ext4_{set,clear}_bit() is defined as __test_and_{set,clear}_bit_le() for
ext4. Only two ext4_{set,clear}_bit() calls check the return value. The
rest of calls ignore the return value and they can be replaced with
__{set,clear}_bit_le().
This changes ext4_{set,clear}_bit() from __test_and_{set,clear}_bit_le()
to __{set,clear}_bit_le() and introduces ext4_test_and_{set,clear}_bit()
for the two places where old bit needs to be returned.
This ext4_{set,clear}_bit() change is considered safe, because if someone
uses these macros without noticing the change, new ext4_{set,clear}_bit
don't have return value and causes compiler errors where the return value
is used.
This also removes unused ext4_find_first_zero_bit().
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When insert_inode_locked() fails in ext4_new_inode() it most likely means inode
bitmap got corrupted and we allocated again inode which is already in use. Also
doing unlock_new_inode() during error recovery is wrong since the inode does
not have I_NEW set. Fix the problem by jumping to fail: (instead of fail_drop:)
which declares filesystem error and does not call unlock_new_inode().
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Replace direct i_nlink updates with the respective updater function
(inc_nlink, drop_nlink, clear_nlink, inode_dec_link_count).
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Remove comments about 'extent' mount option in ext4_new_inode(), since
it's no longer exists.
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The tmp_inode should have same uid/gid as the original inode.
Otherwise new metadata blocks will be accounted to wrong quota-id,
which will result in a quota leak after the inode migration is
completed.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function declarations in ext4.h are already marked extern, so it's
not necessary to do so in the .c files.
This quiets the sparse noise:
warning: function 'ext4_flush_completed_IO' with external linkage has definition
warning: function 'ext4_init_inode_table' with external linkage has definition
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For a long time now orlov is the default block allocator in the
ext4. It performs better than the old one and no one seems to claim
otherwise so we can safely drop it and make oldalloc and orlov mount
option deprecated.
This is a part of the effort to reduce number of ext4 options hence the
test matrix.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This function really returns the number of clusters after initializing
an uninitalized block bitmap has been initialized.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The field bg_free_blocks_count_{lo,high} in the block group
descriptor has been repurposed to hold the number of free clusters for
bigalloc functions. So rename the functions so it makes it easier to
read and audit the block allocation and block freeing code.
Note: at this point in bigalloc development we doesn't support
online resize, so this also makes it really obvious all of the places
we need to fix up to add support for online resize.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Convert the free_blocks to be free_clusters to make the final revised
bigalloc changes easier to read/understand.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Convert the percpu counters s_dirtyblocks_counter and
s_freeblocks_counter in struct ext4_super_info to be
s_dirtyclusters_counter and s_freeclusters_counter.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function ext4_free_blocks_after_init() used to be a #define of
ext4_init_block_bitmap(). This actually made it difficult to
understand how the function worked, and made it hard make changes to
support clusters. So as an initial cleanup, I've separated out the
functionality of initializing block bitmap from calculating the number
of free blocks in the new block group.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch lets ext4_init_inode_table() handle errors right.
ext4_init_inode_table() should down_write() alloc_sem which
has been up_write()ed and stop the started journal handle.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (43 commits)
ext4: fix a BUG in mb_mark_used during trim.
ext4: unused variables cleanup in fs/ext4/extents.c
ext4: remove redundant set_buffer_mapped() in ext4_da_get_block_prep()
ext4: add more tracepoints and use dev_t in the trace buffer
ext4: don't kfree uninitialized s_group_info members
ext4: add missing space in printk's in __ext4_grp_locked_error()
ext4: add FITRIM to compat_ioctl.
ext4: handle errors in ext4_clear_blocks()
ext4: unify the ext4_handle_release_buffer() api
ext4: handle errors in ext4_rename
jbd2: add COW fields to struct jbd2_journal_handle
jbd2: add the b_cow_tid field to journal_head struct
ext4: Initialize fsync transaction ids in ext4_new_inode()
ext4: Use single thread to perform DIO unwritten convertion
ext4: optimize ext4_bio_write_page() when no extent conversion is needed
ext4: skip orphan cleanup if fs has unknown ROCOMPAT features
ext4: use the nblocks arg to ext4_truncate_restart_trans()
ext4: fix missing iput of root inode for some mount error paths
ext4: make FIEMAP and delayed allocation play well together
ext4: suppress verbose debugging information if malloc-debug is off
...
