Add a helper to complete an ordered_extent without first doing a lookup.
The tracepoint cannot use the ordered_extent class as we also want to
print the range.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Factor out a helper to queue up an ordered_extent completion in a work
queue. This new helper will later be used complete an ordered_extent
without first doing a lookup.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Factor out a helper from btrfs_mark_ordered_io_finished that does the
actual per-ordered_extent work to check if we want to schedule an I/O
completion. This new helper will later be used complete an
ordered_extent without first doing a lookup.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers are gone now.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To delay splitting ordered_extents to I/O completion time we need to be
able to handle fully completed ordered extents in
btrfs_split_ordered_extent. Besides a bit of accounting this primarily
involved moving over the csums to the split bio for the range that it
covers, which is simple enough because we always have one
btrfs_ordered_sum per bio.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently there is a small race window in btrfs_split_ordered_extent,
where the reduced old extent can be looked up on the per-inode rbtree
or the per-root list while the newly split out one isn't visible yet.
Fix this by open coding btrfs_alloc_ordered_extent in
btrfs_split_ordered_extent, and holding the tree lock and
root->ordered_extent_lock over the entire tree and extent manipulation.
Note that this introduces new lock ordering because previously
ordered_extent_lock was never held over the tree lock.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Split two low-level helpers out of btrfs_alloc_ordered_extent to allocate
and insert the logic extent. The pure alloc helper will be used to
improve btrfs_split_ordered_extent.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Return the ordered_extent split from the passed in one. This will be
needed to be able to store an ordered_extent in the btrfs_bio.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The current code to store the final logical to physical mapping for a
zone append write in the extent tree is rather inefficient. It first has
to split the ordered extent so that there is one ordered extent per bio,
so that it can look up the ordered extent on I/O completion in
btrfs_record_physical_zoned and store the physical LBA returned by the
block driver in the ordered extent.
btrfs_rewrite_logical_zoned then has to do a lookup in the chunk tree to
see what physical address the logical address for this bio / ordered
extent is mapped to, and then rewrite it in the extent tree.
To optimize this process, we can store the physical address assigned in
the chunk tree to the original logical address and a pointer to
btrfs_ordered_sum structure the in the btrfs_bio structure, and then use
this information to rewrite the logical address in the btrfs_ordered_sum
structure directly at I/O completion time in btrfs_record_physical_zoned.
btrfs_rewrite_logical_zoned then simply updates the logical address in
the extent tree and the ordered_extent itself.
The code in btrfs_rewrite_logical_zoned now runs for all data I/O
completions in zoned file systems, which is fine as there is no remapping
to do for non-append writes to conventional zones or for relocation, and
the overhead for quickly breaking out of the loop is very low.
Because zoned file systems now need the ordered_sums structure to
record the actual write location returned by zone append, allocate dummy
structures without the csum array for them when the I/O doesn't use
checksums, and free them when completing the ordered_extent.
Note that the btrfs_bio doesn't grow as the new field are places into
a union that is so far not used for data writes and has plenty of space
left in it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_clone_ordered_extent is very specific to the usage in
btrfs_split_ordered_extent. Now that only a single call to
btrfs_clone_ordered_extent is left, just fold it into
btrfs_split_ordered_extent to make the operation more clear.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_split_ordered_extent is only ever asked to split out the beginning
of an ordered_extent (i.e. post == 0). Change it to only take a len to
split out, and switch it to allocate the new extent for the beginning,
as that helps with callers that want to keep a pointer to the
ordered_extent that it is stealing from.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Move the three checks that are about ordered extent internal sanity
checking into btrfs_split_ordered_extent instead of doing them in the
higher level btrfs_extract_ordered_extent routine.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The ordered_extent flags are declared as unsigned long, so pass them as
such to btrfs_add_ordered_extent.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Boris Burkov <boris@bur.io>
[ hch: split from a larger patch ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, btrfs_add_ordered_extent allocates a new ordered extent, adds
it to the rb_tree, but doesn't return a referenced pointer to the
caller. There are cases where it is useful for the creator of a new
ordered_extent to hang on to such a pointer, so add a new function
btrfs_alloc_ordered_extent which is the same as
btrfs_add_ordered_extent, except it takes an additional reference count
and returns a pointer to the ordered_extent. Implement
btrfs_add_ordered_extent as btrfs_alloc_ordered_extent followed by
dropping the new reference and handling the IS_ERR case.
