Commit Graph

9733 Commits

Author SHA1 Message Date
Linus Torvalds
14986a34e1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull namespace updates from Eric Biederman:
 "This set of changes is a number of smaller things that have been
  overlooked in other development cycles focused on more fundamental
  change. The devpts changes are small things that were a distraction
  until we managed to kill off DEVPTS_MULTPLE_INSTANCES. There is an
  trivial regression fix to autofs for the unprivileged mount changes
  that went in last cycle. A pair of ioctls has been added by Andrey
  Vagin making it is possible to discover the relationships between
  namespaces when referring to them through file descriptors.

  The big user visible change is starting to add simple resource limits
  to catch programs that misbehave. With namespaces in general and user
  namespaces in particular allowing users to use more kinds of
  resources, it has become important to have something to limit errant
  programs. Because the purpose of these limits is to catch errant
  programs the code needs to be inexpensive to use as it always on, and
  the default limits need to be high enough that well behaved programs
  on well behaved systems don't encounter them.

  To this end, after some review I have implemented per user per user
  namespace limits, and use them to limit the number of namespaces. The
  limits being per user mean that one user can not exhause the limits of
  another user. The limits being per user namespace allow contexts where
  the limit is 0 and security conscious folks can remove from their
  threat anlysis the code used to manage namespaces (as they have
  historically done as it root only). At the same time the limits being
  per user namespace allow other parts of the system to use namespaces.

  Namespaces are increasingly being used in application sand boxing
  scenarios so an all or nothing disable for the entire system for the
  security conscious folks makes increasing use of these sandboxes
  impossible.

  There is also added a limit on the maximum number of mounts present in
  a single mount namespace. It is nontrivial to guess what a reasonable
  system wide limit on the number of mount structure in the kernel would
  be, especially as it various based on how a system is using
  containers. A limit on the number of mounts in a mount namespace
  however is much easier to understand and set. In most cases in
  practice only about 1000 mounts are used. Given that some autofs
  scenarious have the potential to be 30,000 to 50,000 mounts I have set
  the default limit for the number of mounts at 100,000 which is well
  above every known set of users but low enough that the mount hash
  tables don't degrade unreaonsably.

  These limits are a start. I expect this estabilishes a pattern that
  other limits for resources that namespaces use will follow. There has
  been interest in making inotify event limits per user per user
  namespace as well as interest expressed in making details about what
  is going on in the kernel more visible"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (28 commits)
  autofs:  Fix automounts by using current_real_cred()->uid
  mnt: Add a per mount namespace limit on the number of mounts
  netns: move {inc,dec}_net_namespaces into #ifdef
  nsfs: Simplify __ns_get_path
  tools/testing: add a test to check nsfs ioctl-s
  nsfs: add ioctl to get a parent namespace
  nsfs: add ioctl to get an owning user namespace for ns file descriptor
  kernel: add a helper to get an owning user namespace for a namespace
  devpts: Change the owner of /dev/pts/ptmx to the mounter of /dev/pts
  devpts: Remove sync_filesystems
  devpts: Make devpts_kill_sb safe if fsi is NULL
  devpts: Simplify devpts_mount by using mount_nodev
  devpts: Move the creation of /dev/pts/ptmx into fill_super
  devpts: Move parse_mount_options into fill_super
  userns: When the per user per user namespace limit is reached return ENOSPC
  userns; Document per user per user namespace limits.
  mntns: Add a limit on the number of mount namespaces.
  netns: Add a limit on the number of net namespaces
  cgroupns: Add a limit on the number of cgroup namespaces
  ipcns: Add a  limit on the number of ipc namespaces
  ...
2016-10-06 09:52:23 -07:00
Linus Torvalds
41844e3620 Staging/IIO patches for 4.9-rc1
Here is the big staging and IIO driver pull request for 4.9-rc1.
 
 There are a lot of patches in here, the majority due to the
 drivers/staging/greybus/ subsystem being merged in with full development
 history that went back a few years, in order to preserve the work that
 those developers did over time.  This was done the same way that btrfs
 was merged into the tree, so all should be ok there.
 
 Lots and lots of tiny cleanups happened in the tree as well, due to the
 Outreachy application process and lots of other developers showing up
 for the first time to clean code up.  Along with those changes, we
 deleted a wireless driver, and added a raspberrypi driver (currently
 marked broken), and lots of new iio drivers.
 
 Overall the tree still shrunk with more lines removed than added, about
 10 thousand lines removed in total.  Full details are in the very long
 shortlog below.
 
 All of this has been in the linux-next tree with no issues.  There will
 be some merge problems with other subsystem trees, but those are all
 minor problems and shouldn't be hard to work out when they happen
 (MAINTAINERS and some lustre build problems with the IB tree.)
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iFYEABECABYFAlf0qWIPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfsp9GkAoLMa
 Dl/S8W02azDtKP893es5GXh3AJ4k8J9JlHgTS0RlzVJMvzkSZ2x7Vg==
 =j18s
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO updates from Greg KH:
 "Here is the big staging and IIO driver pull request for 4.9-rc1.

  There are a lot of patches in here, the majority due to the
  drivers/staging/greybus/ subsystem being merged in with full
  development history that went back a few years, in order to preserve
  the work that those developers did over time.

  Lots and lots of tiny cleanups happened in the tree as well, due to
  the Outreachy application process and lots of other developers showing
  up for the first time to clean code up.  Along with those changes, we
  deleted a wireless driver, and added a raspberrypi driver (currently
  marked broken), and lots of new iio drivers.

  Overall the tree still shrunk with more lines removed than added,
  about 10 thousand lines removed in total. Full details are in the very
  long shortlog below.

  All of this has been in the linux-next tree with no issues. There will
  be some merge problems with other subsystem trees, but those are all
  minor problems and shouldn't be hard to work out when they happen
  (MAINTAINERS and some lustre build problems with the IB tree)"

And furter from me asking for clarification about greybus:
 "Right now there is a phone from Motorola shipping with this code (a
  slightly older version, but the same tree), so even though Ara is not
  alive in the same form, the functionality is happening. We are working
  with the developers of that phone to merge the newer stuff in with
  their fork so they can use the upstream version in future versions of
  their phone product line.

  Toshiba has at least one chip shipping in their catalog that
  needs/uses this protocol over a Unipro link, and rumor has it that
  there might be more in the future.

  There are also other users of the greybus protocols, there is a talk
  next week at ELC that shows how it is being used across a network
  connection to control a device, and previous ELC talks have showed the
  protocol stack being used over USB to drive embedded Linux boards.
  I've also talked to some people who are starting to work to add a host
  controller driver to control arduinos as the greybus PHY protocols are
  very useful to control a serial/i2c/spio/whatever device across a
  random physical link, as it is a way to have a self-describing device
  be attached to a host without needing manual configuration.

