Correct the DSCR SPR becoming temporarily corrupted if a task is
context switched during a transaction.
The problem occurs while suspending the task and is caused by saving
the DSCR to thread.dscr after it has already been set to the CPU's
default value:
__switch_to() calls __switch_to_tm()
which calls tm_reclaim_task()
which calls tm_reclaim_thread()
which calls tm_reclaim()
where the DSCR is set to the CPU's default
__switch_to() calls _switch()
where thread.dscr is set to the DSCR
When the task is resumed, it's transaction will be doomed (as usual)
and the DSCR SPR will be corrupted, although the checkpointed value
will be correct. Therefore the DSCR will be immediately corrected by
the transaction aborting, unless it has been suspended. In that case
the incorrect value can be seen by the task until it resumes the
transaction.
The fix is to treat the DSCR similarly to the TAR and save it early
in __switch_to().
A program exposing the problem is added to the kernel self tests as:
tools/testing/selftests/powerpc/tm/tm-resched-dscr.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
CC: <stable@vger.kernel.org> [v3.10+]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Pull powerpc updates from Ben Herrenschmidt:
"Here is the bulk of the powerpc changes for this merge window. It got
a bit delayed in part because I wasn't paying attention, and in part
because I discovered I had a core PCI change without a PCI maintainer
ack in it. Bjorn eventually agreed it was ok to merge it though we'll
probably improve it later and I didn't want to rebase to add his ack.
There is going to be a bit more next week, essentially fixes that I
still want to sort through and test.
The biggest item this time is the support to build the ppc64 LE kernel
with our new v2 ABI. We previously supported v2 userspace but the
kernel itself was a tougher nut to crack. This is now sorted mostly
thanks to Anton and Rusty.
We also have a fairly big series from Cedric that add support for
64-bit LE zImage boot wrapper. This was made harder by the fact that
traditionally our zImage wrapper was always 32-bit, but our new LE
toolchains don't really support 32-bit anymore (it's somewhat there
but not really "supported") so we didn't want to rely on it. This
meant more churn that just endian fixes.
This brings some more LE bits as well, such as the ability to run in
LE mode without a hypervisor (ie. under OPAL firmware) by doing the
right OPAL call to reinitialize the CPU to take HV interrupts in the
right mode and the usual pile of endian fixes.
There's another series from Gavin adding EEH improvements (one day we
*will* have a release with less than 20 EEH patches, I promise!).
Another highlight is the support for the "Split core" functionality on
P8 by Michael. This allows a P8 core to be split into "sub cores" of
4 threads which allows the subcores to run different guests under KVM
(the HW still doesn't support a partition per thread).
And then the usual misc bits and fixes ..."
[ Further delayed by gmail deciding that BenH is a dirty spammer.
Google knows. ]
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (155 commits)
powerpc/powernv: Add missing include to LPC code
selftests/powerpc: Test the THP bug we fixed in the previous commit
powerpc/mm: Check paca psize is up to date for huge mappings
powerpc/powernv: Pass buffer size to OPAL validate flash call
powerpc/pseries: hcall functions are exported to modules, need _GLOBAL_TOC()
powerpc: Exported functions __clear_user and copy_page use r2 so need _GLOBAL_TOC()
powerpc/powernv: Set memory_block_size_bytes to 256MB
powerpc: Allow ppc_md platform hook to override memory_block_size_bytes
powerpc/powernv: Fix endian issues in memory error handling code
powerpc/eeh: Skip eeh sysfs when eeh is disabled
powerpc: 64bit sendfile is capped at 2GB
powerpc/powernv: Provide debugfs access to the LPC bus via OPAL
powerpc/serial: Use saner flags when creating legacy ports
powerpc: Add cpu family documentation
powerpc/xmon: Fix up xmon format strings
powerpc/powernv: Add calls to support little endian host
powerpc: Document sysfs DSCR interface
powerpc: Fix regression of per-CPU DSCR setting
powerpc: Split __SYSFS_SPRSETUP macro
arch: powerpc/fadump: Cleaning up inconsistent NULL checks
...
Now that 3.15 is released, this merges the 'next' branch into 'master',
bringing us to the normal situation where my 'master' branch is the
merge window.
