mirror of
https://github.com/torvalds/linux.git
synced 2024-11-29 07:31:29 +00:00
048a70e314
17397 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
AngeloGioacchino Del Regno
|
048a70e314
|
arm64: dts: mediatek: mt8395-nio-12l: Define RSEL in microamperes
The paris pinctrl driver supports specifying the RSEL drive strength in microamperes as well as internal bits definitions: choose to specify those in uA to avoid using hardware specific values in device trees. Link: https://lore.kernel.org/r/20240409114211.310462-4-angelogioacchino.delregno@collabora.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> |
||
|
AngeloGioacchino Del Regno
|
32b33be889
|
arm64: dts: medaitek: mt8395-nio-12l: Set i2c6 pins to bias-disable
GPIOs 25 and 26 do not support pull-up/pull-down when those are muxed
as I2C6's SDA6/SCL6 lines: set those to bias-disable to avoid warning
messages from the pinctrl driver.
Fixes:
|
||
|
AngeloGioacchino Del Regno
|
4a5191c5dd
|
arm64: dts: mediatek: mt8183: Refactor thermal zones
The thermal zones in MT8183 had cryptic names and all of them, apart
from the cpu-thermal zone, had no thermal trips, hence those were not
probed at all.
Refactor the tzts1..5 and tztsABB thermal zones to add the correct
thermal trips and give them a meaningful name, corresponding to the
actually monitored thermal zone.
While at it, also rename the thermal sensor node to "thermal-sensor".
Now the thermal zones are probing and their temperatures can be read.
Fixes:
|
||
|
AngeloGioacchino Del Regno
|
86beeec5dd
|
arm64: dts: mediatek: mt8192: Fix GPU thermal zone name for SVS
This SoC has two GPU related thermal zones: the primary zone must be
called "gpu-thermal" for SVS to pick it up.
Fixes:
|
||
|
AngeloGioacchino Del Regno
|
b2b6f2edb8
|
arm64: dts: mediatek: mt8195: Fix GPU thermal zone name for SVS
This SoC has two GPU related thermal zones: the primary zone must be
called "gpu-thermal" for SVS to pick it up.
Fixes:
|
||
Macpaul Lin
|
7982bf7ec2
|
arm64: dts: mediatek: add device-tree for Genio 700 EVK board
Add basic device-tree for the Genio 700 EVK board. The Genio 700 EVK is based on MediaTek MT8390 SoC. MT8390 hardware register maps are identical to MT8188. The Genio 700 EVK has following features: - MT8390 SoC - MT6365 PMIC - MT6319 Buck IC - 12V DC Jack - 2x4GB LPDDR4X - 64GB eMMC 5.1 - 64Mb SPI NOR - M.2 Key A-E slot with PCIe Gen2 and USB 2.0 - 2x DSI LCM ports - 2x touch sensor ports - 2x MIPI-CSI, as camera daughter board slots - USB 2 micro USB connector - USB 3 with 1 to 2 hub: - M.2 Key B slot - Type-C connector, with DisplayPort over Type-C - HDMI 2.0 TX port with Type A HDMI connector - eDP port - Gigabit Ethernet with RJ45 connector - SD card slot - Earphone Jack - Analog Microphone - 2x Digital Microphone - 3x UART with serial-to-usb converters and micro USB connectors Signed-off-by: Chris-QJ Chen <chris-qj.chen@mediatek.com> Signed-off-by: Pablo Sun <pablo.sun@mediatek.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230915081212.13959-2-macpaul.lin@mediatek.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> |
||
Rafał Miłecki
|
8f5a9d6b30
|
arm64: dts: mediatek: mt7981: add watchdog & WiFi controllers
MT7981 (Filogic 820) is a low cost version of MT7986 (Filogic 830) with the same watchdog controller. It also comes with on-SoC 802.11ax wireless. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20240221085547.27840-1-zajec5@gmail.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> |
||
|
Rafał Miłecki
|
09346afaba
|
arm64: dts: mediatek: mt7988: add XHCI controllers
Add bindings of two on-SoC XHCI controllers. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20240213130044.1976-2-zajec5@gmail.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> |
||
|
AngeloGioacchino Del Regno
|
42aa8daecd
|
arm64: dts: mediatek: Add missing chassis-type to MT8192 Chromebooks
None of the MT8192 Chromebooks had their chassis-type specified: add the right definition for each. Reviewed-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20240313141538.1438167-3-angelogioacchino.delregno@collabora.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> |
||
|
AngeloGioacchino Del Regno
|
85f9e6c303
|
arm64: dts: mediatek: Complete chassis-type for MT8183 Chromebooks
Define the chassis type on the remaining MT8183 Chromebooks. Link: https://lore.kernel.org/r/20240313141538.1438167-2-angelogioacchino.delregno@collabora.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> |
||
Daniel Danzberger
|
ab52c59103
|
arm64: dts: Add Airoha EN7581 SoC and EN7581 Evaluation Board
Introduce the Airoha EN7581 SoC's dtsi and the Airoha EN7581 Evaluation Board's dts file, as well as the required Makefiles. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Daniel Danzberger <dd@embedd.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/f05a36dd7e8ef34ead8a63aa10fcffb542229404.1709975956.git.lorenzo@kernel.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> |
||
|
Rafał Miłecki
|
deb26f5bce
|
arm64: dts: mediatek: Add Cudy WR3000 V1
Cudy WR3000 V1 is an MT7981B (AKA Filogic 820) based wireless router. It has 256 MiB of RAM, some LEDs & buttons and (not described yet) 4 Ethernet ports. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20240317223206.22033-5-zajec5@gmail.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> |
||
|
Rafał Miłecki
|
62b24c7fdf
|
arm64: dts: mediatek: mt7981: add pinctrl
MT7981 contains on-SoC PIN controller that is also a GPIO provider. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20240317223206.22033-4-zajec5@gmail.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> |
||
Linus Torvalds
|
f6b8e86b7a |
TTY/Serial changes for 6.10-rc1
Here is the big set of tty/serial driver changes for 6.10-rc1. Included
in here are:
- Usual good set of api cleanups and evolution by Jiri Slaby to make
the serial interfaces move out of the 1990's by using kfifos instead
of hand-rolling their own logic.
- 8250_exar driver updates
- max3100 driver updates
- sc16is7xx driver updates
- exar driver updates
- sh-sci driver updates
- tty ldisc api addition to help refuse bindings
- other smaller serial driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk4Cvg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymqpwCgnHU1NeBBUsvoSDOLk5oApIQ4jVgAn102jWlw
3dNDhA4i3Ay/mZdv8/Kj
=TI+P
-----END PGP SIGNATURE-----
Merge tag 'tty-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.10-rc1.
Included in here are:
- Usual good set of api cleanups and evolution by Jiri Slaby to make
the serial interfaces move out of the 1990's by using kfifos
instead of hand-rolling their own logic.
- 8250_exar driver updates
- max3100 driver updates
- sc16is7xx driver updates
- exar driver updates
- sh-sci driver updates
- tty ldisc api addition to help refuse bindings
- other smaller serial driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (113 commits)
serial: Clear UPF_DEAD before calling tty_port_register_device_attr_serdev()
serial: imx: Raise TX trigger level to 8
serial: 8250_pnp: Simplify "line" related code
serial: sh-sci: simplify locking when re-issuing RXDMA fails
serial: sh-sci: let timeout timer only run when DMA is scheduled
serial: sh-sci: describe locking requirements for invalidating RXDMA
serial: sh-sci: protect invalidating RXDMA on shutdown
tty: add the option to have a tty reject a new ldisc
serial: core: Call device_set_awake_path() for console port
dt-bindings: serial: brcm,bcm2835-aux-uart: convert to dtschema
tty: serial: uartps: Add support for uartps controller reset
arm64: zynqmp: Add resets property for UART nodes
dt-bindings: serial: cdns,uart: Add optional reset property
serial: 8250_pnp: Switch to DEFINE_SIMPLE_DEV_PM_OPS()
serial: 8250_exar: Keep the includes sorted
serial: 8250_exar: Make type of bit the same in exar_ee_*_bit()
serial: 8250_exar: Use BIT() in exar_ee_read()
serial: 8250_exar: Switch to use dev_err_probe()
serial: 8250_exar: Return directly from switch-cases
serial: 8250_exar: Decrease indentation level
...
|
||
|
Linus Torvalds
|
89601f675b |
USB / Thunderbolt changes for 6.10-rc1
Here is the big set of USB and Thunderbolt changes for 6.10-rc1.
Nothing hugely earth-shattering, just constant forward progress for
hardware support of new devices and cleanups over the drivers.
Included in here are:
- Thunderbolt / USB 4 driver updates
- typec driver updates
- dwc3 driver updates
- gadget driver updates
- uss720 driver id additions and fixes (people use USB->arallel port
devices still!)
- onboard-hub driver rename and additions for new hardware
- xhci driver updates
- other small USB driver updates and additions for quirks and api
changes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk4E7w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn0kACgr3uvAWXvfb9R4vCpC65F4f49ZQwAoIkHQBPl
/5HdrlIIYW2OzdUixH3e
=e3pI
-----END PGP SIGNATURE-----
Merge tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.10-rc1.
Nothing hugely earth-shattering, just constant forward progress for
hardware support of new devices and cleanups over the drivers.
Included in here are:
- Thunderbolt / USB 4 driver updates
- typec driver updates
- dwc3 driver updates
- gadget driver updates
- uss720 driver id additions and fixes (people use USB->arallel port
devices still!)
- onboard-hub driver rename and additions for new hardware
- xhci driver updates
- other small USB driver updates and additions for quirks and api
changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
drm/bridge: aux-hpd-bridge: correct devm_drm_dp_hpd_bridge_add() stub
usb: fotg210: Add missing kernel doc description
usb: dwc3: core: Fix unused variable warning in core driver
usb: typec: tipd: rely on i2c_get_match_data()
usb: typec: tipd: fix event checking for tps6598x
usb: typec: tipd: fix event checking for tps25750
dt-bindings: usb: qcom,dwc3: fix interrupt max items
usb: fotg210: Use *-y instead of *-objs in Makefile
usb: phy: tegra: Replace of_gpio.h by proper one
usb: typec: ucsi: displayport: Fix potential deadlock
usb: typec: qcom-pmic-typec: split HPD bridge alloc and registration
usb: musc: Remove unused list 'buffers'
usb: dwc3: Wait unconditionally after issuing EndXfer command
usb: gadget: u_audio: Clear uac pointer when freed.
usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind.
dt-bindings: usb: dwc3: Add QDU1000 compatible
usb: core: Remove the useless struct usb_devmap which is just a bitmap
MAINTAINERS: Remove {ehci,uhci}-platform.c from ARM/VT8500 entry
USB: usb_parse_endpoint: ignore reserved bits
usb: xhci: compact 'trb_in_td()' arguments
...
|
||
|
Linus Torvalds
|
1b03616209 |
soc: devicetree updates for v6.10, part 2
This is a follow-up to an earlier pull request for device tree changes,
as three platform maintainers sent their contents too late to be included
in the main set, but had not caused any further problems since then:
- The Amlogic platform now containts support for two new SoC types,
the A4 and A5 chips for audio applications. Both come with a
reference board, and one more dts file gets addded for the
combination of the MNT Reform Laptop with the BPI-CM4 CPU
module
- The ASpeed platform adds support for six addititional server
platforms that use ast2500 or ast2600 as their BMC, while
another one gets removed.
