Add a new variant of bpf_d_path() named bpf_path_d_path() which takes
the form of a BPF kfunc and enforces KF_TRUSTED_ARGS semantics onto
its arguments.
This new d_path() based BPF kfunc variant is intended to address the
legacy bpf_d_path() BPF helper's susceptability to memory corruption
issues [0, 1, 2] by ensuring to only operate on supplied arguments
which are deemed trusted by the BPF verifier. Typically, this means
that only pointers to a struct path which have been referenced counted
may be supplied.
In addition to the new bpf_path_d_path() BPF kfunc, we also add a
KF_ACQUIRE based BPF kfunc bpf_get_task_exe_file() and KF_RELEASE
counterpart BPF kfunc bpf_put_file(). This is so that the new
bpf_path_d_path() BPF kfunc can be used more flexibily from within the
context of a BPF LSM program. It's rather common to ascertain the
backing executable file for the calling process by performing the
following walk current->mm->exe_file while instrumenting a given
operation from the context of the BPF LSM program. However, walking
current->mm->exe_file directly is never deemed to be OK, and doing so
from both inside and outside of BPF LSM program context should be
considered as a bug. Using bpf_get_task_exe_file() and in turn
bpf_put_file() will allow BPF LSM programs to reliably get and put
references to current->mm->exe_file.
As of now, all the newly introduced BPF kfuncs within this patch are
limited to BPF LSM program types. These can be either sleepable or
non-sleepable variants of BPF LSM program types.
[0] https://lore.kernel.org/bpf/CAG48ez0ppjcT=QxU-jtCUfb5xQb3mLr=5FcwddF_VKfEBPs_Dg@mail.gmail.com/
[1] https://lore.kernel.org/bpf/20230606181714.532998-1-jolsa@kernel.org/
[2] https://lore.kernel.org/bpf/20220219113744.1852259-1-memxor@gmail.com/
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240731110833.1834742-2-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZem4/wAKCRCRxhvAZXjc
opnBAQCaQWwxjT0VLHebPniw6tel/KYlZ9jH9kBQwLrk1pembwEA+BsCY2C8YS4a
75v9jOPxr+Z8j1SjxwwubcONPyqYXwQ=
=+Wa3
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.9.pidfd' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pdfd updates from Christian Brauner:
- Until now pidfds could only be created for thread-group leaders but
not for threads. There was no technical reason for this. We simply
had no users that needed support for this. Now we do have users that
need support for this.
This introduces a new PIDFD_THREAD flag for pidfd_open(). If that
flag is set pidfd_open() creates a pidfd that refers to a specific
thread.
In addition, we now allow clone() and clone3() to be called with
CLONE_PIDFD | CLONE_THREAD which wasn't possible before.
A pidfd that refers to an individual thread differs from a pidfd that
refers to a thread-group leader:
(1) Pidfds are pollable. A task may poll a pidfd and get notified
when the task has exited.
For thread-group leader pidfds the polling task is woken if the
thread-group is empty. In other words, if the thread-group
leader task exits when there are still threads alive in its
thread-group the polling task will not be woken when the
thread-group leader exits but rather when the last thread in the
thread-group exits.
For thread-specific pidfds the polling task is woken if the
thread exits.
(2) Passing a thread-group leader pidfd to pidfd_send_signal() will
generate thread-group directed signals like kill(2) does.
Passing a thread-specific pidfd to pidfd_send_signal() will
generate thread-specific signals like tgkill(2) does.
The default scope of the signal is thus determined by the type
of the pidfd.
Since use-cases exist where the default scope of the provided
pidfd needs to be overriden the following flags are added to
pidfd_send_signal():
- PIDFD_SIGNAL_THREAD
Send a thread-specific signal.
- PIDFD_SIGNAL_THREAD_GROUP
Send a thread-group directed signal.
- PIDFD_SIGNAL_PROCESS_GROUP
Send a process-group directed signal.
The scope change will only work if the struct pid is actually
used for this scope.
For example, in order to send a thread-group directed signal the
provided pidfd must be used as a thread-group leader and
similarly for PIDFD_SIGNAL_PROCESS_GROUP the struct pid must be
used as a process group leader.
- Move pidfds from the anonymous inode infrastructure to a tiny pseudo
filesystem. This will unblock further work that we weren't able to do
simply because of the very justified limitations of anonymous inodes.
Moving pidfds to a tiny pseudo filesystem allows for statx on pidfds
to become useful for the first time. They can now be compared by
inode number which are unique for the system lifetime.
Instead of stashing struct pid in file->private_data we can now stash
it in inode->i_private. This makes it possible to introduce concepts
that operate on a process once all file descriptors have been closed.
A concrete example is kill-on-last-close. Another side-effect is that
file->private_data is now freed up for per-file options for pidfds.
Now, each struct pid will refer to a different inode but the same
struct pid will refer to the same inode if it's opened multiple
times. In contrast to now where each struct pid refers to the same
inode.
The tiny pseudo filesystem is not visible anywhere in userspace
exactly like e.g., pipefs and sockfs. There's no lookup, there's no
complex inode operations, nothing. Dentries and inodes are always
deleted when the last pidfd is closed.
We allocate a new inode and dentry for each struct pid and we reuse
that inode and dentry for all pidfds that refer to the same struct
pid. The code is entirely optional and fairly small. If it's not
selected we fallback to anonymous inodes. Heavily inspired by nsfs.
The dentry and inode allocation mechanism is moved into generic
infrastructure that is now shared between nsfs and pidfs. The
path_from_stashed() helper must be provided with a stashing location,
an inode number, a mount, and the private data that is supposed to be
used and it will provide a path that can be passed to dentry_open().
The helper will try retrieve an existing dentry from the provided
stashing location. If a valid dentry is found it is reused. If not a
new one is allocated and we try to stash it in the provided location.
If this fails we retry until we either find an existing dentry or the
newly allocated dentry could be stashed. Subsequent openers of the
same namespace or task are then able to reuse it.
- Currently it is only possible to get notified when a task has exited,
i.e., become a zombie and userspace gets notified with EPOLLIN. We
now also support waiting until the task has been reaped, notifying
userspace with EPOLLHUP.
- Ensure that ESRCH is reported for getfd if a task is exiting instead
of the confusing EBADF.
