Get rid of the unnecessary refcounting on callback structs.
Copy interesting callback info into the lkb struct rather
than maintaining pointers to callback structs from the lkb.
This goes back to the way things were done prior to
commit 61bed0baa4 ("fs: dlm: use a non-static queue for callbacks").
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes the following issue:
node 1 is dir
node 2 is master
node 3 is other
1->2: unlock
2: put final lkb, rsb moved to toss
2->1: unlock_reply
1: queue lkb callback with EUNLOCK
2->1: remove
1: receive_remove ignored (rsb on keep because of queued lkb callback)
1: complete lkb callback, put_lkb, move rsb to toss
3->1: lookup
1->3: lookup_reply master=2
3->2: request
2->3: request_reply EBADR
In summary:
An unexpected lkb reference causes the rsb to remain on the wrong list.
The rsb being on the wrong list causes receive_remove to be ignored.
An ignored receive_remove causes inconsistent dir and master state.
This sequence requires an unusually long delay in delivering the unlock
callback, because the remove message from 2->1 usually happens after
some seconds. So, it's not known exactly how frequently this sequence
occurs in pratice. It's possible that the same end result could also
have another unknown cause.
The solution for this issue is to further separate callback state
from the lkb, so that an lkb reference (and from that, an rsb ref)
are not held while a callback remains queued. Then, within the
unlock_reply, the lkb will be freed and the rsb moved to the toss
list. So, the receive_remove will not be ignored.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch combines the failure and default cases for enqueue and
dequeue a callback to the lkb callback queue that should end in both
cases as it should never happen.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Stop using lkb structs in the callback tracepoints so that lkb
references are not needed. This prepares for separating lkb
structs from callbacks.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes the copy lvb decision for user space lock requests.
Checking dlm_lvb_operations is done earlier, where granted/requested
lock modes are available to use in the matrix.
The decision had been moved to the wrong location, where granted mode
and requested mode where the same, which causes the dlm_lvb_operations
matix to produce the wrong copy decision. For PW or EX requests, the
caller could get invalid lvb data.
Fixes: 61bed0baa4 ("fs: dlm: use a non-static queue for callbacks")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes to check on the right return value if it was the last
callback. The rv variable got overwritten by the return of
copy_result_to_user(). Fixing it by introducing a second variable for
the return value and don't let rv being overwritten.
Cc: stable@vger.kernel.org
Fixes: 61bed0baa4 ("fs: dlm: use a non-static queue for callbacks")
Reported-by: Valentin Vidić <vvidic@valentin-vidic.from.hr>
Closes: https://lore.kernel.org/gfs2/Ze4qSvzGJDt5yxC3@valentin-vidic.from.hr
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch moves the dlm_purge_lkb_callbacks() function from ast to user
dlm module as it is only a function being used by dlm user
implementation. I got be hinted to hold specific locks regarding the
callback handling for dlm_purge_lkb_callbacks() but it was false
positive. It is confusing because ast dlm implementation uses a
different locking behaviour as user locks uses as DLM handles kernel and
user dlm locks differently. To avoid the confusing we move this function
to dlm user implementation.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will move the lkb_flags value to the recently introduced
lkb_iflags value. For lkb_iflags we use atomic bit operations because
some flags like DLM_IFL_CB_PENDING are used while non rsb lock is held
to avoid issues with other flag manipulations which might run at the
same time we switch to atomic bit operations. Snapshot the bit values to
an uint32_t value is only used for debugging/logging use cases and don't
need to be 100% correct.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Currently manipulating lkb_dflags assumes to held the rsb lock assigned
to the lkb. This is held by dlm message processing after certain
time to lookup the right rsb from the received lkb message id. For user
space locks flags, which is currently the only use case for lkb_dflags,
flags are also being set during dlm character device handling without
holding the rsb lock. To minimize the risk that bit operations are
getting corrupted we switch to atomic bit operations. This patch will
also introduce helpers to snapshot atomic bit values in an non atomic
way. There might be still issues with the flag handling e.g. running in
case of manipulating bit ops and snapshot them at the same time, but this
patch minimize them and will start to use atomic bit operations.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch stores lkb distributed flags value in an separate value
instead of sharing internal and distributed flags in lkb->lkb_flags value.
