The latest GCC 13 snapshot (13.0.1 20230129) gives the following:
```
cc1: error: cannot load plugin ./scripts/gcc-plugins/randomize_layout_plugin.so
:./scripts/gcc-plugins/randomize_layout_plugin.so: undefined symbol: tree_code_type
```
This ends up being because of https://gcc.gnu.org/git/gitweb.cgi?p=gcc.git;h=b0241ce6e37031
upstream in GCC which changes the visibility of some types used by the kernel's
plugin infrastructure like tree_code_type.
After discussion with the GCC folks, we found that the kernel needs to be building
plugins with the same flags used to build GCC - and GCC defaults to gnu++17
right now. The minimum GCC version needed to build the kernel is GCC 5.1
and GCC 5.1 already defaults to gnu++14 anyway, so just drop the flag, as
all GCCs that could be used to build GCC already default to an acceptable
version which was >= the version we forced via flags until now.
Bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108634
Signed-off-by: Sam James <sam@gentoo.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230201230009.2252783-1-sam@gentoo.org
Commit 61f60bac8c ("gcc-plugins: Change all version strings match
kernel") broke parallel builds.
Instead of adding the dependency between GCC plugins and utsrelease.h,
let's use KERNELVERSION, which does not require any build artifact.
Another reason why I want to avoid utsrelease.h is because it depends
on CONFIG_LOCALVERSION(_AUTO) and localversion* files.
(include/generated/utsrelease.h depends on include/config/kernel.release,
which is generated by scripts/setlocalversion)
I want to keep host tools independent of the kernel configuration.
There is no good reason to rebuild GCC plugins just because of
CONFIG_LOCALVERSION being changed.
We just want to associate the plugin versions with the kernel source
version. KERNELVERSION should be enough for our purpose.
Fixes: 61f60bac8c ("gcc-plugins: Change all version strings match kernel")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-mm/202205230239.EZxeZ3Fv-lkp@intel.com
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220524135541.1453693-1-masahiroy@kernel.org
It's not meaningful for the GCC plugins to track their versions separately
from the rest of the kernel. Switch all versions to the kernel version.
Fix mismatched indenting while we're at it.
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
To enable Clang randstruct support, move the structure layout
randomization seed generation out of scripts/gcc-plugins/ into
scripts/basic/ so it happens early enough that it can be used by either
compiler implementation. The gcc-plugin still builds its own header file,
but now does so from the common "randstruct.seed" file.
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220503205503.3054173-6-keescook@chromium.org
Linus reported a build error due to the GCC plugin incompatibility
when the compiler is upgraded. [1]
GCC plugins are tied to a particular GCC version. So, they must be
rebuilt when the compiler is upgraded.
This seems to be a long-standing flaw since the initial support of
GCC plugins.
Extend commit 8b59cd81dc ("kbuild: ensure full rebuild when the
compiler is updated"), so that GCC plugins are covered by the
compiler upgrade detection.
[1]: https://lore.kernel.org/lkml/CAHk-=wieoN5ttOy7SnsGwZv+Fni3R6m-Ut=oxih6bbZ28G+4dw@mail.gmail.com/
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Fedora Rawhide has started including gcc 11,and the g++ compiler
throws a wobbly when it hits scripts/gcc-plugins:
HOSTCXX scripts/gcc-plugins/latent_entropy_plugin.so
In file included from /usr/include/c++/11/type_traits:35,
from /usr/lib/gcc/x86_64-redhat-linux/11/plugin/include/system.h:244,
from /usr/lib/gcc/x86_64-redhat-linux/11/plugin/include/gcc-plugin.h:28,
from scripts/gcc-plugins/gcc-common.h:7,
from scripts/gcc-plugins/latent_entropy_plugin.c:78:
/usr/include/c++/11/bits/c++0x_warning.h:32:2: error: #error This file requires compiler and library support for the ISO
C++ 2011 standard. This support must be enabled with the -std=c++11 or -std=gnu++11 compiler options.