- Various smaller cleanups to pidfd functions.
* tag 'vfs-6.9.pidfd' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (23 commits)
libfs: improve path_from_stashed()
libfs: add stashed_dentry_prune()
libfs: improve path_from_stashed() helper
pidfs: convert to path_from_stashed() helper
nsfs: convert to path_from_stashed() helper
libfs: add path_from_stashed()
pidfd: add pidfs
pidfd: move struct pidfd_fops
pidfd: allow to override signal scope in pidfd_send_signal()
pidfd: change pidfd_send_signal() to respect PIDFD_THREAD
signal: fill in si_code in prepare_kill_siginfo()
selftests: add ESRCH tests for pidfd_getfd()
pidfd: getfd should always report ESRCH if a task is exiting
pidfd: clone: allow CLONE_THREAD | CLONE_PIDFD together
pidfd: exit: kill the no longer used thread_group_exited()
pidfd: change do_notify_pidfd() to use __wake_up(poll_to_key(EPOLLIN))
pid: kill the obsolete PIDTYPE_PID code in transfer_pid()
pidfd: kill the no longer needed do_notify_pidfd() in de_thread()
pidfd_poll: report POLLHUP when pid_task() == NULL
pidfd: implement PIDFD_THREAD flag for pidfd_open()
...
Move the pidfd file operations over to their own file in preparation of
implementing pidfs and to isolate them from other mostly unrelated
functionality in other files.
Link: https://lore.kernel.org/r/20240213-vfs-pidfd_fs-v1-1-f863f58cfce1@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
The replacement, NTFS3, was merged over two years ago. It is now time to
remove the original from the tree as it is the last user of several APIs,
and it is not worth changing.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240115072025.2071931-1-willy@infradead.org
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Acked-by: Dave Chinner <david@fromorbit.com>
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZabMrQAKCRCRxhvAZXjc
ovnUAQDgCOonb1tjtTvC8s8IMDUEoaVYZI91KVfsZQSJYN1sdQD+KfJmX1BhJnWG
l0cEffGfnWGXMZkZqDgLPHUIPzFrmws=
=1b3j
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8.netfs' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"This extends the netfs helper library that network filesystems can use
to replace their own implementations. Both afs and 9p are ported. cifs
is ready as well but the patches are way bigger and will be routed
separately once this is merged. That will remove lots of code as well.
The overal goal is to get high-level I/O and knowledge of the page
cache and ouf of the filesystem drivers. This includes knowledge about
the existence of pages and folios
The pull request converts afs and 9p. This removes about 800 lines of
code from afs and 300 from 9p. For 9p it is now possible to do writes
in larger than a page chunks. Additionally, multipage folio support
can be turned on for 9p. Separate patches exist for cifs removing
another 2000+ lines. I've included detailed information in the
individual pulls I took.
Summary:
- Add NFS-style (and Ceph-style) locking around DIO vs buffered I/O
calls to prevent these from happening at the same time.
- Support for direct and unbuffered I/O.
- Support for write-through caching in the page cache.
- O_*SYNC and RWF_*SYNC writes use write-through rather than writing
to the page cache and then flushing afterwards.
- Support for write-streaming.
- Support for write grouping.
- Skip reads for which the server could only return zeros or EOF.
- The fscache module is now part of the netfs library and the
corresponding maintainer entry is updated.
- Some helpers from the fscache subsystem are renamed to mark them as
belonging to the netfs library.
- Follow-up fixes for the netfs library.
- Follow-up fixes for the 9p conversion"
* tag 'vfs-6.8.netfs' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (50 commits)
netfs: Fix wrong #ifdef hiding wait
cachefiles: Fix signed/unsigned mixup
netfs: Fix the loop that unmarks folios after writing to the cache
netfs: Fix interaction between write-streaming and cachefiles culling
netfs: Count DIO writes
netfs: Mark netfs_unbuffered_write_iter_locked() static
netfs: Fix proc/fs/fscache symlink to point to "netfs" not "../netfs"
netfs: Rearrange netfs_io_subrequest to put request pointer first
9p: Use length of data written to the server in preference to error
9p: Do a couple of cleanups
9p: Fix initialisation of netfs_inode for 9p
cachefiles: Fix __cachefiles_prepare_write()
9p: Use netfslib read/write_iter
afs: Use the netfs write helpers
netfs: Export the netfs_sreq tracepoint
netfs: Optimise away reads above the point at which there can be no data
netfs: Implement a write-through caching option
netfs: Provide a launder_folio implementation
netfs: Provide a writepages implementation
netfs, cachefiles: Pass upper bound length to allow expansion
...
There's a problem with dependencies between netfslib and fscache as each
wants to access some functions of the other. Deal with this by moving
fs/fscache/* into fs/netfs/ and renaming those files to begin with
"fscache-".
For the moment, the moved files are changed as little as possible and an
fscache module is still built. A subsequent patch will integrate them.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Christian Brauner <christian@brauner.io>
cc: linux-fsdevel@vger.kernel.org
cc: linux-cachefs@redhat.com
In preparation for factoring out some backing file io helpers from
overlayfs, move backing_file_open() into a new file fs/backing-file.c
and header.
Add a MAINTAINERS entry for stackable filesystems and add a Kconfig
FS_STACK which stackable filesystems need to select.
For now, the backing_file struct, the backing_file alloc/free functions
and the backing_file_real_path() accessor remain internal to file_table.c.
We may change that in the future.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Initially forked from drivers/md/bcache, bcachefs is a new copy-on-write
filesystem with every feature you could possibly want.
Website: https://bcachefs.org
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a new config option that controls building the buffer_head code, and
select it from all file systems and stacking drivers that need it.
For the block device nodes and alternative iomap based buffered I/O path
is provided when buffer_head support is not enabled, and iomap needs a
a small tweak to define the IOMAP_F_BUFFER_HEAD flag to 0 to not call
into the buffer_head code when it doesn't exist.