  So yes, people are using it, and there is still the chance that it
  will show up in a phone/laptop/tablet/whatever from Google in the
  future as well, the tech isn't dead, even if the original large phone
  project happens to be"

* tag 'staging-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (3703 commits)
  Staging: fbtft: Fix bug in fbtft-core
  staging: rtl8188eu: fix double unlock error in rtw_resume_process()
  staging:r8188eu: remove GEN_MLME_EXT_HANDLER macro
  staging:r8188eu: remove GEN_DRV_CMD_HANDLER macro
  staging:r8188eu: remove GEN_EVT_CODE macro
  staging:r8188eu: remove GEN_CMD_CODE macro
  staging:r8188eu: remove pkt_newalloc member of the recv_buf structure
  staging:r8188eu: remove rtw_handle_dualmac declaration
  staging:r8188eu: remove (RGTRY|BSSID)_(OFT|SZ) macros
  staging:r8188eu: change rtl8188e_process_phy_info function argument type
  Staging: fsl-mc: Remove blank lines
  Staging: fsl-mc: Fix unaligned * in block comments
  Staging: comedi: Align the * in block comments
  Staging : ks7010 : Fix block comments warninig
  Staging: vt6655: Remove explicit NULL comparison using Coccinelle
  staging: rtl8188eu: core: rtw_xmit: Use macros instead of constants
  staging: rtl8188eu: core: rtw_xmit: Move constant of the right side
  staging: dgnc: Fix lines longer than 80 characters
  Staging: dgnc: constify attribute_group structures
  Staging: most: hdm-dim2: constify attribute_group structures
  ...
2016-10-05 14:50:51 -07:00
Linus Torvalds
58e4411b2d spi: Updates for v4.9
The SPI subsystem has also had quite a quiet release, though with a
 fairly large set of per-driver changes and several new drivers.  The
 bulk of the changes are:
 
  - Lots and lots of cleanups and improvements for the fsl-espi driver.
  - New drivers for Broadcom MSPI/iProc/STB, Cavium ThunderX and J-Core.
 -----BEGIN PGP SIGNATURE-----
 
 iQEwBAABCAAaBQJX84MLExxicm9vbmllQGtlcm5lbC5vcmcACgkQJNaLcl1Uh9CD
 Ywf/bCrjKApw6Yvfww3HmoR91LoDhax56ypS8H45H6UNWNqEcP0egBhbj0WGTSs6
 AVhNlebullti+FlqKbCBaldDZehEGHDvBLIfj7fVIqPS+RCfBfEVjGIESE5MRx+Q
 l0hjD3IwrwB74cMpZ1R3K7ecnsPbK7vouoFwyESw3cmW8I7YfjO2sKtQfzCyxlej
 qFfKwbhGqU6xkUCgx3+x4y6g7x5TRdwbWeDEVFJEeyKJ+e3BQRCg8YNs+vWWMM6P
 qjXI1Sd3AmlfONQb/vUr0MtlRPbOmDKX/Ibu/OSWCUI4QoPQdxCP+OsE0Wz9OIOp
 5a7IqQrWatUAXZ4AhojmLAjLLA==
 =zKMh
 -----END PGP SIGNATURE-----

Merge tag 'spi-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "The SPI subsystem has also had quite a quiet release, though with a
  fairly large set of per-driver changes and several new drivers. The
  bulk of the changes are:

   - lots and lots of cleanups and improvements for the fsl-espi driver

   - new drivers for Broadcom MSPI/iProc/STB, Cavium ThunderX and
     J-Core"

* tag 'spi-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (80 commits)
  spi: sc18is602: Change gpiod_set_value to gpiod_set_value_cansleep
  spi: pxa2xx: Fix build error because of missing header
  spi: imx: fix error return code in spi_imx_probe()
  spi: pxa2xx: Add support for GPIO descriptor chip selects
  spi: imx: Gracefully handle NULL master->cs_gpios
  spi: iproc-qspi: Add Broadcom iProc SoCs support
  spi: fsl-espi: improve return value handling in fsl_espi_probe
  spi: fsl-espi: simplify of_fsl_espi_probe
  spi: fsl-espi: remove unused variable in fsl_espi_setup
  spi: bcm-qspi: Fix error return code in bcm_qspi_probe()
  spi: bcm-qspi: Fix return value check in bcm_qspi_probe()
  spi: bcm-qspi: fix suspend/resume #ifdef
  spi: bcm-qspi: don't include linux/mtd/cfi.h
  spi: core: Use spi_sync_transfer() in spi_write()/spi_read()
  spi: fsl-espi: improve and extend register bit definitions
  spi: fsl-espi: align register access with other drivers
  spi: fsl-espi: improve and simplify interrupt handler
  spi: fsl-espi: simplify fsl_espi_setup_transfer
  spi: imx: support loopback mode on imx35
  spi: imx: set spi_bus_clk for mx1, mx31 and mx35
  ...
2016-10-04 11:20:10 -07:00
Linus Torvalds
7a53eea1f7 Char/Misc driver update for 4.9-rc1
Here's the "big" char and misc driver update for 4.9-rc1.
 
 Lots of little things here, all over the driver tree for subsystems that
 flow through me.  Nothing major that I can discern, full details are in
 the shortlog.
 
 All have been in the linux-next tree with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iFUEABECABYFAlfyOIQPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfsp9OQAlRy3
 gSKfQUlXjTs96Bx/I5PtWysAn0r8nyKZoP1oSgsTddOCEeXngTXc
 =4uPs
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here's the "big" char and misc driver update for 4.9-rc1.

  Lots of little things here, all over the driver tree for subsystems
  that flow through me. Nothing major that I can discern, full details
  are in the shortlog.

  All have been in the linux-next tree with no reported issues"

* tag 'char-misc-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (144 commits)
  drivers/misc/hpilo: Changes to support new security states in iLO5 FW
  at25: fix debug and error messaging
  misc/genwqe: ensure zero initialization
  vme: fake: remove unexpected unlock in fake_master_set()
  vme: fake: mark symbols static where possible
  spmi: pmic-arb: Return an error code if sanity check fails
  Drivers: hv: get rid of id in struct vmbus_channel
  Drivers: hv: make VMBus bus ids persistent
  mcb: Add a dma_device to mcb_device
  mcb: Enable PCI bus mastering by default
  mei: stop the stall timer worker if not needed
  clk: probe common clock drivers earlier
  vme: fake: fix build for 64-bit dma_addr_t
  ttyprintk: Neaten and simplify printing
  mei: me: add kaby point device ids
  coresight: tmc: mark symbols static where possible
  coresight: perf: deal with error condition properly
  Drivers: hv: hv_util: Avoid dynamic allocation in time synch
  fpga manager: Add hardware dependency to Zynq driver
  Drivers: hv: utils: Support TimeSync version 4.0 protocol samples.
  ...
2016-10-03 19:57:49 -07:00
Linus Torvalds
597f03f9d1 Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
 "Yet another batch of cpu hotplug core updates and conversions:

   - Provide core infrastructure for multi instance drivers so the
     drivers do not have to keep custom lists.

   - Convert custom lists to the new infrastructure. The block-mq custom
     list conversion comes through the block tree and makes the diffstat
     tip over to more lines removed than added.

   - Handle unbalanced hotplug enable/disable calls more gracefully.

   - Remove the obsolete CPU_STARTING/DYING notifier support.

   - Convert another batch of notifier users.

   The relayfs changes which conflicted with the conversion have been
   shipped to me by Andrew.

   The remaining lot is targeted for 4.10 so that we finally can remove
   the rest of the notifiers"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  cpufreq: Fix up conversion to hotplug state machine
  blk/mq: Reserve hotplug states for block multiqueue
  x86/apic/uv: Convert to hotplug state machine
  s390/mm/pfault: Convert to hotplug state machine
  mips/loongson/smp: Convert to hotplug state machine
  mips/octeon/smp: Convert to hotplug state machine
  fault-injection/cpu: Convert to hotplug state machine
  padata: Convert to hotplug state machine
  cpufreq: Convert to hotplug state machine
  ACPI/processor: Convert to hotplug state machine
  virtio scsi: Convert to hotplug state machine
  oprofile/timer: Convert to hotplug state machine
  block/softirq: Convert to hotplug state machine
  lib/irq_poll: Convert to hotplug state machine
  x86/microcode: Convert to hotplug state machine
  sh/SH-X3 SMP: Convert to hotplug state machine
  ia64/mca: Convert to hotplug state machine
  ARM/OMAP/wakeupgen: Convert to hotplug state machine
  ARM/shmobile: Convert to hotplug state machine
  arm64/FP/SIMD: Convert to hotplug state machine
  ...
2016-10-03 19:43:08 -07:00
Linus Torvalds
1a4a2bc460 Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull low-level x86 updates from Ingo Molnar:
 "In this cycle this topic tree has become one of those 'super topics'
  that accumulated a lot of changes:

   - Add CONFIG_VMAP_STACK=y support to the core kernel and enable it on
     x86 - preceded by an array of changes. v4.8 saw preparatory changes
     in this area already - this is the rest of the work. Includes the
     thread stack caching performance optimization. (Andy Lutomirski)

