Minor fix for virtio: code wanting to access the fields inside an skb
frag should use the skb_frag_*() helpers, instead of accessing the
fields directly. This allows for extensions where the underlying
memory is not a page.
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://lore.kernel.org/r/20240102205905.793738-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Send credit update message when SO_RCVLOWAT is updated and it is bigger
than number of bytes in rx queue. It is needed, because 'poll()' will
wait until number of bytes in rx queue will be not smaller than
O_RCVLOWAT, so kick sender to send more data. Otherwise mutual hungup
for tx/rx is possible: sender waits for free space and receiver is
waiting data in 'poll()'.
Rename 'set_rcvlowat' callback to 'notify_set_rcvlowat' and set
'sk->sk_rcvlowat' only in one place (i.e. 'vsock_set_rcvlowat'), so the
transport doesn't need to do it.
Fixes: b89d882dc9 ("vsock/virtio: reduce credit update messages")
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add one more condition for sending credit update during dequeue from
stream socket: when number of bytes in the rx queue is smaller than
SO_RCVLOWAT value of the socket. This is actual for non-default value
of SO_RCVLOWAT (e.g. not 1) - idea is to "kick" peer to continue data
transmission, because we need at least SO_RCVLOWAT bytes in our rx
queue to wake up user for reading data (in corner case it is also
possible to stuck both tx and rx sides, this is why 'Fixes' is used).
Fixes: b89d882dc9 ("vsock/virtio: reduce credit update messages")
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to do signed arithmetic if we expect condition
`if (bytes < 0)` to be possible
Found by Linux Verification Center (linuxtesting.org) with SVACE
Fixes: 06a8fc7836 ("VSOCK: Introduce virtio_vsock_common.ko")
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231211162317.4116625-1-kniv@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After backporting commit 581512a6dc ("vsock/virtio: MSG_ZEROCOPY
flag support") in CentOS Stream 9, CI reported the following error:
In file included from ./include/linux/kernel.h:17,
from ./include/linux/list.h:9,
from ./include/linux/preempt.h:11,
from ./include/linux/spinlock.h:56,
from net/vmw_vsock/virtio_transport_common.c:9:
net/vmw_vsock/virtio_transport_common.c: In function ‘virtio_transport_can_zcopy‘:
./include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast [-Werror]
20 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
./include/linux/minmax.h:26:18: note: in expansion of macro ‘__typecheck‘
26 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
./include/linux/minmax.h:36:31: note: in expansion of macro ‘__safe_cmp‘
36 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
./include/linux/minmax.h:45:25: note: in expansion of macro ‘__careful_cmp‘
45 | #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
net/vmw_vsock/virtio_transport_common.c:63:37: note: in expansion of macro ‘min‘
63 | int pages_to_send = min(pages_in_iov, MAX_SKB_FRAGS);
We could solve it by using min_t(), but this operation seems entirely
unnecessary, because we also pass MAX_SKB_FRAGS to iov_iter_npages(),
which performs almost the same check, returning at most MAX_SKB_FRAGS
elements. So, let's eliminate this unnecessary comparison.
Fixes: 581512a6dc ("vsock/virtio: MSG_ZEROCOPY flag support")
Cc: avkrasnov@salutedevices.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Link: https://lore.kernel.org/r/20231206164143.281107-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to all the sock diag modules in one fell swoop.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the same remote peer, using the same port, tries to connect
to a server on a listening port more than once, the server will
reject the connection, causing a "connection reset by peer"
error on the remote peer. This is due to the presence of a
dangling socket from a previous connection in both the connected
and bound socket lists.
The inconsistency of the above lists only occurs when the remote
peer disconnects and the server remains active.
This bug does not occur when the server socket is closed:
virtio_transport_release() will eventually schedule a call to
virtio_transport_do_close() and the latter will remove the socket
from the bound and connected socket lists and clear the sk_buff.
However, virtio_transport_do_close() will only perform the above
actions if it has been scheduled, and this will not happen
if the server is processing the shutdown message from a remote peer.
