Pull drm fixes from Dave Airlie:
"Not a huge amount happening, some MAINTAINERS updates, radeon, vmwgfx
and tegra fixes"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/vmwgfx: avoid null pointer dereference at failure paths
drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
drm/vmwgfx: Remove some unused surface formats
drm/radeon: enable speaker allocation setup on dce3.2
drm/radeon: change audio enable logic
drm/radeon: fix audio disable on dce6+
drm/radeon: free uvd ring on unload
drm/radeon: disable pll sharing for DP on DCE4.1
drm/radeon: fix missing bo reservation
drm/radeon: print the supported atpx function mask
MAINTAINERS: update drm git tree entry
MAINTAINERS: add entry for drm radeon driver
drm/tegra: Add guard to avoid double disable/enable of RGB outputs
gpu: host1x: do not check previously handled gathers
drm/tegra: fix typo 'CONFIG_TEGRA_DRM_FBDEV'
more radeon fixes
* 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: enable speaker allocation setup on dce3.2
drm/radeon: change audio enable logic
drm/radeon: fix audio disable on dce6+
drm/radeon: free uvd ring on unload
drm/radeon: disable pll sharing for DP on DCE4.1
drm/radeon: fix missing bo reservation
drm/radeon: print the supported atpx function mask
Apparently we've missed a few more than what Fengguang's 0-day tester
recently reported in i915_irq.c ... Makes sparse happy again (ignore
some spurious stuff about ksyms of exported functions).
Cc: kbuild test robot <fengguang.wu@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
vmw_takedown_otable_base() and vmw_mob_unbind() check for
potential vmw_fifo_reserve() failure and print error message,
but then immediately dereference NULL pointer.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Backing mob contents is propagated to user-space, so make sure backing
mobs are cleared when allocated. This also accidently fix rendering errors
with celestia when emulating legacy mode.
Also update driver date.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Now that we disable audio while setting up the audio
hw, we should be able to set this up without hangs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Disable audio around audio hw setup. This may avoid
hangs on certain asics.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Properly clear the enable bit when audio disable is requested.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Need to free the uvd ring. Also reshuffle gart tear down to
happen after uvd tear down.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Causes display problems. We had already disabled
sharing for non-DP displays.
Based on a patch from:
Niels Ole Salscheider <niels_ole@salscheider-online.de>
bug:
https://bugzilla.kernel.org/show_bug.cgi?id=58121
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Otherwise we might get a crash here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print the supported functions mask in addition to
the version. This is useful in debugging PX
problems since we can see what functions are available.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
- Fix for a recent probing regression in the nouveau driver introduced
by an ACPI change related to the handling of _DSM from Jiang Liu.
- Fix for a dock station sysfs attribute that stopped working correctly
after recent changes in the ACPI core.
- cpufreq fix taking care of broken code related to CPU removal and
overlooked by a previous recent fix in that area. From Viresh Kumar.
- Two intel_pstate fixes related to Baytrail support added during
the 3.13 cycle (candidates for -stable) from Dirk Brandewie.
- ACPI video fix removing duplicate brightness values from the _BCL
table which makes its user space interface behave sanely. From
Hans de Goede.
- Fix for the powernow-k8 cpufreq driver making it initialize its
per-CPU data structures correctly from Srivatsa S. Bhat.
- Fix for an obscure memory leak in the ACPI PCI interrupt allocation
code (related to ISA) from Tomasz Nowicki.
- ACPI video blacklist changes moving several systems that should
use the native backlight interface instead of the ACPI one from
the general ACPI _OSI blacklist the the ACPI video driver's
blacklist where they belong. This consists of an ACPI video
driver update from Aaron Lu and a revert of a previous commit
adding systems to the ACPI _OSI blacklist requested by Takashi Iwai.
- Several fixes for build issues in ACPI drivers occuring when
CONFIG_PM_SLEEP is unset from Shuah Khan.
- Fix for an sscanf() format string in the ACPI Smart Battery
Subsystem (SBS) driver from Luis G.F.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=5gW2
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
"These include two fixes for recent regressions related to ACPI, a
cpufreq fix for breakage overlooked by a previous fix commit, two
intel_pstate fixes for stuff added during the 3.13 cycle that need to
go into -stable, three fixes for older bugs that also are -stable
candidates, ACPI video blacklist changes related to BIOSes that behave
in a special way on Windows 8, several build fixes for CONFIG_PM_SLEEP
unset in ACPI drivers and an ACPI driver cleanup.
Specifics:
- Fix for a recent probing regression in the nouveau driver
introduced by an ACPI change related to the handling of _DSM from
Jiang Liu.
- Fix for a dock station sysfs attribute that stopped working
correctly after recent changes in the ACPI core.
- cpufreq fix taking care of broken code related to CPU removal and
overlooked by a previous recent fix in that area. From Viresh
Kumar.
- Two intel_pstate fixes related to Baytrail support added during the
3.13 cycle (candidates for -stable) from Dirk Brandewie.
- ACPI video fix removing duplicate brightness values from the _BCL
table which makes its user space interface behave sanely. From
Hans de Goede.
- Fix for the powernow-k8 cpufreq driver making it initialize its
per-CPU data structures correctly from Srivatsa S Bhat.
- Fix for an obscure memory leak in the ACPI PCI interrupt allocation
code (related to ISA) from Tomasz Nowicki.
- ACPI video blacklist changes moving several systems that should use
the native backlight interface instead of the ACPI one from the
general ACPI _OSI blacklist the the ACPI video driver's blacklist
where they belong. This consists of an ACPI video driver update
from Aaron Lu and a revert of a previous commit adding systems to
the ACPI _OSI blacklist requested by Takashi Iwai.
- Several fixes for build issues in ACPI drivers occuring when
CONFIG_PM_SLEEP is unset from Shuah Khan.
- Fix for an sscanf() format string in the ACPI Smart Battery
Subsystem (SBS) driver from Luis G.F"
* tag 'pm+acpi-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_pstate: Add support for Baytrail turbo P states
intel_pstate: Use LFM bus ratio as min ratio/P state
ACPI / nouveau: fix probing regression related to _DSM
Revert "ACPI: Blacklist Win8 OSI for some HP laptop 2013 models"
ACPI / video: Add systems that should favour native backlight interface
ACPI / video: Filter the _BCL table for duplicate brightness values
cpufreq: powernow-k8: Initialize per-cpu data-structures properly
cpufreq: remove sysfs link when a cpu != policy->cpu, is removed
ACPI / PCI: Fix memory leak in acpi_pci_irq_enable()
ACPI / dock: Make 'docked' sysfs attribute work as documented
ACPI / SBS: Fix incorrect sscanf() string
ACPI / thermal: fix thermal driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / SBS: fix SBS driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / fan: fix fan driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / button: fix button driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / battery: fix battery driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / AC: fix AC driver compile error when CONFIG_PM_SLEEP is undefined
Fix regression caused by commit b072e53, which breaks loading nouveau
driver on optimus laptops.
On some platforms, ACPI _DSM method (nouveau_op_dsm_muid, function 0)
has special requirements on the fourth parameter, which is different
from ACPI specifications. So revert to the private implementation
to check availability of _DSM functions instead of using common
acpi_check_dsm() interface.