* accumulated work in next: (6809 commits)
ufs: sb mutex merge + mutex_destroy
powerpc: update comments for generic idle conversion
cris: update comments for generic idle conversion
idle: remove cpu_idle() forward declarations
nbd: zero from and len fields in NBD_CMD_DISCONNECT.
mm: convert some level-less printks to pr_*
MAINTAINERS: adi-buildroot-devel is moderated
MAINTAINERS: add linux-api for review of API/ABI changes
mm/kmemleak-test.c: use pr_fmt for logging
fs/dlm/debug_fs.c: replace seq_printf by seq_puts
fs/dlm/lockspace.c: convert simple_str to kstr
fs/dlm/config.c: convert simple_str to kstr
mm: mark remap_file_pages() syscall as deprecated
mm: memcontrol: remove unnecessary memcg argument from soft limit functions
mm: memcontrol: clean up memcg zoneinfo lookup
mm/memblock.c: call kmemleak directly from memblock_(alloc|free)
mm/mempool.c: update the kmemleak stack trace for mempool allocations
lib/radix-tree.c: update the kmemleak stack trace for radix tree allocations
mm: introduce kmemleak_update_trace()
mm/kmemleak.c: use %u to print ->checksum
...
This adds several behavioral tests to sysctl string and number writing
to detect unexpected cases that behaved differently when the sysctl
kernel.sysctl_writes_strict != 1.
[ original ]
root@localhost:~# make test_num
== Testing sysctl behavior against /proc/sys/kernel/domainname ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... FAIL
Writing beyond end of sysctl ... FAIL
Writing sysctl with multiple long writes ... FAIL
Writing entire sysctl in short writes ... FAIL
Writing middle of sysctl after unsynchronized seek ... ok
Checking sysctl maxlen is at least 65 ... ok
Checking sysctl keeps original string on overflow append ... FAIL
Checking sysctl stays NULL terminated on write ... ok
Checking sysctl stays NULL terminated on overwrite ... ok
make: *** [test_num] Error 1
root@localhost:~# make test_string
== Testing sysctl behavior against /proc/sys/vm/swappiness ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... FAIL
Writing beyond end of sysctl ... FAIL
Writing sysctl with multiple long writes ... ok
make: *** [test_string] Error 1
[ with CONFIG_PROC_SYSCTL_STRICT_WRITES ]
root@localhost:~# make run_tests
== Testing sysctl behavior against /proc/sys/kernel/domainname ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... ok
Writing beyond end of sysctl ... ok
Writing sysctl with multiple long writes ... ok
Writing entire sysctl in short writes ... ok
Writing middle of sysctl after unsynchronized seek ... ok
Checking sysctl maxlen is at least 65 ... ok
Checking sysctl keeps original string on overflow append ... ok
Checking sysctl stays NULL terminated on write ... ok
Checking sysctl stays NULL terminated on overwrite ... ok
== Testing sysctl behavior against /proc/sys/vm/swappiness ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... ok
Writing beyond end of sysctl ... ok
Writing sysctl with multiple long writes ... ok
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Recently added page-cache dumping is known to be a little bit racy.
But after race with truncate it just dies due to unhandled SIGBUS
when it tries to poke pages beyond the new end of file.
This patch adds handler for SIGBUS which skips the rest of the file.
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- ACPICA update to upstream version 20140424. That includes a
number of fixes and improvements related to things like GPE
handling, table loading, headers, memory mapping and unmapping,
DSDT/SSDT overriding, and the Unload() operator. The acpidump
utility from upstream ACPICA is included too. From Bob Moore,
Lv Zheng, David Box, David Binderman, and Colin Ian King.
- Fixes and cleanups related to ACPI video and backlight interfaces
from Hans de Goede. That includes blacklist entries for some new
machines and using native backlight by default.
- ACPI device enumeration changes to create platform devices
rather than PNP devices for ACPI device objects with _HID by
default. PNP devices will still be created for the ACPI device
object with device IDs corresponding to real PNP devices, so
that change should not break things left and right, and we're
expecting to see more and more ACPI-enumerated platform devices
in the future. From Zhang Rui and Rafael J Wysocki.
- Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing
it to handle system suspend/resume on Asus T100 correctly.
From Heikki Krogerus and Rafael J Wysocki.
- PM core update introducing a mechanism to allow runtime-suspended
devices to stay suspended over system suspend/resume transitions
if certain additional conditions related to coordination within
device hierarchy are met. Related PM documentation update and
ACPI PM domain support for the new feature. From Rafael J Wysocki.
- Fixes and improvements related to the "freeze" sleep state. They
affect several places including cpuidle, PM core, ACPI core, and
the ACPI battery driver. From Rafael J Wysocki and Zhang Rui.
- Miscellaneous fixes and updates of the ACPI core from Aaron Lu,
Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki.
- Fixes and cleanups for the ACPI processor and ACPI PAD (Processor
Aggregator Device) drivers from Baoquan He, Manuel Schölling,
Tony Camuso, and Toshi Kani.
- System suspend/resume optimization in the ACPI battery driver from
Lan Tianyu.