Otherwise this is just Kconfig and ifdef changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230801172201.1923299-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=zP4Y
-----END PGP SIGNATURE-----
Merge tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Various cleanups all around (Irvin, Chaitanya, Christophe)
- Better struct packing (Christophe JAILLET)
- Reduce controller error logs for optional commands (Keith)
- Support for >=64KiB block sizes (Daniel Gomez)
- Fabrics fixes and code organization (Max, Chaitanya, Daniel
Wagner)
- bcache updates via Coly:
- Fix a race at init time (Mingzhe Zou)
- Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)
- use page pinning in the block layer for dio (David)
- convert old block dio code to page pinning (David, Christoph)
- cleanups for pktcdvd (Andy)
- cleanups for rnbd (Guoqing)
- use the unchecked __bio_add_page() for the initial single page
additions (Johannes)
- fix overflows in the Amiga partition handling code (Michael)
- improve mq-deadline zoned device support (Bart)
- keep passthrough requests out of the IO schedulers (Christoph, Ming)
- improve support for flush requests, making them less special to deal
with (Christoph)
- add bdev holder ops and shutdown methods (Christoph)
- fix the name_to_dev_t() situation and use cases (Christoph)
- decouple the block open flags from fmode_t (Christoph)
- ublk updates and cleanups, including adding user copy support (Ming)
- BFQ sanity checking (Bart)
- convert brd from radix to xarray (Pankaj)
- constify various structures (Thomas, Ivan)
- more fine grained persistent reservation ioctl capability checks
(Jingbo)
- misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
Jordy, Li, Min, Yu, Zhong, Waiman)
* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
scsi/sg: don't grab scsi host module reference
ext4: Fix warning in blkdev_put()
block: don't return -EINVAL for not found names in devt_from_devname
cdrom: Fix spectre-v1 gadget
block: Improve kernel-doc headers
blk-mq: don't insert passthrough request into sw queue
bsg: make bsg_class a static const structure
ublk: make ublk_chr_class a static const structure
aoe: make aoe_class a static const structure
block/rnbd: make all 'class' structures const
block: fix the exclusive open mask in disk_scan_partitions
block: add overflow checks for Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
block: fix signed int overflow in Amiga partition support
block: add capacity validation in bdev_add_partition()
block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
block: disallow Persistent Reservation on partitions
reiserfs: fix blkdev_put() warning from release_journal_dev()
block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
block: document the holder argument to blkdev_get_by_path
...
Move CIFS/SMB3 related client and server files (cifs.ko and ksmbd.ko
and helper modules) to new fs/smb subdirectory:
fs/cifs --> fs/smb/client
fs/ksmbd --> fs/smb/server
fs/smbfs_common --> fs/smb/common
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
def_blk_fops always returns -ENODEV, which dosn't match the return value
of a non-existing block device with CONFIG_BLOCK, which is -ENXIO.
Just remove the extra implementation and fall back to the default
no_open_fops that always returns -ENXIO.
Fixes: 9361401eb7 ("[PATCH] BLOCK: Make it possible to disable the block layer [try #6]")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230508144405.41792-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Make stub data pages configurable
- Make it harder to mix user and kernel code by accident
-----BEGIN PGP SIGNATURE-----
iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAmRSslcWHHJpY2hhcmRA
c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wVbGEADWL/4rcVNqaD/b9V3bUXDkNhpG
81Jc9fXcx3OXV87GsxfadiQI05UaOhTAMWJlsdKUF0/IW5tSQSZc0QcDNxTs6aS1
NDkWvjk8s8OpbqdmV0cNKFmaeginrH4AuASajvNleU0BxX4ziqw6BPadih+wGVGz
iVEd/M5YH2yet33pvD7Wzh3KZOPlo2OOKBqXzE6Snc3yoOiIfN95U8Cl23nxzMI4
F235LS5m+4+GWIMkYs6+hlWEa8SxSnsH/beQJxAybtetSHRxsDXOHlEpDI9olxYI
+OFNqsFLDyhyjib2Snwt8HMES9VmMfUUwT7ZK1cChXN8Quix3lXAyz6rpocmdnL/
X1tzqWb1bz+yqrVRjtN3AGbcav+sQp4UWXsoExVsiz3lzaXfrbPvRZFucH2+SStK
Wadyy2v2rHZKNq9sDLUBf5GJ0C4LrBAyT15ADim2L5/K7pZyI7AKSPcdU0Xc8m5y
kMswml7FLaI+gsuKOBl7jySaoNDiVZFvQjsxd1+hn5cBNOcyBSt2rSErDw3geJgn
pFzVkLtklfxMpHMm+bwXONBZMrXOBPNgo0gSkVrCVzO68x6j/MaBGLFazSqOKxbc
UcVULhiomjIae4AcTomzOQx7oM1Xs3XuPo0x2RgJ3gMlCCZKoDNuqDgB3ZmPP/gq
cbbHHveXEx7aMOPz0A==
=Qb+I
-----END PGP SIGNATURE-----
Merge tag 'uml-for-linus-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull uml updates from Richard Weinberger:
- Make stub data pages configurable
- Make it harder to mix user and kernel code by accident
* tag 'uml-for-linus-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: make stub data pages size tweakable
um: prevent user code in modules
um: further clean up user_syms
um: don't export printf()
um: hostfs: define our own API boundary
um: add __weak for exported functions
Instead of exporting the set of functions provided by
glibc that are needed for hostfs_user.c, just build that
into the kernel image whenever hostfs is built, and then
export _those_ functions cleanly, to be independent of
the libc implementation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
'obj-$(CONFIG_SYSCTL) += sysctls.o' must be moved after "obj-y :=",
or it won't be built as it is overwrited.
Note that there is nothing that is going to break by linking
sysctl.o later, we were just being way to cautious and patches
have been updated to reflect these considerations and sent for
stable as well with the whole "base" stuff needing to be linked
prior to child sysctl tables that use that directory. All of
the kernel sysctl APIs always share the same directory, and races
against using it should end up re-using the same single created
directory.
And so something we can do eventually is do away with all the base stuff.
For now it's fine, it's not creating an issue. It is just a bit pedantic
and careful.
