We check for the func with an OR condition, which means it always ends
up being false and we never match the task_work we want to cancel. In
the unexpected case that we do exit with that pending, we can trigger
a hang waiting for a worker to exit, but it was never created. syzbot
reports that as such:
INFO: task syz-executor687:8514 blocked for more than 143 seconds.
Not tainted 5.14.0-syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor687 state:D stack:27296 pid: 8514 ppid: 8479 flags:0x00024004
Call Trace:
context_switch kernel/sched/core.c:4940 [inline]
__schedule+0x940/0x26f0 kernel/sched/core.c:6287
schedule+0xd3/0x270 kernel/sched/core.c:6366
schedule_timeout+0x1db/0x2a0 kernel/time/timer.c:1857
do_wait_for_common kernel/sched/completion.c:85 [inline]
__wait_for_common kernel/sched/completion.c:106 [inline]
wait_for_common kernel/sched/completion.c:117 [inline]
wait_for_completion+0x176/0x280 kernel/sched/completion.c:138
io_wq_exit_workers fs/io-wq.c:1162 [inline]
io_wq_put_and_exit+0x40c/0xc70 fs/io-wq.c:1197
io_uring_clean_tctx fs/io_uring.c:9607 [inline]
io_uring_cancel_generic+0x5fe/0x740 fs/io_uring.c:9687
io_uring_files_cancel include/linux/io_uring.h:16 [inline]
do_exit+0x265/0x2a30 kernel/exit.c:780
do_group_exit+0x125/0x310 kernel/exit.c:922
get_signal+0x47f/0x2160 kernel/signal.c:2868
arch_do_signal_or_restart+0x2a9/0x1c40 arch/x86/kernel/signal.c:865
handle_signal_work kernel/entry/common.c:148 [inline]
exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
exit_to_user_mode_prepare+0x17d/0x290 kernel/entry/common.c:209
__syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:302
do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x445cd9
RSP: 002b:00007fc657f4b308 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: 0000000000000001 RBX: 00000000004cb448 RCX: 0000000000445cd9
RDX: 00000000000f4240 RSI: 0000000000000081 RDI: 00000000004cb44c
RBP: 00000000004cb440 R08: 000000000000000e R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000049b154
R13: 0000000000000003 R14: 00007fc657f4b400 R15: 0000000000022000
While in there, also decrement accr->nr_workers. This isn't strictly
needed as we're exiting, but let's make sure the accounting matches up.
Fixes: 3146cba99a ("io-wq: make worker creation resilient against signals")
Reported-by: syzbot+f62d3e0a4ea4f38f5326@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
WARNING: CPU: 0 PID: 10392 at fs/io_uring.c:1151 req_ref_put_and_test
fs/io_uring.c:1151 [inline]
WARNING: CPU: 0 PID: 10392 at fs/io_uring.c:1151 req_ref_put_and_test
fs/io_uring.c:1146 [inline]
WARNING: CPU: 0 PID: 10392 at fs/io_uring.c:1151
io_req_complete_post+0xf5b/0x1190 fs/io_uring.c:1794
Modules linked in:
Call Trace:
tctx_task_work+0x1e5/0x570 fs/io_uring.c:2158
task_work_run+0xe0/0x1a0 kernel/task_work.c:164
tracehook_notify_signal include/linux/tracehook.h:212 [inline]
handle_signal_work kernel/entry/common.c:146 [inline]
exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
exit_to_user_mode_prepare+0x232/0x2a0 kernel/entry/common.c:209
__syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:302
do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x44/0xae
When io_wqe_enqueue() -> io_wqe_create_worker() fails, we can't just
call io_run_cancel() to clean up the request, it's already enqueued via
io_wqe_insert_work() and will be executed either by some other worker
during cancellation (e.g. in io_wq_put_and_exit()).
Reported-by: Hao Sun <sunhao.th@gmail.com>
Fixes: 3146cba99a ("io-wq: make worker creation resilient against signals")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/93b9de0fcf657affab0acfd675d4abcd273ee863.1631092071.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a task is queueing async work and also handling signals, then we can
run into the case where create_io_thread() is interrupted and returns
failure because of that. If this happens for creating the first worker
in a group, then that worker will never get created and we can hang the
ring.
