Commit Graph

865 Commits

Author SHA1 Message Date
Masahiro Yamada
c71bb9f866 kconfig: remove stale lxdialog/.gitignore
When this .gitignore was added, lxdialog was an independent hostprogs-y.

Now that all objects in lxdialog/ are directly linked to mconf, the
lxdialog is no longer generated.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17 15:47:02 +09:00
Linus Torvalds
5453a3df2a Kconfig updates for v5.1
- rename lexer and parse files
 
  - fix 'Save as' menu of xconfig
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJch99yAAoJED2LAQed4NsGSKkP/R8hkZ5c+0eQIR7q//NC96lO
 EvjRdxKiRQMbkXMDtacCCQtp7maNKuzykobV9iVYTtI9qTT4THXFISBU2BOufvNL
 1Efs8TdY25iR9B979OuAPxns9uTnty7AvYsqjNF7oF1LCkCa/llitHXP/jLypv0p
 f3xKkwMf8IV3esFBjaZjYmP6XihAaABGLIVbtxjqLhHe8ypFSryxCtF1IbwrRrW8
 vfIpatkTQHPMm93Lf9Wjl/z6dYDCQIuiOKkVd+XJBGYOlLm6xk5IOx22xRo8oWU6
 WpKEqTszOeDt3w0bQAZm7L7ewBun39Z5kU4avznDlzNIxJlaUh3rKK61dGfi2K2q
 vO8HhdmW/gbP1NMJSS69lQ9u2hZcfjwZktW5O81ir8fx21WHunoTMOIyIKVnqmio
 5LxhkmdjjWYAaNkjs1Jqi98xXpwxDnnu969z15KHu2aO2USva19jgGJS6gY9z8BW
 Y+InxIhFA44oRSg7GDHes9laJ2s4TlnKQteumSrA0wGL/1mj5bnZsOy1qMWOkyCz
 DNqAyDGJZ/rKGwDYNlaOjYwPZScK91CDvi8pZtDFvS+haqRiYjA1xE0lcaFy0Qz+
 OUHj8FqPH23TPA8nOQ6nGWlapjfNKYlSPuPVA01p2DT8NLuJsLpRE/1SudSMx0Hc
 0duxKFbQt8Cvv1c/G2/q
 =m2QA
 -----END PGP SIGNATURE-----

Merge tag 'kconfig-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kconfig updates from Masahiro Yamada:

 - rename lexer and parse files

 - fix 'Save as' menu of xconfig

* tag 'kconfig-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: fix 'Save As' menu of xconfig
  kconfig: rename zconf.y to parser.y
  kconfig: rename zconf.l to lexer.l
2019-03-13 10:06:28 -07:00
Masahiro Yamada
8741908b3e kconfig: fix 'Save As' menu of xconfig
The 'Save As' menu of xconfig is not working; it always saves the
kernel configuration into the default file irrespective of the file
chosen in the dialog box.

The 'Save' menu always writes into the default file, but it would
make more sense to write into the file previously chosen by 'Load'
or 'Save As'.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-12 02:50:24 +09:00
Masahiro Yamada
058507195b kbuild: move ".config not found!" message from Kconfig to Makefile
If you run "make" in a pristine source tree, currently Kbuild will
start to build Kconfig to let it show the error message.

It would be more straightforward to check it in Makefile and let
it fail immediately.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-27 22:25:10 +09:00
Masahiro Yamada
769a1c0226 kconfig: rename zconf.y to parser.y
Use a more logical name.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-13 23:25:58 +09:00
Masahiro Yamada
981e545a69 kconfig: rename zconf.l to lexer.l
Use a more logical name.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-13 23:25:49 +09:00
Masahiro Yamada
2648ca1859 kconfig: clean generated *conf-cfg files
I accidentally dropped '*' in the previous renaming patch.

Revive it so that 'make mrproper' can clean the generated files.

Fixes: d86271af64 ("kconfig: rename generated .*conf-cfg to *conf-cfg")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-14 10:37:09 +09:00
Masahiro Yamada
d86271af64 kconfig: rename generated .*conf-cfg to *conf-cfg
Remove the dot-prefixing since it is just a matter of the
.gitignore file.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06 10:47:09 +09:00
Masahiro Yamada
ba97df4558 kbuild: use assignment instead of define ... endef for filechk_* rules
You do not have to use define ... endef for filechk_* rules.

For simple cases, the use of assignment looks cleaner, IMHO.

