[why]
BIOS's integration info table not following the original order
which is phy instance is ext_displaypath's array index.
[how]
Move them to follow the original order.
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Originally, PMFW said min FCLK is 300Mhz, but min DCFCLK can be increased
to 400Mhz because min FCLK is now 600Mhz so FCLK >= 1.5 * DCFCLK hardware
requirement will still be satisfied. Increasing min DCFCLK addresses
underflow issues (underflow occurs when phantom pipe is turned on for some
Sub-Viewport configs).
[how]
Increasing DCFCLK by raising the min_dcfclk_mhz
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sohaib Nadeem <sohaib.nadeem@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Revert commit 885c71ad79
("drm/amd/display: initialize all the dpm level's stutter latency")
Because it causes some regression
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GFX 9.4.3, for a given KFD node, fetch the correct drm device from
XCP manager when checking for cgroup permissions.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This instruction has no functional difference to S_ENDPGM
but allows performance counters to track save events correctly.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Laurent Morichetti <laurent.morichetti@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Partial migration to system memory should use migrate.addr, not
prange->start as virtual address to allocate system memory page.
Fixes: a546a27684 ("drm/amdkfd: Use partial migrations/mapping for GPU/CPU page faults in SVM")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Xiaogang Chen <Xiaogang.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Disallow families other than NFPROTO_{IPV4,IPV6,INET}.
- Disallow layer 4 protocol with no ports, since destination port is a
mandatory attribute for this object.
Fixes: 857b46027d ("netfilter: nft_ct: add ct expectations support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Module reference is bumped for each user, this should not ever happen.
But BUG_ON check should use rcu_access_pointer() instead.
If this ever happens, do WARN_ON_ONCE() instead of BUG_ON() and
consolidate pointer check under the rcu read side lock section.
Fixes: fab4085f4e ("netfilter: log: nf_log_packet() as real unified interface")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The patch "netfilter: ipset: fix race condition between swap/destroy
and kernel side add/del/test", commit 28628fa9 fixes a race condition.
But the synchronize_rcu() added to the swap function unnecessarily slows
it down: it can safely be moved to destroy and use call_rcu() instead.
Eric Dumazet pointed out that simply calling the destroy functions as
rcu callback does not work: sets with timeout use garbage collectors
which need cancelling at destroy which can wait. Therefore the destroy
functions are split into two: cancelling garbage collectors safely at
executing the command received by netlink and moving the remaining
part only into the rcu callback.
Link: https://lore.kernel.org/lkml/C0829B10-EAA6-4809-874E-E1E9C05A8D84@automattic.com/
Fixes: 28628fa952 ("netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test")
Reported-by: Ale Crismani <ale.crismani@automattic.com>
Reported-by: David Wang <00107082@163.com>
Tested-by: David Wang <00107082@163.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The annotation says in sctp_new(): "If it is a shutdown ack OOTB packet, we
expect a return shutdown complete, otherwise an ABORT Sec 8.4 (5) and (8)".
However, it does not check SCTP_CID_SHUTDOWN_ACK before setting vtag[REPLY]
in the conntrack entry(ct).
Because of that, if the ct in Router disappears for some reason in [1]
with the packet sequence like below:
Client > Server: sctp (1) [INIT] [init tag: 3201533963]
Server > Client: sctp (1) [INIT ACK] [init tag: 972498433]
Client > Server: sctp (1) [COOKIE ECHO]
Server > Client: sctp (1) [COOKIE ACK]
Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057809]
Server > Client: sctp (1) [SACK] [cum ack 3075057809]
Server > Client: sctp (1) [HB REQ]
(the ct in Router disappears somehow) <-------- [1]
Client > Server: sctp (1) [HB ACK]
Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057810]
Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057810]
Client > Server: sctp (1) [HB REQ]
Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057810]
Client > Server: sctp (1) [HB REQ]
Client > Server: sctp (1) [ABORT]
when processing HB ACK packet in Router it calls sctp_new() to initialize
the new ct with vtag[REPLY] set to HB_ACK packet's vtag.
