HW GEN1 and GEN2 have different min WQ sizes but they are
currently set to the same value.
Use a gen specific attribute min_hw_wq_size and extend ABI to
pass it to user-space.
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230725155525.1081-3-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently the attribute cap.max_send_wr and cap.max_recv_wr
sent from user-space during create QP are the provider computed
SQ/RQ depth as opposed to raw values passed from application.
This inhibits computation of an accurate value for max_send_wr
and max_recv_wr for this QP in the kernel which matches the value
returned in user create QP. Also these capabilities needs to be
reported from the driver in query QP.
Add support by extending the ABI to allow the raw cap.max_send_wr and
cap.max_recv_wr to be passed from user-space, while keeping compatibility
for the older scheme.
The internal HW depth and shift needed for the WQs needs to be computed
now for both kernel and user-mode QPs. Add new helpers to assist with this:
irdma_uk_calc_depth_shift_sq, irdma_uk_calc_depth_shift_rq and
irdma_uk_calc_depth_shift_wq.
Consolidate all the user mode QP setup into a new function
irdma_setup_umode_qp which keeps it with its counterpart
irdma_setup_kmode_qp.
Signed-off-by: Youvaraj Sagar <youvaraj.sagar@intel.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230725155525.1081-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Update the alloc_page uapi functionality for handling the
mapping of doorbell pacing shared page and bar address.
Link: https://lore.kernel.org/r/1689742977-9128-6-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Introduce driver specific uapi functionalites. Added a alloc_page
functionality for user library to allocate specific pages. Currently added
support for allocating write combine pages for push functinality. This
interface shall be extended for other page allocations.
Allocate a WC page using the uapi hook for enabling the low latency push
in Gen P5 adapters for small packets. This is supported only for the user
space QPs.
Link: https://lore.kernel.org/r/1686679943-17117-8-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add rdma write capability that is propagated from the device to rdma-core.
Enable MR creation with remote write permissions according to this device
capability.
Link: https://lore.kernel.org/r/20230404154313.35194-1-ynachum@amazon.com
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add resize_cq verb support for user space CQs. Resize operation for
kernel CQs are not supported now.
Driver should free the current CQ only after user library polls
for all the completions and switch to new CQ. So after the resize_cq
is returned from the driver, user library polls for existing completions
and store it as temporary data. Once library reaps all completions in the
current CQ, it invokes the ibv_cmd_poll_cq to inform the driver about
the resize_cq completion. Adding a check for user CQs in driver's
poll_cq and complete the resize operation for user CQs.
Updating uverbs_cmd_mask with poll_cq to support this.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1678868215-23626-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add feature bit to existing device caps field. EFA supports data polling
of 128 bytes blocks.
The flag indicates that the NIC guarentees that a 128 byte aligned block
is written in order, ie that observing the last 8 bits of the block mean
the prior 127 bytes are also written.
It is useful for "last data polling" acceleration techniques.
Link: https://lore.kernel.org/r/20230219081328.10419-1-mrgolin@amazon.com
Reviewed-by: Yehuda Yitschak <yehuday@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Acked-by: Gal Pressman <gal.pressman@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Enable the CQEIE field and configure the CQEIS field of QPC. And add
compatibility handling.
Link: https://lore.kernel.org/r/20221224102201.3114536-4-xuhaoyue1@hisilicon.com
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The rq inline makes some changes as follows, Firstly, it is only used in
user space. Secondly, it should notify hardware in QP RTR status. Thirdly,
Add compatibility processing between different user space and kernel
space.
Link: https://lore.kernel.org/r/20221224102201.3114536-3-xuhaoyue1@hisilicon.com
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This commit extends the rxe user ABI to support the flush
operation defined in IBA A19.4.1. These changes are
backward compatible with the existing rxe user ABI.
The user API request a flush by filling this structure.
Link: https://lore.kernel.org/r/20221206130201.30986-4-lizhijian@fujitsu.com
Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This commit extends the RDMA user ABI to support the flush
operation defined in IBA A19.4.1. These changes are
backward compatible with the existing RDMA user ABI.
Link: https://lore.kernel.org/r/20221206130201.30986-2-lizhijian@fujitsu.com
Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The user usually configures the number of sge through the max_send_sge
parameter when creating qp, and configures the maximum size of inline data
that can be sent through max_inline_data. Inline uses sge to fill data to
send. Expect the following:
1) When the sge space cannot hold inline data, the sge space needs to be
expanded to accommodate all inline data
2) When the sge space is enough to accommodate inline data, the upper
limit of inline data can be increased so that users can send larger
inline data
Currently case one is not implemented. When the inline data is larger than
the sge space, an error of insufficient sge space occurs. This part of
the code needs to be reimplemented according to the expected rules. The
calculation method of sge num is modified to take the maximum value of
max_send_sge and the sge for max_inline_data to solve this problem.