Fixes: b072e53b0a (ACPI / nouveau: replace open-coded _DSM code with helper functions)
Reported-and-tested-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
[rjw: Subject]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
These patches contain a fix for a potential hang when the RGB output is
disabled twice, a typofix that prevents the framebuffer console from
being restored on ->lastclose() and an optimization to do as little work
as possible during host1x job submission.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=pQjy
-----END PGP SIGNATURE-----
Merge tag 'drm/for-3.14-rc3' of git://anongit.freedesktop.org/tegra/linux into drm-fixes
drm/tegra: Fixes for v3.14-rc3
These patches contain a fix for a potential hang when the RGB output is
disabled twice, a typofix that prevents the framebuffer console from
being restored on ->lastclose() and an optimization to do as little work
as possible during host1x job submission.
* tag 'drm/for-3.14-rc3' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: Add guard to avoid double disable/enable of RGB outputs
gpu: host1x: do not check previously handled gathers
drm/tegra: fix typo 'CONFIG_TEGRA_DRM_FBDEV'
Pull request of 2014-02-18
One compile fix and one memory leak.
* tag 'ttm-fixes-3.14-2014-02-18' of git://people.freedesktop.org/~thomash/linux:
drm/ttm: Fix memory leak in ttm_agp_backend.c
drm/ttm: declare 'struct device' in ttm_page_alloc.h
Pull request of 2014-02-18.
Nothing special. The biggest change is adding a couple of command defines and
packing the command data correctly.
* tag 'vmwgfx-fixes-3.14-2014-02-18' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Fix command defines and checks
drm/vmwgfx: Fix possible integer overflow
drm/vmwgfx: Remove stray const
drm/vmwgfx: unlock on error path in vmw_execbuf_process()
drm/vmwgfx: Get maximum mob size from register SVGA_REG_MOB_MAX_SIZE
drm/vmwgfx: Fix a couple of sparse warnings and errors
The CP semaphore queue on CIK has a bug that triggers if uncompleted
waits use the same address while a signal is still pending. Work around
this by using different addresses for each sync.
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static checkers complain that probably curly braces were intended here,
but actually it makes more sense to remove the extra tab.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Most laptops seems to have a vblank period of less than
300 and mclk switching works fine. Drop the quirk and
set the default threshold to 200.
bug:
https://bugzilla.kernel.org/show_bug.cgi?id=70701
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some hardware may not support standard 64x64 cursors. Add
a drm cap to query the cursor size from the kernel. Some examples
include radeon CIK parts (128x128 cursors) and armada (32x64 or 64x32).
This allows things like device specific ddxes to remove asics specific
logic and also allows xf86-video-modesetting to work properly with hw
cursors on this hardware. Default to 64 if the driver doesn't specify
a size.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
We were already storing the bpc (bits per color) information
in radeon_crtc, so just use that everywhere rather than
calculating it everywhere we use it. This also allows us
to change it in one place if we ever want to override it.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fix a memory leak found by cppcheck.
[drivers/gpu/drm/ttm/ttm_agp_backend.c:129]:
(error) Memory leak: agp_be
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Nothing too exciting, mostly fixes for ancient boards, but a pretty important fix for DP on some systems.
Thanks,
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau: fix TTM_PL_TT memtype on pre-nv50
drm/nv50/disp: use correct register to determine DP display bpp
drm/nouveau/fb: use correct ram oclass for nv1a hardware
drm/nv50/gr: add missing nv_error parameter priv
drm/nouveau: fix ENG_RUNLIST register address
drm/nv4c/bios: disallow retrieving from prom on nv4x igp's
drm/nv4c/vga: decode register is in a different place on nv4x igp's
drm/nv4c/mc: nv4x igp's have a different msi rearm register
drm/nouveau: set irq_enabled manually
3 fixes plus 1 prep patch, all four cc: stable. Jani will take over from
here and the plan is that he'll do 3.14-fixes for the entire release just
to work things out a bit.
* tag 'drm-intel-fixes-2014-02-14' of ssh://git.freedesktop.org/git/drm-intel:
drm/i915/dp: add native aux defer retry limit
drm/i915/dp: increase native aux defer retry timeout
drm/i915: Prevent MI_DISPLAY_FLIP straddling two cachelines on IVB
drm/i915: Add intel_ring_cachline_align()
fix for leak in tda998x
* 'tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox:
drm/i2c: tda998x: Fix memory leak in tda998x_encoder_init error path.
Commit a55409066 ("drm/nv50-: map TTM_PL_SYSTEM through a BAR for CPU
access") made it possible to work with tiled memory. However
mem->mm_node is not a nouveau_mem for AGP-using pre-NV50 cards, but a
drm_mm_node, as created by the ttm_bo_manager_func. As such, extend the
untiled check to explicitly include all pre-nv50 cards.
Reported-by: Ronald <ronald645@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74613
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Ronald Uitermark <ronald645@gmail.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Commit 0a0afd282f ("drm/nv50-/disp: move DP link training to core and
train from supervisor") added code that uses the wrong register for
computing the display bpp, used for bandwidth calculation. Adjust to use
the same register as used by exec_clkcmp and nv50_disp_intr_unk20_2_dp.
Reported-by: Torsten Wagner <torsten.wagner@gmail.com>
Reported-by: Michael Gulick <mgulick@mathworks.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67628
Cc: stable@vger.kernel.org # 3.9+
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
commit 8613e7314a
Author: Ben Skeggs <bskeggs@redhat.com>
Date: Mon Oct 21 08:50:25 2013 +1000
drm/nouveau/fb: remove ram oclass argument from base fb constructor
Introduced a unfortunate regression by using nv10 ram oclass for nv1a
hardware, causing corruption and eventually system lockup.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74866
Reported-by: John F. Godfrey <jfgodfrey@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Cc: stable@vger.kernel.org # 3.13+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Commit ea7dce901 ("drm/nv50/gr: print mpc trap name when it's not an mp
trap") added an nv_error call that was missing the priv parameter. This
causes GPFs if the error is ever hit.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Address of the ENG_RUNLIST register should be 0x002284 + (engine * 8),
not 0x002284 + (engine * 4).
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
See https://bugs.freedesktop.org/show_bug.cgi?id=74492
Reported-by: Ronald <ronald645@gmail.com>
Suggested-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Since commit 0fa9061ae8 ("drm/nouveau/mc: handle irq-related setup
ourselves"), drm_device->irq_enabled remained unset. This is needed in
order to properly wait for a vblank event in the generic drm code.
See https://bugs.freedesktop.org/show_bug.cgi?id=74195
Reported-by: Jan Janecek <janjanjanx@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Spotted while auditing the code for fencing issues.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Looks like I've missed one of the potential NULL deref bugs in Jesse's
fbdev->fb embedded struct to pointer conversions. Fix it up.
This regression has been introduced in
commit 8bcd45534d
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Fri Feb 7 12:10:38 2014 -0800
drm/i915: alloc intel_fb in the intel_fbdev struct
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
One side-effect of the introduction of ppgtt was that we needed to
rebind the object into the appropriate vm (and global gtt in some
peculiar cases). For simplicity this was done twice for every object on
every call to execbuffer. However, that adds a tremendous amount of CPU
overhead (rewriting all the PTE for all objects into WC memory) per
draw. The fix is to push all the decision about which vm to bind into
and when down into the low-level bind routines through hints rather than
performing the bind unconditionally in the execbuffer routine.
Note that this is a regression introduced in the full ppgtt feature
branch, before this we've only done re-bound objects when the relevant
has_(aliasing_ppgtt|global_gtt)_mapping flag was clear. But since
that's per-object and not per-vma that optimization broke.
v2: Split out prep work and unrelated changes.
v3: Bring back functional change around PIN_GLOBAL that I've
accidentally split out.
v4: Remove the temporary hack for the old binding logic to avoid
bisection issues.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72906
Tested-by: jianx.zhou@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is prep work for reworking the object_pin logic. Atm
it still does a (now redundant) lookup of the vma. The next
patch will fix this.
