The SDCA module have hard dependency to compile on ACPI, it can only be
selected if ACPI is also enabled.
The SDCA header provides inline prototypes for other modules to compile in
case SND_SOC_SDCA is not enabled.
Fixes: 845cb1ddf1 ("ASoC: Intel: Kconfig: select SND_SOC_SDCA by SND_SOC_ACPI_INTEL_SDCA_QUIRKS")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411070806.UhCRpZok-lkp@intel.com/
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241107100204.24952-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the function sma1307_dai_hw_params_amp, the variable
'ret' has not been assigned a value, so the logical judgement
is invalid, thus fix it.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://patch.msgid.link/20241108011617.2284-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add STM32MP25 support for STM32 I2S.
On STM32MP25 the I2S driver does not manage I2S kernel clock rate
by choosing its parent clock, depending on audio stream rate.
The driver requests a rate change on I2S kernel clock instead.
It tries to set the higher possible rate, which is a multiple of
the audio stream rate and which gives an accuracy of at least 1000 ppm.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20241107144712.1305638-3-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add STM32MP25 support for STM32 SAI.
On STM32MP25 the SAI driver does not manage SAI kernel clock rate
by chosing its parent clock, dependending on audio stream rate.
The driver requests a rate change on SAI kernel clock instead.
This rate change is performed with the following guidelines:
- Chose highest rate multiple of the audio stream
(Try to get clock accuracy within 1000 ppm)
- Ensure clock rate compatibility between SAI sub-blocks A&B
and between instances sharing the same flexgen.
Use clk_rate_exclusive API to fulfill this requirement.
The STM32 SAI peripheral does not support the DMA burst mode
on STM32MP25. Add a field in compatible structure to manage DMA
burst support capability.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20241107155143.1340523-3-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A moderately large pile of small changes here, split fairly evenly
between fixes and ID additions/quirks and all of it driver specific.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmctPVAACgkQJNaLcl1U
h9B2XQf/b3oVgw6qNlLq1Ljimy9C1fzsvN75ScCu2K8u9q0+tq8yYBI9sh5u2lXw
Y+sdxjXki0VMWhbElQVwvRNt96bhMnmLv4wSMOOlAlwwSfS/8Wt3waqtzvynsdTa
z9mTyD+DsXzebd4Ici2aCPS7dV0AdfgtcdvE5f3TXjdQZNzjgKzKAUKd5vbQdq6g
bKQF4f3kf2JohAroSSk+JwXa/yaqOsBTErOzYv0Q06PLH4LE2Rv4J5PMU01MOfbb
6k37TV5jXbjUh7ZRlhr/St6/IkiGZFwDKHzugbOw/jlXURgf8IIpI7xhxaCxDpHL
PpgvaPj0u5n8LAUlKqjzrnW5YQ/rTQ==
=JukL
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.12-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.12
A moderately large pile of small changes here, split fairly evenly
between fixes and ID additions/quirks and all of it driver specific.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The PROBE_INFO (ext_manifest type 3) is not used by the kernel, but
at every tiem the firmware is loaded the following is printed in
info level (user visible):
unknown sof_ext_man header type 3 size 0x30
The type is known, but it is not handled, the print is misleading.
Write the size of the optional payload of SOF_IPC4_MOD_INIT_INSTANCE
message to extension param_size-bits.
The previous IPC4 version does not set these bits that should indicate
the size of the optional payload (struct sof_ipc4_probe_cfg). The old
firmware side component code works well without these bits, but when
the probes are converted to use the generic module API, this does not
work anymore.
Fixes: f562359306 ("ASoC: SOF: IPC4: probes: Implement IPC4 ops for probes client device")
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20241107132840.17386-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the function ux500_msp_drv_probe, the 'int' type cast
in front of the PTR_ERR() macro is redundant, thus remove
it.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://patch.msgid.link/20241107075440.2770-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hda_dai_suspend() was added to handle paused stream during system
suspend. But as a side effect, it also ends up cleaning up the DMA
data for those streams that were prepared but not triggered before a
system suspend. Since these streams will not receive the prepare
callback after resuming, we need to preserve the DMA data during suspend.
So, add the check to handle only those streams that are in the paused
state to avoid losing the DMA data for all other streams.