To fix this, introduce a call to vsock_remove_sock()
when the server is handling a client disconnect.
This is to remove the socket from the bound and connected socket
lists without clearing the sk_buff.
Fixes: 06a8fc7836 ("VSOCK: Introduce virtio_vsock_common.ko")
Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Tested-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once VQs are filled with empty buffers and we kick the host, it can send
connection requests. If the_virtio_vsock is not initialized before,
replies are silently dropped and do not reach the host.
virtio_transport_send_pkt() can queue packets once the_virtio_vsock is
set, but they won't be processed until vsock->tx_run is set to true. We
queue vsock->send_pkt_work when initialization finishes to send those
packets queued earlier.
Fixes: 0deab087b1 ("vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock")
Signed-off-by: Alexandru Matei <alexandru.matei@uipath.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231024191742.14259-1-alexandru.matei@uipath.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For AF_VSOCK, zerocopy tx mode depends on transport, so this option must
be set in AF_VSOCK implementation where transport is accessible (if
transport is not set during setting SO_ZEROCOPY: for example socket is
not connected, then SO_ZEROCOPY will be enabled, but once transport will
be assigned, support of this type of transmission will be checked).
To handle SO_ZEROCOPY, AF_VSOCK implementation uses SOCK_CUSTOM_SOCKOPT
bit, thus handling SOL_SOCKET option operations, but all of them except
SO_ZEROCOPY will be forwarded to the generic handler by calling
'sock_setsockopt()'.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add 'msgzerocopy_allow()' callback for loopback transport.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add 'msgzerocopy_allow()' callback for virtio transport.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This bit is used by io_uring in case of zerocopy tx mode. io_uring code
checks, that socket has this feature. This patch sets it in two places:
1) For socket in 'connect()' call.
2) For new socket which is returned by 'accept()' call.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This feature totally depends on transport, so if transport doesn't
support it, return error.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds handling of MSG_ERRQUEUE input flag in receive call. This flag
is used to read socket's error queue instead of data queue. Possible
scenario of error queue usage is receiving completions for transmission
with MSG_ZEROCOPY flag. This patch also adds new defines: 'SOL_VSOCK'
and 'VSOCK_RECVERR'.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If socket's error queue is not empty, EPOLLERR must be set. Otherwise,
reader of error queue won't detect data in it using EPOLLERR bit.
Currently for AF_VSOCK this is actual only with MSG_ZEROCOPY, as this
feature is the only user of an error queue of the socket.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds handling of MSG_ZEROCOPY flag on transmission path:
1) If this flag is set and zerocopy transmission is possible (enabled
in socket options and transport allows zerocopy), then non-linear
skb will be created and filled with the pages of user's buffer.
Pages of user's buffer are locked in memory by 'get_user_pages()'.
2) Replaces way of skb owning: instead of 'skb_set_owner_sk_safe()' it
calls 'skb_set_owner_w()'. Reason of this change is that
'__zerocopy_sg_from_iter()' increments 'sk_wmem_alloc' of socket, so
to decrease this field correctly, proper skb destructor is needed:
'sock_wfree()'. This destructor is set by 'skb_set_owner_w()'.
3) Adds new callback to 'struct virtio_transport': 'can_msgzerocopy'.