I updated the usage for scripts/Kbuild.include in case somebody
misunderstands the 'define ... endif' is the requirement.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-01-06 10:22:35 +09:00
Masahiro Yamada
a5003571e6 kconfig: remove unused "file" field of yylval union
This has never been used.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06 09:46:51 +09:00
Masahiro Yamada
f222b7f436 kconfig: surround dbg_sym_flags with #ifdef DEBUG to fix gconf warning
Fix the following warning:

  no previous prototype for ‘dbg_sym_flags’ [-Wmissing-prototypes]

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-28 22:22:39 +09:00
Masahiro Yamada
3b54197856 kconfig: split images.c out of qconf.cc/gconf.c to fix gconf warnings
Currently, images.c is included by qconf.cc and gconf.c.
qconf.cc uses all of xpm_* arrays, but gconf.c only some of them.
Hence, lots of "... defined but not used" warnings are displayed
while compiling gconf.c

Splitting out images.c fixes the warnings.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-28 22:22:39 +09:00
Masahiro Yamada
9abe42371b kconfig: add static qualifiers to fix gconf warnings
Add "static" to functions that are locally used in gconf.c
This fixes some "no previous prototype for ..." warnings.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-28 22:22:39 +09:00
Masahiro Yamada
cbafbf7f55 kconfig: split the lexer out of zconf.y
Compile zconf.lex.c independently of the other files.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-28 22:22:38 +09:00
Masahiro Yamada
558e78e3ce kconfig: split some C files out of zconf.y
I want to compile each C file independently instead of including all
of them from zconf.y.

Split out confdata.c, expr.c, symbol.c, and preprocess.c .
These are low-hanging fruits.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-28 22:22:38 +09:00
Masahiro Yamada
0c87410010 kconfig: convert to SPDX License Identifier
All files in lxdialog/ are licensed under GPL-2.0+, and the rest are
under GPL-2.0. I added GPL-2.0 tags to test scripts in tests/.

Documentation/process/license-rules.rst does not suggest anything
about the flex/bison files. Because flex does not accept the C++
comment style at the very top of a file, I used the C style for
zconf.l, and so for zconf.y for consistency.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-28 22:22:28 +09:00
Masahiro Yamada
979f2b2f79 kconfig: remove keyword lookup table entirely
Commit 7a88488bbc ("[PATCH] kconfig: use gperf for kconfig keywords")
introduced gperf for the keyword lookup.

Then, commit bb3290d916 ("Remove gperf usage from toolchain") killed
the gperf use. As a result, the linear keyword search was left behind.

If we do not use gperf, there is no reason to have the separate table
of the keywords. Move all keywords back to the lexer.

I also refactored the lexer to remove the COMMAND and PARAM states.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-28 20:44:38 +09:00
Masahiro Yamada
4b31a32caf kconfig: update current_pos in the second lexer
To simplify the generated lexer, let the hand-made lexer update the
file name and line number for the parser.

I tested this with DEBUG_PARSE, and confirmed the same file names
and line numbers were dumped.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-22 00:25:56 +09:00
Masahiro Yamada
824fa3b3b5 kconfig: switch to ASSIGN_VAL state in the second lexer
To simplify the generated lexer, switch to the ASSIGN_VAL state in
the hand-made lexer.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-22 00:25:55 +09:00
Masahiro Yamada
b3d1d9d3c3 kconfig: stop associating kconf_id with yylval
The lexer has conventionally associated kconf_id data with yylval
to carry additional information to the parser.

No token is relying on this any more.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-22 00:25:55 +09:00
Masahiro Yamada
caaebb3c6d kconfig: refactor end token rules
T_ENDMENU, T_ENDCHOICE, T_ENDIF are the last users of kconf_id
associated with yylval. Refactor them to not use it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-22 00:25:54 +09:00
Masahiro Yamada
f5451582c4 kconfig: stop supporting '.' and '/' in unquoted words
In my understanding, special characters such as '.' and '/' are
supported in unquoted words to use bare file paths in the "source"
statement.

With the previous commit surrounding all file paths with double
quotes, we can drop this.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-22 00:25:54 +09:00
Masahiro Yamada
171a515d08 kconfig: use T_WORD instead of T_VARIABLE for variables
There is no grammatical ambiguity by using T_WORD for variables.
The parser can distinguish variables from symbols from the context.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-22 00:25:53 +09:00
Masahiro Yamada
c3d228713b kconfig: use specific tokens instead of T_ASSIGN for assignments
Currently, the lexer returns T_ASSIGN for all of =, :=, and +=
associating yylval with the flavor.

I want to make the generated lexer as simple as possible. So, the
lexer should convert keywords to tokens without thinking about the
meaning.