Fixes: 05201e01be ("RDMA/hns: Refactor process of setting extended sge")
Fixes: 30b707886a ("RDMA/hns: Support inline data in extented sge space for RC")
Link: https://lore.kernel.org/r/20221108133847.2304539-3-xuhaoyue1@hisilicon.com
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a RDMA VF driver for Microsoft Azure Network Adapter (MANA).
Co-developed-by: Ajay Sharma <sharmaajay@microsoft.com>
Signed-off-by: Ajay Sharma <sharmaajay@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1667502990-2559-13-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In include/uapi/rdma/rdma_user_rxe.h there are redundant copies of num_sge
in the rxe_send_wr, rxe_recv_wqe, and rxe_dma_info. Only the ones in
rxe_dma_info are actually used by the rxe kernel driver.
The userspace would set these values, but the kernel never read them.
This change has no affect on the current ABI and new or old versions of
rdma-core operate correctly with new or old versions of the kernel rxe
driver.
Link: https://lore.kernel.org/r/20220913222716.18335-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This is modeled after the similar EFA enablement in commit
66f4817b57 ("RDMA/efa: Add support for dmabuf memory regions").
Like EFA there is no support for revocation so we simply call the
ib_umem_dmabuf_get_pinned() to obtain a umem instead of the normal
ib_umem_get(). Everything else stays the same.
Link: https://lore.kernel.org/r/3-v1-bd147097458e+ede-umem_dmabuf_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a parameter for create CQ admin command to set source address on
receive completion descriptors. Report capability for this feature
through query device verb.
Link: https://lore.kernel.org/r/20220818140449.414-1-mrgolin@amazon.com
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
According to the ib spec:
If the CI supports the Base Memory Management Extensions defined in this
specification, the L_Key format must consist of:
24 bit index in the most significant bits of the R_Key, and
8 bit key in the least significant bits of the R_Key
Through a successful Allocate L_Key verb invocation, the CI must let the
consumer own the key portion of the returned R_Key
Therefore, when creating a mkey using DEVX, the consumer is allowed to
change the key part. The kernel should compare only the index part of a
R_Key to determine equality with another R_Key.
Adding capability in order not to break backward compatibility.
Fixes: 534fd7aac5 ("IB/mlx5: Manage indirection mkey upon DEVX flow for ODP")
Link: https://lore.kernel.org/r/3d669aacea85a3a15c3b3b953b3eaba3f80ef9be.1659255945.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This PR includes a new RDMA driver for Alibaba Cloud hardware
- Bug fixes and small features for irdma, hns, siw, qedr, hfi1, mlx5
- General spelling/grammer fixes
- rdma cm can follow changes in neighbours for control packets
- Significant amounts of rxe fixes and spec compliance changes
- Use the modern NAPI API
- Use the bitmap API instead of open coding
- Performance improvements for rtrs
- Add the ERDMA driver for Alibaba cloud
- Fix a use after free bug in SRP
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCYuwAuAAKCRCFwuHvBreF
YcRDAQC41YJNs7xve7r62/E6M+o/AXiwXa+m8rGRvcP3mdilNAEAhdom6HskenMZ
/sopeBWF78M9plLvNzWkwukaqIwrXgM=
=abuq
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This cycle we got a new RDMA driver "ERDMA" for the Alibaba cloud
environment. Otherwise the changes are dominated by rxe fixes.
There is another RDMA driver on the list that might get merged next
cycle, 'MANA' for the Azure cloud environment.
Summary:
- Bug fixes and small features for irdma, hns, siw, qedr, hfi1, mlx5
- General spelling/grammer fixes
- rdma cm can follow changes in neighbours for control packets
- Significant amounts of rxe fixes and spec compliance changes
- Use the modern NAPI API
- Use the bitmap API instead of open coding
- Performance improvements for rtrs
- Add the ERDMA driver for Alibaba cloud
- Fix a use after free bug in SRP"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
RDMA/ib_srpt: Unify checking rdma_cm_id condition in srpt_cm_req_recv()
RDMA/rxe: Fix error unwind in rxe_create_qp()
RDMA/mlx5: Add missing check for return value in get namespace flow
RDMA/rxe: Split qp state for requester and completer
RDMA/rxe: Generate error completion for error requester QP state
RDMA/rxe: Update wqe_index for each wqe error completion
RDMA/srpt: Fix a use-after-free
RDMA/srpt: Introduce a reference count in struct srpt_device
RDMA/srpt: Duplicate port name members
IB/qib: Fix repeated "in" within comments
RDMA/erdma: Add driver to kernel build environment
RDMA/erdma: Add the ABI definitions
RDMA/erdma: Add the erdma module
RDMA/erdma: Add connection management (CM) support
RDMA/erdma: Add verbs implementation
RDMA/erdma: Add verbs header file
RDMA/erdma: Add event queue implementation
RDMA/erdma: Add cmdq implementation
RDMA/erdma: Add main include file
RDMA/erdma: Add the hardware related definitions
...