If this callback is set, then transport needs extra check to be able
to send provided number of buffers in zerocopy mode. Currently, the
only transport that needs this callback set is virtio, because this
transport adds new buffers to the virtio queue and we need to check,
that number of these buffers is less than size of the queue (it is
required by virtio spec). vhost and loopback transports don't need
this check.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For tap device new skb is created and data from the current skb is
copied to it. This adds copying data from non-linear skb to new
the skb.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For non-linear skb use its pages from fragment array as buffers in
virtio tx queue. These pages are already pinned by 'get_user_pages()'
during such skb creation.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is preparation patch for MSG_ZEROCOPY support. It adds handling of
non-linear skbs by replacing direct calls of 'memcpy_to_msg()' with
'skb_copy_datagram_iter()'. Main advantage of the second one is that it
can handle paged part of the skb by using 'kmap()' on each page, but if
there are no pages in the skb, it behaves like simple copying to iov
iterator. This patch also adds new field to the control block of skb -
this value shows current offset in the skb to read next portion of data
(it doesn't matter linear it or not). Idea behind this field is that
'skb_copy_datagram_iter()' handles both types of skb internally - it
just needs an offset from which to copy data from the given skb. This
offset is incremented on each read from skb. This approach allows to
simplify handling of both linear and non-linear skbs, because for
linear skb we need to call 'skb_pull()' after reading data from it,
while in non-linear case we need to update 'data_len'.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
POSIX requires to send SIGPIPE on write to SOCK_STREAM socket which was
shutdowned with SHUT_WR flag or its peer was shutdowned with SHUT_RD
flag. Also we must not send SIGPIPE if MSG_NOSIGNAL flag is set.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
These are never implemented since introduction in
commit d021c34405 ("VSOCK: Introduce VM Sockets")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20230729122036.32988-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds support of MSG_PEEK flag for SOCK_SEQPACKET type of socket.
Difference with SOCK_STREAM is that this callback returns either length
of the message or error.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reworks current implementation of MSG_PEEK logic:
1) Replaces 'skb_queue_walk_safe()' with 'skb_queue_walk()'. There is
no need in the first one, as there are no removes of skb in loop.
2) Removes nested while loop - MSG_PEEK logic could be implemented
without it: just iterate over skbs without removing it and copy
data from each until destination buffer is not full.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The read_skb hook calls consume_skb() now, but this means that if the
recv_actor program wants to use the skb it needs to inc the ref cnt
so that the consume_skb() doesn't kfree the sk_buff.
This is problematic because in some error cases under memory pressure
we may need to linearize the sk_buff from sk_psock_skb_ingress_enqueue().
Then we get this,
skb_linearize()
__pskb_pull_tail()
pskb_expand_head()
BUG_ON(skb_shared(skb))
Because we incremented users refcnt from sk_psock_verdict_recv() we
hit the bug on with refcnt > 1 and trip it.
To fix lets simply pass ownership of the sk_buff through the skb_read
call. Then we can drop the consume from read_skb handlers and assume
the verdict recv does any required kfree.
Bug found while testing in our CI which runs in VMs that hit memory
constraints rather regularly. William tested TCP read_skb handlers.
[ 106.536188] ------------[ cut here ]------------
[ 106.536197] kernel BUG at net/core/skbuff.c:1693!
[ 106.536479] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 106.536726] CPU: 3 PID: 1495 Comm: curl Not tainted 5.19.0-rc5 #1
[ 106.537023] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.16.0-1 04/01/2014
[ 106.537467] RIP: 0010:pskb_expand_head+0x269/0x330
[ 106.538585] RSP: 0018:ffffc90000138b68 EFLAGS: 00010202
[ 106.538839] RAX: 000000000000003f RBX: ffff8881048940e8 RCX: 0000000000000a20
[ 106.539186] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff8881048940e8
[ 106.539529] RBP: ffffc90000138be8 R08: 00000000e161fd1a R09: 0000000000000000
[ 106.539877] R10: 0000000000000018 R11: 0000000000000000 R12: ffff8881048940e8
[ 106.540222] R13: 0000000000000003 R14: 0000000000000000 R15: ffff8881048940e8