- The RISC-V platforms from Microchip, Starfive and and T-HEAD
get additional features for existing hardware, plus the
addition of the Milk-V Mars based on the StarFive VisionFive v2
board.
-----BEGIN PGP SIGNATURE-----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=iChs
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-late-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC devicetree updates from Arnd Bergmann:
"This is a follow-up to an earlier pull request for device tree
changes, as three platform maintainers sent their contents too late to
be included in the main set, but had not caused any further problems
since then:
- The Amlogic platform now containts support for two new SoC types,
the A4 and A5 chips for audio applications. Both come with a
reference board, and one more dts file gets addded for the
combination of the MNT Reform Laptop with the BPI-CM4 CPU module
- The ASpeed platform adds support for six addititional server
platforms that use ast2500 or ast2600 as their BMC, while another
one gets removed
- The RISC-V platforms from Microchip, Starfive and and T-HEAD get
additional features for existing hardware, plus the addition of the
Milk-V Mars based on the StarFive VisionFive v2 board"
* tag 'soc-dt-late-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (76 commits)
riscv: dts: microchip: add pac1934 power-monitor to icicle
riscv: dts: thead: Fix node ordering in TH1520 device tree
ARM: dts: aspeed: Add ASRock E3C256D4I BMC
dt-bindings: arm: aspeed: document ASRock E3C256D4I
dt-bindings: trivial-devices: add isil,isl69269
ARM: dts: aspeed: x4tf: Add dts for asus x4tf project
dt-bindings: arm: aspeed: add ASUS X4TF board
ARM: dts: aspeed: Remove Facebook Cloudripper dts
ARM: dts: aspeed: drop unused ref_voltage ADC property
ARM: dts: aspeed: harma: correct Mellanox multi-host property
ARM: dts: aspeed: yosemitev2: correct Mellanox multi-host property
ARM: dts: aspeed: yosemite4: correct Mellanox multi-host property
ARM: dts: aspeed: greatlakes: correct Mellanox multi-host property
ARM: dts: aspeed: Modify I2C bus configuration
ARM: dts: aspeed: Disable unused ADC channels for Asrock X570D4U BMC
ARM: dts: aspeed: Modify GPIO table for Asrock X570D4U BMC
ARM: dts: aspeed: yosemite4: set bus13 frequency to 100k
ARM: dts: Aspeed: Bonnell: Fix NVMe LED labels
ARM: dts: aspeed: yosemite4: Enable ipmb device for OCP debug card
ARM: dts: aspeed: ahe50dc: Update lm25066 regulator name
...
|
||
|
Linus Torvalds
|
ea5f6ad9ad |
platform-drivers-x86 for v6.10-1
Highlights:
- New drivers/platform/arm64 directory for arm64 embedded-controller drivers
- New drivers for:
- Acer Aspire 1 embedded controllers (for arm64 models)
- ACPI quickstart PNP0C32 buttons
- Dell All-In-One backlight support (dell-uart-backlight)
- Lenovo WMI camera buttons
- Lenovo Yoga Tablet 2 Pro 1380F/L fast charging
- MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only)
- MSI WMI sensors (fan speed sensors only for now)
- Asus WMI:
- 2024 ROG Mini-LED support
- MCU powersave support
- Vivobook GPU MUX support
- Misc. other improvements
- Ideapad laptop:
- Export FnLock LED as LED class device
- Switch platform profiles using thermal management key
- Intel drivers:
- IFS: various improvements
- PMC: Lunar Lake support
- SDSI: various improvements
- TPMI/ISST: various improvements
- tools: intel-speed-select: various improvements
- MS Surface drivers:
- Fan profile switching support
- Surface Pro thermal sensors support
- ThinkPad ACPI:
- Reworked hotkey support to use sparse keymaps
- Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys
- WMI core:
- New WMI driver development guide
- x86 Android tablets:
- Lenovo Yoga Tablet 2 Pro 1380F/L support
- Xiaomi MiPad 2 status LED and bezel touch buttons backlight support
- Miscellaneous cleanups / fixes / improvements
The following is an automated git shortlog grouped by driver:
ACPI:
- platform-profile: add platform_profile_cycle()
Add ACPI quickstart button (PNP0C32) driver:
- Add ACPI quickstart button (PNP0C32) driver
Add lenovo-yoga-tab2-pro-1380-fastcharger driver:
- Add lenovo-yoga-tab2-pro-1380-fastcharger driver
Add new Dell UART backlight driver:
- Add new Dell UART backlight driver
Add lenovo WMI camera button driver:
- Add lenovo WMI camera button driver
Add new MeeGoPad ANX7428 Type-C Cross Switch driver:
- Add new MeeGoPad ANX7428 Type-C Cross Switch driver
ISST:
- Support SST-BF and SST-TF per level
- Add missing MODULE_DESCRIPTION
- Add dev_fmt
- Use in_range() to check package ID validity
- Support partitioned systems
- Shorten the assignments for power_domain_info
- Use local variable for auxdev->dev
MAINTAINERS:
- drop Daniel Oliveira Nascimento
arm64:
- dts: qcom: acer-aspire1: Add embedded controller
asus-laptop:
- Use sysfs_emit() and sysfs_emit_at() to replace sprintf()
asus-wmi:
- cleanup main struct to avoid some holes
- Add support for MCU powersave
- ROG Ally increase wait time, allow MCU powersave
- adjust formatting of ppt-<name>() functions
- store a min default for ppt options
- support toggling POST sound
- add support variant of TUF RGB
- add support for Vivobook GPU MUX
- add support for 2024 ROG Mini-LED
- use sysfs_emit() instead of sprintf()
classmate-laptop:
- Add missing MODULE_DESCRIPTION()
devm-helpers:
- Fix a misspelled cancellation in the comments
dt-bindings:
- leds: Add LED_FUNCTION_FNLOCK
- platform: Add Acer Aspire 1 EC
hp-wmi:
- use sysfs_emit() instead of sprintf()
huawei-wmi:
- use sysfs_emit() instead of sprintf()
ideapad-laptop:
- switch platform profiles using thermal management key
- add FnLock LED class device
- add fn_lock_get/set functions
intel-vbtn:
- Log event code on unexpected button events
intel/pmc:
- Enable S0ix blocker show in Lunar Lake
- Add support to show S0ix blocker counter
- Update LNL signal status map
msi-laptop:
- Use sysfs_emit() to replace sprintf()
p2sb:
- Don't init until unassigned resources have been assigned
- Make p2sb_get_devfn() return void
platform:
- arm64: Add Acer Aspire 1 embedded controller driver
- Add ARM64 platform directory
platform/surface:
- aggregator: Log critical errors during SAM probing
- aggregator_registry: Add support for thermal sensors on the Surface Pro 9
- platform_profile: add fan profile switching
platform/x86/amd:
- pmc: Add new ACPI ID AMDI000B
- pmf: Add new ACPI ID AMDI0105
platform/x86/amd/hsmp:
- switch to use device_add_groups()
platform/x86/amd/pmc:
- Fix implicit declaration error on i386
- Add AMD MP2 STB functionality
platform/x86/fujitsu-laptop:
- Replace sprintf() with sysfs_emit()
platform/x86/intel-uncore-freq:
- Don't present root domain on error
platform/x86/intel/ifs:
- Disable irq during one load stage
- trace: display batch num in hex
- Classify error scenarios correctly
platform/x86/intel/pmc:
- Fix PCH names in comments
platform/x86/intel/sdsi:
- Add attribute to read the current meter state
- Add in-band BIOS lock support
- Combine read and write mailbox flows
- Set message size during writes
platform/x86/intel/tpmi:
- Add additional TPMI header fields
- Align comments in kernel-doc
- Check major version change for TPMI Information
- Handle error from tpmi_process_info()
quickstart:
- Fix race condition when reporting input event
- fix Kconfig selects
- Miscellaneous improvements
samsung-laptop:
- Use sysfs_emit() to replace the old interface sprintf()
think-lmi:
- Convert container_of() macros to static inline
thinkpad_acpi:
- Use false to set acpi_send_ev to false
- Support hotkey to disable trackpoint doubletap
- Support for system debug info hotkey
- Support for trackpoint doubletap
- Simplify known_ev handling
- Add mappings for adaptive kbd clipping-tool and cloud keys
- Switch to using sparse-keymap helpers
- Drop KEY_RESERVED special handling
- Use correct keycodes for volume and brightness keys
- Change hotkey_reserved_mask initialization
- Do not send ACPI netlink events for unknown hotkeys
- Move tpacpi_driver_event() call to tpacpi_input_send_key()
- Move hkey > scancode mapping to tpacpi_input_send_key()
- Drop tpacpi_input_send_key_masked() and hotkey_driver_event()
- Always call tpacpi_driver_event() for hotkeys
- Move hotkey_user_mask check to tpacpi_input_send_key()
- Move special original hotkeys handling out of switch-case
- Move adaptive kbd event handling to tpacpi_driver_event()
- Make tpacpi_driver_event() return if it handled the event
- Do hkey to scancode translation later
- Use tpacpi_input_send_key() in adaptive kbd code
- Drop ignore_acpi_ev
- Drop setting send_/ignore_acpi_ev defaults twice
- Provide hotkey_poll_stop_sync() dummy
- Take hotkey_mutex during hotkey_exit()
- change sprintf() to sysfs_emit()
- use platform_profile_cycle()
tools arch x86:
- Add dell-uart-backlight-emulator
tools/arch/x86/intel_sdsi:
- Add current meter support
- Simplify ascii printing
- Fix meter_certificate decoding
- Fix meter_show display
- Fix maximum meter bundle length
tools/power/x86/intel-speed-select:
- v1.19 release
- Display CPU as None for -1
- SST BF/TF support per level
- Increase number of CPUs displayed
- Present all TRL levels for turbo-freq
- Fix display for unsupported levels
- Support multiple dies
- Increase die count
toshiba_acpi:
- Add quirk for buttons on Z830
uv_sysfs:
- use sysfs_emit() instead of sprintf()
wmi:
- Add MSI WMI Platform driver
- Add driver development guide
- Mark simple WMI drivers as legacy-free
- Avoid returning AE_OK upon unknown error
- Support reading/writing 16 bit EC values
x86-android-tablets:
- Create LED device for Xiaomi Pad 2 bottom bezel touch buttons
- Xiaomi pad2 RGB LED fwnode updates
- Pass struct device to init()
- Add Lenovo Yoga Tablet 2 Pro 1380F/L data
- Unregister devices in reverse order
- Add swnode for Xiaomi pad2 indicator LED
- Use GPIO_LOOKUP() macro
xiaomi-wmi:
- Drop unnecessary NULL checks
- Fix race condition when reporting key events
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmZF1kwUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wSXwgAsaSH6Sawn5sHOj52lQY7gNI0uf3V
YfZFawRpreCrlwLPU2f7SX0mLW+hh+ekQ2C1NvaUUVqQwzONELh0DWSYJpzz/v1r
jD14EcY2dnTv+FVyvCj5jZsiYxo/ViTvthMduiO7rrJKN7aOej9iNn68P0lvcY8s
HDJ2lPFNGnY01snz3C1NyjyIWw8YsfwqXEqOmhrDyyoKLXpsDs8H/Jqq5yXfeLax
hSpjbGB85EGJPXna6Ux5TziPh/MYMtF1+8R4Fn0sGvfcZO6/H1fDne0uI9UwrKnN
d2g4VHXU2DIhTshUc14YT2AU27eQiZVN+J3VpuYIbC9cmlQ2F6bjN3uxoQ==
=UWbu
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- New drivers/platform/arm64 directory for arm64 embedded-controller
drivers
- New drivers:
- Acer Aspire 1 embedded controllers (for arm64 models)
- ACPI quickstart PNP0C32 buttons
- Dell All-In-One backlight support (dell-uart-backlight)
- Lenovo WMI camera buttons
- Lenovo Yoga Tablet 2 Pro 1380F/L fast charging
- MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only)
- MSI WMI sensors (fan speed sensors only for now)
- Asus WMI:
- 2024 ROG Mini-LED support
- MCU powersave support
- Vivobook GPU MUX support
- Misc. other improvements
- Ideapad laptop:
- Export FnLock LED as LED class device
- Switch platform profiles using thermal management key
- Intel drivers:
- IFS: various improvements
- PMC: Lunar Lake support
- SDSI: various improvements
- TPMI/ISST: various improvements
- tools: intel-speed-select: various improvements
- MS Surface drivers:
- Fan profile switching support
- Surface Pro thermal sensors support
- ThinkPad ACPI:
- Reworked hotkey support to use sparse keymaps
- Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys
- WMI core:
- New WMI driver development guide
- x86 Android tablets:
- Lenovo Yoga Tablet 2 Pro 1380F/L support
- Xiaomi MiPad 2 status LED and bezel touch buttons backlight
support
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (128 commits)
platform/x86: Add new MeeGoPad ANX7428 Type-C Cross Switch driver
devm-helpers: Fix a misspelled cancellation in the comments
tools arch x86: Add dell-uart-backlight-emulator
platform/x86: Add new Dell UART backlight driver
platform/x86: x86-android-tablets: Create LED device for Xiaomi Pad 2 bottom bezel touch buttons
platform/x86: x86-android-tablets: Xiaomi pad2 RGB LED fwnode updates
platform/x86: x86-android-tablets: Pass struct device to init()
platform/x86/amd: pmc: Add new ACPI ID AMDI000B
platform/x86/amd: pmf: Add new ACPI ID AMDI0105
platform/x86: p2sb: Don't init until unassigned resources have been assigned
platform/surface: aggregator: Log critical errors during SAM probing
platform/x86: ISST: Support SST-BF and SST-TF per level
platform/x86/fujitsu-laptop: Replace sprintf() with sysfs_emit()
tools/power/x86/intel-speed-select: v1.19 release
tools/power/x86/intel-speed-select: Display CPU as None for -1
tools/power/x86/intel-speed-select: SST BF/TF support per level
tools/power/x86/intel-speed-select: Increase number of CPUs displayed
tools/power/x86/intel-speed-select: Present all TRL levels for turbo-freq
tools/power/x86/intel-speed-select: Fix display for unsupported levels
tools/power/x86/intel-speed-select: Support multiple dies
...
