According to RM, the clock divider range is from 1 to 8, clock
prescaling ratio may be any power of 2 from 1 to 128.
So the supported divider is not all the value between
1 and 1024, just limited value in that range.
Create table for the supported divder and add function to
check the clock divider is available by comparing with
the table.
Fixes: d0250cf4f2 ("ASoC: fsl_asrc: Add an option to select internal ratio mode")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1641380883-20709-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some boards have the codec IRQ hooked-up as normally, so the driver can
still do things like headset vs headphones and button-press detection,
but instead of using one of the JD pins of the codec, an external GPIO
is used to report the jack-presence switch status of the jack.
Add support for boards which have this setup and which specify which
external GPIO to use in the special Android AMCR0F28 ACPI device.
And add a quirk for the Asus TF103C tablet which uses this setup.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-7-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some X86 tablets, which ship with Android as factory installed OS,
specify codec IRQs/GPIOS in a special Android AMCR0F28 ACPI device.
Add support for retrieving the codec IRQ from this ACPI device instead
of from the 10EC5640 device describing the codec itself and enable this
on Asus MemoPad 7 ME176C tablets.
This fixes jack-detect not working on these tablets.
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-6-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some boards have the codec IRQ hooked-up as normally, so the driver can
still do things like headset vs headphones and button-press detection,
but instead of using one of the JD pins of the codec, an external GPIO
is used to report the jack-presence switch status of the jack.
Add support for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On some boards where the firmware/fwnode information is in essence
read-only (x86 + ACPI boards) the i2c_client for the codec may contain
the wrong IRQ or no IRQ at all.
Since we only request the IRQ once snd_soc_component_set_jack() gets
called, allow machine drivers to override the IRQ with the proper one
through the data parameter to snd_soc_component_set_jack().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change jack_work from a struct work_struct to a struct delayed_work, this
is a preparation patch for adding support for boards where an external
GPIO is used for jack-detect, rather then one of the JD pins of the codec.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 2b9c8d2b3c ("ASoC: rt5640: Add the HDA header support") adds
re-queuing of the jack_work on resume when rt5640->jd_src != 0.
But the jack_work will unconditionally deref rt5640->jack and that might
be NULL. E.g. the sound/soc/intel/boards/bytcr_rt5640.c machine driver
call snd_soc_component_set_jack(codec, NULL, NULL) from pre_suspend to
disable the IRQ to avoid spurious wakeups, so when rt5640_resume()
runs rt5640->jack will be NULL in this case.
Make the queueing of the work conditional on rt5640->jack instead of
on rt5640->jd_src to fix this.
Fixes: 2b9c8d2b3c ("ASoC: rt5640: Add the HDA header support")
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A randconfig caught a compile warning that is now treated as a fatal
error:
sound/soc/codecs/ak4375.c:415:13: error: ‘ak4375_power_off’ defined but not used [-Werror=unused-function]
where ak4375_power_off() is used only from the PM handler.
As both suspend and resumes are already marked with __maybe_unused,
let's rip off the superfluous ifdef CONFIG_PM, so that the error above
can be avoided.
Fixes: 53778b8292 ("ASoC: Add AK4375 support")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220105162409.20635-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
This patch series adds support for the low power hibernation feature
on cs35l41. This allows the DSP memory to be retained whilst the
device enters a very low power state.
When the reset_gpio GPIO is used, it is better to put the codec
back into reset state when the driver unbinds.
Add a remove() function to accomplish that.
Suggested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220104180613.639317-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the case a device can support retaining the firmware memory across
low power states it is useful for the preloader widget to only power up
whilst actually loading/unloading the core, as opposed to the normal
operation where the widget is powered for the entire time a firmware is
preloaded onto the core. Add support for this mode and a flag to enable
it.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220105113026.18955-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It makes no sense to cache the test/user key registers, since they
require values written at specific times, mark them volatile. It is
probably best if they can't be accessed from user-space either, so
mark them precious as well.
The interrupt force, edge, polarity and debounce are all settings
applied to the IRQ rather than status bits and as such should not be
volatile.
The OTP trim values will require re-application in the event of a
cache sync and as such should not be volatile. The OTPID however
should be volatile.
The DSP scratch registers are used to read back an error/debug code
from the DSP on shutdown, as such these should be marked volatile.
Finally, add some missing defaults, add TST_FS_MON0, and allow the
DSP core control register to be cached.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220105113026.18955-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The wm_adsp_event should be called before the early_event on power
down, event stops the core running and early_event then powers down
the core. Additionally, the core should only be stopped if it was
actually running in the first place.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220105113026.18955-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add IDs for the CS35L51/53 variants, the functionality is shared with
CS35L41.
