- Drop cic from the list when seen as dead.
- Fixup the locking, just use a simple spinlock.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
While executing barrrier sequence, the bar_rq which carries actual
write was accounted as normal IO on completion, while it wasn't on
queueing. This caused gendisk->in_flight to be decremented by 1 after
each barrier thus messed up statistics.
This patch makes bar_rq not accounted as normal IO. As the containing
barrier request as a whole is accounted, part of it shouldn't be.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This reverts commit 56cf6504fc.
Both Erik Mouw and Andrew Vasquez independently pinpointed this commit
as causing problems, where the slab cache for a driver is never released
(most obviously causing problems when immediately re-loading that
driver, resulting in a "kmem_cache_create: duplicate cache <xyz>"
message, but it can also cause other trouble).
James Bottomley dug into it, and reports:
"OK, here's the scoop. The problem patch adds a get of driverfs_dev in
add_disk(), but doesn't put it again until disk_release() (which occurs
on final put_disk() of the gendisk).
However, in SCSI, the driverfs_dev is the sdev_gendev. That means
there's a reference held on sdev_gendev until final disk put.
Unfortunately, we use the driver model driver_remove to trigger
del_gendisk (which removes the gendisk from visibility and decrements
the refcount), so we've introduced an unbreakable deadlock in the
reference counting with this.
I suggest simply reversing this patch at the moment. If Russell and
Jens can tell me what they're trying to do I'll see if there's another
way to do it."
so hereby the patch gets reverted, waiting for a better fix.
Cc: Jens Axboe <axboe@suse.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: James Bottomley <James.Bottomley@SteelEye.com>
Cc: Erik Mouw <erik@harddisk-recovery.com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Don't recurse back into the driver even if the unplug threshold is met,
when the driver asks for a requeue. This is both silly from a logical
point of view (requeues typically happen due to driver/hardware
shortage), and also dangerous since we could hit an endless request_fn
-> requeue -> unplug -> request_fn loop and crash on stack overrun.
Also limit blk_run_queue() to one level of recursion, similar to how
blk_start_queue() works.
This patch fixed a real problem with SLES10 and lpfc, and it could hit
any SCSI lld that returns non-zero from it's ->queuecommand() handler.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The block layer keeps a reference (driverfs_dev) to the struct
device associated with the block device, and uses it internally
for generating uevents in block_uevent.
Block device uevents include umounting the partition, which can
occur after the backing device has been removed.
Unfortunately, this reference is not counted. This means that
if the struct device is removed from the device tree, the block
layers reference will become stale.
Guard against this by holding a reference to the struct device
in add_disk(), and only drop the reference when we're releasing
the gendisk kobject - in other words when we can be sure that no
further uevents will be generated for this block device.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Jens Axboe <axboe@suse.de>
Few of the notifier_chain_register() callers use __devinitdata in the
definition of notifier_block data structure. It is incorrect as the
data structure should be available after the initializations (they do
not unregister them during initializations).
This was leading to an oops when notifier_chain_register() call is
invoked for those callback chains after initialization.
This patch fixes all such usages to _not_ have the notifier_block data
structure in the init data section.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
They were abusing the rb_color field to mark nodes which weren't currently
on the tree. Fix that to use the same method as eventpoll did -- setting
the parent pointer to point back to itself. And use the appropriate
accessor macros for setting and reading the parent.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
This patch removes the following unused EXPORT_SYMBOL's:
- elv_requeue_request
- elv_completed_request
They are only used by the block core, hence they need not be exported.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jens Axboe <axboe@suse.de>
In current code, we are re-reading cic->key after dead cic->key check.
So, in theory, it may really re-read *after* cfq_exit_queue() seted NULL.