- OPP (Operating Performance Points) subsystem updates from
Chander Kashyap, Mark Brown, and Nishanth Menon.
- cpufreq core fixes, updates and cleanups from Srivatsa S Bhat,
Stratos Karafotis, and Viresh Kumar.
- Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q,
s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris,
Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and
Viresh Kumar.
- intel_pstate driver fixes and cleanups from Dirk Brandewie,
Doug Smythies, and Stratos Karafotis.
- Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown.
- Fix for the cpuidle menu governor from Chander Kashyap.
- New ARM clps711x cpuidle driver from Alexander Shiyan.
- Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter,
Fabian Frederick, Pali Rohár, and Sebastian Capella.
- Intel RAPL (Running Average Power Limit) driver updates from
Jacob Pan.
- PNP subsystem updates from Bjorn Helgaas and Fabian Frederick.
- devfreq core updates from Chanwoo Choi and Paul Bolle.
- devfreq updates for exynos4 and exynos5 from Chanwoo Choi and
Bartlomiej Zolnierkiewicz.
- turbostat tool fix from Jean Delvare.
- cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra
and Thomas Renninger.
- New ACPI ec_access.c tool for poking at the EC in a safe way
from Thomas Renninger.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=tpdF
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into next
Pull ACPI and power management updates from Rafael Wysocki:
"ACPICA is the leader this time (63 commits), followed by cpufreq (28
commits), devfreq (15 commits), system suspend/hibernation (12
commits), ACPI video and ACPI device enumeration (10 commits each).
We have no major new features this time, but there are a few
significant changes of how things work. The most visible one will
probably be that we are now going to create platform devices rather
than PNP devices by default for ACPI device objects with _HID. That
was long overdue and will be really necessary to be able to use the
same drivers for the same hardware blocks on ACPI and DT-based systems
going forward. We're not expecting fallout from this one (as usual),
but it's something to watch nevertheless.
The second change having a chance to be visible is that ACPI video
will now default to using native backlight rather than the ACPI
backlight interface which should generally help systems with broken
Win8 BIOSes. We're hoping that all problems with the native backlight
handling that we had previously have been addressed and we are in a
good enough shape to flip the default, but this change should be easy
enough to revert if need be.
In addition to that, the system suspend core has a new mechanism to
allow runtime-suspended devices to stay suspended throughout system
suspend/resume transitions if some extra conditions are met
(generally, they are related to coordination within device hierarchy).
However, enabling this feature requires cooperation from the bus type
layer and for now it has only been implemented for the ACPI PM domain
(used by ACPI-enumerated platform devices mostly today).
Also, the acpidump utility that was previously shipped as a separate
tool will now be provided by the upstream ACPICA along with the rest
of ACPICA code, which will allow it to be more up to date and better
supported, and we have one new cpuidle driver (ARM clps711x).
The rest is improvements related to certain specific use cases,
cleanups and fixes all over the place.
Specifics:
- ACPICA update to upstream version 20140424. That includes a number
of fixes and improvements related to things like GPE handling,
table loading, headers, memory mapping and unmapping, DSDT/SSDT
overriding, and the Unload() operator. The acpidump utility from
upstream ACPICA is included too. From Bob Moore, Lv Zheng, David
Box, David Binderman, and Colin Ian King.
- Fixes and cleanups related to ACPI video and backlight interfaces
from Hans de Goede. That includes blacklist entries for some new
machines and using native backlight by default.
- ACPI device enumeration changes to create platform devices rather
than PNP devices for ACPI device objects with _HID by default. PNP
devices will still be created for the ACPI device object with
device IDs corresponding to real PNP devices, so that change should
not break things left and right, and we're expecting to see more
and more ACPI-enumerated platform devices in the future. From
Zhang Rui and Rafael J Wysocki.
- Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing it
to handle system suspend/resume on Asus T100 correctly. From
Heikki Krogerus and Rafael J Wysocki.
- PM core update introducing a mechanism to allow runtime-suspended
devices to stay suspended over system suspend/resume transitions if
certain additional conditions related to coordination within device
hierarchy are met. Related PM documentation update and ACPI PM
domain support for the new feature. From Rafael J Wysocki.
- Fixes and improvements related to the "freeze" sleep state. They
affect several places including cpuidle, PM core, ACPI core, and
the ACPI battery driver. From Rafael J Wysocki and Zhang Rui.
- Miscellaneous fixes and updates of the ACPI core from Aaron Lu,
Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki.
- Fixes and cleanups for the ACPI processor and ACPI PAD (Processor
Aggregator Device) drivers from Baoquan He, Manuel Schölling, Tony
Camuso, and Toshi Kani.
