Although not reproduced in practice, these two cases may be
considered by UBSAN as off-by-one errors. So fix them in the
same way as in commit a26a5107bc ("wifi: cfg80211: fix UBSAN
noise in cfg80211_wext_siwscan()").
Fixes: 807f8a8c30 ("cfg80211/nl80211: add support for scheduled scans")
Fixes: 5ba63533bb ("cfg80211: fix alignment problem in scan request")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20240909090806.1091956-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, during starting a radar detection, no link id information is
parsed and passed down. In order to support starting radar detection
during Multi Link Operation, it is required to pass link id as well.
Add changes to first parse and then pass link id in the start radar
detection path.
Additionally, update notification APIs to allow drivers/mac80211 to
pass the link ID.
However, everything is handled at link 0 only until all API's are ready to
handle it per link.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-6-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A few members related to DFS handling are currently under per wireless
device data structure. However, in order to support DFS with MLO, there is
a need to have them on a per-link manner.
Hence, as a preliminary step, move members cac_started, cac_start_time
and cac_time_ms to be on a per-link basis.
Since currently, link ID is not known at all places, use default value of
0 for now.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-5-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
rdev_end_cac trace event is linked with wiphy_netdev_evt event class.
There is no option to pass link ID currently to wiphy_netdev_evt class.
A subsequent change would pass link ID to rdev_end_cac event and hence
it can no longer derive the event class from wiphy_netdev_evt.
Therefore, unlink rdev_end_cac event from wiphy_netdev_evt and define it's
own independent trace event. Link ID would be passed in subsequent change.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-4-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Avoid overriding BSS information generated from MBSSID or direct source
with BSS information generated from per-STA profile source to avoid
losing actual signal strength and information elements such as RNR and
Basic ML elements.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://patch.msgid.link/20240904030917.3602369-4-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently signal of the BSS entry generated from the per-STA profile
indicated as zero, but userspace may consider it as high signal
strength since 0 dBm is a valid RSSI value.
To avoid this don't report the signal to userspace when the BSS entry
created from a per-STA profile.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://patch.msgid.link/20240904030917.3602369-3-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Define public enum with BSS source types in core.h. Upcoming patches
need this to store BSS source type in struct cfg80211_internal_bss.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://patch.msgid.link/20240904030917.3602369-2-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Replace rcu_dereference() with rcu_access_pointer() since we already
hold the lock and own the 'tmp' at this point. This is needed to avoid
suspicious rcu_dereference_check warnings in__cfg80211_bss_update error
paths.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://patch.msgid.link/20240904142021.3887360-1-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Looking at https://syzkaller.appspot.com/bug?extid=1a3986bbd3169c307819
and running reproducer with CONFIG_UBSAN_BOUNDS, I've noticed the
following:
[ T4985] UBSAN: array-index-out-of-bounds in net/wireless/scan.c:3479:25
[ T4985] index 164 is out of range for type 'struct ieee80211_channel *[]'
<...skipped...>
[ T4985] Call Trace:
[ T4985] <TASK>
[ T4985] dump_stack_lvl+0x1c2/0x2a0
[ T4985] ? __pfx_dump_stack_lvl+0x10/0x10
[ T4985] ? __pfx__printk+0x10/0x10
[ T4985] __ubsan_handle_out_of_bounds+0x127/0x150
[ T4985] cfg80211_wext_siwscan+0x11a4/0x1260
<...the rest is not too useful...>
Even if we do 'creq->n_channels = n_channels' before 'creq->ssids =
(void *)&creq->channels[n_channels]', UBSAN treats the latter as
off-by-one error. Fix this by using pointer arithmetic rather than
an expression with explicit array indexing and use convenient
'struct_size()' to simplify the math here and in 'kzalloc()' above.
Fixes: 5ba63533bb ("cfg80211: fix alignment problem in scan request")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20240905150400.126386-1-dmantipov@yandex.ru
[fix coding style for multi-line calculation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mwifiex has recently started to see active development which is good
news. rtw89 is also under active development and got several new
features. Otherwise not really anything out of ordinary.
