Quite some information from the VPRINTK() is already covered by
tracepoints, so remove the pointless calls and convert the remaining
ones to structured logging.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Drop pointless VPRINTK() call and convert the remaining one to dev_dbg().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Drop pointless VPRINTK() calls for entering and existing interrupt
routines and convert the remaining calls to ata_port_dbg().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Drop pointless VPRINTK() calls and convert the remaining calls to
the existing bmdma tracepoint.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Drop pointless VPRINTK() calls for entering routines and setting up sg
tables. And while we're at it, remove the disabled debugging messages.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Drop pointless VPRINTK() calls for entering and existing interrupt
routines and convert the remaining calls to dev_dbg().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Most of the information is already covered by tracepoints
(if not downright pointless), so remove the VPRINTK() calls.
And while we're at it, remove ata_scsi_dump_cdb(), too,
as this information can be retrieved from scsi tracing.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Use standard ata logging macros instead of the hand-crafted
PDPRINTK and remove duplicate logging messages.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Replace all DPRINTK calls with the ata_XXX_dbg functions.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The DPRINTK call doesn't print information which isn't already covered
by tracepoints later on.
Remove it.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
There is only so much information to be glanced when the interrupt
routine is called and exited, so remove these DPRINTK() calls.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Move the DPRINTK calls over to dynamic debugging.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Always '-1', so drop it and simplify the function.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Replace all DPRINTK calls with ata_dev_dbg().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Rename ata_get_cmd_descrip() to ata_get_cmd_name() and simplify
it to return "unknown" instead of NULL.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Use standard pr_{debug,info,notice,warn,err} macros instead of the
hand-crafted printk helpers.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Drop DPRINTK calls for cdb translation as they are already covered
by other traces, and also drop the DPRINTK calls in ata_scsi_hotplug().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Add tracepoints for the HSM state machine and drop DPRINTK calls
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Add tracepoints for bus-master DMA and taskfile related functions.
That allows us to drop the relevant DPRINTK() calls.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Convert the existing ata_qc_issue() tracepoint into a template,
and add tracepoints for ata_qc_prep() and ata_qc_issue() based
on that template.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
To follow the flow of control we should be using tracepoints, as
they will tie in with the actual I/O flow and deliver a better
overview about what it happening.
This patch adds tracepoints for hard reset, soft reset, and postreset
and adds them in the libata-eh control flow.
With that we can drop the reset DPRINTK calls in the various drivers.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
With moving ata_dev_dbg() over to dynamic debugging ATA_HORKAGE_DUMP_ID
will now print out the raw IDENTIFY data without a header unless
explicitly enable via dyndebug.
So move the logging level up to INFO and have the header printed
always.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Use ata_dev_dbg() to print out the information in ata_dump_id()
and remove the ata_msg_probe() conditional.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Add an ata_port_classify() helper to print out the results from
the device classification and remove the debugging statements
from ata_dev_classify().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Debugging messages in pci init functions or sg setup are pretty
much pointless, as the workflow pretty much decides what happened.
So drop them.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Use min() in order to make code cleaner.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
platform_get_irq() will print a message when it fails.
No need to repeat this.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
If 64-bit mask attempt fails, the 32-bit will fail by the very same reason.
Don't even try the latter. It's a continuation of the changes that contains,
e.g. dcc02c19cc ("sata_sil24: use dma_set_mask_and_coherent").
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
sata_dwc_port_stop() is not used before being defined,
remove redundant forward declaration.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Use temporary variable for struct device to make code neater.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Use devm_platform_get_and_ioremap_resource() and
devm_platform_ioremap_resource() APIs instead of their
open coded analogues.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Use sysfs_emit() instead of sprintf() in fsl_sata_intr_coalescing_show()
and fsl_sata_rx_watermark_show().
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
Use struct_group() in struct command_desc around members acmd and fill,
so they can be referenced together. This will allow memset(), memcpy(),
and sizeof() to more easily reason about sizes, improve readability,
and avoid future warnings about writing beyond the end of acmd:
In function 'fortify_memset_chk',
inlined from 'sata_fsl_qc_prep' at drivers/ata/sata_fsl.c:534:3:
./include/linux/fortify-string.h:199:4: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
199 | __write_overflow_field();
| ^~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Static variables do not need to be initialized to 0.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
- Fix TUI exit screen refresh race condition in 'perf top'.
- Fix parsing of Intel PT VM time correlation arguments.
- Honour CPU filtering command line request of a script's switch events in
'perf script'.
- Fix printing of switch events in Intel PT python script.
- Fix duplicate alias events list printing in 'perf list', noticed on
heterogeneous arm64 systems.
- Fix return value of ids__new(), users expect NULL for failure, not
ERR_PTR(-ENOMEM).
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYdHBrgAKCRCyPKLppCJ+
J8C0AQDT9JKQlNPMETD5F2leq0YB5O3wGKwMvgff0hyblArU7QD/Yq7d1XgMkshF
lb2dEJfGIyClnrgtTo9nikraESM5JwE=
=RTLi
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix TUI exit screen refresh race condition in 'perf top'.
- Fix parsing of Intel PT VM time correlation arguments.
- Honour CPU filtering command line request of a script's switch events
in 'perf script'.
- Fix printing of switch events in Intel PT python script.
- Fix duplicate alias events list printing in 'perf list', noticed on
heterogeneous arm64 systems.
- Fix return value of ids__new(), users expect NULL for failure, not
ERR_PTR(-ENOMEM).
* tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf top: Fix TUI exit screen refresh race condition
perf pmu: Fix alias events list
perf scripts python: intel-pt-events.py: Fix printing of switch events
perf script: Fix CPU filtering of a script's switch events
perf intel-pt: Fix parsing of VM time correlation arguments
perf expr: Fix return value of ids__new()
Pull i2c fixes from Wolfram Sang:
"Better input validation for compat ioctls and a documentation bugfix
for 5.16"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Docs: Fixes link to I2C specification
i2c: validate user data in compat ioctl
-----BEGIN PGP SIGNATURE-----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=mJVP
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.16_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Use the proper CONFIG symbol in a preprocessor check.
* tag 'x86_urgent_for_v5.16_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build: Use the proper name CONFIG_FW_LOADER
When the following command is executed several times, a coredump file is
generated.
$ timeout -k 9 5 perf top -e task-clock
*******
*******
*******
0.01% [kernel] [k] __do_softirq
0.01% libpthread-2.28.so [.] __pthread_mutex_lock
0.01% [kernel] [k] __ll_sc_atomic64_sub_return
double free or corruption (!prev) perf top --sort comm,dso
timeout: the monitored command dumped core
When we terminate "perf top" using sending signal method,
SLsmg_reset_smg() called. SLsmg_reset_smg() resets the SLsmg screen
management routines by freeing all memory allocated while it was active.
However SLsmg_reinit_smg() maybe be called by another thread.
SLsmg_reinit_smg() will free the same memory accessed by
SLsmg_reset_smg(), thus it results in a double free.
SLsmg_reinit_smg() is called already protected by ui__lock, so we fix
the problem by adding pthread_mutex_trylock of ui__lock when calling
SLsmg_reset_smg().
Signed-off-by: Wenyu Liu <liuwenyu7@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: wuxu.wu@huawei.com
Link: http://lore.kernel.org/lkml/a91e3943-7ddc-f5c0-a7f5-360f073c20e6@huawei.com
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Signed-off-by: yaowenbin <yaowenbin1@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