If we do get a fork failure, retry from task_work. With signals we have
to be a bit careful as we cannot simply queue as task_work, as we'll
still have signals pending at that point. Punt over a normal workqueue
first and then create from task_work after that.
Lastly, ensure that we handle fatal worker creations. Worker creation
failures are normally not fatal, only if we fail to create one in an empty
worker group can we not make progress. Right now that is ignored, ensure
that we handle that and run cancel on the work item.
There are two paths that create new workers - one is the "existing worker
going to sleep", and the other is "no workers found for this work, create
one". The former is never fatal, as workers do exist in the group. Only
the latter needs to be carefully handled.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It makes the logic easier to follow if we just get rid of the fixed worker
flag, and simply ensure that we never exit the last worker in the group.
This also means that no particular worker is special.
Just track the last timeout state, and if we have hit it and no work
is pending, check if there are other workers. If yes, then we can exit
this one safely.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the application uses io_uring and also relies heavily on signals
for communication, that can cause io-wq workers to spuriously exit
just because the parent has a signal pending. Just ignore signals
unless they are fatal.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We've got a few issues that all boil down to the fact that we have one
list of pending work items, yet two different types of workers to
serve them. This causes some oddities around workers switching type and
even hashed work vs regular work on the same bounded list.
Just separate them out cleanly, similarly to how we already do
accounting of what is running. That provides a clean separation and
removes some corner cases that can cause stalls when handling IO
that is punted to io-wq.
Fixes: ecc53c48c1 ("io-wq: check max_worker limits if a worker transitions bound state")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need to set the stalled bit early, before we drop the lock for adding
us to the stall hash queue. If not, then we can race with new work being
queued between adding us to the stall hash and io_worker_handle_work()
marking us stalled.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous commit removed the IRQ safety of the worker and wqe locks,
but that left one spot of the hash wait lock now being done without
already having IRQs disabled.
Ensure that we use the right locking variant for the hashed waitqueue
lock.
Fixes: a9a4aa9fbf ("io-wq: wqe and worker locks no longer need to be IRQ safe")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The attempt to find and activate a free worker for new work is currently
combined with creating a new one if we don't find one, but that opens
io-wq up to a race where the worker that is found and activated can
put itself to sleep without knowing that it has been selected to perform
this new work.
Fix this by moving the activation into where we add the new work item,
then we can retain it within the wqe->lock scope and elimiate the race
with the worker itself checking inside the lock, but sleeping outside of
it.
Cc: stable@vger.kernel.org
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When new work is added, io_wqe_enqueue() checks if we need to wake or
create a new worker. But that check is done outside the lock that
otherwise synchronizes us with a worker going to sleep, so we can end
up in the following situation:
CPU0 CPU1
lock
insert work
unlock
atomic_read(nr_running) != 0
lock
atomic_dec(nr_running)
no wakeup needed
Hold the wqe lock around the "need to wakeup" check. Then we can also get
rid of the temporary work_flags variable, as we know the work will remain
valid as long as we hold the lock.
Cc: stable@vger.kernel.org
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring no longer queues async work off completion handlers that run in
hard or soft interrupt context, and that use case was the only reason that
io-wq had to use IRQ safe locks for wqe and worker locks.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For the two places where new workers are created, we diligently check if
we are allowed to create a new worker. If we're currently at the limit
of how many workers of a given type we can have, then we don't create
any new ones.
If you have a mixed workload with various types of bound and unbounded
work, then it can happen that a worker finishes one type of work and
is then transitioned to the other type. For this case, we don't check
if we are actually allowed to do so. This can cause io-wq to temporarily
exceed the allowed number of workers for a given type.
When retrieving work, check that the types match. If they don't, check
if we are allowed to transition to the other type. If not, then don't
handle the new work.
Cc: stable@vger.kernel.org
Reported-by: Johannes Lundberg <johalun0@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io-wq divides work into two categories:
1) Work that completes in a bounded time, like reading from a regular file
or a block device. This type of work is limited based on the size of
the SQ ring.
2) Work that may never complete, we call this unbounded work. The amount
of workers here is just limited by RLIMIT_NPROC.
For various uses cases, it's handy to have the kernel limit the maximum
amount of pending workers for both categories. Provide a way to do with
with a new IORING_REGISTER_IOWQ_MAX_WORKERS operation.