- System suspend/resume optimization in the ACPI battery driver from
Lan Tianyu.
- OPP (Operating Performance Points) subsystem updates from Chander
Kashyap, Mark Brown, and Nishanth Menon.
- cpufreq core fixes, updates and cleanups from Srivatsa S Bhat,
Stratos Karafotis, and Viresh Kumar.
- Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q,
s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris,
Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and
Viresh Kumar.
- intel_pstate driver fixes and cleanups from Dirk Brandewie, Doug
Smythies, and Stratos Karafotis.
- Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown.
- Fix for the cpuidle menu governor from Chander Kashyap.
- New ARM clps711x cpuidle driver from Alexander Shiyan.
- Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter,
Fabian Frederick, Pali Rohár, and Sebastian Capella.
- Intel RAPL (Running Average Power Limit) driver updates from Jacob
Pan.
- PNP subsystem updates from Bjorn Helgaas and Fabian Frederick.
- devfreq core updates from Chanwoo Choi and Paul Bolle.
- devfreq updates for exynos4 and exynos5 from Chanwoo Choi and
Bartlomiej Zolnierkiewicz.
- turbostat tool fix from Jean Delvare.
- cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra
and Thomas Renninger.
- New ACPI ec_access.c tool for poking at the EC in a safe way from
Thomas Renninger"
* tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (187 commits)
ACPICA: Namespace: Remove _PRP method support.
intel_pstate: Improve initial busy calculation
intel_pstate: add sample time scaling
intel_pstate: Correct rounding in busy calculation
intel_pstate: Remove C0 tracking
PM / hibernate: fixed typo in comment
ACPI: Fix x86 regression related to early mapping size limitation
ACPICA: Tables: Add mechanism to control early table checksum verification.
ACPI / scan: use platform bus type by default for _HID enumeration
ACPI / scan: always register ACPI LPSS scan handler
ACPI / scan: always register memory hotplug scan handler
ACPI / scan: always register container scan handler
ACPI / scan: Change the meaning of missing .attach() in scan handlers
ACPI / scan: introduce platform_id device PNP type flag
ACPI / scan: drop unsupported serial IDs from PNP ACPI scan handler ID list
ACPI / scan: drop IDs that do not comply with the ACPI PNP ID rule
ACPI / PNP: use device ID list for PNPACPI device enumeration
ACPI / scan: .match() callback for ACPI scan handlers
ACPI / battery: wakeup the system only when necessary
power_supply: allow power supply devices registered w/o wakeup source
...
Fix perf probe to find correct variable DIE which has location or
external instance by tracking down the lexical blocks.
Current die_find_variable() expects that the all variable DIEs
which has DW_TAG_variable have a location. However, since recent
dwarf information may have declaration variable DIEs at the
entry of function (subprogram), die_find_variable() returns it.
To solve this problem, it must track down the DIE tree to find
a DIE which has an actual location or a reference for external
instance.
e.g. finding a DIE which origin is <0xdc73>;
<1><11496>: Abbrev Number: 95 (DW_TAG_subprogram)
<11497> DW_AT_abstract_origin: <0xdc42>
<1149b> DW_AT_low_pc : 0x1850
[...]
<2><114cc>: Abbrev Number: 119 (DW_TAG_variable) <- this is a declaration
<114cd> DW_AT_abstract_origin: <0xdc73>
<2><114d1>: Abbrev Number: 119 (DW_TAG_variable)
[...]
<3><115a7>: Abbrev Number: 105 (DW_TAG_lexical_block)
<115a8> DW_AT_ranges : 0xaa0
<4><115ac>: Abbrev Number: 96 (DW_TAG_variable) <- this has a location
<115ad> DW_AT_abstract_origin: <0xdc73>
<115b1> DW_AT_location : 0x486c (location list)
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20140529121930.30879.87092.stgit@ltc230.yrl.intra.hitachi.co.jp
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Fix a segfault bug by asking for variable it doesn't find.
Since the convert_variable() didn't handle error code returned
from convert_variable_location(), it just passed an incomplete
variable field and then a segfault was occurred when formatting
the field.
This fixes that bug by handling success code correctly in
convert_variable(). Other callers of convert_variable_location()
are correctly checking the return code.