32 | #error This file requires compiler and library support \
In fact, it works just fine with c++11, which has been in gcc since 4.8,
and we now require 4.9 as a minimum.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/82487.1609006918@turing-police
The host shared library rules are currently implemented in
scripts/Makefile.host, but actually GCC-plugin is the only user of
them. (The VDSO .so files are built for the target by different
build rules) Hence, they do not need to be treewide available.
Move all the relevant build rules to scripts/gcc-plugins/Makefile.
I also optimized the build steps so *.so is directly built from .c
because every upstream plugin is compiled from a single source file.
I am still keeping the multi-file plugin support, which Kees Cook
mentioned might be needed by out-of-tree plugins.
(https://lkml.org/lkml/2019/1/11/1107)
If the plugin, foo.so, is compiled from two files foo.c and foo2.c,
then you can do like follows:
foo-objs := foo.o foo2.o
Single-file plugins do not need the *-objs notation.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
This is the remnant of commit c17d6179ad ("gcc-plugins: remove unused
GCC_PLUGIN_SUBDIR").
The conditional $(if $(findstring /,$(p)),...) is always false because
none of plugins contains '/' in the file name.
Clean up the code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Remove "params.h" include, which has been dropped in GCC 10.
Remove is_a_helper() macro, which is now defined in gimple.h, as seen
when running './scripts/gcc-plugin.sh g++ g++ gcc':
In file included from <stdin>:1:
./gcc-plugins/gcc-common.h:852:13: error: redefinition of ‘static bool is_a_helper<T>::test(U*) [with U = const gimple; T = const ggoto*]’
852 | inline bool is_a_helper<const ggoto *>::test(const_gimple gs)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ./gcc-plugins/gcc-common.h:125,
from <stdin>:1:
/usr/lib/gcc/x86_64-redhat-linux/10/plugin/include/gimple.h:1037:1: note: ‘static bool is_a_helper<T>::test(U*) [with U = const gimple; T = const ggoto*]’ previously declared here
1037 | is_a_helper <const ggoto *>::test (const gimple *gs)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Add -Wno-format-diag to scripts/gcc-plugins/Makefile to avoid
meaningless warnings from error() formats used by plugins:
scripts/gcc-plugins/structleak_plugin.c: In function ‘int plugin_init(plugin_name_args*, plugin_gcc_version*)’:
scripts/gcc-plugins/structleak_plugin.c:253:12: warning: unquoted sequence of 2 consecutive punctuation characters ‘'-’ in format [-Wformat-diag]
253 | error(G_("unknown option '-fplugin-arg-%s-%s'"), plugin_name, argv[i].key);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Frédéric Pierret (fepitre) <frederic.pierret@qubes-os.org>
Link: https://lore.kernel.org/r/20200407113259.270172-1-frederic.pierret@qubes-os.org
[kees: include -Wno-format-diag for plugin builds]
Signed-off-by: Kees Cook <keescook@chromium.org>
Nobody was opposed to raising minimum GCC version to 4.8 [1]
So, we will drop GCC <= 4.7 support sooner or later.
We always use C++ compiler for building plugins for GCC >= 4.8.
This commit drops the plugin support for GCC <= 4.7 a bit earlier,
which allows us to dump lots of code.
[1] https://lkml.org/lkml/2020/1/23/545
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Add -Wall to catch more warnings for C++ host programs.
When I submitted the previous version, the 0-day bot reported
-Wc++11-compat warnings for old GCC:
HOSTCXX -fPIC scripts/gcc-plugins/latent_entropy_plugin.o
In file included from /usr/lib/gcc/x86_64-linux-gnu/4.8/plugin/include/tm.h:28:0,
from scripts/gcc-plugins/gcc-common.h:15,
from scripts/gcc-plugins/latent_entropy_plugin.c:78:
/usr/lib/gcc/x86_64-linux-gnu/4.8/plugin/include/config/elfos.h:102:21: warning: C++11 requires a space between string literal and macro [-Wc++11-compat]
fprintf ((FILE), "%s"HOST_WIDE_INT_PRINT_UNSIGNED"\n",\
^
/usr/lib/gcc/x86_64-linux-gnu/4.8/plugin/include/config/elfos.h:170:24: warning: C++11 requires a space between string literal and macro [-Wc++11-compat]
fprintf ((FILE), ","HOST_WIDE_INT_PRINT_UNSIGNED",%u\n", \
^
In file included from /usr/lib/gcc/x86_64-linux-gnu/4.8/plugin/include/tm.h:42:0,
from scripts/gcc-plugins/gcc-common.h:15,
from scripts/gcc-plugins/latent_entropy_plugin.c:78:
/usr/lib/gcc/x86_64-linux-gnu/4.8/plugin/include/defaults.h:126:24: warning: C++11 requires a space between string literal and macro [-Wc++11-compat]
fprintf ((FILE), ","HOST_WIDE_INT_PRINT_UNSIGNED",%u\n", \
^
The source of the warnings is in the plugin headers, so we have no
control of it. I just suppressed them by adding -Wno-c++11-compat to
scripts/gcc-plugins/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.