[ 106.540568] FS: 00007f277dde9f00(0000) GS:ffff88813bd80000(0000) knlGS:0000000000000000
[ 106.540954] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 106.541227] CR2: 00007f277eeede64 CR3: 000000000ad3e000 CR4: 00000000000006e0
[ 106.541569] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 106.541915] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 106.542255] Call Trace:
[ 106.542383] <IRQ>
[ 106.542487] __pskb_pull_tail+0x4b/0x3e0
[ 106.542681] skb_ensure_writable+0x85/0xa0
[ 106.542882] sk_skb_pull_data+0x18/0x20
[ 106.543084] bpf_prog_b517a65a242018b0_bpf_skskb_http_verdict+0x3a9/0x4aa9
[ 106.543536] ? migrate_disable+0x66/0x80
[ 106.543871] sk_psock_verdict_recv+0xe2/0x310
[ 106.544258] ? sk_psock_write_space+0x1f0/0x1f0
[ 106.544561] tcp_read_skb+0x7b/0x120
[ 106.544740] tcp_data_queue+0x904/0xee0
[ 106.544931] tcp_rcv_established+0x212/0x7c0
[ 106.545142] tcp_v4_do_rcv+0x174/0x2a0
[ 106.545326] tcp_v4_rcv+0xe70/0xf60
[ 106.545500] ip_protocol_deliver_rcu+0x48/0x290
[ 106.545744] ip_local_deliver_finish+0xa7/0x150
Fixes: 04919bed94 ("tcp: Introduce tcp_read_skb()")
Reported-by: William Findlay <will@isovalent.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: William Findlay <will@isovalent.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-2-john.fastabend@gmail.com
When client and server establish a connection through vsock,
the client send a request to the server to initiate the connection,
then start a timer to wait for the server's response. When the server's
RESPONSE message arrives, the timer also times out and exits. The
server's RESPONSE message is processed first, and the connection is
established. However, the client's timer also times out, the original
processing logic of the client is to directly set the state of this vsock
to CLOSE and return ETIMEDOUT. It will not notify the server when the port
is released, causing the server port remain.
when client's vsock_connect timeout，it should check sk state is
ESTABLISHED or not. if sk state is ESTABLISHED, it means the connection
is established, the client should not set the sk state to CLOSE
Note: I encountered this issue on kernel-4.18, which can be fixed by
this patch. Then I checked the latest code in the community
and found similar issue.
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Signed-off-by: Zhuang Shengen <zhuangshengen@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This replaces 'skb_queue_tail()' with 'virtio_vsock_skb_queue_tail()'.
The first one uses 'spin_lock_irqsave()', second uses 'spin_lock_bh()'.
There is no need to disable interrupts in the loopback transport as
there is no access to the queue with skbs from interrupt context. Both
virtio and vhost transports work in the same way.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This removes behaviour, where error code returned from any transport
was always switched to ENOMEM. This works in the same way as:
commit
c43170b7e1 ("vsock: return errors other than -ENOMEM to socket"),
but for receive calls.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This adds conversion of VMCI specific error code to general -ENOMEM. It
is preparation for the next patch, which changes af_vsock.c behaviour
on receive to pass value returned from transport to the user.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This adds conversion of VMCI specific error code to general -ENOMEM. It
is needed, because af_vsock.c passes error value returned from transport
to the user, which does not expect to get VMCI_ERROR_* values.
Fixes: c43170b7e1 ("vsock: return errors other than -ENOMEM to socket")
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch sets the skb owner in the recv and send path for virtio.
For the send path, this solves the leak caused when
virtio_transport_purge_skbs() finds skb->sk is always NULL and therefore
never matches it with the current socket. Setting the owner upon
allocation fixes this.
For the recv path, this ensures correctness of accounting and also
correct transfer of ownership in vsock_loopback (when skbs are sent from
one socket and received by another).
Fixes: 71dc9ec9ac ("virtio/vsock: replace virtio_vsock_pkt with sk_buff")
Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://lore.kernel.org/all/ZCCbATwov4U+GBUv@pop-os.localdomain/
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/ethernet/mediatek/mtk_ppe.c
3fbe4d8c0e ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting")
924531326e ("net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds WARN_ONCE() and return from stream dequeue callback when
socket's queue is empty, but 'rx_bytes' still non-zero. This allows
the detection of potential bugs due to packet merging (see previous
patch).