Link: https://github.com/thesofproject/linux/issues/5080
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20241107134957.25160-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch checks if div is less than or equal to zero (div <= 0). If
div is zero or negative, the function returns -EINVAL, ensuring the
division operation is safe to perform.
Signed-off-by: Luo Yifan <luoyifan@cmss.chinamobile.com>
Reviewed-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20241107015936.211902-1-luoyifan@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch checks if div is less than or equal to zero (div <= 0). If
div is zero or negative, the function returns -EINVAL, ensuring the
division operation (*prate / div) is safe to perform.
Signed-off-by: Luo Yifan <luoyifan@cmss.chinamobile.com>
Link: https://patch.msgid.link/20241106014654.206860-1-luoyifan@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Another model of Thinkpad E14 Gen 6 (21M4)
needs a quirk entry for the dmic to be detected.
Signed-off-by: Markus Petri <mp@mpetri.org>
Link: https://patch.msgid.link/20241107094020.1050935-1-mp@localhost
Signed-off-by: Mark Brown <broonie@kernel.org>
It has been reported that the DMA memory allocation for firmware download
can fail after extended period of uptime on systems with relatively small
amount of RAM when the system memory becomes fragmented.
The issue primarily happens when the system is waking up from system
suspend, swap might not be available and the MM system cannot move things
around to allow for successful allocation.
If the IMR boot is not supported then for each DSP boot we would need to
allocate the DMA buffer for firmware transfer, which can increase the
chances of the issue to be hit.
This patch adds support for allocating the DMA buffers once at first boot
time and keep it until the system is shut down, rebooted or the drivers
re-loaded and makes this as the default operation.
With persistent_cl_buffer module parameter the persistent Code Loader
DMA buffer can be disabled to fall back to on demand allocation.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20241107121440.1472-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HDA specification states that the SDnLVI (Last Valid Index) must be at
least 1 (two BDLE entry).
Update the debug prints as well to provide better information.
While the LVI=0 worked so far without issues, it is better to align with
the specification to avoid unforeseen issues with FW loading.
Notes:
- The LVI > 0 rules is valid and honored for audio use cases
- LVI == 0 is used with software controlled (SPIB) transfers only for
firmware and library loading, which is permitted by the hardware
- This is not spelled out in the specification and it is better to avoid
cases
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241107121532.3241-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Every time when the firmware is loaded we see the following printed in
info level:
unknown sof_ext_man header type 3 size 0x30
This is the PROBE_INFO element, which is not parsed, but it is not
something that we should treat as surprise, aka unknown type.
Add an empty case with a debug print to 'handle' this ext_manifest type and
silence the confusing print in kernel log.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20241107120306.30680-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Fix the ld.lld: error: undefined symbol: sdca_device_quirk_match issue
when CONFIG_SND_SOC_SDCA=m and CONFIG_SND_SOC_ACPI_INTEL_SDCA_QUIRKS=y.
According to DA7212 HW manual, the codec's PLL input divider can operate
with MCLK range from 2MHz to 50MHz but current driver only set the
minimum supported MCLK frequency to 5MHz. That cause 11.025kHz audio
which is corresponding to MCLK of 2.8224MHz (11.025kHz * 256) unable to
play in case audio-simple-card is used.
Signed-off-by: Hao Bui <hao.bui.yg@renesas.com>
Co-developed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241106081826.1211088-27-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When audio stream is closing, audio frequency is set to 0 by ALSA but
codec driver DA7213 does not handle properly in this case. This patch
adds checking of 0Hz frequency to da7213_set_component_sysclk() and avoid
unnecessary PLL settings.
Signed-off-by: Hao Bui <hao.bui.yg@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241106081826.1211088-26-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return directly the value of the regcache_sync() in
da7213_runtime_resume(). In case of any failures this will inform the
runtime resume process.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241106081826.1211088-24-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On the Renesas RZ/G3S SMARC Carrier II board having a DA7212 codec (using
da7213 driver) connected to one SSIF-2 available on the Renesas RZ/G3S SoC
it has been discovered that using the runtime PM API for suspend/resume
(as will be proposed in the following commits) leads to the codec not
being propertly initialized after resume. This is because w/o
max_register populated to regmap_config the regcache_rbtree_sync()
breaks on base_reg > max condition and the regcache_sync_block() call is
skipped.