Fixes: ab171b952c ("fs: move namespace sysctls and declare fs base directory")
Cc: stable@vger.kernel.org # v5.17
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[mcgrof: enhanced commit log for stable criteria and clarify base stuff ]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
-----BEGIN PGP SIGNATURE-----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=IU45
-----END PGP SIGNATURE-----
Merge tag 'for-6.3/dio-2023-02-16' of git://git.kernel.dk/linux
Pull legacy dio update from Jens Axboe:
"We only have a few file systems that use the old dio code, make them
select it rather than build it unconditionally"
* tag 'for-6.3/dio-2023-02-16' of git://git.kernel.dk/linux:
fs: build the legacy direct I/O code conditionally
fs: move sb_init_dio_done_wq out of direct-io.c
Add a new LEGACY_DIRECT_IO config symbol that is only selected by the
file systems that still use the legacy blockdev_direct_IO code, so that
kernels without support for those file systems don't need to build the
code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230125065839.191256-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that we converted everything to just rely on struct mnt_idmap move it all
into a separate file. This ensure that no code can poke around in struct
mnt_idmap without any dedicated helpers and makes it easier to extend it in the
future. Filesystems will now not be able to conflate mount and filesystem
idmappings as they are two distinct types and require distinct helpers that
cannot be used interchangeably. We are now also able to extend struct mnt_idmap
as we see fit.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
In commit 19e8b701e2 ("a.out: Stop building a.out/osf1 support on
alpha and m68k") the last users of a.out were disabled.
As nothing has turned up to cause this change to be reverted, let's
remove the code implementing a.out support as well.
There may be userspace users of the uapi bits left so the uapi
headers have been left untouched.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> # arm defconfigs
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/871qrx3hq3.fsf@email.froward.int.ebiederm.org
In preparation for splitting io_uring up a bit, move it into its own
top level directory. It didn't really belong in fs/ anyway, as it's
not a file system only API.
This adds io_uring/ and moves the core files in there, and updates the
MAINTAINERS file for the new location.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
previous CONFIG_UNICODE. It is -rc material since we don't want to
expose the former symbol on 5.17.
This has been living on linux-next for the past week.
-----BEGIN PGP SIGNATURE-----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=YVNN
-----END PGP SIGNATURE-----
Merge tag 'unicode-for-next-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode
Pull unicode cleanup from Gabriel Krisman Bertazi:
"A fix from Christoph Hellwig merging the CONFIG_UNICODE_UTF8_DATA into
the previous CONFIG_UNICODE. It is -rc material since we don't want to
expose the former symbol on 5.17.
This has been living on linux-next for the past week"
* tag 'unicode-for-next-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
unicode: clean up the Kconfig symbol confusion
This moves the namespace sysctls to its own file as part of the
kernel/sysctl.c spring cleaning
Since we have now removed all sysctls for "fs", we now have to declare
it on the filesystem code, we do that using the new helper, which
reduces boiler plate code.
We rename init_fs_shared_sysctls() to init_fs_sysctls() to reflect that
now fs/sysctls.c is taking on the burden of being the first to register
the base directory as well.
Lastly, since init code will load in the order in which we link it we
have to move the sysctl code to be linked in early, so that its early
init routine runs prior to other fs code. This way, other filesystem
code can register their own sysctls using the helpers after this:
* register_sysctl_init()
* register_sysctl()
Link: https://lkml.kernel.org/r/20211129211943.640266-3-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
So move sysctls which are shared between filesystems into a common file
outside of kernel/sysctl.c.
Link: https://lkml.kernel.org/r/20211129205548.605569-6-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Turn the CONFIG_UNICODE symbol into a tristate that generates some always
built in code and remove the confusing CONFIG_UNICODE_UTF8_DATA symbol.
Note that a lot of the IS_ENABLED() checks could be turned from cpp
statements into normal ifs, but this change is intended to be fairly
mechanic, so that should be cleaned up later.
Fixes: 2b3d047870 ("unicode: Add utf8-data module")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
-----BEGIN PGP SIGNATURE-----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=Y9tc
-----END PGP SIGNATURE-----
Merge tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull smbfs updates from Steve French:
"cifs/smb3 updates:
- DFS reconnect fix
- begin creating common headers for server and client
- rename the cifs_common directory to smbfs_common to be more
consistent ie change use of the name cifs to smb (smb3 or smbfs is
more accurate, as the very old cifs dialect has long been
superseded by smb3 dialects).
In the future we can rename the fs/cifs directory to fs/smbfs.
This does not include the set of multichannel fixes nor the two
deferred close fixes (they are still being reviewed and tested)"
* tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: properly invalidate cached root handle when closing it
cifs: move SMB FSCTL definitions to common code
cifs: rename cifs_common to smbfs_common
cifs: update FSCTL definitions
-----BEGIN PGP SIGNATURE-----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=1ajD
-----END PGP SIGNATURE-----
Merge tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph:
- fix nvmet command set reporting for passthrough controllers (Adam Manzanares)
- update a MAINTAINERS email address (Chaitanya Kulkarni)
- set QUEUE_FLAG_NOWAIT for nvme-multipth (me)
- handle errors from add_disk() (Luis Chamberlain)
- update the keep alive interval when kato is modified (Tatsuya Sasaki)
- fix a buffer overrun in nvmet_subsys_attr_serial (Hannes Reinecke)
- do not reset transport on data digest errors in nvme-tcp (Daniel Wagner)
- only call synchronize_srcu when clearing current path (Daniel Wagner)
- revalidate paths during rescan (Hannes Reinecke)
- Split out the fs/block_dev into block/fops.c and block/bdev.c, which
has been long overdue. Do this now before -rc1, to avoid annoying
conflicts due to this (Christoph)
- blk-throtl use-after-free fix (Li)
- Improve plug depth for multi-device plugs, greatly increasing md
resync performance (Song)
- blkdev_show() locking fix (Tetsuo)
- n64cart error check fix (Yang)
* tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
n64cart: fix return value check in n64cart_probe()
blk-mq: allow 4x BLK_MAX_REQUEST_COUNT at blk_plug for multiple_queues
block: move fs/block_dev.c to block/bdev.c
block: split out operations on block special files
blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()
block: genhd: don't call blkdev_show() with major_names_lock held
nvme: update MAINTAINERS email address
nvme: add error handling support for add_disk()
nvme: only call synchronize_srcu when clearing current path
nvme: update keep alive interval when kato is modified
nvme-tcp: Do not reset transport on data digest errors
nvmet: fixup buffer overrun in nvmet_subsys_attr_serial()
nvmet: return bool from nvmet_passthru_ctrl and nvmet_is_passthru_req
nvmet: looks at the passthrough controller when initializing CAP
nvme: move nvme_multi_css into nvme.h
nvme-multipath: revalidate paths during rescan
nvme-multipath: set QUEUE_FLAG_NOWAIT
As we move to common code between client and server, we have
been asked to make the names less confusing, and refer less
to "cifs" and more to words which include "smb" instead to
e.g. "smbfs" for the client (we already have "ksmbd" for the
kernel server, and "smbd" for the user space Samba daemon).