|
||
|
Linus Torvalds
|
0c181b1d97 |
Power management updates for 6.10-rc1
- Rework the handling of disabled turbo in the intel_pstate driver and
make it update the maximum CPU frequency consistently regardless of
the reason on top of a number of cleanups (Rafael Wysocki).
- Add missing checks for NULL .exit() cpufreq driver callback to the
cpufreq core (Viresh Kumar).
- Prevent pulicy->max from going above the frequency QoS maximum value
when cpufreq_frequency_table_verify() is used (Xuewen Yan).
- Prevent a negative CPU number or frequency value from being printed
if they are really large (Joshua Yeong).
- Update MAINTAINERS entry for amd-pstate to add two new submaintainers
and a designated reviewer (Huang Rui).
- Clean up the amd-pstate driver and update its documentation (Gautham
Shenoy).
- Fix the highest frequency issue in the amd-pstate driver which limits
performance (Perry Yuan).
- Enable CPPC v2 for certain processors in the family 17H, as requested
by TR40 processor users who expect improved performance and lower
system temperature (Perry Yuan).
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing (Perry Yuan).
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have CPPC
v2 capability (Perry Yuan).
- Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and
general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi,
Dan Carpenter, Viresh Kumar).
- CPPC cpufreq: Fix possible null pointer dereference (Aleksandr
Mishin).
- Eliminate uses of of_node_put() from cpufreq (Javier Carrasco,
Shivani Gupta).
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens).
- mediatek cpufreq: Add support for MT7988A (Sam Shih).
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei Fan).
- Fix struct cpudata::epp_cached kernel-doc in the intel_pstate cpufreq
driver (Jeff Johnson).
- Fix kerneldoc description of ladder_do_selection() (Jeff Johnson).
- Convert the cpuidle kirkwood driver to platform remove callback
returning void (Yangtao Li).
- Replace deprecated strncpy() with strscpy() in the hibernation core
code (Justin Stitt).
- Use %ps to simplify debug output in the core system-wide suspend and
resume code (Len Brown).
- Remove unnecessary else from device_init_wakeup() and make
device_wakeup_disable() return void (Dhruva Gole).
- Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui).
- Add support for ArrowLake-H platform to the Intel RAPL driver (Zhang
Rui).
- Avoid explicit cpumask allocation on stack in DTPM (Dawei Li).
- Make the Samsung exynos-asv driver update the Energy Model after
adjusting voltage on top of some preliminary changes of the OPP and
Enery Model generic code (Lukasz Luba).
- Remove a reference to a function that has been dropped from the power
management documentation (Bjorn Helgaas).
- Convert the platfrom remove callback to .remove_new for the
exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and
rk3399_dmc devfreq drivers (Uwe Kleine-König).
- Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon).
-----BEGIN PGP SIGNATURE-----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=el5Y
-----END PGP SIGNATURE-----
Merge tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly cpufreq updates, including a significant intel-pstate
driver update and several amd-pstate improvements plus some updates of
ARM cpufreq drivers, general fixes and cleanups.
Also included are changes related to system sleep, power capping
updates adding support for a new platform and a new hardware feature
(among other things), a Samsung exynos-asv driver update allowing it
to change its Energy Model after adjusting voltage, minor cpuidle and
devfreq updates and a small documentation cleanup.
Specifics:
- Rework the handling of disabled turbo in the intel_pstate driver
and make it update the maximum CPU frequency consistently
regardless of the reason on top of a number of cleanups (Rafael
Wysocki)
- Add missing checks for NULL .exit() cpufreq driver callback to the
cpufreq core (Viresh Kumar)
- Prevent pulicy->max from going above the frequency QoS maximum
value when cpufreq_frequency_table_verify() is used (Xuewen Yan)
- Prevent a negative CPU number or frequency value from being printed
if they are really large (Joshua Yeong)
- Update MAINTAINERS entry for amd-pstate to add two new
submaintainers and a designated reviewer (Huang Rui)
- Clean up the amd-pstate driver and update its documentation
(Gautham Shenoy)
- Fix the highest frequency issue in the amd-pstate driver which
limits performance (Perry Yuan)
- Enable CPPC v2 for certain processors in the family 17H, as
requested by TR40 processor users who expect improved performance
and lower system temperature (Perry Yuan)
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing (Perry Yuan)
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have
CPPC v2 capability (Perry Yuan)
- Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and
general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi,
Dan Carpenter, Viresh Kumar)
- CPPC cpufreq: Fix possible null pointer dereference (Aleksandr
Mishin)
- Eliminate uses of of_node_put() from cpufreq (Javier Carrasco,
Shivani Gupta)
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens)
- mediatek cpufreq: Add support for MT7988A (Sam Shih)
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei
Fan)
- Fix struct cpudata::epp_cached kernel-doc in the intel_pstate
cpufreq driver (Jeff Johnson)
- Fix kerneldoc description of ladder_do_selection() (Jeff Johnson)
- Convert the cpuidle kirkwood driver to platform remove callback
returning void (Yangtao Li)
- Replace deprecated strncpy() with strscpy() in the hibernation core
code (Justin Stitt)
- Use %ps to simplify debug output in the core system-wide suspend
and resume code (Len Brown)
- Remove unnecessary else from device_init_wakeup() and make
device_wakeup_disable() return void (Dhruva Gole)
- Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui)
- Add support for ArrowLake-H platform to the Intel RAPL driver
(Zhang Rui)
- Avoid explicit cpumask allocation on stack in DTPM (Dawei Li)
- Make the Samsung exynos-asv driver update the Energy Model after
adjusting voltage on top of some preliminary changes of the OPP and
Enery Model generic code (Lukasz Luba)
- Remove a reference to a function that has been dropped from the
power management documentation (Bjorn Helgaas)
- Convert the platfrom remove callback to .remove_new for the
exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and
rk3399_dmc devfreq drivers (Uwe Kleine-König)
- Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon)"
* tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (68 commits)
PM / devfreq: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
PM / devfreq: rk3399_dmc: Convert to platform remove callback returning void
PM / devfreq: sun8i-a33-mbus: Convert to platform remove callback returning void
PM / devfreq: mtk-cci: Convert to platform remove callback returning void
PM / devfreq: exynos-ppmu: Convert to platform remove callback returning void
PM / devfreq: exynos-nocp: Convert to platform remove callback returning void
cpufreq: amd-pstate: fix the highest frequency issue which limits performance
cpufreq: intel_pstate: fix struct cpudata::epp_cached kernel-doc
cpuidle: ladder: fix ladder_do_selection() kernel-doc
powercap: intel_rapl_tpmi: Enable PMU support
powercap: intel_rapl: Introduce APIs for PMU support
PM: hibernate: replace deprecated strncpy() with strscpy()
cpufreq: Fix up printing large CPU numbers and frequency values
MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer
cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq
cpufreq: amd-pstate: fix code format problems
cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing
cppc_acpi: print error message if CPPC is unsupported
cpufreq: amd-pstate: get transition delay and latency value from ACPI tables
cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
...
|
||
|
Linus Torvalds
|
103916ffe2 |
arm64 updates for 6.10
ACPI:
* Support for the Firmware ACPI Control Structure (FACS) signature
feature which is used to reboot out of hibernation on some systems.
Kbuild:
* Support for building Flat Image Tree (FIT) images, where the kernel
Image is compressed alongside a set of devicetree blobs.
Memory management:
* Optimisation of our early page-table manipulation for creation of the
linear mapping.
* Support for userfaultfd write protection, which brings along some nice
cleanups to our handling of invalid but present ptes.
* Extend our use of range TLBI invalidation at EL1.
Perf and PMUs:
* Ensure that the 'pmu->parent' pointer is correctly initialised by PMU
drivers.
* Avoid allocating 'cpumask_t' types on the stack in some PMU drivers.
* Fix parsing of the CPU PMU "version" field in assembly code, as it
doesn't follow the usual architectural rules.
* Add best-effort unwinding support for USER_STACKTRACE
* Minor driver fixes and cleanups.
Selftests:
* Minor cleanups to the arm64 selftests (missing NULL check, unused
variable).
Miscellaneous
* Add a command-line alias for disabling 32-bit application support.
* Add part number for Neoverse-V2 CPUs.