Core
----
- Refactor the forward memory allocation to better cope with memory
pressure with many open sockets, moving from a per socket cache to
a per-CPU one
- Replace rwlocks with RCU for better fairness in ping, raw sockets
and IP multicast router.
- Network-side support for IO uring zero-copy send.
- A few skb drop reason improvements, including codegen the source file
with string mapping instead of using macro magic.
- Rename reference tracking helpers to a more consistent
netdev_* schema.
- Adapt u64_stats_t type to address load/store tearing issues.
- Refine debug helper usage to reduce the log noise caused by bots.
BPF
---
- Improve socket map performance, avoiding skb cloning on read
operation.
- Add support for 64 bits enum, to match types exposed by kernel.
- Introduce support for sleepable uprobes program.
- Introduce support for enum textual representation in libbpf.
- New helpers to implement synproxy with eBPF/XDP.
- Improve loop performances, inlining indirect calls when
possible.
- Removed all the deprecated libbpf APIs.
- Implement new eBPF-based LSM flavor.
- Add type match support, which allow accurate queries to the
eBPF used types.
- A few TCP congetsion control framework usability improvements.
- Add new infrastructure to manipulate CT entries via eBPF programs.
- Allow for livepatch (KLP) and BPF trampolines to attach to the same
kernel function.
Protocols
---------
- Introduce per network namespace lookup tables for unix sockets,
increasing scalability and reducing contention.
- Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.
- Add support to forciby close TIME_WAIT TCP sockets via user-space
tools.
- Significant performance improvement for the TLS 1.3 receive path,
both for zero-copy and not-zero-copy.
- Support for changing the initial MTPCP subflow priority/backup
status
- Introduce virtually contingus buffers for sockets over RDMA,
to cope better with memory pressure.
- Extend CAN ethtool support with timestamping capabilities
- Refactor CAN build infrastructure to allow building only the needed
features.
Driver API
----------
- Remove devlink mutex to allow parallel commands on multiple links.
- Add support for pause stats in distributed switch.
- Implement devlink helpers to query and flash line cards.
- New helper for phy mode to register conversion.
New hardware / drivers
----------------------
- Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.
- Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.
- Ethernet DSA driver for the Microchip LAN937x switch.
- Ethernet PHY driver for the Aquantia AQR113C EPHY.
- CAN driver for the OBD-II ELM327 interface.
- CAN driver for RZ/N1 SJA1000 CAN controller.
- Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.
Drivers
-------
- Intel Ethernet NICs:
- i40e: add support for vlan pruning
- i40e: add support for XDP framented packets
- ice: improved vlan offload support
- ice: add support for PPPoE offload
- Mellanox Ethernet (mlx5)
- refactor packet steering offload for performance and scalability
- extend support for TC offload
- refactor devlink code to clean-up the locking schema
- support stacked vlans for bridge offloads
- use TLS objects pool to improve connection rate
- Netronome Ethernet NICs (nfp):
- extend support for IPv6 fields mangling offload
- add support for vepa mode in HW bridge
- better support for virtio data path acceleration (VDPA)
- enable TSO by default
- Microsoft vNIC driver (mana)
- add support for XDP redirect
- Others Ethernet drivers:
- bonding: add per-port priority support
- microchip lan743x: extend phy support
- Fungible funeth: support UDP segmentation offload and XDP xmit
- Solarflare EF100: add support for virtual function representors
- MediaTek SoC: add XDP support
- Mellanox Ethernet/IB switch (mlxsw):
- dropped support for unreleased H/W (XM router).
- improved stats accuracy
- unified bridge model coversion improving scalability
(parts 1-6)
- support for PTP in Spectrum-2 asics
- Broadcom PHYs
- add PTP support for BCM54210E
- add support for the BCM53128 internal PHY
- Marvell Ethernet switches (prestera):
- implement support for multicast forwarding offload
- Embedded Ethernet switches:
- refactor OcteonTx MAC filter for better scalability
- improve TC H/W offload for the Felix driver
- refactor the Microchip ksz8 and ksz9477 drivers to share
the probe code (parts 1, 2), add support for phylink
mac configuration
- Other WiFi:
- Microchip wilc1000: diable WEP support and enable WPA3
- Atheros ath10k: encapsulation offload support
Old code removal:
- Neterion vxge ethernet driver: this is untouched since more than
10 years.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hxEG
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Paolo Abeni:
"Core:
- Refactor the forward memory allocation to better cope with memory
pressure with many open sockets, moving from a per socket cache to
a per-CPU one
- Replace rwlocks with RCU for better fairness in ping, raw sockets
and IP multicast router.
