Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-02 02:01:29 +00:00
Code Issues Packages Projects Releases Wiki Activity

mv643xx_eth: Merge drivers/net/mv643xx_eth.h into mv643xx_eth.c

Browse Source 
Since drivers/net/mv643xx_eth.c is the only user of
drivers/net/mv643xx_eth.h, there's not much use in having the header
file as a separate file, so merge the header into the driver.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
This commit is contained in:
Lennert Buytenhek 2007-10-19 16:03:46 +02:00 committed by Dale Farnsworth
parent b45d9147f1
commit fbd6a754f7
2 changed files with 557 additions and 568 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

558
drivers/net/mv643xx_eth.c
View File

@ -43,14 +43,570 @@
#include <linux/ethtool.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/mii.h>
#include <linux/mv643xx_eth.h>
#include <asm/io.h>
#include <asm/types.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/delay.h>
#include "mv643xx_eth.h"
#include <asm/dma-mapping.h>
/* Checksum offload for Tx works for most packets, but
* fails if previous packet sent did not use hw csum
*/
#define MV643XX_CHECKSUM_OFFLOAD_TX
#define MV643XX_NAPI
#define MV643XX_TX_FAST_REFILL
#undef MV643XX_COAL
/*
* Number of RX / TX descriptors on RX / TX rings.
* Note that allocating RX descriptors is done by allocating the RX
* ring AND a preallocated RX buffers (skb's) for each descriptor.
* The TX descriptors only allocates the TX descriptors ring,
* with no pre allocated TX buffers (skb's are allocated by higher layers.
*/
/* Default TX ring size is 1000 descriptors */
#define MV643XX_DEFAULT_TX_QUEUE_SIZE 1000
/* Default RX ring size is 400 descriptors */
#define MV643XX_DEFAULT_RX_QUEUE_SIZE 400
#define MV643XX_TX_COAL 100
#ifdef MV643XX_COAL
#define MV643XX_RX_COAL 100
#endif
#ifdef MV643XX_CHECKSUM_OFFLOAD_TX
#define MAX_DESCS_PER_SKB (MAX_SKB_FRAGS + 1)
#else
#define MAX_DESCS_PER_SKB 1
#endif
#define ETH_VLAN_HLEN 4
#define ETH_FCS_LEN 4
#define ETH_HW_IP_ALIGN 2 /* hw aligns IP header */
#define ETH_WRAPPER_LEN (ETH_HW_IP_ALIGN + ETH_HLEN + \
ETH_VLAN_HLEN + ETH_FCS_LEN)
#define ETH_RX_SKB_SIZE (dev->mtu + ETH_WRAPPER_LEN + \
dma_get_cache_alignment())
/*
* Registers shared between all ports.
*/
#define PHY_ADDR_REG 0x0000
#define SMI_REG 0x0004
/*
* Per-port registers.
*/
#define PORT_CONFIG_REG(p) (0x0400 + ((p) << 10))
#define PORT_CONFIG_EXTEND_REG(p) (0x0404 + ((p) << 10))
#define MAC_ADDR_LOW(p) (0x0414 + ((p) << 10))
#define MAC_ADDR_HIGH(p) (0x0418 + ((p) << 10))
#define SDMA_CONFIG_REG(p) (0x041c + ((p) << 10))
#define PORT_SERIAL_CONTROL_REG(p) (0x043c + ((p) << 10))
#define PORT_STATUS_REG(p) (0x0444 + ((p) << 10))
#define TRANSMIT_QUEUE_COMMAND_REG(p) (0x0448 + ((p) << 10))
#define MAXIMUM_TRANSMIT_UNIT(p) (0x0458 + ((p) << 10))
#define INTERRUPT_CAUSE_REG(p) (0x0460 + ((p) << 10))
#define INTERRUPT_CAUSE_EXTEND_REG(p) (0x0464 + ((p) << 10))
#define INTERRUPT_MASK_REG(p) (0x0468 + ((p) << 10))
#define INTERRUPT_EXTEND_MASK_REG(p) (0x046c + ((p) << 10))
#define TX_FIFO_URGENT_THRESHOLD_REG(p) (0x0474 + ((p) << 10))
#define RX_CURRENT_QUEUE_DESC_PTR_0(p) (0x060c + ((p) << 10))
#define RECEIVE_QUEUE_COMMAND_REG(p) (0x0680 + ((p) << 10))
#define TX_CURRENT_QUEUE_DESC_PTR_0(p) (0x06c0 + ((p) << 10))
#define MIB_COUNTERS_BASE(p) (0x1000 + ((p) << 7))
#define DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(p) (0x1400 + ((p) << 10))
#define DA_FILTER_OTHER_MULTICAST_TABLE_BASE(p) (0x1500 + ((p) << 10))
