This patch splits trace event initialization in two stages:
* ftrace enable
* sysfs event entry creation
This allows to capture trace events from an earlier point
by using 'trace_event' kernel parameter and is important
to trace boot-up allocations.
Note that, in order to enable events at core_initcall,
it's necessary to move init_ftrace_syscalls() from
core_initcall to early_initcall.
Link: http://lkml.kernel.org/r/1347461277-25302-1-git-send-email-elezegarcia@gmail.com
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In our application, we have trace markers spread through user-space.
We have markers in GL, X, etc. These are super handy for Chrome's
about:tracing feature (Chrome + system + kernel trace view), but
can be very distracting when you're trying to debug a kernel issue.
I normally, use "grep -v tracing_mark_write" but it would be nice
if I could just temporarily disable markers all together.
Link: http://lkml.kernel.org/r/1347066739-26285-1-git-send-email-msb@chromium.org
CC: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As Oleg pointed out in [0] uprobe should not use the ptrace interface
for enabling/disabling single stepping.
[0] http://lkml.kernel.org/r/20120730141638.GA5306@redhat.com
Add the new "__weak arch" helpers which simply call user_*_single_step()
as a preparation. This is only needed to not break the powerpc port, we
will fold this logic into arch_uprobe_pre/post_xol() hooks later.
We should also change handle_singlestep(), _disable_step(&uprobe->arch)
should be called before put_uprobe().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
The wrong MMF_HAS_UPROBES doesn't really hurt, just it triggers
the "slow" and unnecessary handle_swbp() path if the task hits
the non-uprobe breakpoint.
So this patch changes find_active_uprobe() to check every valid
vma and clear MMF_HAS_UPROBES if no uprobes were found. This is
adds the slow O(n) path, but it is only called in unlikely case
when the task hits the normal breakpoint first time after
uprobe_unregister().
Note the "not strictly accurate" comment in mmf_recalc_uprobes().
We can fix this, we only need to teach vma_has_uprobes() to return
a bit more more info, but I am not sure this worth the trouble.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Add the new MMF_RECALC_UPROBES flag, it means that MMF_HAS_UPROBES
can be false positive after remove_breakpoint() or uprobe_munmap().
It is also set by uprobe_dup_mmap(), this is not optimal but simple.
We could add the new hook, uprobe_dup_vma(), to set MMF_HAS_UPROBES
only if the new mm actually has uprobes, but I don't think this
makes sense.
The next patch will use this flag to clear MMF_HAS_UPROBES.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Nobody plays with uprobes_tree/uprobes_treelock in interrupt context,
no need to disable irqs.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Fix kprobes/x86 to support jprobes on ftrace-based kprobes.
Because of -mfentry support of ftrace, ftrace is now put
on the beginning of function where jprobes are put.
Originally ftrace-based kprobes doesn't support jprobe
because it will change regs->ip and ftrace doesn't support
changing IP and ftrace itself doesn't conflict jprobe.
However, ftrace -mfentry support moves mcount call on the
top of functions where jprobes are put. This means that
jprobe always conflicts with ftrace-based kprobe and fails.
This patch allows ftrace-based kprobes to support jprobes
by allowing to modify regs->ip and kprobes breakpoint
handler also allows to skip singlestepping because there
is a ftrace call (not an original instruction).
Link: http://lkml.kernel.org/r/20120905143125.10329.90836.stgit@localhost.localdomain
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 56449f437 "tracing: make the trace clocks available generally",
in April 2009, made trace_clock available unconditionally, since
CONFIG_X86_DS used it too.
Commit faa4602e47 "x86, perf, bts, mm: Delete the never used BTS-ptrace code",
in March 2010, removed CONFIG_X86_DS, and now only CONFIG_RING_BUFFER (split
out from CONFIG_TRACING for general use) has a dependency on trace_clock. So,
only compile in trace_clock with CONFIG_RING_BUFFER or CONFIG_TRACING
enabled.
Link: http://lkml.kernel.org/r/20120903024513.GA19583@leaf
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steve Rostedt asked for the merge of a single commit, into both
the RCU and the perf/tracing tree:
| Josh made a change to the tracing code that affects both the
| work Paul McKenney and I are currently doing. At the last
| Kernel Summit back in August, Linus said when such a case
| exists, it is best to make a separate branch based off of his
| tree and place the change there. This way, the repositories
| that need to share the change can both pull them in and the
| SHA1 will match for both. Whichever branch is pulled in first
| by Linus will also pull in the necessary change for the other
| branch as well.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andreas Bombe reported that the added ktime_t overflow checking added to
timespec_valid in commit 4e8b14526c ("time: Improve sanity checking of
timekeeping inputs") was causing problems with X.org because it caused
timeouts larger then KTIME_T to be invalid.
