It looks like test_vxlan_under_vrf.sh is always failing to verify the
connectivity test during the ping between the two simulated VMs.
This is due to the fact that veth-hv in each VM should have a distinct
MAC address.
Fix by setting a unique MAC address on each simulated VM interface.
Without this fix:
$ sudo ./tools/testing/selftests/net/test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [FAIL]
With this fix applied:
$ sudo ./tools/testing/selftests/net/test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ]
Check VM connectivity through VXLAN (underlay in a VRF) [FAIL]
NOTE: the connectivity test with the underlay VRF is still failing; it
seems that ARP requests are blocked at the simulated hypervisor level,
probably due to some missing ARP forwarding rules. This requires more
investigation (in the meantime we may consider to set that test as
expected failure - XFAIL).
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang says:
====================
net: hns3: add some fixes for -net
This series adds some fixes for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, driver only allow configuring ETS bandwidth of TCs according
to the max TC number queried from firmware. However, the hardware actually
supports 8 TCs and users may need to configure ETS bandwidth of all TCs,
so remove the restriction.
Fixes: 330baff542 ("net: hns3: add ETS TC weight setting in SSU module")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If users set unicast mac address for VFs by PF, they need to guarantee all
VFs' address is different. This patch removes the check mac address exist
of VFs, for usrs can refresh mac addresses of all VFs directly without
need to modify the exist mac address to other value firstly.
Fixes: 8e6de441b8 ("net: hns3: add support for configuring VF MAC from the host")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When driver queries the register number of mac statistics from firmware,
the old firmware runs in device version V2 only returns number of valid
registers, not include number of three reserved registers among of them.
It cause driver doesn't record the last three data when query mac
statistics.
To fix this problem, driver never query register number in device version
V2 and set it to a fixed value which include three reserved registers.
Fixes: c8af2887c9 ("net: hns3: add support pause/pfc durations for mac statistics")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the driver processes rx packets, the head pointer is updated only
after the number of received packets reaches 16. However, hardware
relies on the head pointer to calculate the number of FBDs. As a result,
the hardware calculates the FBD incorrectly. Therefore, the driver
proactively updates the head pointer in each common poll to ensure that
the number of FBDs calculated by the hardware is correct.
Fixes: 68752b24f5 ("net: hns3: schedule the polling again when allocation fails")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, driver will send command to firmware to query pfc packet number
when user uses dcb tool to get pfc parameters. However, the periodic
service task will also periodically query and record MAC statistics,
including pfc packet number.
As the hardware registers of statistics is cleared after reading, it will
cause pfc packet number of MAC statistics are not correct after using dcb
tool to get pfc parameters.
To fix this problem, when user uses dcb tool to get pfc parameters, driver
updates MAC statistics firstly and then get pfc packet number from MAC
statistics.
Fixes: 64fd2300fc ("net: hns3: add support for querying pfc puase packets statistic")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, NIC init ROCE interrupt vector with MSIX interrupt. But ROCE use
pci_irq_vector() to get interrupt vector, which adds the relative interrupt
vector again and gets wrong interrupt vector.
So fixes it by assign relative interrupt vector to ROCE instead of MSIX
interrupt vector and delete the unused struct member base_msi_vector
declaration of hclgevf_dev.
Fixes: 46a3df9f97 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when driver is failed to add a new multicast mac address to
hardware due to the multicast mac table is full, it will directly return.
In this case, if the multicast mac list has some reuse addresses after the
new address, those reuse addresses will never be added to hardware.
To fix this problem, if function hclge_add_mc_addr_common() returns
-ENOSPC, hclge_sync_vport_mac_list() should judge whether continue or
stop to add next address.
As function hclge_sync_vport_mac_list() needs parameter mac_type to know
whether is uc or mc, refine this function to add parameter mac_type and
remove parameter sync. So does function hclge_unsync_vport_mac_list().
Fixes: ee4bcd3b7a ("net: hns3: refactor the MAC address configure")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge assorted fixes and cleanups and one new backlight quirk list
item for 5.16-rc1.
* acpica:
ACPI: Drop ACPI_USE_BUILTIN_STDARG ifdef from acgcc.h
* acpi-ec:
ACPI: EC: Remove initialization of static variables to false
ACPI: EC: Use ec_no_wakeup on HP ZHAN 66 Pro
* acpi-pmic:
ACPI: PMIC: Fix intel_pmic_regs_handler() read accesses
* acpi-video:
ACPI: video: use platform backlight driver on Xiaomi Mi Pad 2
ACPI: video: Drop dmi_system_id.ident settings from video_detect_dmi_table[]
Merge new ACPI device configuration object _DSC support for 5.16-rc1.
* acpi-dsc:
Documentation: ACPI: Fix non-D0 probe _DSC object example
at24: Support probing while in non-zero ACPI D state
media: i2c: imx319: Support device probe in non-zero ACPI D state
ACPI: Add a convenience function to tell a device is in D0 state
Documentation: ACPI: Document _DSC object usage for enum power state
i2c: Allow an ACPI driver to manage the device's power state during probe
ACPI: scan: Obtain device's desired enumeration power state
The original patch adding the example used _DSC Name when Method was
intended. Fix this.