   =  ->  T_EQUAL
  :=  ->  T_COLON_EQUAL
  +=  ->  T_PLUS_EQUAL

Unfortunately, Kconfig uses = instead of == for the equal operator.
So, the same token T_EQUAL is used for assignment and comparison.
The parser can still distinguish them from the context.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-22 00:25:52 +09:00
Masahiro Yamada
ce2164ab58 kconfig: refactor scanning and parsing "option" properties
For the keywords "modules", "defconfig_list", and "allnoconfig_y",
the lexer should pass specific tokens instead of generic T_WORD.

This simplifies both the lexer and the parser.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-22 00:25:52 +09:00
Masahiro Yamada
3c8f317d4c kconfig: use distinct tokens for type and default properties
This commit removes kconf_id::stype to prepare for the entire
removal of kconf_id.c

To simplify the lexer, I want keywords straight-mapped to tokens.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-22 00:25:34 +09:00
Masahiro Yamada
a01e5d242d kconfig: remove redundant token defines
These are already defined as %left.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-15 17:45:22 +09:00
Masahiro Yamada
4b5ec81bfe kconfig: rename depends_list to comment_option_list
Now the comment_stmt is the only user of depends_list. Rename it to
comment_option_list

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-15 17:45:22 +09:00
Masahiro Yamada
1f31be9ec0 kconfig: loosen the order of "visible" and "depends on" in menu entry
Currently, "visible" and "depends on", if defined in a menu entry,
must appear in that order.

The real example is in drivers/media/tuners/Kconfig:

  menu "Customize TV tuners"
          visible if <expr1>
          depends on <expr2>

... is fine, but you cannot change the property order like this:

  menu "Customize TV tuners"
          depends on <expr2>
          visible if <expr1>

Kconfig does not require a specific order of properties. In this case,
menu_add_visibility(() and menu_add_dep() are orthogonal.

Loosen this unreasonable restriction.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-15 17:45:21 +09:00
Masahiro Yamada
94d4e1b602 kconfig: remove redundant menu_block rule
The code block surrounded by "menu" ... "endmenu" is stmt_list.

Remove the redundant menu_block symbol entirely.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-15 17:45:21 +09:00
Masahiro Yamada
4891796c6f kconfig: remove redundant if_block rule
The code block surrounded by "if" ... "endif" is stmt_list.

Remove the redundant if_block symbol entirely.

Remove "stmt_list: stmt_list end" rule as well since it would
obviously cause conflicts.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-15 17:45:21 +09:00
Masahiro Yamada
2f60e46e60 kconfig: remove grammatically ambiguous option_error
This commit decreases 6 shift/reduce conflicts, and finally achieves
conflict-free parser.

Since Kconfig has no terminator for a config block, detecting the end
of config_stmt is not easy.

For example, there are two ways for handling the error in the following
code:

  1 config FOO
  2         =

 [A] Print "unknown option" error, assuming the line 2 is a part of
     config_option_list

 [B] Print "invalid statement", assuming the line 1 is reduced into
     a config_stmt by itself

Bison actually chooses [A] because it performs the shift rather than
the reduction where both are possible.

However, there is no reason to choose one over the other.

Let's remove the option_error, and let it fall back to [B].

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-15 17:45:20 +09:00
Masahiro Yamada
6900ae9eee kconfig: remove grammatically ambiguous "unexpected option" diagnostic
This commit decreases 15 shift/reduce conflicts.

The location of this error recovery is ambiguous.

For example, there are two ways to interpret the following code:

  1 config FOO
  2         bool "foo"

 [A] Both lines are reduced together into a config_stmt.

 [B] The only line 1 is reduced into a config_stmt, and the line 2
     matches to "option_name error T_EOL"

Of course, we expect [A], but [B] could be grammatically possible.

Kconfig has no terminator for a config block. So, we cannot detect its
end until we see a non-property keyword. People often insert a blank
line between two config blocks, but it is just a coding convention.
Blank lines are actually allowed anywhere in Kconfig files.

The real error is when a property keyword appears right after "endif",
"endchoice", "endmenu",  "source", "comment", or variable assignment.

Instead of fixing the grammatical ambiguity, I chose to simply remove
this error recovery.

The difference is

  unexpected option "bool"

... is turned into a more generic message:

  invalid statement

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-15 17:45:20 +09:00
Masahiro Yamada
723679339d kconfig: warn no new line at end of file
It would be nice to warn if a new line is missing at end of file.

We could do this by checkpatch.pl for arbitrary files, but new line
is rather essential as a statement terminator in Kconfig.