IORING_REGISTER_IOWQ_MAX_WORKERS takes an array of two integers and sets
the max worker count to what is being passed in for each category. The
old values are returned into that same array. If 0 is being passed in for
either category, it simply returns the current value.
The value is capped at RLIMIT_NPROC. This actually isn't that important
as it's more of a hint, if we're exceeding the value then our attempt
to fork a new worker will fail. This happens naturally already if more
than one node is in the system, as these values are per-node internally
for io-wq.
Reported-by: Johannes Lundberg <johalun0@gmail.com>
Link: https://github.com/axboe/liburing/issues/420
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't need to protect nr_running and worker_refs by wqe->lock, so
narrow the range of raw_spin_lock_irq - raw_spin_unlock_irq
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210810125554.99229-1-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Daniel reports that the v5.14-rc4-rt4 kernel throws a BUG when running
stress-ng:
| [ 90.202543] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:35
| [ 90.202549] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 2047, name: iou-wrk-2041
| [ 90.202555] CPU: 5 PID: 2047 Comm: iou-wrk-2041 Tainted: G W 5.14.0-rc4-rt4+ #89
| [ 90.202559] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
| [ 90.202561] Call Trace:
| [ 90.202577] dump_stack_lvl+0x34/0x44
| [ 90.202584] ___might_sleep.cold+0x87/0x94
| [ 90.202588] rt_spin_lock+0x19/0x70
| [ 90.202593] ___slab_alloc+0xcb/0x7d0
| [ 90.202598] ? newidle_balance.constprop.0+0xf5/0x3b0
| [ 90.202603] ? dequeue_entity+0xc3/0x290
| [ 90.202605] ? io_wqe_dec_running.isra.0+0x98/0xe0
| [ 90.202610] ? pick_next_task_fair+0xb9/0x330
| [ 90.202612] ? __schedule+0x670/0x1410
| [ 90.202615] ? io_wqe_dec_running.isra.0+0x98/0xe0
| [ 90.202618] kmem_cache_alloc_trace+0x79/0x1f0
| [ 90.202621] io_wqe_dec_running.isra.0+0x98/0xe0
| [ 90.202625] io_wq_worker_sleeping+0x37/0x50
| [ 90.202628] schedule+0x30/0xd0
| [ 90.202630] schedule_timeout+0x8f/0x1a0
| [ 90.202634] ? __bpf_trace_tick_stop+0x10/0x10
| [ 90.202637] io_wqe_worker+0xfd/0x320
| [ 90.202641] ? finish_task_switch.isra.0+0xd3/0x290
| [ 90.202644] ? io_worker_handle_work+0x670/0x670
| [ 90.202646] ? io_worker_handle_work+0x670/0x670
| [ 90.202649] ret_from_fork+0x22/0x30
which is due to the RT kernel not liking a GFP_ATOMIC allocation inside
a raw spinlock. Besides that not working on RT, doing any kind of
allocation from inside schedule() is kind of nasty and should be avoided
if at all possible.
This particular path happens when an io-wq worker goes to sleep, and we
need a new worker to handle pending work. We currently allocate a small
data item to hold the information we need to create a new worker, but we
can instead include this data in the io_worker struct itself and just
protect it with a single bit lock. We only really need one per worker
anyway, as we will have run pending work between to sleep cycles.
https://lore.kernel.org/lkml/20210804082418.fbibprcwtzyt5qax@beryllium.lan/
Reported-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Daniel Wagner <dwagner@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There may be cases like:
A B
spin_lock(wqe->lock)
nr_workers is 0
nr_workers++
spin_unlock(wqe->lock)
spin_lock(wqe->lock)
nr_wokers is 1
nr_workers++
spin_unlock(wqe->lock)
create_io_worker()
acct->worker is 1
create_io_worker()
acct->worker is 1
There should be one worker marked IO_WORKER_F_FIXED, but no one is.
Fix this by introduce a new agrument for create_io_worker() to indicate
if it is the first worker.
Fixes: 3d4e4face9 ("io-wq: fix no lock protection of acct->nr_worker")
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210808135434.68667-3-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The former patch to add check between nr_workers and max_workers has a
bug, which will cause unconditionally creating io-workers. That's
because the result of the check doesn't affect the call of
create_io_worker(), fix it by bringing in a boolean value for it.