This bug was introduced by following commit. But another hidden
erroneous error handling has been there previously (-ENOMEM case).
commit 3d918a12a1
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20140529105232.28251.30447.stgit@ltc230.yrl.intra.hitachi.co.jp
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
* acpi-tools:
ACPI / tools: Introduce ec_access.c - tool to access the EC
* pm-tools:
cpupower: Remove mc and smt power aware scheduler info/settings
cpupower: cpupower info -b should return 0 on success, not the perf bias value
cpupower: If root, try to load msr driver on x86 if /dev/cpu/0/msr is not available
cpupower: Install recently added cpupower-idle-{set, info} manpages
cpupower: Introduce idle state disable-by-latency and enable-all
cpupower: Remove all manpages on make uninstall
cpupower: Remove dead link to homepage, and update the targets built.
cpupower: Rename cpufrequtils -> cpupower, and libcpufreq -> libcpupower.
PM / tools: cpupower: add option to display values without round offs
tools / power: turbostat: Drop temperature checks
* pm-cpufreq: (28 commits)
cpufreq: handle calls to ->target_index() in separate routine
cpufreq: s5pv210: drop check for CONFIG_PM_VERBOSE
cpufreq: intel_pstate: Remove unused member name of cpudata
cpufreq: Break out early when frequency equals target_freq
cpufreq: Tegra: drop wrapper around tegra_update_cpu_speed()
cpufreq: imx6q: Remove unused include
cpufreq: imx6q: Drop devm_clk/regulator_get usage
cpufreq: powernow-k8: Suppress checkpatch warnings
cpufreq: powernv: make local function static
cpufreq: Enable big.LITTLE cpufreq driver on arm64
cpufreq: nforce2: remove DEFINE_PCI_DEVICE_TABLE macro
intel_pstate: Add CPU IDs for Broadwell processors
cpufreq: Fix build error on some platforms that use cpufreq_for_each_*
PM / OPP: Move cpufreq specific OPP functions out of generic OPP library
PM / OPP: Remove cpufreq wrapper dependency on internal data organization
cpufreq: Catch double invocations of cpufreq_freq_transition_begin/end
intel_pstate: Remove sample parameter in intel_pstate_calc_busy
cpufreq: Kconfig: Fix spelling errors
cpufreq: Make linux-pm@vger.kernel.org official mailing list
cpufreq: exynos: Use dev_err/info function instead of pr_err/info
...
* acpica: (63 commits)
ACPICA: Namespace: Remove _PRP method support.
ACPI: Fix x86 regression related to early mapping size limitation
ACPICA: Tables: Add mechanism to control early table checksum verification.
ACPICA: acpidump: Fix repetitive table dump in -n mode.
ACPI: Clean up acpi_os_map/unmap_memory() to eliminate __iomem.
ACPICA: Clean up redudant definitions already defined elsewhere
ACPICA: Linux headers: Add <asm/acenv.h> to remove mis-ordered inclusion of <asm/acpi.h>
ACPICA: Linux headers: Add <acpi/platform/aclinuxex.h>
ACPICA: Linux headers: Remove ACPI_PREEMPTION_POINT() due to no usages.
ACPICA: Update version to 20140424.
ACPICA: Comment/format update, no functional change.
ACPICA: Events: Update GPE handling and initialization code.
ACPICA: Remove extraneous error message for large number of GPEs.
ACPICA: Tables: Remove old mechanism to validate if XSDT contains NULL entries.
ACPICA: Tables: Add new mechanism to skip NULL entries in RSDT and XSDT.
ACPICA: acpidump: Add support to force using RSDT.
ACPICA: Back port of improvements on exception code.
ACPICA: Back port of _PRP update.
ACPICA: acpidump: Fix truncated RSDP signature validation.
ACPICA: Linux header: Add support for stubbed externals.
...
Pull perf updates from Ingo Molnar:
"The tooling changes maintained by Jiri Olsa until Arnaldo is on
vacation:
User visible changes:
- Add -F option for specifying output fields (Namhyung Kim)
- Propagate exit status of a command line workload for record command
(Namhyung Kim)
- Use tid for finding thread (Namhyung Kim)
- Clarify the output of perf sched map plus small sched command
fixes (Dongsheng Yang)
- Wire up perf_regs and unwind support for ARM64 (Jean Pihet)
- Factor hists statistics counts processing which in turn also fixes
several bugs in TUI report command (Namhyung Kim)
- Add --percentage option to control absolute/relative percentage
output (Namhyung Kim)
- Add --list-cmds to 'kmem', 'mem', 'lock' and 'sched', for use by
completion scripts (Ramkumar Ramachandra)
Development/infrastructure changes and fixes:
- Android related fixes for pager and map dso resolving (Michael
Lentine)
- Add libdw DWARF post unwind support for ARM (Jean Pihet)
- Consolidate types.h for ARM and ARM64 (Jean Pihet)
- Fix possible null pointer dereference in session.c (Masanari Iida)
- Cleanup, remove unused variables in map_switch_event() (Dongsheng
Yang)
- Remove nr_state_machine_bugs in perf latency (Dongsheng Yang)
- Remove usage of trace_sched_wakeup(.success) (Peter Zijlstra)
- Cleanups for perf.h header (Jiri Olsa)
- Consolidate types.h and export.h within tools (Borislav Petkov)
- Move u64_swap union to its single user's header, evsel.h (Borislav
Petkov)
- Fix for s390 to properly parse tracepoints plus test code
(Alexander Yarygin)
- Handle EINTR error for readn/writen (Namhyung Kim)
- Add a test case for hists filtering (Namhyung Kim)
- Share map_groups among threads of the same group (Arnaldo Carvalho
de Melo, Jiri Olsa)
- Making some code (cpu node map and report parse callchain callback)
global to be usable by upcomming changes (Don Zickus)
- Fix pmu object compilation error (Jiri Olsa)
Kernel side changes:
- intrusive uprobes fixes from Oleg Nesterov. Since the interface is
admin-only, and the bug only affects user-space ("any probed
jmp/call can kill the application"), we queued these fixes via the
development tree, as a special exception.