#define DA_FILTER_UNICAST_TABLE_BASE(p) (0x1600 + ((p) << 10))
/* These macros describe Ethernet Port configuration reg (Px_cR) bits */
#define UNICAST_NORMAL_MODE (0 << 0)
#define UNICAST_PROMISCUOUS_MODE (1 << 0)
#define DEFAULT_RX_QUEUE(queue) ((queue) << 1)
#define DEFAULT_RX_ARP_QUEUE(queue) ((queue) << 4)
#define RECEIVE_BC_IF_NOT_IP_OR_ARP (0 << 7)
#define REJECT_BC_IF_NOT_IP_OR_ARP (1 << 7)
#define RECEIVE_BC_IF_IP (0 << 8)
#define REJECT_BC_IF_IP (1 << 8)
#define RECEIVE_BC_IF_ARP (0 << 9)
#define REJECT_BC_IF_ARP (1 << 9)
#define TX_AM_NO_UPDATE_ERROR_SUMMARY (1 << 12)
#define CAPTURE_TCP_FRAMES_DIS (0 << 14)
#define CAPTURE_TCP_FRAMES_EN (1 << 14)
#define CAPTURE_UDP_FRAMES_DIS (0 << 15)
#define CAPTURE_UDP_FRAMES_EN (1 << 15)
#define DEFAULT_RX_TCP_QUEUE(queue) ((queue) << 16)
#define DEFAULT_RX_UDP_QUEUE(queue) ((queue) << 19)
#define DEFAULT_RX_BPDU_QUEUE(queue) ((queue) << 22)
#define PORT_CONFIG_DEFAULT_VALUE \
UNICAST_NORMAL_MODE | \
DEFAULT_RX_QUEUE(0) | \
DEFAULT_RX_ARP_QUEUE(0) | \
RECEIVE_BC_IF_NOT_IP_OR_ARP | \
RECEIVE_BC_IF_IP | \
RECEIVE_BC_IF_ARP | \
CAPTURE_TCP_FRAMES_DIS | \
CAPTURE_UDP_FRAMES_DIS | \
DEFAULT_RX_TCP_QUEUE(0) | \
DEFAULT_RX_UDP_QUEUE(0) | \
DEFAULT_RX_BPDU_QUEUE(0)
/* These macros describe Ethernet Port configuration extend reg (Px_cXR) bits*/
#define CLASSIFY_EN (1 << 0)
#define SPAN_BPDU_PACKETS_AS_NORMAL (0 << 1)
#define SPAN_BPDU_PACKETS_TO_RX_QUEUE_7 (1 << 1)
#define PARTITION_DISABLE (0 << 2)
#define PARTITION_ENABLE (1 << 2)
#define PORT_CONFIG_EXTEND_DEFAULT_VALUE \
SPAN_BPDU_PACKETS_AS_NORMAL | \
PARTITION_DISABLE
/* These macros describe Ethernet Port Sdma configuration reg (SDCR) bits */
#define RIFB (1 << 0)
#define RX_BURST_SIZE_1_64BIT (0 << 1)
#define RX_BURST_SIZE_2_64BIT (1 << 1)
#define RX_BURST_SIZE_4_64BIT (2 << 1)
#define RX_BURST_SIZE_8_64BIT (3 << 1)
#define RX_BURST_SIZE_16_64BIT (4 << 1)
#define BLM_RX_NO_SWAP (1 << 4)
#define BLM_RX_BYTE_SWAP (0 << 4)
#define BLM_TX_NO_SWAP (1 << 5)
#define BLM_TX_BYTE_SWAP (0 << 5)
#define DESCRIPTORS_BYTE_SWAP (1 << 6)
#define DESCRIPTORS_NO_SWAP (0 << 6)
#define IPG_INT_RX(value) (((value) & 0x3fff) << 8)
#define TX_BURST_SIZE_1_64BIT (0 << 22)
#define TX_BURST_SIZE_2_64BIT (1 << 22)
#define TX_BURST_SIZE_4_64BIT (2 << 22)
#define TX_BURST_SIZE_8_64BIT (3 << 22)
#define TX_BURST_SIZE_16_64BIT (4 << 22)
#if defined(__BIG_ENDIAN)
#define PORT_SDMA_CONFIG_DEFAULT_VALUE \
RX_BURST_SIZE_4_64BIT | \
IPG_INT_RX(0) | \
TX_BURST_SIZE_4_64BIT
#elif defined(__LITTLE_ENDIAN)
#define PORT_SDMA_CONFIG_DEFAULT_VALUE \
RX_BURST_SIZE_4_64BIT | \
BLM_RX_NO_SWAP | \
BLM_TX_NO_SWAP | \
IPG_INT_RX(0) | \
TX_BURST_SIZE_4_64BIT
#else
#error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined
#endif
/* These macros describe Ethernet Port serial control reg (PSCR) bits */
#define SERIAL_PORT_DISABLE (0 << 0)
#define SERIAL_PORT_ENABLE (1 << 0)
#define DO_NOT_FORCE_LINK_PASS (0 << 1)
#define FORCE_LINK_PASS (1 << 1)
#define ENABLE_AUTO_NEG_FOR_DUPLX (0 << 2)
#define DISABLE_AUTO_NEG_FOR_DUPLX (1 << 2)
#define ENABLE_AUTO_NEG_FOR_FLOW_CTRL (0 << 3)
#define DISABLE_AUTO_NEG_FOR_FLOW_CTRL (1 << 3)
#define ADV_NO_FLOW_CTRL (0 << 4)
#define ADV_SYMMETRIC_FLOW_CTRL (1 << 4)
#define FORCE_FC_MODE_NO_PAUSE_DIS_TX (0 << 5)
#define FORCE_FC_MODE_TX_PAUSE_DIS (1 << 5)
#define FORCE_BP_MODE_NO_JAM (0 << 7)
#define FORCE_BP_MODE_JAM_TX (1 << 7)
#define FORCE_BP_MODE_JAM_TX_ON_RX_ERR (2 << 7)
#define SERIAL_PORT_CONTROL_RESERVED (1 << 9)
#define FORCE_LINK_FAIL (0 << 10)