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This fixes appending newly arrived skbuff to the last skbuff of the
socket's queue. Problem fires when we are trying to append data to skbuff
which was already processed in dequeue callback at least once. Dequeue
callback calls function 'skb_pull()' which changes 'skb->len'. In current
implementation 'skb->len' is used to update length in header of the last
skbuff after new data was copied to it. This is bug, because value in
header is used to calculate 'rx_bytes'/'fwd_cnt' and thus must be not
be changed during skbuff's lifetime.
Bug starts to fire since:
commit 0777061657
("virtio/vsock: don't use skbuff state to account credit")
It presents before, but didn't triggered due to a little bit buggy
implementation of credit calculation logic. So use Fixes tag for it.
Fixes: 0777061657 ("virtio/vsock: don't use skbuff state to account credit")
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch adds sockmap support for vsock sockets. It is intended to be
usable by all transports, but only the virtio and loopback transports
are implemented.
SOCK_STREAM, SOCK_DGRAM, and SOCK_SEQPACKET are all supported.
Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both of these functions have no effect when input argument is 0, so to
avoid useless spinlock access, check argument before it.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This adds small optimization for tx path: instead of allocating single
skbuff on every call to transport, allocate multiple skbuff's until
credit space allows, thus trying to send as much as possible data without
return to af_vsock.c.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
pkt_list_lock was used before commit 71dc9ec9ac ("virtio/vsock:
replace virtio_vsock_pkt with sk_buff") to protect the packet queue.
After that commit we switched to sk_buff and we are using
sk_buff_head.lock in almost every place to protect the packet queue
except in vsock_loopback_work() when we call skb_queue_splice_init().
As reported by syzbot, this caused unlocked concurrent access to the
packet queue between vsock_loopback_work() and
vsock_loopback_cancel_pkt() since it is not holding pkt_list_lock.
With the introduction of sk_buff_head, pkt_list_lock is redundant and
can cause confusion, so let's remove it and use sk_buff_head.lock
everywhere to protect the packet queue access.
Fixes: 71dc9ec9ac ("virtio/vsock: replace virtio_vsock_pkt with sk_buff")
Cc: bobby.eshleman@bytedance.com
Reported-and-tested-by: syzbot+befff0a9536049e7902e@syzkaller.appspotmail.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Reviewed-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pointer to transport could be checked before allocation of skbuff, thus
there is no need to free skbuff when this pointer is NULL.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/08d61bef-0c11-c7f9-9266-cb2109070314@sberdevices.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This returns behaviour of SOCK_STREAM read as before skbuff usage. When
copying to user fails current skbuff won't be dropped, but returned to
sockets's queue. Technically instead of 'skb_dequeue()', 'skb_peek()' is
called and when skbuff becomes empty, it is removed from queue by
'__skb_unlink()'.
Fixes: 71dc9ec9ac ("virtio/vsock: replace virtio_vsock_pkt with sk_buff")
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since we now no longer use 'skb->len' to update credit, there is no sense
to update skbuff state, because it is used only once after dequeue to
copy data and then will be released.
Fixes: 71dc9ec9ac ("virtio/vsock: replace virtio_vsock_pkt with sk_buff")
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
'skb->len' can vary when we partially read the data, this complicates the
calculation of credit to be updated in 'virtio_transport_inc_rx_pkt()/
virtio_transport_dec_rx_pkt()'.
Also in 'virtio_transport_dec_rx_pkt()' we were miscalculating the
credit since 'skb->len' was redundant.
For these reasons, let's replace the use of skbuff state to calculate new
'rx_bytes'/'fwd_cnt' values with explicit value as input argument. This
makes code more simple, because it is not needed to change skbuff state
before each call to update 'rx_bytes'/'fwd_cnt'.
Fixes: 71dc9ec9ac ("virtio/vsock: replace virtio_vsock_pkt with sk_buff")
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
Since commit fc7a6209d5 ("bus: Make remove callback return
void") forces bus_type::remove be void-returned, it doesn't
make much sense for any bus based driver implementing remove
callbalk to return non-void to its caller.