The type of flags in btrfs_alloc_ordered_extent and
btrfs_add_ordered_extent is changed from unsigned int to unsigned long
so it's unified with the other ordered extent functions.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Given that wait is always set to 1, so remove the argument.
Last use of wait with 0 was in 0c304304fe ("Btrfs: remove
csum_bytes_left").
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=Nqg9
-----END PGP SIGNATURE-----
Merge tag 'for-6.2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This round there are a lot of cleanups and moved code so the diffstat
looks huge, otherwise there are some nice performance improvements and
an update to raid56 reliability.
User visible features:
- raid56 reliability vs performance trade off:
- fix destructive RMW for raid5 data (raid6 still needs work): do
full checksum verification for all data during RMW cycle, this
should prevent rewriting potentially corrupted data without
notice
- stripes are cached in memory which should reduce the performance
impact but still can hurt some workloads
- checksums are verified after repair again
- this is the last option without introducing additional features
(write intent bitmap, journal, another tree), the extra checksum
read/verification was supposed to be avoided by the original
implementation exactly for performance reasons but that caused
all the reliability problems
- discard=async by default for devices that support it
- implement emergency flush reserve to avoid almost all unnecessary
transaction aborts due to ENOSPC in cases where there are too many
delayed refs or delayed allocation
- skip block group synchronization if there's no change in used
bytes, can reduce transaction commit count for some workloads
Performance improvements:
- fiemap and lseek:
- overall speedup due to skipping unnecessary or duplicate
searches (-40% run time)
- cache some data structures and sharedness of extents (-30% run
time)
- send:
- faster backref resolution when finding clones
- cached leaf to root mapping for faster backref walking
- improved clone/sharing detection
- overall run time improvements (-70%)
Core:
- module initialization converted to a table of function pointers run
in a sequence
- preparation for fscrypt, extend passing file names across calls,
dir item can store encryption status
- raid56 updates:
- more accurate error tracking of sectors within stripe
- simplify recovery path and remove dedicated endio worker kthread
- simplify scrub call paths
- refactoring to support the extra data checksum verification
during RMW cycle
- tree block parentness checks consolidated and done at metadata read
time
- improved error handling
- cleanups:
- move a lot of code for better synchronization between kernel and
user space sources, split big files
- enum cleanups
- GFP flag cleanups
- header file cleanups, prototypes, dependencies
- redundant parameter cleanups
- inline extent handling simplifications
- inode parameter conversion
- data structure cleanups, reductions, renames, merges"
* tag 'for-6.2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (249 commits)
btrfs: print transaction aborted messages with an error level
btrfs: sync some cleanups from progs into uapi/btrfs.h
btrfs: do not BUG_ON() on ENOMEM when dropping extent items for a range
btrfs: fix extent map use-after-free when handling missing device in read_one_chunk
btrfs: remove outdated logic from overwrite_item() and add assertion
btrfs: unify overwrite_item() and do_overwrite_item()
btrfs: replace strncpy() with strscpy()
btrfs: fix uninitialized variable in find_first_clear_extent_bit
btrfs: fix uninitialized parent in insert_state
btrfs: add might_sleep() annotations
btrfs: add stack helpers for a few btrfs items
btrfs: add nr_global_roots to the super block definition
btrfs: remove BTRFS_LEAF_DATA_OFFSET
btrfs: add helpers for manipulating leaf items and data
btrfs: add eb to btrfs_node_key_ptr_offset
btrfs: pass the extent buffer for the btrfs_item_nr helpers
btrfs: move the csum helpers into ctree.h
btrfs: move eb offset helpers into extent_io.h
btrfs: move file_extent_item helpers into file-item.h
btrfs: move leaf_data_end into ctree.c
...