Later when sending DATA from Client, all the SACKs from Server will get
dropped in Router, as the SACK packet's vtag does not match vtag[REPLY]
in the ct. The worst thing is the vtag in this ct will never get fixed
by the upcoming packets from Server.
This patch fixes it by checking SCTP_CID_SHUTDOWN_ACK before setting
vtag[REPLY] in the ct in sctp_new() as the annotation says. With this
fix, it will leave vtag[REPLY] in ct to 0 in the case above, and the
next HB REQ/ACK from Server is able to fix the vtag as its value is 0
in nf_conntrack_sctp_packet().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In (e)poll mode, threads often depend on I/O events to determine when
data is ready for consumption. Within binder, a thread may initiate a
command via BINDER_WRITE_READ without a read buffer and then make use
of epoll_wait() or similar to consume any responses afterwards.
It is then crucial that epoll threads are signaled via wakeup when they
queue their own work. Otherwise, they risk waiting indefinitely for an
event leaving their work unhandled. What is worse, subsequent commands
won't trigger a wakeup either as the thread has pending work.
Fixes: 457b9a6f09 ("Staging: android: add binder driver")
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Martijn Coenen <maco@android.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Steven Moreland <smoreland@google.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240131215347.1808751-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bail out on using the tunnel dst template from other than netdev family.
Add the infrastructure to check for the family in objects.
Fixes: af308b94a2 ("netfilter: nf_tables: add tunnel support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
commit c7aab4f170 ("netfilter: nf_conntrack_tcp: re-init for syn packets
only") introduces a bug where SYNs in ORIGINAL direction on reused 5-tuple
result in incorrect window scale negotiation. This commit merged the SYN
re-initialization and simultaneous open or SYN retransmits cases. Merging
this block added the logic in tcp_init_sender() that performed window scale
negotiation to the retransmitted syn case. Previously. this would only
result in updating the sender's scale and flags. After the merge the
additional logic results in improperly clearing the scale in ORIGINAL
direction before any packets in the REPLY direction are received. This
results in packets incorrectly being marked invalid for being
out-of-window.
This can be reproduced with the following trace:
Packet Sequence:
> Flags [S], seq 1687765604, win 62727, options [.. wscale 7], length 0
> Flags [S], seq 1944817196, win 62727, options [.. wscale 7], length 0
In order to fix the issue, only evaluate window negotiation for packets
in the REPLY direction. This was tested with simultaneous open, fast
open, and the above reproduction.
Fixes: c7aab4f170 ("netfilter: nf_conntrack_tcp: re-init for syn packets only")
Signed-off-by: Ryan Schaefer <ryanschf@amazon.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch is to eliminate interrupt warning below:
"[drm] Fence fallback timer expired on ring sdma0.0".
An early vm pt clearing job is sent to SDMA ahead of interrupt enabled.
And re-locating the drm client creation following after drm_dev_register
looks like a more proper flow.
v2: wrap the drm client creation
Fixes: 1819200166 ("drm/amdkfd: Export DMABufs from KFD using GEM handles")
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The eventfs_find_events() code tries to walk up the tree to find the
event directory that a dentry belongs to, in order to then find the
eventfs inode that is associated with that event directory.
However, it uses an odd combination of walking the dentry parent,
looking up the eventfs inode associated with that, and then looking up
the dentry from there. Repeat.
But the code shouldn't have back-pointers to dentries in the first
place, and it should just walk the dentry parenthood chain directly.
Similarly, 'set_top_events_ownership()' looks up the dentry from the
eventfs inode, but the only reason it wants a dentry is to look up the
superblock in order to look up the root dentry.
But it already has the real filesystem inode, which has that same
superblock pointer. So just pass in the superblock pointer using the
information that's already there, instead of looking up extraneous data
that is irrelevant.