We have one conflict in ath12k but that's easy to fix:
https://lore.kernel.org/all/20240808104348.6846e064@canb.auug.org.au/
Major changes:
mwifiex
* support for up to ten Authentication and Key Management (AKM) suites
* host MAC Sublayer Management Entity (MLME) client and AP mode support
* WPA-PSK-SHA256 AKM suite support
rtw88
* improve USB performance by aggregation
rtw89
* Wi-Fi 6 chip RTL8852BE-VT support
* WoWLAN net-detect support
* hardware encryption in unicast management frames support
* hardware rfkill support
ath12k
* DebugFS support for transmit DE stats
* Make ASPM support hardware-dependent
iwlwifi
* channel puncturing for US/CAN from UEFI
* bump FW API to 93 for BZ/SC devices
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmbYfCARHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt+Qwf/X9oQ4sf8jV6eOV7EhoWhIHnQadvo5YBZ
ulBm8In0QGjEOVWkI7kXGabKP5jhne2lVIyP1eFfP2/td/A2yDWIuEeBfDQD6f4K
aiUGAa1gs4ZtGKJBniw/ukflSqJlR99N2qBO5T/smDm3Nw/aC522SO7BoLTpoJDQ
SuW4atFHMShXYf/vIrAA2yB9ok2yw/QM+27M9qjj6D7zzqsQxDl9wKGW+2v8KiSa
rXXbfnwfaQP21CYv5xYbEPACSRSV5Dr0TNopivWYxmm9svjLzwFN2JM2fHPxBEDh
wP6Ojp+Z32c1VbQtclLrwIQdlZ5yhU5MEDlVg5VLym9F83hv+oXTbA==
=lgVx
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
pull-request: wireless-next-2024-09-04
here's a pull request to net-next tree, more info below. Please let me know if
there are any problems.
====================
Conflicts:
drivers/net/wireless/ath/ath12k/hw.c
38055789d1 ("wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850")
8be12629b4 ("wifi: ath12k: restore ASPM for supported hardwares only")
https://lore.kernel.org/87msldyj97.fsf@kernel.org
Link: https://patch.msgid.link/20240904153205.64C11C4CEC2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
"Interface can't change network namespaces" is rather an attribute,
not a feature, and it can't be changed via Ethtool.
Make it a "cold" private flag instead of a netdev_feature and free
one more bit.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When starting CAC in a mode other than AP mode, it return a
"WARNING: CPU: 0 PID: 63 at cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]"
caused by the chandef.chan being null at the end of CAC.
Solution: Ensure the channel definition is set for the different modes
when starting CAC to avoid getting a NULL 'chan' at the end of CAC.
Call Trace:
? show_regs.part.0+0x14/0x16
? __warn+0x67/0xc0
? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]
? report_bug+0xa7/0x130
? exc_overflow+0x30/0x30
? handle_bug+0x27/0x50
? exc_invalid_op+0x18/0x60
? handle_exception+0xf6/0xf6
? exc_overflow+0x30/0x30
? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]
? exc_overflow+0x30/0x30
? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]
? regulatory_propagate_dfs_state.cold+0x1b/0x4c [cfg80211]
? cfg80211_propagate_cac_done_wk+0x1a/0x30 [cfg80211]
? process_one_work+0x165/0x280
? worker_thread+0x120/0x3f0
? kthread+0xc2/0xf0
? process_one_work+0x280/0x280
? kthread_complete_and_exit+0x20/0x20
? ret_from_fork+0x19/0x24
Reported-by: Kretschmer Mathias <mathias.kretschmer@fit.fraunhofer.de>
Signed-off-by: Issam Hamdi <ih@simonwunderlich.de>
Link: https://patch.msgid.link/20240816142418.3381951-1-ih@simonwunderlich.de
[shorten subject, remove OCB, reorder cases to match previous list]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Let the kememdup_array() take care about multiplication and possible
overflows.
Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/20240822074743.1366561-1-yujiaoliang@vivo.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
According to RFC8325 4.3, Multimedia Streaming: AF31(011010, 26),
AF32(011100, 28), AF33(011110, 30) maps to User Priority = 4
and AC_VI (Video).
However, the original code remain the default three Most Significant
Bits (MSBs) of the DSCP, which makes AF3x map to User Priority = 3
and AC_BE (Best Effort).
Fixes: 6fdb8b8781 ("wifi: cfg80211: Update the default DSCP-to-UP mapping")
Signed-off-by: hhorace <hhoracehsu@gmail.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20240807082205.1369-1-hhoracehsu@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Now that functions in lib80211 handle "const struct lib80211_crypto_ops",
some structure can be constified as well.
Constifying these structures moves some data to a read-only section, so
increase overall security.