- more fuzzer motivated race fixes and related refactoring and
robustization.
- allow PMU drivers to be built as modules. (No actual module yet,
because the x86 Intel uncore module wasn't ready in time for this)"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
perf tools: Add automatic remapping of Android libraries
perf tools: Add cat as fallback pager
perf tests: Add a testcase for histogram output sorting
perf tests: Factor out print_hists_*()
perf tools: Introduce reset_output_field()
perf tools: Get rid of obsolete hist_entry__sort_list
perf hists: Reset width of output fields with header length
perf tools: Skip elided sort entries
perf top: Add --fields option to specify output fields
perf report/tui: Fix a bug when --fields/sort is given
perf tools: Add ->sort() member to struct sort_entry
perf report: Add -F option to specify output fields
perf tools: Call perf_hpp__init() before setting up GUI browsers
perf tools: Consolidate management of default sort orders
perf tools: Allow hpp fields to be sort keys
perf ui: Get rid of callback from __hpp__fmt()
perf tools: Consolidate output field handling to hpp format routines
perf tools: Use hpp formats to sort final output
perf tools: Support event grouping in hpp ->sort()
perf tools: Use hpp formats to sort hist entries
...
Pull RCU changes from Ingo Molnar:
"The main RCU changes in this cycle were:
- RCU torture-test changes.
- variable-name renaming cleanup.
- update RCU documentation.
- miscellaneous fixes.
- patch to suppress RCU stall warnings while sysrq requests are being
processed"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (68 commits)
rcu: Provide API to suppress stall warnings while sysrc runs
rcu: Variable name changed in tree_plugin.h and used in tree.c
torture: Remove unused definition
torture: Remove __init from torture_init_begin/end
torture: Check for multiple concurrent torture tests
locktorture: Remove reference to nonexistent Kconfig parameter
rcutorture: Run rcu_torture_writer at normal priority
rcutorture: Note diffs from git commits
rcutorture: Add missing destroy_timer_on_stack()
rcutorture: Explicitly test synchronous grace-period primitives
rcutorture: Add tests for get_state_synchronize_rcu()
rcutorture: Test RCU-sched primitives in TREE_PREEMPT_RCU kernels
torture: Use elapsed time to detect hangs
rcutorture: Check for rcu_torture_fqs creation errors
torture: Better summary diagnostics for build failures
torture: Notice if an all-zero cpumask is passed inside a critical section
rcutorture: Make rcu_torture_reader() use cond_resched()
sched,rcu: Make cond_resched() report RCU quiescent states
percpu: Fix raw_cpu_inc_return()
rcutorture: Export RCU grace-period kthread wait state to rcutorture
...
Here is the big USB driver pull request for 3.16-rc1.
Nothing huge here, but lots of little things in the USB core, and in
lots of drivers. Hopefully the USB power management will be work better
now that it has been reworked to do per-port power control dynamically.
There's also a raft of gadget driver updates and fixes, CONFIG_USB_DEBUG
is finally gone now that everything has been converted over to the
dynamic debug inteface, the last hold-out drivers were cleaned up and
the config option removed. There were also other minor things all
through the drivers/usb/ tree, the shortlog shows this pretty well.
All have been in linux-next, including the very last patch, which came
from linux-next to fix a build issue on some platforms.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlONYEMACgkQMUfUDdst+ynxvgCggMQBhN5icth8Y5hFglNNaISN
c4AAoMHR2kb62U1plylLbPnboQTjfcl0
=fG6y
-----END PGP SIGNATURE-----
Merge tag 'usb-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb into next
Pull USB driver updates from Greg KH:
"Here is the big USB driver pull request for 3.16-rc1.