* Minor fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmY+IWkQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNBVNB/9JG4jlmgxzbTDoer0md31YFvWCDGeOKx1x
g3XhE24W5w8eLXnc75p7/tOUKfo0TNWL4qdUs0hJCEUAOSy6a4Qz13bkkkvvBtDm
nnHvEjidx5yprHggocsoTF29CKgHMJ3bt8rJe6g+O3Lp1JAFlXXNgplX5koeaVtm
TtaFvX9MGyDDNkPIcQ/SQTFZJ2Oz51+ik6O8SYuGYtmAcR7MzlxH77lHl2mrF1bf
Jzv/f5n0lS+Gt9tRuFWhbfEm4aKdUlLha4ufzUq42/vJvELboZbG3LqLxRG8DbqR
+HvyZOG/xtu2dbzDqHkRumMToWmwzD4oBGSK4JAoJxeHavEdAvSG
=JMvT
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The most interesting parts are probably the mm changes from Ryan which
optimise the creation of the linear mapping at boot and (separately)
implement write-protect support for userfaultfd.
Outside of our usual directories, the Kbuild-related changes under
scripts/ have been acked by Masahiro whilst the drivers/acpi/ parts
have been acked by Rafael and the addition of cpumask_any_and_but()
has been acked by Yury.
ACPI:
- Support for the Firmware ACPI Control Structure (FACS) signature
feature which is used to reboot out of hibernation on some systems
Kbuild:
- Support for building Flat Image Tree (FIT) images, where the kernel
Image is compressed alongside a set of devicetree blobs
Memory management:
- Optimisation of our early page-table manipulation for creation of
the linear mapping
- Support for userfaultfd write protection, which brings along some
nice cleanups to our handling of invalid but present ptes
- Extend our use of range TLBI invalidation at EL1
Perf and PMUs:
- Ensure that the 'pmu->parent' pointer is correctly initialised by
PMU drivers
- Avoid allocating 'cpumask_t' types on the stack in some PMU drivers
- Fix parsing of the CPU PMU "version" field in assembly code, as it
doesn't follow the usual architectural rules
- Add best-effort unwinding support for USER_STACKTRACE
- Minor driver fixes and cleanups
Selftests:
- Minor cleanups to the arm64 selftests (missing NULL check, unused
variable)
Miscellaneous:
- Add a command-line alias for disabling 32-bit application support
- Add part number for Neoverse-V2 CPUs
- Minor fixes and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (64 commits)
arm64/mm: Fix pud_user_accessible_page() for PGTABLE_LEVELS <= 2
arm64/mm: Add uffd write-protect support
arm64/mm: Move PTE_PRESENT_INVALID to overlay PTE_NG
arm64/mm: Remove PTE_PROT_NONE bit
arm64/mm: generalize PMD_PRESENT_INVALID for all levels
arm64: simplify arch_static_branch/_jump function
arm64: Add USER_STACKTRACE support
arm64: Add the arm64.no32bit_el0 command line option
drivers/perf: hisi: hns3: Actually use devm_add_action_or_reset()
drivers/perf: hisi: hns3: Fix out-of-bound access when valid event group
drivers/perf: hisi_pcie: Fix out-of-bound access when valid event group
kselftest: arm64: Add a null pointer check
arm64: defer clearing DAIF.D
arm64: assembler: update stale comment for disable_step_tsk
arm64/sysreg: Update PIE permission encodings
kselftest/arm64: Remove unused parameters in abi test
perf/arm-spe: Assign parents for event_source device
perf/arm-smmuv3: Assign parents for event_source device
perf/arm-dsu: Assign parents for event_source device
perf/arm-dmc620: Assign parents for event_source device
...
|
||
|
Linus Torvalds
|
6bfd2d442a |
Updates for the interrupt subsystem:
- Core code:
- Interrupt storm detection for the lockup watchdog:
Lockups which are caused by interrupt storms are not easy to debug
because there is no information about the events which make the lockup
detector trigger.
To make this more user friendly, provide an extenstion to interrupt
statistics which allows to take snapshots and an interface to retrieve
the delta to the snapshot. Use this new mechanism in the watchdog code
to do a two stage lockup analysis by taking the snapshot and printing
the deltas for the topmost active interrupts on the second trigger.
Note: This contains both the interrupt and the watchdog changes as
the latter depend on the former obviously.
- Avoid summation loops in the /proc/interrupts output and use the global
counter when possible
- Skip suspended interrupts on CPU hotplug operations to ensure that they
are not delivered before the system resumes the device drivers when
coming out of suspend.
- On CPU hot-unplug interrupts which are affine to the outgoing CPU are
migrated to a different CPU in the affinity mask. This can fail when
the CPUs have no vectors left. Instead of giving up try to migrate it
to any online CPU and thereby breaking the affinity setting in order to
prevent a stale device interrupt which targets an offline CPU
- The usual small cleanups
- Driver code:
- Support for the RISCV AIA MSI controller
- Make the interrupt allocation for the Loongson PCH controller more
flexible to prevent vector exhaustion
- The usual set of cleanups and fixes all over the place
-----BEGIN PGP SIGNATURE-----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=jFLf
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Core code:
- Interrupt storm detection for the lockup watchdog:
Lockups which are caused by interrupt storms are not easy to debug
because there is no information about the events which make the
lockup detector trigger.
To make this more user friendly, provide an extenstion to interrupt
statistics which allows to take snapshots and an interface to
retrieve the delta to the snapshot. Use this new mechanism in the
watchdog code to do a two stage lockup analysis by taking the
snapshot and printing the deltas for the topmost active interrupts
on the second trigger.
Note: This contains both the interrupt and the watchdog changes as
the latter depend on the former obviously.
- Avoid summation loops in the /proc/interrupts output and use the
global counter when possible
- Skip suspended interrupts on CPU hotplug operations to ensure that
they are not delivered before the system resumes the device drivers
when coming out of suspend.
- On CPU hot-unplug interrupts which are affine to the outgoing CPU
are migrated to a different CPU in the affinity mask. This can fail
when the CPUs have no vectors left. Instead of giving up try to
migrate it to any online CPU and thereby breaking the affinity
setting in order to prevent a stale device interrupt which targets
an offline CPU
- The usual small cleanups
Driver code:
- Support for the RISCV AIA MSI controller
- Make the interrupt allocation for the Loongson PCH controller more
flexible to prevent vector exhaustion
- The usual set of cleanups and fixes all over the place"
* tag 'irq-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
irqchip/gic-v3-its: Remove BUG_ON in its_vpe_irq_domain_alloc
cpuidle: Avoid explicit cpumask allocation on stack
irqchip/sifive-plic: Avoid explicit cpumask allocation on stack
irqchip/riscv-aplic-direct: Avoid explicit cpumask allocation on stack
irqchip/loongson-eiointc: Avoid explicit cpumask allocation on stack
irqchip/gic-v3-its: Avoid explicit cpumask allocation on stack
irqchip/irq-bcm6345-l1: Avoid explicit cpumask allocation on stack
cpumask: Introduce cpumask_first_and_and()
irqchip/irq-brcmstb-l2: Avoid saving mask on shutdown
genirq: Reuse irq_is_nmi()
genirq/cpuhotplug: Retry with cpu_online_mask when migration fails
genirq/cpuhotplug: Skip suspended interrupts when restoring affinity
arm64: dts: st: Add interrupt parent to pinctrl on stm32mp251
arm64: dts: st: Add exti1 and exti2 nodes on stm32mp251
ARM: dts: stm32: List exti parent interrupts on stm32mp131
ARM: dts: stm32: List exti parent interrupts on stm32mp151
arm64: Kconfig.platforms: Enable STM32_EXTI for ARCH_STM32
irqchip/stm32-exti: Mark events reserved with RIF configuration check
irqchip/stm32-exti: Skip secure events
irqchip/stm32-exti: Convert driver to standard PM
...
|
||
Rafael J. Wysocki
|
14449382b5 |
Merge branch 'pm-cpufreq'
Merge cpufreq updates for 6.10:
- Rework the handling of disabled turbo in the intel_pstate driver and
make it update the maximum CPU frequency consistently regardless of
the reason on top of a number of cleanups (Rafael Wysocki).
- Add missing checks for NULL .exit() cpufreq driver callback to the
cpufreq core (Viresh Kumar).
- Prevent pulicy->max from going above the frequency QoS maximum value
when cpufreq_frequency_table_verify() is used (Xuewen Yan).
- Prevent a negative CPU number or frequency value from being printed
if they are really large (Joshua Yeong).
- Update MAINTAINERS entry for amd-pstate to add two new submaintainers
and a designated reviewer (Huang Rui).
- Clean up the amd-pstate driver and update its documentation (Gautham
Shenoy).
- Fix the highest frequency issue in the amd-pstate driver which limits
performance (Perry Yuan).
- Enable CPPC v2 for certain processors in the family 17H, as requested
by TR40 processor users who expect improved performance and lower
system temperature (Perry Yuan).
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing (Perry Yuan).
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have CPPC
v2 capability (Perry Yuan).
- Sun50i: Add support for opp_supported_hw, H616 platform and general
cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi, Dan
Carpenter, Viresh Kumar).
- CPPC: Fix possible null pointer dereference (Aleksandr Mishin).
- Eliminate uses of of_node_put() (Javier Carrasco, and Shivani Gupta).
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens).
- mediatek: Add support for MT7988A (Sam Shih).
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei Fan).
- Fix struct cpudata::epp_cached kernel-doc in the intel_pstate cpufreq
driver (Jeff Johnson).
* pm-cpufreq: (46 commits)
cpufreq: amd-pstate: fix the highest frequency issue which limits performance
cpufreq: intel_pstate: fix struct cpudata::epp_cached kernel-doc
cpufreq: Fix up printing large CPU numbers and frequency values
MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer
cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq
cpufreq: amd-pstate: fix code format problems
cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing
cppc_acpi: print error message if CPPC is unsupported
cpufreq: amd-pstate: get transition delay and latency value from ACPI tables
cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
cpufreq: amd-pstate: Remove amd_get_{min,max,nominal,lowest_nonlinear}_freq()
cpufreq: amd-pstate: Unify computation of {max,min,nominal,lowest_nonlinear}_freq
cpufreq: amd-pstate: Document the units for freq variables in amd_cpudata
cpufreq: amd-pstate: Document *_limit_* fields in struct amd_cpudata
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM4450 compatibles
cpufreq: sun50i: fix error returns in dt_has_supported_hw()
cpufreq: brcmstb-avs-cpufreq: ISO C90 forbids mixed declarations
cpufreq: dt-platdev: eliminate uses of of_node_put()
cpufreq: dt: eliminate uses of of_node_put()
cpufreq: ti: Implement scope-based cleanup in ti_cpufreq_match_node()
...
|
||
|
Linus Torvalds
|
6c60000f0b |
soc: devicetree updates for 6.10, part 1
The updates this time are a bit smaller than most times, mainly because
it is not totally dominated by new Qualcomm hardware support. Instead,
we larger than average updates for Rockchips, NXP, Allwinner and TI.
The only two new SoCs this time are both from NXP and are minor variants
of already supported ones.
The updates for aspeed, amlogic and mediatek came a little late, so
I'm saving those for part 2 in a few days if everything turns out fine.
New machines this time contain:
- two Broadcom SoC based wireless routers from Asus
- Five allwinner based consumer devices for gaming, set-top-box and
eboot reader applications
- Three older phones based on Qualcomm chips, plus the more recent
Sony Xperia 1 V
- 14 industrial and embedded boards based on NXP i.MX6, i.MX8,
layerscape and s32g3 SoCs
- six rockchips boards including another handheld game console
and a few single-board computers
On top of these, we have the usual cleanups for dtc warnings and
updates to add more features to already merged machines.