As such, change the remove function for Hyper-V VMBus based
drivers to return void.
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Link: https://lore.kernel.org/r/TYCP286MB2323A93C55526E4DF239D3ACCAFA9@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Wei Liu <wei.liu@kernel.org>
This commit changes virtio/vsock to use sk_buff instead of
virtio_vsock_pkt. Beyond better conforming to other net code, using
sk_buff allows vsock to use sk_buff-dependent features in the future
(such as sockmap) and improves throughput.
This patch introduces the following performance changes:
Tool: Uperf
Env: Phys Host + L1 Guest
Payload: 64k
Threads: 16
Test Runs: 10
Type: SOCK_STREAM
Before: commit b7bfaa761d ("Linux 6.2-rc3")
Before
------
g2h: 16.77Gb/s
h2g: 10.56Gb/s
After
-----
g2h: 21.04Gb/s
h2g: 10.76Gb/s
Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This removes behaviour, where error code returned from any transport
was always switched to ENOMEM. For example when user tries to send too
big message via SEQPACKET socket, transport layers return EMSGSIZE, but
this error code was always replaced with ENOMEM and returned to user.
Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Core
----
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations.
- Add inet drop monitor support.
- A few GRO performance improvements.
- Add infrastructure for atomic dev stats, addressing long standing
data races.
- De-duplicate common code between OVS and conntrack offloading
infrastructure.
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements.
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up
the workload with the number of available CPUs.
- Add the helper support for connection-tracking OVS offload.
BPF
---
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF.
- Make cgroup local storage available to non-cgroup attached BPF
programs.
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers.
- A relevant bunch of BPF verifier fixes and improvements.
- Veristat tool improvements to support custom filtering, sorting,
and replay of results.
- Add LLVM disassembler as default library for dumping JITed code.
- Lots of new BPF documentation for various BPF maps.
- Add bpf_rcu_read_{,un}lock() support for sleepable programs.
- Add RCU grace period chaining to BPF to wait for the completion
of access from both sleepable and non-sleepable BPF programs.
- Add support storing struct task_struct objects as kptrs in maps.
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values.
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions.
Protocols
---------
- TCP: implement Protective Load Balancing across switch links.
- TCP: allow dynamically disabling TCP-MD5 static key, reverting
back to fast[er]-path.
- UDP: Introduce optional per-netns hash lookup table.
- IPv6: simplify and cleanup sockets disposal.
- Netlink: support different type policies for each generic
netlink operation.
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support.
- MPTCP: add netlink notification support for listener sockets
events.
- SCTP: add VRF support, allowing sctp sockets binding to VRF
devices.
- Add bridging MAC Authentication Bypass (MAB) support.
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios.
- More work for Wi-Fi 7 support, comprising conversion of all
the existing drivers to internal TX queue usage.
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading.
- IPSec: extended ack support for more descriptive XFRM error
reporting.
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking.
- IEEE 802154: synchronous send frame and extended filtering
support, initial support for scanning available 15.4 networks.
- Tun: bump the link speed from 10Mbps to 10Gbps.
- Tun/VirtioNet: implement UDP segmentation offload support.
Driver API
----------
- PHY/SFP: improve power level switching between standard
level 1 and the higher power levels.
- New API for netdev <-> devlink_port linkage.
- PTP: convert existing drivers to new frequency adjustment
implementation.
- DSA: add support for rx offloading.
- Autoload DSA tagging driver when dynamically changing protocol.
- Add new PCP and APPTRUST attributes to Data Center Bridging.
- Add configuration support for 800Gbps link speed.
- Add devlink port function attribute to enable/disable RoCE and
migratable.
- Extend devlink-rate to support strict prioriry and weighted fair
queuing.
- Add devlink support to directly reading from region memory.
- New device tree helper to fetch MAC address from nvmem.
- New big TCP helper to simplify temporary header stripping.