Fi up conflicts in fs/ext4/super.c due to workqueue changes
- Add more ext4 tracepoints.
- Change ext4 tracepoints to use dev_t field with MAJOR/MINOR macros
so that we can save 4 bytes in the ring buffer on some platforms.
- Add sync_mode to ext4_da_writepages, ext4_da_write_pages, and
ext4_da_writepages_result tracepoints. Also remove for_reclaim
field from ext4_da_writepages since it is usually not very useful.
Signed-off-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When allocating a new inode, we need to make sure i_sync_tid and
i_datasync_tid are initialized. Otherwise, one or both of these two
values could be left initialized to zero, which could potentially
result in BUG_ON in jbd2_journal_commit_transaction.
(This could happen by having journal->commit_request getting set to
zero, which could wake up the kjournald process even though there is
no running transaction, which then causes a BUG_ON via the
J_ASSERT(j_ruinning_transaction != NULL) statement.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch fixes the warning "Using plain integer as NULL pointer",
generated by sparse, by replacing the offending 0s with NULL.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
SELinux would like to implement a new labeling behavior of newly created
inodes. We currently label new inodes based on the parent and the creating
process. This new behavior would also take into account the name of the
new object when deciding the new label. This is not the (supposed) full path,
just the last component of the path.
This is very useful because creating /etc/shadow is different than creating
/etc/passwd but the kernel hooks are unable to differentiate these
operations. We currently require that userspace realize it is doing some
difficult operation like that and than userspace jumps through SELinux hoops
to get things set up correctly. This patch does not implement new
behavior, that is obviously contained in a seperate SELinux patch, but it
does pass the needed name down to the correct LSM hook. If no such name
exists it is fine to pass NULL.
Signed-off-by: Eric Paris <eparis@redhat.com>
We can store the dynamic inode state flags in the high bits of
EXT4_I(inode)->i_flags, and eliminate i_state_flags. This saves 8
bytes from the size of ext4_inode_info structure, which when
multiplied by the number of the number of in the inode cache, can save
a lot of memory.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
These functions have no need to be exported beyond file context.
No functions needed to be moved for this commit; just some function
declarations changed to be static and removed from header files.
(A similar patch was submitted by Eric Sandeen, but I wanted to handle
code movement in separate patches to make sure code changes didn't
accidentally get dropped.)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
User-space should have the opportunity to check what features doest ext4
support in each particular copy. This adds easy interface by creating new
"features" directory in sys/fs/ext4/. In that directory files
advertising feature names can be created.
Add lazy_itable_init to the feature list.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When the lazy_itable_init extended option is passed to mke2fs, it
considerably speeds up filesystem creation because inode tables are
not zeroed out. The fact that parts of the inode table are
uninitialized is not a problem so long as the block group descriptors,
which contain information regarding how much of the inode table has
been initialized, has not been corrupted However, if the block group
checksums are not valid, e2fsck must scan the entire inode table, and
the the old, uninitialized data could potentially cause e2fsck to
report false problems.
Hence, it is important for the inode tables to be initialized as soon
as possble. This commit adds this feature so that mke2fs can safely
use the lazy inode table initialization feature to speed up formatting
file systems.
This is done via a new new kernel thread called ext4lazyinit, which is
created on demand and destroyed, when it is no longer needed. There
is only one thread for all ext4 filesystems in the system. When the
first filesystem with inititable mount option is mounted, ext4lazyinit
thread is created, then the filesystem can register its request in the
request list.
This thread then walks through the list of requests picking up
scheduled requests and invoking ext4_init_inode_table(). Next schedule
time for the request is computed by multiplying the time it took to
zero out last inode table with wait multiplier, which can be set with
the (init_itable=n) mount option (default is 10). We are doing
this so we do not take the whole I/O bandwidth. When the thread is no
longer necessary (request list is empty) it frees the appropriate
structures and exits (and can be created later later by another
filesystem).