The function is for internal interfaces so we should use the
btrfs_inode.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This will make syncing fs.h to user space a little easier if we can pull
the super block specific helpers out of fs.h and put them in super.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into file.h to cut down on code in ctree.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update, reformat or reword function comments. This also removes the kdoc
marker so we don't get reports when the function name is missing.
Changes made:
- remove kdoc markers
- reformat the brief description to be a proper sentence
- reword to imperative voice
- align parameter list
- fix typos
Signed-off-by: David Sterba <dsterba@suse.com>
We have a bunch of printk helpers that are in ctree.h. These have
nothing to do with ctree.c, so move them into their own header.
Subsequent patches will cleanup the printk helpers.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that try_lock_extent() takes a cached_state, plumb the cached_state
through btrfs_try_lock_ordered_range() and then use a cached_state in
btrfs_check_nocow_lock everywhere to avoid extra tree searches on the
extent_io_tree.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With nowait becoming more pervasive throughout our codebase go ahead and
add a cached_state to try_lock_extent(). This allows us to be faster
about clearing the locked area if we have contention, and then gives us
the same optimization for unlock if we are able to lock the range.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
OFFSET_MAX is self-annotated and more readable.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
For IOCB_NOWAIT we're going to want to use try lock on the extent lock,
and simply bail if there's an ordered extent in the range because the
only choice there is to wait for the ordered extent to complete.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have two variants of lock/unlock extent, one set that takes a cached
state, another that does not. This is slightly annoying, and generally
speaking there are only a few places where we don't have a cached state.
Simplify this by making lock_extent/unlock_extent the only variant and
make it take a cached state, then convert all the callers appropriately.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This wait event is very similar to the pending ordered wait event in the
sense that it occurs in a different context than the condition signaling
for the event. The signaling occurs in btrfs_remove_ordered_extent()
while the wait event is implemented in btrfs_start_ordered_extent() in
fs/btrfs/ordered-data.c
However, in this case a thread must not acquire the lockdep map for the
ordered extents wait event when the ordered extent is related to a free
space inode. That is because lockdep creates dependencies between locks
acquired both in execution paths related to normal inodes and paths
related to free space inodes, thus leading to false positives.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Ioannis Angelakopoulos <iangelak@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In contrast to the num_writers and num_extwriters wait events, the
condition for the pending ordered wait event is signaled in a different
context from the wait event itself. The condition signaling occurs in
btrfs_remove_ordered_extent() in fs/btrfs/ordered-data.c while the wait
event is implemented in btrfs_commit_transaction() in
fs/btrfs/transaction.c
Thus the thread signaling the condition has to acquire the lockdep map
as a reader at the start of btrfs_remove_ordered_extent() and release it
after it has signaled the condition. In this case some dependencies
might be left out due to the placement of the annotation, but it is
better than no annotation at all.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Ioannis Angelakopoulos <iangelak@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
finish_func is always set to finish_ordered_fn, so remove it and also
the now pointless and somewhat confusingly named
__endio_write_update_ordered wrapper.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
When debugging a reference counting issue with ordered extents, I've found
we're lacking a lot of tracepoint coverage in the ordered extent code.
Close these gaps by adding tracepoints after every refcount_inc() in the
ordered extent code.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The implementation resembles direct I/O: we have to flush any ordered
extents, invalidate the page cache, and do the io tree/delalloc/extent
map/ordered extent dance. From there, we can reuse the compression code
with a minor modification to distinguish the write from writeback. This
also creates inline extents when possible.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, we only create ordered extents when ram_bytes == num_bytes
and offset == 0. However, BTRFS_IOC_ENCODED_WRITE writes may create
extents which only refer to a subset of the full unencoded extent, so we
need to plumb these fields through the ordered extent infrastructure and
pass them down to insert_reserved_file_extent().