Signed-off-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220105113026.18955-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Trevor Wu <trevor.wu@mediatek.com>:
This series of patches repairs some problems for pcmif BE dai.
The unexpected control flow is corrected, and the missing playback
support of DPCM is added.
ASoC and HDA systems require the same errata patches, so
move it to the shared code using a function the correctly
applies the patches by revision
Also, move CS35L41_DSP1_CCM_CORE_CTRL write to errata
patch function as is required to be written at boot,
but not in regmap_register_patch sequence as will affect
waking up from hibernation
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211217115708.882525-5-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC and HDA systems for all revisions of CS35L41 will benefit
from having this initialization, so add it to reg_sequence of
each revision
By moving to reg_sequence all gains are set to zero. And boost,
monitoring parts, and class D amplifier are disabled.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211217115708.882525-4-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To support CS35L41 in HDA systems the HDA driver
for CS35L41 would have to duplicate some functions
that already exist on ASoC driver
So instead of duplicate the code, use the new lib
source as a shared resource for both ASoC and HDA
Also, change the way CONFIG_SND_SOC_CS35L41 is
selected, as reported by Intel Kernel test robot,
it is possible to build SND_SOC_CS35L41_SPI/I2C
without the main driver, which would lead to build
failures.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20211217115708.882525-2-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM1_BE should be a dai_link for both playback and capture.
In the patch, the missing DPCM playback support is added.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20211230084731.31372-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Originally, the conditions for preventing reentry are not correct.
dai->component->active is not the state specifically for pcmif dai, so it
is not a correct condition to indicate the status of pcmif dai.
On the other hand, snd_soc_dai_stream_actvie() in prepare ops for both
playback and capture possibly return true at the first entry when these
two streams are opened at the same time.
In the patch, I refer to the implementation in mt8192-dai-pcm.c.
Clock and enabling bit for PCMIF are managed by DAPM, and the condition
for prepare ops is replaced by the status of dai widget.
Fixes: 1f95c01911 ("ASoC: mediatek: mt8195: support pcm in platform driver")
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20211230084731.31372-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The mclk might not be registered as a fixed clk name "mclk" on some
platforms.
In those platforms, if the mclk needed to be controlled by codec driver
and acquired by a fixed name, it would be a problem.
This patch to fix the issue that wclk becomes an orphan due to the fixed
mclk's name.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211227055446.27563-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Playback pop is observed and the root cause is the reference clock
provided by MT8195 is diabled before RT5682 finishes the control flow.
To ensure the reference clock supplied to RT5682 is disabled after RT5682
finishes all register controls. We replace BCLK with MCLK for RT5682
reference clock, and makes use of set_bias_level_post to handle MCLK
which guarantees MCLK is off after all RT5682 register access.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20211228064821.27865-1-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because of the potential failure of the ioremap(), the buf->area could
be NULL.
Therefore, we need to check it and return -ENOMEM in order to transfer
the error.
Fixes: f09aecd50f ("ASoC: SAMSUNG: Add I2S0 internal dma driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211228034026.1659385-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The Chip ID - Register 01h contains the following description
as per the CS4265 datasheet:
"Bits 7 through 4 are the part number ID, which is 1101b (0Dh)"
The current error message is incorrect as it prints CS4265_CHIP_ID,
which is the register number, instead of printing the expected
part number ID value.
To make it clearer, also do a shift by 4, so that the error message
would become:
[ 4.218083] cs4265 1-004f: CS4265 Part Number ID: 0x0 Expected: 0xd
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211222141920.1482451-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
This series contains three topics.
1. SoundWire: Intel: remove pdm support
2. ASoC/SoundWire: dai: expand 'stream' concept beyond SoundWire
3. ASoC/SOF/SoundWire: fix suspend-resume on pause with dynamic pipelines
The topics are independent but the changes are dependent. So please
allow me to send them in one series.
Configure the speaker gpio pin based on power sequence of the DAPM
speaker events.
Enable speaker after widget power up and Disable before widget powerdown.
Signed-off-by: V sujith kumar Reddy <vsujithkumar.reddy@amd.com>
Link: https://lore.kernel.org/r/20211224150058.2444776-1-vsujithkumar.reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
return value form directly instead of
taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cm>
Signed-off-by: chiminghao <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20211209015707.409870-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Device nodes can be released after components have bound.