Fixes: 21698274da ("io-wq: fix lack of acct->nr_workers < acct->max_workers judgement")
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210808135434.68667-2-haoxu@linux.alibaba.com
[axboe: drop hunk that isn't strictly needed]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There should be this judgement before we create an io-worker
Fixes: 685fe7feed ("io-wq: eliminate the need for a manager thread")
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is an acct->nr_worker visit without lock protection. Think about
the case: two callers call io_wqe_wake_worker(), one is the original
context and the other one is an io-worker(by calling
io_wqe_enqueue(wqe, linked)), on two cpus paralelly, this may cause
nr_worker to be larger than max_worker.
Let's fix it by adding lock for it, and let's do nr_workers++ before
create_io_worker. There may be a edge cause that the first caller fails
to create an io-worker, but the second caller doesn't know it and then
quit creating io-worker as well:
say nr_worker = max_worker - 1
cpu 0 cpu 1
io_wqe_wake_worker() io_wqe_wake_worker()
nr_worker < max_worker
nr_worker++
create_io_worker() nr_worker == max_worker
failed return
return
But the chance of this case is very slim.
Fixes: 685fe7feed ("io-wq: eliminate the need for a manager thread")
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
[axboe: fix unconditional create_io_worker() call]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nadav correctly reports that we have a race between a worker exiting,
and new work being queued. This can lead to work being queued behind
an existing worker that could be sleeping on an event before it can
run to completion, and hence introducing potential big latency gaps
if we hit this race condition:
cpu0 cpu1
---- ----
io_wqe_worker()
schedule_timeout()
// timed out
io_wqe_enqueue()
io_wqe_wake_worker()
// work_flags & IO_WQ_WORK_CONCURRENT
io_wqe_activate_free_worker()
io_worker_exit()
Fix this by having the exiting worker go through the normal decrement
of a running worker, which will spawn a new one if needed.
The free worker activation is modified to only return success if we
were able to find a sleeping worker - if not, we keep looking through
the list. If we fail, we create a new worker as per usual.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/io-uring/BFF746C0-FEDE-4646-A253-3021C57C26C9@gmail.com/
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Tested-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Catch an illegal case to queue async from an unrelated task that got
the ring fd passed to it. This should not be possible to hit, but
better be proactive and catch it explicitly. io-wq is extended to
check for early IO_WQ_WORK_CANCEL being set on a work item as well,
so it can run the request through the normal cancelation path.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io-wq defaults to per-node masks for IO workers. This works fine by
default, but isn't particularly handy for workloads that prefer more
specific affinities, for either performance or isolation reasons.
This adds IORING_REGISTER_IOWQ_AFF that allows the user to pass in a CPU
mask that is then applied to IO thread workers, and an
IORING_UNREGISTER_IOWQ_AFF that simply resets the masks back to the
default of per-node.
Note that no care is given to existing IO threads, they will need to go
through a reschedule before the affinity is correct if they are already
running or sleeping.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for allowing user specific CPU masks for IO thread
creation, switch to using a mask embedded in the per-node wqe
structure.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
mm related header files are not needed for io-wq module.
remove them for a small clean-up.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Olivier Langlois <olivier@trillion01.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The variable ret is being initialized with a value that is never read, the
assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210615143424.60449-1-colin.king@canonical.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
BUG: KASAN: use-after-free in __wake_up_common+0x637/0x650
Read of size 8 at addr ffff8880304250d8 by task iou-wrk-28796/28802
Call Trace:
__dump_stack [inline]
dump_stack+0x141/0x1d7
print_address_description.constprop.0.cold+0x5b/0x2c6
__kasan_report [inline]
kasan_report.cold+0x7c/0xd8
__wake_up_common+0x637/0x650
__wake_up_common_lock+0xd0/0x130
io_worker_handle_work+0x9dd/0x1790