#define DO_NOT_FORCE_LINK_FAIL (1 << 10)
#define RETRANSMIT_16_ATTEMPTS (0 << 11)
#define RETRANSMIT_FOREVER (1 << 11)
#define ENABLE_AUTO_NEG_SPEED_GMII (0 << 13)
#define DISABLE_AUTO_NEG_SPEED_GMII (1 << 13)
#define DTE_ADV_0 (0 << 14)
#define DTE_ADV_1 (1 << 14)
#define DISABLE_AUTO_NEG_BYPASS (0 << 15)
#define ENABLE_AUTO_NEG_BYPASS (1 << 15)
#define AUTO_NEG_NO_CHANGE (0 << 16)
#define RESTART_AUTO_NEG (1 << 16)
#define MAX_RX_PACKET_1518BYTE (0 << 17)
#define MAX_RX_PACKET_1522BYTE (1 << 17)
#define MAX_RX_PACKET_1552BYTE (2 << 17)
#define MAX_RX_PACKET_9022BYTE (3 << 17)
#define MAX_RX_PACKET_9192BYTE (4 << 17)
#define MAX_RX_PACKET_9700BYTE (5 << 17)
#define MAX_RX_PACKET_MASK (7 << 17)
#define CLR_EXT_LOOPBACK (0 << 20)
#define SET_EXT_LOOPBACK (1 << 20)
#define SET_HALF_DUPLEX_MODE (0 << 21)
#define SET_FULL_DUPLEX_MODE (1 << 21)
#define DISABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX (0 << 22)
#define ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX (1 << 22)
#define SET_GMII_SPEED_TO_10_100 (0 << 23)
#define SET_GMII_SPEED_TO_1000 (1 << 23)
#define SET_MII_SPEED_TO_10 (0 << 24)
#define SET_MII_SPEED_TO_100 (1 << 24)
#define PORT_SERIAL_CONTROL_DEFAULT_VALUE \
DO_NOT_FORCE_LINK_PASS | \
ENABLE_AUTO_NEG_FOR_DUPLX | \
DISABLE_AUTO_NEG_FOR_FLOW_CTRL | \
ADV_SYMMETRIC_FLOW_CTRL | \
FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
FORCE_BP_MODE_NO_JAM | \
(1 << 9) /* reserved */ | \
DO_NOT_FORCE_LINK_FAIL | \
RETRANSMIT_16_ATTEMPTS | \
ENABLE_AUTO_NEG_SPEED_GMII | \
DTE_ADV_0 | \
DISABLE_AUTO_NEG_BYPASS | \
AUTO_NEG_NO_CHANGE | \
MAX_RX_PACKET_9700BYTE | \
CLR_EXT_LOOPBACK | \
SET_FULL_DUPLEX_MODE | \
ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX
/* These macros describe Ethernet Serial Status reg (PSR) bits */
#define PORT_STATUS_MODE_10_BIT (1 << 0)
#define PORT_STATUS_LINK_UP (1 << 1)
#define PORT_STATUS_FULL_DUPLEX (1 << 2)
#define PORT_STATUS_FLOW_CONTROL (1 << 3)
#define PORT_STATUS_GMII_1000 (1 << 4)
#define PORT_STATUS_MII_100 (1 << 5)
/* PSR bit 6 is undocumented */
#define PORT_STATUS_TX_IN_PROGRESS (1 << 7)
#define PORT_STATUS_AUTONEG_BYPASSED (1 << 8)
#define PORT_STATUS_PARTITION (1 << 9)
#define PORT_STATUS_TX_FIFO_EMPTY (1 << 10)
/* PSR bits 11-31 are reserved */
#define PORT_DEFAULT_TRANSMIT_QUEUE_SIZE 800
#define PORT_DEFAULT_RECEIVE_QUEUE_SIZE 400
#define DESC_SIZE 64
#define ETH_RX_QUEUES_ENABLED (1 << 0) /* use only Q0 for receive */
#define ETH_TX_QUEUES_ENABLED (1 << 0) /* use only Q0 for transmit */
#define ETH_INT_CAUSE_RX_DONE (ETH_RX_QUEUES_ENABLED << 2)
#define ETH_INT_CAUSE_RX_ERROR (ETH_RX_QUEUES_ENABLED << 9)
#define ETH_INT_CAUSE_RX (ETH_INT_CAUSE_RX_DONE | ETH_INT_CAUSE_RX_ERROR)
#define ETH_INT_CAUSE_EXT 0x00000002
#define ETH_INT_UNMASK_ALL (ETH_INT_CAUSE_RX | ETH_INT_CAUSE_EXT)
#define ETH_INT_CAUSE_TX_DONE (ETH_TX_QUEUES_ENABLED << 0)
#define ETH_INT_CAUSE_TX_ERROR (ETH_TX_QUEUES_ENABLED << 8)
#define ETH_INT_CAUSE_TX (ETH_INT_CAUSE_TX_DONE | ETH_INT_CAUSE_TX_ERROR)
#define ETH_INT_CAUSE_PHY 0x00010000
#define ETH_INT_CAUSE_STATE 0x00100000
#define ETH_INT_UNMASK_ALL_EXT (ETH_INT_CAUSE_TX | ETH_INT_CAUSE_PHY | \
ETH_INT_CAUSE_STATE)
#define ETH_INT_MASK_ALL 0x00000000
#define ETH_INT_MASK_ALL_EXT 0x00000000
#define PHY_WAIT_ITERATIONS 1000 /* 1000 iterations * 10uS = 10mS max */
#define PHY_WAIT_MICRO_SECONDS 10
/* Buffer offset from buffer pointer */
#define RX_BUF_OFFSET 0x2
/* Gigabit Ethernet Unit Global Registers */
/* MIB Counters register definitions */