- Network-side support for IO uring zero-copy send.
- A few skb drop reason improvements, including codegen the source
file with string mapping instead of using macro magic.
- Rename reference tracking helpers to a more consistent netdev_*
schema.
- Adapt u64_stats_t type to address load/store tearing issues.
- Refine debug helper usage to reduce the log noise caused by bots.
BPF:
- Improve socket map performance, avoiding skb cloning on read
operation.
- Add support for 64 bits enum, to match types exposed by kernel.
- Introduce support for sleepable uprobes program.
- Introduce support for enum textual representation in libbpf.
- New helpers to implement synproxy with eBPF/XDP.
- Improve loop performances, inlining indirect calls when possible.
- Removed all the deprecated libbpf APIs.
- Implement new eBPF-based LSM flavor.
- Add type match support, which allow accurate queries to the eBPF
used types.
- A few TCP congetsion control framework usability improvements.
- Add new infrastructure to manipulate CT entries via eBPF programs.
- Allow for livepatch (KLP) and BPF trampolines to attach to the same
kernel function.
Protocols:
- Introduce per network namespace lookup tables for unix sockets,
increasing scalability and reducing contention.
- Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.
- Add support to forciby close TIME_WAIT TCP sockets via user-space
tools.
- Significant performance improvement for the TLS 1.3 receive path,
both for zero-copy and not-zero-copy.
- Support for changing the initial MTPCP subflow priority/backup
status
- Introduce virtually contingus buffers for sockets over RDMA, to
cope better with memory pressure.
- Extend CAN ethtool support with timestamping capabilities
- Refactor CAN build infrastructure to allow building only the needed
features.
Driver API:
- Remove devlink mutex to allow parallel commands on multiple links.
- Add support for pause stats in distributed switch.
- Implement devlink helpers to query and flash line cards.
- New helper for phy mode to register conversion.
New hardware / drivers:
- Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.
- Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.
- Ethernet DSA driver for the Microchip LAN937x switch.
- Ethernet PHY driver for the Aquantia AQR113C EPHY.
- CAN driver for the OBD-II ELM327 interface.
- CAN driver for RZ/N1 SJA1000 CAN controller.
- Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.
Drivers:
- Intel Ethernet NICs:
- i40e: add support for vlan pruning
- i40e: add support for XDP framented packets
- ice: improved vlan offload support
- ice: add support for PPPoE offload
- Mellanox Ethernet (mlx5)
- refactor packet steering offload for performance and scalability
- extend support for TC offload
- refactor devlink code to clean-up the locking schema
- support stacked vlans for bridge offloads
- use TLS objects pool to improve connection rate
- Netronome Ethernet NICs (nfp):
- extend support for IPv6 fields mangling offload
- add support for vepa mode in HW bridge
- better support for virtio data path acceleration (VDPA)
- enable TSO by default
- Microsoft vNIC driver (mana)
- add support for XDP redirect
- Others Ethernet drivers:
- bonding: add per-port priority support
- microchip lan743x: extend phy support
- Fungible funeth: support UDP segmentation offload and XDP xmit
- Solarflare EF100: add support for virtual function representors
- MediaTek SoC: add XDP support
- Mellanox Ethernet/IB switch (mlxsw):
- dropped support for unreleased H/W (XM router).
- improved stats accuracy
- unified bridge model coversion improving scalability (parts 1-6)
- support for PTP in Spectrum-2 asics
- Broadcom PHYs
- add PTP support for BCM54210E
- add support for the BCM53128 internal PHY
- Marvell Ethernet switches (prestera):
- implement support for multicast forwarding offload
- Embedded Ethernet switches:
- refactor OcteonTx MAC filter for better scalability
- improve TC H/W offload for the Felix driver
- refactor the Microchip ksz8 and ksz9477 drivers to share the
probe code (parts 1, 2), add support for phylink mac
configuration
- Other WiFi:
- Microchip wilc1000: diable WEP support and enable WPA3
- Atheros ath10k: encapsulation offload support
Old code removal:
- Neterion vxge ethernet driver: this is untouched since more than 10 years"
* tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits)
doc: sfp-phylink: Fix a broken reference
wireguard: selftests: support UML
wireguard: allowedips: don't corrupt stack when detecting overflow
wireguard: selftests: update config fragments
wireguard: ratelimiter: use hrtimer in selftest
net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ
net: usb: ax88179_178a: Bind only to vendor-specific interface
selftests: net: fix IOAM test skip return code
net: usb: make USB_RTL8153_ECM non user configurable
net: marvell: prestera: remove reduntant code
octeontx2-pf: Reduce minimum mtu size to 60
net: devlink: Fix missing mutex_unlock() call
net/tls: Remove redundant workqueue flush before destroy
net: txgbe: Fix an error handling path in txgbe_probe()
net: dsa: Fix spelling mistakes and cleanup code
Documentation: devlink: add add devlink-selftests to the table of contents
dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock
net: ionic: fix error check for vlan flags in ionic_set_nic_features()
net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr()
nfp: flower: add support for tunnel offload without key ID
...