The warning message looks like this:

  kernel/Kconfig.preempt:60:warning: no new line at end of file

Currently, kernel/Kconfig.preempt is the only file with no new line
at end of file. Fix it.

I know there are some false negative cases. For example, no warning
is displayed when the last line contains some whitespaces/comments,
but no new line. Yet, this commit works well for most cases.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-15 17:44:35 +09:00
Masahiro Yamada
0bcc547ec4 kconfig: clean up EOF handling in the lexer
A new file should always start in the INITIAL state.

When the lexer bumps into EOF, the lexer must get back to the INITIAL
state anyway. Remove the redundant <<EOF>> pattern in the PARAM state.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-13 00:20:09 +09:00
Masahiro Yamada
cc66bca775 kconfig: fix ambiguous grammar in terms of new lines
This commit decreases 8 shift/reduce conflicts.

A certain amount of grammatical ambiguity comes from how to reduce
excessive T_EOL tokens.

Let's take a look at the example code below:

  1  config A
  2          bool "a"
  3
  4          depends on B
  5
  6  config B
  7          def_bool y

The line 3 is melt into "config_option_list", but the line 5 can be
either a part of "config_option_list" or "common_stmt" by itself.

Currently, the lexer converts '\n' to T_EOL verbatim. In Kconfig,
a new line works as a statement terminator, but new lines in empty
lines are not critical since empty lines (or lines that contain only
whitespaces/comments) are just no-op.

If the lexer simply discards no-op lines, the parser will not be
bothered by excessive T_EOL tokens.

Of course, this means we are shifting the complexity from the parser
to the lexer, but it is much easier than tackling on shift/reduce
conflicts.

I introduced the second stage lexer to tweak the behavior.

Discard T_EOL if the previous token is T_EOL or T_HELPTEXT.
Two T_EOL tokens in a row is meaningless. T_HELPTEXT is a special
token that is reduced without T_EOL.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-13 00:18:54 +09:00
Masahiro Yamada
21c5ecf604 kconfig: refactor pattern matching in STRING state
Here, similar matching patters are duplicated in order to look ahead
the '\n' character. If the next character is '\n', the lexer returns
T_WORD_QUOTE because it must be prepared to return T_EOL at the next
match.

Use unput('\n') trick to reduce the code duplication.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-13 00:16:24 +09:00
Masahiro Yamada
be3c807597 kconfig: remove unneeded pattern matching to whitespaces
Whitespaces are consumed in the COMMAND state anyway.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-13 00:16:23 +09:00
Masahiro Yamada
413cd19d81 kconfig: require T_EOL to reduce visible statement
All line-oriented statements should be reduced when seeing a T_EOL
token. I guess missing T_EOL for the "visible" statement is just a
mistake. This commit decreases one shift/reduce conflict.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-13 00:16:22 +09:00
Masahiro Yamada
fbac5977d8 kconfig: fix memory leak when EOF is encountered in quotation
An unterminated string literal followed by new line is passed to the
parser (with "multi-line strings not supported" warning shown), then
handled properly there.

On the other hand, an unterminated string literal at end of file is
never passed to the parser, then results in memory leak.

[Test Code]

  ----------(Kconfig begin)----------
  source "Kconfig.inc"

  config A
          bool "a"
  -----------(Kconfig end)-----------

  --------(Kconfig.inc begin)--------
  config B
          bool "b\No new line at end of file
  ---------(Kconfig.inc end)---------

[Summary from Valgrind]

  Before the fix:

    LEAK SUMMARY:
       definitely lost: 16 bytes in 1 blocks
       ...

  After the fix:

    LEAK SUMMARY:
       definitely lost: 0 bytes in 0 blocks
       ...

Eliminate the memory leak path by handling this case. Of course, such
a Kconfig file is wrong already, so I will add an error message later.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-13 00:16:21 +09:00
Masahiro Yamada
77c1c0fa8b kconfig: fix file name and line number of warn_ignored_character()
Currently, warn_ignore_character() displays invalid file name and
line number.

The lexer should use current_file->name and yylineno, while the parser
should use zconf_curname() and zconf_lineno().

This difference comes from that the lexer is always going ahead
of the parser. The parser needs to look ahead one token to make a
shift/reduce decision, so the lexer is requested to scan more text
from the input file.

This commit fixes the warning message from warn_ignored_character().

[Test Code]

  ----(Kconfig begin)----
  /
  -----(Kconfig end)-----

[Output]

  Before the fix:

  <none>:0:warning: ignoring unsupported character '/'

  After the fix:

  Kconfig:1:warning: ignoring unsupported character '/'

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-13 00:16:20 +09:00
Masahiro Yamada
0cbe3ac439 kconfig: remove k_invalid from expr_parse_string() return type
The only possibility of k_invalid being returned was when
expr_parse_sting() parsed S_OTHER type symbol. This actually never
happened, and this is even clearer since S_OTHER has gone.