Before:
text data bss dec hex filename
7273 604 16 7893 1ed5 net/wireless/lib80211.o
After:
text data bss dec hex filename
7429 444 16 7889 1ed1 net/wireless/lib80211.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/0cc3741c15f2c502cc85bddda9d6582b5977c8f9.1722839425.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
lib80211_register_crypto_ops() and lib80211_unregister_crypto_ops() don't
modify their "struct lib80211_crypto_ops *ops" argument. So, it can be
declared as const.
Doing so, some adjustments are needed to also constify some date in
"struct lib80211_crypt_data", "struct lib80211_crypto_alg" and the
return value of lib80211_get_crypto_ops().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/c74085e02f33a11327582b19c9f51c3236e85ae2.1722839425.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Individual MLO links connection status is not copied to
EVENT_CONNECT_RESULT data while processing the connect response
information in cfg80211_connect_done(). Due to this failed links
are wrongly indicated with success status in EVENT_CONNECT_RESULT.
To fix this, copy the individual MLO links status to the
EVENT_CONNECT_RESULT data.
Fixes: 53ad07e982 ("wifi: cfg80211: support reporting failed links")
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20240724125327.3495874-1-quic_vjakkam@quicinc.com
[commit message editorial changes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The prerequisite for MLO support in cfg80211/mac80211 is that all the links
participating in MLO must be from the same wiphy/ieee80211_hw. To meet this
expectation, some drivers may need to group multiple discrete hardware each
acting as a link in MLO under single wiphy.
With this change, supported frequencies and interface combinations of each
individual radio are reported to user space. This allows user space to figure
out the limitations of what combination of channels can be used concurrently.
Even for non-MLO devices, this improves support for devices capable of
running on multiple channels at the same time.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/18a88f9ce82b1c9f7c12f1672430eaf2bb0be295.1720514221.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a key is requested by userspace, there's really no need
to include the key data, the sequence counter is really what
userspace needs in this case. The fact that it's included is
just a historic quirk.
Remove the key data.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240627104411.b6a4f097e4ea.I7e6cc976cb9e8a80ef25a3351330f313373b4578@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
e3f02f32a0 ("ionic: fix kernel panic due to multi-buffer handling")
d9c0420999 ("ionic: Mark error paths in the data path as unlikely")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Call the tracing function even if the cfg80211 callbacks
are not set. This would allow better understanding of
user space actions.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20240614093541.018cb816e176.I28f68740a6b42144346f5c175c7874b0a669a364@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
1e7962114c ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error")
165f87691a ("bnxt_en: add timestamping statistics support")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a user uses iw to connect to a network and we don't have any
information about the existing networks, cfg80211 will trigger a scan
internally even if the user didn't ask for a scan. This scan is
implemented by cfg80211_conn_scan(). This function called rdev_scan()
directly without honoring the WIPHY_FLAG_SPLIT_SCAN_6GHZ flag.
Use cfg80211_scan instead, this will split the scan if the low level
driver asked to.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605135233.33f03661476a.I7b5be20a55aafe012cd9ddb3b4ba2d46b256ace4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In NDP ranging, the number of NDP exchanges is not negotiated
and thus is not limited by the protocol. Remove the limit on
FTMs per burst for trigger based and non trigger based ranging.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605135233.916e228537d9.I5fe4c1cefa1c1328726e7615dd5a0d861c694381@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On 6 GHz (and also 5 GHz to some degree), only a specific set of center
frequencies should be used depending on the channel bandwidth. Verify
this is the case on 6 GHz. For 5 GHz, we are more accepting as there are
APs that got it wrong historically.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240602102200.876b10a2beda.I0d3d0daea4014e99654437ff6691378dbe452652@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a regulatory flag to allow VLP AP operation even on
channels otherwise marked NO_IR, which may be possible
in some regulatory domains/countries.
Note that this requires checking also when the beacon is
changed, since that may change the regulatory power type.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.63792ce19790.Ie2a02750d283b78fbf3c686b10565fb0388889e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are two functions exported now, with different settings,
refactor to just export a single function that take a struct
with different settings. This will make it easier to add more
parameters.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.d44c34dadfc2.I59b4403108e0dbf7fc6ae8f7522e1af520cffb1c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add cfg80211_get_6ghz_power_type() to parse the 6 GHz
power type from a given set of elements, which is now
only inside cfg80211_6ghz_power_type_valid().