Cheng Xu says
====================
This v14 patch set introduces the Elastic RDMA Adapter (ERDMA) driver,
which released in Apsara Conference 2021 by Alibaba. The PR of ERDMA
userspace provider has already been created [1].
ERDMA enables large-scale RDMA acceleration capability in Alibaba ECS
environment, initially offered in g7re instance. It can improve the
efficiency of large-scale distributed computing and communication
significantly and expand dynamically with the cluster scale of Alibaba
Cloud.
ERDMA is a RDMA networking adapter based on the Alibaba MOC hardware. It
works in the VPC network environment (overlay network), and uses iWarp
transport protocol. ERDMA supports reliable connection (RC). ERDMA also
supports both kernel space and user space verbs. Now we have already
supported HPC/AI applications with libfabric, NoF and some other internal
verbs libraries, such as xrdma, epsl, etc,.
For the ECS instance with RDMA enabled, our MOC hardware generates two
kinds of PCI devices: one for ERDMA, and one for the original net device
(virtio-net). They are separated PCI devices.
====================
* branch 'erdma':
RDMA/erdma: Add driver to kernel build environment
RDMA/erdma: Add the ABI definitions
RDMA/erdma: Add the erdma module
RDMA/erdma: Add connection management (CM) support
RDMA/erdma: Add verbs implementation
RDMA/erdma: Add verbs header file
RDMA/erdma: Add event queue implementation
RDMA/erdma: Add cmdq implementation
RDMA/erdma: Add main include file
RDMA/erdma: Add the hardware related definitions
RDMA: Add ERDMA to rdma_driver_id definition
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add erdma ABI definitions which will be shared between kernel and
userspace. This commit also fix compile issues reported by lkp.
Link: https://lore.kernel.org/r/20220727014927.76564-11-chengyou@linux.alibaba.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Expose a steering anchor per priority to allow users to re-inject
packets back into default NIC pipeline for additional processing.
MLX5_IB_METHOD_STEERING_ANCHOR_CREATE returns a flow table ID which
a user can use to re-inject packets at a specific priority.
A FTE (flow table entry) can be created and the flow table ID
used as a destination.
When a packet is taken into a RDMA-controlled steering domain (like
software steering) there may be a need to insert the packet back into
the default NIC pipeline. This exposes a flow table ID to the user that can
be used as a destination in a flow table entry.
With this new method priorities that are exposed to users via
MLX5_IB_METHOD_FLOW_MATCHER_CREATE can be reached from a non-zero UID.
As user-created flow tables (via RDMA DEVX) are created with a non-zero UID
thus it's impossible to point to a NIC core flow table (core driver flow tables
are created with UID value of zero) from userspace.
Create flow tables that are exposed to users with the shared UID, this
allows users to point to default NIC flow tables.
Steering loops are prevented at FW level as FW enforces that no flow
table at level X can point to a table at level lower than X.
Link: https://lore.kernel.org/all/20220703205407.110890-6-saeed@kernel.org/
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
This code was transformed with the help of Coccinelle:
(linux-5.19-rc2$ spatch --jobs $(getconf _NPROCESSORS_ONLN) --sp-file script.cocci --include-headers --dir . > output.patch)
@@
identifier S, member, array;
type T1, T2;
@@
struct S {
...
T1 member;
T2 array[
- 0
];
};
-fstrict-flex-arrays=3 is coming and we need to land these changes
to prevent issues like these in the short future:
../fs/minix/dir.c:337:3: warning: 'strcpy' will always overflow; destination buffer has size 0,
but the source string has length 2 (including NUL byte) [-Wfortify-source]
strcpy(de3->name, ".");
^
Since these are all [0] to [] changes, the risk to UAPI is nearly zero. If
this breaks anything, we can use a union with a new member name.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/78
Build-tested-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/62b675ec.wKX6AOZ6cbE71vtF%25lkp@intel.com/
Acked-by: Dan Williams <dan.j.williams@intel.com> # For ndctl.h
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Add support for allocate/deallocate and registering MR of the new type
of ICM area. Support exists only for devices that support sw_owner_v2.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Split out flags from ib_device::device_cap_flags that are only used
internally to the kernel into kernel_cap_flags that is not part of the
uapi. This limits the device_cap_flags to being the same bitmap that will
be copied to userspace.
This cleanly splits out the uverbs flags from the kernel flags to avoid
confusion in the flags bitmap.
Add some short comments describing which each of the kernel flags is
connected to. Remove unused kernel flags.