Link: https://lore.kernel.org/linux-trace-kernel/202401291043.e62e89dc-oliver.sang@intel.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240131185512.638645365@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: c1504e5102 ("eventfs: Implement eventfs dir creation functions")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The tracefs-specific fields in the inode were not initialized before the
inode was exposed to others through the dentry with 'd_instantiate()'.
Move the field initializations up to before the d_instantiate.
Link: https://lore.kernel.org/linux-trace-kernel/20240131185512.478449628@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 5790b1fb3d ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202401291043.e62e89dc-oliver.sang@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
eventfs uses the tracefs_inode and assumes that it's already initialized
to zero. That is, it doesn't set fields to zero (like ti->private) after
getting its tracefs_inode. This causes bugs due to stale values.
Just initialize the entire structure to zero on allocation so there isn't
any more surprises.
This is a partial fix to access to ti->private. The assignment still needs
to be made before the dentry is instantiated.
Link: https://lore.kernel.org/linux-trace-kernel/20240131185512.315825944@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 5790b1fb3d ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202401291043.e62e89dc-oliver.sang@intel.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The return type for ring_buffer_poll_wait() is __poll_t. This is behind
the scenes an unsigned where we can set event bits. In case of a
non-allocated CPU, we do return instead -EINVAL (0xffffffea). Lucky us,
this ends up setting few error bits (EPOLLERR | EPOLLHUP | EPOLLNVAL), so
user-space at least is aware something went wrong.
Nonetheless, this is an incorrect code. Replace that -EINVAL with a
proper EPOLLERR to clean that output. As this doesn't change the
behaviour, there's no need to treat this change as a bug fix.
Link: https://lore.kernel.org/linux-trace-kernel/20240131140955.3322792-1-vdonnefort@google.com
Cc: stable@vger.kernel.org
Fixes: 6721cb6002 ("ring-buffer: Do not poll non allocated cpu buffers")
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
syzbot has found a type mismatch between a USB pipe and the transfer
endpoint, which is triggered by the bcm5974 driver[1].
This driver expects the device to provide input interrupt endpoints and
if that is not the case, the driver registration should terminate.
Repros are available to reproduce this issue with a certain setup for
the dummy_hcd, leading to an interrupt/bulk mismatch which is caught in
the USB core after calling usb_submit_urb() with the following message:
"BOGUS urb xfer, pipe 1 != type 3"
Some other device drivers (like the appletouch driver bcm5974 is mainly
based on) provide some checking mechanism to make sure that an IN
interrupt endpoint is available. In this particular case the endpoint
addresses are provided by a config table, so the checking can be
targeted to the provided endpoints.
Add some basic checking to guarantee that the endpoints available match
the expected type for both the trackpad and button endpoints.
This issue was only found for the trackpad endpoint, but the checking
has been added to the button endpoint as well for the same reasons.
Given that there was never a check for the endpoint type, this bug has
been there since the first implementation of the driver (f89bd95c5c).
[1] https://syzkaller.appspot.com/bug?extid=348331f63b034f89b622
Fixes: f89bd95c5c ("Input: bcm5974 - add driver for Macbook Air and Pro Penryn touchpads")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reported-and-tested-by: syzbot+348331f63b034f89b622@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20231007-topic-bcm5974_bulk-v3-1-d0f38b9d2935@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
6 small fixes. 5 are obvious and in drivers the fifth is a core fix
to remove the host lock acquisition and release, caused by a dynamic
check of host_busy, in the error handling loop which has been reported
to cause lockups.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZbpNZCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishT7eAP9FMadh
NbJPTY/4NaPdrrGgLSKKY3AIO9+GIgMxHjCmFAD7BAGtwk4rCb4SsJ+UmpW6cycf
iX0UzETqFhXMSv5wkEc=
=m42w
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six small fixes. Five are obvious and in drivers. The last one is a
core fix to remove the host lock acquisition and release, caused by a
dynamic check of host_busy, in the error handling loop which has been
reported to cause lockups"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: storvsc: Fix ring buffer size calculation
scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler
scsi: MAINTAINERS: Update ibmvscsi_tgt maintainer
scsi: initio: Remove redundant variable 'rb'
scsi: virtio_scsi: Remove duplicate check if queue is broken
scsi: isci: Fix an error code problem in isci_io_request_build()
l2_tos_ttl_inherit.sh verifies the inheritance of tos and ttl
for GRETAP, VXLAN and GENEVE.