Since we're changing the btrfs_add_ordered_extent* signature, let's get
rid of the trivial wrappers and add a kernel-doc.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_add_ordered_extent_*() add num_bytes to fs_info->ordered_bytes.
Then, splitting an ordered extent will call btrfs_add_ordered_extent_*()
again for split extents, leading to double counting of the region of
a split extent. These leaked bytes are finally reported at unmount time
as follow:
BTRFS info (device dm-1): at unmount dio bytes count 364544
Fix the double counting by subtracting split extent's size from
fs_info->ordered_bytes.
Fixes: d22002fd37 ("btrfs: zoned: split ordered extent when bio is sent")
CC: stable@vger.kernel.org # 5.12+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In commit e65f152e43 ("btrfs: refactor how we finish ordered extent io
for endio functions") there was last caller not using 1 for the uptodate
parameter. Now there's only one, passing 1, so we can remove it and
simplify the code.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Store the block device instead of the gendisk in the btrfs_ordered_extent
structure instead of acquiring a reference to it later.
Note: this is from series removing bdgrab/bdput, btrfs is one of the
last users.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This involves the following modification:
- Ordered extent creation
This is done in process_one_page(), now PAGE_SET_ORDERED will call
subpage helper to do the work.
- endio functions
This is done in btrfs_mark_ordered_io_finished().
- btrfs_invalidatepage()
- btrfs_cleanup_ordered_extents()
Use the subpage page helper, and add an extra branch to exit if the
locked page have covered the full range.
Now the usage of page Ordered flag for ordered extent accounting is fully
subpage compatible.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Inside btrfs we use Private2 page status to indicate we have an ordered
extent with pending IO for the sector.
But the page status name, Private2, tells us nothing about the bit
itself, so this patch will rename it to Ordered.
And with extra comment about the bit added, so reader who is still
uncertain about the page Ordered status, will find the comment pretty
easily.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Although we already have btrfs_lookup_first_ordered_extent() and
btrfs_lookup_ordered_extent(), they all have their own limitations:
- btrfs_lookup_ordered_extent() can't do extra range check
It's only designed to lookup any ordered extent before certain bytenr.
- btrfs_lookup_first_ordered_extent() may not return the first ordered
extent in the range
It doesn't ensure the first ordered extent is returned.
The existing callers are only interested in exhausting all ordered
extents in a range, the order is not important.
For incoming btrfs_invalidatepage() refactoring, we need a way to
properly iterate all ordered extents in their bytenr order of a range.
So this patch will introduce a new function,
btrfs_lookup_first_ordered_range(), to do ordered extent with bytenr
order awareness and extra range check.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs has two endio functions to mark certain io range finished for
ordered extents:
- __endio_write_update_ordered()
This is for direct IO
- btrfs_writepage_endio_finish_ordered()
This for buffered IO.
However they go different routines to handle ordered extent io:
- Whether to iterate through all ordered extents
__endio_write_update_ordered() will but
btrfs_writepage_endio_finish_ordered() will not.
In fact, iterating through all ordered extents will benefit later
subpage support, while for current PAGE_SIZE == sectorsize requirement
this behavior makes no difference.
- Whether to update page Private2 flag
__endio_write_update_ordered() will not update page Private2 flag as
for iomap direct IO, the page can not be even mapped.
While btrfs_writepage_endio_finish_ordered() will clear Private2 to
prevent double accounting against btrfs_invalidatepage().
Those differences are pretty subtle, and the ordered extent iterations
code in callers makes code much harder to read.
So this patch will introduce a new function,
btrfs_mark_ordered_io_finished(), to do the heavy lifting:
- Iterate through all ordered extents in the range
- Do the ordered extent accounting
- Queue the work for finished ordered extent
This function has two new feature:
- Proper underflow detection and recovery
The old underflow detection will only detect the problem, then
continue.
No proper info like root/inode/ordered extent info, nor noisy enough
to be caught by fstests.
Furthermore when underflow happens, the ordered extent will never
finish.
New error detection will reset the bytes_left to 0, do proper
kernel warning, and output extra info including root, ino, ordered
extent range, the underflow value.