New hardware / drivers
----------------------
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches.
- Marvel Prestera AC5X Ethernet Switch.
- WangXun 10 Gigabit NIC.
- Motorcomm yt8521 Gigabit Ethernet.
- Microchip ksz9563 Gigabit Ethernet Switch.
- Microsoft Azure Network Adapter.
- Linux Automation 10Base-T1L adapter.
- PHY:
- Aquantia AQR112 and AQR412.
- Motorcomm YT8531S.
- PTP:
- Orolia ART-CARD.
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices.
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices.
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets.
- Realtek RTL8852BE and RTL8723DS.
- Cypress.CYW4373A0 WiFi + Bluetooth combo device.
Drivers
-------
- CAN:
- gs_usb: bus error reporting support.
- kvaser_usb: listen only and bus error reporting support.
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping.
- implement devlink-rate support.
- support direct read from memory.
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate.
- Support for enhanced events compression.
- extend H/W offload packet manipulation capabilities.
- implement IPSec packet offload mode.
- nVidia/Mellanox (mlx4):
- better big TCP support.
- Netronome Ethernet NICs (nfp):
- IPsec offload support.
- add support for multicast filter.
- Broadcom:
- RSS and PTP support improvements.
- AMD/SolarFlare:
- netlink extened ack improvements.
- add basic flower matches to offload, and related stats.
- Virtual NICs:
- ibmvnic: introduce affinity hint support.
- small / embedded:
- FreeScale fec: add initial XDP support.
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood.
- TI am65-cpsw: add suspend/resume support.
- Mediatek MT7986: add RX wireless wthernet dispatch support.
- Realtek 8169: enable GRO software interrupt coalescing per
default.
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP.
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support.
- add ip6gre support.
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support.
- enable flow offload support.
- Renesas:
- add rswitch R-Car Gen4 gPTP support.
- Microchip (lan966x):
- add full XDP support.
- add TC H/W offload via VCAP.
- enable PTP on bridge interfaces.
- Microchip (ksz8):
- add MTU support for KSZ8 series.
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan.
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support.
- add ack signal support.
- enable coredump support.
- remain_on_channel support.
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities.
- 320 MHz channels support.
- RealTek WiFi (rtw89):
- new dynamic header firmware format support.
- wake-over-WLAN support.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=CbJC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations
- Add inet drop monitor support
- A few GRO performance improvements
- Add infrastructure for atomic dev stats, addressing long standing
data races
- De-duplicate common code between OVS and conntrack offloading
infrastructure
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up the
workload with the number of available CPUs
- Add the helper support for connection-tracking OVS offload
BPF:
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF
- Make cgroup local storage available to non-cgroup attached BPF
programs
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers
- A relevant bunch of BPF verifier fixes and improvements
- Veristat tool improvements to support custom filtering, sorting,
and replay of results
- Add LLVM disassembler as default library for dumping JITed code
- Lots of new BPF documentation for various BPF maps
- Add bpf_rcu_read_{,un}lock() support for sleepable programs
- Add RCU grace period chaining to BPF to wait for the completion of
access from both sleepable and non-sleepable BPF programs
- Add support storing struct task_struct objects as kptrs in maps
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions
Protocols:
- TCP: implement Protective Load Balancing across switch links
- TCP: allow dynamically disabling TCP-MD5 static key, reverting back
to fast[er]-path
- UDP: Introduce optional per-netns hash lookup table
- IPv6: simplify and cleanup sockets disposal
- Netlink: support different type policies for each generic netlink
operation
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support
- MPTCP: add netlink notification support for listener sockets events
- SCTP: add VRF support, allowing sctp sockets binding to VRF devices
- Add bridging MAC Authentication Bypass (MAB) support
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios
- More work for Wi-Fi 7 support, comprising conversion of all the
existing drivers to internal TX queue usage