#define ETH_MIB_GOOD_OCTETS_RECEIVED_LOW 0x0
#define ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH 0x4
#define ETH_MIB_BAD_OCTETS_RECEIVED 0x8
#define ETH_MIB_INTERNAL_MAC_TRANSMIT_ERR 0xc
#define ETH_MIB_GOOD_FRAMES_RECEIVED 0x10
#define ETH_MIB_BAD_FRAMES_RECEIVED 0x14
#define ETH_MIB_BROADCAST_FRAMES_RECEIVED 0x18
#define ETH_MIB_MULTICAST_FRAMES_RECEIVED 0x1c
#define ETH_MIB_FRAMES_64_OCTETS 0x20
#define ETH_MIB_FRAMES_65_TO_127_OCTETS 0x24
#define ETH_MIB_FRAMES_128_TO_255_OCTETS 0x28
#define ETH_MIB_FRAMES_256_TO_511_OCTETS 0x2c
#define ETH_MIB_FRAMES_512_TO_1023_OCTETS 0x30
#define ETH_MIB_FRAMES_1024_TO_MAX_OCTETS 0x34
#define ETH_MIB_GOOD_OCTETS_SENT_LOW 0x38
#define ETH_MIB_GOOD_OCTETS_SENT_HIGH 0x3c
#define ETH_MIB_GOOD_FRAMES_SENT 0x40
#define ETH_MIB_EXCESSIVE_COLLISION 0x44
#define ETH_MIB_MULTICAST_FRAMES_SENT 0x48
#define ETH_MIB_BROADCAST_FRAMES_SENT 0x4c
#define ETH_MIB_UNREC_MAC_CONTROL_RECEIVED 0x50
#define ETH_MIB_FC_SENT 0x54
#define ETH_MIB_GOOD_FC_RECEIVED 0x58
#define ETH_MIB_BAD_FC_RECEIVED 0x5c
#define ETH_MIB_UNDERSIZE_RECEIVED 0x60
#define ETH_MIB_FRAGMENTS_RECEIVED 0x64
#define ETH_MIB_OVERSIZE_RECEIVED 0x68
#define ETH_MIB_JABBER_RECEIVED 0x6c
#define ETH_MIB_MAC_RECEIVE_ERROR 0x70
#define ETH_MIB_BAD_CRC_EVENT 0x74
#define ETH_MIB_COLLISION 0x78
#define ETH_MIB_LATE_COLLISION 0x7c
/* Port serial status reg (PSR) */
#define ETH_INTERFACE_PCM 0x00000001
#define ETH_LINK_IS_UP 0x00000002
#define ETH_PORT_AT_FULL_DUPLEX 0x00000004
#define ETH_RX_FLOW_CTRL_ENABLED 0x00000008
#define ETH_GMII_SPEED_1000 0x00000010
#define ETH_MII_SPEED_100 0x00000020
#define ETH_TX_IN_PROGRESS 0x00000080
#define ETH_BYPASS_ACTIVE 0x00000100
#define ETH_PORT_AT_PARTITION_STATE 0x00000200
#define ETH_PORT_TX_FIFO_EMPTY 0x00000400
/* SMI reg */
#define ETH_SMI_BUSY 0x10000000 /* 0 - Write, 1 - Read */
#define ETH_SMI_READ_VALID 0x08000000 /* 0 - Write, 1 - Read */
#define ETH_SMI_OPCODE_WRITE 0 /* Completion of Read */
#define ETH_SMI_OPCODE_READ 0x04000000 /* Operation is in progress */
/* Interrupt Cause Register Bit Definitions */
/* SDMA command status fields macros */
/* Tx & Rx descriptors status */
#define ETH_ERROR_SUMMARY 0x00000001
/* Tx & Rx descriptors command */
#define ETH_BUFFER_OWNED_BY_DMA 0x80000000
/* Tx descriptors status */
#define ETH_LC_ERROR 0
#define ETH_UR_ERROR 0x00000002
#define ETH_RL_ERROR 0x00000004
#define ETH_LLC_SNAP_FORMAT 0x00000200
/* Rx descriptors status */
#define ETH_OVERRUN_ERROR 0x00000002
#define ETH_MAX_FRAME_LENGTH_ERROR 0x00000004
#define ETH_RESOURCE_ERROR 0x00000006
#define ETH_VLAN_TAGGED 0x00080000
#define ETH_BPDU_FRAME 0x00100000
#define ETH_UDP_FRAME_OVER_IP_V_4 0x00200000
#define ETH_OTHER_FRAME_TYPE 0x00400000
#define ETH_LAYER_2_IS_ETH_V_2 0x00800000
#define ETH_FRAME_TYPE_IP_V_4 0x01000000
#define ETH_FRAME_HEADER_OK 0x02000000
#define ETH_RX_LAST_DESC 0x04000000
#define ETH_RX_FIRST_DESC 0x08000000
#define ETH_UNKNOWN_DESTINATION_ADDR 0x10000000
#define ETH_RX_ENABLE_INTERRUPT 0x20000000
#define ETH_LAYER_4_CHECKSUM_OK 0x40000000
/* Rx descriptors byte count */
#define ETH_FRAME_FRAGMENTED 0x00000004
/* Tx descriptors command */
#define ETH_LAYER_4_CHECKSUM_FIRST_DESC 0x00000400
#define ETH_FRAME_SET_TO_VLAN 0x00008000
#define ETH_UDP_FRAME 0x00010000
#define ETH_GEN_TCP_UDP_CHECKSUM 0x00020000
#define ETH_GEN_IP_V_4_CHECKSUM 0x00040000
#define ETH_ZERO_PADDING 0x00080000
#define ETH_TX_LAST_DESC 0x00100000
#define ETH_TX_FIRST_DESC 0x00200000
#define ETH_GEN_CRC 0x00400000