So to be more consistent in the naming of common code between
client and server and reduce the risk of merge conflicts as
more common code is added - rename "cifs_common" to
"smbfs_common" (in future releases we also will rename
the fs/cifs directory to fs/smbfs)
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Merge NTFSv3 filesystem from Konstantin Komarov:
"This patch adds NTFS Read-Write driver to fs/ntfs3.
Having decades of expertise in commercial file systems development and
huge test coverage, we at Paragon Software GmbH want to make our
contribution to the Open Source Community by providing implementation
of NTFS Read-Write driver for the Linux Kernel.
This is fully functional NTFS Read-Write driver. Current version works
with NTFS (including v3.1) and normal/compressed/sparse files and
supports journal replaying.
We plan to support this version after the codebase once merged, and
add new features and fix bugs. For example, full journaling support
over JBD will be added in later updates"
Link: https://lore.kernel.org/lkml/20210729134943.778917-1-almaz.alexandrovich@paragon-software.com/
Link: https://lore.kernel.org/lkml/aa4aa155-b9b2-9099-b7a2-349d8d9d8fbd@paragon-software.com/
* git://github.com/Paragon-Software-Group/linux-ntfs3: (35 commits)
fs/ntfs3: Change how module init/info messages are displayed
fs/ntfs3: Remove GPL boilerplates from decompress lib files
fs/ntfs3: Remove unnecessary condition checking from ntfs_file_read_iter
fs/ntfs3: Fix integer overflow in ni_fiemap with fiemap_prep()
fs/ntfs3: Restyle comments to better align with kernel-doc
fs/ntfs3: Rework file operations
fs/ntfs3: Remove fat ioctl's from ntfs3 driver for now
fs/ntfs3: Restyle comments to better align with kernel-doc
fs/ntfs3: Fix error handling in indx_insert_into_root()
fs/ntfs3: Potential NULL dereference in hdr_find_split()
fs/ntfs3: Fix error code in indx_add_allocate()
fs/ntfs3: fix an error code in ntfs_get_acl_ex()
fs/ntfs3: add checks for allocation failure
fs/ntfs3: Use kcalloc/kmalloc_array over kzalloc/kmalloc
fs/ntfs3: Do not use driver own alloc wrappers
fs/ntfs3: Use kernel ALIGN macros over driver specific
fs/ntfs3: Restyle comment block in ni_parse_reparse()
fs/ntfs3: Remove unused including <linux/version.h>
fs/ntfs3: Fix fall-through warnings for Clang
fs/ntfs3: Fix one none utf8 char in source file
...
-----BEGIN PGP SIGNATURE-----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=d9f7
-----END PGP SIGNATURE-----
Merge tag '5.15-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client updates from Steve French:
"Eleven cifs/smb3 client fixes:
- mostly restructuring to allow disabling less secure algorithms
(this will allow eventual removing rc4 and md4 from general use in
the kernel)
- four fixes, including two for stable
- enable r/w support with fscache and cifs.ko
I am working on a larger set of changes (the usual ... multichannel,
auth and signing improvements), but wanted to get these in earlier to
reduce chance of merge conflicts later in the merge window"
* tag '5.15-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Do not leak EDEADLK to dgetents64 for STATUS_USER_SESSION_DELETED
cifs: add cifs_common directory to MAINTAINERS file
cifs: cifs_md4 convert to SPDX identifier
cifs: create a MD4 module and switch cifs.ko to use it
cifs: fork arc4 and create a separate module for it for cifs and other users
cifs: remove support for NTLM and weaker authentication algorithms
cifs: enable fscache usage even for files opened as rw
oid_registry: Add OIDs for missing Spnego auth mechanisms to Macs
smb3: fix posix extensions mount option
cifs: fix wrong release in sess_alloc_buffer() failed path
CIFS: Fix a potencially linear read overflow
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmEr2okACgkQiiy9cAdy
T1GucQwAoZykSKyy2AMbyYSap1Bm+CXX7YHoMlnqt0IF8ka9XKFj8nMBPgB8GKFE
JLyikUxxeqgwbuOAkeyJu2knzX7QH18yTqz/YpytCx5waBgWdhLybn01xx/2n8fX
ZA6E3Sb4aJKD7DO1Ia5t0u1lI4c2iZTIOwpoYgTX7VQi8VQYU/TN6aOIZR0Xgznw
ffoxC4d9nlDjLzlTqY4oLnuIEQ0zHUBhndXxSy5Zh20cBUOLeWkOLUt1w1IkaR36
f4k2UL3Y8njc9mKiOsQfFV/KE6YnPA0hZ48+h3xmWopjIJp5Wl7ublA/2c9rjxCf
K5PwwgZ2bS5OpDvzSMPmquxGdQm9aPOlWwTbSL0NHe1ws/bD3Gx3/5/pjGJjyaYb
i0YagAI8VaJPnPqBGdCfcwgV4NtshzSV2l9qfnkBG2hwkD4DldFt2qP4s/nQXPNt
/bmEoTjuzrNhYbw3N2bbBQUK9CKhGywCbb2yAtSx5Me4FfxNANQ7lK1VLdfd6h4k
o9esOBdF
=yh1J
-----END PGP SIGNATURE-----
Merge tag '5.15-rc-first-ksmbd-merge' of git://git.samba.org/ksmbd
Pull initial ksmbd implementation from Steve French:
"Initial merge of kernel smb3 file server, ksmbd.
The SMB family of protocols is the most widely deployed network
filesystem protocol, the default on Windows and Macs (and even on many
phones and tablets), with clients and servers on all major operating
systems, but lacked a kernel server for Linux. For many cases the
current userspace server choices were suboptimal either due to memory
footprint, performance or difficulty integrating well with advanced
Linux features.
ksmbd is a new kernel module which implements the server-side of the
SMB3 protocol. The target is to provide optimized performance, GPLv2
SMB server, and better lease handling (distributed caching). The
bigger goal is to add new features more rapidly (e.g. RDMA aka
"smbdirect", and recent encryption and signing improvements to the
protocol) which are easier to develop on a smaller, more tightly
optimized kernel server than for example in Samba.