Nothing huge here, but lots of little things in the USB core, and in
lots of drivers. Hopefully the USB power management will be work
better now that it has been reworked to do per-port power control
dynamically. There's also a raft of gadget driver updates and fixes,
CONFIG_USB_DEBUG is finally gone now that everything has been
converted over to the dynamic debug inteface, the last hold-out
drivers were cleaned up and the config option removed. There were
also other minor things all through the drivers/usb/ tree, the
shortlog shows this pretty well.
All have been in linux-next, including the very last patch, which came
from linux-next to fix a build issue on some platforms"
* tag 'usb-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (314 commits)
usb: hub_handle_remote_wakeup() only exists for CONFIG_PM=y
USB: orinoco_usb: remove CONFIG_USB_DEBUG support
USB: media: lirc: igorplugusb: remove CONFIG_USB_DEBUG support
USB: media: streamzap: remove CONFIG_USB_DEBUG
USB: media: redrat3: remove CONFIG_USB_DEBUG usage
USB: media: redrat3: remove unneeded tracing macro
usb: qcserial: add additional Sierra Wireless QMI devices
usb: host: max3421-hcd: Use module_spi_driver
usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity
usb: host: max3421-hcd: fix "spi_rd8" uses dynamic stack allocation warning
usb: host: max3421-hcd: Fix missing unlock in max3421_urb_enqueue()
usb: qcserial: add Netgear AirCard 341U
Documentation: dt-bindings: update xhci-platform DT binding for R-Car H2 and M2
usb: host: xhci-plat: add xhci_plat_start()
usb: host: max3421-hcd: Fix potential NULL urb dereference
Revert "usb: gadget: net2280: Add support for PLX USB338X"
USB: usbip: remove CONFIG_USB_DEBUG reference
USB: remove CONFIG_USB_DEBUG from defconfig files
usb: resume child device when port is powered on
usb: hub_handle_remote_wakeup() depends on CONFIG_PM_RUNTIME=y
...
In "-n" mode, reserved tables (RSDP/RSDT/XSDT/DSDT/FACS) are dumped
multiple times due a missing instance check in osl_get_bios_table().
This patch fixes this issue.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Not a lot here during this merge window. Mostly we just have
the usual miscellaneous patches (removal of unnecessary prints,
proper dependencies being added to Kconfig, build warning fixes,
new device ID, etc.
Other than those, the only important new features are the
new support for OS Strings which should help Linux Gadget
Drivers behave better under MS Windows. Also Babble Recovery
implementation for MUSB on AM335x. Lastly, we also have
ARCH_QCOM PHY support though phy-msm.
Signed-of-by: Felipe Balbi <balbi@ti.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Q1jA
-----END PGP SIGNATURE-----
Merge tag 'usb-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
usb: patches for v3.16 merge window
Not a lot here during this merge window. Mostly we just have
the usual miscellaneous patches (removal of unnecessary prints,
proper dependencies being added to Kconfig, build warning fixes,
new device ID, etc.
Other than those, the only important new features are the
new support for OS Strings which should help Linux Gadget
Drivers behave better under MS Windows. Also Babble Recovery
implementation for MUSB on AM335x. Lastly, we also have
ARCH_QCOM PHY support though phy-msm.
Signed-of-by: Felipe Balbi <balbi@ti.com>
Conflicts:
drivers/usb/phy/phy-mv-u3d-usb.c
Pull RCU updates from Paul E. McKenney:
" 1. Update RCU documentation. These were posted to LKML at
https://lkml.org/lkml/2014/4/28/634.
2. Miscellaneous fixes. These were posted to LKML at
https://lkml.org/lkml/2014/4/28/645.
3. Torture-test changes. These were posted to LKML at
https://lkml.org/lkml/2014/4/28/667.
4. Variable-name renaming cleanup, sent separately due to conflicts.
This was posted to LKML at https://lkml.org/lkml/2014/5/13/854.
5. Patch to suppress RCU stall warnings while sysrq requests are
being processed. This patch is the RCU portions of the patch
that Rik posted to LKML at https://lkml.org/lkml/2014/4/29/457.
The reason for pushing this patch ahead instead of waiting until
3.17 is that the NMI-based stack traces are messing up sysrq
output, and in some cases also messing up the system as well."
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch automatically adjusts the path of MMAP records
associated with Android system libraries.