Split out from Chris vma-bind rework.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Split out from Chris vma-bind rework.
Jani wondered why this is save, and the reason is that i915_vma_unbind
does all these checks, too. So they're redundant.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There's no need not to, really.
Split out from Chris vma-bind rework.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Only the hardware really access them, so no need to have cpu
gtt access available.
Split out from Chris vma-bind rework.
Note that this is only possible due to the split-up of the mappable
pin flag into PIN_GLOBAL and PIN_MAPPABLE.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Split out from Chris vma-bind rework.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We access it through the cpu window. No functional difference expected
atm since we default to a bottom-up allocation scheme. But that might
eventually change so that we prefer the unmappable range for buffers
that don't need cpu gtt access.
Split out from Chris vma-bind rework.
Note that this is only possible due to the split-up of the mappable
pin flag into PIN_GLOBAL and PIN_MAPPABLE.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tighter code since legacy gem has only mappable anyway.
Split out from Chris vma-bind rework.
Note that this is only possible due to the split-up of the mappable
pin flag into PIN_GLOBAL and PIN_MAPPABLE.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Split out from Chris vma-bind rework.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With abitrary pin flags it makes sense to split out a "please bind
this into global gtt" from the "please allocate in the mappable
range".
Use this unconditionally in our global gtt pin helper since this is
what its callers want. Later patches will drop PIN_MAPPABLE where it's
not strictly needed.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Anything more than just one bool parameter is just a pain to read,
symbolic constants are much better.
Split out from Chris' vma-binding rework patch.
v2: Undo the behaviour change in object_pin that Chris spotted.
v3: Split out misplaced hunk to handle set_cache_level errors,
spotted by Jani.
v4: Keep the current over-zealous binding logic in the execbuffer code
working with a quick hack while the overall binding code gets shuffled
around.
v5: Reorder the PIN_ flags for more natural patch splitup.
v6: Pull out the PIN_GLOBAL split-up again.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is the same what we do for DP connectors, so make things more
consistent.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Antti Koskipää <antti.koskipaa@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Antti Koskipää <antti.koskipaa@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Atm we set the parent of the dp i2c device to be the correspondig
connector device. During driver cleanup we first remove the connector
device through intel_modeset_cleanup()->drm_sysfs_connector_remove() and
only after that the i2c device through the encoder's destroy callback.
This order is not supported by the device core and we'll get a warning,
see the below bugzilla ticket. The proper order is to remove first any
child device and only then the parent device.
The first part of the fix changes the i2c device's parent to be the drm
device. Its logical owner is not the connector anyway, but the encoder.
Since the encoder doesn't have a device object, the next best choice is
the drm device. This is the same what we do in the case of the sdvo i2c
device and what the nouveau driver does.
The second part creates a symlink in the connector's sysfs directory
pointing to the i2c device. This is so, that we keep the current ABI,
which also makes sense in case someone wants to look up the i2c device
belonging to a specific connector.
Reference: http://lists.freedesktop.org/archives/intel-gfx/2014-January/038782.html
Reference: http://lists.freedesktop.org/archives/intel-gfx/2014-February/039427.html
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70523
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Antti Koskipää <antti.koskipaa@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since
commit d9255d5714
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date: Thu Sep 26 20:05:59 2013 -0300
it became clear that we need to separate the unload sequence into two
parts:
1. remove all interfaces through which new operations on some object
(crtc, encoder, connector) can be started and make sure all pending
operations are completed
2. do the actual tear down of the internal representation of the above
objects
The above commit achieved this separation for connectors by splitting
out the sysfs removal part from the connector's destroy callback and
doing this removal before calling drm_mode_config_cleanup() which does
the actual tear-down of all the drm objects.
Since we'll have to customize the interface removal part for different
types of connectors in the upcoming patches, add a new unregister
callback and move the interface removal part to it.
No functional change.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Antti Koskipää <antti.koskipaa@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Coverity points out that, if we end up in the 'failed' label, that's
precisely because we couldn't retrieve a fixed mode (ie fixed_mode is
NULL) and then "if (fixed_mode)" is always false.
Remove that dead code.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Commit 6ae668cc19 (drm/i2c: tda998x: check the CEC device creation)
introduced a memory leak in the error path of tda998x_encoder_init
Picked up by the nightly Coverity scan. CID 1174076
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Retrying indefinitely places too much trust on the aux implementation of
the sink devices.
Reported-by: Daniel Martin <consume.noise@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71267
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Tested-by: Theodore Ts'o <tytso@mit.edu>
Tested-by: Sree Harsha Totakura <freedesktop@h.totakura.in>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Give more slack to sink devices before retrying on native aux
defer. AFAICT the 100 us timeout was not based on the DP spec.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org (on Jani's request)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It can be corrected later and may be what was actually desired, but
generally isn't, so if we find nothing is enabled, let the core DRM fb
helper figure something out.
v2: free the array too (Jesse)
Note that this also undoes any changes in case we bail out due to hw
cloning.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This will make the code more readable, and extensible which is needed
for upcoming feature work. Eventually, we'll do the same for init.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We have a couple of switch cases to compute the port value for the
VIDEO_DIP_CTL register. Replace them with a simple macro.
We do lose a few BUG() calls, but many people may consider that
an improvement.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
... past the check for DRIVER_MODESET. Avoids races with userspace
opening a master and our sarea setup.
Cc: Signed-off-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We assign the sarea_priv pointer only in the dma ioctl, which is
disallowed when kernel modesetting is enabled. So this is dead code.
Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The BIOS or boot loader will generally create an initial display
configuration for us that includes some set of active pipes and
displays. This routine tries to figure out which pipes and connectors
are active and stuffs them into the crtcs and modes array given to us by
the drm_fb_helper code.
The overall sequence is:
intel_fbdev_init - from driver load
intel_fbdev_init_bios - initialize the intel_fbdev using BIOS data
drm_fb_helper_init - build fb helper structs
drm_fb_helper_single_add_all_connectors - more fb helper structs
intel_fbdev_initial_config - apply the config
drm_fb_helper_initial_config - call ->probe then register_framebuffer()
drm_setup_crtcs - build crtc config for fbdev
intel_fb_initial_config - find active connectors etc
drm_fb_helper_single_fb_probe - set up fbdev
intelfb_create - re-use or alloc fb, build out fbdev structs
v2: use BIOS connector config unconditionally if possible (Daniel)
check for crtc cloning and reject (Daniel)
fix up comments (Daniel)
v3: use command line args and preferred modes first (Ville)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Re-add the WARN_ON for a missing encoder crtc - the state
sanitizer should take care of this. And spell-ocd the comments.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This allows drivers to use them in custom initial_config functions.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just a bit of polish which I hope will help me with massaging some
internal patches to use Imre's reworked pipestat handling:
- Don't check for underrun reporting or enable pipestat interrupts
twice.
- Frob the comments a bit.
- Do the iir PIPE_EVENT to pipe mapping explicitly with a switch. We
only have one place which does this, so better to make it explicit.
v2: Ville noticed that I've broken the logic a bit with trying to
avoid checking whether we're interested in a given pipe twice. push
the PIPESTAT read down after we've computed the mask of interesting
bits first to avoid that duplication properly.
v3: Squash in fixups from Imre on irc.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make sure all guest-backed object commands are properly packed.