#define ETH_TX_ENABLE_INTERRUPT 0x00800000
#define ETH_AUTO_MODE 0x40000000
#define ETH_TX_IHL_SHIFT 11
/* typedefs */
typedef enum _eth_func_ret_status {
ETH_OK, /* Returned as expected. */
ETH_ERROR, /* Fundamental error. */
ETH_RETRY, /* Could not process request. Try later.*/
ETH_END_OF_JOB, /* Ring has nothing to process. */
ETH_QUEUE_FULL, /* Ring resource error. */
ETH_QUEUE_LAST_RESOURCE /* Ring resources about to exhaust. */
} ETH_FUNC_RET_STATUS;
typedef enum _eth_target {
ETH_TARGET_DRAM,
ETH_TARGET_DEVICE,
ETH_TARGET_CBS,
ETH_TARGET_PCI0,
ETH_TARGET_PCI1
} ETH_TARGET;
/* These are for big-endian machines. Little endian needs different
* definitions.
*/
#if defined(__BIG_ENDIAN)
struct eth_rx_desc {
u16 byte_cnt; /* Descriptor buffer byte count */
u16 buf_size; /* Buffer size */
u32 cmd_sts; /* Descriptor command status */
u32 next_desc_ptr; /* Next descriptor pointer */
u32 buf_ptr; /* Descriptor buffer pointer */
};
struct eth_tx_desc {
u16 byte_cnt; /* buffer byte count */
u16 l4i_chk; /* CPU provided TCP checksum */
u32 cmd_sts; /* Command/status field */
u32 next_desc_ptr; /* Pointer to next descriptor */
u32 buf_ptr; /* pointer to buffer for this descriptor*/
};
#elif defined(__LITTLE_ENDIAN)
struct eth_rx_desc {
u32 cmd_sts; /* Descriptor command status */
u16 buf_size; /* Buffer size */
u16 byte_cnt; /* Descriptor buffer byte count */
u32 buf_ptr; /* Descriptor buffer pointer */
u32 next_desc_ptr; /* Next descriptor pointer */
};
struct eth_tx_desc {
u32 cmd_sts; /* Command/status field */
u16 l4i_chk; /* CPU provided TCP checksum */
u16 byte_cnt; /* buffer byte count */
u32 buf_ptr; /* pointer to buffer for this descriptor*/
u32 next_desc_ptr; /* Pointer to next descriptor */
};
#else
#error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined
#endif
/* Unified struct for Rx and Tx operations. The user is not required to */
/* be familier with neither Tx nor Rx descriptors. */
struct pkt_info {
unsigned short byte_cnt; /* Descriptor buffer byte count */
unsigned short l4i_chk; /* Tx CPU provided TCP Checksum */
unsigned int cmd_sts; /* Descriptor command status */
dma_addr_t buf_ptr; /* Descriptor buffer pointer */
struct sk_buff *return_info; /* User resource return information */
};
/* Ethernet port specific information */
struct mv643xx_mib_counters {
u64 good_octets_received;
u32 bad_octets_received;
u32 internal_mac_transmit_err;
u32 good_frames_received;
u32 bad_frames_received;
u32 broadcast_frames_received;
u32 multicast_frames_received;
u32 frames_64_octets;
u32 frames_65_to_127_octets;
u32 frames_128_to_255_octets;
u32 frames_256_to_511_octets;
u32 frames_512_to_1023_octets;
u32 frames_1024_to_max_octets;
u64 good_octets_sent;
u32 good_frames_sent;
u32 excessive_collision;
u32 multicast_frames_sent;
u32 broadcast_frames_sent;
u32 unrec_mac_control_received;
u32 fc_sent;
u32 good_fc_received;
u32 bad_fc_received;
u32 undersize_received;
u32 fragments_received;
u32 oversize_received;
u32 jabber_received;
u32 mac_receive_error;
u32 bad_crc_event;
u32 collision;
u32 late_collision;
};
struct mv643xx_private {
int port_num; /* User Ethernet port number */
u32 rx_sram_addr; /* Base address of rx sram area */
u32 rx_sram_size; /* Size of rx sram area */
u32 tx_sram_addr; /* Base address of tx sram area */
u32 tx_sram_size; /* Size of tx sram area */
int rx_resource_err; /* Rx ring resource error flag */
/* Tx/Rx rings managment indexes fields. For driver use */
/* Next available and first returning Rx resource */