Previously, these large timeouts would be clamped to KTIME_MAX and would
never expire, which is valid.
This patch splits the ktime_t overflow checking into a new
timespec_valid_strict function, and converts the timekeeping codes
internal checking to use this more strict function.
Reported-and-tested-by: Andreas Bombe <aeb@debian.org>
Cc: Zhouping Liu <zliu@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nobody does set_orig_insn(verify => false), and I think nobody will.
Remove this argument. IIUC set_orig_insn(verify => false) was needed
to single-step without xol area.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Now that we have uprobe_dup_mmap() we can fold uprobe_reset_state()
into the new hook and remove it. mmput()->uprobe_clear_state() can't
be called before dup_mmap().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Add the new MMF_HAS_UPROBES flag. It is set by install_breakpoint()
and it is copied by dup_mmap(), uprobe_pre_sstep_notifier() checks
it to avoid the slow path if the task was never probed. Perhaps it
makes sense to check it in valid_vma(is_register => false) as well.
This needs the new dup_mmap()->uprobe_dup_mmap() hook. We can't use
uprobe_reset_state() or put MMF_HAS_UPROBES into MMF_INIT_MASK, we
need oldmm->mmap_sem to avoid the race with uprobe_register() or
mmap() from another thread.
Currently we never clear this bit, it can be false-positive after
uprobe_unregister() or uprobe_munmap() or if dup_mmap() hits the
probed VM_DONTCOPY vma. But this is fine correctness-wise and has
no effect unless the task hits the non-uprobe breakpoint.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
-EEXIST from install_breakpoint() no longer makes sense, all
callers should simply treat it as "success". Change the code
to return zero and simplify register_for_each_vma().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Once install_breakpoint() fails uprobe_mmap() "ignores" all other
uprobes and returns the error.
It was never really needed to to stop after the first error, and
in fact it was always wrong at least in -ENOTSUPP case.
Change uprobe_mmap() to ignore the errors and always return 0.
This is not what we want in the long term, but until we teach
the callers to handle the failure it would be better to remove
the pointless complications. And this doesn't look too bad, the
only "reasonable" error is ENOMEM but in this case the caller
should be oom-killed in the likely case or the system has more
serious problems.
However it makes sense to stop if fatal_signal_pending() == T.
In particular this helps if the task was oom-killed.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
1. Kill dup_mmap()->uprobe_mmap(), it was only needed to calculate
new_mm->uprobes_state.count removed by the previous patch.
If the forking process has a pending uprobe (int3) in vma, it will
be copied by copy_page_range(), note that it checks vma->anon_vma
so "Don't copy ptes" is not possible after install_breakpoint()
which does anon_vma_prepare().
2. Remove is_swbp_at_addr() and "int count" in uprobe_mmap(). Again,
this was needed for uprobes_state.count.
As a side effect this fixes the bug pointed out by Srikar,
this code lacked the necessary put_uprobe().
3. uprobe_munmap() becomes a nop after the previous patch. Remove the
meaningless code but do not remove the helper, we will need it.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
uprobes_state->count is only needed to avoid the slow path in
uprobe_pre_sstep_notifier(). It is also checked in uprobe_munmap()
but ironically its only goal to decrement this counter. However,
it is very broken. Just some examples:
- uprobe_mmap() can race with uprobe_unregister() and wrongly
increment the counter if it hits the non-uprobe "int3". Note
that install_breakpoint() checks ->consumers first and returns
-EEXIST if it is NULL.
"atomic_sub() if error" in uprobe_mmap() looks obviously wrong
too.
- uprobe_munmap() can race with uprobe_register() and wrongly
decrement the counter by the same reason.
- Suppose an appication tries to increase the mmapped area via
sys_mremap(). vma_adjust() does uprobe_munmap(whole_vma) first,
this can nullify the counter temporarily and race with another
thread which can hit the bp, the application will be killed by
SIGTRAP.