io_wqe_worker+0xb2a/0xd40
ret_from_fork+0x1f/0x30
Allocated by task 28798:
kzalloc_node [inline]
io_wq_create+0x3c4/0xdd0
io_init_wq_offload [inline]
io_uring_alloc_task_context+0x1bf/0x6b0
__io_uring_add_task_file+0x29a/0x3c0
io_uring_add_task_file [inline]
io_uring_install_fd [inline]
io_uring_create [inline]
io_uring_setup+0x209a/0x2bd0
do_syscall_64+0x3a/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 28798:
kfree+0x106/0x2c0
io_wq_destroy+0x182/0x380
io_wq_put [inline]
io_wq_put_and_exit+0x7a/0xa0
io_uring_clean_tctx [inline]
__io_uring_cancel+0x428/0x530
io_uring_files_cancel
do_exit+0x299/0x2a60
do_group_exit+0x125/0x310
get_signal+0x47f/0x2150
arch_do_signal_or_restart+0x2a8/0x1eb0
handle_signal_work[inline]
exit_to_user_mode_loop [inline]
exit_to_user_mode_prepare+0x171/0x280
__syscall_exit_to_user_mode_work [inline]
syscall_exit_to_user_mode+0x19/0x60
do_syscall_64+0x47/0xb0
entry_SYSCALL_64_after_hwframe
There are the following scenarios, hash waitqueue is shared by
io-wq1 and io-wq2. (note: wqe is worker)
io-wq1:worker2 | locks bit1
io-wq2:worker1 | waits bit1
io-wq1:worker3 | waits bit1
io-wq1:worker2 | completes all wqe bit1 work items
io-wq1:worker2 | drop bit1, exit
io-wq2:worker1 | locks bit1
io-wq1:worker3 | can not locks bit1, waits bit1 and exit
io-wq1 | exit and free io-wq1
io-wq2:worker1 | drops bit1
io-wq1:worker3 | be waked up, even though wqe is freed
After all iou-wrk belonging to io-wq1 have exited, remove wqe
form hash waitqueue, it is guaranteed that there will be no more
wqe belonging to io-wq1 in the hash waitqueue.
Reported-by: syzbot+6cb11ade52aa17095297@syzkaller.appspotmail.com
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Link: https://lore.kernel.org/r/20210526050826.30500-1-qiang.zhang@windriver.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is an old problem with io-wq cancellation where requests should be
killed and are in io-wq but are not discoverable, e.g. in @next_hashed
or @linked vars of io_worker_handle_work(). It adds some unreliability
to individual request canellation, but also may potentially get
__io_uring_cancel() stuck. For instance:
1) An __io_uring_cancel()'s cancellation round have not found any
request but there are some as desribed.
2) __io_uring_cancel() goes to sleep
3) Then workers wake up and try to execute those hidden requests
that happen to be unbound.
As we already cancel all requests of io-wq there, set IO_WQ_BIT_EXIT
in advance, so preventing 3) from executing unbound requests. The
workers will initially break looping because of getting a signal as they
are threads of the dying/exec()'ing user task.
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/abfcf8c54cb9e8f7bfbad7e9a0cc5433cc70bdc2.1621781238.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous commit removed the need for this, but overlooked that we no
longer use it at all. Get rid of it.
Fixes: 685fe7feed ("io-wq: eliminate the need for a manager thread")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Do not include private headers and do not frob in internals.
On top of that, while the previous code restores the affinity, it
doesn't ensure the task actually moves there if it was running,
leading to the fun situation that it can be observed running outside
of its allowed mask for potentially significant time.
Use the proper API instead.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/YG7QkiUzlEbW85TU@hirez.programming.kicks-ass.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With using task_work_cancel(), we're potentially canceling task_work
that isn't related to this specific io_wq. Use the newly added
task_work_cancel_match() to ensure that we only remove and cancel work
items that are specific to this io_wq.
Fixes: 685fe7feed ("io-wq: eliminate the need for a manager thread")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io-wq relies on a manager thread to create/fork new workers, as needed.
But there's really no strong need for it anymore. We have the following
cases that fork a new worker:
1) Work queue. This is done from the task itself always, and it's trivial
to create a worker off that path, if needed.
2) All workers have gone to sleep, and we have more work. This is called
off the sched out path. For this case, use a task_work items to queue
a fork-worker operation.
3) Hashed work completion. Don't think we need to do anything off this
case. If need be, it could just use approach 2 as well.