This has the advantage to not mask/write back flag values in
receive_flags() functionality. The dlm debug_fs does not provide the
distributed flags anymore, those can be added in future.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes code parts which was declared deprecated by
commit 6b0afc0cc3 ("fs: dlm: don't use deprecated timeout features by
default"). This contains the following dlm functionality:
- start a cancel of a dlm request did not complete after certain timeout:
The current way how dlm cancellation works and interfering with other
dlm requests triggered by the user can end in an overlapping and
returning in -EBUSY. The most user don't handle this case and are
unaware that DLM can return such errno in such situation. Due the
timeout the user are mostly unaware when this happens.
- start a netlink warning messages for user space if dlm requests did
not complete after certain timeout:
This feature was never being built in the only known dlm user space side.
As we are to remove the timeout cancellation feature we can directly
remove this feature as well.
There might be the possibility to bring the timeout cancellation feature
back. However the current way of handling the -EBUSY case which is only
a software limitation and not a hardware limitation should be changed.
We minimize the current code base in DLM cancellation feature to not have
to deal with those existing features while solving the DLM cancellation
feature in general.
UAPI define DLM_LSFL_TIMEWARN is commented as deprecated and reserved
value. We should avoid at first to give it a new meaning but let
possible users still compile by keeping this define. In far future we
can give this flag a new meaning. The same for the DLM_LKF_TIMEOUT lock
request flag.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch introduce a new internal flag per lkb value to handle
internal flags which are handled not on wire. The current lkb internal
flags stored as lkb->lkb_flags are split in upper and lower bits, the
lower bits are used to share internal flags over wire for other cluster
wide lkb copies on other nodes.
In commit 61bed0baa4 ("fs: dlm: use a non-static queue for callbacks")
we introduced a new internal flag for pending callbacks for the dlm
callback queue. This flag is protected by the lkb->lkb_cb_lock lock.
This patch overlooked that on dlm receive path and the mentioned upper
and lower bits, that dlm will read the flags, mask it and write it
back. As example receive_flags() in fs/dlm/lock.c. This flag
manipulation is not done atomically and is not protected by
lkb->lkb_cb_lock. This has unknown side effects of the current callback
handling.
In future we should move to set/clear/test bit functionality and avoid
read, mask and writing back flag values. In later patches we will move
the upper parts to the new introduced internal lkb flags which are not
shared between other cluster nodes to the new non shared internal flag
field to avoid similar issues.
Cc: stable@vger.kernel.org
Fixes: 61bed0baa4 ("fs: dlm: use a non-static queue for callbacks")
Reported-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch renames DLM_IFL_NEED_SCHED to DLM_IFL_CB_PENDING because
CB_PENDING is a proper name to describe this flag. This flag is set when
callback enqueue will return DLM_ENQUEUE_CALLBACK_NEED_SCHED because the
callback worker need to be queued. The flag tells that callbacks are
currently pending to be called and will be unset if the callback work
for the specific lkb is done. The term need schedule is part of this
time but a proper name is to say that there are some callbacks pending
to being called.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the ast hotpath functionality in very unlikely cases
that we do WARN_ON_ONCE() instead of WARN_ON() to not spamming the
console output if we run into states that it would occur over and over
again.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will introducde a queue implementation for callbacks by using
the Linux lists. The current callback queue handling is implemented by a
static limit of 6 entries, see DLM_CALLBACKS_SIZE. The sequence number
inside the callback structure was used to see if the entries inside the
static entry is valid or not. We don't need any sequence numbers anymore
with a dynamic datastructure with grows and shrinks during runtime to
offer such functionality.
We assume that every callback will be delivered to the DLM user if once
queued. Therefore the callback flag DLM_CB_SKIP was dropped and the
check for skipping bast was moved before worker handling and not skip
while the callback worker executes. This will reduce unnecessary queues
of the callback worker.