- Suppose an application mmaps 2 consecutive areas in the same file
and one (or both) of these areas has uprobes. In the likely case
mmap_region()->vma_merge() suceeds. Like above, this leads to
uprobe_munmap/uprobe_mmap from vma_merge()->vma_adjust() but then
mmap_region() does another uprobe_mmap(resulting_vma) and doubles
the counter.
This patch only removes this counter and fixes the compile errors,
then we will try to cleanup the changed code and add something else
instead.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
by the time we get here (after we pass cleanup_ret) uprobe is always is
set. If it is NULL we leave very early in the code.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Since read_opcode() reads from the referenced page and doesnt modify
the page contents nor the page attributes, there is no need to lock
the page.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Pull timer fixes from Thomas Gleixner:
"Mostly small fixes for the fallout of the timekeeping overhaul in 3.6
along with stable fixes to address an accumulation problem and missing
sanity checks for RTC readouts and user space provided values."
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Avoid making adjustments if we haven't accumulated anything
time: Avoid potential shift overflow with large shift values
time: Fix casting issue in timekeeping_forward_now
time: Ensure we normalize the timekeeper in tk_xtime_add
time: Improve sanity checking of timekeeping inputs
The function graph has a test to check if the frame pointer is
corrupted, which can happen with various options of gcc with mcount.
But this is not an issue with -mfentry as -mfentry does not need nor use
frame pointers for function graph tracing.
Link: http://lkml.kernel.org/r/20120807194059.773895870@goodmis.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Thanks to Andi Kleen, gcc 4.6.0 now supports -mfentry for x86
(and hopefully soon for other archs). What this does is to have
the function profiler start at the beginning of the function
instead of after the stack is set up. As plain -pg (mcount) is
called after the stack is set up, and in some cases can have issues
with the function graph tracer. It also requires frame pointers to
be enabled.
The -mfentry now calls __fentry__ at the beginning of the function.
This allows for compiling without frame pointers and even has the
ability to access parameters if needed.
If the architecture and the compiler both support -mfentry then
use that instead.
Link: http://lkml.kernel.org/r/20120807194059.392617243@goodmis.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If update_wall_time() is called and the current offset isn't large
enough to accumulate, avoid re-calling timekeeping_adjust which may
change the clock freq and can cause 1ns inconsistencies with
CLOCK_REALTIME_COARSE/CLOCK_MONOTONIC_COARSE.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1345595449-34965-5-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Andreas Schwab noticed that the 1 << tk->shift could overflow if the
shift value was greater than 30, since 1 would be a 32bit long on
32bit architectures. This issue was introduced by 1e75fa8be (time:
Condense timekeeper.xtime into xtime_sec)
Use 1ULL instead to ensure we don't overflow on the shift.
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1345595449-34965-4-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
arch_gettimeoffset returns a u32 value which when shifted by tk->shift
can overflow. This issue was introduced with 1e75fa8be (time: Condense
timekeeper.xtime into xtime_sec)
Cast it to u64 first.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1345595449-34965-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Andreas noticed problems with resume on specific hardware after commit
1e75fa8b (time: Condense timekeeper.xtime into xtime_sec) combined
with commit b44d50dca (time: Fix casting issue in tk_set_xtime and
tk_xtime_add)
After some digging I realized we aren't normalizing the timekeeper
after the add. Add the missing normalize call.
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1345595449-34965-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull audit-tree fixes from Miklos Szeredi:
"The audit subsystem maintainers (Al and Eric) are not responding to
repeated resends. Eric did ack them a while ago, but no response
since then. So I'm sending these directly to you."
* 'audit-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
audit: clean up refcounting in audit-tree
audit: fix refcounting in audit-tree
audit: don't free_chunk() after fsnotify_add_mark()
It seems commit 4a9d4b024a ("switch fput to task_work_add") re-
introduced the problem addressed in 944be0b224 ("close_files(): add
scheduling point")
If a server process with a lot of files (say 2 million tcp sockets) is
killed, we can spend a lot of time in task_work_run() and trigger a soft
lockup.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=843640
If mmap_region()->uprobe_mmap() fails, unmap_and_free_vma path
does unmap_region() but does not remove the soon-to-be-freed vma
from rb tree. Actually there are more problems but this is how
William noticed this bug.
Perhaps we could do do_munmap() + return in this case, but in
fact it is simply wrong to abort if uprobe_mmap() fails. Until
at least we move the !UPROBE_COPY_INSN code from
install_breakpoint() to uprobe_register().