Part of this change is incrementing the running worker count before the
fork, to avoid cases where we observe we need a worker and then queue
creation of one. Then new work comes in, we fork a new one. That last
queue operation should have waited for the previous worker to come up,
it's quite possible we don't even need it. Hence move the worker running
from before we fork it off to more efficiently handle that case.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Extract a helper for io_work_get_acct() and io_wqe_get_acct() to avoid
duplication.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
WARNING: CPU: 5 PID: 227 at fs/io_uring.c:8578 io_ring_exit_work+0xe6/0x470
RIP: 0010:io_ring_exit_work+0xe6/0x470
Call Trace:
process_one_work+0x206/0x400
worker_thread+0x4a/0x3d0
kthread+0x129/0x170
ret_from_fork+0x22/0x30
INFO: task lfs-openat:2359 blocked for more than 245 seconds.
task:lfs-openat state:D stack: 0 pid: 2359 ppid: 1 flags:0x00000004
Call Trace:
...
wait_for_completion+0x8b/0xf0
io_wq_destroy_manager+0x24/0x60
io_wq_put_and_exit+0x18/0x30
io_uring_clean_tctx+0x76/0xa0
__io_uring_files_cancel+0x1b9/0x2e0
do_exit+0xc0/0xb40
...
Even after io-wq destroy has been issued io-wq worker threads will
continue executing all left work items as usual, and may hang waiting
for I/O that won't ever complete (aka unbounded).
[<0>] pipe_read+0x306/0x450
[<0>] io_iter_do_read+0x1e/0x40
[<0>] io_read+0xd5/0x330
[<0>] io_issue_sqe+0xd21/0x18a0
[<0>] io_wq_submit_work+0x6c/0x140
[<0>] io_worker_handle_work+0x17d/0x400
[<0>] io_wqe_worker+0x2c0/0x330
[<0>] ret_from_fork+0x22/0x30
Cancel all unbounded I/O instead of executing them. This changes the
user visible behaviour, but that's inevitable as io-wq is not per task.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/cd4b543154154cba055cf86f351441c2174d7f71.1617842918.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
task_pid may be large enough to not fit into the left space of
TASK_COMM_LEN-sized buffers and overflow in sprintf. We not so care
about uniqueness, so replace it with safer snprintf().
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1702c6145d7e1c46fbc382f28334c02e1a3d3994.1617267273.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We go through various hoops to disallow signals for the IO threads, but
there's really no reason why we cannot just allow them. The IO threads
never return to userspace like a normal thread, and hence don't go through
normal signal processing. Instead, just check for a pending signal as part
of the work loop, and call get_signal() to handle it for us if anything
is pending.
With that, we can support receiving signals, including special ones like
SIGSTOP.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus correctly points out that this is both unnecessary and generates
much worse code on some archs as going from current to thread_info is
actually backwards - and obviously just wasteful, since the thread_info
is what we care about.
Since io_uring only operates on current for these operations, just use
test_thread_flag() instead. For io-wq, we can further simplify and use
tracehook_notify_signal() to handle the TIF_NOTIFY_SIGNAL work and clear
the flag. The latter isn't an actual bug right now, but it may very well
be in the future if we place other work items under TIF_NOTIFY_SIGNAL.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/io-uring/CAHk-=wgYhNck33YHKZ14mFB5MzTTk8gqXHcfj=RWTAXKwgQJgg@mail.gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mark the current task as running if we need to run task_work from the
io-wq threads as part of work handling. If that is the case, then return
as such so that the caller can appropriately loop back and reset if it
was part of a going-to-sleep flush.
Fixes: 3bfe610669 ("io-wq: fork worker threads from original task")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the freezer using the proper signaling to notify us of when it's
time to freeze a thread, we can re-enable normal freezer usage for the
IO threads. Ensure that SQPOLL, io-wq, and the io-wq manager call
try_to_freeze() appropriately, and remove the default setting of
PF_NOFREEZE from create_io_thread().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The io-wq threads were already marked as no-freeze, but the manager was
not. On resume, we perpetually have signal_pending() being true, and
hence the manager will loop and spin 100% of the time.
Just mark the tasks created by create_io_thread() as PF_NOFREEZE by
default, and remove any knowledge of it in io-wq and io_uring.
Reported-by: Kevin Locke <kevin@kevinlocke.name>
Tested-by: Kevin Locke <kevin@kevinlocke.name>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
do_work such as io_wq_submit_work that cancel the work may leave a ref of
req as 1 if we have links. Fix it by call io_run_cancel.
Fixes: 4fb6ac3262 ("io-wq: improve manager/worker handling over exec")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Link: https://lore.kernel.org/r/20210309030410.3294078-1-yangerkun@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a simple warning making sure that nobody tries to create a new
manager while we're under IO_WQ_BIT_EXIT. That can potentially happen
due to racy work submission after final put.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