All last callback saves are pointers now and don't need to copied over.
There is a reference counter for callback structures which will care
about to free the callback structures at the right time if they are not
referenced anymore.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Instead of using list_entry() this patch moves to using the
list_first_entry() macro.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The DLM_LSFL_FS flag is set in lockspaces created directly
for a kernel user, as opposed to those lockspaces created
for user space applications. The user space libdlm allowed
this flag to be set for lockspaces created from user space,
but then used by a kernel user. No kernel user has ever
used this method, so remove the ability to do it.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds trace callbacks for user locks. Unfortenately user locks
are handled in a different way than kernel locks in some cases. User
locks never call the dlm_lock()/dlm_unlock() kernel API and use the next
step internal API of dlm. Adding those traces from user API callers
should make it possible for dlm trace system to see lock handling for
user locks as well.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the ls_clear_proc_locks to a spinlock because there
is no need to handle it as a mutex as there is no sleepable context when
ls_clear_proc_locks is held. This allows us to call those functionality
in non-sleepable contexts.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will disable use of deprecated timeout features if
CONFIG_DLM_DEPRECATED_API is not set. The deprecated features
will be removed in upcoming kernel release v6.2.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds a CONFIG_DLM_DEPRECATED_API Kconfig option
that must be enabled to use two timeout-related features
that we intend to remove in kernel v6.2. Warnings are
printed if either is enabled and used. Neither has ever
been used as far as we know.
. The DLM_LSFL_TIMEWARN lockspace creation flag will be
removed, along with the associated configfs entry for
setting the timeout. Setting the flag and configfs file
would cause dlm to track how long locks were waiting
for reply messages. After a timeout, a kernel message
would be logged, and a netlink message would be sent
to userspace. Recently, midcomms messages have been
added that produce much better logging about actual
problems with messages. No use has ever been found
for the netlink messages.
. The userspace libdlm API has allowed the DLM_LKF_TIMEOUT
flag with a timeout value to be set in lock requests.
The lock request would be cancelled after the timeout.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Remove the unused timeout parameter from dlm_user_adopt_orphan().
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch avoids the following sparse warning:
fs/dlm/user.c:111:38: warning: incorrect type in assignment (different address spaces)
fs/dlm/user.c:111:38: expected void [noderef] __user *castparam
fs/dlm/user.c:111:38: got void *
fs/dlm/user.c:112:37: warning: incorrect type in assignment (different address spaces)
fs/dlm/user.c:112:37: expected void [noderef] __user *castaddr
fs/dlm/user.c:112:37: got void *
fs/dlm/user.c:113:38: warning: incorrect type in assignment (different address spaces)
fs/dlm/user.c:113:38: expected void [noderef] __user *bastparam
fs/dlm/user.c:113:38: got void *
fs/dlm/user.c:114:37: warning: incorrect type in assignment (different address spaces)
fs/dlm/user.c:114:37: expected void [noderef] __user *bastaddr
fs/dlm/user.c:114:37: got void *
fs/dlm/user.c:115:33: warning: incorrect type in assignment (different address spaces)
fs/dlm/user.c:115:33: expected struct dlm_lksb [noderef] __user *lksb
fs/dlm/user.c:115:33: got void *
fs/dlm/user.c:130:39: warning: cast removes address space '__user' of expression
fs/dlm/user.c:131:40: warning: cast removes address space '__user' of expression
fs/dlm/user.c:132:36: warning: cast removes address space '__user' of expression
So far I see there is no direct handling of copying a pointer value to
another pointer value. The handling only copies the actual pointer
address to a scalar type or vice versa. This should be okay because it
never handles dereferencing anything of those addresses in the kernel
space. To get rid of those warnings we doing some different casting
which results in no warnings in sparse or compiler.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Based on 1 normalized pattern(s):
this copyrighted material is made available to anyone wishing to use
modify copy or redistribute it subject to the terms and conditions
of the gnu general public license v 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 45 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170027.342746075@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The warning added in commit 3b0e761ba8
"dlm: print log message when cluster name is not set"
did not account for the fact that lockspaces created
from userland do not supply a cluster name, so bogus
warnings are printed every time a userland lockspace
is created.