- Prevent double accounting based on Private2 flag
Now if we find a range without Private2 flag, we will skip to next
range.
As that means someone else has already finished the accounting of
ordered extent.
This makes no difference for current code, but will be a critical part
for incoming subpage support, as we can call
btrfs_mark_ordered_io_finished() for multiple sectors if they are
beyond inode size.
Thus such double accounting prevention is a key feature for subpage.
Now both endio functions only need to call that new function.
And since the only caller of btrfs_dec_test_first_ordered_pending() is
removed, also remove btrfs_dec_test_first_ordered_pending() completely.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
On a zoned filesystem, sometimes we need to split an ordered extent into 3
different ordered extents. The original ordered extent is shortened, at
the front and at the rear, and we create two other new ordered extents to
represent the trimmed parts of the original ordered extent.
After adjusting the original ordered extent, we create an ordered extent
to represent the pre-range, and that may fail with ENOMEM for example.
After that we always try to create the ordered extent for the post-range,
and if that happens to succeed we end up returning success to the caller
as we overwrite the 'ret' variable which contained the previous error.
This means we end up with a file range for which there is no ordered
extent, which results in the range never getting a new file extent item
pointing to the new data location. And since the split operation did
not return an error, writeback does not fail and the inode's mapping is
not flagged with an error, resulting in a subsequent fsync not reporting
an error either.
It's possibly very unlikely to have the creation of the post-range ordered
extent succeed after the creation of the pre-range ordered extent failed,
but it's not impossible.
So fix this by making sure we only create the post-range ordered extent
if there was no error creating the ordered extent for the pre-range.
Fixes: d22002fd37 ("btrfs: zoned: split ordered extent when bio is sent")
CC: stable@vger.kernel.org # 5.12+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
No point in duplicating the functionality just use the generic helper
that has the same semantics.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable zone append writing for zoned mode. When using zone append, a
bio is issued to the start of a target zone and the device decides to
place it inside the zone. Upon completion the device reports the actual
written position back to the host.
Three parts are necessary to enable zone append mode. First, modify the
bio to use REQ_OP_ZONE_APPEND in btrfs_submit_bio_hook() and adjust the
bi_sector to point the beginning of the zone.
Second, record the returned physical address (and disk/partno) to the
ordered extent in end_bio_extent_writepage() after the bio has been
completed. We cannot resolve the physical address to the logical address
because we can neither take locks nor allocate a buffer in this end_bio
context. So, we need to record the physical address to resolve it later
in btrfs_finish_ordered_io().
And finally, rewrite the logical addresses of the extent mapping and
checksum data according to the physical address using btrfs_rmap_block.
If the returned address matches the originally allocated address, we can
skip this rewriting process.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A following patch will add another caller of
btrfs_lookup_ordered_extent(), but from a bio's endio context.
btrfs_lookup_ordered_extent() uses spin_lock_irq() which unconditionally
disables interrupts. Change this to spin_lock_irqsave() so interrupts
aren't disabled and re-enabled unconditionally.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For a zone append write, the device decides the location the data is being
written to. Therefore we cannot ensure that two bios are written
consecutively on the device. In order to ensure that an ordered extent
maps to a contiguous region on disk, we need to maintain a "one bio ==
one ordered extent" rule.
Implement splitting of an ordered extent and extent map on bio submission
to adhere to the rule.
extract_ordered_extent() hooks into btrfs_submit_data_bio() and splits the
corresponding ordered extent so that the ordered extent's region fits into
one bio and the corresponding device limits.
Several sanity checks need to be done in extract_ordered_extent() e.g.
- We cannot split once end_bio'd ordered extent because we cannot divide
ordered->bytes_left for the split ones
- We do not expect a compressed ordered extent
- We should not have checksum list because we omit the list splitting.
Since the function is called before btrfs_wq_submit_bio() or
btrfs_csum_one_bio(), this should be always ensured.