int rx_curr_desc_q, rx_used_desc_q;
/* Next available and first returning Tx resource */
int tx_curr_desc_q, tx_used_desc_q;
#ifdef MV643XX_TX_FAST_REFILL
u32 tx_clean_threshold;
#endif
struct eth_rx_desc *p_rx_desc_area;
dma_addr_t rx_desc_dma;
int rx_desc_area_size;
struct sk_buff **rx_skb;
struct eth_tx_desc *p_tx_desc_area;
dma_addr_t tx_desc_dma;
int tx_desc_area_size;
struct sk_buff **tx_skb;
struct work_struct tx_timeout_task;
struct net_device *dev;
struct napi_struct napi;
struct net_device_stats stats;
struct mv643xx_mib_counters mib_counters;
spinlock_t lock;
/* Size of Tx Ring per queue */
int tx_ring_size;
/* Number of tx descriptors in use */
int tx_desc_count;
/* Size of Rx Ring per queue */
int rx_ring_size;
/* Number of rx descriptors in use */
int rx_desc_count;
/*
* Used in case RX Ring is empty, which can be caused when
* system does not have resources (skb's)
*/
struct timer_list timeout;
u32 rx_int_coal;
u32 tx_int_coal;
struct mii_if_info mii;
};
/* Static function declarations */
static void eth_port_init(struct mv643xx_private *mp);
static void eth_port_reset(unsigned int eth_port_num);
static void eth_port_start(struct net_device *dev);
static void ethernet_phy_reset(unsigned int eth_port_num);
static void eth_port_write_smi_reg(unsigned int eth_port_num,
unsigned int phy_reg, unsigned int value);
static void eth_port_read_smi_reg(unsigned int eth_port_num,
unsigned int phy_reg, unsigned int *value);
static void eth_clear_mib_counters(unsigned int eth_port_num);
static ETH_FUNC_RET_STATUS eth_port_receive(struct mv643xx_private *mp,
struct pkt_info *p_pkt_info);
static ETH_FUNC_RET_STATUS eth_rx_return_buff(struct mv643xx_private *mp,
struct pkt_info *p_pkt_info);
static void eth_port_uc_addr_get(unsigned int port_num, unsigned char *p_addr);
static void eth_port_uc_addr_set(unsigned int port_num, unsigned char *p_addr);
static void eth_port_set_multicast_list(struct net_device *);

567
drivers/net/mv643xx_eth.h
View File

@ -1,567 +0,0 @@
#ifndef __MV643XX_ETH_H__
#define __MV643XX_ETH_H__
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/mii.h>
#include <linux/mv643xx_eth.h>
#include <asm/dma-mapping.h>
/* Checksum offload for Tx works for most packets, but
* fails if previous packet sent did not use hw csum
*/
#define MV643XX_CHECKSUM_OFFLOAD_TX
#define MV643XX_NAPI
#define MV643XX_TX_FAST_REFILL
#undef MV643XX_COAL
/*
* Number of RX / TX descriptors on RX / TX rings.
* Note that allocating RX descriptors is done by allocating the RX
* ring AND a preallocated RX buffers (skb's) for each descriptor.
* The TX descriptors only allocates the TX descriptors ring,
* with no pre allocated TX buffers (skb's are allocated by higher layers.
*/
/* Default TX ring size is 1000 descriptors */
#define MV643XX_DEFAULT_TX_QUEUE_SIZE 1000
/* Default RX ring size is 400 descriptors */
#define MV643XX_DEFAULT_RX_QUEUE_SIZE 400
#define MV643XX_TX_COAL 100
#ifdef MV643XX_COAL
#define MV643XX_RX_COAL 100
#endif
#ifdef MV643XX_CHECKSUM_OFFLOAD_TX
#define MAX_DESCS_PER_SKB (MAX_SKB_FRAGS + 1)
#else
#define MAX_DESCS_PER_SKB 1
#endif
#define ETH_VLAN_HLEN 4
#define ETH_FCS_LEN 4
#define ETH_HW_IP_ALIGN 2 /* hw aligns IP header */
#define ETH_WRAPPER_LEN (ETH_HW_IP_ALIGN + ETH_HLEN + \
ETH_VLAN_HLEN + ETH_FCS_LEN)
#define ETH_RX_SKB_SIZE (dev->mtu + ETH_WRAPPER_LEN + \
dma_get_cache_alignment())
/*
* Registers shared between all ports.
*/
#define PHY_ADDR_REG 0x0000
#define SMI_REG 0x0004
/*
* Per-port registers.
*/
#define PORT_CONFIG_REG(p) (0x0400 + ((p) << 10))
#define PORT_CONFIG_EXTEND_REG(p) (0x0404 + ((p) << 10))
#define MAC_ADDR_LOW(p) (0x0414 + ((p) << 10))
#define MAC_ADDR_HIGH(p) (0x0418 + ((p) << 10))
#define SDMA_CONFIG_REG(p) (0x041c + ((p) << 10))
#define PORT_SERIAL_CONTROL_REG(p) (0x043c + ((p) << 10))
#define PORT_STATUS_REG(p) (0x0444 + ((p) << 10))
#define TRANSMIT_QUEUE_COMMAND_REG(p) (0x0448 + ((p) << 10))
#define MAXIMUM_TRANSMIT_UNIT(p) (0x0458 + ((p) << 10))
#define INTERRUPT_CAUSE_REG(p) (0x0460 + ((p) << 10))
#define INTERRUPT_CAUSE_EXTEND_REG(p) (0x0464 + ((p) << 10))
#define INTERRUPT_MASK_REG(p) (0x0468 + ((p) << 10))
#define INTERRUPT_EXTEND_MASK_REG(p) (0x046c + ((p) << 10))
#define TX_FIFO_URGENT_THRESHOLD_REG(p) (0x0474 + ((p) << 10))
#define RX_CURRENT_QUEUE_DESC_PTR_0(p) (0x060c + ((p) << 10))
#define RECEIVE_QUEUE_COMMAND_REG(p) (0x0680 + ((p) << 10))
#define TX_CURRENT_QUEUE_DESC_PTR_0(p) (0x06c0 + ((p) << 10))
#define MIB_COUNTERS_BASE(p) (0x1000 + ((p) << 7))
#define DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(p) (0x1400 + ((p) << 10))
#define DA_FILTER_OTHER_MULTICAST_TABLE_BASE(p) (0x1500 + ((p) << 10))
#define DA_FILTER_UNICAST_TABLE_BASE(p) (0x1600 + ((p) << 10))
/* These macros describe Ethernet Port configuration reg (Px_cR) bits */
#define UNICAST_NORMAL_MODE (0 << 0)
#define UNICAST_PROMISCUOUS_MODE (1 << 0)
#define DEFAULT_RX_QUEUE(queue) ((queue) << 1)
#define DEFAULT_RX_ARP_QUEUE(queue) ((queue) << 4)
#define RECEIVE_BC_IF_NOT_IP_OR_ARP (0 << 7)
#define REJECT_BC_IF_NOT_IP_OR_ARP (1 << 7)
#define RECEIVE_BC_IF_IP (0 << 8)
#define REJECT_BC_IF_IP (1 << 8)
#define RECEIVE_BC_IF_ARP (0 << 9)
#define REJECT_BC_IF_ARP (1 << 9)
#define TX_AM_NO_UPDATE_ERROR_SUMMARY (1 << 12)
#define CAPTURE_TCP_FRAMES_DIS (0 << 14)
#define CAPTURE_TCP_FRAMES_EN (1 << 14)
#define CAPTURE_UDP_FRAMES_DIS (0 << 15)
#define CAPTURE_UDP_FRAMES_EN (1 << 15)
#define DEFAULT_RX_TCP_QUEUE(queue) ((queue) << 16)
#define DEFAULT_RX_UDP_QUEUE(queue) ((queue) << 19)
#define DEFAULT_RX_BPDU_QUEUE(queue) ((queue) << 22)
#define PORT_CONFIG_DEFAULT_VALUE \
UNICAST_NORMAL_MODE | \
DEFAULT_RX_QUEUE(0) | \
DEFAULT_RX_ARP_QUEUE(0) | \
RECEIVE_BC_IF_NOT_IP_OR_ARP | \
RECEIVE_BC_IF_IP | \
RECEIVE_BC_IF_ARP | \
CAPTURE_TCP_FRAMES_DIS | \
CAPTURE_UDP_FRAMES_DIS | \
DEFAULT_RX_TCP_QUEUE(0) | \
DEFAULT_RX_UDP_QUEUE(0) | \
DEFAULT_RX_BPDU_QUEUE(0)
/* These macros describe Ethernet Port configuration extend reg (Px_cXR) bits*/
#define CLASSIFY_EN (1 << 0)
#define SPAN_BPDU_PACKETS_AS_NORMAL (0 << 1)
#define SPAN_BPDU_PACKETS_TO_RX_QUEUE_7 (1 << 1)
#define PARTITION_DISABLE (0 << 2)
#define PARTITION_ENABLE (1 << 2)
#define PORT_CONFIG_EXTEND_DEFAULT_VALUE \
SPAN_BPDU_PACKETS_AS_NORMAL | \
PARTITION_DISABLE
/* These macros describe Ethernet Port Sdma configuration reg (SDCR) bits */
#define RIFB (1 << 0)
#define RX_BURST_SIZE_1_64BIT (0 << 1)
#define RX_BURST_SIZE_2_64BIT (1 << 1)
#define RX_BURST_SIZE_4_64BIT (2 << 1)
#define RX_BURST_SIZE_8_64BIT (3 << 1)
#define RX_BURST_SIZE_16_64BIT (4 << 1)
#define BLM_RX_NO_SWAP (1 << 4)
#define BLM_RX_BYTE_SWAP (0 << 4)
#define BLM_TX_NO_SWAP (1 << 5)
#define BLM_TX_BYTE_SWAP (0 << 5)
#define DESCRIPTORS_BYTE_SWAP (1 << 6)
#define DESCRIPTORS_NO_SWAP (0 << 6)