Before testing it checks if the required module is available
and if not skips the tests accordingly.
Currently only GRETAP and VXLAN are tested because the GENEVE
module is missing.
Fixes: b690842d12 ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Signed-off-by: Matthias May <matthias.may@westermo.com>
Link: https://lore.kernel.org/r/20240130101157.196006-1-matthias.may@westermo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The i2c host patches are now set to be merged into the following
repository:
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux.git
Cc: Wolfram Sang <wsa@kernel.org>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The PCI endpoint subsystem is evolving at a rate I cannot keep up with,
therefore I am standing down as a maintainer handing over to Manivannan
(currently reviewer for this code) and Krzysztof who are doing an excellent
job on the matter - they don't need my help any longer.
Link: https://lore.kernel.org/r/20240129165933.33428-1-lpieralisi@kernel.org
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Krzysztof Wilczyński <kw@linux.com>
A last minute revert in 6.7-final introduced a potential deadlock when
enabling ASPM during probe of Qualcomm PCIe controllers as reported by
lockdep:
============================================
WARNING: possible recursive locking detected
6.7.0 #40 Not tainted
--------------------------------------------
kworker/u16:5/90 is trying to acquire lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc
but task is already holding lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(pci_bus_sem);
lock(pci_bus_sem);
*** DEADLOCK ***
Call trace:
print_deadlock_bug+0x25c/0x348
__lock_acquire+0x10a4/0x2064
lock_acquire+0x1e8/0x318
down_read+0x60/0x184
pcie_aspm_pm_state_change+0x58/0xdc
pci_set_full_power_state+0xa8/0x114
pci_set_power_state+0xc4/0x120
qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom]
pci_walk_bus+0x64/0xbc
qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom]
The deadlock can easily be reproduced on machines like the Lenovo ThinkPad
X13s by adding a delay to increase the race window during asynchronous
probe where another thread can take a write lock.
Add a new pci_set_power_state_locked() and associated helper functions that
can be called with the PCI bus semaphore held to avoid taking the read lock
twice.
Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com
Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org
Fixes: f93e71aea6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: <stable@vger.kernel.org> # 6.7
Geert Uytterhoeven reported that commit 4e244c10ea ("kconfig: remove
unneeded symbol_empty variable") changed the default value of
CONFIG_LOG_CPU_MAX_BUF_SHIFT from 12 to 0.
As it turned out, this is an undefined behavior because sym_calc_value()
stopped setting the sym->curr.tri field for 'int', 'hex', and 'string'
symbols.
This commit restores the original behavior, where 'int', 'hex', 'string'
symbols are interpreted as false if used in boolean contexts.
CONFIG_LOG_CPU_MAX_BUF_SHIFT will default to 12 again, irrespective
of CONFIG_BASE_SMALL. Presumably, this is not the intended behavior,
as already reported [1], but this is another issue that should be
addressed by a separate patch.
[1]: https://lore.kernel.org/all/f6856be8-54b7-0fa0-1d17-39632bf29ada@oracle.com/
Fixes: 4e244c10ea ("kconfig: remove unneeded symbol_empty variable")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://lore.kernel.org/all/CAMuHMdWm6u1wX7efZQf=2XUAHascps76YQac6rdnQGhc8nop_Q@mail.gmail.com/
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
DMA buffers allocated from the CMA dma-buf heap get counted under
RssFile for processes that map them and trigger page faults. In
addition to the incorrect accounting reported to userspace, reclaim
behavior was influenced by the MM_FILEPAGES counter until linux 6.8, but
this memory is not reclaimable. [1] Change the CMA dma-buf heap to set
VM_PFNMAP on the VMA so MM does not poke at the memory managed by this
dma-buf heap, and use vmf_insert_pfn to correct the RSS accounting.