Signed-off-by: David Teigland <teigland@redhat.com>
In copy_result_to_user(), we first create a struct dlm_lock_result, which
contains a struct dlm_lksb, the last member of which is a pointer to the
lvb. Unfortunately, we copy the entire struct dlm_lksb to the result
struct, which is then copied to userspace at the end of the function,
leaking the contents of sb_lvbptr, which is a valid kernel pointer in some
cases (indeed, later in the same function the data it points to is copied
to userspace).
It is an error to leak kernel pointers to userspace, as it undermines KASLR
protections (see e.g. 65eea8edc3 ("floppy: Do not copy a kernel pointer to
user memory in FDGETPRM ioctl") for another example of this).
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: David Teigland <teigland@redhat.com>
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Clear the 'unused' field and the uninitialized padding in 'lksb' to
avoid leaking memory to userland in copy_result_to_user().
Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Signed-off-by: David Teigland <teigland@redhat.com>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends. That changed
when we forked out support for the latter into the export.h file.
This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.
In the case of some code where it is modular, we can extend that to
also include files that are building basic support functionality but
not related to loading or registering the final module; such files
also have no need whatsoever for module.h
The advantage in removing such instances is that module.h itself
sources about 15 other headers; adding significantly to what we feed
cpp, and it can obscure what headers we are effectively using.
Since module.h might have been the implicit source for init.h
(for __init) and for export.h (for EXPORT_SYMBOL) we consider each
instance for the presence of either and replace as needed.
In the dlm case, we remove module.h from a global header and only
introduce it in the files where it is explicitly required, since
there is nothing modular in dlm_internal.h itself.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David Teigland <teigland@redhat.com>
it's "bugger off if we got ERR_PTR", not the other way round...
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
A _lot_ of ->write() instances were open-coding it; some are
converted to memdup_user_nul(), a lot more remain...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This set mainly includes a change to the way the
dlm uses the SCTP API in the kernel, removing the
direct dependency on the sctp module. Other odd
SCTP-related fixes are also included. The other
notable fix is for a long standing regression in
the behavior of lock value blocks for user space
locks.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=iYRu
-----END PGP SIGNATURE-----
Merge tag 'dlm-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This set mainly includes a change to the way the dlm uses the SCTP API
in the kernel, removing the direct dependency on the sctp module.
Other odd SCTP-related fixes are also included.
The other notable fix is for a long standing regression in the
behavior of lock value blocks for user space locks"
* tag 'dlm-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: print error from kernel_sendpage
dlm: fix lvb copy for user locks
dlm: sctp_accept_from_sock() can be static
dlm: fix reconnecting but not sending data
dlm: replace BUG_ON with a less severe handling
dlm: use sctp 1-to-1 API
dlm: fix not reconnecting on connecting error handling
dlm: fix race while closing connections
dlm: fix connection stealing if using SCTP
For a userland lock request, the previous and current
lock modes are used to decide when the lvb should be
copied back to the user. The wrong previous value was
used, so that it always matched the current value.
This caused the lvb to be copied back to the user in
the wrong cases.
Signed-off-by: David Teigland <teigland@redhat.com>
With well over 200+ users of this api, there are a mere 12 users that
actually checked the return value of this function. And all of them
really didn't do anything with that information as the system or module
was shutting down no matter what.
So stop pretending like it matters, and just return void from
misc_deregister(). If something goes wrong in the call, you will get a
WARNING splat in the syslog so you know how to fix up your driver.
Other than that, there's nothing that can go wrong.
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Neil Brown <neilb@suse.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Christine Caulfield <ccaulfie@redhat.com>
Cc: David Teigland <teigland@redhat.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A process may exit, leaving an orphan lock in the lockspace.