The Android system is organized with system libraries found in
/system/lib and user libraries in /data/app-lib. On the host system
(not running Android), system libraries can be found in the downloaded
NDK directory under ${NDK_ROOT}/platforms/${APP_PLATFORM}/arch-${ARCH}/usr/lib
and the user libraries are installed under libs/${APP_ABI} within
the apk build directory. This patch makes running the reporting
tools possible on the host system using the libraries from the NDK.
Signed-off-by: Michael Lentine <mlentine@google.com>
Reviewed-by: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1400579330-5043-3-git-send-email-eranian@google.com
[ fixed 'space required before the open parenthesis' checkpatch.pl errors ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
This patch adds a fallback to cat for the pager. This is useful
on environments, such as Android, where less does not exist.
It is better to default to cat than to abort.
Signed-off-by: Michael Lentine <mlentine@google.com>
Reviewed-by: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1400579330-5043-2-git-send-email-eranian@google.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Now we moved to the perf_hpp_[_sort]_list so no need to keep the old
hist_entry__sort_list and sort__first_dimension. Also the
hist_entry__sort_snprintf() can be gone as hist_entry__snprintf()
provides the functionality.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-18-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
The --fields option is to allow user setup output field in any order.
It can receive any sort keys and following (hpp) fields:
overhead, overhead_sys, overhead_us, sample and period
If guest profiling is enabled, overhead_guest_{sys,us} will be
available too.
More more information, please see previous patch "perf report:
Add -F option to specify output fields"
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-15-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
The hists__filter_entries() function is called when down arrow key is
pressed for navigating through the entries in TUI. It has a check for
filtering out entries that have very small overhead (under min_pcnt).
However it just assumed the entries are sorted by the overhead so when
it saw such a small overheaded entry, it just stopped navigating as an
optimization. But it's not true anymore due to new --fields and
--sort optoin behavior and this case users cannot go down to a next
entry if ther's an entry with small overhead in-between.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-14-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Currently, what the sort_entry does is just identifying hist entries
so that they can be grouped properly. However, with -F option
support, it indeed needs to sort entries appropriately to be shown to
users. So add ->sort() member to do it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-13-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
The -F/--fields option is to allow user setup output field in any
order. It can receive any sort keys and following (hpp) fields:
overhead, overhead_sys, overhead_us, sample and period
If guest profiling is enabled, overhead_guest_{sys,us} will be
available too.
The output fields also affect sort order unless you give -s/--sort
option. And any keys specified on -s option, will also be added to
the output field list automatically.
$ perf report -F sym,sample,overhead
...
# Symbol Samples Overhead
# .......................... ............ ........
#
[.] __cxa_atexit 2 2.50%
[.] __libc_csu_init 4 5.00%
[.] __new_exitfn 3 3.75%
[.] _dl_check_map_versions 1 1.25%
[.] _dl_name_match_p 4 5.00%
[.] _dl_setup_hash 1 1.25%
[.] _dl_sysdep_start 1 1.25%
[.] _init 5 6.25%
[.] _setjmp 6 7.50%
[.] a 8 10.00%
[.] b 8 10.00%
[.] brk 1 1.25%
[.] c 8 10.00%
Note that, the example output above is captured after applying next
patch which fixes sort/comparing behavior.
Requested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-12-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
So that it can be set properly prior to set up output fields. That
makes easy to handle/warn errors during the setup since it doesn't
need to be bothered with the GUI.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-11-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
The perf uses different default sort orders for different use-cases,
and this was scattered throughout the code. Add get_default_sort_
order() function to handle this and change initial value of sort_order
to NULL to distinguish it from user-given one.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1400480762-22852-10-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
The callback was used by TUI for determining color of folded sign
using percent of first field/column. But it cannot be used anymore
since it now support dynamic reordering of output field.
So move the logic to the hist_browser__show_entry().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-8-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Until now the hpp and sort functions do similar jobs different ways.
Since the sort functions converted/wrapped to hpp formats it can do
the job in a uniform way.
The perf_hpp__sort_list has a list of hpp formats to sort entries and
the perf_hpp__list has a list of hpp formats to print output result.
To have a backward compatibility, it automatically adds 'overhead'
field in front of sort list. And then all of fields in sort list
added to the output list (if it's not already there).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/n/tip-7g3h86woz2sckg3h1lj42ygj@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Move logic of hist_entry__sort_on_period to __hpp__sort() in order to
support event group report.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-5-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Those function pointers will be used to sort report output based on
the selected fields. This is a preparation of later change.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-2-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
These kernel interfaces got removed by:
commit 8e7fbcbc22
Author: Peter Zijlstra <peterz@infradead.org>
Date: Mon Jan 9 11:28:35 2012 +0100
sched: Remove stale power aware scheduling remnants and dysfunctional knobs
No need to further keep them as userspace configurations.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