The system dma-buf heap does not suffer from this issue since
remap_pfn_range is used during the mmap of the buffer, which also sets
VM_PFNMAP on the VMA.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/mm/vmscan.c?id=fb46e22a9e3863e08aef8815df9f17d0f4b9aede
Fixes: b61614ec31 ("dma-buf: heaps: Add CMA heap to dmabuf heaps")
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240117181141.286383-1-tjmercier@google.com
The new installkernel application that is now included in systemd-udev
package allows installation although destination files are already present
in the boot directory of the kernel package, but is failing with the
implemented workaround for the old installkernel application from grubby
package.
For the new installkernel application, as Davide says:
<<The %post currently does a shuffling dance before calling installkernel.
This isn't actually necessary afaict, and the current implementation
ends up triggering downstream issues such as
https://github.com/systemd/systemd/issues/29568
This commit simplifies the logic to remove the shuffling. For reference,
the original logic was added in commit 3c9c7a14b627("rpm-pkg: add %post
section to create initramfs and grub hooks").>>
But we need to keep the old behavior as well, because the old installkernel
application from grubby package, does not allow this simplification and
we need to be backward compatible to avoid issues with the different
packages.
Mimic Fedora shipping process and store vmlinuz, config amd System.map
in the module directory instead of the boot directory. In this way, we will
avoid the commented problem for all the cases, because the new destination
files are not going to exist in the boot directory of the kernel package.
Replace installkernel tool with kernel-install tool, because the latter is
more complete.
Besides, after installkernel tool execution, check to complete if the
correct package files vmlinuz, System.map and config files are present
in /boot directory, and if necessary, copy manually for install operation.
In this way, take into account if files were not previously copied from
/usr/lib/kernel/install.d/* scripts and if the suitable files for the
requested package are present (it could be others if the rpm files were
replace with a new pacakge with the same release and a different build).
Tested with Fedora 38, Fedora 39, RHEL 9, Oracle Linux 9.3,
openSUSE Tumbleweed and openMandrive ROME, using dnf/zypper and rpm tools.
cc: stable@vger.kernel.org
Co-Developed-by: Davide Cavalca <dcavalca@meta.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This is needed for the future (post make-4.4.1) versions of gnu make.
Starting from https://git.savannah.gnu.org/cgit/make.git/commit/?id=07fcee35f058a876447c8a021f9eb1943f902534
gnu make won't allow conditionals to follow recipe prefix.
For example there is a tab followed by ifeq on line 324 in the root Makefile.
With the new make this conditional causes the following
$ make cpu.o
/home/dgoncharov/src/linux-kbuild/Makefile:2063: *** missing 'endif'. Stop.
make: *** [Makefile:240: __sub-make] Error 2
This patch replaces tabs followed by conditionals with 8 spaces.
See https://savannah.gnu.org/bugs/?64185 and
https://savannah.gnu.org/bugs/?64259 for details.
Signed-off-by: Dmitry Goncharov <dgoncharov@users.sf.net>
Reported-by: Martin Dorey <martin.dorey@hitachivantara.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Aiden Leong reported modpost fails to build on macOS since commit
16a473f60e ("modpost: inform compilers that fatal() never returns"):
scripts/mod/modpost.c:93:21: error: aliases are not supported on darwin
Nathan's research indicates that Darwin seems to support weak aliases
at least [1]. Although the situation might be improved in future Clang
versions, we can achieve a similar outcome without relying on it.
This commit makes fatal() a macro of error() + exit(1) in modpost.h, as
compilers recognize that exit() never returns.
[1]: https://github.com/llvm/llvm-project/issues/71001
Fixes: 16a473f60e ("modpost: inform compilers that fatal() never returns")
Reported-by: Aiden Leong <aiden.leong@aibsd.com>
Closes: https://lore.kernel.org/all/d9ac2960-6644-4a87-b5e4-4bfb6e0364a8@aibsd.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There currently exists two thinkpad headset jack fixups:
ALC285_FIXUP_THINKPAD_NO_BASS_SPK_HEADSET_JACK
ALC285_FIXUP_THINKPAD_HEADSET_JACK
The latter is applied to alc285 and alc287 thinkpads which contain
bass speakers.