Clean up unreachable code.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-08 10:42:42 +09:00
Masahiro Yamada
2aabbed677 kconfig: remove S_OTHER symbol type and correct dependency tracking
The S_OTHER type could be set only when conf_read_simple() is reading
include/config/auto.conf file.

For example, CONFIG_FOO=y exists in include/config/auto.conf but it is
missing from the currently parsed Kconfig files, sym_lookup() allocates
a new symbol, and sets its type to S_OTHER.

Strangely, it will be set to S_STRING by conf_set_sym_val() a few lines
below while it is obviously bool or tristate type. On the other hand,
when CONFIG_BAR="bar" is being dropped from include/config/auto.conf,
its type remains S_OTHER. Because for_all_symbols() omits S_OTHER
symbols, conf_touch_deps() misses to touch include/config/bar.h

This behavior has been a pretty mystery for me, and digging the git
histroy did not help. At least, touching depfiles is broken for string
type symbols.

I removed S_OTHER entirely, and reimplemented it more simply.

If CONFIG_FOO was visible in the previous syncconfig, but is missing
now, what we want to do is quite simple; just call conf_touch_dep()
to touch include/config/foo.h instead of allocating a new symbol data.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-08 10:42:41 +09:00
Masahiro Yamada
1508fec82e kconfig: split out code touching a file to conf_touch_dep()
conf_touch_deps() iterates over symbols, touching corresponding
include/config/*.h files as needed.

Split the part that touches a single file into a new helper so it can
be reused.

The new helper, conf_touch_dep(), takes a symbol name as a parameter,
and touches the corresponding include/config/*.h file.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-08 10:42:30 +09:00
Masahiro Yamada
0849d212e3 kconfig: rename conf_split_config() to conf_touch_deps()
According to commit 2e3646e51b ("kconfig: integrate split config
into silentoldconfig"), this function was named after split-include
tool, which used to exist in old versions of Linux.

Setting aside the historical reason, rename it into a more intuitive
name. This function touches timestamp files under include/config/
in order to interact with the fixdep tool.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-08 10:40:52 +09:00
Masahiro Yamada
75889e9be7 kconfig: remove unneeded setsym label in conf_read_simple()
The two 'goto setsym' statements are reachable only when sym == NULL.

The code below the 'setsym:' label does nothing when sym == NULL
since there is just one if-block guarded by 'if (sym && ...)'.

Hence, 'goto setsym' can be replaced with 'continue'.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-08 10:40:52 +09:00
Anders Roxell
a9b7228478 scripts/kconfig/merge_config: don't redefine 'y' to 'm'
In today's merge_config.sh the order of the config fragment files dictates
the output of a config option. With this approach we will get different
.config files depending on the order of the config fragment files.

So doing something like:
$ ./merge/kconfig/merge_config.sh selftest.config drm.config

Where selftest.config defines DRM=y and drm.config defines DRM=m, the
result will be "DRM=m".

Rework to add a switch to get builtin '=y' precedence over modules '=m',
this will result in "DRM=y". If we do something like this:

$ ./merge/kconfig/merge_config.sh -y selftest.config drm.config

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-15 23:49:35 +09:00
Masahiro Yamada
6bbe4385d0 kconfig: merge_config: avoid false positive matches from comment lines
The current SED_CONFIG_EXP could match to comment lines in config
fragment files, especially when CONFIG_PREFIX_ is empty. For example,
Buildroot uses empty prefixing; starting symbols with BR2_ is just
convention.

Make the sed expression more robust against false positives from
comment lines. The new sed expression matches to only valid patterns.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2018-11-11 23:04:51 +09:00
Petr Vorel
2cd3faf87d merge_config.sh: Allow to define config prefix
with CONFIG_ environment variable.

merge_config.sh uses CONFIG_ which is used in kernel and other projects.
There are some projects which use kconfig with different prefixes (e.g.
buildroot: BR2_ prefix). CONFIG_ variable is already used for this
purpose in kconfig binary (scripts/kconfig/lkc.h), let's use the same
rule for in merge_config.sh.

Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-02 00:15:26 +09:00
Masahiro Yamada
0085b4191f kconfig: remove silentoldconfig target
As commit 911a91c39c ("kconfig: rename silentoldconfig to
syncconfig") announced, it is time for the removal.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-02 00:15:25 +09:00