Link: https://lore.kernel.org/r/0-v2-22c19e565eef+139a-kern_caps_jgg@nvidia.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
1) Part of enum ib_device_cap_flags are used by ibv_query_device(3)
or ibv_query_device_ex(3), so we define them in
include/uapi/rdma/ib_user_verbs.h and only expose them to userspace.
2) Reformat enum ib_device_cap_flags by removing the indent before '='.
Link: https://lore.kernel.org/r/20220331032419.313904-2-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This enum is used by ibv_query_device_ex(3) so it should be defined
in include/uapi/rdma/ib_user_verbs.h.
Link: https://lore.kernel.org/r/20220331032419.313904-1-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Substantially all bug fixes and cleanups:
- Update drivers to use common helpers for GUIDs, pkeys, bitmaps,
memset_startat, and others
- General code cleanups from bots
- Simplify some of the rxe pool code in preparation for a larger rework
- Clean out old stuff from hns, including all support for hip06 devices
- Fix a bug where GID table entries could be missed if the table had holes
in it
- Rename paths and sessions in rtrs for better understandability
- Consolidate the roce source port selection code
- NDR speed support in mlx5
-----BEGIN PGP SIGNATURE-----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=EL3r
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Another small cycle. Mostly cleanups and bug fixes, quite a bit
assisted from bots. There are a few new syzkaller splats that haven't
been solved yet but they should get into the rcs in a few weeks, I
think.
Summary:
- Update drivers to use common helpers for GUIDs, pkeys, bitmaps,
memset_startat, and others
- General code cleanups from bots
- Simplify some of the rxe pool code in preparation for a larger
rework
- Clean out old stuff from hns, including all support for hip06
devices
- Fix a bug where GID table entries could be missed if the table had
holes in it
- Rename paths and sessions in rtrs for better understandability
- Consolidate the roce source port selection code
- NDR speed support in mlx5"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (83 commits)
RDMA/irdma: Remove the redundant return
RDMA/rxe: Use the standard method to produce udp source port
RDMA/irdma: Make the source udp port vary
RDMA/hns: Replace get_udp_sport with rdma_get_udp_sport
RDMA/core: Calculate UDP source port based on flow label or lqpn/rqpn
IB/qib: Fix typos
RDMA/rtrs-clt: Rename rtrs_clt to rtrs_clt_sess
RDMA/rtrs-srv: Rename rtrs_srv to rtrs_srv_sess
RDMA/rtrs-clt: Rename rtrs_clt_sess to rtrs_clt_path
RDMA/rtrs-srv: Rename rtrs_srv_sess to rtrs_srv_path
RDMA/rtrs: Rename rtrs_sess to rtrs_path
RDMA/hns: Modify the hop num of HIP09 EQ to 1
IB/iser: Align coding style across driver
IB/iser: Remove un-needed casting to/from void pointer
IB/iser: Don't suppress send completions
IB/iser: Rename ib_ret local variable
IB/iser: Fix RNR errors
IB/iser: Remove deprecated pi_guard module param
IB/mlx5: Expose NDR speed through MAD
RDMA/cxgb4: Set queue pair state when being queried
...
Add support for misc5 match parameter as per HW spec, this will allow
matching on tunnel_header fields.
Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
The current write wqe mechanism is to write to DDR first, and then notify
the hardware through doorbell to read the data. Direct wqe is a mechanism
to fill wqe directly into the hardware. In the case of light load, the wqe
will be filled into pcie bar space of the hardware, this will reduce one
memory access operation and therefore reduce the latency. SIMD
instructions allows cpu to write the 512 bits at one time to device
memory, thus it can be used for posting direct wqe.
Add direct wqe enable switch and address mapping.