However, the former was only being applied to alc285 thinkpads,
leaving non-bass alc287 thinkpads with no headset button controls.
This patch fixes that by adding ALC285_FIXUP_THINKPAD_NO_BASS_SPK_HEADSET_JACK
to the alc287 chains, allowing the detection of headset buttons.
Signed-off-by: José Relvas <josemonsantorelvas@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240131113407.34698-3-josemonsantorelvas@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When using hotplug and bringing up a 32-bit CPU, ask the firmware about the
BTLB information to set up the static (block) TLB entries.
For that write access to the static btlb_info struct is needed, but
since it is marked __ro_after_init the kernel segfaults with missing
write permissions.
Fix the crash by dropping the __ro_after_init annotation.
Fixes: e5ef93d02d ("parisc: BTLB: Initialize BTLB tables at CPU startup")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.6+
ASMedia have confirmed that all ASM106x parts currently listed in
ahci_pci_tbl[] suffer from the 43-bit DMA address limitation that we ran
into on the ASM1061, and therefore, we need to apply the quirk added by
commit 20730e9b27 ("ahci: add 43-bit DMA address quirk for ASMedia
ASM1061 controllers") to the other supported ASM106x parts as well.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-ide/ZbopwKZJAKQRA4Xv@x1-carbon/
Signed-off-by: Lennert Buytenhek <kernel@wantstofly.org>
[cassel: add link to ASMedia confirmation email]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Follow the docs at Documentation/bpf/kfuncs.rst:
- declare the function with `__bpf_kfunc`
- disables missing prototype warnings, which allows to remove them from
include/linux/hid-bpf.h
Removing the prototypes is not an issue because we currently have to
redeclare them when writing the BPF program. They will eventually be
generated by bpftool directly AFAIU.
Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-3-052520b1e5e6@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Turns out that I got my reference counts wrong and each successful
bus_find_device() actually calls get_device(), and we need to manually
call put_device().
Ensure each bus_find_device() gets a matching put_device() when releasing
the bpf programs and fix all the error paths.
Cc: <stable@vger.kernel.org>
Fixes: f5c27da4e3 ("HID: initial BPF implementation")
Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-2-052520b1e5e6@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
When the kfunc hid_bpf_attach_prog() is called, we called twice fdget():
one for fetching the type of the bpf program, and one for actually
attaching the program to the device.
The problem is that between those two calls, we have no guarantees that
the prog_fd is still the same file descriptor for the given program.
Solve this by calling bpf_prog_get() earlier, and use this to fetch the
program type.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/bpf/CAO-hwJJ8vh8JD3-P43L-_CLNmPx0hWj44aom0O838vfP4=_1CA@mail.gmail.com/T/#t
Cc: <stable@vger.kernel.org>
Fixes: f5c27da4e3 ("HID: initial BPF implementation")
Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-1-052520b1e5e6@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
- Fix infinite loops due to filling compressed_bvecs non-atomically;
- Remove unnecessary GFP_NOFS;
- Relax temporary buffer allocation for low-memory scenarios.
-----BEGIN PGP SIGNATURE-----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=Y2G4
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.8-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- fix an infinite loop issue of sub-page compressed data support found
with lengthy stress tests on a 64k-page arm64 VM
- optimize the temporary buffer allocation for low-memory scenarios,
which can reduce 20.21% on average under a heavy multi-app launch
benchmark workload
- get rid of unnecessary GFP_NOFS
* tag 'erofs-for-6.8-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: relaxed temporary buffers allocation on readahead
erofs: fix infinite loop due to a race of filling compressed_bvecs
erofs: get rid of unneeded GFP_NOFS
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-01-29 (e1000e, ixgbe)
This series contains updates to e1000e and ixgbe drivers.