It is typically useful in scripts/Makefile because it allows Kbuild to
selectively compile host programs based on the kernel configuration.
This commit renames like follows:
always -> always-y
hostprogs-y -> hostprogs
So, scripts/Makefile will look like this:
always-$(CONFIG_BUILD_BIN2C) += ...
always-$(CONFIG_KALLSYMS) += ...
...
hostprogs := $(always-y) $(always-m)
I think this makes more sense because a host program is always a host
program, irrespective of the kernel configuration. We want to specify
which ones to compile by CONFIG options, so always-y will be handier.
The "always", "hostprogs-y", "hostprogs-m" will be kept for backward
compatibility for a while.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
GCC_PLUGIN_SUBDIR has never been used. If you really need this in
the future, please re-add it then.
For now, the code is unused. Remove.
'export HOSTLIBS' is not necessary either.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Run scripts/gcc-plugin.sh from Kconfig so that users can enable
GCC_PLUGINS only when the compiler supports building plugins.
Kconfig defines a new symbol, PLUGIN_HOSTCC. This will contain
the compiler (g++ or gcc) used for building plugins, or empty
if the plugin can not be supported at all.
This allows us to remove all ugly testing in Makefile.gcc-plugins.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kees Cook <keescook@chromium.org>
As Documentation/kbuild/kconfig-language.txt notes, 'select' should be
be used with care - it forces a lower limit of another symbol, ignoring
the dependency. Currently, KCOV can select GCC_PLUGINS even if arch
does not select HAVE_GCC_PLUGINS. This could cause the unmet direct
dependency.
Now that Kconfig can test compiler capability, let's handle this in a
more sophisticated way.
There are two ways to enable KCOV; use the compiler that natively
supports -fsanitize-coverage=trace-pc, or build the SANCOV plugin if
the compiler has ability to build GCC plugins. Hence, the correct
dependency for KCOV is:
depends on CC_HAS_SANCOV_TRACE_PC || GCC_PLUGINS
You do not need to build the SANCOV plugin if the compiler already
supports -fsanitize-coverage=trace-pc. Hence, the select should be:
select GCC_PLUGIN_SANCOV if !CC_HAS_SANCOV_TRACE_PC
With this, GCC_PLUGIN_SANCOV is selected only when necessary, so
scripts/Makefile.gcc-plugins can be cleaner.
I also cleaned up Kconfig and scripts/Makefile.kcov as well.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This randstruct plugin is modified from Brad Spengler/PaX Team's code
in the last public patch of grsecurity/PaX based on my understanding
of the code. Changes or omissions from the original code are mine and
don't reflect the original grsecurity/PaX code.
The randstruct GCC plugin randomizes the layout of selected structures
at compile time, as a probabilistic defense against attacks that need to
know the layout of structures within the kernel. This is most useful for
"in-house" kernel builds where neither the randomization seed nor other
build artifacts are made available to an attacker. While less useful for
distribution kernels (where the randomization seed must be exposed for
third party kernel module builds), it still has some value there since now
all kernel builds would need to be tracked by an attacker.
In more performance sensitive scenarios, GCC_PLUGIN_RANDSTRUCT_PERFORMANCE
can be selected to make a best effort to restrict randomization to
cacheline-sized groups of elements, and will not randomize bitfields. This
comes at the cost of reduced randomization.