To avoid race, we copy it to stack, then use it. With this change, I
guess gcc will assign cic->key to a register or stack, and it wouldn't
be re-readed.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Jens Axboe <axboe@suse.de>
When queue dies, we set cic->key=NULL as dead mark. So, when we
traverse a rbtree, we must check whether it's still valid key. if it
was invalidated, drop it, then restart the traversal from top.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Jens Axboe <axboe@suse.de>
On rmmod path, cfq/as waits to make sure all io-contexts was
freed. However, it's using complete(), not wait_for_completion().
I think barrier() is not enough in here. To avoid the following case,
this patch replaces barrier() with smb_wmb().
cpu0 visibility cpu1
[ioc_gnone=NULL,ioc_count=1]
ioc_gnone = &all_gone NULL,ioc_count=1
atomic_read(&ioc_count) NULL,ioc_count=1
wait_for_completion() NULL,ioc_count=0 atomic_sub_and_test()
NULL,ioc_count=0 if ( && ioc_gone)
[ioc_gone==NULL,
so doesn't call complete()]
&all_gone,ioc_count=0
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Jens Axboe <axboe@suse.de>
We currently have two implementations of this obsolete ioctl, one in
the block layer and one in the scsi code. Both of them have drawbacks.
This patch kills the scsi layer version after updating the block version
with the missing bits:
- argument checking
- use scatterlist I/O
- set number of retries based on the submitted command
This is the last user of non-S/G I/O except for the gdth driver, so
getting this in ASAP and through the scsi tree would be nie to kill
the non-S/G I/O path. Jens, what do you think about adding a check
for non-S/G I/O in the midlayer?
Thanks to Or Gerlitz for testing this patch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
This patch updates the comments to match the actual code.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
The help text says that if you select CONFIG_LBD, then it will automatically
select CONFIG_LFS. That isn't currently the case, so update the text.
- Get rid of the cruft in the help text mentioning CONFIG_LBD
- Tell unsure users to select CONFIG_LFS.
- Remove the `default n'.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The boot cmdline is parsed in parse_early_param() and
parse_args(,unknown_bootoption).
And __setup() is used in obsolete_checksetup().
start_kernel()
-> parse_args()
-> unknown_bootoption()
-> obsolete_checksetup()
If __setup()'s callback (->setup_func()) returns 1 in
obsolete_checksetup(), obsolete_checksetup() thinks a parameter was
handled.
If ->setup_func() returns 0, obsolete_checksetup() tries other
->setup_func(). If all ->setup_func() that matched a parameter returns 0,
a parameter is seted to argv_init[].
Then, when runing /sbin/init or init=app, argv_init[] is passed to the app.
If the app doesn't ignore those arguments, it will warning and exit.
This patch fixes a wrong usage of it, however fixes obvious one only.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make baby-simple the code for /proc/devices. Based on the proven design
for /proc/interrupts.
This also fixes the early-termination regression 2.6.16 introduced, as
demonstrated by:
# dd if=/proc/devices bs=1
Character devices:
1 mem
27+0 records in
27+0 records out
This should also work (but is untested) when /proc/devices >4096 bytes,
which I believe is what the original 2.6.16 rewrite fixed.
[akpm@osdl.org: cleanups, simplifications]
Signed-off-by: Joe Korty <joe.korty@ccur.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* 'cfq-merge' of git://brick.kernel.dk/data/git/linux-2.6-block:
[BLOCK] cfq-iosched: seek and async performance fixes
[PATCH] ll_rw_blk: fix 80-col offender in put_io_context()
[PATCH] cfq-iosched: small cfq_choose_req() optimization
[PATCH] [BLOCK] cfq-iosched: change cfq io context linking from list to tree
Detect whether a given process is seeky and if so disable (mostly) the
idle window if it is. We still allow just a little idle time, just enough
to allow that process to submit a new request. That is needed to maintain
fairness across priority groups.
In some cases, we could setup several async queues. This is not optimal
from a performance POV, since we want all async io in one queue to perform
good sorting on it. It also impacted sync queues, as async io got too much
slice time.