Link: https://lore.kernel.org/r/20211207124901.42123-2-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A typical collection of patches this cycle, mostly fixing with a few new
features:
- Fixes from static tools. clang warnings, dead code, unused variable,
coccinelle sweeps, etc
- Driver bug fixes and minor improvements in rxe, bnxt_re, hfi1, mlx5,
irdma, qedr
- rtrs ULP bug fixes an improvments
- Additional counters for bnxt_re
- Support verbs CQ notifications in EFA
- Continued reworking and fixing of rxe
- netlink control to enable/disable optional device counters
- rxe now can use AH objects for its UD path, fixing various bugs in the
process
- Add DMABUF support to EFA
-----BEGIN PGP SIGNATURE-----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=CxD0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A typical collection of patches this cycle, mostly fixing with a few
new features:
- Fixes from static tools. clang warnings, dead code, unused
variable, coccinelle sweeps, etc
- Driver bug fixes and minor improvements in rxe, bnxt_re, hfi1,
mlx5, irdma, qedr
- rtrs ULP bug fixes an improvments
- Additional counters for bnxt_re
- Support verbs CQ notifications in EFA
- Continued reworking and fixing of rxe
- netlink control to enable/disable optional device counters
- rxe now can use AH objects for its UD path, fixing various bugs in
the process
- Add DMABUF support to EFA"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (103 commits)
RDMA/core: Require the driver to set the IOVA correctly during rereg_mr
RDMA/bnxt_re: Remove unsupported bnxt_re_modify_ah callback
RDMA/irdma: optimize rx path by removing unnecessary copy
RDMA/qed: Use helper function to set GUIDs
RDMA/hns: Use the core code to manage the fixed mmap entries
IB/opa_vnic: Rebranding of OPA VNIC driver to Cornelis Networks
IB/qib: Rebranding of qib driver to Cornelis Networks
IB/hfi1: Rebranding of hfi1 driver to Cornelis Networks
RDMA/bnxt_re: Use helper function to set GUIDs
RDMA/bnxt_re: Fix kernel panic when trying to access bnxt_re_stat_descs
RDMA/qedr: Fix NULL deref for query_qp on the GSI QP
RDMA/hns: Modify the value of MAX_LP_MSG_LEN to meet hardware compatibility
RDMA/hns: Fix initial arm_st of CQ
RDMA/rxe: Make rxe_type_info static const
RDMA/rxe: Use 'bitmap_zalloc()' when applicable
RDMA/rxe: Save a few bytes from struct rxe_pool
RDMA/irdma: Remove the unused variable local_qp
RDMA/core: Fix missed initialization of rdma_hw_stats::lock
RDMA/efa: Add support for dmabuf memory regions
RDMA/umem: Allow pinned dmabuf umem usage
...
Make changes to rdma_user_rxe.h to allow indexing AH objects, passing the
index in UD send WRs to the driver and returning the index to the rxe
provider.
Modify rxe_create_ah() to add an index to AH when created and if called
from a new user provider return it to user space. If called from an old
provider mark the AH as not having a useful index. Modify rxe_destroy_ah
to drop the index before deleting the object.
Link: https://lore.kernel.org/r/20211007204051.10086-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move the struct rxe_av av from struct rxe_send_wqe to struct rxe_send_wr
placing it in wr.ud at the same offset as it was previously. This has the
effect of increasing the size of struct rxe_send_wr while keeping the size
of struct rxe_send_wqe the same. This better reflects the use of this
field which is only used for UD sends. This change has no effect on ABI
compatibility so the modified rxe driver will operate with older versions
of rdma-core.
Link: https://lore.kernel.org/r/20211007204051.10086-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch adds the ability to get the name, index and status of all
counters for each link through RDMA netlink. This can be used for
user-space to get the current optional-counter mode.
Examples:
$ rdma statistic mode
link rocep8s0f0/1 optional-counters cc_rx_ce_pkts
$ rdma statistic mode supported
link rocep8s0f0/1 supported optional-counters cc_rx_ce_pkts,cc_rx_cnp_pkts,cc_tx_cnp_pkts
link rocep8s0f1/1 supported optional-counters cc_rx_ce_pkts,cc_rx_cnp_pkts,cc_tx_cnp_pkts
Link: https://lore.kernel.org/r/20211008122439.166063-8-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Neta Ostrovsky <netao@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch adds support for CQ notifications through the standard verbs
api.
In order to achieve that, a new event queue (EQ) object is introduced,
which is in charge of reporting completion events to the driver. On
driver load, EQs are allocated and their affinity is set to a single
cpu. When a user app creates a CQ with a completion channel, the
completion vector number is converted to a EQ number, which is in charge
of reporting the CQ events.
In addition, the CQ creation admin command now returns an offset for the
CQ doorbell, which is mapped to the userspace provider and is used to arm
the CQ when requested by the user.
The EQs use a single doorbell (located on the registers BAR), which
encodes the EQ number and arm as part of the doorbell value. The EQs are
polled by the driver on each new EQE, and arm it when the poll is
completed.
Link: https://lore.kernel.org/r/20211003105605.29222-1-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
From Maor Gottlieb
====================
Fix the use of nents and orig_nents in the sg table append helpers. The
nents should be used by the DMA layer to store the number of DMA mapped
sges, the orig_nents is the number of CPU sges.
Since the sg append logic doesn't always create a SGL with exactly
orig_nents entries store a total_nents as well to allow the table to be
properly free'd and reorganize the freeing logic to share across all the
use cases.
====================
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
* 'sg_nents':
RDMA: Use the sg_table directly and remove the opencoded version from umem
lib/scatterlist: Fix wrong update of orig_nents
lib/scatterlist: Provide a dedicated function to support table append
DCS is an offload to SW load balancing of DC initiator work requests.
A single DCI can be connected to only one target at the time and can't
start new connection until the previous work request is completed. This
limitation will cause to delay when the initiator process needs to
transfer data to multiple targets at the same time. The SW solution is to
use a process that handling and spreading the work request on many DCIs
according to destinations.
This feature is an offload to this process and coming to reduce the load
from the CPU and improve the performance.
Link: https://lore.kernel.org/r/491c2c2afdb5b07de7f03eab3f93cf0704549dbc.1624258894.git.leonro@nvidia.com
Reviewed-by: Meir Lichtinger <meirl@nvidia.com>
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Commit 48d6b3336a ("RDMA/irdma: Add ABI definitions") adds
./include/uapi/rdma/irdma-abi.h with an additional unneeded closing
bracket at the end of the SPDX-License-Identifier line.
Hence, ./scripts/spdxcheck.py complains:
include/uapi/rdma/irdma-abi.h: 1:77 Syntax error: )
Remove that closing bracket to make spdxcheck.py happy.
Fixes: 48d6b3336a ("RDMA/irdma: Add ABI definitions")
Link: https://lore.kernel.org/r/20210701104127.1877-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Aharon Landau says:
====================
In case device supports only real-time timestamp, the kernel will fail to
create QP despite rdma-core requested such timestamp type.
It is because device returns free-running timestamp, and the conversion
from free-running to real-time is performed in the user space.
This series fixes it, by returning real-time timestamp.
====================
* mlx5_realtime_ts:
RDMA/mlx5: Support real-time timestamp directly from the device
RDMA/mlx5: Refactor get_ts_format functions to simplify code
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, if the user asks for a real-time timestamp, the device will
return a free-running one, and the timestamp will be translated to
real-time in the user-space.
When the device supports only real-time timestamp and not free-running,
the creation of the QP will fail even though the user needs supported the
real-time one. To prevent this, we will return the real-time timestamp
directly from the device.
Link: https://lore.kernel.org/r/c6cfc8e6f038575c5c2de6505830f7e74e4de80d.1623829775.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring array fields.
Without a flexible array, this looks like an attempt to perform a memcpy()
read beyond the end of the packet->mad.data array:
drivers/infiniband/core/user_mad.c:
memcpy(packet->msg->mad, packet->mad.data, IB_MGMT_MAD_HDR);
Switch from [0] to [] to use the appropriately handled type for trailing
bytes.
Link: https://lore.kernel.org/r/20210616202615.1247242-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Changing ucontext ABI response structure to pass wqe_mode to user library.
A flag in comp_mask has been set to indicate presence of wqe_mode.
Moved wqe-mode ABI to uapi/rdma/bnxt_re-abi.h
Link: https://lore.kernel.org/r/20210616202817.1185276-1-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Shiraz Saleem says:
====================
Add Intel Ethernet Protocol Driver for RDMA (irdma)
The following patch series introduces a unified Intel Ethernet Protocol
Driver for RDMA (irdma) for the X722 iWARP device and a new E810 device
which supports iWARP and RoCEv2. The irdma module replaces the legacy
i40iw module for X722 and extends the ABI already defined for i40iw. It is
backward compatible with legacy X722 rdma-core provider (libi40iw).
X722 and E810 are PCI network devices that are RDMA capable. The RDMA
block of this parent device is represented via an auxiliary device
exported to 'irdma' using the core auxiliary bus infrastructure recently
added for 5.11 kernel. The parent PCI netdev drivers 'i40e' and 'ice'
register auxiliary RDMA devices with private data/ops encapsulated that
bind to auxiliary drivers registered in irdma module.
Currently, default is RoCEv2 for E810. Runtime support for protocol switch
to iWARP will be made available via devlink in a future patch.
====================
Link: https://lore.kernel.org/r/20210602205138.889-1-shiraz.saleem@intel.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
* branch 'irdma':
RDMA/irdma: Update MAINTAINERS file
RDMA/irdma: Add irdma Kconfig/Makefile and remove i40iw
RDMA/irdma: Add ABI definitions
RDMA/irdma: Add dynamic tracing for CM
RDMA/irdma: Add miscellaneous utility definitions
RDMA/irdma: Add user/kernel shared libraries
RDMA/irdma: Add RoCEv2 UD OP support
RDMA/irdma: Implement device supported verb APIs
RDMA/irdma: Add PBLE resource manager
RDMA/irdma: Add connection manager
RDMA/irdma: Add QoS definitions
RDMA/irdma: Add privileged UDA queue implementation
RDMA/irdma: Add HMC backing store setup functions
RDMA/irdma: Implement HW Admin Queue OPs
RDMA/irdma: Implement device initialization definitions
RDMA/irdma: Register auxiliary driver and implement private channel OPs
i40e: Register auxiliary devices to provide RDMA
i40e: Prep i40e header for aux bus conversion
ice: Register auxiliary device to provide RDMA
ice: Implement iidc operations
ice: Initialize RDMA support
iidc: Introduce iidc.h
i40e: Replace one-element array with flexible-array member