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.84cdffd94085.I76f434ee12552e8be91273f3b2d776179eaa62f1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To later introduce an override for VLP APs being allowed despite
NO-IR flags, which is somewhat similar in construction to being
allowed to monitor on disabled channels, refactor the code that
checks channel flags to have not a 'monitor' argument but a set
of 'permitting' flags that permit the operation without checking
for 'prohibited' flags.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.3da28ded4a50.I90cffc633d0510293d511f60097dc75e719b55f0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It may be possible to monitor on disabled channels per the
can-monitor flag, but evidently I forgot to expose that out
to userspace. Fix that.
Fixes: a110a3b791 ("wifi: cfg80211: optionally support monitor on disabled channels")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.9a2c19a51e53.I50fa1b1a18b70f63a5095131ac23dc2e71f3d426@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently NL80211_RATE_INFO_HE_RU_ALLOC_2x996 is not handled in
cfg80211_calculate_bitrate_he(), leading to below warning:
kernel: invalid HE MCS: bw:6, ru:6
kernel: WARNING: CPU: 0 PID: 2312 at net/wireless/util.c:1501 cfg80211_calculate_bitrate_he+0x22b/0x270 [cfg80211]
Fix it by handling 2x996 RU allocation in the same way as 160 MHz bandwidth.
Fixes: c4cbaf7973 ("cfg80211: Add support for HE")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://msgid.link/20240606020653.33205-3-quic_bqiang@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jiazi Li reported that they occasionally see hash table duplicates
as evidenced by the WARN_ON() in rb_insert_bss() in this code. It
isn't clear how that happens, nor have I been able to reproduce it,
but if it does happen, the kernel crashes later, when it tries to
unhash the entry that's now not hashed.
Try to make this situation more survivable by removing the BSS from
the list(s) as well, that way it's fully leaked here (as had been
the intent in the hash insert error path), and no longer reachable
through the list(s) so it shouldn't be unhashed again later.
Link: https://lore.kernel.org/r/20231026013528.GA24122@Jiazi.Li
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240607181726.36835-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In nl80211, we always set the ssids of a scan request to
NULL when n_ssids==0 (passive scan). Drivers have relied
on this behaviour in the past, so we fixed it in 6 GHz
scan requests as well, and added a warning so we'd have
assurance the API would always be called that way.
syzbot found that wext doesn't ensure that, so we reach
the check and trigger the warning. Fix the wext code to
set the ssids pointer to NULL when there are none.
Reported-by: syzbot+cd6135193ba6bb9ad158@syzkaller.appspotmail.com
Fixes: f7a8b10bfd ("wifi: cfg80211: fix 6 GHz scan request building")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have two
conflicts this time:
CONFLICT (content): Merge conflict in net/mac80211/cfg.c
CONFLICT (content): Merge conflict in drivers/net/wireless/microchip/wilc1000/netdev.c
Here are Stephen's resolutions for them:
https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au/https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au/
Major changes:
cfg80211/mac80211
* parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers
wilc1000
* read MAC address during probe to make it visible to user space
iwlwifi
* bump FW API to 91 for BZ/SC devices
* report 64-bit radiotap timestamp
* Enable P2P low latency by default
* handle Transmit Power Envelope (TPE) advertised by AP
* start using guard()
rtlwifi
* RTL8192DU support
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmZi07URHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZu3/QgAo7jyKgvpwMaNIVRLyfYCo0r3Q9wb7QPd
QeRNsftYxlWpPTJ4+Y95aZupy91Ay+RaEQXbbtl7PMIiyQrs7wb4V4Iqzedkws3t
DZsR5BitH+1BIGY0Omo0fiSB5HlWEwZGUj6inqlgKHpBtdIVTANSMjuwkdoMAV5y
ZU57axIGToySvDbRlhJQW833Nnh4KnaseA+TtyfXSaBVerzbshkjBr0d9pMBMiH9
irMQW5CW+7fbxp3OCNsKxX4eG6MFGmm/uP1hFmeYQi2qzUE4SddHMeV4I6oNKOrH
vFB+ZVmYvOjJUYsNhlCUe6Vy+EKwvmfiDWwE1egelEkgozCixJXAAQ==
=QT4C
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.11
The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have
two conflicts this time:
net/mac80211/cfg.c
https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au
drivers/net/wireless/microchip/wilc1000/netdev.c
https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au
Major changes:
cfg80211/mac80211
* parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers
wilc1000
* read MAC address during probe to make it visible to user space
iwlwifi
* bump FW API to 91 for BZ/SC devices
* report 64-bit radiotap timestamp
* enable P2P low latency by default
* handle Transmit Power Envelope (TPE) advertised by AP
* start using guard()
rtlwifi
* RTL8192DU support
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA)
support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
* tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits)
wifi: ath12k: add hw_link_id in ath12k_pdev
wifi: ath12k: add panic handler
wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity()
wifi: brcm80211: remove unused structs
wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type)
wifi: ath12k: do not process consecutive RDDM event
dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example
wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup()
wifi: rtlwifi: handle return value of usb init TX/RX
wifi: rtlwifi: Enable the new rtl8192du driver
wifi: rtlwifi: Add rtl8192du/sw.c
wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg
wifi: rtlwifi: Add rtl8192du/dm.{c,h}
wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h}
wifi: rtlwifi: Add rtl8192du/rf.{c,h}
wifi: rtlwifi: Add rtl8192du/trx.{c,h}
wifi: rtlwifi: Add rtl8192du/phy.{c,h}
wifi: rtlwifi: Add rtl8192du/hw.{c,h}
wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU
wifi: rtlwifi: Add rtl8192du/table.{c,h}
...