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading
- IPSec: extended ack support for more descriptive XFRM error
reporting
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking
- IEEE 802154: synchronous send frame and extended filtering support,
initial support for scanning available 15.4 networks
- Tun: bump the link speed from 10Mbps to 10Gbps
- Tun/VirtioNet: implement UDP segmentation offload support
Driver API:
- PHY/SFP: improve power level switching between standard level 1 and
the higher power levels
- New API for netdev <-> devlink_port linkage
- PTP: convert existing drivers to new frequency adjustment
implementation
- DSA: add support for rx offloading
- Autoload DSA tagging driver when dynamically changing protocol
- Add new PCP and APPTRUST attributes to Data Center Bridging
- Add configuration support for 800Gbps link speed
- Add devlink port function attribute to enable/disable RoCE and
migratable
- Extend devlink-rate to support strict prioriry and weighted fair
queuing
- Add devlink support to directly reading from region memory
- New device tree helper to fetch MAC address from nvmem
- New big TCP helper to simplify temporary header stripping
New hardware / drivers:
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches
- Marvel Prestera AC5X Ethernet Switch
- WangXun 10 Gigabit NIC
- Motorcomm yt8521 Gigabit Ethernet
- Microchip ksz9563 Gigabit Ethernet Switch
- Microsoft Azure Network Adapter
- Linux Automation 10Base-T1L adapter
- PHY:
- Aquantia AQR112 and AQR412
- Motorcomm YT8531S
- PTP:
- Orolia ART-CARD
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets
- Realtek RTL8852BE and RTL8723DS
- Cypress.CYW4373A0 WiFi + Bluetooth combo device
Drivers:
- CAN:
- gs_usb: bus error reporting support
- kvaser_usb: listen only and bus error reporting support
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping
- implement devlink-rate support
- support direct read from memory
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate
- Support for enhanced events compression
- extend H/W offload packet manipulation capabilities
- implement IPSec packet offload mode
- nVidia/Mellanox (mlx4):
- better big TCP support
- Netronome Ethernet NICs (nfp):
- IPsec offload support
- add support for multicast filter
- Broadcom:
- RSS and PTP support improvements
- AMD/SolarFlare:
- netlink extened ack improvements
- add basic flower matches to offload, and related stats
- Virtual NICs:
- ibmvnic: introduce affinity hint support
- small / embedded:
- FreeScale fec: add initial XDP support
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
- TI am65-cpsw: add suspend/resume support
- Mediatek MT7986: add RX wireless wthernet dispatch support
- Realtek 8169: enable GRO software interrupt coalescing per
default
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support
- add ip6gre support
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support
- enable flow offload support
- Renesas:
- add rswitch R-Car Gen4 gPTP support
- Microchip (lan966x):
- add full XDP support
- add TC H/W offload via VCAP
- enable PTP on bridge interfaces
- Microchip (ksz8):
- add MTU support for KSZ8 series
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support
- add ack signal support
- enable coredump support
- remain_on_channel support
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
- 320 MHz channels support
- RealTek WiFi (rtw89):
- new dynamic header firmware format support
- wake-over-WLAN support"
* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
ipvs: fix type warning in do_div() on 32 bit
net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
net: ipa: add IPA v4.7 support
dt-bindings: net: qcom,ipa: Add SM6350 compatible
bnxt: Use generic HBH removal helper in tx path
IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
selftests: forwarding: Add bridge MDB test
selftests: forwarding: Rename bridge_mdb test
bridge: mcast: Support replacement of MDB port group entries
bridge: mcast: Allow user space to specify MDB entry routing protocol
bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
bridge: mcast: Add support for (*, G) with a source list and filter mode
bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
bridge: mcast: Add a flag for user installed source entries
bridge: mcast: Expose __br_multicast_del_group_src()
bridge: mcast: Expose br_multicast_new_group_src()
bridge: mcast: Add a centralized error path
bridge: mcast: Place netlink policy before validation functions
bridge: mcast: Split (*, G) and (S, G) addition into different functions
bridge: mcast: Do not derive entry type from its filter mode
...