-----BEGIN PGP SIGNATURE-----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=SnV4
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"The updates this time are a bit smaller than most times, mainly
because it is not totally dominated by new Qualcomm hardware support.
Instead, we larger than average updates for Rockchips, NXP, Allwinner
and TI. The only two new SoCs this time are both from NXP and are
minor variants of already supported ones.
The updates for aspeed, amlogic and mediatek came a little late, so
I'm saving those for part 2 in a few days if everything turns out
fine.
New machines this time contain:
- two Broadcom SoC based wireless routers from Asus
- Five allwinner based consumer devices for gaming, set-top-box and
eboot reader applications
- Three older phones based on Qualcomm chips, plus the more recent
Sony Xperia 1 V
- 14 industrial and embedded boards based on NXP i.MX6, i.MX8,
layerscape and s32g3 SoCs
- six rockchips boards including another handheld game console and a
few single-board computers
On top of these, we have the usual cleanups for dtc warnings and
updates to add more features to already merged machines"
* tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (612 commits)
arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit address
arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cells
arm64: dts: marvell: eDPU: drop redundant address/size-cells
arm64: dts: qcom: pm6150: correct USB VBUS regulator compatible
arm64: dts: rockchip: add rk3588 pcie and php IOMMUs
arm64: dts: rockchip: enable onboard spi flash for rock-3a
arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5
arm64: dts: rockchip: Enable GPU on Orange Pi 5
arm64: dts: rockchip: enable GPU on khadas-edge2
arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO board
arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute Module
arm64: dts: rockchip: Add Radxa ROCK 3C
dt-bindings: arm: rockchip: add Radxa ROCK 3C
arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl
arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2
arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01]
arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive
arm64: dts: Add/fix /memory node unit-addresses
arm64: dts: qcom: qcs404: fix bluetooth device address
arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint reader
...
|
||
Greg Kroah-Hartman
|
adeab5bfb8 |
Linux 6.9-rc7
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmY39LkeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGaB8H+wWcwT1O7K2SQx1a sHDYJSXfbjgShS7Wt+gbDNvhGJqG/5FkpHyBmBKUdElZs8QMf21GAbIfJvzcNThA g+FakIMjfhNH/dr6TJXHWbb2NZV67exDbbuaQDyMhNhIZqil4BH/OEPbLYIdquvm /HDGFB/whVoHVC+Ug8esEOL3Uy+rizBDlsT/K4ZgpOC3TuUmlRpptSVACwjcCGXM PFKyyTIr0ZnKcz3+4yTEtpDFm6e/ujxMwM66GBCgmPaZ3lJp5ruY3kGpBTmSyoqV Rh3CQlIhBo8gwlAx/yQXfxEZomhxT6DfRpc6s/1W0J1UZN/j2pYy056OYyckG32c uQ9ujxQ= =M0wP -----END PGP SIGNATURE----- Merge 6.9-rc7 into usb-next We want the USB fixes in here as well, and resolve a merge conflict in drivers/usb/dwc3/core.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Linus Torvalds
|
8c3b7565f8 |
Including fixes from bluetooth and IPsec.
The bridge patch is actually a follow-up to a recent fix in the same
area. We have a pending v6.8 AF_UNIX regression; it should be solved
soon, but not in time for this PR.
Current release - regressions:
- eth: ks8851: Queue RX packets in IRQ handler instead of disabling BHs
- net: bridge: fix corrupted ethernet header on multicast-to-unicast
Current release - new code bugs:
- xfrm: fix possible bad pointer derferencing in error path
Previous releases - regressionis:
- core: fix out-of-bounds access in ops_init
- ipv6:
- fix potential uninit-value access in __ip6_make_skb()
- fib6_rules: avoid possible NULL dereference in fib6_rule_action()
- tcp: use refcount_inc_not_zero() in tcp_twsk_unique().
- rtnetlink: correct nested IFLA_VF_VLAN_LIST attribute validation
- rxrpc: fix congestion control algorithm
- bluetooth:
- l2cap: fix slab-use-after-free in l2cap_connect()
- msft: fix slab-use-after-free in msft_do_close()
- eth: hns3: fix kernel crash when devlink reload during initialization
- eth: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21 family
Previous releases - always broken:
- xfrm: preserve vlan tags for transport mode software GRO
- tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets
- eth: hns3: keep using user config after hardware reset
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=qYKQ
-----END PGP SIGNATURE-----
Merge tag 'net-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and IPsec.
The bridge patch is actually a follow-up to a recent fix in the same
area. We have a pending v6.8 AF_UNIX regression; it should be solved
soon, but not in time for this PR.
Current release - regressions:
- eth: ks8851: Queue RX packets in IRQ handler instead of disabling
BHs
- net: bridge: fix corrupted ethernet header on multicast-to-unicast
Current release - new code bugs:
- xfrm: fix possible bad pointer derferencing in error path
Previous releases - regressionis:
- core: fix out-of-bounds access in ops_init
- ipv6:
- fix potential uninit-value access in __ip6_make_skb()
- fib6_rules: avoid possible NULL dereference in fib6_rule_action()
- tcp: use refcount_inc_not_zero() in tcp_twsk_unique().
- rtnetlink: correct nested IFLA_VF_VLAN_LIST attribute validation
- rxrpc: fix congestion control algorithm
- bluetooth:
- l2cap: fix slab-use-after-free in l2cap_connect()
- msft: fix slab-use-after-free in msft_do_close()
- eth: hns3: fix kernel crash when devlink reload during
initialization
- eth: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21
family
Previous releases - always broken:
- xfrm: preserve vlan tags for transport mode software GRO
- tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets
- eth: hns3: keep using user config after hardware reset"
* tag 'net-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net: dsa: mv88e6xxx: read cmode on mv88e6320/21 serdes only ports
net: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21 family
net: hns3: fix kernel crash when devlink reload during initialization
net: hns3: fix port vlan filter not disabled issue
net: hns3: use appropriate barrier function after setting a bit value
net: hns3: release PTP resources if pf initialization failed
net: hns3: change type of numa_node_mask as nodemask_t
net: hns3: direct return when receive a unknown mailbox message
net: hns3: using user configure after hardware reset
net/smc: fix neighbour and rtable leak in smc_ib_find_route()
ipv6: prevent NULL dereference in ip6_output()
hsr: Simplify code for announcing HSR nodes timer setup
ipv6: fib6_rules: avoid possible NULL dereference in fib6_rule_action()
dt-bindings: net: mediatek: remove wrongly added clocks and SerDes
rxrpc: Only transmit one ACK per jumbo packet received
rxrpc: Fix congestion control algorithm
selftests: test_bridge_neigh_suppress.sh: Fix failures due to duplicate MAC
ipv6: Fix potential uninit-value access in __ip6_make_skb()
net: phy: marvell-88q2xxx: add support for Rev B1 and B2
appletalk: Improve handling of broadcast packets
...
|
||
Arnd Bergmann
|
0cb7e0c617 |
A few more Qualcomm Arm64 DeviceTree updates for v6.10