This adds the capability for another process to acquire the
orphan lock. Acquiring the orphan just moves the lock from
the orphan list onto the acquiring process's list of locks.
An adopting process must specify the resource name and mode
of the lock it wants to adopt. If a matching lock is found,
the lock is moved to the caller's 's list of locks, and the
lkid of the lock is returned like the lkid of a new lock.
If an orphan with a different mode is found, then -EAGAIN is
returned. If no orphan lock is found on the resource, then
-ENOENT is returned. No async completion is used because
the result is immediately available.
Also, when orphans are purged, allow a zero nodeid to refer
to the local nodeid so the caller does not need to look up
the local nodeid.
Signed-off-by: David Teigland <teigland@redhat.com>
Return EINVAL from write if the size is larger than
allowed. Do this before allocating kernel memory for
the bogus size, which could lead to OOM.
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Tested-by: Jana Saout <jana@saout.de>
Signed-off-by: David Teigland <teigland@redhat.com>
device_write only checks whether the request size is big enough, but it doesn't
check if the size is too big.
At that point, it also tries to allocate as much memory as the user has requested
even if it's too much. This can lead to OOM killer kicking in, or memory corruption
if (count + 1) overflows.
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>
These new callbacks notify the dlm user about lock recovery.
GFS2, and possibly others, need to be aware of when the dlm
will be doing lock recovery for a failed lockspace member.
In the past, this coordination has been done between dlm and
file system daemons in userspace, which then direct their
kernel counterparts. These callbacks allow the same
coordination directly, and more simply.
Signed-off-by: David Teigland <teigland@redhat.com>
Instead of creating our own kthread (dlm_astd) to deliver
callbacks for all lockspaces, use a per-lockspace workqueue
to deliver the callbacks. This eliminates complications and
slowdowns from many lockspaces sharing the same thread.
Signed-off-by: David Teigland <teigland@redhat.com>
recalc_sigpending() is called within sigprocmask(), so there is no
need call it again after sigprocmask() has returned.
Signed-off-by: Matt Fleming <matt.fleming@linux.intel.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Change how callbacks are recorded for locks. Previously, information
about multiple callbacks was combined into a couple of variables that
indicated what the end result should be. In some situations, we
could not tell from this combined state what the exact sequence of
callbacks were, and would end up either delivering the callbacks in
the wrong order, or suppress redundant callbacks incorrectly. This
new approach records all the data for each callback, leaving no
uncertainty about what needs to be delivered.
Signed-off-by: David Teigland <teigland@redhat.com>
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.
The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.
New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time. Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.
The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.
Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.
Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.
===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
// but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}
@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}
@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}
@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}
@ fops0 @
identifier fops;
@@
struct file_operations fops = {
...
};
@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
.llseek = llseek_f,
...
};
@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
.read = read_f,
...
};
@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
.write = write_f,
...
};
@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
.open = open_f,
...
};
// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
... .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};
@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
... .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};
// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
... .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};
// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};
// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};
@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+ .llseek = default_llseek, /* write accesses f_pos */
};
// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////
@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
.write = write_f,
.read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};
@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};
@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};
@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Commit 7fe2b3190b fixed possible
misordering of completion asts (casts) and blocking asts (basts)
for kernel locks. This patch does the same for locks taken by
user space applications.
Signed-off-by: David Teigland <teigland@redhat.com>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
When both blocking and completion callbacks are queued for lock,
the dlm would always deliver the completion callback (cast) first.
In some cases the blocking callback (bast) is queued before the
cast, though, and should be delivered first. This patch keeps
track of the order in which they were queued and delivers them
in that order.
This patch also keeps track of the granted mode in the last cast
and eliminates the following bast if the bast mode is compatible
with the preceding cast mode. This happens when a remotely mastered
lock is demoted, e.g. EX->NL, in which case the local node queues
a cast immediately after sending the demote message. In this way
a cast can be queued for a mode, e.g. NL, that makes an in-transit
bast extraneous.
Signed-off-by: David Teigland <teigland@redhat.com>