Jake corrects values used for maximum frequency adjustment for e1000e.
Christophe Jaillet adjusts error handling path so that semaphore is
released on ixgbe.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ixgbe: Fix an error handling path in ixgbe_read_iosf_sb_reg_x550()
e1000e: correct maximum frequency adjustment values
====================
Link: https://lore.kernel.org/r/20240129185240.787397-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When port function state change is requested, and when the driver
does not support it, it refers to the hw address attribute instead
of state attribute. Seems like a copy paste error.
Fix it by referring to the port function state attribute.
Fixes: c0bea69d1c ("devlink: Validate port function request")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129191059.129030-1-parav@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The original idea of the delay_time check was to not apply multicast
snooping too early when an MLD querier appears. And to instead wait at
least for MLD reports to arrive before switching from flooding to group
based, MLD snooped forwarding, to avoid temporary packet loss.
However in a batman-adv mesh network it was noticed that after 248 days of
uptime 32bit MIPS based devices would start to signal that they had
stopped applying multicast snooping due to missing queriers - even though
they were the elected querier and still sending MLD queries themselves.
While time_is_before_jiffies() generally is safe against jiffies
wrap-arounds, like the code comments in jiffies.h explain, it won't
be able to track a difference larger than ULONG_MAX/2. With a 32bit
large jiffies and one jiffies tick every 10ms (CONFIG_HZ=100) on these MIPS
devices running OpenWrt this would result in a difference larger than
ULONG_MAX/2 after 248 (= 2^32/100/60/60/24/2) days and
time_is_before_jiffies() would then start to return false instead of
true. Leading to multicast snooping not being applied to multicast
packets anymore.
Fix this issue by using a proper timer_list object which won't have this
ULONG_MAX/2 difference limitation.
Fixes: b00589af3b ("bridge: disable snooping if there is no querier")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240127175033.9640-1-linus.luessing@c0d3.blue
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
One of the test cases in the test_bridge_backup_port.sh selftest relies
on a matchall classifier to drop unrelated traffic so that the Tx drop
counter on the VXLAN device will only be incremented as a result of
traffic generated by the test.
However, the configuration option for the matchall classifier is
missing from the configuration file which might explain the failures we
see in the netdev CI [1].
Fix by adding CONFIG_NET_CLS_MATCHALL to the configuration file.
[1]
# Backup nexthop ID - invalid IDs
# -------------------------------
[...]
# TEST: Forwarding out of vx0 [ OK ]
# TEST: No forwarding using backup nexthop ID [ OK ]
# TEST: Tx drop increased [FAIL]
# TEST: IPv6 address family nexthop as backup nexthop [ OK ]
# TEST: No forwarding out of swp1 [ OK ]
# TEST: Forwarding out of vx0 [ OK ]
# TEST: No forwarding using backup nexthop ID [ OK ]
# TEST: Tx drop increased [FAIL]
[...]
Fixes: b408453053 ("selftests: net: Add bridge backup port and backup nexthop ID test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240129123703.1857843-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When probing the open-dice driver with PROVE_LOCKING=y, lockdep
complains that the mutex in 'drvdata->lock' has a non-static key:
| INFO: trying to register non-static key.
| The code is fine but needs lockdep annotation, or maybe
| you didn't initialize this object before use?
| turning off the locking correctness validator.
Fix the problem by initialising the mutex memory with mutex_init()
instead of __MUTEX_INITIALIZER().
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Brazdil <dbrazdil@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240126152410.10148-1-will@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In remoteproc shutdown sequence, rpmsg_remove will get called which
would depopulate all the child nodes that have been created during
rpmsg_probe. This would result in cb_remove call for all the context
banks for the remoteproc. In cb_remove function, session 0 is
getting skipped which is not correct as session 0 will never become
available again. Add changes to mark session 0 also as invalid.