Have the command verifier treat uninitialized command entries as invalid
rather than dereferencing NULL pointers.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
Reported-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
We want to reuse this in the fbdev initial config code independently
from any fastboot hacks. So allow a bit more flexibility.
v2: Forgot to git add ...
v3: make non-static (Jesse)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We want to do this early on before we try to fetch the plane config,
which depends on some of the pipe config state.
Note that the important part is that we do this before we initialize
gem, since otherwise we can't properly pre-reserve the stolen memory
for framebuffers inherited from the bios.
v2: split back out from get_plane_config change (Daniel)
update for recent locking & reset changes (Jesse)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Explain a bit more why we need to move this.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
So far during driver unload we called drm_framebuffer_cleanup() for the
fbdev fb, which only removes the fb from the drm fb list regardless of
its reference count, but leaves the fb bound on an active crtc. Since
the fb's backing storage was freed this could mean we scan some random
memory content out afterwards. It's not a big issue since the fb is
allocated from stolen memory and afaik there is no other user for that
than i915. It's still cleaner to properly unbind the fb and disable the
crtc, which is what drm_framebuffer_remove() does.
Note that after
commit 88891eb1e9eca0ba619518bed31580f91e9cf84d
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Feb 10 18:00:38 2014 +0100
we call drm_framebuffer_cleanup() only after dropping the last reference
on the fb, but that won't happen since we don't unbind the fb. This
results in a drm core warn about a leaked fb.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Everything can be overridden by module parameters, so don't confuse the
users that are using them.
We have RC6 turned on for all platforms which support it, but Ironlake,
so the need to explain the situation is no longer pressing.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Deepak S <deepak.s@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It wasn't ever used by the caller anyway with the exception of what we
show in sysfs.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Deepak S <deepak.s@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
[danvet: Apply Deepak's suggestion.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
At one time, we though all future platforms would have the deeper RC6
states. As it turned out, they killed it after Ivybridge, and began
using other means to achieve the power savings (the stuff we need to get
to PC7+).
The enable function was left in a weird state of odd corner cases as a
result. Since the future is now, and we also have some insight into
what's currently the future, we have an opportunity to simplify, and
future proof the function.
NOTE: VLV will be addressed in a subsequent patch. This patch was trying
not to change functionality.
NOTE2: All callers sanitize the return value anyway, so this patch is
simply to have the code make a bit more sense.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Deepak S <deepak.s@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
... and QUIRK_PIPEA_FORCE is not present.
I initially thought that case was impossible and just added a WARN on
it, but then I was told this case is possible due to
QUIRK_PIPEA_FORCE. So let's add a WARN that serves two purposes:
- tell us in case we have done something wrong;
- document the only case where we expect this.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a nice comment explaining why we shouldn't wait for a vblank on
all cases, wait based on the HW gen, and add a comment saying we
should probably skip that wait on some of the previous HW gens.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that we pass struct intel_crtc as an argument, we can check for
DSI inside the function, removing one more of those confusing boolean
arguments.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that we pass struct intel_crtc as an argument, there's no need for
it.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We want to remove those 3 boolean arguments. This is the first step.
The "pipe" passed as the argument is always intel_crtc->pipe.
Also adjust the function documentation.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When I forked haswell_crtc_enable I copied all the code from
ironlake_crtc_enable. The last piece of the function contains a big
comment with a call to intel_wait_for_vblank. After this fork, we
rearranged the Haswell code so that it enables the planes as the very
last step of the modeset sequence, so we're sure that we call
intel_enable_primary_plane after the pipe is really running, so the
vblank waiting functions work as expected. I really believe this is
what fixes the problem described by the big comment, so let's give it
a try and get rid of that intel_wait_for_vblank, saving around 16ms
per modeset (and init/resume). We can always revert if needed :)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Because on Haswell, the pipe is never running at this point, so we hit
the 50ms timeout waiting for nothing. We already have two other places
where we wait for vblanks on haswell_crtc_enable, so we're safe.
This gets us rid of one instance of "vblank wait timed out" for each
mode set, which means driver init and resume are also 50ms faster.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Depending on the HW gen and the connector type, the pipe won't start
running right after we call intel_enable_pipe, so that
intel_wait_for_vblank call we currently have will just sit there for
the full 50ms timeout. So this patch adds an argument that will allow
us to avoid the vblank wait in case we want. Currently all the callers
still request for the vblank wait, so the behavior should still be the
same.
We also added a POSTING_READ on the register: previously
intel_wait_for_vblank was acting as a POSTING_READ, but now if
wait_for_vblank is false we'll stkip it, so we need an explicit
POSTING_READ.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Instead of modifying intel_panel in lvds_init_connector/dsi_init/
edp_init_connector, making changes to move intel_panel->downclock_mode
initialization to intel_panel_init()
v2: Jani's review comments incorporated
Removed downclock_mode local variable in dsi_init and
edp_init_connector
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Can be expanded up on to include all sorts of things (HDMI infoframe
data, more DP status, etc). Should be useful for bug reports to get a
baseline on the display config and info.
v2: use seq_putc (Rodrigo)
describe mode field names (Rodrigo)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just like we have for connector type etc.
v2: drop static array (Chris)
v3: add kdoc (Daniel)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
For use by get_plane_config.
v2: cleanup tile_height bits (Chris)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In Jesse's patch to switch the fbdev framebuffer from an embedded
struct to a pointer the kfree in case of an error was missed. Fix this
up by using our own internal fb allocation helper directly instead of
reinventing that wheel.
We need a to_intel_framebuffer cast unfortunately since all the other
callers of _create still look better whith using a drm_framebuffer as
return pointer.
v2: Add an unlocked __intel_framebuffer_create function since our
dev->struct_mutex locking is too much a mess. With ppgtt we even need
it to take a look at the global gtt offset of pinned objects, since
the vma list might chance from underneath us. At least with the
current global gtt lookup functions. Reported by Mika.
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that it's a normally kmalloce buffer we can use the usual cleanup
paths. The upside here is that if we get the refcounting wrong will be
able to catch it, since the drm core will complain about leftover
framebuffers and kref about underflows.
v2: Kill intel_framebuffer_fini - no longer needed now that we
refcount all fbs properly and only confusing.
v3: We actually still need to call unregister_private to remove the fb
from the idr and drop the idr reference - the final unref doesn't do
that. So much for remembering my own fb liftime rules. Reported by
Imre Deak.
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If we can't actually determine at run-time we have a fused-off display,
provide at least an option to disable it.
v2: Move the i915.disable_display test in a separate check
(Daniel Vetter)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
FUSE_STRAP has a bit to inform us that the display has been fused off.
Use it to setup the definitive number of pipes at run-time.
v2: actually tweak num_pipes, not num_planes
v3: also tests SFUSE_STRAP bit 7
v4: rebase on top of drm-nightly
use DRM_INFO() for the message telling display is fused off
try to read the FUSE_LOCK bit to determine if PCH display is disabled
v5: Don't read SFUSE_STRAP (register on the PCH) if num_pipes is already 0
from the initial device info struct (to prevent hangs) (Daniel Vetter)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> (for v3)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (for v3)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Arjan van de Ven reported that on his test machine that he was seeing
stalls of greater than 1 frame greatly impacting the user experience. He
tracked this down to being the locked flush during a pagefault as being
the culprit hogging the struct_mutex and so blocking any other user from
proceeding. Stalling on a pagefault is bad behaviour on userspace's
part, for one it means that they are ignoring the coherency rules on
pointer access through the GTT, but fortunately we can apply the same
trick as the set-to-domain ioctl to do a lightweight, nonblocking flush
of outstanding rendering first.