The Samba project is much broader in scope (tools, security services,
LDAP, Active Directory Domain Controller, and a cross platform file
server for a wider variety of purposes) but the user space file server
portion of Samba has proved hard to optimize for some Linux workloads,
including for smaller devices.
This is not meant to replace Samba, but rather be an extension to
allow better optimizing for Linux, and will continue to integrate well
with Samba user space tools and libraries where appropriate. Working
with the Samba team we have already made sure that the configuration
files and xattrs are in a compatible format between the kernel and
user space server.
Various types of functional and regression tests are regularly run
against it. One example is the automated 'buildbot' regression tests
which use the Linux client to test against ksmbd, e.g.
http://smb3-test-rhel-75.southcentralus.cloudapp.azure.com/#/builders/8/builds/56
but other test suites, including Samba's smbtorture functional test
suite are also used regularly"
* tag '5.15-rc-first-ksmbd-merge' of git://git.samba.org/ksmbd: (219 commits)
ksmbd: fix __write_overflow warning in ndr_read_string
MAINTAINERS: ksmbd: add cifs_common directory to ksmbd entry
MAINTAINERS: ksmbd: update my email address
ksmbd: fix permission check issue on chown and chmod
ksmbd: don't set FILE DELETE and FILE_DELETE_CHILD in access mask by default
MAINTAINERS: add git adddress of ksmbd
ksmbd: update SMB3 multi-channel support in ksmbd.rst
ksmbd: smbd: fix kernel oops during server shutdown
ksmbd: remove select FS_POSIX_ACL in Kconfig
ksmbd: use proper errno instead of -1 in smb2_get_ksmbd_tcon()
ksmbd: update the comment for smb2_get_ksmbd_tcon()
ksmbd: change int data type to boolean
ksmbd: Fix multi-protocol negotiation
ksmbd: fix an oops in error handling in smb2_open()
ksmbd: add ipv6_addr_v4mapped check to know if connection from client is ipv4
ksmbd: fix missing error code in smb2_lock
ksmbd: use channel signingkey for binding SMB2 session setup
ksmbd: don't set RSS capable in FSCTL_QUERY_NETWORK_INTERFACE_INFO
ksmbd: Return STATUS_OBJECT_PATH_NOT_FOUND if smb2_creat() returns ENOENT
ksmbd: fix -Wstringop-truncation warnings
...
We can not drop ARC4 and basically destroy CIFS connectivity for
almost all CIFS users so create a new forked ARC4 module that CIFS and other
subsystems that have a hard dependency on ARC4 can use.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We have a fairly specific alpha binary loader in Linux: running x86
(i386, i486) binaries via the em86 [1] emulator. As noted in the Kconfig
option, the same behavior can be achieved via binfmt_misc, for example,
more nowadays used for running qemu-user.
An example on how to get binfmt_misc running with em86 can be found in
Documentation/admin-guide/binfmt-misc.rst
The defconfig does not have CONFIG_BINFMT_EM86=y set. And doing a
make defconfig && make olddefconfig
results in
# CONFIG_BINFMT_EM86 is not set
... as we don't seem to have any supported Linux distirbution for alpha
anymore, there isn't really any "default" user of that feature anymore.
Searching for "CONFIG_BINFMT_EM86=y" reveals mostly discussions from
around 20 years ago, like [2] describing how to get netscape via em86
running via em86, or [3] discussing that running wine or installing
Win 3.11 through em86 would be a nice feature.
The latest binaries available for em86 are from 2000, version 2.2.1 [4] --
which translates to "unsupported"; further, em86 doesn't even work with
glibc-2.x but only with glibc-2.0 [4, 5]. These are clear signs that
there might not be too many em86 users out there, especially users
relying on modern Linux kernels.
Even though the code footprint is relatively small, let's just get rid
of this blast from the past that's effectively unused.
[1] http://ftp.dreamtime.org/pub/linux/Linux-Alpha/em86/v0.4/docs/em86.html
[2] https://static.lwn.net/1998/1119/a/alpha-netscape.html
[3] https://groups.google.com/g/linux.debian.alpha/c/AkGuQHeCe0Y
[4] http://zeniv.linux.org.uk/pub/linux/alpha/em86/v2.2-1/relnotes.2.2.1.html
[5] https://forum.teamspeak.com/archive/index.php/t-1477.html
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Cc: linux-alpha@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Move fs/cifsd to fs/ksmbd and rename the remaining cifsd name to ksmbd.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This adds the Kconfig and Makefile for cifsd.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The dcookies stuff was only used by the kernel's old oprofile code. Now
that oprofile's support is removed from the kernel, there is no need for
dcookies as well. Remove it.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Robert Richter <rric@kernel.org>
Acked-by: William Cohen <wcohen@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
- Move the file range remap generic functions out of mm/filemap.c and
fs/read_write.c and into fs/remap_range.c to reduce clutter in the first
two files.
-----BEGIN PGP SIGNATURE-----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=DAPl
-----END PGP SIGNATURE-----
Merge tag 'vfs-5.10-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull clone/dedupe/remap code refactoring from Darrick Wong:
"Move the generic file range remap (aka reflink and dedupe) functions
out of mm/filemap.c and fs/read_write.c and into fs/remap_range.c to
reduce clutter in the first two files"
* tag 'vfs-5.10-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
vfs: move the generic write and copy checks out of mm
vfs: move the remap range helpers to remap_range.c
vfs: move generic_remap_checks out of mm
Here is the big set of char, misc, and other assorted driver subsystem
patches for 5.10-rc1.
There's a lot of different things in here, all over the drivers/
directory. Some summaries:
- soundwire driver updates
- habanalabs driver updates
- extcon driver updates
- nitro_enclaves new driver
- fsl-mc driver and core updates
- mhi core and bus updates
- nvmem driver updates
- eeprom driver updates
- binder driver updates and fixes
- vbox minor bugfixes
- fsi driver updates
- w1 driver updates
- coresight driver updates
- interconnect driver updates
- misc driver updates
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4g8YQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yngKgCeNpArCP/9vQJRK9upnDm8ZLunSCUAn1wUT/2A
/bTQ42c/WRQ+LU828GSM
=6sO2
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char, misc, and other assorted driver subsystem
patches for 5.10-rc1.