Fixes: ef5c2eba24 ("ASoC: codecs: Add da7213 codec")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241106081826.1211088-23-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Xiaomi Book Pro 14 2022 (MIA2210-AD) requires a quirk entry for its
internal microphone to be enabled.
This is likely due to similar reasons as seen previously on Redmi Book
14/15 Pro 2022 models (since they likely came with similar firmware):
- commit dcff8b7ca9 ("ASoC: amd: yc: Add Xiaomi Redmi Book Pro 15 2022
into DMI table")
- commit c1dd6bf619 ("ASoC: amd: yc: Add Xiaomi Redmi Book Pro 14 2022
into DMI table")
A quirk would likely be needed for Xiaomi Book Pro 15 2022 models, too.
However, I do not have such device on hand so I will leave it for now.
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Link: https://patch.msgid.link/20241106024052.15748-1-jeffbai@aosc.io
Signed-off-by: Mark Brown <broonie@kernel.org>
SND_SOC_SDCA can't be optional when SND_SOC_ACPI_INTEL_SDCA_QUIRKS is
selected. IS_REACHABLE can prevent the link error. However it is not
suitable for this case. When CONFIG_SND_SOC_ACPI_INTEL_SDCA_QUIRKS is
Y and CONFIG_SND_SOC_SDCA is M, the SDCA helpers will be empty and
return false. But we need the helpers to do their jobs whenSND_SOC_SDCA
is M.
IOW, the SDCA library is not optional for Intel platforms where the
SDCA_QUIRK is selected.
Also, make SND_SOC_SDCA invisible. SND_SOC_SDCA should be selected if
a device supports SDCA. User should not unselect it.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411021722.DiX1Y5sf-lkp@intel.com/
Suggested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241106055810.10123-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SND_SOC_ACPI_INTEL_MATCH relies on ACPI functions. It will not work
if ACPI is not selected.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241106055810.10123-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
runtime is not used as seen with W=1 :
sound/core/compress_offload.c: In function ‘snd_compr_poll’:
sound/core/compress_offload.c:409:35: error: variable ‘runtime’ set but not used [-Werror=unused-but-set-variable]
409 | struct snd_compr_runtime *runtime;
| ^~~~~~~
Instead of dropping the runtime, use it in the function in place of
stream->runtime
Fixes: 04177158cf ("ALSA: compress_offload: introduce accel operation mode")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20241106075312.15601-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from wangweidong.a@awinic.com:
Add the awinic,aw88081 property to support the aw88081 chip.
The driver is for amplifiers aw88081 of Awinic Technology
Corporation. The awinic AW88081 is an I2S/TDM input,
high efficiency digital Smart K audio amplifier
Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:
This patch series refactors the SoundWire dai link init logic for Intel
and AMD generic SoundWire machine driver and also updates the stream_name
in dai_links structure.
Link: https://github.com/thesofproject/linux/pull/5218
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
rtd has own ID, but it is naming "num" for it. The naming is confusable.
This patch rename it to "id".
And many functions request both "rtd" and its "id" as function parameter,
but rtd itself has rtd->id. This patch cleanup it.
And, Qcom driver want to use irregular rtd ID because of its topology,
and thus, soc-core need irregular calculation. I'm not sure why only Qcom
needs such calculation, but this patch also cleanup it.
But I guess we want to cleanup is not soc-core but Qcom side (?)
Add missing quirks for some new Dell laptops using cs42l43's speaker
outputs.
Signed-off-by: Deep Harsora <deep_harsora@dell.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20241105111057.182076-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In case of error when requesting ctrl_chan DMA channel, ctrl_chan is not
null. So the release of the dma channel leads to the following issue:
[ 4.879000] st,stm32-spdifrx 500d0000.audio-controller:
dma_request_slave_channel error -19
[ 4.888975] Unable to handle kernel NULL pointer dereference
at virtual address 000000000000003d
[...]
[ 5.096577] Call trace:
[ 5.099099] dma_release_channel+0x24/0x100
[ 5.103235] stm32_spdifrx_remove+0x24/0x60 [snd_soc_stm32_spdifrx]
[ 5.109494] stm32_spdifrx_probe+0x320/0x4c4 [snd_soc_stm32_spdifrx]
To avoid this issue, release channel only if the pointer is valid.
Fixes: 794df9448e ("ASoC: stm32: spdifrx: manage rebind issue")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20241105140242.527279-1-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add OF device ID entry for SM8750 sound card with its own model name,
used to load proper Audioreach topology file. The sound card is
compatible with SM8450 and newer family.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241101165159.370619-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On i.MX95, the MQS module in Always-on (AON) domain only can
be accessed by System Controller Management Interface (SCMI)
MISC Protocol. So define a specific regmap_config for the case.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20241025062935.1071408-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix an issue detected by the Smatch tool:
sound/soc/bcm/bcm63xx-pcm-whistler.c:264 i2s_dma_isr()
error: uninitialized symbol 'val_1'.
sound/soc/bcm/bcm63xx-pcm-whistler.c:264 i2s_dma_isr()
error: uninitialized symbol 'val_2'.
These errors were triggered because the variables 'val_1' and 'val_2'
could remain uninitialized if 'offlevel' is zero, meaning the loop
that assigns values to them does not execute. In this case,
'dma_addr_next' would use uninitialized data, potentially leading
to undefined behavior.
To resolve this, a conditional update for 'dma_addr_next' is added,
ensuring it is assigned only when 'val_1' and 'val_2' are read.
A new boolean variable 'val_read' flags when the values have been
retrieved, setting 'dma_addr_next' only if valid data is available.
This solution prevents the use of uninitialized data, maintaining
defined behavior for 'dma_addr_next' in all cases, and aligns with
expected usage of I2S RX descriptor data.
Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com>
Link: https://patch.msgid.link/20241102123630.25446-1-surajsonawane0215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An atomicity violation occurs when the validity of the variables
da7219->clk_src and da7219->mclk_rate is being assessed. Since the entire
assessment is not protected by a lock, the da7219 variable might still be
in flux during the assessment, rendering this check invalid.
To fix this issue, we recommend adding a lock before the block
if ((da7219->clk_src == clk_id) && (da7219->mclk_rate == freq)) so that
the legitimacy check for da7219->clk_src and da7219->mclk_rate is
protected by the lock, ensuring the validity of the check.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs
to extract function pairs that can be concurrently executed, and then
analyzes the instructions in the paired functions to identify possible
concurrency bugs including data races and atomicity violations.
Fixes: 6d817c0e9f ("ASoC: codecs: Add da7219 codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Link: https://patch.msgid.link/20240930101216.23723-1-chenqiuji666@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Qualcomm X1E laptops have only two speakers. Regardless whether
this sound card driver is suitable for them (we could re-use one for
some older SoC), we should set reasonable channel map depending on the
number of channels, not always 4-speaker setup.
This change is necessary for bringing audio support on Lenovo Thinkpad
T14s with Qualcomm X1E78100 and only two speakers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241023124152.130706-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
It seems that many webcams have buggy firmware and don't expose the
mic capture volume with the proper resolution. We have workarounds in
mixer.c, but judging from the numbers, those can be better managed as
global quirk flags.
Link: https://patch.msgid.link/20241105120220.5740-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There's no need to free/re-request the interrupt on system suspend.
PCI core takes care, using functions like pci_restore_msi_state().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/1b7e109b-eb69-4542-8022-4ac8f9116474@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If amdtp_stream_init() fails in amdtp_tscm_init(), the latter returns zero,
though it's supposed to return error code, which is checked inside
init_stream() in file tascam-stream.c.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 47faeea25e ("ALSA: firewire-tascam: add data block processing layer")
Signed-off-by: Murad Masimov <m.masimov@maxima.ru>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241101185517.1819-1-m.masimov@maxima.ru
The legacy rawmidi tries to enumerate all possible UMP groups
belonging to the UMP endpoint. But currently it shows all 16 ports
when the UMP endpoint is configured with static blocks, although most
of them may be unused.
There was already a fix for the sequencer client side to ignore such
groups in the commit 3bfd7c0ba1 ("ALSA: seq: ump: Skip useless ports
for static blocks"), and this commit is a similar fix for UMP
rawmidi devices; it adds simply the check for the validity of each
group that has been already parsed. (Note that the group info was
moved to snd_ump_endpoint.groups[] by the commit 0642a3c5ca
("ALSA: ump: Update substream name from assigned FB names")).
Link: https://patch.msgid.link/20241104100735.16127-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
some functions had parameter like below
xxx(..., rtd, ..., id);
This "id" is rtd->id. We don't need to have "id" on each functions
because we can get it from "rtd". Let's cleanup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87plnqb84p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
qcom/qdsp6 want to use irregular rtd->id because of its topology.
Current code is calculating it at soc_init_pcm_runtime() which calls
soc_new_pcm(), and it doesn't save it to rtd->id.
Let's calculate and save it to rtd at snd_soc_add_pcm_runtime()
which create rtd and connect related components.
But, this feature should be implemented by using "dai_link" instead
of "component". Add FIXME as comment.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87r086b84w.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now rtd->num is renamed to rtd->id. Let's switch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/87wmhyb85l.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rtd has "num". It sounds/looks like size of rtd or something,
but it will be mainly used at snd_pcm_new() as "device index".
This naming is confusable. Let's rename it to "id"
Some drivers are using rtd->num, so let's keep it so far, and remove
it if all user was switched.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87zfmub85z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver is for amplifiers aw88081 of Awinic Technology
Corporation. The awinic AW88081 is an I2S/TDM input,
high efficiency digital Smart K audio amplifier
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Reviewed-by: anish kumar <yesanishhere@gmail.com>
Link: https://patch.msgid.link/20241024090324.131731-3-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For sof stack, dai_link->stream name will be assigned.
For legacy(No DSP enabled) stack, dai_link->stream name should be updated
explicitly. Update the stream_name in dai_link structure.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241101020802.1103181-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add 'no_pcm' as parameter for asoc_sdw_init_dai_link() so that
same function can be used for SOF and legacy(No DSP) stack.
Pass 'no_pcm' as 1 for Intel and AMD SOF based machine drivers.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241101020802.1103181-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC CODEC driver masks the IRQs whilst entering and exiting
system suspend to avoid issues where the IRQ handler can run but PM
runtime is disabled. However, as the IRQs could also be used from
other parts of the driver, it would be better to move this handling to
the MFD level.
Remove the handling from the ASoC driver and move it to the MFD
driver. Whilst moving also ensure the IRQs are all masked at the device
level before powering down the device, as per hardware recommendations.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org.>
Link: https://lore.kernel.org/r/20241014095202.828194-1-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
Commit 4f61c8fe35 ("ALSA: hda/conexant: Mute speakers at suspend /
shutdown") mutes speakers on system shutdown or whenever HDA controller
is suspended by PM; this however interacts badly with Thinkpad's ACPI
firmware behavior which uses beeps to signal various events (enter/leave
suspend or hibernation, AC power connect/disconnect, low battery, etc.);
now those beeps are either muted altogether (for suspend/hibernate/
shutdown related events) or work more or less randomly (eg. AC
plug/unplug is only audible when you are playing music at the moment,
because HDA device is likely in suspend mode otherwise).
Since the original bug report mentioned in 4f61c8fe35 complained about
Lenovo's Thinkpad laptop - revert this commit altogether.
Fixes: 4f61c8fe35 ("ALSA: hda/conexant: Mute speakers at suspend / shutdown")
Signed-off-by: Jarosław Janik <jaroslaw.janik@gmail.com>
Link: https://patch.msgid.link/20241030171813.18941-2-jaroslaw.janik@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Prabhakar <prabhakar.csengg@gmail.com>:
This patch series aims to rename "sh" to "renesas", along with this
the references to this path have been updated.
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below sound to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
On the way do a few whitespace changes to make indention consistent.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20241029073748.508077-2-u.kleine-koenig@baylibre.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The WD19 family of docks has the same audio chipset as the WD15. This
change enables jack detection on the WD19.
We don't need the dell_dock_mixer_init quirk for the WD19. It is only
needed because of the dell_alc4020_map quirk for the WD15 in
mixer_maps.c, which disables the volume controls. Even for the WD15,
this quirk was apparently only needed when the dock firmware was not
updated.