   - switch_to() cleanups and all around enhancements. (Brian Gerst)

   - A large number of dumpstack infrastructure enhancements and an
     unwinder abstraction. The secret long term plan is safe(r) live
     patching plus maybe another attempt at debuginfo based unwinding -
     but all these current bits are standalone enhancements in a frame
     pointer based debug environment as well. (Josh Poimboeuf)

   - More __ro_after_init and const annotations. (Kees Cook)

   - Enable KASLR for the vmemmap memory region. (Thomas Garnier)"

[ The virtually mapped stack changes are pretty fundamental, and not
  x86-specific per se, even if they are only used on x86 right now. ]

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
  x86/asm: Get rid of __read_cr4_safe()
  thread_info: Use unsigned long for flags
  x86/alternatives: Add stack frame dependency to alternative_call_2()
  x86/dumpstack: Fix show_stack() task pointer regression
  x86/dumpstack: Remove dump_trace() and related callbacks
  x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder
  oprofile/x86: Convert x86_backtrace() to use the new unwinder
  x86/stacktrace: Convert save_stack_trace_*() to use the new unwinder
  perf/x86: Convert perf_callchain_kernel() to use the new unwinder
  x86/unwind: Add new unwind interface and implementations
  x86/dumpstack: Remove NULL task pointer convention
  fork: Optimize task creation by caching two thread stacks per CPU if CONFIG_VMAP_STACK=y
  sched/core: Free the stack early if CONFIG_THREAD_INFO_IN_TASK
  lib/syscall: Pin the task stack in collect_syscall()
  x86/process: Pin the target stack in get_wchan()
  x86/dumpstack: Pin the target stack when dumping it
  kthread: Pin the stack via try_get_task_stack()/put_task_stack() in to_live_kthread() function
  sched/core: Add try_get_task_stack() and put_task_stack()
  x86/entry/64: Fix a minor comment rebase error
  iommu/amd: Don't put completion-wait semaphore on stack
  ...
2016-10-03 16:13:28 -07:00
Linus Torvalds
af79ad2b1f Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler changes from Ingo Molnar:
 "The main changes are:

   - irqtime accounting cleanups and enhancements. (Frederic Weisbecker)

   - schedstat debugging enhancements, make it more broadly runtime
     available. (Josh Poimboeuf)

   - More work on asymmetric topology/capacity scheduling. (Morten
     Rasmussen)

   - sched/wait fixes and cleanups. (Oleg Nesterov)

   - PELT (per entity load tracking) improvements. (Peter Zijlstra)

   - Rewrite and enhance select_idle_siblings(). (Peter Zijlstra)

   - sched/numa enhancements/fixes (Rik van Riel)

   - sched/cputime scalability improvements (Stanislaw Gruszka)

   - Load calculation arithmetics fixes. (Dietmar Eggemann)

   - sched/deadline enhancements (Tommaso Cucinotta)

   - Fix utilization accounting when switching to the SCHED_NORMAL
     policy. (Vincent Guittot)

   - ... plus misc cleanups and enhancements"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
  sched/irqtime: Consolidate irqtime flushing code
  sched/irqtime: Consolidate accounting synchronization with u64_stats API
  u64_stats: Introduce IRQs disabled helpers
  sched/irqtime: Remove needless IRQs disablement on kcpustat update
  sched/irqtime: No need for preempt-safe accessors
  sched/fair: Fix min_vruntime tracking
  sched/debug: Add SCHED_WARN_ON()
  sched/core: Fix set_user_nice()
  sched/fair: Introduce set_curr_task() helper
  sched/core, ia64: Rename set_curr_task()
  sched/core: Fix incorrect utilization accounting when switching to fair class
  sched/core: Optimize SCHED_SMT
  sched/core: Rewrite and improve select_idle_siblings()
  sched/core: Replace sd_busy/nr_busy_cpus with sched_domain_shared
  sched/core: Introduce 'struct sched_domain_shared'
  sched/core: Restructure destroy_sched_domain()
  sched/core: Remove unused @cpu argument from destroy_sched_domain*()
  sched/wait: Introduce init_wait_entry()
  sched/wait: Avoid abort_exclusive_wait() in __wait_on_bit_lock()
  sched/wait: Avoid abort_exclusive_wait() in ___wait_event()
  ...
2016-10-03 13:39:00 -07:00
Linus Torvalds
12b7bcb43e Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "The main kernel side changes were:

   - uprobes enhancements (Masami Hiramatsu)

   - Uncore group events enhancements (David Carrillo-Cisneros)

   - x86 Intel: Add support for Skylake server uncore PMUs (Kan Liang)

   - x86 Intel: LBR cleanups and enhancements, for better branch
     annotation tracking (Peter Zijlstra)

   - x86 Intel: Add support for PTWRITE and power event tracing
     (Alexander Shishkin)

   - ... various fixes, cleanups and smaller enhancements.

  Lots of tooling changes - a couple of highlights:

   - Support event group view with hierarchy mode in 'perf top' and
     'perf report' (Namhyung Kim)

     e.g.:

     $ perf record -e '{cycles,instructions}' make
     $ perf report --hierarchy --stdio
     ...
     #   Overhead  Command / Shared Object / Symbol
     # ......................  ..................................
     ...
     25.74%  27.18%sh
     19.96%  24.14%libc-2.24.so
      9.55%  14.64%[.] __strcmp_sse2
      1.54%   0.00%[.] __tfind
      1.07%   1.13%[.] _int_malloc
      0.95%   0.00%[.] __strchr_sse2
      0.89%   1.39%[.] __tsearch
      0.76%   0.00%[.] strlen

   - Add branch stack / basic block info to 'perf annotate --stdio',
     where for each branch, we add an asm comment after the instruction
     with information on how often it was taken and predicted. See
     example with color output at:

       http://vger.kernel.org/~acme/perf/annotate_basic_blocks.png

     (Peter Zijlstra)

   - Add support for using symbols in address filters with Intel PT and
     ARM CoreSight (hardware assisted tracing facilities) (Adrian
     Hunter, Mathieu Poirier)

   - Add support for interacting with Coresight PMU ETMs/PTMs, that are
     IP blocks to perform hardware assisted tracing on a ARM CPU core
     (Mathieu Poirier)

   - Support generating cross arch probes, i.e. if you specify a vmlinux
     file for different arch than the one in the host machine,

        $ perf probe --definition function_name args

     will generate the probe definition string needed to append to the
     target machine /sys/kernel/debug/tracing/kprobes_events file, using
     scripting (Masami Hiramatsu).

   - Allow configuring the default 'perf report -s' sort order in
     ~/.perfconfig, for instance, "sym,dso" may be more fitting for
     kernel developers. (Arnaldo Carvalho de Melo)

   - ... plus lots of other changes, refactorings, features and fixes"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (149 commits)
  perf tests: Add dwarf unwind test for powerpc
  perf probe: Match linkage name with mangled name
  perf probe: Fix to cut off incompatible chars from group name
  perf probe: Skip if the function address is 0
  perf probe: Ignore the error of finding inline instance
  perf intel-pt: Fix decoding when there are address filters
  perf intel-pt: Enable decoder to handle TIP.PGD with missing IP
  perf intel-pt: Read address filter from AUXTRACE_INFO event
  perf intel-pt: Record address filter in AUXTRACE_INFO event
  perf intel-pt: Add a helper function for processing AUXTRACE_INFO
  perf intel-pt: Fix missing error codes processing auxtrace_info
  perf intel-pt: Add support for recording the max non-turbo ratio
  perf intel-pt: Fix snapshot overlap detection decoder errors
  perf probe: Increase debug level of SDT debug messages
  perf record: Add support for using symbols in address filters
  perf symbols: Add dso__last_symbol()
  perf record: Fix error paths
  perf record: Rename label 'out_symbol_exit'
  perf script: Fix vanished idle symbols
  perf evsel: Add support for address filters
  ...
2016-10-03 12:47:28 -07:00
Linus Torvalds
72d39926f0 ACPI material for v4.9-rc1
- Update of the ACPICA code in the kernel to upstream revision 20160831 with
    the following major changes:
    * New mechanism for GPE masking.
    * Fixes for issues related to the LoadTable operator and table loading.
    * Fixes for issues related to so-called module-level code (MLC), that is
      AML that doesn't belong to any methods.
    * Change of the return value of the _OSI method to reflect the Windows
      behavior.
    * GAS (Generic Address Structure) support fix related to 32-bit FADT
      addresses.
    * Elimination of unnecessary FADT version 2 support.
    * ACPI tools fixes and cleanups.
    From Bob Moore, Lv Zheng, and Jung-uk Kim.
 
  - ACPI sysfs interface updates to fix GPE handling (on top of the new GPE
    masking mechanism in ACPICA) and issues related to table loading (Lv Zheng).
 
  - New watchdog driver based on the ACPI WDAT (ACPI Watchdog Action Table),
    needed on some platforms to replace the iTCO watchdog that doesn't work there
    and related updates of the intel_pmc_ipc, i2c/i801 and MFD/lcp_ich drivers
    (Mika Westerberg).
 
  - Driver core fix to prevent it from leaking secondary fwnode objects during
    device removal (Lukas Wunner).
 
  - New definitions of built-in properties for UART in ACPI-based x86 SoC drivers
    and a 8250_dw driver quirk for the APM X-Gene SoC (Heikki Krogerus).
 
  - New device ID for the Vulcan SPI controller and constification of local
    strucures in the AMD SoC (APD) ACPI driver (Kamlakant Patel, Julia Lawall).
 
  - Fix for a bug causing the allocation of PCI resorces to fail if
    ACPI-enumerated child platform devices are registered below the PCI
    devices in question (Mika Westerberg).
 
  - Change of the default polarity for PCI legacy IRQs to high on systems
    booting wth ACPI on platforms with a GIC interrupt controller model
    fixing the discrepancy between the specification and HW behavior (Lorenzo
    Pieralisi).
 
  - Fixes for the handling of system suspend/resume in the ACPI EC driver and
    update of that driver to make it cope with the cases when the EC device
    defined in the ECDT has to be used throughout the entire system life cycle
    (Lv Zheng).
 
  - Update of the ACPI CPPC library to allow it to batch requests sent over the
    PCC channel (to reduce overhead), to support the fixed functional hardware
    (FFH) CPPC registers access type, to notify the mailbox framework about TX
    completions when the interrupt flag is set for the PCC mailbox, and to
    support HW-Reduced Communication Subspace type 2 (Ashwin Chaugule, Prashanth
    Prakash, Srinivas Pandruvada, Hoan Tran).
 
  - ACPI button driver fix and documentation update related to the handling of
    laptop lids (Lv Zheng).
 
  - ACPI battery driver initialization fix (Carlos Garnacho).
 
  - ACPI GPIO enumeration documentation update (Mika Westerberg).
 
  - Assorted updates of the core ACPI bus type code (Lukas Wunner, Lv Zheng).
 
  - Assorted cleanups of the ACPI table parsing code and the x86-specific ACPI
    code (Al Stone).
 
  - Fixes for assorted ACPI-related issues found in linux-next (Wei Yongjun).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJX8Y5+AAoJEILEb/54YlRx73oP/RiAi86NKjOj+GfYceVe37jn
 6lSqoMugjgTQHRYvYiQCjJ/BR0GzQZqUkz9TAu1Op14+rhTH3OhSfPizzJWCpVfA
 G9l9ZRQNnsKNs14bbYmWtmWduh46dFLVFJqo+M/0H3ZMFZu6Adcb+1SBtXHUoQ6L
 z69ngFxTu3yRvqS4cmm5h7SOx5W2uZZl8zViJW8jgyGhUBStG87gzR6wsYBldGCk
 XFxcaGWBXRccWGAQLSwfs0psQccEooCqbpsDqaUdrK/mI0rsQr88f25ZxEE7Zw7H
 bv3py1cgJBZRq36L7eBGQXjIE7YQey6qG2lug2zsUJWe+vzy2vHjHVJHuBXKKgv3
 txOA6QZx63UgEyN3zFT7K5ek6uOnkKdeE+s+Laj+K/x4V2R6gbtgO011EVcXy+bI
 NvqsO76tfPHpwrn5s1VVc5lcEBEPHKHb+WulHrqhSSU4ivk0gtJDeSI+c8xta6YT
 XwSry5tozDLkG1uEZqkyY1XTlOUAHO8E6YcrlOv2z1+mG7L8OH/vCp1apzgexsZA
 1683AH5cwKc3KaP+4QdKGdxY2BDxb7OTVh3cGy4kAYb6tqQ/vj7vlRiJvtaMBtFw
 xJn3buuagwJzKtgebpA565opvyFAfUX/RNFlTP63aXAefSAgq6KLq70vKFxkIZto
 H1LpUbmiEbuBml8CBGb1
 =xDOQ
 -----END PGP SIGNATURE-----

Merge tag 'acpi-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "First off, the ACPICA code in the kernel is updated to upstream
  revision 20160831 that brings in a few bug fixes and cleanups. In
  particular, it is possible to mask GPEs now (and the sysfs interface
  for GPE control is fixed on top of that), problems related to the
  table loading mechanism are fixed and all code related to FADT version
  2 (which has never been part of the ACPI specification) is dropped.

  On the new features front, there is a new watchdog driver based on the
  ACPI WDAT (ACPI Watchdog Action Table), needed on some platforms to
  replace the iTCO watchdog that doesn't work there, and some UART
  devices get new definitions of built-in properties (to be accessed via
  the generic device properties API).

  Also, included is a fix for an ACPI-related PCI resorces allocation
  issue and a few problems in the EC driver and in the button and
  battery drivers are fixed.

  In addition to that, the ACPI CPPC library is updated to make batching
  of requests sent over the PCC channel possible (which reduces the PCC
  usage overhead substantially in some cases) and to support functional
  fixed hardware (FFH) type of CPPC registers access (which will allow
  CPPC to be used on x86 too in the future).

  As usual, there are some assorted fixes and cleanups too.

  Specifics:

   - Update of the ACPICA code in the kernel to upstream revision
     20160831 with the following major changes:

      * New mechanism for GPE masking.
      * Fixes for issues related to the LoadTable operator and table
        loading.
      * Fixes for issues related to so-called module-level code (MLC),
        that is AML that doesn't belong to any methods.
      * Change of the return value of the _OSI method to reflect the
        Windows behavior.
      * GAS (Generic Address Structure) support fix related to 32-bit
        FADT addresses.
      * Elimination of unnecessary FADT version 2 support.
      * ACPI tools fixes and cleanups.

     From Bob Moore, Lv Zheng, and Jung-uk Kim.

   - ACPI sysfs interface updates to fix GPE handling (on top of the new
     GPE masking mechanism in ACPICA) and issues related to table
     loading (Lv Zheng).

   - New watchdog driver based on the ACPI WDAT (ACPI Watchdog Action
     Table), needed on some platforms to replace the iTCO watchdog that
     doesn't work there and related updates of the intel_pmc_ipc,
     i2c/i801 and MFD/lcp_ich drivers (Mika Westerberg).

   - Driver core fix to prevent it from leaking secondary fwnode objects
     during device removal (Lukas Wunner).

   - New definitions of built-in properties for UART in ACPI-based x86
     SoC drivers and a 8250_dw driver quirk for the APM X-Gene SoC
     (Heikki Krogerus).

   - New device ID for the Vulcan SPI controller and constification of
     local strucures in the AMD SoC (APD) ACPI driver (Kamlakant Patel,
     Julia Lawall).

   - Fix for a bug causing the allocation of PCI resorces to fail if
     ACPI-enumerated child platform devices are registered below the PCI
     devices in question (Mika Westerberg).

   - Change of the default polarity for PCI legacy IRQs to high on
     systems booting wth ACPI on platforms with a GIC interrupt
     controller model fixing the discrepancy between the specification
     and HW behavior (Lorenzo Pieralisi).

   - Fixes for the handling of system suspend/resume in the ACPI EC
     driver and update of that driver to make it cope with the cases
     when the EC device defined in the ECDT has to be used throughout
     the entire system life cycle (Lv Zheng).

   - Update of the ACPI CPPC library to allow it to batch requests sent
     over the PCC channel (to reduce overhead), to support the fixed
     functional hardware (FFH) CPPC registers access type, to notify the
     mailbox framework about TX completions when the interrupt flag is
     set for the PCC mailbox, and to support HW-Reduced Communication
     Subspace type 2 (Ashwin Chaugule, Prashanth Prakash, Srinivas
     Pandruvada, Hoan Tran).

   - ACPI button driver fix and documentation update related to the
     handling of laptop lids (Lv Zheng).

   - ACPI battery driver initialization fix (Carlos Garnacho).

   - ACPI GPIO enumeration documentation update (Mika Westerberg).

   - Assorted updates of the core ACPI bus type code (Lukas Wunner, Lv
     Zheng).

   - Assorted cleanups of the ACPI table parsing code and the
     x86-specific ACPI code (Al Stone).

   - Fixes for assorted ACPI-related issues found in linux-next (Wei
     Yongjun)"

* tag 'acpi-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (98 commits)
  ACPI / documentation: Use recommended name in GPIO property names
  watchdog: wdat_wdt: Fix warning for using 0 as NULL
  watchdog: wdat_wdt: fix return value check in wdat_wdt_probe()
  platform/x86: intel_pmc_ipc: Do not create iTCO watchdog when WDAT table exists
  i2c: i801: Do not create iTCO watchdog when WDAT table exists
  mfd: lpc_ich: Do not create iTCO watchdog when WDAT table exists
  ACPI / bus: Adjust ACPI subsystem initialization for new table loading mode
  ACPICA: Parser: Fix a regression in LoadTable support
  ACPICA: Tables: Fix "UNLOAD" code path lock issues
  ACPI / watchdog: Add support for WDAT hardware watchdog
  ACPI / platform: Pay attention to parent device's resources
  PCI: Add pci_find_resource()
  ACPI / CPPC: Support PCC with interrupt flag
  ACPI / sysfs: Update sysfs signature handling code
  ACPI / sysfs: Fix an issue for LoadTable opcode
  ACPICA: Tables: Fix a regression in acpi_tb_find_table()
  ACPI / tables: Remove duplicated include from tables.c
  ACPI / APD: constify local structures
  x86: ACPI: make variable names clearer in acpi_parse_madt_lapic_entries()
  x86: ACPI: remove extraneous white space after semicolon
  ...
2016-10-03 10:11:58 -07:00
Rafael J. Wysocki
9274139f4e Merge branch 'acpica'
* acpica: (45 commits)
  ACPICA: Parser: Fix a regression in LoadTable support
  ACPICA: Tables: Fix "UNLOAD" code path lock issues
  ACPICA: Tables: Fix a regression in acpi_tb_find_table()
  ACPICA: Update version to 20160831
  ACPICA: Tables: Tune table mutex to be a leaf lock
  ACPICA: Dispatcher: Fix a mutex issue for method auto serialization
  ACPICA: Namespace: Fix dynamic table loading issues
  ACPICA: Namespace: Add acpi_ns_get_node_unlocked()
  ACPICA: Interpreter: Fix MLC issues by switching to new term_list grammar for table loading
  ACPICA: Update return value for intenal _OSI method
  ACPICA: Tables: Override all 64-bit GAS fields when acpi_gbl_use32_bit_fadt_addresses is TRUE
  ACPICA: Tables: Add new table events indicating table installation/uninstallation
  ACPICA: Tables: Remove wrong table event macros
  ACPICA: Tables: Remove acpi_tb_install_fixed_table()
  ACPICA: Add a couple of casts to uthex.c
  ACPICA: Cleanup for all string-to-integer conversions
  ACPICA: Debugger: Add subcommand for predefined name execution
  ACPICA: Update version to 20160729
  ACPICA: OSL: Fix a regression that old GCC requires a workaround for strchr()
  ACPICA: OSL: Cleanup the inclusion order of the compiler-specific headers
  ...
2016-10-02 01:37:32 +02:00
Mark Brown
2ce0468433 Merge remote-tracking branches 'spi/topic/ti-qspi', 'spi/topic/tools', 'spi/topic/txx9' and 'spi/topic/xlp' into spi-next 2016-09-30 09:14:22 -07:00
Mark Brown
3424ff29a0 Merge remote-tracking branches 'spi/topic/rspi', 'spi/topic/sc18is602', 'spi/topic/sh-msiof', 'spi/topic/spidev-test' and 'spi/topic/st-ssc4' into spi-next 2016-09-30 09:14:18 -07:00
Mark Brown
07216b5503 Merge remote-tracking branch 'spi/fix/spidev' into spi-linus 2016-09-30 09:14:04 -07:00
Thomas Gleixner
d7e25c66c9 Merge branch 'x86/urgent' into x86/asm
Get the cr4 fixes so we can apply the final cleanup
2016-09-30 12:38:28 +02:00
Ingo Molnar
536e0e81e0 Merge branch 'linus' into sched/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-30 10:44:27 +02:00
Linus Torvalds
c6169de730 Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:

 - Four fixes for "flush hint" support.

   Flush hints are addresses advertised by the ACPI 6+ NFIT (NVDIMM
   Firmware Interface Table) that when written and fenced guarantee that
   writes pending in platform write buffers (outside the cpu) have been
   flushed to media.  They might also be used by hypervisors as a
   trigger condition to flush guest-persistent memory ranges to storage.

    Fix a potential data corruption issue, a broken definition of the
    hint array, a wrong allocation size for the unit test implementation
    of the flush hint table, and missing NULL check in an error path.

    The unit test, while it did not prevent these bugs from being
    merged, at least triggered occasional crashes in advance of
    production usages.

 - Fix handling of ACPI DSM error status results.  The DSM mechanism
   allows communication with platform and memory device firmware.  We
   correctly parse known errors, but were silently ignoring others.

   Fix it to consistently fail any command with a non-zero status return
   that we otherwise do not interpret / handle.

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm, region: fix flush hint table thinko
  nfit: fail DSMs that return non-zero status by default
  libnvdimm: fix devm_nvdimm_memremap() error path
  tools/testing/nvdimm: fix allocation range for mock flush hint tables
  nvdimm: fix PHYS_PFN/PFN_PHYS mixup
2016-09-29 14:59:11 -07:00
Ravi Bangoria
d18019a53a perf tests: Add dwarf unwind test for powerpc
The user stack dump feature was recently added for powerpc. But there
was no test case available to test it.

This test works same as on other architectures by preparing a stack
frame on the perf test thread and comparing each frame by unwinding it.

  $ ./perf test 50
    50: Test dwarf unwind    : Ok

User stack dump for powerpc: https://lkml.org/lkml/2016/4/28/482

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1474267100-31079-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:18:21 -03:00
Masami Hiramatsu
d5a00296a6 perf probe: Match linkage name with mangled name
Match linkage name with mangled name if exists. The linkage_name is used
for storing mangled name of the object.

Thus, this allows 'perf probe' to find appropriate probe point from
mangled symbol as below.

E.g. without this fix:
  ----
  $ perf probe -x /usr/lib64/libstdc++.so.6 \
    -D _ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv
  Probe point '_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv'
  not found.
    Error: Failed to add events.
  ----

With this fix, perf probe can find the correct one.
  ----
  $ perf probe -x /usr/lib64/libstdc++.so.6 \
    -D _ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv
  p:probe_libstdc/_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv
  /usr/lib64/libstdc++.so.6.0.22:0x8ca60
  ----

Committer notes:

After the fix, setting it for real (no -D/--definition, that amounts to
a --dry-run):

  # perf probe -x /usr/lib64/libstdc++.so.6 _ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv
  Added new event:
    probe_libstdc:_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv (on _ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv in /usr/lib64/libstdc++.so.6.0.22)

  You can now use it in all perf tools, such as:

	perf record -e probe_libstdc:_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv -aR sleep 1

  # perf probe -l probe_libstdc:*
    probe_libstdc:_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv (on is_open@libstdc++-v3/include/fstream in /usr/lib64/libstdc++.so.6.0.22)
  #

Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/147464493162.29804.16715053505069382443.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:17:08 -03:00
Masami Hiramatsu
35726d3a4c perf probe: Fix to cut off incompatible chars from group name
Cut off the characters which can not use for group name of uprobes
when making it based on executable filename.

For example, if the exec name is libstdc++.so, without this fix
perf probe generates "probe_libstdc++" as the group name, but
it is failed to set because '+' can not be used for group name.

With this fix perf accepts only alphabet, number or '_' for group
name, thus perf generates "probe_libstdc" as the group name.

E.g. with this fix, you can see the event name has no "+".
  ----
  $ ./perf probe -x /usr/lib64/libstdc++.so.6 -D is_open
  p:probe_libstdc/is_open /usr/lib64/libstdc++.so.6.0.22:0x8ca80
  p:probe_libstdc/is_open_1 /usr/lib64/libstdc++.so.6.0.22:0x8ca70
  p:probe_libstdc/is_open_2 /usr/lib64/libstdc++.so.6.0.22:0x8ca60
  p:probe_libstdc/is_open_3 /usr/lib64/libstdc++.so.6.0.22:0xb0ad0
  p:probe_libstdc/is_open_4 /usr/lib64/libstdc++.so.6.0.22:0xecca9
  ----

Committer note:

Before this fix:

  # perf probe -x /usr/lib64/libstdc++.so.6 is_open
  Failed to write event: Invalid argument
    Error: Failed to add events.
  #

After the fix:

  # perf probe -x /usr/lib64/libstdc++.so.6 is_open
  Added new events:
    probe_libstdc:is_open (on is_open in /usr/lib64/libstdc++.so.6.0.22)
    probe_libstdc:is_open_1 (on is_open in /usr/lib64/libstdc++.so.6.0.22)
    probe_libstdc:is_open_2 (on is_open in /usr/lib64/libstdc++.so.6.0.22)
    probe_libstdc:is_open_3 (on is_open in /usr/lib64/libstdc++.so.6.0.22)
    probe_libstdc:is_open_4 (on is_open in /usr/lib64/libstdc++.so.6.0.22)

  You can now use it in all perf tools, such as:

	  perf record -e probe_libstdc:is_open_4 -aR sleep 1

  # perf probe -l probe_libstdc:*
    probe_libstdc:is_open (on is_open@libstdc++-v3/include/fstream in /usr/lib64/libstdc++.so.6.0.22)
    probe_libstdc:is_open_1 (on is_open@libstdc++-v3/include/fstream in /usr/lib64/libstdc++.so.6.0.22)
    probe_libstdc:is_open_2 (on is_open@libstdc++-v3/include/fstream in /usr/lib64/libstdc++.so.6.0.22)
    probe_libstdc:is_open_3 (on is_open@src/c++98/basic_file.cc in /usr/lib64/libstdc++.so.6.0.22)
    probe_libstdc:is_open_4 (on stdio_filebuf:5@include/ext/stdio_filebuf.h in /usr/lib64/libstdc++.so.6.0.22)
  #

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/147464491667.29804.9553638175441827970.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:17:08 -03:00
Masami Hiramatsu
0ad45b33c5 perf probe: Skip if the function address is 0
Skip probes if the entry address of the target function is 0.  This can
happen when we're handling C++ debuginfo files.

E.g. without this fix, below case still fail.
  ----
  $ ./perf probe -x /usr/lib64/libstdc++.so.6 -vD is_open
  probe-definition(0): is_open
  symbol:is_open file:(null) line:0 offset:0 return:0 lazy:(null)
  0 arguments
  symbol:catch file:(null) line:0 offset:0 return:0 lazy:(null)
  symbol:throw file:(null) line:0 offset:0 return:0 lazy:(null)
  symbol:rethrow file:(null) line:0 offset:0 return:0 lazy:(null)
  Open Debuginfo file: /usr/lib/debug/usr/lib64/libstdc++.so.6.0.22.debug
  Try to find probe point from debuginfo.
  Matched function: is_open [295df]
  found inline addr: 0x8ca80
  Probe point found: is_open+0
  found inline addr: 0x8ca70
  Probe point found: is_open+0
  found inline addr: 0x8ca60
  Probe point found: is_open+0
  Matched function: is_open [6527f]
  Matched function: is_open [9fe8a]
  Probe point found: is_open+0
  Matched function: is_open [19710b]
  found inline addr: 0xecca9
  Probe point found: stdio_filebuf+57
  found inline addr: 0x0
  Probe point found: swap+0
  Matched function: is_open [19fc9d]
  Probe point found: is_open+0
  Found 7 probe_trace_events.
  p:probe_libstdc++/is_open /usr/lib64/libstdc++.so.6.0.22:0x8ca80
  p:probe_libstdc++/is_open_1 /usr/lib64/libstdc++.so.6.0.22:0x8ca70
  p:probe_libstdc++/is_open_2 /usr/lib64/libstdc++.so.6.0.22:0x8ca60
  p:probe_libstdc++/is_open_3 /usr/lib64/libstdc++.so.6.0.22:0xb0ad0
  p:probe_libstdc++/is_open_4 /usr/lib64/libstdc++.so.6.0.22:0xecca9
  Failed to synthesize probe trace event.
    Error: Failed to add events. Reason: Invalid argument (Code: -22)
  ----
This is because some instances have entry_pc == 0 (see 19710b and
19fc9d). With this fix, those are skipped.

  ----
  $ ./perf probe -x /usr/lib64/libstdc++.so.6 -D is_open
  p:probe_libstdc++/is_open /usr/lib64/libstdc++.so.6.0.22:0x8ca80
  p:probe_libstdc++/is_open_1 /usr/lib64/libstdc++.so.6.0.22:0x8ca70
  p:probe_libstdc++/is_open_2 /usr/lib64/libstdc++.so.6.0.22:0x8ca60
  p:probe_libstdc++/is_open_3 /usr/lib64/libstdc++.so.6.0.22:0xb0ad0
  p:probe_libstdc++/is_open_4 /usr/lib64/libstdc++.so.6.0.22:0xecca9
  ----

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/147464490707.29804.14277897643725143867.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:17:07 -03:00
Masami Hiramatsu
f8da4b5155 perf probe: Ignore the error of finding inline instance
Ignore the error when the perf probe failed to find inline function
instances. This can happen when we search a method in C++ debuginfo.  If
there is completely no instance in target, perf probe can return an
error.

E.g. without this fix:
  ----
  $ perf probe -x /usr/lib64/libstdc++.so.6 -vD showmanyc
  probe-definition(0): showmanyc
  symbol:showmanyc file:(null) line:0 offset:0 return:0 lazy:(null)
  0 arguments
  symbol:catch file:(null) line:0 offset:0 return:0 lazy:(null)
  symbol:throw file:(null) line:0 offset:0 return:0 lazy:(null)
  symbol:rethrow file:(null) line:0 offset:0 return:0 lazy:(null)
  Open Debuginfo file: /usr/lib/debug/usr/lib64/libstdc++.so.6.0.22.debug
  Try to find probe point from debuginfo.
  Matched function: showmanyc
  An error occurred in debuginfo analysis (-2).
  Trying to use symbols.
  Failed to find symbol showmanyc in /usr/lib64/libstdc++.so.6.0.22
    Error: Failed to add events. Reason: No such file or directory (Code: -2)
  ----

This is because one of showmanyc is defined as inline but no instance
found. With this fix, it is succeeded to show as below.
  ----
  $ perf probe -x /usr/lib64/libstdc++.so.6 -D showmanyc
  p:probe_libstdc++/showmanyc /usr/lib64/libstdc++.so.6.0.22:0xb0e50
  p:probe_libstdc++/showmanyc_1 /usr/lib64/libstdc++.so.6.0.22:0xc7c40
  p:probe_libstdc++/showmanyc_2 /usr/lib64/libstdc++.so.6.0.22:0xecfa0
  p:probe_libstdc++/showmanyc_3 /usr/lib64/libstdc++.so.6.0.22:0x115fc0
  p:probe_libstdc++/showmanyc_4 /usr/lib64/libstdc++.so.6.0.22:0x121a90
  ----

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/147464489775.29804.3190419491209875936.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:17:07 -03:00
Adrian Hunter
2acee108f5 perf intel-pt: Fix decoding when there are address filters
Due to errata SKL014 "Intel PT TIP.PGD May Not Have Target IP Payload",
the Intel PT decoder needs to match address filters against TIP.PGD
packets.  Parse the address filters and implement the decoder's
'pgd_ip()' callback to match the IP against the filter regions.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-17-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:17:06 -03:00
Adrian Hunter
9f1d122b52 perf intel-pt: Enable decoder to handle TIP.PGD with missing IP
When address filters are used, the decoder must detect the end of a
filter region (or a branch into a tracestop region) by matching Packet
Generation Disabled (TIP.PGD) packets against the object code using the
IP given in the packet. However, due to errata SKL014 "Intel PT TIP.PGD
May Not Have Target IP Payload", that IP may not be present.

Enable the decoder to handle that by adding a new callback function
'pgd_ip()' which indicates whether the IP is not traced, in which case
that is the point where the trace was disabled.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-16-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:17:06 -03:00
Adrian Hunter
2b9e32c47f perf intel-pt: Read address filter from AUXTRACE_INFO event
Read the address filter from the AUXTRACE_INFO event in preparation for
using it to assist in decoding.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:17:05 -03:00
Adrian Hunter
c093f308ce perf intel-pt: Record address filter in AUXTRACE_INFO event
The address filter is needed to help decode the trace, so store it in
the AUXTRACE_INFO event.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-14-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:17:05 -03:00
Adrian Hunter
40b746a063 perf intel-pt: Add a helper function for processing AUXTRACE_INFO
Add a helper function 'intel_pt_has()' to make it easier to determine
which members the AUXTRACE_INFO event contains.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-13-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:17:04 -03:00
Adrian Hunter
4d34e10a9f perf intel-pt: Fix missing error codes processing auxtrace_info
Fix 2 places where the err variable was not being set.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-12-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:17:04 -03:00
Adrian Hunter
fa8025c374 perf intel-pt: Add support for recording the max non-turbo ratio
Previously the maximum non-turbo ratio was calculated from TSC assuming
a 100 MHz multiplier which is correct for current hardware supporting
Intel PT.  However more recent kernels also now export the value, so use
that in preference to the calculated value.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-11-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:17:03 -03:00
Adrian Hunter
810c398bc0 perf intel-pt: Fix snapshot overlap detection decoder errors
Fix occasional decoder errors decoding trace data collected in snapshot
mode.

Snapshot mode can take successive snapshots of trace which might overlap.
The decoder checks whether there is an overlap but only looks at the
current and previous buffer. However buffers that do not contain
synchronization (i.e. PSB) packets cannot be decoded or used for overlap
checking. That means the decoder actually needs to check overlaps between
the current buffer and the previous buffer that contained usable data.
Make that change.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable@vger.kernel.org # v4.3+
Link: http://lkml.kernel.org/r/1474641528-18776-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:17:03 -03:00
Adrian Hunter
f9655200ec perf probe: Increase debug level of SDT debug messages
Two SDT debug messages can occur for every DSO which is too noisy.
Consequently, increase debug level of SDT messages.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:17:02 -03:00
Adrian Hunter
1b36c03e35 perf record: Add support for using symbols in address filters
Symbols come from either the DSO or /proc/kallsyms for the kernel.
Details of the functionality can be found in Documentation/perf-record.txt.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:17:02 -03:00
Adrian Hunter
cd67f99fe9 perf symbols: Add dso__last_symbol()
Add a function to find the last symbol in a DSO. This will be used when
parsing address filters to calculate a region that includes the entire
DSO.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:17:01 -03:00
Adrian Hunter
5c01ad60b8 perf record: Fix error paths
Some error paths do not tidy-up. Fix that.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:17:01 -03:00
Adrian Hunter
394c01ed8a perf record: Rename label 'out_symbol_exit'
In preparation for fixing the error paths, rename label
'out_symbol_exit' to be 'out' because that error path can be used
irrespective of whether symbols (or anything else) has been initialized.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:17:00 -03:00
Adrian Hunter
e7a06a5353 perf script: Fix vanished idle symbols
Commit 608c34de0b ("perf symbols: Mark if a symbol is idle in the
library") causes idle symbols to vanish from perf script output. That is
because print functions suppress symbols marked as 'idle'.

However, suppression of 'idle' functions is only used by 'perf top' and
'perf top' does not use the print functions.  Consequently that
functionality can simply be removed from the print functions.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: 608c34de0b ("perf symbols: Mark if a symbol is idle in the library")
Link: http://lkml.kernel.org/r/1474641528-18776-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:17:00 -03:00
Mathieu Poirier
1e85748437 perf evsel: Add support for address filters
This patch makes it possible to use the current filter framework with
address filters.  That way address filters for HW tracers such as
CoreSight and Intel PT can be communicated to the kernel drivers.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1474037045-31730-4-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:16:59 -03:00
Mathieu Poirier
3541c034d9 perf evsel: New tracepoint specific function
Making function perf_evsel__append_filter() static and introducing a new
tracepoint specific function to append filters.  That way we eliminate
redundant code and avoid formatting mistake.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1474037045-31730-3-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:16:59 -03:00
Mathieu Poirier
b15d0a4c82 perf tools: Make perf_evsel__append_filter() generic
By making function perf_evsel__append_filter() take a format rather than
an operator it is possible to reuse the code for other purposes (ex.
Intel PT and CoreSight) than tracepoints.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1474037045-31730-2-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:16:58 -03:00
Simon Que
2acad19500 perf tools: Update documentation info about quipper
The existing link is outdated. The most recent quipper code can be found at the
new URL.

Committer notes:

Quipper is a C++ parser that can be used to convert from a perf.data
file to and from a protobuf, a Chromium OS facility.

Signed-off-by: Simon Que <sque@chromium.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chong Jiang <chongjiang@chromium.org>
Link: http://lkml.kernel.org/n/tip-4q1nm7jl3vovp66p5bki20pq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29 11:16:44 -03:00
Arnaldo Carvalho de Melo
f0bbd60226 perf trace: Beautify sched_[gs]et_attr return value
Both return errno, show the string associated then.

More work needed to capture the sched_attr arg to beautify it in turn,
probably using BPF.

Before:

     0.210 ( 0.001 ms): sched_setattr(uattr: 0x7ffc684f02b0) = -22

After the patch, for this sched_attr, all other parms are zero, so not
shown:

        struct sched_attr attr = {
                .size           = sizeof(attr),
                .sched_policy   = SCHED_DEADLINE,
                .sched_runtime  = 10 * USECS_PER_SEC,
                .sched_period   = 30 * USECS_PER_SEC,
                .sched_deadline = attr.sched_period,
        };

     0.321 ( 0.002 ms): sched_setattr(uattr: 0x7ffc44116da0) = -1 EINVAL Invalid argument

  [root@jouet c]# perf trace -e sched_setattr ./sched_deadline
  Couldn't negotiate deadline: Invalid argument
     0.229 ( 0.003 ms): sched_setattr(uattr: 0x7ffd8dcd8df0) = -1 EINVAL Invalid argument
  [root@jouet c]#

Now to figure out the reason for this EINVAL.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-tyot2n7e48zm8pdw8tbcm3sl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-28 13:48:04 -03:00
Wang Nan
f2c8852e6e perf data: Fix building in 32 bit platform with libbabeltrace
On ARM32 building it report following error when we build with
libbabeltrace:

  util/data-convert-bt.c: In function 'add_bpf_output_values':
  util/data-convert-bt.c:440:3: error: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'unsigned int' [-Werror=format]
  cc1: all warnings being treated as errors

Fix it by changing %lu to %zu.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Fixes: 6122d57e9f ("perf data: Support converting data from bpf_perf_event_output()")
Link: http://lkml.kernel.org/r/1475035126-146587-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-28 10:38:20 -03:00
Adrian Hunter
973186ca7f perf tools: Fix MMAP event synthesis broken by MAP_HUGETLB change
Patch "perf record: Mark MAP_HUGETLB when synthesizing mmap events") breaks
MMAP event synthesis.  The executable name comparison will match any name
if the length is zero, resulting in all the user space maps becoming
anonymous.  This is particularly noticeable with system-wide traces.
Example:

	perf record -a sleep 1
	perf script --show-mmap-events

Committer note:

That is not the case when, say, one has a qemu instance and libvirt actually
mounts hugetlbfs. To test this I had to first umount it:

[root@jouet ~]# mount | grep hugetlbfs
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,seclabel)
[root@jouet ~]#

After unmount it the error fixed by this patch manifests itself:

  # perf record -a sleep 1
  # perf script --show-mmap-events | grep PERF_RECORD_MMAP2 | head -5
    systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x557d47ed8000(0x167000) @ 0 fd:00 3146896 7362875424355726126]: r-xp //anon
    systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c488d000(0x4000) @ 0 fd:00 3153214 7362875424355726126]: r-xp //anon
    systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c4a92000(0x3d000) @ 0 fd:00 3159276 7362875424355726126]: r-xp //anon
    systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c4cd5000(0x15000) @ 0 fd:00 3153725 7362875424355726126]: r-xp //anon
    systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c4eeb000(0x25000) @ 0 fd:00 3153260 7362875424355726126]: r-xp //anon
  #

Fixed version:

  # perf record -a sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 1.419 MB perf.data (182 samples) ]
  # perf script --show-mmap-events | grep PERF_RECORD_MMAP2 | head -5
    systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x557d47ed8000(0x167000) @ 0 fd:00 3146896 7362875424355726126]: r-xp /usr/lib/systemd/systemd
    systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c488d000(0x4000) @ 0 fd:00 3153214 7362875424355726126]: r-xp /usr/lib64/libuuid.so.1.3.0
    systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c4a92000(0x3d000) @ 0 fd:00 3159276 7362875424355726126]: r-xp /usr/lib64/libblkid.so.1.1.0
    systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c4cd5000(0x15000) @ 0 fd:00 3153725 7362875424355726126]: r-xp /usr/lib64/libz.so.1.2.8
    systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c4eeb000(0x25000) @ 0 fd:00 3153260 7362875424355726126]: r-xp /usr/lib64/liblzma.so.5.2.2
[root@jouet ~]#

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-28 10:21:15 -03:00
Adrian Hunter
a9e57009da perf record: Fix documentation 'event_sources' -> 'event_source'
Change '/sys/bus/event_sources' to the correct path which is
'/sys/bus/event_source'.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-27 15:00:29 -03:00
Matthew Wilcox
62fd5258eb radix tree test suite: Test radix_tree_replace_slot() for multiorder entries
When we replace a multiorder entry, check that all indices reflect the
new value.

Also, compile the test suite with -O2, which shows other problems with
the code due to some dodgy pointer operations in the radix tree code.

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-25 11:49:16 -07:00
Josh Poimboeuf
c1fad9ef7e objtool: Add do_task_dead() to global noreturn list
objtool reports the following new warning:

  kernel/exit.o: warning: objtool: do_exit() falls through to next function complete_and_exit()

The warning is caused by do_exit()'s new call to do_task_dead(), which
is a new "noreturn" function which objtool doesn't know about yet,
introduced by:

  9af6528ee9 ("sched/core: Optimize __schedule()")

( objtool has to know all the global noreturn functions so it can follow
  the control flow of any functions which call them.  Unfortunately they
  need to be hard-coded because there's no automated way to detect them. )

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kbuild-all@01.org
Cc: tipbuild@zytor.com
Link: http://lkml.kernel.org/r/20160922212125.zbuewckqll4yur25@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-23 07:28:05 +02:00
Ingo Molnar
6b652de2b2 perf/core improvements:
New features:
 
 - Add support for interacting with Coresight PMU ETMs/PTMs, that are IP blocks
   to perform hardware assisted tracing on a ARM CPU core (Mathieu Poirier)
 
 Infrastructure:
 
 - Histogram prep work for the upcoming c2c tool (Jiri Olsa)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJX5Ef6AAoJENZQFvNTUqpAKh0QAJVQzQHymIre8QT5rP0+9cOF
 4ct3nLSRoc+LxIgcgeeoxYbqh2JBWN3773ezYk4hDcop3KE9riE1oE9VVG2Os/HP
 vbQvudykktJz+P+zdp6nmMppmipLs6+kpIgBNwl9rwWE0rLre/tCujHtK4/cpgFa
 g1tJkKD7EeQ12Q/OnWsnWpDrxmx6tL0qNxt/ayraT86Bx+A/GnuTWrAcGrQ5LK0e
 3opphj1XSUD+OOKXmZZDSNlTgweBEuF3QA+SYwLmjFYIeYg6uXtHN4Z1rr3CgwWr
 DnXlMv/p3OuPLzsJRiBdcOxS1coYtHVAfjJa2NDSG9iEFO7mWNas69IqfeiwQVSp
 oFIHo5inD4dY7sdeytGnLGuTbhtMiftWSe6LwL6aTOUZZlo5l8E55PuXgW3zt+GY
 0PjoT0a5bBdXY9wIKupIjWUxyS8Z549ySYNhgXgZv1u6ckeOeKPW8XtiJMckXsxG
 Ssfw+7xQtJ3VNoOZBofijRKN9JYtYOqqX+wVHOhPvlrbFh1uLlLoFuRoZ1AmJPok
 rQkPjzcItIMe1opvXxJYTjbyptd9OXeKQGynNm7R2Gbhm27Rt9hdQSz+xZIoN0dJ
 ntt/Qiu9LeG3jr8eIwB97TW0rFtaxt6b6LecxCg1H9i4f6kUlpCnPHp+IBFwrG/j
 71ZsHII88tndNYZCwX4s
 =l8wx
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo-20160922' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements from Arnaldo Carvalho de Melo:

New features:

- Add support for interacting with Coresight PMU ETMs/PTMs, that are IP blocks
  to perform hardware assisted tracing on a ARM CPU core (Mathieu Poirier)

Infrastructure changes:

- Histogram prep work for the upcoming c2c tool (Jiri Olsa)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-23 07:21:38 +02:00
Ingo Molnar
739f1bcd04 Merge branch 'perf/urgent' into perf/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-23 07:20:33 +02:00
Andrey Vagin
6ad92bf63e tools/testing: add a test to check nsfs ioctl-s
There are two new ioctl-s:
One ioctl for the user namespace that owns a file descriptor.
One ioctl for the parent namespace of a namespace file descriptor.

The test checks that these ioctl-s works and that they handle a case
when a target namespace is outside of the current process namespace.

Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2016-09-22 19:59:41 -05:00
Jiri Olsa
2d83145414 perf hists: Make hists__fprintf_headers function global
Will be used from external places in the upcoming c2c patch series.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474558645-19956-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-22 13:08:59 -03:00
Jiri Olsa
bd28d0c598 perf hists: Make __hist_entry__snprintf function global
Will be used from external places in the upcoming c2c patch series.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474558645-19956-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-22 13:08:58 -03:00