Shortens the lifecycle of the device nodes. Releases the reference
counts after snd_soc_register_card.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20211224064719.2031210-5-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Overloading the tx_mask with a linear value is asking for trouble and
only works because the codec_dai hw_params() is called before the
cpu_dai hw_params().
Move to the more generic set_stream() API to pass the hdac_stream
information.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211224021034.26635-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HDAudio ASoC support relies on the set_tdm_slots() helper to store
the HDaudio stream tag in the tx_mask. This only works because of the
pre-existing order in soc-pcm.c, where the hw_params() is handled for
codec_dais *before* cpu_dais. When the order is reversed, the
stream_tag is used as a mask in the codec fixup functions:
/* fixup params based on TDM slot masks */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
codec_dai->tx_mask)
soc_pcm_codec_params_fixup(&codec_params,
codec_dai->tx_mask);
As a result of this confusion, the codec_params_fixup() ends-up
generating bad channel masks, depending on what stream_tag was
allocated.
We could add a flag to state that the tx_mask is really not a mask,
but it would be quite ugly to persist in overloading concepts.
Instead, this patch suggests a more generic get/set 'stream' API based
on the existing model for SoundWire. We can expand the concept to
store 'stream' opaque information that is specific to different DAI
types. In the case of HDAudio DAIs, we only need to store a stream tag
as an unsigned char pointer. The TDM rx_ and tx_masks should really
only be used to store masks.
Rename get_sdw_stream/set_sdw_stream callbacks and helpers as
get_stream/set_stream. No functionality change beyond the rename.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20211224021034.26635-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't really need to pass a substream to the callback, we only need
the direction. No functionality change, only simplification to enable
improve suspend with paused streams.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20211224021034.26635-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have a helper, use it to simplify widget lookup
Suggested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211224021034.26635-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Stephan Gerhold <stephan@gerhold.net>:
Some sound card setups might require extra pin switches to allow
turning off certain audio components. simple-card supports this
already using the "pin-switches" and "widgets" device tree property.
This series makes it possible to use the same properties for the Qcom
sound cards.
To implement that, the function that parses the "pin-switches" property
in simple-card-utils.c is first moved into the ASoC core. Then two
simple function calls are added to the common Qcom sound card DT parser.
Finally there is a small patch for the msm8916-wcd-analog codec to make
it possible to model sound card setups used in some MSM8916 smartphones.
(See PATCH 2/4 for an explanation of some real example use cases.)
Using pin switches rather than patching codec drivers with switches was
originally suggested by Mark Brown on a patch for the tfa989x codec:
https://lore.kernel.org/alsa-devel/YXaMVHo9drCIuD3u@sirena.org.uk/
The analog codec has separate output paths for the left headphone channel
(HPH_L) and the right headphone channel (HPH_R). While they are usually
used together for actual headphones output, some devices also have an
analog speaker amplifier connected to one of the headphone channels.
To allow modelling that properly (and to avoid powering on the unneeded
output path), HPH_L and HPH_R should be represented by separate outputs
rather than a shared HEADPHONE output that always activates both paths.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20211214142049.20422-5-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the DT helpers in the ASoC core to parse the "pin-switches" and
"widgets" properties from the device tree. This allows adding extra
mixers to disable e.g. an extra speaker amplifier that would be
normally powered on automatically because it is connected to a shared
output pin.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20211214142049.20422-4-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core already has several helpers to parse card properties
from the device tree. Move the parsing code for "pin-switches" from
simple-card-utils to a shared snd_soc_of_parse_pin_switches() function
so other drivers can also use it to set up pin switches configured in
the device tree.
Cc: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20211214142049.20422-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The of_parse_phandle() document:
>>> Use of_node_put() on it when done.
The driver didn't call of_node_put(). Fixes the leak.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20211214040028.2992627-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
this series will improve how we are tracking the firmware's state to be able to
avoid communication with it when it is not going to answer due to a panic and
we will attempt to force power cycle the DSP to recover at the next runtime
suspend time.
The state handling brings in other improvements on the way the kernel reports
errors and DSP panics to reduce the printed lines for normal users, but at the
same time allowing developers (or for bug reports) to have more precise
information available to track down the issue.
We can now place messages easily in the correct debug level and not bound to the
static ERROR for some of the print chains, causing excess amount or partial
information to be printed, confusing users and machines (CI).
I would have prefered to split this series up, but it was developed together to
achieve a single goal to reduce the noise, but also provide the details we need
to be able to rootcause issues.