For example, uprobe_mmap()->install_breakpoint() can fail if the
probed insn is not supported (remember, uprobe_register()
succeeds if nobody mmaps inode/offset), mmap() should not fail
in this case.
dup_mmap()->uprobe_mmap() is wrong too by the same reason,
fork() can race with uprobe_register() and fail for no reason if
it wins the race and does install_breakpoint() first.
And, if nothing else, both mmap_region() and dup_mmap() return
success if uprobe_mmap() fails. Change them to ignore the error
code from uprobe_mmap().
Reported-and-tested-by: William Cohen <wcohen@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org> # v3.5
Cc: Anton Arapov <anton@redhat.com>
Cc: William Cohen <wcohen@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20120819171042.GB26957@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
. Fix include order for bison/flex-generated C files, from Ben Hutchings
. Build fixes and documentation corrections from David Ahern
. Group parsing support, from Jiri Olsa
. UI/gtk refactorings and improvements from Namhyung Kim
. NULL deref fix for perf script, from Namhyung Kim
. Assorted cleanups from Robert Richter
. Let O= makes handle relative paths, from Steven Rostedt
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=0a2X
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
* Fix include order for bison/flex-generated C files, from Ben Hutchings
* Build fixes and documentation corrections from David Ahern
* Group parsing support, from Jiri Olsa
* UI/gtk refactorings and improvements from Namhyung Kim
* NULL deref fix for perf script, from Namhyung Kim
* Assorted cleanups from Robert Richter
* Let O= makes handle relative paths, from Steven Rostedt
* perf script python fixes, from Feng Tang.
* Improve 'perf lock' error message when the needed tracepoints
are not present, from David Ahern.
* Initial bash completion support, from Frederic Weisbecker
* Allow building without libelf, from Namhyung Kim.
* Support DWARF CFI based unwind to have callchains when %bp
based unwinding is not possible, from Jiri Olsa.
* Symbol resolution fixes, while fixing support PPC64 files with an .opt ELF
section was the end goal, several fixes for code that handles all
architectures and cleanups are included, from Cody Schafer.
* Add a description for the JIT interface, from Andi Kleen.
* Assorted fixes for Documentation and build in 32 bit, from Robert Richter
* Add support for non-tracepoint events in perf script python, from Feng Tang
* Cache the libtraceevent event_format associated to each evsel early, so that we
avoid relookups, i.e. calling pevent_find_event repeatedly when processing
tracepoint events.
[ This is to reduce the surface contact with libtraceevents and make clear what
is that the perf tools needs from that lib: so far parsing the common and per
event fields. ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull ftrace updates from Steve Rostedt:
" This patch series extends ftrace function tracing utility to be
more dynamic for its users. It allows for data passing to the callback
functions, as well as reading regs as if a breakpoint were to trigger
at function entry.
The main goal of this patch series was to allow kprobes to use ftrace
as an optimized probe point when a probe is placed on an ftrace nop.
With lots of help from Masami Hiramatsu, and going through lots of
iterations, we finally came up with a good solution. "
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull scheduler fixes from Ingo Molnar.
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix migration thread runtime bogosity
sched,rt: fix isolated CPUs leaving root_task_group indefinitely throttled
sched,cgroup: Fix up task_groups list
sched: fix divide by zero at {thread_group,task}_times
sched, cgroup: Reduce rq->lock hold times for large cgroup hierarchies
Merge alpha architecture update from Michael Cree:
"The Alpha Maintainer, Matt Turner, is currently unavailable, so I have
collected up patches that have been posted to the linux-alpha mailing
list over the last couple of months, and are forwarding them to you in
the hope that you are prepared to accept them via me.
The patches by Al Viro and myself I have been running against kernels
for two months now so have had quite a bit of testing. All except one
patch were intended for the 3.5 kernel but because of Matt's
unavailability never got forwarded to you."
* emailed patches from Michael Cree <mcree@orcon.net.nz>: (9 commits)
alpha: Fix fall-out from disintegrating asm/system.h
Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts
alpha: fix fpu.h usage in userspace
alpha/mm/fault.c: Port OOM changes to do_page_fault
alpha: take kernel_execve() out of entry.S
alpha: take a bunch of syscalls into osf_sys.c
alpha: Use new generic strncpy_from_user() and strnlen_user()
alpha: Wire up cross memory attach syscalls
alpha: Don't export SOCK_NONBLOCK to user space.
