Commit Graph

19 Commits

Author SHA1 Message Date
Laurent Pinchart
6e54d8d252 sh-pfc: Move driver from drivers/sh/ to drivers/pinctrl/
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25 09:24:25 +09:00
Paul Mundt
afae021abe sh: pfc: Shuffle PFC support core.
This follows the intc/clk changes and shuffles the PFC support code under
its own directory. This will facilitate better code sharing, and allow us
to trim down the exported interface by quite a margin.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-07-10 11:49:30 +09:00
Paul Mundt
b16b2a262c sh: pfc: Make gpio chip support optional where possible.
This implements some Kconfig knobs for ensuring that the PFC gpio chip
can be disabled or built as a module in the cases where it's optional, or
forcibly enabled in cases where it's not.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-06-20 18:17:56 +09:00
Paul Mundt
b3c185a761 sh: pfc: Split out gpio chip support.
This implements a bit of rework for the PFC code, making the core itself
slightly more pluggable and moving out the gpio chip handling completely.

The API is preserved in such a way that platforms that depend on it for
early configuration are still able to do so, while making it possible to
migrate to alternate interfaces going forward.

This is the first step of chainsawing necessary to support the pinctrl
API, with the eventual goal being able to decouple pin function state
from the gpio API while retaining gpio chip tie-in for gpio pin functions
only, relying on the pinctrl/pinmux API for non-gpio function demux.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-06-20 17:29:04 +09:00
Guennadi Liakhovetski
d3442b2bb7 sh: also without PM_RUNTIME pm_runtime.o must be built
When CONFIG_PM_RUNTIME is off, drivers/sh/pm_runtime.o still has to be
built on sh platforms, because then it provides means to statically
switch on device PM clocks.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-12 12:25:51 +09:00
Paul Mundt
62d3ba8bba sh: Kill off remaining private runtime PM bits.
This kills of the now unused runtime PM stub in favour of the generic
one.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-18 16:05:52 +09:00
Guennadi Liakhovetski
7fa4632db8 sh: sh7723: use runtime PM implementation, common with arm/mach-shmobile
Switch sh7723 to a runtime PM implementation, common with ARM-based
sh-mobile platforms.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-18 04:12:29 +09:00
Guennadi Liakhovetski
6a06d5bf26 sh: sh7722: use runtime PM implementation, common with arm/mach-shmobile
Switch sh7722 to a runtime PM implementation, common with ARM-based
sh-mobile platforms.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-18 04:12:28 +09:00
Guennadi Liakhovetski
8cc88a55b0 sh: sh7724: use runtime PM implementation, common with arm/mach-shmobile
Switch sh7724 to a runtime PM implementation, common with ARM-based
sh-mobile platforms.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-18 04:12:28 +09:00
Paul Mundt
750a7eee73 drivers: sh: Generalize runtime PM platform stub.
The runtime PM platform support stub in use by ARM-based SH/R-Mobile
platforms contains nothing that's specifically ARM-related and instead of
wholly generic to anything using the clock framework.

The recent runtime PM changes interact rather badly with the lazy
disabling of clocks late in the boot process through the clock framework,
leading to situations where the runtime suspend/resume paths are entered
without a clock being actively driven due to having been lazily gated
off.

In order to correct this we can trivially tie in the aforementioned stub
as a general fallback for all SH platforms that don't presently have
their own runtime PM implementations (the corner case being SH-based
SH-Mobile platforms, which have their own stub through the hwblk API --
which in turn has bitrotted and will be subsequently adapted to use the
same stub as everyone else), regardless of whether the platforms choose
to define power domains of their own or not.

This fixes up regressions for clock framework users who also build in
runtime PM support without any specific power domains of their own, which
was previously causing the serial console to be lost when warring with
lazy clock disabling.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11 15:41:50 +09:00
Paul Mundt
de9186c257 sh: clkfwk: Shuffle around to match the intc split up.
This shuffles the clock framework code around to a drivers/sh/clk subdir,
to follow the intc split up. This will make it easier to subsequently
break things out as well as plug in different helpers for non-CPG users.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-18 21:32:58 +09:00
Paul Mundt
2be6bb0c79 sh: intc: Split up the INTC code.
This splits up the sh intc core in to something more vaguely resembling
a subsystem. Most of the functionality was alread fairly well
compartmentalized, and there were only a handful of interdependencies
that needed to be resolved in the process.

This also serves as future-proofing for the genirq and sparseirq rework,
which will make some of the split out functionality wholly generic,
allowing things to be killed off in place with minimal migration pain.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-05 22:10:30 +09:00
Magnus Damm
e47bb515c5 ARM: mach-shmobile: Use shared clock framework
Teach SH-Mobile ARM how to make use of the shared SH clock
framework. This commit is one atomic switch that dumps the
local hackery and instead links in the shared clock framework
code in drivers/sh. A few local functions are kept in clock.c.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-20 12:05:45 +09:00
Magnus Damm
fa676ca394 sh: move sh clock-cpg.c contents to drivers/sh/clk-cpg.c
Move the CPG helpers to drivers/sh/clk-cpg.c V2.

This to allow SH-Mobile ARM to share the code with
SH. All functions except the legacy CPG stuff is moved.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-13 17:39:22 +09:00
Magnus Damm
8b5ee113e1 sh: move sh clock.c contents to drivers/sh/clk.
This patch is V2 of the SH clock framework move from
arch/sh/kernel/cpu/clock.c to drivers/sh/clk.c. All
code except the following functions are moved:
clk_init(), clk_get() and clk_put().

The init function is still kept in clock.c since it
depends on the SH-specific machvec implementation.

The symbols clk_get() and clk_put() already exist in
the common ARM clkdev code, those symbols are left in
the SH tree to avoid duplicating them for SH-Mobile ARM.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-13 17:39:14 +09:00
Magnus Damm
fae4339919 sh: Break out SuperH PFC code
This file breaks out the SuperH PFC code from
arch/sh/kernel/gpio.c + arch/sh/include/asm/gpio.h
to drivers/sh/pfc.c + include/linux/sh_pfc.h.

Similar to the INTC stuff. The non-SuperH specific
file location makes it possible to share the code
between multiple architectures.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30 12:02:53 +09:00
Paul Mundt
bbfbd8b151 sh: Move the shared INTC code out to drivers/sh/
The INTC code will be re-used across different architectures, so move
this out to drivers/sh/ and include/linux/sh_intc.h respectively.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-01 16:13:54 +09:00
Adrian McMenamin
17be2d2b1c sh: Add maple bus support for the SEGA Dreamcast.
The Maple bus is SEGA's proprietary serial bus for peripherals
(keyboard, mouse, controller etc). The bus is capable of some
(limited) hotplugging and operates at up to 2 M/bits.

Drivers of one sort or another existed/exist for 2.4 and a rudimentary
port, which didn't support the 2.6 device driver model was also in
existence.

This driver - for the bus logic itself and for the keyboard (other
drivers will follow) are based on the code and concepts of those old
drivers but have lots of completely rewritten parts.

I have the maple bus code as a built in now as that seems the sane and
rational way to handle something like that - you either want the bus
or you don't.

Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 15:55:55 +09:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00