There's a lot of different things in here, all over the drivers/
directory. Some summaries:
- soundwire driver updates
- habanalabs driver updates
- extcon driver updates
- nitro_enclaves new driver
- fsl-mc driver and core updates
- mhi core and bus updates
- nvmem driver updates
- eeprom driver updates
- binder driver updates and fixes
- vbox minor bugfixes
- fsi driver updates
- w1 driver updates
- coresight driver updates
- interconnect driver updates
- misc driver updates
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (396 commits)
binder: fix UAF when releasing todo list
docs: w1: w1_therm: Fix broken xref, mistakes, clarify text
misc: Kconfig: fix a HISI_HIKEY_USB dependency
LSM: Fix type of id parameter in kernel_post_load_data prototype
misc: Kconfig: add a new dependency for HISI_HIKEY_USB
firmware_loader: fix a kernel-doc markup
w1: w1_therm: make w1_poll_completion static
binder: simplify the return expression of binder_mmap
test_firmware: Test partial read support
firmware: Add request_partial_firmware_into_buf()
firmware: Store opt_flags in fw_priv
fs/kernel_file_read: Add "offset" arg for partial reads
IMA: Add support for file reads without contents
LSM: Add "contents" flag to kernel_read_file hook
module: Call security_kernel_post_load_data()
firmware_loader: Use security_post_load_data()
LSM: Introduce kernel_post_load_data() hook
fs/kernel_read_file: Add file_size output argument
fs/kernel_read_file: Switch buffer size arg to size_t
fs/kernel_read_file: Remove redundant size argument
...
I would like to move all the generic helpers for the vfs remap range
functionality (aka clonerange and dedupe) into a separate file so that
they won't be scattered across the vfs and the mm subsystems. The
eventual goal is to be able to deselect remap_range.c if none of the
filesystems need that code, but the tricky part here is picking a
stable(ish) part of the merge window to rearrange code.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
These routines are used in places outside of exec(2), so in preparation
for refactoring them, move them into a separate source file,
fs/kernel_read_file.c.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20201002173828.2099543-5-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
compat_sys_mount is identical to the regular sys_mount now, so remove it
and use the native version everywhere.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Like do_mount, but takes a kernel pointer for the destination path.
Switch over the mounts in the init code and devtmpfs to it, which
just happen to work due to the implicit set_fs(KERNEL_DS) during early
init right now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
This adds the Kconfig and Makefile for exfat.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Zonefs is a very simple file system exposing each zone of a zoned block
device as a file.
Unlike a regular file system with native zoned block device support
(e.g. f2fs or the on-going btrfs effort), zonefs does not hide the
sequential write constraint of zoned block devices to the user. As a
result, zonefs is not a POSIX compliant file system. Its goal is to
simplify the implementation of zoned block devices support in
applications by replacing raw block device file accesses with a richer
file based API, avoiding relying on direct block device file ioctls
which may be more obscure to developers.
One example of this approach is the implementation of LSM
(log-structured merge) tree structures (such as used in RocksDB and
LevelDB) on zoned block devices by allowing SSTables to be stored in a
zone file similarly to a regular file system rather than as a range of
sectors of a zoned device. The introduction of the higher level
construct "one file is one zone" can help reducing the amount of changes
needed in the application while at the same time allowing the use of
zoned block devices with various programming languages other than C.
Zonefs IO management implementation uses the new iomap generic code.
Zonefs has been successfully tested using a functional test suite
(available with zonefs userland format tool on github) and a prototype
implementation of LevelDB on top of zonefs.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCXj1y8QAKCRDdoc3SxdoY
dqozAP9J3t+Q95BgKgI5jP+XEtyYsPBTaVrvaSaViEnwtJLVoQD/ZQ1lTCZSE9OI
UkvWawkuFtLGfOxTqyA3eZrZi22Ttwk=
=YVvO
-----END PGP SIGNATURE-----
Merge tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull new zonefs file system from Damien Le Moal:
"Zonefs is a very simple file system exposing each zone of a zoned
block device as a file.
Unlike a regular file system with native zoned block device support
(e.g. f2fs or the on-going btrfs effort), zonefs does not hide the
sequential write constraint of zoned block devices to the user. As a
result, zonefs is not a POSIX compliant file system. Its goal is to
simplify the implementation of zoned block devices support in
applications by replacing raw block device file accesses with a richer
file based API, avoiding relying on direct block device file ioctls
which may be more obscure to developers.
One example of this approach is the implementation of LSM
(log-structured merge) tree structures (such as used in RocksDB and
LevelDB) on zoned block devices by allowing SSTables to be stored in a
zone file similarly to a regular file system rather than as a range of
sectors of a zoned device. The introduction of the higher level
construct "one file is one zone" can help reducing the amount of
changes needed in the application while at the same time allowing the
use of zoned block devices with various programming languages other
than C.
Zonefs IO management implementation uses the new iomap generic code.
Zonefs has been successfully tested using a functional test suite
(available with zonefs userland format tool on github) and a prototype
implementation of LevelDB on top of zonefs"
* tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Add documentation
fs: New zonefs file system
Pull vboxfs from Al Viro:
"This is the VirtualBox guest shared folder support by Hans de Goede,
with fixups for fs_parse folded in to avoid bisection hazards from
those API changes..."
* 'work.vboxsf' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Add VirtualBox guest shared folder (vboxsf) support
VirtualBox hosts can share folders with guests, this commit adds a
VFS driver implementing the Linux-guest side of this, allowing folders
exported by the host to be mounted under Linux.
This driver depends on the guest <-> host IPC functions exported by
the vboxguest driver.
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
zonefs is a very simple file system exposing each zone of a zoned block
device as a file. Unlike a regular file system with zoned block device
support (e.g. f2fs), zonefs does not hide the sequential write
constraint of zoned block devices to the user. Files representing
sequential write zones of the device must be written sequentially
starting from the end of the file (append only writes).