Two annotations are defined,__randomize_layout and __no_randomize_layout,
which respectively tell the plugin to either randomize or not to
randomize instances of the struct in question. Follow-on patches enable
the auto-detection logic for selecting structures for randomization
that contain only function pointers. It is disabled here to assist with
bisection.
Since any randomized structs must be initialized using designated
initializers, __randomize_layout includes the __designated_init annotation
even when the plugin is disabled so that all builds will require
the needed initialization. (With the plugin enabled, annotations for
automatically chosen structures are marked as well.)
The main differences between this implemenation and grsecurity are:
- disable automatic struct selection (to be enabled in follow-up patch)
- add designated_init attribute at runtime and for manual marking
- clarify debugging output to differentiate bad cast warnings
- add whitelisting infrastructure
- support gcc 7's DECL_ALIGN and DECL_MODE changes (Laura Abbott)
- raise minimum required GCC version to 4.7
Earlier versions of this patch series were ported by Michael Leibowitz.
Signed-off-by: Kees Cook <keescook@chromium.org>
This adds support for building more complex gcc plugins that live in a
subdirectory instead of just in a single source file.
Reported-by: PaX Team <pageexec@freemail.hu>
Signed-off-by: Emese Revfy <re.emese@gmail.com>
[kees: clarified commit message]
Signed-off-by: Kees Cook <keescook@chromium.org>
There's no reason to repeat the same names in the Makefile when the .so
files have already been listed. The .o list can be generated from them.
Reported-by: PaX Team <pageexec@freemail.hu>
Signed-off-by: Emese Revfy <re.emese@gmail.com>
[kees: clarified commit message]
Signed-off-by: Kees Cook <keescook@chromium.org>
The sancov gcc plugin inserts a __sanitizer_cov_trace_pc() call
at the start of basic blocks.
This plugin is a helper plugin for the kcov feature. It supports
all gcc versions with plugin support (from gcc-4.5 on).
It is based on the gcc commit "Add fuzzing coverage support" by Dmitry Vyukov
(https://gcc.gnu.org/viewcvs/gcc?limit_changes=0&view=revision&revision=231296).
Signed-off-by: Emese Revfy <re.emese@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
Add a very simple plugin to demonstrate the GCC plugin infrastructure. This GCC
plugin computes the cyclomatic complexity of each function.
The complexity M of a function's control flow graph is defined as:
M = E - N + 2P
where
E = the number of edges
N = the number of nodes
P = the number of connected components (exit nodes).
Signed-off-by: Emese Revfy <re.emese@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
This patch allows to build the whole kernel with GCC plugins. It was ported from
grsecurity/PaX. The infrastructure supports building out-of-tree modules and
building in a separate directory. Cross-compilation is supported too.
Currently the x86, arm, arm64 and uml architectures enable plugins.
The directory of the gcc plugins is scripts/gcc-plugins. You can use a file or a directory
there. The plugins compile with these options:
* -fno-rtti: gcc is compiled with this option so the plugins must use it too
* -fno-exceptions: this is inherited from gcc too
* -fasynchronous-unwind-tables: this is inherited from gcc too
* -ggdb: it is useful for debugging a plugin (better backtrace on internal
errors)
* -Wno-narrowing: to suppress warnings from gcc headers (ipa-utils.h)
* -Wno-unused-variable: to suppress warnings from gcc headers (gcc_version
variable, plugin-version.h)
The infrastructure introduces a new Makefile target called gcc-plugins. It
supports all gcc versions from 4.5 to 6.0. The scripts/gcc-plugin.sh script
chooses the proper host compiler (gcc-4.7 can be built by either gcc or g++).
This script also checks the availability of the included headers in
scripts/gcc-plugins/gcc-common.h.
The gcc-common.h header contains frequently included headers for GCC plugins
and it has a compatibility layer for the supported gcc versions.
The gcc-generate-*-pass.h headers automatically generate the registration
structures for GIMPLE, SIMPLE_IPA, IPA and RTL passes.
Note that 'make clean' keeps the *.so files (only the distclean or mrproper
targets clean all) because they are needed for out-of-tree modules.
Based on work created by the PaX Team.
Signed-off-by: Emese Revfy <re.emese@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
