support, depending on the host
feature.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Only interrupt and NMI exiting are mandatory for KVM to work, thus can
be exposed to the guest unconditionally, virtual NMI exiting is
optional. So we must not advertise it unless the host supports it.
Introduce the symbolic constant PIN_BASED_ALWAYSON_WITHOUT_TRUE_MSR at
this chance.
Reviewed-by:: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
A VCPU sending INIT or SIPI to some other VCPU races for setting the
remote VCPU's mp_state. When we were unlucky, KVM_MP_STATE_INIT_RECEIVED
was overwritten by kvm_emulate_halt and, thus, got lost.
This introduces APIC events for those two signals, keeping them in
kvm_apic until kvm_apic_accept_events is run over the target vcpu
context. kvm_apic_has_events reports to kvm_arch_vcpu_runnable if there
are pending events, thus if vcpu blocking should end.
The patch comes with the side effect of effectively obsoleting
KVM_MP_STATE_SIPI_RECEIVED. We still accept it from user space, but
immediately translate it to KVM_MP_STATE_INIT_RECEIVED + KVM_APIC_SIPI.
The vcpu itself will no longer enter the KVM_MP_STATE_SIPI_RECEIVED
state. That also means we no longer exit to user space after receiving a
SIPI event.
Furthermore, we already reset the VCPU on INIT, only fixing up the code
segment later on when SIPI arrives. Moreover, we fix INIT handling for
the BSP: it never enter wait-for-SIPI but directly starts over on INIT.
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
As noticed by Ulrich Obergfell <uobergfe@redhat.com>, the mmu
counters are for beancounting purposes only - so n_used_mmu_pages and
n_max_mmu_pages could be relaxed (example: before f0f5933a16),
resulting in n_used_mmu_pages > n_max_mmu_pages.
Make code robust against n_used_mmu_pages > n_max_mmu_pages.
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Neither vmx nor svm nor the common part may generate an error on
kvm_vcpu_reset. So drop the return code.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
If the host TSC calibration fails, tsc_khz is zero (see tsc_init.c).
Handle such case properly in KVM (instead of dividing by zero).
https://bugzilla.redhat.com/show_bug.cgi?id=859282
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Make the code for zapping the oldest mmu page, placed at the tail of the
active list, a separate function.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We are traversing the linked list, invalid_list, deleting each entry by
kvm_mmu_free_page(). _safe version is there for such a case.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The expression (sp)->gfn should not be expanded using @gfn.
Although no user of these macros passes a string other than gfn now,
this should be fixed before anyone sees strange errors.
Note: ignored the following checkpatch errors:
ERROR: Macros with complex values should be enclosed in parenthesis
ERROR: trailing statements should be on next line
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The logic for calculating the value with which we call kvm_set_cr0/4 was
broken (will definitely be visible with nested unrestricted guest mode
support). Also, we performed the check regarding CR0_ALWAYSON too early
when in guest mode.
What really needs to be done on both CR0 and CR4 is to mask out L1-owned
bits and merge them in from L1's guest_cr0/4. In contrast, arch.cr0/4
and arch.cr0/4_guest_owned_bits contain the mangled L0+L1 state and,
thus, are not suited as input.
For both CRs, we can then apply the check against VMXON_CRx_ALWAYSON and
refuse the update if it fails. To be fully consistent, we implement this
check now also for CR4. For CR4, we move the check into vmx_set_cr4
while we keep it in handle_set_cr0. This is because the CR0 checks for
vmxon vs. guest mode will diverge soon when adding unrestricted guest
mode support.
Finally, we have to set the shadow to the value L2 wanted to write
originally.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Properly set those bits to 1 that the spec demands in case bit 55 of
VMX_BASIC is 0 - like in our case.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Ouch, how could this work so well that far? We need to clear RFLAGS to
the reset value as specified by the SDM. Particularly, IF must be off
after VM-exit!
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
First of all, do not blindly overwrite GUEST_DR7 on L2 entry. The host
may have guest debugging enabled. Then properly reset DR7 and DEBUG_CTL
on L2->L1 switch as specified in the SDM.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch makes the parameter old a const pointer to the old memory
slot and adds a new parameter named change to know the change being
requested: the former is for removing extra copying and the latter is
for cleaning up the code.
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch drops the parameter old, a copy of the old memory slot, and
adds a new parameter named change to know the change being requested.
This not only cleans up the code but also removes extra copying of the
memory slot structure.
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Except ia64's stale code, KVM_SET_MEMORY_REGION support, this is only
used for sanity checks in __kvm_set_memory_region() which can easily
be changed to use slot id instead.
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
X86 does not use this any more. The remaining user, s390's !user_alloc
check, can be simply removed since KVM_SET_MEMORY_REGION ioctl is no
longer supported.
Note: fixed powerpc's indentations with spaces to suppress checkpatch
errors.
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* master: (15791 commits)
Linux 3.9-rc1
btrfs/raid56: Add missing #include <linux/vmalloc.h>
fix compat_sys_rt_sigprocmask()
SUNRPC: One line comment fix
ext4: enable quotas before orphan cleanup
ext4: don't allow quota mount options when quota feature enabled
ext4: fix a warning from sparse check for ext4_dir_llseek
ext4: convert number of blocks to clusters properly
ext4: fix possible memory leak in ext4_remount()
jbd2: fix ERR_PTR dereference in jbd2__journal_start
metag: Provide dma_get_sgtable()
metag: prom.h: remove declaration of metag_dt_memblock_reserve()
metag: copy devicetree to non-init memory
metag: cleanup metag_ksyms.c includes
metag: move mm/init.c exports out of metag_ksyms.c
metag: move usercopy.c exports out of metag_ksyms.c
metag: move setup.c exports out of metag_ksyms.c
metag: move kick.c exports out of metag_ksyms.c
metag: move traps.c exports out of metag_ksyms.c
metag: move irq enable out of irqflags.h on SMP
...
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Conflicts:
arch/x86/kernel/kvmclock.c
Cleanup: __vmx_complete_interrupts has no use for the vmx structure.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
IDT_VECTORING_INFO_FIELD was already read right after vmexit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
I'm not sure why, but the hlist for each entry iterators were conceived
list_for_each_entry(pos, head, member)
The hlist ones were greedy and wanted an extra parameter:
hlist_for_each_entry(tpos, pos, head, member)
Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.
Besides the semantic patch, there was some manual work required:
- Fix up the actual hlist iterators in linux/list.h
- Fix up the declaration of other iterators based on the hlist ones.
- A very small amount of places were using the 'node' parameter, this
was modified to use 'obj->member' instead.
- Coccinelle didn't handle the hlist_for_each_entry_safe iterator
properly, so those had to be fixed up manually.
The semantic patch which is mostly the work of Peter Senna Tschudin is here:
@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;
type T;
expression a,c,d,e;
identifier b;
statement S;
@@
-T b;
<+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
...+>
[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
No need to re-read what vmx_vcpu_run already picked up for us.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Switching the VMCS obviously invalidates what may have been cached about
the guest segments.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
These exits have no preconditions, and we already process the
corresponding reasons in nested_vmx_exit_handled correctly.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
This avoids basing decisions on uninitialized variables, potentially
leaking kernel data to the L1 guest.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This prevents trapping L2 I/O exits if L1 has neither unconditional nor
bitmap-based exiting enabled. Furthermore, it implements I/O bitmap
handling.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The "x86, AMD: Enable WC+ memory type on family 10 processors" patch
currently in -tip added a workaround for AMD F10h CPUs which #GPs my
guest when booted in kvm. This is because it accesses MSR_AMD64_BU_CFG2
which is not currently ignored by kvm. Do that because this MSR is only
baremetal-relevant anyway. While at it, move the ignored MSRs at the
beginning of kvm_set_msr_common so that we exit then and there.
Acked-by: Gleb Natapov <gleb@redhat.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Andre Przywara <andre@andrep.de>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1361298793-31834-2-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This field was needed to differentiate memory slots created by the new
API, KVM_SET_USER_MEMORY_REGION, from those by the old equivalent,
KVM_SET_MEMORY_REGION, whose support was dropped long before:
commit b74a07beed
KVM: Remove kernel-allocated memory regions
Although we also have private memory slots to which KVM allocates
memory with vm_mmap(), !user_alloc slots in other words, the slot id
should be enough for differentiating them.
Note: corresponding function parameters will be removed later.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Without Posted Interrupt, current code is broken. Just disable by
default until Posted Interrupt is ready.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Use link_shadow_page to link the sp to the spte in __direct_map
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
It is only used in debug code, so drop it
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Currently, kvm zaps the large spte if write-protected is needed, the later
read can fault on that spte. Actually, we can make the large spte readonly
instead of making them not present, the page fault caused by read access can
be avoided
The idea is from Avi:
| As I mentioned before, write-protecting a large spte is a good idea,
| since it moves some work from protect-time to fault-time, so it reduces
| jitter. This removes the need for the return value.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When calculating hw_cr0 teh current code masks bits that should be always
on and re-adds them back immediately after. Cleanup the code by masking
only those bits that should be dropped from hw_cr0. This allow us to
get rid of some defines.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
SMEP is disabled if CPU is in non-paging mode in hardware.
However KVM always uses paging mode to emulate guest non-paging
mode with TDP. To emulate this behavior, SMEP needs to be manually
disabled when guest switches to non-paging mode.
We met an issue that, SMP Linux guest with recent kernel (enable
SMEP support, for example, 3.5.3) would crash with triple fault if
setting unrestricted_guest=0. This is because KVM uses an identity
mapping page table to emulate the non-paging mode, where the page
table is set with USER flag. If SMEP is still enabled in this case,
guest will meet unhandlable page fault and then crash.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This reverts commit bd4c86eaa6.
There is not user for kvm_mmu_isolate_page() any more.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Gust page walker puts only present ptes into ptes[] array. No need to
check it again.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Move base_role.nxe initialisation to where all other roles are initialized.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
spte_is_locklessly_modifiable() checks that both SPTE_HOST_WRITEABLE and
SPTE_MMU_WRITEABLE are present on spte. Make it more explicit.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Virtual interrupt delivery avoids KVM to inject vAPIC interrupts
manually, which is fully taken care of by the hardware. This needs
some special awareness into existing interrupr injection path:
- for pending interrupt, instead of direct injection, we may need
update architecture specific indicators before resuming to guest.
- A pending interrupt, which is masked by ISR, should be also
considered in above update action, since hardware will decide
when to inject it at right time. Current has_interrupt and
get_interrupt only returns a valid vector from injection p.o.v.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
basically to benefit from apicv, we need to enable virtualized x2apic mode.
Currently, we only enable it when guest is really using x2apic.
Also, clear MSR bitmap for corresponding x2apic MSRs when guest enabled x2apic:
0x800 - 0x8ff: no read intercept for apicv register virtualization,
except APIC ID and TMCCT which need software's assistance to
get right value.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
'pushq' doesn't exist on i386. Replace with 'push', which should work
since the operand is a register.
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