Fixes: f6f9279f2b ("misc: fastrpc: Add Qualcomm fastrpc basic driver model")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Link: https://lore.kernel.org/r/20240108114833.20480-1-quic_ekangupt@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This kunit fixes update for Linux 6.8-rc3 consists of NULL vs IS_ERR()
bug fixes, documentation update, MAINTAINERS file update to add
Rae Moar as a reviewer, and a fix to run test suites only after module
initialization completes.
-----BEGIN PGP SIGNATURE-----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=BWfz
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
"NULL vs IS_ERR() bug fixes, documentation update, MAINTAINERS file
update to add Rae Moar as a reviewer, and a fix to run test suites
only after module initialization completes"
* tag 'linux_kselftest-kunit-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: KUnit: Update the instructions on how to test static functions
kunit: run test suites only after module initialization completes
MAINTAINERS: kunit: Add Rae Moar as a reviewer
kunit: device: Fix a NULL vs IS_ERR() check in init()
kunit: Fix a NULL vs IS_ERR() bug
This kselftest fixes update for Linux 6.8-rc3 consists of three
fixes to livepatch, rseq, and seccomp tests.
-----BEGIN PGP SIGNATURE-----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=0a0Q
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Three fixes to livepatch, rseq, and seccomp tests"
* tag 'linux_kselftest-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftest/seccomp: Report each expectation we assert as a KTAP test
kselftest/seccomp: Use kselftest output functions for benchmark
selftests/livepatch: fix and refactor new dmesg message code
selftests/rseq: Do not skip !allowed_cpus for mm_cid
The Lenovo Legion Go is a handheld gaming system, similar to a Steam Deck.
It has a gamepad (including rear paddles), 3 gyroscopes, a trackpad,
volume buttons, a power button, and 2 LED ring lights.
The Legion Go firmware presents these controls as a USB hub with various
devices attached. In its default state, the gamepad is presented as an
Xbox controller connected to this hub. (By holding a combination of
buttons, it can be changed to use the older DirectInput API.)
This patch teaches the existing Xbox controller module `xpad` to bind to
the controller in the Legion Go, which enables support for the:
- directional pad,
- analog sticks (including clicks),
- X, Y, A, B,
- start and select (or menu and capture),
- shoulder buttons, and
- rumble.
The trackpad, touchscreen, volume controls, and power button are already
supported via existing kernel modules. Two of the face buttons, the
gyroscopes, rear paddles, and LEDs are not.
After this patch lands, the Legion Go will be mostly functional in Linux,
out-of-the-box. The various components of the USB hub can be synthesized
into a single logical controller (including the additional buttons) in
userspace with [Handheld Daemon](https://github.com/hhd-dev/hhd), which
makes the Go fully functional.
Signed-off-by: Brenton Simpson <appsforartists@google.com>
Link: https://lore.kernel.org/r/20240118183546.418064-1-appsforartists@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
For these hooks the true "neutral" value is -EOPNOTSUPP, which is
currently what is returned when no LSM provides this hook and what LSMs
return when there is no security context set on the socket. Correct the
value in <linux/lsm_hooks.h> and adjust the dispatch functions in
security/security.c to avoid issues when the BPF LSM is enabled.
Cc: stable@vger.kernel.org
Fixes: 98e828a065 ("security: Refactor declaration of LSM hooks")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
In an entirely unrelated discussion where I pointed out a stupid thinko
of mine, Rasmus piped up and noted that that obvious mistake already
existed elsewhere in the kernel tree.
An "error pointer" is the negative error value encoded as a pointer,
making the whole "return error or valid pointer" use-case simple and
straightforward. We use it all over the kernel.
But the key here is that errors are _negative_ error numbers, not the
horrid UNIX user-level model of "-1 and the value of 'errno'".
The Apple mailbox driver used the positive error values, and thus just
returned invalid normal pointers instead of actual errors.
Of course, the reason nobody ever noticed is that the errors presumably
never actually happen, so this is fixing a conceptual bug rather than an
actual one.
Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Link: https://lore.kernel.org/all/5c30afe0-f9fb-45d5-9333-dd914a1ea93a@prevas.dk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