This corrects the obviously broken compatible of the USB VBUS regulator in PM6150. It clears the odd-looking default address on QCS404 EVB, with the expectation that a proper address is provides by other means. The newly added SM8650 GPU node is corrected with a missing memory region. The third DWC3 instance on SC8280XP is added, and enabled on Lenovo Thinkpad X13s to give working fingerprint sensor. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmY64NIVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3Fjj8P/1p1uZmJtx2/kaZM3XKBd2QpEP3L NYbWxDdoHkeK+qRhLi+T/g822BVfTBEc28/lrF/nB+LvpIwKGLUywLXdsLRrVrTQ lhUqKsViJ35/lispBuZzCWyx5JwsrimERKj6XLnIkPLQUZs4HI4y275LA4KMGjnR ctoJR5zosBE9kOF9bgPNMfR/rWHVBYHCCMKsj1XpfRmCe+F/Yqzw9vw4utKjleGD l7ayPVaN/MvwsNCM4WmRQ5PfXPkYGn8zLSHAEqQrkWMBgA3kMboVwRF2SDchsM0q T4LV84B9WDLs9pn8xik5ZzSo6NVvGOxSPdUGiYATqRjBr/kYMNf3fyCUNy3WMsv5 XS8Zf15gqfBFPiQV4AQOavXSZn6zpy3K6M4X6ru2G+joV5gd7E7B3mU0rPqsXTyr wy6gatiG8g10oCtb35LKQuXSPvYaCbyfpKPMZcUfFp8EhVSfHuVkV9g41VF+vJSI xQEa5tiNkoAj86rVy/AV2QreBPlEXzONfL5RFbivCgz9L9XblhJ3LnX7wvsW+UfM 21jOLshBi69H0z2v3mMk3nLG9EDrgPnQQIkJPVKis8BJmYeKZZk1kJsyQOnXlJeW YkxX/wchZE+eEP7MUkGzdWUzWZX7f+8fveRkOAHdU1BIgPHFvqwoFZO0x+sHqXHf CBGUAap9EKoz4kn9 =IC06 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmY7JF4ACgkQYKtH/8kJ Uic5txAA41jpjYMEkCZjPX8KVzWGBLB0OVkTY+tEZg05Eo/Vv01CoxgAwmQJnoj5 6jPg/PlMoAjSFfvFVO6KI57EeaOPpvgapX8zNy7ezJfAoc+waSbB2SpxA5CFJS7h YjGN+wC7zSHM/dqz7s1SENOGvy4FYmVBUJq1dsqehm0uBs+6lP6h16dTSOVcvqzD 5PgwUE1NToEOUF3tlbMUHwKzBzKIOUZmI+YD9JZoeHBv6QGVe4G6bQOpnGt18Udy lhpPykQ3gabRbo0c9gVfEpSfKbP7hSYa6qrVCrWIg/TL8CmewIg74u8XNM2MUhKT qiXMbCpYN3MVHHM9y4cC7EvhtAVkxzr72DTCJRw3zoUYzOO/aJ5e8ZLpSiAvbeUN 8yszmlMl1KCzJlSo208E9bnbK13mfowR6x8ahgytsbSkgDQqnQmJleDC0Dun+An3 V6TA90Xb1CufsaIGUXhpRt5nNmGbDgJ7MayG2WDiMu2iL3csRl5QtSnop6ZbIbk1 5wV1LxCzNXlDnU2kOF0B4LEbHbKcmdL5bo0enrnC17g2TMbF8LVx9OZ6sgMVxdH8 4xUdqGcxgEQxQxcUkca3Jw/dO4fiQSrWLAMROtdiy3ro3Mtjr+ZVmnwLu25ZoQM9 2ZeGhsG6l1Gz2ty8JEybIo8JgaKLSx8phbubmtHOrtotsQ17Bak= =aKX7 -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt A few more Qualcomm Arm64 DeviceTree updates for v6.10 This corrects the obviously broken compatible of the USB VBUS regulator in PM6150. It clears the odd-looking default address on QCS404 EVB, with the expectation that a proper address is provides by other means. The newly added SM8650 GPU node is corrected with a missing memory region. The third DWC3 instance on SC8280XP is added, and enabled on Lenovo Thinkpad X13s to give working fingerprint sensor. * tag 'qcom-arm64-for-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: pm6150: correct USB VBUS regulator compatible arm64: dts: qcom: qcs404: fix bluetooth device address arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint reader arm64: dts: qcom: sc8280xp: Add USB DWC3 Multiport controller arm64: dts: qcom: sm8650: Fix GPU cx_mem size Link: https://lore.kernel.org/r/20240508021820.206441-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
24ae5d2489 |
Amlogic ARM64 DT changes for v6.10:
- New Boards: - MNT Reform 2 CM4 adapter with a BPI-CM4 Module - AV400 (Amlogic A5) - BA400 (Amlogic A4) - Initial Amlogic A4 & A5 support - MIPI DSI support for G12A, G12B & SM1 SoCs - Overlay for Khadas TS050 panel for the Khadas VIM3/VIM3L - Amlogic T7 reset controller -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmY0oH4ACgkQd9zb2sjI SdEHJQ/+PvjlKb/+tCYk4/zNEu1AsKjWOlzF5dxT0uSCr+FsqMf9d58EwmqfUmgI OHAPq3ju+pjU0BHBqjmDcW9ksLdY+D7wY+qbqz+ROlvYD6P0NgZizasRYesMnMI0 D2X3WQINq2rJABUswC4uAnqLAGvlXSM+X2nsEtFW792zfZyOsnB6Lr3DfyGAOqqU rDaUdmBNy8mQ37X5FvE9t34Wv1Ds5815n+JkOj8QXv+F7cn03rDZrz5Wxhf2BuNc MSIPlfc0F+aRMMu1FAZ7m63f+Y/SyTBwC25+At408y4jlPhp0S9ktj1FMF8OcVrF E73x2fGKYgfSD4W7K0iG+hjO+i+vyid+852T6H5V6x040mlJG5QKW/yDJoFJerh7 eX0zMr4F1HNwaypnQYNfIeGAmdUNIeUvBb5f+2jk3t/jindxB9TCpLXl5SNugCfR vuwk/slJlwdhPcElvWeAvOc7DBpXBDUsfBjhQ24Lt/DDQvHunardBYmGjDzRBWKX kLf3D6EgdrOpMoyioeh2aZdTiFH9xRyTuHIHZrm6Gevu5XcU8Zw4GQ8eboUM6GtH bQUcw1SN5G0/HmOzRcXTmggbCggvwMnof0XhdxU6K/jTJnE0Ywus/9AtcYBJsL7j 0g8T8bzs6uLB7FwTFdbliE8uQFxauQFXm9qQ5GXIagMXvirqkDk= =BAJ1 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmY59RMACgkQYKtH/8kJ UifZXxAA20iI+MkJULdk0WFp+9pk6Kiym5K2PmL1KQGkYHORRs4PjvauqUD1OlYA 4KmHculOZnsaQMuGWLxMacQ33GLRN3Bf0+T0pVk8SBENRKb5102TaYpf4dL9PwLl gX1g6r7q7BgZNIspwld3TbMAsLGqNtBxPIuzQ4VG9xFc0ezCGyXJmWecp69uSiuK 9/RB4CbYeuqn6mSyXDxQVXnDsyDEGaqhD8xZRagaG6oDVp9jyQjDp1UlihsO9GI0 Qmv3kYEp/pHWj8AVNEcFJ/3VBQEzinPjhscdTeDp9f5nF/VG3OeSMg1t0oQ/P9TS DpiWBxAlr1195gpqQM2n49f0nCiw/epsxaMaohIIlELEnIpIfzTAEMTOcrsNDK/l esXRm05Leh9Mu3CSR6ESiIbFHK2BhQ0DGTQflaf4zrsm8xvd/fbMfFU3Y9cFFbRH COks1T54SKUqLiawWZ6v8WOACjLW/8OceVbuo1GUerThyVlWeVf6EbH4t9MSIekg hNbmy02tDtKf2t5amhOgyaVcu9RLzTh13ilEL/i7Q9+81FH03iv41xJbvmnIqIoP Bk5hD2Ci3A2x9SinFX6t5ycVaSyPKNQnwacx8BSkALC9iCIqbYTZJT6s+3D0LfZo 350aL9xLEkDLSZ2sz6oMhJdS7iG261HHyF3fJ75aX9jYAfUjFl8= =wiuz -----END PGP SIGNATURE----- Merge tag 'amlogic-arm64-dt-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt-late Amlogic ARM64 DT changes for v6.10: - New Boards: - MNT Reform 2 CM4 adapter with a BPI-CM4 Module - AV400 (Amlogic A5) - BA400 (Amlogic A4) - Initial Amlogic A4 & A5 support - MIPI DSI support for G12A, G12B & SM1 SoCs - Overlay for Khadas TS050 panel for the Khadas VIM3/VIM3L - Amlogic T7 reset controller * tag 'amlogic-arm64-dt-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: amlogic: Add Amlogic T7 reset controller arm64: dts: add support for A5 based Amlogic AV400 arm64: dts: add support for A4 based Amlogic BA400 dt-bindings: serial: amlogic,meson-uart: Add compatible string for A4 dt-bindings: arm: amlogic: add A5 support dt-bindings: arm: amlogic: add A4 support arm64: dts: meson: fix S4 power-controller node arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper arm64: meson: khadas-vim3l: add TS050 DSI panel overlay arm64: meson: g12-common: add the MIPI DSI nodes dt-bindings: arm: amlogic: Document the MNT Reform 2 CM4 adapter with a BPI-CM4 Module Link: https://lore.kernel.org/r/6030a450-fb4e-4e27-a5c3-6f4e0f326d9a@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
f89d22439f |
Samsung DTS ARM64 changes for v6.10, part two
Few changes exclusively for Google GS101:
1. Add HSI0 and HSI2 clock controllers (CMUs).
2. Add USB 3.1 Dual Role Device (DRD) support.
3. Add UFS (Universal Flash Storage) support.
4. Document bus clocks in pin controllers necessary for accessing
registers.
-----BEGIN PGP SIGNATURE-----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=xbpt
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=3I13
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.10, part two
Few changes exclusively for Google GS101:
1. Add HSI0 and HSI2 clock controllers (CMUs).
2. Add USB 3.1 Dual Role Device (DRD) support.
3. Add UFS (Universal Flash Storage) support.
4. Document bus clocks in pin controllers necessary for accessing
registers.
* tag 'samsung-dt64-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl
arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2
arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01]
arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive
arm64: dts: exynos: gs101: enable ufs, phy on oriole & define ufs regulator
arm64: dts: exynos: gs101: Add ufs and ufs-phy dt nodes
arm64: dts: exynos: gs101: Add the hsi2 sysreg node
dt-bindings: soc: google: exynos-sysreg: add dedicated hsi2 sysreg compatible
arm64: dts: exynos: gs101-oriole: enable USB on this board
arm64: dts: exynos: gs101: add USB & USB-phy nodes
arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller
arm64: dts: exynos: gs101: enable cmu-hsi0 clock controller
dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit
dt-bindings: clock: google,gs101-clock: add HSI0 clock management unit
Link: https://lore.kernel.org/r/20240504121233.7589-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
cbe240a8c5 |
Radxa Rock 3C board. More gpu+usb enablement on rk3588 boards as well
as two new iommus on rk3588. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmY389UQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgezsB/9c+E6x+Pn90no2zIioPVGU12nmwMuczv8o /4/ISTslNwkD9hC+GNhlMAsNkvuJpy9tJGO3S67oAXNq59X5AnzeIJFFgdYdmJB1 QYZ5rKyotFkRkgD+lF44QobuMKP1RK7dsITz8g7sbOL5/QP8fAQUIL2nDnzZCOLT Ef+++JxeSbzpvPqphci85+EpEefCRJLIgSWI4LIoRC3QTVToqGidKab25T9c/OSb ll6gU7qrKWy4rwP0aQ9kw4ouLpHIL5T/jd9VdSx3gfcPYrldu6WBWvhdBglbVOFo 92JZSpO2gO7LcUGnyq6kvNyV4rWW61OpPVofwXnM9KlFnJYxYgb3 =DIqH -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmY56pkACgkQYKtH/8kJ UidckhAAtfwpRmUdRF2s+BGdbtf9AXYanPFJG6BEjc+oM8B/pX8kJTbYBeuOqiWF bHbBzegz7Y0iyCtGrnRUGFd5KMHMCsPYrKcrgtjLiqy5+P/xOdRrcmjbGIaiUG+u 4F5Wx7r21L62d1pPpzRZU+8qSWjU1/vLAnz6zGdnFqAeE2l4MC5zfnoU90sdIpoS 3s1u3UPFK5RVjoU0j2ht05taeue0X6KjaPefDJsl8570eoUlA0kKDa9RN3CMDH0W d34wWDDtKaDctkYx3MRXlpW8hBvuWObhB+t3oCw/uo0doZe5f6TEnPKdT8NcMPcA SLvvQwmWozZAAgkfjYYZYjM8bC8JXgMGZSV4aQok3NgiESL3Oj2m6tBdhrZB1Xia snOqHnp+IpGB+6oUJcqoJDOAtNK2wf1LFBWtRmpAwZIPNVlousUcfHFN/PhCBHBM yo75zIserVdQ6ovMuGztFipNyZ43RlDcMAcF8xdWgNP0VrOHhmL7eQXaJiAX5pNv ulCIacUUjiWB8UCfvjZnYdCkujxtuhKfGlqfkNDep8JkiAxZdnalyDvb8jAsmeku Z/LNdGlFFgb5AmXkDft4ob3cNCDdoMcEqc64mL0J8+F4yVqdvtlc0LbKpgfStEye 4ec23CXOOIEKgNs8jZKwN7mJOGCG6Hochjhp0RpH5Yw0ALh53mk= =5mEg -----END PGP SIGNATURE----- Merge tag 'v6.10-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt Radxa Rock 3C board. More gpu+usb enablement on rk3588 boards as well as two new iommus on rk3588. * tag 'v6.10-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: add rk3588 pcie and php IOMMUs arm64: dts: rockchip: enable onboard spi flash for rock-3a arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5 arm64: dts: rockchip: Enable GPU on Orange Pi 5 arm64: dts: rockchip: enable GPU on khadas-edge2 arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO board arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute Module arm64: dts: rockchip: Add Radxa ROCK 3C dt-bindings: arm: rockchip: add Radxa ROCK 3C Link: https://lore.kernel.org/r/13810480.dW097sEU6C@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