"Prior to the patch it looks like this
(this one testrun does not show the 20ms+ I've seen occasionally)
4.99 ms 2.36 ms 31360 __wait_seqno i915_wait_seqno i915_gem_object_wait_rendering i915_gem_object_set_to_gtt_domain i915_gem_fault __do_fault handle_
+pte_fault handle_mm_fault __do_page_fault do_page_fault page_fault
4.99 ms 2.75 ms 107751 __wait_seqno i915_gem_wait_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
4.99 ms 1.63 ms 1666 i915_mutex_lock_interruptible i915_gem_fault __do_fault handle_pte_fault handle_mm_fault __do_page_fault do_page_fault page_fa
+ult
4.93 ms 2.45 ms 980 i915_mutex_lock_interruptible intel_crtc_page_flip drm_mode_page_flip_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_
+sysret
4.89 ms 2.20 ms 3283 i915_mutex_lock_interruptible i915_gem_wait_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
4.34 ms 1.66 ms 1715 i915_mutex_lock_interruptible i915_gem_pwrite_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
3.73 ms 3.73 ms 49 i915_mutex_lock_interruptible i915_gem_set_domain_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
3.17 ms 0.33 ms 931 i915_mutex_lock_interruptible i915_gem_madvise_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
2.97 ms 0.43 ms 1029 i915_mutex_lock_interruptible i915_gem_busy_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
2.55 ms 0.51 ms 735 i915_gem_get_tiling drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
After the patch it looks like this:
4.99 ms 2.14 ms 22212 __wait_seqno i915_gem_wait_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
4.86 ms 0.99 ms 14170 __wait_seqno i915_gem_object_wait_rendering__nonblocking i915_gem_fault __do_fault handle_pte_fault handle_mm_fault __do_page_
+fault do_page_fault page_fault
3.59 ms 1.31 ms 325 i915_gem_get_tiling drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
3.37 ms 3.37 ms 65 i915_mutex_lock_interruptible i915_gem_wait_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
2.58 ms 2.58 ms 65 i915_mutex_lock_interruptible i915_gem_do_execbuffer.isra.23 i915_gem_execbuffer2 drm_ioctl i915_compat_ioctl compat_sys_ioctl
+ia32_sysret
2.19 ms 2.19 ms 65 i915_mutex_lock_interruptible intel_crtc_page_flip drm_mode_page_flip_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_
+sysret
2.18 ms 2.18 ms 65 i915_mutex_lock_interruptible i915_gem_busy_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
1.66 ms 1.66 ms 65 i915_gem_set_tiling drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
It may not look like it, but this is quite a large difference, and I've
been unable to reproduce > 5 msec delays at all, while before they do
happen (just not in the trace above)."
gem_gtt_hog on an old Pineview (GMA3150),
before: 4969.119ms
after: 4122.749ms
Reported-by: Arjan van de Ven <arjan.van.de.ven@intel.com>
Testcase: igt/gem_gtt_hog
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Atm we call the handlers for pending pipestat interrupt events even if
they aren't explicitly enabled by i915_enable_pipestat(). This isn't an
issue for events other than the vblank start event, since those are
always enabled anyways. Otoh, we enable the vblank start event
on-demand, so we'll end up calling the vblank handler at times when they
are disabled.
I haven't checked if this causes any real problem, but for consistency
and to remove some overhead we should still fix this by clearing /
handling only the enabled interrupt events. Also this is a dependency
for the upcoming VLV power domain patchset where we need to disable all
the pipestat interrupts whenever the display power well is off.
v2:
- inline the status->enable mask mapping (Ville)
- don't check for invalid PSR bit on platforms other than VLV (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Frob conflict due to different merge order.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
At least on VLV we can't get at the pipestat status bits by simply right
shifting the corresponding enable bits. The mapping between enable and
status bits for the sprite0,1 flip done and the PSR events don't follow
this rule, so we need to map them separately.
The PSR enable for pipe A is DPFLIPSTAT[22], but I haven't added support
for this, since there is no user of it atm. Until support is added WARN
if someone tries to enable PSR interrupts, or tries to enable the same
(1 << 6) bit on pipe B, which MBZ.
v2:
- inline the status->enable mask mapping (Ville)
- fix bogus use of status bits in enable mask (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There isn't any PSR interrupt enable bit for pipe A, so we couldn't
enable it through the current API. Passing the corresponding status bits
solves this and also makes the mapping between enable and status bits
simpler on VLV (addressed in an upcoming patch).
Except of checking for invalid status bit arguments, no functional
change.
v2: split out the low level parts of i915_enable_pipestat accepting
separate enabled and status masks, to make the non-standard mapping
between those masks stand out more (added in the next patch)
(Jesse,Daniel)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Touching the VGA registers risks a hard machine hang, at least on this
ivb machine after removing a conflicting efifb. This is more than likely
related to the discovery that VGA IO decode on the more recent PCH
platforms is terminally broken.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This has very little effect other than log the errors in case of failure,
and we then hope for the best.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Allocate this struct instead, so we can re-use another allocated
elsewhere if needed.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: WARN_ON if there's no backing storage attached to an fb,
that's a bug.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When we detect that the user passed along an invalid handle or object,
we emit a warning as an aide for debugging. Since these are indeed only
for debugging user triggerable errors (and the errors are reported back
to userspace by the errno), the messages should only be at the debug
level and not claiming that there is a catastrophic error in the
driver/hardware.
References: https://bugs.freedesktop.org/show_bug.cgi?id=74704
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We had 2 set of defines for the same register, so make it one.
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
And rename it to num_sprites as this value doesn't count the primary
plane.
This limit lives with num_pipes really, and now that dev_priv->info is
writable we can put it there instead.
While at it, introduce a intel_device_info_runtime_init() where we'll be
able to gather the device info fields at run-time.
v2: rename num_plane to num_sprites (Ville Syrjälä)
v3: rebase on top of latest drm-nightly
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> (for v2)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (for v2)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Turns out it'd be nice to change some device information at run-time or simply
have some code to fill in the info struct instead of having to declare the
values in 30+ structures.
What prompted this change is handling fused out display/pipe and tweaking
num_pipes at run-time, but I'm quite sure we'll find other flags/limits to
stick into dev_priv->info.
Most of the changes were done with a sed:
sed -i -e 's/dev_priv->info->/dev_priv->info./g' drivers/gpu/drm/i915/*[ch]
with a few tweaks to make it all work:
- Change the field definition in struct drm_i915_private
- adjust i915_dump_device_info()
- adjust i915_driver_load()
- adjust the INTEL_INFO() macro
v2: cast the info pointer returned by INTEL_INFO() to be const to catch
uses that would modify the structure post-initialization.
(Ville Syrjälä)
v3: Redo the patch onto latest drm-nightly,
Keep the info field const to catch post initialization writes
instead of the v2 solution,
Use a direct structure copy for the initial info initialization to
use the compiler type safety (Ville Syrjälä)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> (for v2)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (for v2)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If we make sure that all the dev_priv->info usages are wrapped by
INTEL_INFO(), we can easily modify the ->info field to be structure and
not a pointer while keeping the const protection in the INTEL_INFO()
macro.
v2: Rebased onto latest drm-nightly
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
According to Bspec we need to disable SF pipelined attribute fetch
whenever SF outputs exceed 16 and normal clip mode is used. A quick
glance at Mesa suggests that these conditions could happen. So let's
just always set the magic bit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There is a missing unlock on error here.
Fixes: 30f82d816d ('drm/vmwgfx: Reemit context bindings when necessary v2')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
This patch queries the register SVGA_REG_MOB_MAX_SIZE for the
maximum size of a single mob.
Signed-off-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Introduced with 3.14-rc1
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Add guard to check whether RGB output is already enabled in the way it's
done for HDMI output. Fixes possible hang on trying to disable output twice
(first time during driver probe and second on fb registering).
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When patching gathers, we don't need to check against
gathers with lower indices than the current one, as
they are guaranteed to already have been handled.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-By: Terje Bergstrom <tbergstrom@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
These are a number of fixes from the patch set which Jean-Francois has
been working on which I think are important to be merged during -rc, and
have been tested independently here. I've been in discussion with Rob,
who is happy that I send these directly to you.
* 'tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox:
drm/i2c: tda998x: fix the ENABLE_SPACE register
drm/i2c: tda998x: set the PLL division factor in range 0..3
drm/i2c: tda998x: force the page register at startup time
drm/i2c: tda998x: free the CEC device on encoder_destroy
drm/i2c: tda998x: check the CEC device creation
drm/i2c: tda998x: fix bad value in the AIF
3 regression fixes in i915
* tag 'drm-intel-fixes-2014-02-11' of ssh://git.freedesktop.org/git/drm-intel:
drm/i915: Pair va_copy with va_end in i915_error_vprintf
drm/i915: Fix intel_pipe_to_cpu_transcoder for UMS
drm/i915: Disable dp aux irq on g4x
According to BSpec the entire MI_DISPLAY_FLIP packet must be contained
in a single cacheline. Make sure that happens.
v2: Use intel_ring_begin_cacheline_safe()
v3: Use intel_ring_cacheline_align() (Chris)
Cc: Bjoern C <lkml@call-home.ch>
Cc: Alexandru DAMIAN <alexandru.damian@intel.com>
Cc: Enrico Tagliavini <enrico.tagliavini@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74053
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
intel_ring_cachline_align() emits MI_NOOPs until the ring tail is
aligned to a cacheline boundary.
Cc: Bjoern C <lkml@call-home.ch>
Cc: Alexandru DAMIAN <alexandru.damian@intel.com>
Cc: Enrico Tagliavini <enrico.tagliavini@gmail.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org (prereq for the next patch)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Each invocation of va_copy() must be matched by a corresponding
invocation of va_end() in the same function.
This regression has been introduced in
commit e29bb4ebbf
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Sep 20 10:20:59 2013 +0100
drm/i915: Use a temporary va_list for two-pass string handling
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We don't have all the drm_crtc&co hanging around in that case.
This regression has been introduced in
commit 391f75e2bf
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Sep 25 19:55:26 2013 +0300
drm/i915: Fix pre-CTG vblank counter
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=69521
Cc: stable@vger.kernel.org (for 3.13 only)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just minor stuff really, on vlv dp fix and two patches to tune down some
opregion sanity check. Plus MAINTAINERS update for the new git repo, which
is the only reason I've really bothered with this pull request.
* tag 'drm-intel-fixes-2014-02-06' of ssh://git.freedesktop.org/git/drm-intel:
drm/i915: demote opregion excessive timeout WARN_ONCE to DRM_INFO_ONCE
drm: add DRM_INFO_ONCE() to print a one-time DRM_INFO() message
MAINTAINERS: Update drm/i915 git repo
drm/i915: vlv: fix DP PHY lockup due to invalid PP sequencer setup
This pull request fixes memory leak issue in exynos_drm_open() and
multiplatform breakage for ipp/gsc. And also including some cleanups.
* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: Convert to use the standard hdmi.h header
drm/exynos: Fix trivial typo
drm/exynos: Remove unnecessary semicolon
drm/exynos: Fix multiplatform breakage for ipp/gsc
drm/exynos: Fix freeing issues in exynos_drm_drv.c
Compared to original fixes pull req that I sent yesterday, this adds
one more fix that I found for a synchronization issue which starts to
crop up when we use XA in DDX for 2d accel on 3d core. In particular,
accelerating presentation blit triggers this problem.
* 'msm-next' of git://people.freedesktop.org/~robclark/linux:
drm/msm: bigger synchronization hammer
drm/msm: fix deadlock in bo create fail path
drm/msm/mdp4: cursor fixes
drm/msm/mdp4: pageflip fixes
drm/msm/mdp5: fix ref leaks in error paths
drm/msm: fix inconsequential typo
Apparently it's broken in the exact same way as the gmbus irq. For
reference of the full story see
commit c12aba5aa0
Author: Jiri Kosina <jkosina@suse.cz>
Date: Tue Mar 19 09:56:57 2013 +0100
drm/i915: stop using GMBUS IRQs on Gen4 chips
The effect is that we have a storm of unclaimed interrupts on the
legacy irq line. If that one is used by a different device then the
kernel will complain and rather quickly kill the irq source. Which
breaks any device trying to actually use the legacy irq line.
This regression has been introduced
commit 4aeebd7443
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Oct 31 09:53:36 2013 +0100
drm/i915: dp aux irq support for g4x/vlv
Note that disabling MSI works around the issue, but we can't do that
since apparently then the hw will miss interrupts. At least if
relevant comments in i915_irq.c are accurate.
v2: Cross-reference dp aux and gmbus gen4 comments.
v3: Consolidate harder into i915_drv.h as suggested by Chris.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-and-tested-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Because we use a list_head in the bo to track it's position in a submit,
we need to serialize at a higher layer. Otherwise there are problems
when multiple contexts are SUBMIT'ing in parallel cmdstreams referencing
a shared bo.
Signed-off-by: Rob Clark <robdclark@gmail.com>
sysfs changes to rps min and max delay were only triggering an update
of the rps interrupt limits if the active delay required an update.
This change ensures that interrupt limits are always updated.
v2: correct compile issue missed on rebase
v3: add igt testcases to signed-off-by section
Testcase: igt/pm_rps/min-max-config-idle
Testcase: igt/pm_rps/min-max-config-loaded
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A check of rps/rc6 state after i915_reset determined that the ring
MAX_IDLE registers were returned to their hardware defaults and that
the GEN6_PMIMR register was set to mask all interrupts. This change
restores those values to their pre-reset states by re-initializing
rps/rc6 in i915_reset. A full re-initialization was opted for versus
a targeted set of restore operations for simplicity and maintain-
ability. Note that the re-initialization is not done for Ironlake,
due to a past comment that it causes problems.
Also updated the rps initialization sequence to preserve existing
min/max values in the case of a re-init. We assume the values were
validated upon being set and do not do further range checking. The
debugfs interface for changing min/max was updated with range
checking to ensure this condition (already present in sysfs
interface).
v2: fix rps logging to output hw_max and hw_min, not rps.max_delay
and rps.min_delay which don't strictly represent hardware limits.
Add igt testcase to signed-off-by section.
Testcase: igt/pm_rps/reset
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Remove local definitions and use the ones provided by hdmi.h.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
There is no need to include "plat/map-base.h" in ipp driver. Remove
this and enable this driver for multi-platform.
However gsc driver is not multiplatform compliant yet, so make the
compilation conditional upon !ARCH_MULTIPLATFORM.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
If we take the false branch of the if quoted in the diff below, we
end up doing a return ret, without ever having initialized it.
Picked up by coverity.
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we parse the power tables use the stored mac_vddc value
rather than lookig it up manually each time.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For btc and newer, we may modify the power state depending
on the circumstances. Use the modified state rather than
the base state.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the VM do not track activity of objects and instead use a large
hammer to forcibly idle and evict all of their associated objects when
one is released, it is possible for that to cause a recursion when we
need to wait for free space on a ring and call retire requests.
(intel_ring_begin -> intel_ring_wait_request ->
i915_gem_retire_requests_ring -> i915_gem_context_free ->
i915_gem_evict_vm -> i915_gpu_idle -> intel_ring_begin etc)
In order to remove the requirement for calling retire-requests from
intel_ring_wait_request, we have to inline a couple of steps from
retiring requests, notably we have to record the position of the request
we wait for and use that to update the available ring space.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
the evergreen CS parser has allowed this for a while, just port
the code to the r600 one.
This is required before geom shaders can be made work.
v2: agd5f: minor cleanup and add additional 7xx reg.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
A couple of vmwgfx fixes together with missing bits of legacy device
emulation to facilitate old user-space drivers on new devices.
The shader emulation bits are a bit large, but since they mostly touch the
new device code, regressions are unlikely. I figure the gain of having
this from the start clearly outweighs the risc of adding these bits at
this point.
Pull request of 2014-02-05
* tag 'vmwgfx-fixes-3.14-2014-02-05' of git://people.freedesktop.org/~thomash/linux:
vmwgfx: Fix unitialized stack read in vmw_setup_otable_base
drm/vmwgfx: Reemit context bindings when necessary v2
drm/vmwgfx: Detect old user-space drivers and set up legacy emulation v2
drm/vmwgfx: Emulate legacy shaders on guest-backed devices v2
drm/vmwgfx: Fix legacy surface reference size copyback
drm/vmwgfx: Fix SET_SHADER_CONST emulation on guest-backed devices
drm/vmwgfx: Fix regression caused by "drm/ttm: make ttm reservation calls behave like reservation calls"
drm/vmwgfx: Don't commit staged bindings if execbuf fails
Two ttm regression fixes.
Pull request of 2014-02-05
* tag 'ttm-fixes-3.14-2014-02-05' of git://people.freedesktop.org/~thomash/linux:
drm/ttm: Don't clear page metadata of imported sg pages
drm/ttm: Fix TTM object open regression
I totally sign inverted my way out of this one.
Cc: stable@vger.kernel.org
Reported-by: "Sabrina Dubroca" <sd@queasysnail.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
It seems we need to update all cursor registers from vblank. This
appears to be the cause of intermittent underflows when enabling/
disabling cursor.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Backport a few fixes found in the course of getting mdp5 working.
There is a window of time after pageflip is requested, before we
start scanning out the new fb (ie. while we are waiting for gpu).
During that time we need to continue holding a reference to the
still-current scanout fb, to avoid the backing gem bo's from being
destroyed.
Possibly a common mdp_crtc parent class could be useful to share
some of this logic between mdp4_crtc and mdp5_crtc. OTOH, this
all can be removed from the driver once atomic is in place, as
plane/crtc updates get deferred until all fb's are ready before
calling in to .page_flip(), etc.
Signed-off-by: Rob Clark <robdclark@gmail.com>
We get a large number of bugs which have a, "hey I have that too"
because they see a GPU hang in dmesg. While two machines of the same
model having a GPU hang is indeed a coincidence, it is far from enough
evidence to suggest they are the same.
In order to reduce this effect, and hopefully get people to file new bug
reports, clearly the error message itself has been insufficient (see ref
at the bottom for a new bug report with this characteristic).
The algorithm is purposely pretty naive. I don't think we need much in
order to avoid the problem I am trying to solve, and keeping it naive
gives us some ability to make a decent test case.
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
References: https://bugs.freedesktop.org/show_bug.cgi?id=73276
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Small typo I noticed in the mdp4_plane code.. no consequence because
PIPE_SRC_XY and PIPE_DST_XY have same register layout.
Signed-off-by: Rob Clark <robdclark@gmail.com>
s/FLIPDONE/FLIP_DONE/ to make all FLIP_DONE macro names consistent.
No functional change.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This will be used by other platforms too, so factor it out.
The only functional change is the reordeing of gmbus_irq_handler() wrt.
the hotplug handling, but since it only schedules a work, it isn't an
issue.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Don't keep on using the private_t typedef.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bspec and the code suggests that the interrupt signaled by IIR[7,5]
(DISPLAY_PIPE_A/B_VBLANK) is a first level IRQ flag for the second
level PIPEA/BSTAT[2] (Start of Vertical Blank) interrupt. Measuring
the relative timings of when IIR[7] and PIPEASTAT[1,2] get set and
checking the effect of unmasking different pipestat and IIR events
shows that this isn't so:
First, ISR/IIR[7] gets set independently of PIPEASTAT[18] (Start of
Vertical Blank Enable) or any other pipestat enable bit, so it isn't
a first level IRQ bit showing the state of PIPEASTAT[2], but is
connected directly to the timing generator.
Second, setting only PIPEASTAT[18] and leaving all other pipestat events
disabled, IIR[6] (DISPLAY_PIPE_A_EVENT) gets set close to the moment when
PIPEASTAT[2] gets set, so the former is a first level interrupt flag for
the latter. The bspec is rather unclear about this, but I also assume
that IIR[6] signals all pipestat A events, except PIPEASTAT[31] (FIFO
Under-run Status).
Third, IIR[7] is set close to the moment when PIPEASTAT[1] (Framestart
Interrupt) gets set, in the mode I used about 12usec after PIPEASTAT[2]
and IIR[6] gets set. This means the IIR[7] isn't marking the start of
vblank, but rather signals the framestart event.
Based on the above, we don't need to unmask IIR[7] when waiting for
start of vblank events, but we can rely on IIR[6] being always unmasked,
which will signal when PIPEASTAT[2] gets set. Doing this will also get
rid of the overhead of getting an interrupt and servicing IIR[7], which
is atm raised always some time after IIR[6]/PIPEASTAT[2] is raised.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
These page pointers shouldn't be visible to TTM in the first place, but
until we fix that up, don't clear the page metadata because that
will upset the exporter.
Reported-and-tested-by: Cristoph Haag <haagch.christoph@googleemail.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Commit drm/ttm: ttm object security fixes for render nodes introduced a
regression where, if a TTM object was opened multiple times from the same
open file, the caller would spin uninterruptibly in the kernel.
Fix this.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
One of the error paths in vmw_setup_otable_base causes us to return with
'ret' having never been set to anything causing us to return whatever was
on the stack.
Found with Coverity
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
When a context is first referenced in the command stream, make sure that all
scrubbed (as a result of eviction) bindings are re-emitted. Also make sure that
all bound resources are put on the resource validate list.
This is needed for legacy emulation, since legacy user-space drivers will
typically not re-emit shader bindings. It also removes the requirement for
user-space drivers to re-emit render-target- and texture bindings.
Makes suspend and hibernate now also work with legacy user-space drivers on
guest-backed devices.
v2: Don't rebind on legacy devices.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
GB aware mesa userspace drivers are detected by the fact that they are
calling the vmw getparam ioctl querying DRM_VMW_PARAM_HW_CAPS to detect
whether the device is Guest-backed object capable. For other drivers,
lie about hardware version and send the 3D capabilities in a format they
expect.
v2:
Use DRM_VMW_PARAM_MAX_MOB_MEMORY to detect gb awareness,
Make sure we don't ovwerwrite bounce buffer or write past user-space buffer
indicated size.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Command stream legacy shader creation and destruction is replaced by
NOPs in the command stream, and instead guest-backed shaders are created
and destroyed as part of the command validation process.
v2: Removed some stray debug messages.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Surfaces created using the guest-backed surface interface only keeps the
base mip size, so only copy that if the legacy surface reference
ioctl requests the size information.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Emulate the SET_SHADER_CONST legacy command on guest-backed devices by
issuing a SET_GB_SHADERCONSTS_INLINE command.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
The call to ttm_eu_backoff_reservation() as part of an error path would cause
a lock imbalance if the reservation ticket was not initialized. This error is
easily triggered from user-space by submitting a bogus command stream.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
If execbuf fails and binding commands are never sent to the device,
don't commit the staged context bindings to the tracker.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The WARN_ONCE is a bit too verbose, make it a DRM_INFO_ONCE.
While at it, add a #define for MAX_DSLP and make the message a bit more
informative.
v2: use DRM_INFO_ONCE, add MAX_DSLP, pimp the message.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since a purged buffer is one without any associated pages, attempting to
use it should generate EFAULT rather than EINVAL, as it is not strictly
an invalid parameter.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
EFAULT will be a possible return code where backing storage is
transient, such after it is purged by madvise. As such it is to be
expected and so should not trigger a WARN inside i915_gem_fault() but be
converted silently to SIGBUS.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When we enter RC6 and GFX Clocks are off, the voltage remains higher
than Vmin. When we try to set the freq to RPn, it might fail since the
Gfx clocks are down. So to fix this in Gfx idle, Bring the GFX clock up
and set the freq to RPn then move GFx down.
v2: remove vlv_update_rps_cur_delay function. Update commit message (Daniel)
v3: Fix the timeout during wait for gfx clock (Jesse)
v4: addressed comments on set freq and punit wait (Ville)
v5: use wait_for while waiting for GFX clk to be up. (Daniel)
update cur_delay before requesting min_delay. (Ville)
v6: use wait_for while waiting for punit. (Ville)
Signed-off-by: Deepak S <deepak.s@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As we seek the guilty batch using request and hangcheck
score, this code is not needed anymore.
v2: Rebase. Passing dev_priv instead of getting it from last_ring
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With full ppgtt using acthd is not enough to find guilty
batch buffer. We get multiple false positives as acthd is
per vm.
Instead of scanning which vm was running on a ring,
to find corressponding context, use a different, simpler,
strategy of finding batches that caused gpu hang:
If hangcheck has declared ring to be hung, find first non complete
request on that ring and claim it was guilty.
v2: Rebase
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73652
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Both Bspec and the W/A database state that WaDisablePSDDualDispatchEnable
is only needed for IVB GT1.
The only real confusion here is that the the W/A database also says to
write to the GT2 only register as well, which is strange if the W/A is
only for GT1.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
IVB GT2 has two registers for these things, and both must be written.
To add a bit more confusion both Bspec and the W/A database state that
WaDisablePSDDualDispatchEnable is only needed for IVB GT1, but the W/A
database also says to write even the second GT2 only register. So I
don't really know what the right thing here is.
Note that Bspec disagrees with the w/a database here, but Ville
confirmed (by asking Chris) that on gt1 the 2nd reg doesn't exist.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
[danvet: Add note as requested by Rodrigo.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch fixes the ENABLE_SPACE register, the value of which was
inverted.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The predivider division factor of the register PLL_SERIAL_2 is in the
range 0..3, the value 0 being used for a division by 1.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch forces the page register to be set on the first I/O operation.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The cec i2c device is created in tda998x_encoder_init() when the DRM
driver starts.
This patch frees it when the DRM driver is unloaded.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch checks if the CEC device is well created at intialization
time.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The AIF has an uninitialized byte. This patch clears the whole buffer
before filling it.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Atm we setup the HW panel power sequencer logic both for eDP and DP
ports. On eDP we then go on and start the power on sequence and commence
with link training when it's ready. On DP we don't do the power on
sequencing but do the link training immediately. At this point the DP
PHY block gets stuck, since - supposedly - it is waiting for the power
on sequence to finish. The actual register write that seems to hold off
the PHY is PIPEX_PP_ON_DELAYS[Panel Control Port Select]. Writing here
a non-0 value eventually sets PIPEX_PP_STATUS[Require Asset Status] to
1 and blocks the PHY until the panel power on is ready.
Fix this by not doing any PP sequencing setup for DP ports.
Thanks to Ville Syrjälä, Jesse Barnes and Todd Previte for the help in
tracking this down.
Note that on older gmch platforms (where we have lvds instead of edp)
we've hacked around this by writing the magic ABCD unlock key to PP
registers, which disables the hw sanity checks.
For edp all platforms thus far had the pch split, with the edp port in
the north display complex and the PP registers on the pch the hw
sanity checks (expressed through the "Require Asset Status" bit) was
never functional, hence never a real issue.
This regression has been introduce in
commit bf13e81b90
Author: Jani Nikula <jani.nikula@intel.com>
Date: Fri Sep 6 07:40:05 2013 +0300
drm/i915: add support for per-pipe power sequencing on vlv
Signed-off-by: Imre Deak <imre.deak@intel.com>
[danvet: Add note about the bigger story here.]
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We want to use the GTT for reading back objects upon an error so that we
have exactly the information that the GPU saw. However, it is verboten
to access snoopable pages through the GTT and causes my PineView GPU to
throw a page fault instead.
This has not been a problem in the past as we only dumped ringbuffers
and batchbuffers, both of which must be not snooped. However, the
introduction of HWS page dumping leads to a read of a snooped object
through the GTT. This was introduced by
commit f3ce382139
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Jan 23 22:40:36 2014 +0000
drm/i915: Include HW status page in error capture
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet:s/uncached/not snooped/ for one case in the commit message as
requested by Chris.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Repeating the same information multiple times is just annoying.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If we have stopped rings then we know that test is running
so no need for spam. In addition, only spam when default
context gets banned.
v2: - make sure default context ban gets shown (Chris)
- use helper for checking for default context, everywhere (Chris)
v3: - dont be quiet when debug is set (Ben, Daniel)
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=73652
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With full ppgtt support drm_i915_file_private gained knowledge
about the default context. Also reset stats are now inside
i915_hw_context so we can use proper abstraction.
v2: Move BUG_ON and WARN_ON to more proper locations (Ben)
v3: Pass dev directly to i915_context_is_banned to avoid the need to
dereference ctx->last_ring. Spotted by Mika when checking my
s/BUG/WARN/ change, I've missed this ->last_ring dereference.
Suggested-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> (v2)
Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (v2)
[danvet: s/BUG/WARN/]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The optimization helps IVB too. No piglit regression.
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The optimization is available on Ivy Bridge and later, and is disabled by
default. Enabling it helps certain workloads such as GLBenchmark TRex test.
No piglit regression.
v2
- no need to save the register before suspend as init_clock_gating can
correctly program it after resume
- split IVB change to another commit
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
v2: Rebased upon cleaned up error state
v3: Make sure hangcheck info remains last (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris:
Do we also want to capture?
GAC_ECO_BITS /* gen6,7 */
GAM_ECOCHK /* gen6,7 */
GAB_CTL /* gen6 */
GFX_MODE /* gen6 */
Requested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
v2: Moved num_requests up (Chris)
Rebased on new hws page capture which required a rename since it made
two members named, 'hws' in the per ring error state. (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This helps make an upcoming patch a bit more reviewable
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Create logical sections in an attempt to clean up, and continue to keep
future additions clean.
v2: Reworded the comments. Added section headers (Chris)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The code has become quite hairy. By relocating all the generic registers
it will become more obvious where future ones should go. There is still
admittedly a bit of confusion left for things like per ring registers.
A subsequent patch will clean this function up.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Backmerge drm-next - I need to backmerge drm-intel-fixes patches
touching the error capture code to be able to merge Ben's cleanup
patches.
Conflicts:
drivers/gpu/drm/i915/i915_gpu_error.c
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