Signed-off-by: Jens Axboe <axboe@suse.de>
this is a small optimization to cfq_choose_req() in the CFQ I/O scheduler
(this function is a semi-often invoked candidate in an oprofile log):
by using a bit mask variable, we can use a simple switch() to check
the various cases instead of having to query two variables for each check.
Benefit: 251 vs. 285 bytes footprint of cfq_choose_req().
Also, common case 0 (no request wrapping) is now checked first in code.
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Jens Axboe <axboe@suse.de>
On setups with many disks, we spend a considerable amount of time
looking up the process-disk mapping on each queue of io. Testing with
a NULL based block driver, this costs 40-50% reduction in throughput
for 1000 disks.
Signed-off-by: Jens Axboe <axboe@suse.de>
* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block:
[PATCH] Don't make debugfs depend on DEBUG_KERNEL
[PATCH] Fix blktrace compile with sysfs not defined
[PATCH] unused label in drivers/block/cciss.
[BLOCK] increase size of disk stat counters
[PATCH] blk_execute_rq_nowait-speedup
[PATCH] ide-cd: quiet down GPCMD_READ_CDVD_CAPACITY failure
[BLOCK] ll_rw_blk: kmalloc -> kzalloc conversion
[PATCH] kzalloc() conversion in drivers/block
[PATCH] update max_sectors documentation
This flag should be set for a virtual device iff it is set for all underlying
devices.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The kernel's representation of the disk statistics uses the type unsigned
which is 32b on both 32b and 64b platforms. Unfortunately, most system
tools that work with these numbers that are exported in /proc/diskstats
including iostat read these numbers into unsigned longs. This works fine
on 32b platforms and when the number of IO transactions are small on 64b
platforms. However, when the numbers wrap on 64b platforms & you read the
numbers into unsigned longs, and compare the numbers to previous readings,
then you get an unsigned representation of a negative number. This looks
like a very large 64b number & gives you bizarre readouts in iostat:
ilc4: Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util
ilc4: sda 5.50 0.00 143.96 0.00 307496983987862656.00 0.00 153748491993931328.00 0.00 2136028725038430.00 7.94 55.12 5.59 80.42
Though fixing iostat in user space is possible, and a quick survey
indicates that several other similar tools also use unsigned longs when
processing /proc/diskstats. Therefore, it seems like a better approach
would be to extend the length of the disk_stats structure on 64b
architectures to 64b. The following patch does that. It should not affect
the operation on 32b platforms.
Signed-off-by: Ben Woodard <woodard@redhat.com>
Cc: Rick Lindsley <ricklind@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jens Axboe <axboe@suse.de>
Both elv_add_request() and generic_unplug_device() grab the queue lock
and disable interrupts, do that locally and use the __ variants.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jens Axboe <axboe@suse.de>
Add blkcnt_t as the type of inode.i_blocks. This enables you to make the size
of blkcnt_t either 4 bytes or 8 bytes on 32 bits architecture with CONFIG_LSF.
- CONFIG_LSF
Add new configuration parameter.
- blkcnt_t
On h8300, i386, mips, powerpc, s390 and sh that define sector_t,
blkcnt_t is defined as u64 if CONFIG_LSF is enabled; otherwise it is
defined as unsigned long.
On other architectures, it is defined as unsigned long.
- inode.i_blocks
Change the type from sector_t to blkcnt_t.
Signed-off-by: Takashi Sato <sho@tnes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Modify well over a dozen mempool users to call mempool_create_slab_pool()
rather than calling mempool_create() with extra arguments, saving about 30
lines of code and increasing readability.
Signed-off-by: Matthew Dobson <colpatch@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Convert the kobj_map code to use a mutex instead of a semaphore. It
converts the single two users as well, genhd.c and char_dev.c.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We don't need to pin ->key down; ->cfqq->cfqd will do that for us.
Incidentally, that stops the leak we had - that reference was never
dropped.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If somebody does a hash lookup for cfq_queue while ioprio of an async queue
is elevated, they shouldn't end up stuck with lowered ioprio when we go back.
Fix is to use ->org_ioprio{,class} in hash lookups.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The low level PCI DMA mapping functions should handle it in most cases.
This should fix problems with depleting the DMA zone early. The old
code used precious GFP_DMA memory in many cases where it was not needed.
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
During testing of SLES10, we encountered a hang in the CFQ io scheduler.
Turns out the deferred slice expiry logic is buggy, so remove that for
now. We could be left with an idle queue that would never wake up. So
kill that logic, always expire immediately. Also fix a potential timer
race condition.
Patch looks bigger than it is, because it moves a function.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
q->ordcolor must only be flipped on initial queueing of a hardbarrier
request.
Constructing ordered sequence and requeueing used to pass through
__elv_add_request() which flips q->ordcolor when it sees a barrier
request.
This patch separates out elv_insert() from __elv_add_request() and uses
elv_insert() when constructing ordered sequence and requeueing.
elv_insert() inserts the given request at the specified position and
does nothing else.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When issuing an SG_IO ioctl through sd that resulted in an unrecoverable
error, a nearly infinite retry loop was discovered. This is due to the
fact that the block layer SG_IO code is not setting up rq->retries. This
patch also fixes up the sg_scsi_ioctl path.
Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
q->ordcolor must not be flipped on SOFTBARRIER.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Previously, if a fs request which was being drained failed and got
requeued, blk_do_ordered() didn't allow it to be reissued, which causes
queue stall. This patch makes blk_do_ordered() use the sequence of each
request to determine whether a request can be issued or not. This fixes
the bug and simplifies code.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
percpu_data blindly allocates bootmem memory to store NR_CPUS instances of
cpudata, instead of allocating memory only for possible cpus.
As a preparation for changing that, we need to convert various 0 -> NR_CPUS
loops to use for_each_cpu().
(The above only applies to users of asm-generic/percpu.h. powerpc has gone it
alone and is presently only allocating memory for present CPUs, so it's
currently corrupting memory).
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Jens Axboe <axboe@suse.de>
Cc: Anton Blanchard <anton@samba.org>
Acked-by: William Irwin <wli@holomorphy.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Record I/O timing statistics
The start time is added to struct dm_io, an existing structure allocated
privately internally within dm and attached to each incoming bio.
We export disk_round_stats() from block/ll_rw_blk.c instead of creating a
private clone.
Signed-off-by: Jun'ichi "Nick" Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This makes XFS barrier mounts succeed on my SCSI system.
Signed-off-by: Tetsuo Takata <takatatt@intellilink.co.jp>
Signed-off-by: Jens Axboe <axboe@suse.de>
Jens has decided that allowing the default scheduler to be a module is
a bug, and should not be allowed under kconfig. However, I find that
scenario useful for debugging, and wish for the kernel to be able to
handle this situation without OOPSing, if I enable such an option in
the .config directly. This patch dynamically checks for the presence
of the compiled-in default, and falls back to no-op, emitting a
suitable error message, when the default is not available
Tested for a range of boot options on 2.6.16-rc1-mm2.
Signed-off-by: Nate Diller <nate.diller@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
My previous default iosched patch did a poor job dealing with the
'elevator=' boot-time option. The old behavior falls back to the
compiled-in default if the requested one is not registered at boot
time. This patch dynamically evaluates which default
to use, and emits a suitable error message when the requested scheduler
is not available. It also does the 'as' -> 'anticipatory' conversion
before elevator registration, which along with a modified registration
function, allows it to correctly indicate which default scheduler is
in use.
Tested for a range of boot options on 2.6.16-rc1-mm2.
Signed-off-by: Nate Diller <nate.diller@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
A Christoph suggested that the /proc/devices file be converted to use the
seq_file interface. This patch does that.
I've obxerved one or two installation that had sufficiently large sans that
they overran the 4k limit on /proc/devices.
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If ordered tag isn't supported, request ordering for barrier
sequencing is performed by queue draining, which basically hangs the
request queue until elv_completed_request() reports completion of all
previous fs requests.
The condition check in elv_completed_request() was only performed for
fs requests. If a special request is queued between the last
to-be-drained request and the barrier sequence, draining is never
completed and the queue is stalled forever.
This patch moves the end-of-draining condition check such that it's
performed for all requests.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Move capable() from sched.h to capability.h;
- Use <linux/capability.h> where capable() is used
(in include/, block/, ipc/, kernel/, a few drivers/,
mm/, security/, & sound/;
many more drivers/ to go)
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Request completion can be a quite heavy process, since it needs to
iterate through the entire request and complete the bio's it holds.
This patch adds blk_complete_request() which moves this processing
into a dedicated block softirq.
Signed-off-by: Jens Axboe <axboe@suse.de>
It's a broken interface, it's done way too late. And apparently it triggers
slab problems in recent kernels as well (most likely after the generic dispatch
code was merged). So kill it, ide-cd is the only user of it.
Signed-off-by: Jens Axboe <axboe@suse.de>
HDIO_GETGEO is implemented in most block drivers, and all of them have to
duplicate the code to copy the structure to userspace, as well as getting
the start sector. This patch moves that to common code [1] and adds a
->getgeo method to fill out the raw kernel hd_geometry structure. For many
drivers this means ->ioctl can go away now.
[1] the s390 block drivers are odd in this respect. xpram sets ->start
to 4 always which seems more than odd, and the dasd driver shifts
the start offset around, probably because of it's non-standard
sector size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@suse.de>
Cc: <mike.miller@hp.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Sanitize some s390 Kconfig options. We have ARCH_S390, ARCH_S390X,
ARCH_S390_31, 64BIT, S390_SUPPORT and COMPAT. Replace these 6 options by
S390, 64BIT and COMPAT.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Reimplement handling of barrier requests.
* Flexible handling to deal with various capabilities of
target devices.
* Retry support for falling back.
* Tagged queues which don't support ordered tag can do ordered.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
Separate out bio initialization part from __make_request. It
will be used by the following blk_ordered_reimpl.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
add @uptodate argument to end_that_request_last() and @error
to rq_end_io_fn(). there's no generic way to pass error code
to request completion function, making generic error handling
of non-fs request difficult (rq->errors is driver-specific and
each driver uses it differently). this patch adds @uptodate
to end_that_request_last() and @error to rq_end_io_fn().
for fs requests, this doesn't really matter, so just using the
same uptodate argument used in the last call to
end_that_request_first() should suffice. imho, this can also
help the generic command-carrying request jens is working on.
Signed-off-by: tejun heo <htejun@gmail.com>
Signed-Off-By: Jens Axboe <axboe@suse.de>
the patch below marks various read-only variables in block/* as const,
so that gcc can optimize the use of them; eg gcc will replace the use by
the value directly now and will even remove the memory usage of these.
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Jens Axboe <axboe@suse.de>
Originally from: Nick Piggin <nickpiggin@yahoo.com.au>
Move current_io_context out of the get_request fastpth. Also try to
streamline a few other things in this area.
Signed-off-by: Jens Axboe <axboe@suse.de>
Unlike other ioscheds, as-iosched handles alias by chaing them using
rq->queuelist. As aliased requests are very rare in the first place,
this complicates merge/dispatch handling without meaningful
performance improvement. This patch updates as-iosched to dump
aliased requests into dispatch queue as other ioscheds do.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
Leave the overloaded "hotplug" word to susbsystems which are handling
real devices. The driver core does not "plug" anything, it just exports
the state to userspace and generates events.
Signed-off-by: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is just a basic cleanup. No change in functionality.
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- export __blk_put_request and blk_execute_rq_nowait
needed for async REQ_BLOCK_PC requests
- seperate max_hw_sectors and max_sectors for block/scsi_ioctl.c and
SG_IO bio.c helpers per Jens's last comments. Since block/scsi_ioctl.c SG_IO was
already testing against max_sectors and SCSI-ml was setting max_sectors and
max_hw_sectors to the same value this does not change any scsi SG_IO behavior. It only
prepares ll_rw_blk.c, scsi_ioctl.c and bio.c for when SCSI-ml begins to set
a valid max_hw_sectors for all LLDs. Today if a LLD does not set it
SCSI-ml sets it to a safe default and some LLDs set it to a artificial low
value to overcome memory and feedback issues.
Note: Since we now cap max_sectors to BLK_DEF_MAX_SECTORS, which is 1024,
drivers that used to call blk_queue_max_sectors with a large value of
max_sectors will now see the fs requests capped to BLK_DEF_MAX_SECTORS.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
To send async requests we need these two functions exported.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Kill the arq->state poison statement in as_add_request(), it can trigger
for perfectly valid code that just reuses a request after io completion
instead of freeing it and allocating a new one. We probably should
introduce a blk_init_request() to start from scratch, but for now just
kill it as we will be removing the as specific poisoning soon.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Some leftover comments referring to drivers/block that are now block/.
They don't add any information we don't already have, so kill them.
Signed-off-by: Coywolf Qi Hunt <qiyong@fc-cn.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
With generic dispatch queue update, implicit former/latter request
handling using rq->queuelist.prev/next doesn't work as expected
anymore. Also, the only iosched dependent on this feature was
noop-iosched and it has been reimplemented to have its own
latter/former methods. This patch removes implicit former/latter
handling.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
The original implementation directly used dispatch queue. As new
generic dispatch queue imposes stricter rules over ioscheds and
dispatch queue usage, this direct use becomes somewhat problematic.
This patch reimplements noop-iosched such that it complies to generic
iosched model better. Request merging with q->last_merge and
rq->queuelist.prev/next work again now.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de
When cfq slice expires, remainder of slice is calculated and stored in
cfqq->slice_left. Current code calculates the opposite of remainder -
how many jiffies the cfqq has used past slice end. This patch fixes
the bug.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
elv_iosched_store doesn't terminate string passed from userspace if
it's too long. Also, if the written length is zero (probably not
possible), it accesses elevator_name[-1]. This patch fixes both bugs.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
This patch adds request_queue->nr_sorted which keeps the number of
requests in the iosched and implement elv_drain_elevator which
performs forced dispatching. elv_drain_elevator checks whether
iosched actually dispatches all requests it has and prints error
message if it doesn't. As buggy forced dispatching can result in
wrong barrier operations, I think this extra check is worthwhile.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
cfq forced dispatching might not return all requests on the queue.
This bug can hang elevator switchinig and corrupt request ordering
during flush sequence.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
In addition to the first patch, which is probably goodness, I found the
cause of my panic - applying this patch fixes it and now I am booting.
If the chosen_elevator[] is not found, fall back to noop.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jens Axboe <axboe@suse.de>
I got a panic in the elevator code, backtrace :
Unable to handle kernel NULL pointer dereference at virtual address 00000060
..
EIP is at elevator_put+0x0/0x30 (null elevator_type passed)
..
elevator_init+0x38
blk_init_queu_node+0xc9
floppy_init+0xdb
do_initcalls+0x23
init+0x10a
init+0x0
Clearly if the kmalloc here fails, e->elevator_type is not yet set; this
appears to be the correct fix, but I think I probably hit the second case
due to a race condition. Someone more familiar with the elevator code
should look at this more closely until I can determine if I can reproduce.
Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jens Axboe <axboe@suse.de>
With the recent reorg of the io scheduler selection, it unfortunately
became possible to select an io scheduler to be the default even if it
wasn't builtin. Fix this by requiring the default scheduler to be
builtin.
Signed-off-by: Jens Axboe <axboe@suse.de>
drivers/block/ is right now a mix of core and driver parts. Lets move
the core parts to a new top level directory. Al will move the fs/
related block parts to block/ next.
Signed-off-by: Jens Axboe <axboe@suse.de>