As such, zonefs is in essence closer to a raw block device access
interface than to a full featured POSIX file system. The goal of zonefs
is to simplify the implementation of zoned block device support in
applications by replacing raw block device file accesses with a richer
file API, avoiding relying on direct block device file ioctls which may
be more obscure to developers. One example of this approach is the
implementation of LSM (log-structured merge) tree structures (such as
used in RocksDB and LevelDB) on zoned block devices by allowing SSTables
to be stored in a zone file similarly to a regular file system rather
than as a range of sectors of a zoned device. The introduction of the
higher level construct "one file is one zone" can help reducing the
amount of changes needed in the application as well as introducing
support for different application programming languages.
Zonefs on-disk metadata is reduced to an immutable super block to
persistently store a magic number and optional feature flags and
values. On mount, zonefs uses blkdev_report_zones() to obtain the device
zone configuration and populates the mount point with a static file tree
solely based on this information. E.g. file sizes come from the device
zone type and write pointer offset managed by the device itself.
The zone files created on mount have the following characteristics.
1) Files representing zones of the same type are grouped together
under a common sub-directory:
* For conventional zones, the sub-directory "cnv" is used.
* For sequential write zones, the sub-directory "seq" is used.
These two directories are the only directories that exist in zonefs.
Users cannot create other directories and cannot rename nor delete
the "cnv" and "seq" sub-directories.
2) The name of zone files is the number of the file within the zone
type sub-directory, in order of increasing zone start sector.
3) The size of conventional zone files is fixed to the device zone size.
Conventional zone files cannot be truncated.
4) The size of sequential zone files represent the file's zone write
pointer position relative to the zone start sector. Truncating these
files is allowed only down to 0, in which case, the zone is reset to
rewind the zone write pointer position to the start of the zone, or
up to the zone size, in which case the file's zone is transitioned
to the FULL state (finish zone operation).
5) All read and write operations to files are not allowed beyond the
file zone size. Any access exceeding the zone size is failed with
the -EFBIG error.
6) Creating, deleting, renaming or modifying any attribute of files and
sub-directories is not allowed.
7) There are no restrictions on the type of read and write operations
that can be issued to conventional zone files. Buffered, direct and
mmap read & write operations are accepted. For sequential zone files,
there are no restrictions on read operations, but all write
operations must be direct IO append writes. mmap write of sequential
files is not allowed.
Several optional features of zonefs can be enabled at format time.
* Conventional zone aggregation: ranges of contiguous conventional
zones can be aggregated into a single larger file instead of the
default one file per zone.
* File ownership: The owner UID and GID of zone files is by default 0
(root) but can be changed to any valid UID/GID.
* File access permissions: the default 640 access permissions can be
changed.
The mkzonefs tool is used to format zoned block devices for use with
zonefs. This tool is available on Github at:
git@github.com:damien-lemoal/zonefs-tools.git.
zonefs-tools also includes a test suite which can be run against any
zoned block device, including null_blk block device created with zoned
mode.
Example: the following formats a 15TB host-managed SMR HDD with 256 MB
zones with the conventional zones aggregation feature enabled.
$ sudo mkzonefs -o aggr_cnv /dev/sdX
$ sudo mount -t zonefs /dev/sdX /mnt
$ ls -l /mnt/
total 0
dr-xr-xr-x 2 root root 1 Nov 25 13:23 cnv
dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq
The size of the zone files sub-directories indicate the number of files
existing for each type of zones. In this example, there is only one
conventional zone file (all conventional zones are aggregated under a
single file).
$ ls -l /mnt/cnv
total 137101312
-rw-r----- 1 root root 140391743488 Nov 25 13:23 0
This aggregated conventional zone file can be used as a regular file.
$ sudo mkfs.ext4 /mnt/cnv/0
$ sudo mount -o loop /mnt/cnv/0 /data
The "seq" sub-directory grouping files for sequential write zones has
in this example 55356 zones.
$ ls -lv /mnt/seq
total 14511243264
-rw-r----- 1 root root 0 Nov 25 13:23 0
-rw-r----- 1 root root 0 Nov 25 13:23 1
-rw-r----- 1 root root 0 Nov 25 13:23 2
...
-rw-r----- 1 root root 0 Nov 25 13:23 55354
-rw-r----- 1 root root 0 Nov 25 13:23 55355
For sequential write zone files, the file size changes as data is
appended at the end of the file, similarly to any regular file system.
$ dd if=/dev/zero of=/mnt/seq/0 bs=4K count=1 conv=notrunc oflag=direct
1+0 records in
1+0 records out
4096 bytes (4.1 kB, 4.0 KiB) copied, 0.000452219 s, 9.1 MB/s
$ ls -l /mnt/seq/0
-rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0
The written file can be truncated to the zone size, preventing any
further write operation.
$ truncate -s 268435456 /mnt/seq/0
$ ls -l /mnt/seq/0
-rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0
Truncation to 0 size allows freeing the file zone storage space and
restart append-writes to the file.
$ truncate -s 0 /mnt/seq/0
$ ls -l /mnt/seq/0
-rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0
Since files are statically mapped to zones on the disk, the number of
blocks of a file as reported by stat() and fstat() indicates the size
of the file zone.
$ stat /mnt/seq/0
File: /mnt/seq/0
Size: 0 Blocks: 524288 IO Block: 4096 regular empty file
Device: 870h/2160d Inode: 50431 Links: 1
Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root)
Access: 2019-11-25 13:23:57.048971997 +0900
Modify: 2019-11-25 13:52:25.553805765 +0900
Change: 2019-11-25 13:52:25.553805765 +0900
Birth: -
The number of blocks of the file ("Blocks") in units of 512B blocks
gives the maximum file size of 524288 * 512 B = 256 MB, corresponding
to the device zone size in this example. Of note is that the "IO block"
field always indicates the minimum IO size for writes and corresponds
to the device physical sector size.
This code contains contributions from:
* Johannes Thumshirn <jthumshirn@suse.de>,
* Darrick J. Wong <darrick.wong@oracle.com>,
* Christoph Hellwig <hch@lst.de>,
* Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> and
* Ting Yao <tingyao@hust.edu.cn>.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The rest of the fs/compat_ioctl.c file is no longer useful now,
so move the actual syscall as planned.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