We do not disturb regular inode allocations in any way, it just do not
care whether the inode table is, or is not zeroed. But when zeroing, we
have to skip used inodes, obviously. Also we should prevent new inode
allocations from the group, while zeroing is on the way. For that we
take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem
in the ext4_claim_inode, so when we are unlucky and allocator hits the
group which is currently being zeroed, it just has to wait.
This can be suppresed using the mount option no_init_itable.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
no need for list_for_each_entry_safe()/resetting with superblock list
Fix sget() race with failing mount
vfs: don't hold s_umount over close_bdev_exclusive() call
sysv: do not mark superblock dirty on remount
sysv: do not mark superblock dirty on mount
btrfs: remove junk sb_dirt change
BFS: clean up the superblock usage
AFFS: wait for sb synchronization when needed
AFFS: clean up dirty flag usage
cifs: truncate fallout
mbcache: fix shrinker function return value
mbcache: Remove unused features
add f_flags to struct statfs(64)
pass a struct path to vfs_statfs
update VFS documentation for method changes.
All filesystems that need invalidate_inode_buffers() are doing that explicitly
convert remaining ->clear_inode() to ->evict_inode()
Make ->drop_inode() just return whether inode needs to be dropped
fs/inode.c:clear_inode() is gone
fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
...
Fix up trivial conflicts in fs/nilfs2/super.c
We don't need to set s_dirt in most of the ext4 code when journaling
is enabled. In ext3/4 some of the summary statistics for # of free
inodes, blocks, and directories are calculated from the per-block
group statistics when the file system is mounted or unmounted. As a
result the superblock doesn't have to be updated, either via the
journal or by setting s_dirt. There are a few exceptions, most
notably when resizing the file system, where the superblock needs to
be modified --- and in that case it should be done as a journalled
operation if possible, and s_dirt set only in no-journal mode.
This patch will optimize out some unneeded disk writes when using ext4
with a journal.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits)
ext4: Make fsync sync new parent directories in no-journal mode
ext4: Drop whitespace at end of lines
ext4: Fix compat EXT4_IOC_ADD_GROUP
ext4: Conditionally define compat ioctl numbers
tracing: Convert more ext4 events to DEFINE_EVENT
ext4: Add new tracepoints to track mballoc's buddy bitmap loads
ext4: Add a missing trace hook
ext4: restart ext4_ext_remove_space() after transaction restart
ext4: Clear the EXT4_EOFBLOCKS_FL flag only when warranted
ext4: Avoid crashing on NULL ptr dereference on a filesystem error
ext4: Use bitops to read/modify i_flags in struct ext4_inode_info
ext4: Convert calls of ext4_error() to EXT4_ERROR_INODE()
ext4: Convert callers of ext4_get_blocks() to use ext4_map_blocks()
ext4: Add new abstraction ext4_map_blocks() underneath ext4_get_blocks()
ext4: Use our own write_cache_pages()
ext4: Show journal_checksum option
ext4: Fix for ext4_mb_collect_stats()
ext4: check for a good block group before loading buddy pages
ext4: Prevent creation of files larger than RLIMIT_FSIZE using fallocate
ext4: Remove extraneous newlines in ext4_msg() calls
...
Fixed up trivial conflict in fs/ext4/fsync.c
At several places we modify EXT4_I(inode)->i_flags without holding
i_mutex (ext4_do_update_inode, ...). These modifications are racy and
we can lose updates to i_flags. So convert handling of i_flags to use
bitops which are atomic.
https://bugzilla.kernel.org/show_bug.cgi?id=15792
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
- Reorganize locking scheme to batch two atomic operation in to one.
This also allow us to state what healthy group must obey following rule
ext4_free_inodes_count(sb, gdp) == ext4_count_free(inode_bitmap, NUM);
- Fix possible undefined pointer dereference.
- Even if group descriptor stats aren't accessible we have to update
inode bitmaps.
- Move non-group members update out of group_lock.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When used_dirs was introduced for the flex_groups struct, it looks
like the accounting was not put into place properly, in some places
manipulating free_inodes rather than used_dirs.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits)
quota: stop using QUOTA_OK / NO_QUOTA
dquot: cleanup dquot initialize routine
dquot: move dquot initialization responsibility into the filesystem
dquot: cleanup dquot drop routine
dquot: move dquot drop responsibility into the filesystem
dquot: cleanup dquot transfer routine
dquot: move dquot transfer responsibility into the filesystem
dquot: cleanup inode allocation / freeing routines
dquot: cleanup space allocation / freeing routines
ext3: add writepage sanity checks
ext3: Truncate allocated blocks if direct IO write fails to update i_size
quota: Properly invalidate caches even for filesystems with blocksize < pagesize
quota: generalize quota transfer interface
quota: sb_quota state flags cleanup
jbd: Delay discarding buffers in journal_unmap_buffer
ext3: quota_write cross block boundary behaviour
quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota
quota: split out compat_sys_quotactl support from quota.c
quota: split out netlink notification support from quota.c
quota: remove invalid optimization from quota_sync_all
...
Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c
Get rid of the initialize dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.
Rename the now static low-level dquot_initialize helper to __dquot_initialize
and vfs_dq_init to dquot_initialize to have a consistent namespace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Get rid of the drop dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.
Rename the now static low-level dquot_drop helper to __dquot_drop
and vfs_dq_drop to dquot_drop to have a consistent namespace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Get rid of the alloc_inode and free_inode dquot operations - they are
always called from the filesystem and if a filesystem really needs
their own (which none currently does) it can just call into it's
own routine directly.
Also get rid of the vfs_dq_alloc/vfs_dq_free wrappers and always
call the lowlevel dquot_alloc_inode / dqout_free_inode routines
directly, which now lose the number argument which is always 1.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Calls to ext4_handle_dirty_metadata should only pass in an inode
pointer for inode-specific metadata, and not for shared metadata
blocks such as inode table blocks, block group descriptors, the
superblock, etc.
The BUG_ON can get tripped when updating a special device (such as a
block device) that is opened (so that i_mapping is set in
fs/block_dev.c) and the file system is mounted in no journal mode.
Addresses-Google-Bug: #2404870
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Just a pet peeve of mine; we had a mishash of calls with either __func__
or "function_name" and the latter tends to get out of sync.
I think it's easier to just hide the __func__ in a macro, and it'll
be consistent from then on.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
At several places we modify EXT4_I(inode)->i_state without holding
i_mutex (ext4_release_file, ext4_bmap, ext4_journalled_writepage,
ext4_do_update_inode, ...). These modifications are racy and we can
lose updates to i_state. So convert handling of i_state to use bitops
which are atomic.
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When compiling with EXT4FS_DEBUG on, gcc will complain with following warnings:
linux-2.6/fs/ext4/ialloc.c: In function ‘ext4_count_free_inodes’:
linux-2.6/fs/ext4/ialloc.c:1192: warning: format ‘%lu’ expects type
‘long unsigned int’, but argument 2 has type ‘ext4_group_t’
So add a type cast to suppress it.
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The goal inode is specificed by inode number which belongs
to [1; s_inodes_count].
Signed-off-by: Johann Lombardi <johann@sun.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Enhance the inode allocator to take a goal inode number as a
paremeter; if it is specified, it takes precedence over Orlov or
parent directory inode allocation algorithms.
The extents migration function uses the goal inode number so that the
extent trees allocated the migration function use the correct flex_bg.
In the future, the goal inode functionality will also be used to
allocate an adjacent inode for the extended attributes.
Also, for testing purposes the goal inode number can be specified via
/sys/fs/{dev}/inode_goal. This can be useful for testing inode
allocation beyond 2^32 blocks on very large filesystems.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Instead of using a random number to determine the goal parent grop for
the Orlov top directories, use a hash of the directory name. This
allows for repeatable results when trying to benchmark filesystem
layout algorithms.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the caller isn't planning on modifying the block group descriptors,
there's no need to pass in a pointer to a struct buffer_head. Nuking
this saves a tiny amount of CPU time and stack space usage.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