Signed-off-by: Jan Schär <jan@jschaer.ch>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241029221249.15661-1-jan@jschaer.ch
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The biggest set of changes here is Hans' fixes and quirks for various
Baytrail based platforms with RT5640 CODECs, and there's one core fix
for a missed length assignment for __counted_by() checking. Otherwise
it's small device specific fixes, several of them in the DT bindings.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmciNo8ACgkQJNaLcl1U
h9CNfAf/bw39l2d16DVOdzq1gv4I0BUX7M/wTsLRujnDCv8F7qZn3BhhPEeEiLDP
3wa8MzwcnXGI7rM5kzPKUERI352N7FzWUpSz6r7QtszPpttzx8HSxcHuuU68msSo
oqrUmEqA+1sFuDwsMMm85uUpeHHFQtgEhtMxMafz9VxWhTqSQCfIoM62pAns2Xdq
X3mSaovGIofWXszMjzf7tWrWfAAnzgvYjmOYNd7QwIpi/HZL9iAxw/orbLW6AZCm
ZnrhiGxf5ZZeeaiZhEzdH7iktM1+WpvLihl1PUD8JcgCHW3CJud/OqtpXV+AeyHm
p7dI0bb71g0RJ08pt+i64wxS6HA+Qg==
=I/0i
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.12-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.12
The biggest set of changes here is Hans' fixes and quirks for various
Baytrail based platforms with RT5640 CODECs, and there's one core fix
for a missed length assignment for __counted_by() checking. Otherwise
it's small device specific fixes, several of them in the DT bindings.
The "sound/soc/sh" directory has been renamed to "sound/soc/renesas".
Update the comment in audio-graph-card2.c to reflect the new file path
for better accuracy.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20241025150511.722040-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the "sh" folder to "renesas" to better reflect the Renesas-specific
drivers.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20241025150511.722040-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
struct adau1373_platform_data" was not being used by any platform.
Hence, drop it and move to firmware based support. All the
configurations quirks present in the platform_data are now supported as
firmware properties.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20241028-adau1373-shutdown-v2-3-647f56bbd182@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On a system with wcd937x, rxmacro and Qualcomm audio DSP, which is pretty
common set of devices on Qualcomm platforms, and due to the order of how
DAPM widgets are powered on (they are sorted), there is a small time window
when wcd937x chip is online and expects the flow of incoming data but
rxmacro is not yet online. When wcd937x is programmed to receive data
via AUX port then its AUX PDM watchdog is enabled in
wcd937x_codec_enable_aux_pa(). If due to some reasons the rxmacro and
soundwire machinery are delayed to start streaming data, then there is
a chance for this AUX PDM watchdog to reset the wcd937x codec. Such event
is not logged as a message and only wcd937x IRQ counter is increased
however there could be a lot of other reasons for that IRQ.
There is a similar opportunity for such delay during DAPM widgets power
down sequence.
If wcd937x codec reset happens on the start of the playback, then there
will be no sound and if such reset happens at the end of a playback then
it may generate additional clicks and pops noises.
On qrb4210 RB2 board without any debugging bits the wcd937x resets are
sometimes observed at the end of a playback though not always.
With some debugging messages or with some tracing enabled the AUX PDM
watchdog resets the wcd937x codec at the start of a playback and there
is no sound output at all.
In this patch:
- TIMEOUT_SEL bit in PDM_WD_CTL2 register is set to increase the watchdog
reset delay to 100ms which eliminates the AUX PDM watchdog IRQs on
qrb4210 RB2 board completely and decreases the number of unwanted clicks
noises;
- HOLD_OFF bit postpones triggering such watchdog IRQ till wcd937x codec
reset which usually happens at the end of a playback. This allows to
actually output some sound in case of debugging.
Cc: Adam Skladowski <a39.skl@gmail.com>
Cc: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Cc: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20241022033132.787416-3-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The wcd937x supports also AUX input but the control that sets correct
soundwire port for this is missing. This control is required for audio
playback, for instance, on qrb4210 RB2 board as well as on other
SoCs.