8db93c212e |
mvebu dt64 for 6.10 (part 1)
Few dts fix for dt validation -----BEGIN PGP SIGNATURE----- iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCZjf6GgAKCRALBhiOFHI7 1RdOAJ9/2i3xP4EcGlOIOYEwMhRpegEuXQCgkFgWJM0kIHoJoWGuYSLw8ApEVlw= =USEH -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmY54LYACgkQYKtH/8kJ UiePqxAAta8+WuabDzrWtWrkqRr71E4/2i7YxcBy5uuFGG79dKSA5ZDxIhm/L6KI v3yqXNBRH7pT8w46iYeYR46PysCEXGy+i9hO0oDIFgIAp76xV+6O0W0XYSxFmh/c qEHm90ugKe1xhrjatcONwFW8BT7eFH+GoCHesXtW3nEe/aIsE6sKAUuvJ6QRtv8p XGrfZ/McvZc15M4h590iIgCH52jhCL4WnGYeXmQDZf8c9X6ewh1ElbYZkC9RHtoB m5tAGti/rpt/Hslqmv1FX8f92UUDUVncTYhdTz0kEuVjPBVyUqWTAKUZwlVPT6by 7tamLJrsNWAI7xgHAbvETR3OhdywSMIXtOTm4H04t2Vx+djb7RMK32TmAOeUcxfB xLjGDRyhnvVNZKlUO/Y2YSYEMkY9qfV8qIj/phTHJTufRE+Pol9N1nLqUD7wNZnH A4EMt26rm4MM04zEj7DxfPpg0yDsDdvhCSWti23DmTSToIVhXx5Yl596PsrNgSYh NMeTjDGE545HsoDUudD5gxZHUCApa6VmhifR0NcXT+EWCkcAxDSALEPLfENMOYMK Sj1KKVTB283Dc/Ink5IkJfyxHqBdxQufJ3EFkw5XlZFxR5ap4GQ1s0Q/FFPTc4O/ QfxNVRnMnG3cinwygVzKoczsy/MFKbk3GJudxN9MPRsrhoHjHbk= =DM9C -----END PGP SIGNATURE----- Merge tag 'mvebu-dt64-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt64 for 6.10 (part 1) Few dts fix for dt validation * tag 'mvebu-dt64-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit address arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cells arm64: dts: marvell: eDPU: drop redundant address/size-cells arm64: dts: marvell: cn9130-crb: drop unneeded "status" arm64: dts: marvell: cn9130-crb: drop wrong unit-addresses arm64: dts: marvell: cn9130-db: drop wrong unit-addresses arm64: dts: marvell: cn9131-db: drop unneeded flash address/size-cells arm64: dts: marvell: cn9130-db: drop unneeded flash address/size-cells arm64: dts: marvell: ap80x: fix IOMMU unit address Link: https://lore.kernel.org/r/87jzk8ndyy.fsf@BLaptop.bootlin.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
5549d1e399 |
One more Qualcomm Arm64 DeviceTree fix for v6.9
On ths SA8155P automotive platform, the wrong gpio controller is defined for the SD-card detect pin, which depending on probe ordering of things cause ethernet to be broken. The card detect pin reference is corrected to solve this problem. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmYtG44VHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FThQQAJvYr5LolVQPL4etFNL1OY/2xC2u gAahfgrXk/IDpJAsnJ2fgZn59A4zuNI+Efvh6iWbMkVhyKgdiTY/VI2Io5iSb0mq NmdWf2ll/aaM7C35Q7nsWB3bERN+GlLXKXJEugJrpct9uzlJYNkawZvyhquxBLc5 MAYXugaD7xzMVliYIyhova1+nzcMfgZld4PzyBDnpXz0GtN7ZyI0XaRa8FcYl5FV ESNHpsIrP0mxFWWJS9XOkBeEGNVN3DH1SS4p73AiJ0LFU4Y5DxmtqeBFPtPB7Gpe AR165n3bAr77gT3cQ8/uo1afCCSV07tSdxhy6ULn1HSiROBIJRZjpb2ly1asMhe6 DjviNcgxtpYHC1xh9ItTt7gojlD6ZdK26M5HoEn5+TyRZ6ZbeAZnw749maZ03mXu pTKUdTg5hgLgGmuiq5lupuKr3YltuXpRe9oGZJxAUlU3MHTxdG8+5oRLYha5qqd3 T8UBYT1fpxknuqAsye7rnE/fhok0QGGhsWTQwYnTh9t/5wbK9/wQwN4fuOwEGwtR 23LDZFMEksVW5sykYmwBFqQ5AzqfyaRU3sMyDA+Pn9XKGvtZ0McPmlrvmPTjQXsp 0q9XU14Ozd/D7mihATLKDija8wdlNRNK7p8U+vxuGzQBArNPWbL8onARpSjhzu7/ b+osswzeX6FbvY1E =+Jm6 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmY5xQoACgkQYKtH/8kJ UicIQg//YmxeExPEPpfbDtVd3rMaEgy7THE7QMxcRVE0daea4pF+aMD8cmYhGvhk XICNC+Qj8x3ZL2Q0efN5LqJK3fL2CiS5asU0dwhm69nuumygsznkiLW7Dj0zDNoG rZwbx3gPAhJ3dkg8V55ag2D58/1wq/LsmrcR/HSRxBZtOgJLknf3fHNlKP9EfiMO NuJPloUsRoosTetLpC5me3rE9REruGvBYhPPe5AOM2TYkEXttYAsbS0vVdaPxg9t 77O13ASuDLMMcU+mgOnLxzQUNP6+SQKVmkfQecgXS9dfaTs5Ru6x7T1ffbxRrh2r AUSh2TpImg9MU9Mz3345dhR8nriCUxw4KIiud5MF2y2ig4Ho5Kz9bkFiPNNTBkIH OLRRlRpy0YglbZWQ4dfDar0Klzkbe5IFrGZCdWQo/jzt+yNDjhX/ZDx6gqSLHf+T QBRjzjnWXVTz+s36b7vPW+PpmSeZWL0jMOMKekpIp7nXXYj9nHThebq7pETFq0SY e/bAdy/wNTsK51vcMh+5+acMDoXq/pqbhKZfN6QdO7i/ymbh+4mCEi2VcaiH3w3a i+wKBuMy0k5pkjNAWXkUSl1+RyT71+Sz1um4gBezKk5QqSXM1C6yqaX+LJ7IiqnD 8ev1T1CtrcXL3EajYTD7BeU0ryz1hs4Bumk3nOYsgKy/Rd6UcRA= =CCJj -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-fixes-for-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes One more Qualcomm Arm64 DeviceTree fix for v6.9 On ths SA8155P automotive platform, the wrong gpio controller is defined for the SD-card detect pin, which depending on probe ordering of things cause ethernet to be broken. The card detect pin reference is corrected to solve this problem. * tag 'qcom-arm64-fixes-for-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration Link: https://lore.kernel.org/r/20240427153817.1430382-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Krzysztof Kozlowski
|
4289937de5 |
arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit address
The Espressobin Ultra DTS includes Espressobin DTSI which defines ethernet-switch@1 node. The Ultra DTS overrides "reg" to 3, but that leaves still old unit address which conflicts with the new phy@1 node (W=1 dtc warning): armada-3720-espressobin.dtsi:148.29-203.4: Warning (unique_unit_address_if_enabled): /soc/internal-regs@d0000000/mdio@32004/ethernet-switch@1: duplicate unit-address (also used in node /soc/internal-regs@d0000000/mdio@32004/ethernet-phy@1) Fix this by deleting ethernet-switch@1 node and merging original node with code from Ultra DTS into new ethernet-switch@3. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> |
||
|
Krzysztof Kozlowski
|
34f5746a8c |
arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cells
Flash node uses single "partition" node to describe partitions, so remove deprecated address/size-cells properties to also fix dtc W=1 warnings: armada-3720-turris-mox.dts:218.10-255.4: Warning (avoid_unnecessary_addr_size): /soc/internal-regs@d0000000/spi@10600/flash@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> |
||
|
Krzysztof Kozlowski
|
04483d168d |
arm64: dts: marvell: eDPU: drop redundant address/size-cells
The ethernet-switch node does not have children with unit addresses, so address/size-cells are not really correct, as reported by dtc W=1 warning: armada-3720-eDPU.dts:26.19-60.4: Warning (avoid_unnecessary_addr_size): /soc/internal-regs@d0000000/mdio@32004/switch@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property This probably also fixes dtbs_check warning, but I could not find it, so not sure about that. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> |
||
Manikanta Guntupalli
|
b433768501 |
arm64: zynqmp: Add resets property for UART nodes
Add resets property for UART0 and UART1 nodes Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com> Link: https://lore.kernel.org/r/20240425062358.1347684-3-manikanta.guntupalli@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Krzysztof Kozlowski
|
0ea3e1d6f3 |
arm64: dts: qcom: pm6150: correct USB VBUS regulator compatible
The first part of the compatible of USB VBUS node misses ending quote,
thus we have one long compatible consisting of two compatible strings
leading to dtbs_check warnings:
sc7180-idp.dtb: usb-vbus-regulator@1100: compatible:0: 'qcom,pm6150-vbus-reg,\n qcom,pm8150b-vbus-reg' does not match '^[a-zA-Z0-9][a-zA-Z0-9,+\\-._/]+$'
sc7180-idp.dtb: /soc@0/spmi@c440000/pmic@0/usb-vbus-regulator@1100: failed to match any schema with compatible: ['qcom,pm6150-vbus-reg,\n qcom,pm8150b-vbus-reg']
Reported-by: Rob Herring <robh@kernel.org>
Fixes:
|
||
Chen-Yu Tsai
|
cd17bcbd2b |
arm64: dts: mediatek: mt8183-pico6: Fix bluetooth node
Bluetooth is not a random device connected to the MMC/SD controller. It
is function 2 of the SDIO device.
Fix the address of the bluetooth node. Also fix the node name and drop
the label.