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 6 GHz scan request struct allocated by cfg80211_scan_6ghz() is
meant to be formed this way:
[base struct][channels][ssids][6ghz_params]
It is allocated with [channels] as the maximum number of channels
supported by the driver in the 6 GHz band, since allocation is
before knowing how many there will be.
However, the inner pointers are set incorrectly: initially, the
6 GHz scan parameters pointer is set:
[base struct][channels]
^ scan_6ghz_params
and later the SSID pointer is set to the end of the actually
_used_ channels.
[base struct][channels]
^ ssids
If many APs were to be discovered, and many channels used, and
there were many SSIDs, then the SSIDs could overlap the 6 GHz
parameters.
Additionally, the request->ssids for most of the function points
to the original request still (given the struct copy) but is used
normally, which is confusing.
Clear this up, by actually using the allocated space for 6 GHz
parameters _after_ the SSIDs, and set up the SSIDs initially so
they are used more clearly. Just like in nl80211.c, set them
only if there actually are SSIDs though.
Finally, also copy the elements (ie/ie_len) so they're part of
the same request, not pointing to the old request.
Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240510113738.4190692ef4ee.I0cb19188be17a8abd029805e3373c0a7777c214c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The commit 9bb7e0f24e ("cfg80211: add peer measurement with FTM
initiator API") defines four attributes NL80211_PMSR_FTM_REQ_ATTR_
{NUM_BURSTS_EXP}/{BURST_PERIOD}/{BURST_DURATION}/{FTMS_PER_BURST} in
following ways.
static const struct nla_policy
nl80211_pmsr_ftm_req_attr_policy[NL80211_PMSR_FTM_REQ_ATTR_MAX + 1] = {
...
[NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP] =
NLA_POLICY_MAX(NLA_U8, 15),
[NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD] = { .type = NLA_U16 },
[NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION] =
NLA_POLICY_MAX(NLA_U8, 15),
[NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST] =
NLA_POLICY_MAX(NLA_U8, 31),
...
};
That is, those attributes are expected to be NLA_U8 and NLA_U16 types.
However, the consumers of these attributes in `pmsr_parse_ftm` blindly
all use `nla_get_u32`, which is incorrect and causes functionality issues
on little-endian platforms. Hence, fix them with the correct `nla_get_u8`
and `nla_get_u16` functions.
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://msgid.link/20240521075059.47999-1-linma@zju.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Previously I had moved the wiphy work to the unbound
system workqueue, but missed that when it restarts and
during resume it was still using the normal system
workqueue. Fix that.
Fixes: 91d20ab9d9 ("wifi: cfg80211: use system_unbound_wq for wiphy work")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240522124126.7ca959f2cbd3.I3e2a71ef445d167b84000ccf934ea245aef8d395@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Just like it's not currently possible to start radar
detection while already operating, it shouldn't be
possible to start operating while radar detection is
running. Fix that.
Also, improve the check whether operating (carrier
might not be up if e.g. attempting to join IBSS).
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506211158.ae8dca3d0d6c.I7c70a66a5fbdbc63a78fee8a34f31d1995491bc3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