Reported-by: Adam Skladowski <a39.skl@gmail.com>
Reported-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Suggested-by: Adam Skladowski <a39.skl@gmail.com>
Suggested-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20241022033132.787416-2-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of of_match_ptr() is incorrect here and just causes
a warning:
sound/soc/codecs/cs42l84.c:1084:34: error: unused variable 'cs42l84_of_match' [-Werror,-Wunused-const-variable]
Fixes: 250304a0fb ("ASoC: cs42l84: Add new codec driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20241029092404.3874040-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This also includes a change to the capture level as they differ with
this device, as well as additional values for prefader channels.
Acked-by: Olivia Mackintosh <livvy@base.nu>
Signed-off-by: Sarah Grant <s@srd.tw>
Link: https://patch.msgid.link/20241025163927.12662-1-s@srd.tw
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Infinix ZERO BOOK 13 has a 2+2 speaker system which isn't probed correctly.
This patch adds a quirk with the proper pin connections.
Also The mic in this laptop suffers too high gain resulting in mostly
fan noise being recorded,
This patch Also limit mic boost.
HW Probe for device; https://linux-hardware.org/?probe=a2e892c47b
Test: All 4 speaker works, Mic has low noise.
Signed-off-by: Piyush Raj Chouhan <piyushchouhan1598@gmail.com>
Link: https://patch.msgid.link/20241028155516.15552-1-piyuschouhan1598@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The widgets array in the snd_soc_dapm_widget_list has a __counted_by
attribute attached to it, which points to the num_widgets variable. This
attribute is used in bounds checking, and if it is not set before the
array is filled, then the bounds sanitizer will issue a warning or a
kernel panic if CONFIG_UBSAN_TRAP is set.
This patch sets the size of the widgets list calculated with
list_for_each as the initial value for num_widgets as it is used for
allocating memory for the array. It is updated with the actual number of
added elements after the array is filled.
Signed-off-by: Aleksei Vetrov <vvvvvv@google.com>
Fixes: 80e698e2df ("ASoC: soc-dapm: Annotate struct snd_soc_dapm_widget_list with __counted_by")
Link: https://patch.msgid.link/20241028-soc-dapm-bounds-checker-fix-v1-1-262b0394e89e@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for the rt722 multi-function codec and the
rt1320 amplifier in the ARL board configuration.
Link 0: RT722 codec with three endpoints: Headset, Speaker, and DMIC.
Link 2: RT1320 amplifier.
Note:
The Speaker endpoint on the RT722 codec is not used.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241028072631.15536-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds a quirk to include the codec amplifier
function for this Dell SKU.
Note: In this SKU '0CF0', the RT722 codec amplifier is
excluded, and an external amplifier is used instead.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241028072631.15536-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When SKUs use the multi-function codec, which integrates
Headset, Amplifier and DMIC. The corresponding quirks provide
options to support internal amplifier/DMIC or not.
In the case of RT722, this SKU excludes the internal amplifier and
use an additional amplifier instead.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241028072631.15536-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because we designed a new version of ES8326, the configuration of
micbias needed to be modified.We tested the new driver,
on both the new version and the old one. It works well.
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20241028060529.3359-1-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The last use of devm_snd_soc_register_dai() was removed by
commit fc4cb1e15f ("ASoC: topology: Properly unregister DAI on removal")
in 2021.
Remove it, and the helper it used.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20241028021226.477909-1-linux@treblig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If devm_gpiod_get_optional() fails, we need to disable previously enabled
regulators, as done in the other error handling path of the function.
Also, gpiod_set_value_cansleep(, 1) needs to be called to undo a
potential gpiod_set_value_cansleep(, 0).
If the "reset" gpio is not defined, this additional call is just a no-op.
This behavior is the same as the one already in the .remove() function.
Fixes: 11b9cd748e ("ASoC: cs42l51: add reset management")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/a5e5f4b9fb03f46abd2c93ed94b5c395972ce0d1.1729975570.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Some old Bay Trail tablets which shipped with Android as factory OS
have the SST/LPE audio engine described by an ACPI device with a
HID (Hardware-ID) of LPE0F28 instead of 80860F28.
Add support for this. Note this uses a new sst_res_info for just
the LPE0F28 case because it has a different layout for the IO-mem ACPI
resources then the 80860F28.
An example of a tablet which needs this is the Vexia EDU ATLA 10 tablet,
which has been distributed to schools in the Spanish Andalucía region.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241025090221.52198-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