Fixes:
|
||
Niklas Cassel
|
cd81d3a069 |
arm64: dts: rockchip: add rk3588 pcie and php IOMMUs
The mmu600_pcie is connected with the five PCIe controllers. The mmu600_php is connected with the USB3 controller, the GMAC controllers, and the SATA controllers. See 8.2 Block Diagram, in rk3588 TRM (Technical Reference Manual). The IOMMUs are disabled by default, as further patches are needed to program the SID/SSIDs in to the IOMMUs. iommu: Default domain type: Translated iommu: DMA domain TLB invalidation policy: strict mode arm-smmu-v3 fc900000.iommu: ias 48-bit, oas 48-bit (features 0x001c1eaf) arm-smmu-v3 fc900000.iommu: allocated 65536 entries for cmdq arm-smmu-v3 fc900000.iommu: allocated 32768 entries for evtq arm-smmu-v3 fc900000.iommu: msi_domain absent - falling back to wired irqs Additionally, the IOMMU correctly triggers an IOMMU fault when a PCIe device performs a write (since the device hasn't been assigned a SID/SSID): arm-smmu-v3 fc900000.iommu: event 0x02 received: arm-smmu-v3 fc900000.iommu: 0x0000010000000002 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 While this doesn't provide much value as is, having the devices as disabled in the device tree will allow developers to see that the rk3588 actually has IOMMUs on the SoC. Signed-off-by: Niklas Cassel <cassel@kernel.org> Link: https://lore.kernel.org/r/20240502140231.477049-2-cassel@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
Chukun Pan
|
6c7676a2d3 |
arm64: dts: rockchip: enable onboard spi flash for rock-3a
There is a mx25u12835f spi flash on this board, enable it. [ 2.525805] spi-nor spi4.0: mx25u12835f (16384 Kbytes) Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Link: https://lore.kernel.org/r/20240409120003.309358-2-amadeus@jmu.edu.cn Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
Jimmy Hon
|
c57d1a9702 |
arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5
Add support for using the Orange Pi 5 USB-C port for USB in OHCI, EHCI or XHCI mode. Displayport AltMode is not yet supported. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Link: https://lore.kernel.org/r/20240418035232.35344-2-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
|
Jimmy Hon
|
8beafb228f |
arm64: dts: rockchip: Enable GPU on Orange Pi 5
Enable the Mali GPU in the Orange Pi 5 Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Link: https://lore.kernel.org/r/20240425222913.1760-1-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
Muhammed Efe Cetin
|
4aae6cdd61 |
arm64: dts: rockchip: enable GPU on khadas-edge2
Enable the Mali GPU node on Khadas Edge 2. Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com> Link: https://lore.kernel.org/r/20240501142241.98554-1-efectn@6tel.net Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
Anand Moon
|
7676e12650 |
arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO board
Add the proper nodes to activate the USB 3.0 ports on the Edgeble NCM6A-IO board. Cc: Jagan Teki <jagan@edgeble.ai> Signed-off-by: Anand Moon <anand@edgeble.ai> Link: https://lore.kernel.org/r/20240502094246.4695-2-anand@edgeble.ai Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
|
Anand Moon
|
3cd1ed57ce |
arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute Module
On Edgeble Neural Compute Module add system-power-controller property to RK806 pmic so that these chips can power off the device. Cc: Jagan Teki <jagan@edgeble.ai> Signed-off-by: Anand Moon <anand@edgeble.ai> Link: https://lore.kernel.org/r/20240502094246.4695-1-anand@edgeble.ai Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
|
Chukun Pan
|
ee219017dd |
arm64: dts: rockchip: Add Radxa ROCK 3C
The Radxa ROCK 3C is a development board with the Rockchip RK3566 SoC. It has the following features: - 1/2/4GB LPDDR4 - 1x HDMI Type A - 1x PCIE 2.0 slot - 1x FAN connector - 3.5mm jack with mic - 1GbE RTL8211F Ethernet - 1x USB 3.0, 3x USB 2.0 - 40-pin expansion header - MicroSD card/eMMC socket - 16MB SPI NOR (gd25lq128d) - AP6256 or AIC8800 WiFi/BT Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Link: https://lore.kernel.org/r/20240428123618.72170-3-amadeus@jmu.edu.cn [dropped rk809-sound and not specified pmic sound properties] Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
André Draszik
|
4db286b0a2 |
arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl
The pinctrl instances hsi1, gsactrl, and gsacore need a clock for register access to work. Since we haven't implemented the relevant CMUs for the clocks required by these instances just add empty clocks for now so as to make the DT pass the validation checks. Once the clocks are implmented in the gs101 clock driver, these should be updated then. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240430-samsung-pinctrl-busclock-dts-v2-4-14fc988139dd@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
||
|
André Draszik
|
8120dc4656 |
arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2
This bus clock is needed for pinctrl register access to work. Add it. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240430-samsung-pinctrl-busclock-dts-v2-3-14fc988139dd@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
||
|
André Draszik
|
42e3f188b2 |
arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01]
This bus clock is needed for pinctrl register access to work. Add it. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240430-samsung-pinctrl-busclock-dts-v2-2-14fc988139dd@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
||
|
André Draszik
|
1665b303a0 |
arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive
This bus clock is needed for pinctrl register access to work. Add it. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240430-samsung-pinctrl-busclock-dts-v2-1-14fc988139dd@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
||
|
Arnd Bergmann
|
d10ee71072 |
TI K3 device tree updates for v6.10
Generic Cleanups/Fixes: - fixup of generated dtb imx219 overlay file names - Remove UART baud rate selection in device tree. - Use exact ranges for FSS. SoC specific Fixes/Features: AM625: - Add USB PHY2 region and usb phy control registers AM62A - Add USB PHY2 region and usb phy control registers, Disable USB LPM. - Add wave-512 video encoder/decoder support - Enable UHS mode for SD AM62P: - Disable ethernet by default - Add USB support AM654 - Serdes fixups - SDHCI fixups. AM67/j722s: - Disable ethernet by default - Add USB support AM68/J721s2: - Add main ESM range - Add support for SDR104 AM69/J784S4: - Add main ESM range - Enable support for UHS mode Board specific fixes/Features: AM625: - BeaglePlay: Fixes for wlan mmc-pwrseq and ethernet phy reset - phyboard-lyra: Add Audio codec, USB-C, increase CAN bit rate and enable ability to apply overlays - verdin: GPIO pinctrl fixups, Switch SD carddetect to GPIO, fixup memory to 2GB, and audio clock, PCIe reset GPIO hog, sleep-moci - lp-sk: Drop power button - sk: minor white space cleanup. AM64 - phyboard-electra: Increase CAN bit rate, enable overlay to enable GPIO fan AM65: - iot2050: Add icssg-prueth for PG1 AM67/j722s: - evm: Enable UHS support for SD card and eMMC support. AM69/J784s4: - evm/sk: Fix uart pins and pinctrl macro usage. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAmYyNEYACgkQ3bWEnRc2 JJ12Yg/+MhvnAD+DVLDSVVNlp6OHqs9sGFV76+M6CbZxehvZGwUtNl6qI/xBoN4C +eAHlgaoMe6WT8S8KMy5p/Zxlsem9+S7Dd72/A3P0rT7PKx6HgUyh60D3CmWHjuF a/9bd4vBRKr2oEiMhgpr7MIQ2J5OOLCfjUpn99NdNG/nXenpOHHsKpkUAUacbAcA BjLQzNSiL/Drm7A1su122MmemrBt72KSpL6753R+D9mU5HwoPcvBMd0o9UMAnGXy LpqXXXLVJX4QjN7/8rQ0sVzHwlA/N+CrBsmIu/gcqiHZ7rPltVfK/HWy/UETfGZf j/wIBQOgXIxOhyzAuDj0h+umuTWS86zjnD3FX7F+x66h/vERxsp+xo6hO7dsijax FeKB4YMRJrz/Yqwh/EyEGAZHUGFB0zGSFu0QBlvBvH+h4cx9PDnFXjIyrEsZ8GCE OnC0QUT2Mb1OoclZWepk+2DqFpjSEGSuLf1Tu2Fzj4onq+ECfkx95cS2EemY3sb6 Iyc8ddsVClLsIES+NidcTUYwfYMDlTjDuJUDAwPyl0fSIV0tl5jS7qxHU8ujYloC JAdevNL1CUgrjo27R/LxAopzGX7sQR3bneAEC4Lfzp9ER4en9f9RyFAaOIvFeU66 5AiSbRnBj9RKMnbBFhKWnUA2lgC7Xs/DPkS7YKK/ttjD/Bfpa9U= =PUtH -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmYzkGoACgkQYKtH/8kJ UieFuA/8DTiWC4mJU/tsMtrXYu8xWTKgn55yyE87fNkOq3UrsZuolb05eM4thsRl nfrUXDj8p7H9Y/PKF20HidGqjxRMKmEmltbadYM+uFtQ1LzB4rFglzZ3ZvjQ47la FTLGCkIgygPT51zWXiPtJHwEs3/lN5C+TcrqtEUcCDYWUpBupB5GwrTrGvIf/f/J mpSwTDJplqdRED/ig6K5lo4GmqTdKNRcv+PQ1VyfCyxCmv/JcR4cFN8gOs4tJeaV xqQo5i5zbiaViNMHRr0L0mqnwHix99F0GdyVIo0HH+M5gABGuPvPzW0tQ2isn5K4 BGc+9PEaqO39FUsxTsoCtZi5P2DdxififDXzvrVLb2G6H7Q5JihQ9ZMrSis7nQxB ih0LgwpxDL1lTxPIQzYttLpdBPqC2NLd9GJDD7Yi1eAMfiZKmKcz3PjjnnfQcfM4 i91UoUzDpzVw49S6hSg/mgRy0zH+92fj0yvXT45xQXwkmutPqlRS4cwy815lVBsA LednschDYoMHoPXPwPP/16sgQFr4XtVH3Uf/1Hrfc/b5WyW5aqixXossFnMAYhr3 ZObd4ImgeiVB6y6neUdq5+pgqKGQ6Ysy9TPFfBFVZ5dwGLO/Jz66xjMm5EnFHiXT EACjYpUD2pbpoizzyeCMixn/R6CKJTUumqSaCfxad8Zv8oe2VBI= =OTpo -----END PGP SIGNATURE----- Merge tag 'ti-k3-dt-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.10 Generic Cleanups/Fixes: - fixup of generated dtb imx219 overlay file names - Remove UART baud rate selection in device tree. - Use exact ranges for FSS. SoC specific Fixes/Features: AM625: - Add USB PHY2 region and usb phy control registers AM62A - Add USB PHY2 region and usb phy control registers, Disable USB LPM. - Add wave-512 video encoder/decoder support - Enable UHS mode for SD AM62P: - Disable ethernet by default - Add USB support AM654 - Serdes fixups - SDHCI fixups. AM67/j722s: - Disable ethernet by default - Add USB support AM68/J721s2: - Add main ESM range - Add support for SDR104 AM69/J784S4: - Add main ESM range - Enable support for UHS mode Board specific fixes/Features: AM625: - BeaglePlay: Fixes for wlan mmc-pwrseq and ethernet phy reset - phyboard-lyra: Add Audio codec, USB-C, increase CAN bit rate and enable ability to apply overlays - verdin: GPIO pinctrl fixups, Switch SD carddetect to GPIO, fixup memory to 2GB, and audio clock, PCIe reset GPIO hog, sleep-moci - lp-sk: Drop power button - sk: minor white space cleanup. AM64 - phyboard-electra: Increase CAN bit rate, enable overlay to enable GPIO fan AM65: - iot2050: Add icssg-prueth for PG1 AM67/j722s: - evm: Enable UHS support for SD card and eMMC support. AM69/J784s4: - evm/sk: Fix uart pins and pinctrl macro usage. * tag 'ti-k3-dt-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (48 commits) arm64: dts: ti: Fix csi2-dual-imx219 dtb names arm64: dts: ti: k3-am625-beagleplay: Fix Ethernet PHY RESET GPIOs arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add USB-C arm64: dts: ti: k3-j784s4: Add main esm address range arm64: dts: ti: k3-j721s2: Add main esm address range arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci arm64: dts: ti: k3-am62-verdin: replace sleep-moci hog with regulator arm64: dts: ti: k3-j722s-evm: Enable UHS support for MMCSD arm64: dts: ti: k3-j784s4-main: Enable support for UHS mode arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode arm64: dts: ti: k3-am62a: Enable UHS mode support for SD cards arm64: dts: ti: k3-am65-main: Remove unused properties in sdhci nodes arm64: dts: ti: k3-am65-main: Fix sdhci node properties arm64: dts: ti: Enable overlays for the am625-phyboard-lyra arm64: dts: ti: am64-phyboard-electra: Add overlay to enable a GPIO fan arm64: dts: ti: k3-am62a-main: Add Wave5 Video Encoder/Decoder Node arm64: dts: ti: k3-am69-sk: Fix UART pin type and macro type arm64: dts: ti: k3-j784s4-evm: Fix UART pin type and macro type arm64: dts: ti: k3-am62a: Disable USB LPM arm64: dts: ti: k3-am62p: add the USB sub-system ... Link: https://lore.kernel.org/r/20240501124319.ake5j2oc5pbnn5nb@contour Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Rob Herring
|
5c04a5b065 |
arm64: dts: Add/fix /memory node unit-addresses
'/memory' nodes always have a 'reg' property, and therefore should have a unit-address with just plain hex (i.e. no commas). Fix all the arm64 '/memory' nodes. It's possible that some bootloader depends on /memory (arm32 ATAG to DT code does for example). If so, the memory node should be commented with that requirement. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Chanho Min <chanho.min@lge.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240430191856.874600-2-robh@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |