We can check if SIIF is enabled by testing the sclp_info struct
instead of testing the sie control block eca variable as that
facility is always enabled if available.
Also let's cleanup all the ipte related struct member accesses
which currently happen by referencing the KVM struct via the
VCPU struct.
Making the KVM struct the parameter to the ipte_* functions
removes one level of indirection which makes the code more readable.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/all/20220711084148.25017-2-pmorel@linux.ibm.com/
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
When the SIGP interpretation facility is present and a VCPU sends an
ecall to another VCPU in enabled wait, the sending VCPU receives a 56
intercept (partial execution), so KVM can wake up the receiving CPU.
Note that the SIGP interpretation facility will take care of the
interrupt delivery and KVM's only job is to wake the receiving VCPU.
For PV, the sending VCPU will receive a 108 intercept (pv notify) and
should continue like in the non-PV case, i.e. wake the receiving VCPU.
For PV and non-PV guests the interrupt delivery will occur through the
SIGP interpretation facility on SIE entry when SIE finds the X bit in
the status field set.
However, in handle_pv_notification(), there was no special handling for
SIGP, which leads to interrupt injection being requested by KVM for the
next SIE entry. This results in the interrupt being delivered twice:
once by the SIGP interpretation facility and once by KVM through the
IICTL.
Add the necessary special handling in handle_pv_notification(), similar
to handle_partial_execution(), which simply wakes the receiving VCPU and
leave interrupt delivery to the SIGP interpretation facility.
In contrast to external calls, emergency calls are not interpreted but
also cause a 108 intercept, which is why we still need to call
handle_instruction() for SIGP orders other than ecall.
Since kvm_s390_handle_sigp_pei() is now called for all SIGP orders which
cause a 108 intercept - even if they are actually handled by
handle_instruction() - move the tracepoint in kvm_s390_handle_sigp_pei()
to avoid possibly confusing trace messages.
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 5.7
Fixes: da24a0cc58 ("KVM: s390: protvirt: Instruction emulation")
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20220718130434.73302-1-nrb@linux.ibm.com
Message-Id: <20220718130434.73302-1-nrb@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Move the Destroy Secure Configuration UVC before the loop to destroy
the memory. If the protected VM has memory, it will be cleaned up and
made accessible by the Destroy Secure Configuration UVC. The struct
page for the relevant pages will still have the protected bit set, so
the loop is still needed to clean that up.
Switching the order of those two operations does not change the
outcome, but it is significantly faster.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-13-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-13-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Refactor kvm_s390_pv_deinit_vm to improve readability and simplify the
improvements that are coming in subsequent patches.
No functional change intended.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-12-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-12-imbrenda@linux.ibm.com>
[frankja@linux.ibm.com: Dropped commit message line regarding review]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
When ptep_get_and_clear_full is called for a mm teardown, we will now
attempt to destroy the secure pages. This will be faster than export.
In case it was not a teardown, or if for some reason the destroy page
UVC failed, we try with an export page, like before.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-11-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-11-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Add an mmu_notifier for protected VMs. The callback function is
triggered when the mm is torn down, and will attempt to convert all
protected vCPUs to non-protected. This allows the mm teardown to use
the destroy page UVC instead of export.
Also make KVM select CONFIG_MMU_NOTIFIER, needed to use mmu_notifiers.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-10-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-10-imbrenda@linux.ibm.com>
[frankja@linux.ibm.com: Conflict resolution for mmu_notifier.h include
and struct kvm_s390_pv]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Future changes make it necessary to call this function from pv.c.
While we are at it, let's properly document kvm_s390_cpus_from_pv() and
kvm_s390_cpus_to_pv().
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-9-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-9-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Do not use memset to clean the whole struct kvm_s390_pv; instead,
explicitly clear the fields that need to be cleared.
Upcoming patches will introduce new fields in the struct kvm_s390_pv
that will not need to be cleared.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-8-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-8-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Due to upcoming changes, it will be possible to temporarily have
multiple protected VMs in the same address space, although only one
will be actually active.
In that scenario, it is necessary to perform an export of every page
that is to be imported, since the hardware does not allow a page
belonging to a protected guest to be imported into a different
protected guest.
This also applies to pages that are shared, and thus accessible by the
host.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-7-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-7-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Use the new protected_count field as a counter instead of the old
is_protected flag. This will be used in upcoming patches.
Increment the counter when a secure configuration is created, and
decrement it when it is destroyed. Previously the flag was set when the
set secure parameters UVC was performed.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-6-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-6-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Refactor s390_reset_acc so that it can be reused in upcoming patches.
We don't want to hold all the locks used in a walk_page_range for too
long, and the destroy page UVC does take some time to complete.
Therefore we quickly gather the pages to destroy, and then destroy them
without holding all the locks.
The new refactored function optionally allows to return early without
completing if a fatal signal is pending (and return and appropriate
error code). Two wrappers are provided to call the new function.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-5-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-5-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
With upcoming patches, normal guests might touch secure pages.
This patch extends the existing exception handler to convert the pages
to non secure also when the exception is triggered by a normal guest.
This can happen for example when a secure guest reboots; the first
stage of a secure guest is non secure, and in general a secure guest
can reboot into non-secure mode.
If the secure memory of the previous boot has not been cleared up
completely yet (which will be allowed to happen in an upcoming patch),
a non-secure guest might touch secure memory, which will need to be
handled properly.
This means that gmap faults must be handled and not cause termination
of the process. The handling is the same as userspace accesses, it's
enough to translate the gmap address to a user address and then let the
normal user fault code handle it.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-4-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-4-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
A secure storage violation is triggered when a protected guest tries to
access secure memory that has been mapped erroneously, or that belongs
to a different protected guest or to the ultravisor.
With upcoming patches, protected guests will be able to trigger secure
storage violations in normal operation. This happens for example if a
protected guest is rebooted with deferred destroy enabled and the new
guest is also protected.
When the new protected guest touches pages that have not yet been
destroyed, and thus are accounted to the previous protected guest, a
secure storage violation is raised.
This patch adds handling of secure storage violations for protected
guests.
This exception is handled by first trying to destroy the page, because
it is expected to belong to a defunct protected guest where a destroy
should be possible. Note that a secure page can only be destroyed if
its protected VM does not have any CPUs, which only happens when the
protected VM is being terminated. If that fails, a normal export of
the page is attempted.
This means that pages that trigger the exception will be made
non-secure (in one way or another) before attempting to use them again
for a different secure guest.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-3-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-3-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Each secure guest must have a unique ASCE (address space control
element); we must avoid that new guests use the same page for their
ASCE, to avoid errors.
Since the ASCE mostly consists of the address of the topmost page table
(plus some flags), we must not return that memory to the pool unless
the ASCE is no longer in use.
Only a successful Destroy Secure Configuration UVC will make the ASCE
reusable again.
If the Destroy Configuration UVC fails, the ASCE cannot be reused for a
secure guest (either for the ASCE or for other memory areas). To avoid
a collision, it must not be used again. This is a permanent error and
the page becomes in practice unusable, so we set it aside and leak it.
On failure we already leak other memory that belongs to the ultravisor
(i.e. the variable and base storage for a guest) and not leaking the
topmost page table was an oversight.
This error (and thus the leakage) should not happen unless the hardware
is broken or KVM has some unknown serious bug.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: 29b40f105e ("KVM: s390: protvirt: Add initial vm and cpu lifecycle handling")
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-2-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-2-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
z16 also provides facility 197 (The processor-activity-instrumentation
extension 1). Let's add it to KVM.
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20220711115108.6494-1-borntraeger@linux.ibm.com
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Stephen Rothwell reported the htmldocs warning:
Documentation/virt/kvm/api.rst:5959: WARNING: Title underline too short.
4.137 KVM_S390_ZPCI_OP
--------------------
The warning is due to subheading underline on KVM_S390_ZPCI_OP section is
short of 2 dashes.
Extend the underline to fix the warning.
Link: https://lore.kernel.org/linux-next/20220711205557.183c3b14@canb.auug.org.au/
Fixes: a0c4d1109d6cc5 ("KVM: s390: add KVM_S390_ZPCI_OP to manage guest zPCI devices")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: kvm@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20220712092954.142027-4-bagasdotme@gmail.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
remove the duplicate includes. While at it sort the includes.
Reported-by: kernel test robot <yujie.liu@intel.com>
Fixes: 73f91b0043 ("KVM: s390: pci: enable host forwarding of Adapter Event Notifications")
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
We have information about the supported attestation header version
and plaintext attestation flag bits.
Let's expose it via the sysfs files.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/lkml/20220601100245.3189993-1-seiden@linux.ibm.com/
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
there is an unexpected word 'and' in the comments that need to be dropped
file: arch/s390/kvm/interrupt.c
line: 705
* Subsystem damage are the only two and and are indicated by
changed to:
* Subsystem damage are the only two and are indicated by
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Link: https://lore.kernel.org/lkml/20220622140720.7617-1-jiangjian@cdjrlc.com/
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Add the necessary code in s390 base, pci and KVM to enable interpretion
of PCI pasthru.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+SKTgaM0CPnbq/vKEXu8gLWmHHwFAmLL7HcACgkQEXu8gLWm
HHz0JA/8C/pG5JdeOfKA6ZgWuUtxh8NRAmn+XEh+sAPpdK1cmEc1Qt/UKteSFel4
cmqfaCELalq/BaFxtPS7Wn8Rf4pY8/GwEzwM0dNiS09pTWv0YMXql6+013nr1TJU
hWx5Pm9Za+T/UnbbHqlyJfjMf7/HELHmQYemDpCr6n1sIYMjsWIJI/P6ZsQiG/8V
iDZQGIM8mfUC+PMzxsYAQZQB3nm6noZfnWlAcuChDCmgk2ZxdXSdZlHneiLLiYlb
yZPOyTysA0H2iFgRGfXMI4Oz6vegr6xAcZ2c9mkc8lM42yKHQNpPa0PqEY+EzVV8
0iaMT3LKWQRdjzTq6E4I5wb74KQn/t1TbTzM5wznOQ6GySRhPvnXVLOuYyUf5d+0
PwtnfKyx2C5UtOn47Xuujp5FClP8NI8Se5uq6Myei5OtYAvrQtOFxiJAixLx8nCb
ca/migenYr+R5zYn5g3o6oo2BUJfF3Y1Q8nazz602JRu42aZzVFu2GNB062YjleK
w7SfIZNTh0picxSmoehSOQMVaiGY/C/ow7Xa+bLaCITQC3s8HY73m3gynaVOB23X
2umrC3HkTnH2ymqvDC6O/5QG7IUlSfjbWzN0TdmPfV5KeM7BmBvP4vxqxRYyTY7b
7UhFg820fZKZu4Ul740a2+HBNw73T8fc4xbZVJ6glJo3AdWQD5s=
=YD+W
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-pci-5.20' into kernelorgnext
KVM: s390/pci: enable zPCI for interpretive execution
Add the necessary code in s390 base, pci and KVM to enable interpretion
of PCI pasthru.
Add entries from the s390 kvm subdirectory related to pci passthrough.
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20220606203325.110625-22-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The KVM_S390_ZPCI_OP ioctl provides a mechanism for managing
hardware-assisted virtualization features for s390x zPCI passthrough.
Add the first 2 operations, which can be used to enable/disable
the specified device for Adapter Event Notification interpretation.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20220606203325.110625-21-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
When doing load/store interpretation, the maximum store block length is
determined by the underlying firmware, not the host kernel API. Reflect
that in the associated Query PCI Function Group clp capability and let
userspace decide which is appropriate to present to the guest.
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220606203325.110625-20-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The function handle is a system-wide unique identifier for a zPCI
device. With zPCI instruction interpretation, the host will no
longer be executing the zPCI instructions on behalf of the guest.
As a result, the guest needs to use the real function handle in
order for firmware to associate the instruction with the proper
PCI function. Let's provide that handle to the guest.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220606203325.110625-19-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
During vfio-pci open_device, pass the KVM associated with the vfio group
(if one exists). This is needed in order to pass a special indicator
(GISA) to firmware to allow zPCI interpretation facilities to be used
for only the specific KVM associated with the vfio-pci device. During
vfio-pci close_device, unregister the notifier.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-18-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
These routines will be invoked at the time an s390x vfio-pci device is
associated with a KVM (or when the association is removed), allowing
the zPCI device to enable or disable load/store intepretation mode;
this requires the host zPCI device to inform firmware of the unique
token (GISA designation) that is associated with the owning KVM.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-17-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
These routines will be wired into a kvm ioctl in order to respond to
requests to enable / disable a device for Adapter Event Notifications /
Adapter Interuption Forwarding.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-16-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The guest must have access to certain facilities in order to allow
interpretive execution of zPCI instructions and adapter event
notifications. However, there are some cases where a guest might
disable interpretation -- provide a mechanism via which we can defer
enabling the associated zPCI interpretation facilities until the guest
indicates it wishes to use them.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-15-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
In cases where interrupts are not forwarded to the guest via firmware,
KVM is responsible for ensuring delivery. When an interrupt presents
with the forwarding bit, we must process the forwarding tables until
all interrupts are delivered.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-14-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Initial setup for Adapter Event Notification Interpretation for zPCI
passthrough devices. Specifically, allocate a structure for forwarding of
adapter events and pass the address of this structure to firmware.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-13-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
This structure will be used to carry kvm passthrough information related to
zPCI devices.
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-12-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The current contents of vfio-pci-zdev are today only useful in a KVM
environment; let's tie everything currently under vfio-pci-zdev to
this Kconfig statement and require KVM in this case, reducing complexity
(e.g. symbol lookups).
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-11-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Store information about what IOAT designation types are supported by
underlying hardware as well as the largest store block size allowed.
These values will be needed by passthrough.
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-10-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
For passthrough devices, we will need to know the GISA designation of the
guest if interpretation facilities are to be used. Setup to stash this in
the zdev and set a default of 0 (no GISA designation) for now; a subsequent
patch will set a valid GISA designation for passthrough devices.
Also, extend mpcific routines to specify this stashed designation as part
of the mpcific command.
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-9-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
A subsequent patch will be issuing SIC from KVM -- export the necessary
routine and make the operation control definitions available from a header.
Because the routine will now be exported, let's rename __zpci_set_irq_ctrl
to zpci_set_irq_ctrl and get rid of the zero'd iib wrapper function of
the same name.
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-8-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
When doing device passthrough where interrupts are being forwarded from
host to guest, we wish to use a pinned section of guest memory as the
vector (the same memory used by the guest as the vector). To accomplish
this, add a new parameter for airq_iv_create which allows passing an
existing vector to be used instead of allocating a new one. The caller
is responsible for ensuring the vector is pinned in memory as well as for
unpinning the memory when the vector is no longer needed.
A subsequent patch will use this new parameter for zPCI interpretation.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-7-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
A subsequent patch will introduce an airq handler that requires additional
TPI information beyond directed vs floating, so pass the entire tpi_info
structure via the handler. Only pci actually uses this information today,
for the other airq handlers this is effectively a no-op.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-6-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Detect the Adapter Interruption Source ID Interpretation facility.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-3-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Hardware would directly write x2APIC ICR register instead of software
emulation in some circumstances, e.g when Intel IPI virtualization is
enabled. This behavior requires normal reserved bits checking to ensure
them input as zero, otherwise it will cause #GP. So we need mask out
those reserved bits from the data written to vICR register.
Remove Delivery Status bit emulation in test case as this flag
is invalid and not needed in x2APIC mode. KVM may ignore clearing
it during interrupt dispatch which will lead to fake test failure.
Opportunistically correct vector number for test sending IPI to
non-existent vCPUs.
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Message-Id: <20220623094511.26066-1-guang.zeng@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch add a self test that verifies user space can inject
UnCorrectable No Action required (UCNA) memory errors to the guest.
It also verifies that incorrectly configured MSRs for Corrected
Machine Check Interrupt (CMCI) emulation will result in #GP.
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220610171134.772566-9-juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch enables MCG_CMCI_P by default in kvm_mce_cap_supported. It
reuses ioctl KVM_X86_SET_MCE to implement injection of UnCorrectable
No Action required (UCNA) errors, signaled via Corrected Machine
Check Interrupt (CMCI).
Neither of the CMCI and UCNA emulations depends on hardware.
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220610171134.772566-8-juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds the emulation of IA32_MCi_CTL2 registers to KVM. A
separate mci_ctl2_banks array is used to keep the existing mce_banks
register layout intact.
In Machine Check Architecture, in addition to MCG_CMCI_P, bit 30 of
the per-bank register IA32_MCi_CTL2 controls whether Corrected Machine
Check error reporting is enabled.
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220610171134.772566-7-juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch updates the allocation of mce_banks with the array allocation
API (kcalloc) as a precedent for the later mci_ctl2_banks to implement
per-bank control of Corrected Machine Check Interrupt (CMCI).
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220610171134.772566-6-juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch calculates the number of lvt entries as part of
KVM_X86_MCE_SETUP conditioned on the presence of MCG_CMCI_P bit in
MCG_CAP and stores result in kvm_lapic. It translats from APIC_LVTx
register to index in lapic_lvt_entry enum. It extends the APIC_LVTx
macro as well as other lapic write/reset handling etc to support
Corrected Machine Check Interrupt.
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220610171134.772566-5-juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An APIC_LVTx macro is introduced to calcualte the APIC_LVTx register
offset based on the index in the lapic_lvt_entry enum. Later patches
will extend the APIC_LVTx macro to support the APIC_LVTCMCI register
in order to implement Corrected Machine Check Interrupt signaling.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220610171134.772566-4-juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch defines a lapic_lvt_entry enum used as explicit indices to
the apic_lvt_mask array. In later patches a LVT_CMCI will be added to
implement the Corrected Machine Check Interrupt signaling.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220610171134.772566-3-juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor APIC_VERSION so that the maximum number of LVT entries is
inserted at runtime rather than compile time. This will be used in a
subsequent commit to expose the LVT CMCI Register to VMs that support
Corrected Machine Check error counting/signaling
(IA32_MCG_CAP.MCG_CMCI_P=1).
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220610171134.772566-2-juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