New helper: current_thread_info(). Allows to do a bunch of odd syscalls
in C. While we are at it, there had never been a reason to do
osf_getpriority() in assembler. We also get "namespace"-aware (read:
consistent with getuid(2), etc.) behaviour from getx?id() syscalls now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
syscall_get_nr can return -1 in the case that the task is not executing
a system call.
This patch fixes perf_syscall_{enter,exit} to check that the syscall
number is valid before using it as an index into a bitmap.
Link: http://lkml.kernel.org/r/1345137254-7377-1-git-send-email-will.deacon@arm.com
Cc: Jason Baron <jbaron@redhat.com>
Cc: Wade Farnsworth <wade_farnsworth@mentor.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Unexpected behavior could occur if the time is set to a value large
enough to overflow a 64bit ktime_t (which is something larger then the
year 2262).
Also unexpected behavior could occur if large negative offsets are
injected via adjtimex.
So this patch improves the sanity check timekeeping inputs by
improving the timespec_valid() check, and then makes better use of
timespec_valid() to make sure we don't set the time to an invalid
negative value or one that overflows ktime_t.
Note: This does not protect from setting the time close to overflowing
ktime_t and then letting natural accumulation cause the overflow.
Reported-by: CAI Qian <caiqian@redhat.com>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Zhouping Liu <zliu@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1344454580-17031-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Drop the initial reference by fsnotify_init_mark early instead of
audit_tree_freeing_mark() at destroy time.
In the cases we destroy the mark before we drop the initial reference we need to
get rid of the get_mark that balances the put_mark in audit_tree_freeing_mark().
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Refcounting of fsnotify_mark in audit tree is broken. E.g:
refcount
create_chunk
alloc_chunk 1
fsnotify_add_mark 2
untag_chunk
fsnotify_get_mark 3
fsnotify_destroy_mark
audit_tree_freeing_mark 2
fsnotify_put_mark 1
fsnotify_put_mark 0
via destroy_list
fsnotify_mark_destroy -1
This was reported by various people as triggering Oops when stopping auditd.
We could just remove the put_mark from audit_tree_freeing_mark() but that would
break freeing via inode destruction. So this patch simply omits a put_mark
after calling destroy_mark or adds a get_mark before.
The additional get_mark is necessary where there's no other put_mark after
fsnotify_destroy_mark() since it assumes that the caller is holding a reference
(or the inode is keeping the mark pinned, not the case here AFAICS).
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reported-by: Valentin Avram <aval13@gmail.com>
Reported-by: Peter Moody <pmoody@google.com>
Acked-by: Eric Paris <eparis@redhat.com>
CC: stable@vger.kernel.org
Don't do free_chunk() after fsnotify_add_mark(). That one does a delayed unref
via the destroy list and this results in use-after-free.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Eric Paris <eparis@redhat.com>
CC: stable@vger.kernel.org
Make stop scheduler class do the same accounting as other classes,
Migration threads can be caught in the act while doing exec balancing,
leading to the below due to use of unmaintained ->se.exec_start. The
load that triggered this particular instance was an apparently out of
control heavily threaded application that does system monitoring in
what equated to an exec bomb, with one of the VERY frequently migrated
tasks being ps.
%CPU PID USER CMD
99.3 45 root [migration/10]
97.7 53 root [migration/12]
97.0 57 root [migration/13]
90.1 49 root [migration/11]
89.6 65 root [migration/15]
88.7 17 root [migration/3]
80.4 37 root [migration/8]
78.1 41 root [migration/9]
44.2 13 root [migration/2]
Signed-off-by: Mike Galbraith <mgalbraith@suse.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344051854.6739.19.camel@marge.simpson.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Root task group bandwidth replenishment must service all CPUs, regardless of
where the timer was last started, and regardless of the isolation mechanism,
lest 'Quoth the Raven, "Nevermore"' become rt scheduling policy.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344326558.6968.25.camel@marge.simpson.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
With multiple instances of task_groups, for_each_rt_rq() is a noop,
no task groups having been added to the rt.c list instance. This
renders __enable/disable_runtime() and print_rt_stats() noop, the
user (non) visible effect being that rt task groups are missing in
/proc/sched_debug.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: stable@kernel.org # v3.3+
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344308413.6846.7.camel@marge.simpson.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