Also replace spaces used for indentation with tabs in the example.
Fixes: ed66f12ba4 ("Documentation: ACPI: Document _DSC object usage for enum power state")
Reported-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 4873586278 ("Input: iforce - use DMA-safe buffer when getting IDs from USB")
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: stable@vger.kernel.org # 5.3
Link: https://lore.kernel.org/r/20211025115501.5190-1-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The comment about the reused vmalloc helpers is no longer valid after
the recent change for the noncontig allocator. Drop the stale
comment.
Fixes: ad4f93ca41 ("ALSA: memalloc: Use proper SG helpers for noncontig allocations")
Link: https://lore.kernel.org/r/20211110063100.21359-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Modern devices may redraw display at 60 Hz, make sure we have one input
sample per one frame. Reduce sample period to 15ms, so we would get up
to 66.6 samples per second, although realistically with all the jitter
and extra scheduling wiggle room, we would end up just above 60 samples
per second. This should be a good compromise between sampling too often
and sampling too seldom.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20211108114145.84118-1-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently the ili210x driver implements a threaded interrupt handler which
starts upon edge on the interrupt line, and then polls the touch controller
for samples. Every time a sample is obtained from the controller, the thread
function checks whether further polling is required, and if so, waits fixed
amount of time before polling for next sample.
The delay between consecutive samples can thus vary greatly, because the
I2C transfer required to retrieve the sample from the controller takes
different amount of time on different platforms. Furthermore, different
models of the touch controllers supported by this driver require different
delays during retrieval of samples too.
Instead of waiting fixed amount of time before polling for next sample,
determine how much time passed since the beginning of sampling cycle and
then wait only the remaining amount of time within the sampling cycle.
This makes the driver deliver samples with equal spacing between them.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20211108005216.480525-1-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The ili251x touch controller needs 5ms delay between sending I2C device
address and register address, and, writing or reading register data.
According to downstream ili251x example code, this 5ms delay is not
required when reading touch samples out of the controller. Implement
such a special case.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20211108005259.480545-1-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some firmwares occasionally report bogus data from trackpoint, with X or Y
displacement being too large (outside of [-127, 127] range). Let's drop such
packets so that we do not generate jumps.
Signed-off-by: Phoenix Huang <phoenix@emc.com.tw>
Tested-by: Yufei Du <yufeidu@cs.unc.edu>
Link: https://lore.kernel.org/r/20210729010940.5752-1-phoenix@emc.com.tw
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There is a spelling mistake in a dev_info message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/20211108201817.43121-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
blank screen and other display rates fixes, and more.
Four patches targeting stable in here.
Display Fixes:
- DP rates related fixes (Imre, Jani)
- A Revert on disaling dual eDP that was causing state readout problems (Jani)
- put the cdclk vtables in const data (Jani)
- Fix DVO port type for moder platforms (Ville)
- Fix blankscreen by turning DP++ TMDS output buffers on encoder->shutdown (Ville)
- CCS FBs related fixes (Imre)
GT fixes:
- Fix recursive lock in GuC submission (Matt Brost)
- Revert guc_id from i915_request tracepoint (Joonas)
- Build fix around dmabuf (Matt Auld)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmGLAXwACgkQ+mJfZA7r
E8rCbwf9EDwnn35GYmATgf0wDiXmZRJHlFqRgLcPs5o9P+4MXDvPAKINCTXJBxr6
+TpA+ZYsTHh58P9FmoGLu1btBasEACjeoiMFL5u4RVUPOQUd0qwBmXHjSHzJ+y6E
eA8hrtYVVfc9/Z3QFLybxyZNzw8s7a9BUZoBCjr0AiUfp0BdqzplIU2LpnsPyw9S
Q7UbMRyiMNd7iOndVCamfDnTbVBFRvv6WEbxveCjLL3ud02fpWywBN+CryQ3ZQs0
5gco7H/gpCrLHysJbBa60DPM6NL0JKxXvRU0aSXP2WY6ONFzc6jULYYtkRLMHjc3
NLuQlx5uBCf863h6k3shIzlNHCvF+Q==
=aRFO
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-fixes-2021-11-09' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Couple Reverts, build fix, couple virtualization fixes,
blank screen and other display rates fixes, and more.
Four patches targeting stable in here.
Display Fixes:
- DP rates related fixes (Imre, Jani)
- A Revert on disaling dual eDP that was causing state readout problems (Jani)
- put the cdclk vtables in const data (Jani)
- Fix DVO port type for moder platforms (Ville)
- Fix blankscreen by turning DP++ TMDS output buffers on encoder->shutdown (Ville)
- CCS FBs related fixes (Imre)
GT fixes:
- Fix recursive lock in GuC submission (Matt Brost)
- Revert guc_id from i915_request tracepoint (Joonas)
- Build fix around dmabuf (Matt Auld)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YYsBif3HMi8GjLoU@intel.com
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYYTgewAKCRDj7w1vZxhR
xafyAP4wA76Bmx4yvNXMoeD8ptKGzNfioK2Dg4JLDxbfOspt3gEA+jLfCFZ/UZD0
6lJxH0nJmRkA9rAg5TWl98YqiF3iYg0=
=7kMT
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2021-11-05' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
A refcounting fix for outstanding fence callbacks.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211105074318.oy6rwjr5wcw6qpjj@gilmour
Model 88E6191X only supports >1G speeds on port 10. Port 0 and 9 are
only 1G.
Fixes: de776d0d31 ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20211104171747.10509-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver has its own sysfs file to adjust the clock. Fortunately, it is
already in pbb, however, the sign it expects is the opposite of what the
RTC core does (which actually aligns with the RTC).
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211107225458.111068-12-alexandre.belloni@bootlin.com
Tell the RTC core UIE are not supported because the resolution of the alarm
is a minute.
Note that this is in fact also fixing how the resolution is reported as the
previous test was simply ensuring the alarm was more than a minute in the
future while the register has a minute resolution.
This would be ok if the alarm was a countdown but ab8500_rtc_read_alarm
suggests otherwise and the AB8500 datasheet states that the RTC
documentation is not public.
Finally, the comment is wrong and what makes the UIE emulation work is
uie_unsupported being set.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211107225458.111068-6-alexandre.belloni@bootlin.com
Handle alarms with a minute resolution in the core. Until now drivers have
been open coding the seconds part removal and have been doing that wrongly.
Most of them are rounding up which means the allow the system to miss
deadlines. So, round down and let __rtc_set_alarm return immediately if the
time has already passed.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211107225458.111068-1-alexandre.belloni@bootlin.com
Alexei Starovoitov says:
====================
pull-request: bpf 2021-11-09
We've added 7 non-merge commits during the last 3 day(s) which contain
a total of 10 files changed, 174 insertions(+), 48 deletions(-).
The main changes are:
1) Various sockmap fixes, from John and Jussi.
2) Fix out-of-bound issue with bpf_pseudo_func, from Martin.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: sk_skb data_end access incorrect when src_reg = dst_reg
bpf: sockmap, strparser, and tls are reusing qdisc_skb_cb and colliding
bpf, sockmap: Fix race in ingress receive verdict with redirect to self
bpf, sockmap: Remove unhash handler for BPF sockmap usage
bpf, sockmap: Use stricter sk state checks in sk_lookup_assign
bpf: selftest: Trigger a DCE on the whole subprog
bpf: Stop caching subprog index in the bpf_pseudo_func insn
====================
Link: https://lore.kernel.org/r/20211109215702.38350-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ctrl is set from read_regs(..FLAG, 2, ctrl), so ctrl[0] is FLAG
and ctrl[1] is the CTRL register.
Use ctrl[0] to write back to the FLAG register as appropriate.
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211101013400.325855-1-dominique.martinet@atmark-techno.com
[Why]
We need HPD IRQ notifications (RX, short pulse) to properly handle
DP MST for DPIA connections.
[How]
A null pointer exception currently occurs when these are received
so add a check to validate that we have a handler installed for
the notification.
Extend the HPD handler to also handle HPD IRQ (RX) since the logic is
the same.
Fixes: e27c41d5b0 ("drm/amd/display: Support for DMUB HPD interrupt handling")
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Jude Shih <shenshih@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Per DRM spec we only need to hold that lock when touching
connector->state - which we do not do in that handler.
Taking this locking introduces unnecessary dependencies with other
threads which is bad for performance and opens up the potential for
a deadlock since there are multiple locks being held at once.
[How]
Remove the connection_mutex lock/unlock routine and just iterate over
the drm connectors normally. The iter helpers implicitly lock the
connection list so this is safe to do.
DC link access also does not need to be guarded since the link
table is static at creation - we don't dynamically add or remove links,
just streams.
Fixes: e27c41d5b0 ("drm/amd/display: Support for DMUB HPD interrupt handling")
Reviewed-by: Jude Shih <shenshih@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Trivial patch which adds a comment for macro
endif's in amdgpu_dm.c
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The check for whether to drain retry faults must be under the mmap write
lock to serialize with munmap notifier callbacks.
We were also missing checks on child ranges. To fix that, simplify the
logic by using a flag rather than checking on each prange. That also
allows draining less freqeuntly when many ranges are unmapped at once.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Alex Sierra <Alex.Sierra@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The low 16MB of virtual address space are currently reserved for kernel
mode allocations mapped into user virtual address space. This causes
conflicts with HMM/SVM mappings at low virtual addresses. We tried to
move those kernel mode allocations to the upper half of the 64-bit
virtual address space for GFX9, which is naturally reserved for kernel
use. However, TBA (trap handler code) has problems to access addresses
in the high virtual space. We have decided to set this to 8KB of the
lower address space as a temporary fix, while investigate TBA address
problem. It is very unlikely for user space to map memory at this low
region.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
make action upon failure in "drm_atomic_add_affected_connectors()"
consistent with the rest of failures in amdgpu_dm_atomic_check().
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The KFD pre_reset should be called before reset been executed, it will
hold the lock to prevent other rocm process to sent the packlage to hiq
during host execute the real reset on the HW
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