We also need to split an extent map by creating a new one. If not,
unpin_extent_cache() complains about the difference between the start of
the extent map and the file's logical offset.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We track dio_bytes because the shrink delalloc code needs to know if we
have more DIO in flight than we have normal buffered IO. The reason for
this is because we can't "flush" DIO, we have to just wait on the
ordered extents to finish.
However this is true of all ordered extents. If we have more ordered
space outstanding than dirty pages we should be waiting on ordered
extents. We already are ok on this front technically, because we always
do a FLUSH_DELALLOC_WAIT loop, but I want to use the ordered counter in
the preemptive flushing code as well, so change this to count all
ordered bytes instead of just DIO ordered bytes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There is a long existing bug in the last parameter of
btrfs_add_ordered_extent(), in commit 771ed689d2 ("Btrfs: Optimize
compressed writeback and reads") back to 2008.
In that ancient commit btrfs_add_ordered_extent() expects the @type
parameter to be one of the following:
- BTRFS_ORDERED_REGULAR
- BTRFS_ORDERED_NOCOW
- BTRFS_ORDERED_PREALLOC
- BTRFS_ORDERED_COMPRESSED
But we pass 0 in cow_file_range(), which means BTRFS_ORDERED_IO_DONE.
Ironically extra check in __btrfs_add_ordered_extent() won't set the bit
if we see (type == IO_DONE || type == IO_COMPLETE), and avoid any
obvious bug.
But this still leads to regular COW ordered extent having no bit to
indicate its type in various trace events, rendering REGULAR bit
useless.
[FIX]
Change the following aspects to avoid such problem:
- Reorder btrfs_ordered_extent::flags
Now the type bits go first (REGULAR/NOCOW/PREALLCO/COMPRESSED), then
DIRECT bit, finally extra status bits like IO_DONE/COMPLETE/IOERR.
- Add extra ASSERT() for btrfs_add_ordered_extent_*()
- Remove @type parameter for btrfs_add_ordered_extent_compress()
As the only valid @type here is BTRFS_ORDERED_COMPRESSED.
- Remove the unnecessary special check for IO_DONE/COMPLETE in
__btrfs_add_ordered_extent()
This is just to make the code work, with extra ASSERT(), there are
limited values can be passed in.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The refactoring involves the following modifications:
- Return bool instead of int
- Parameter update for @cached of btrfs_dec_test_first_ordered_pending()
For btrfs_dec_test_first_ordered_pending(), @cached is only used to
return the finished ordered extent.
Rename it to @finished_ret.
- Comment updates
* Change one stale comment
Which still refers to btrfs_dec_test_ordered_pending(), but the
context is calling btrfs_dec_test_first_ordered_pending().
* Follow the common comment style for both functions
Add more detailed descriptions for parameters and the return value
* Move the reason why test_and_set_bit() is used into the call sites
- Change how the return value is calculated
The most anti-human part of the return value is:
if (...)
ret = 1;
...
return ret == 0;
This means, when we set ret to 1, the function returns 0.
Change the local variable name to @finished, and directly return the
value of it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_lookup_bio_sums() is only called for read bios.
While btrfs_find_ordered_sum() is to search ordered extent sums, which
is only for write path.
This means to read a page we either:
- Submit read bio if it's not uptodate
This means we only need to search csum tree for checksums.
- The page is already uptodate
It can be marked uptodate for previous read, or being marked dirty.
As we always mark page uptodate for dirty page.
In that case, we don't need to submit read bio at all, thus no need
to search any checksums.
Remove the btrfs_find_ordered_sum() call in btrfs_lookup_bio_sums().
And since btrfs_lookup_bio_sums() is the only caller for
btrfs_find_ordered_sum(), also remove the implementation.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The fs_info value is 32bit, switch also the local u16 variables. This
leads to a better assembly code generated due to movzwl.
This simple change will shave some bytes on x86_64 and release config:
text data bss dec hex filename
1090000 17980 14912 1122892 11224c pre/btrfs.ko
1089794 17980 14912 1122686 11217e post/btrfs.ko
DELTA: -206
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