#define IPG_INT_RX(value) (((value) & 0x3fff) << 8)
#define TX_BURST_SIZE_1_64BIT (0 << 22)
#define TX_BURST_SIZE_2_64BIT (1 << 22)
#define TX_BURST_SIZE_4_64BIT (2 << 22)
#define TX_BURST_SIZE_8_64BIT (3 << 22)
#define TX_BURST_SIZE_16_64BIT (4 << 22)
#if defined(__BIG_ENDIAN)
#define PORT_SDMA_CONFIG_DEFAULT_VALUE \
RX_BURST_SIZE_4_64BIT | \
IPG_INT_RX(0) | \
TX_BURST_SIZE_4_64BIT
#elif defined(__LITTLE_ENDIAN)
#define PORT_SDMA_CONFIG_DEFAULT_VALUE \
RX_BURST_SIZE_4_64BIT | \
BLM_RX_NO_SWAP | \
BLM_TX_NO_SWAP | \
IPG_INT_RX(0) | \
TX_BURST_SIZE_4_64BIT
#else
#error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined
#endif
/* These macros describe Ethernet Port serial control reg (PSCR) bits */
#define SERIAL_PORT_DISABLE (0 << 0)
#define SERIAL_PORT_ENABLE (1 << 0)
#define DO_NOT_FORCE_LINK_PASS (0 << 1)
#define FORCE_LINK_PASS (1 << 1)
#define ENABLE_AUTO_NEG_FOR_DUPLX (0 << 2)
#define DISABLE_AUTO_NEG_FOR_DUPLX (1 << 2)
#define ENABLE_AUTO_NEG_FOR_FLOW_CTRL (0 << 3)
#define DISABLE_AUTO_NEG_FOR_FLOW_CTRL (1 << 3)
#define ADV_NO_FLOW_CTRL (0 << 4)
#define ADV_SYMMETRIC_FLOW_CTRL (1 << 4)
#define FORCE_FC_MODE_NO_PAUSE_DIS_TX (0 << 5)
#define FORCE_FC_MODE_TX_PAUSE_DIS (1 << 5)
#define FORCE_BP_MODE_NO_JAM (0 << 7)
#define FORCE_BP_MODE_JAM_TX (1 << 7)
#define FORCE_BP_MODE_JAM_TX_ON_RX_ERR (2 << 7)
#define SERIAL_PORT_CONTROL_RESERVED (1 << 9)
#define FORCE_LINK_FAIL (0 << 10)
#define DO_NOT_FORCE_LINK_FAIL (1 << 10)
#define RETRANSMIT_16_ATTEMPTS (0 << 11)
#define RETRANSMIT_FOREVER (1 << 11)
#define ENABLE_AUTO_NEG_SPEED_GMII (0 << 13)
#define DISABLE_AUTO_NEG_SPEED_GMII (1 << 13)
#define DTE_ADV_0 (0 << 14)
#define DTE_ADV_1 (1 << 14)
#define DISABLE_AUTO_NEG_BYPASS (0 << 15)
#define ENABLE_AUTO_NEG_BYPASS (1 << 15)
#define AUTO_NEG_NO_CHANGE (0 << 16)
#define RESTART_AUTO_NEG (1 << 16)
#define MAX_RX_PACKET_1518BYTE (0 << 17)
#define MAX_RX_PACKET_1522BYTE (1 << 17)
#define MAX_RX_PACKET_1552BYTE (2 << 17)
#define MAX_RX_PACKET_9022BYTE (3 << 17)
#define MAX_RX_PACKET_9192BYTE (4 << 17)
#define MAX_RX_PACKET_9700BYTE (5 << 17)
#define MAX_RX_PACKET_MASK (7 << 17)
#define CLR_EXT_LOOPBACK (0 << 20)
#define SET_EXT_LOOPBACK (1 << 20)
#define SET_HALF_DUPLEX_MODE (0 << 21)
#define SET_FULL_DUPLEX_MODE (1 << 21)
#define DISABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX (0 << 22)
#define ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX (1 << 22)
#define SET_GMII_SPEED_TO_10_100 (0 << 23)
#define SET_GMII_SPEED_TO_1000 (1 << 23)
#define SET_MII_SPEED_TO_10 (0 << 24)
#define SET_MII_SPEED_TO_100 (1 << 24)
#define PORT_SERIAL_CONTROL_DEFAULT_VALUE \
DO_NOT_FORCE_LINK_PASS | \
ENABLE_AUTO_NEG_FOR_DUPLX | \
DISABLE_AUTO_NEG_FOR_FLOW_CTRL | \
ADV_SYMMETRIC_FLOW_CTRL | \
FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
FORCE_BP_MODE_NO_JAM | \
(1 << 9) /* reserved */ | \
DO_NOT_FORCE_LINK_FAIL | \
RETRANSMIT_16_ATTEMPTS | \
ENABLE_AUTO_NEG_SPEED_GMII | \
DTE_ADV_0 | \
DISABLE_AUTO_NEG_BYPASS | \
AUTO_NEG_NO_CHANGE | \
MAX_RX_PACKET_9700BYTE | \
CLR_EXT_LOOPBACK | \
SET_FULL_DUPLEX_MODE | \
ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX
/* These macros describe Ethernet Serial Status reg (PSR) bits */
#define PORT_STATUS_MODE_10_BIT (1 << 0)
#define PORT_STATUS_LINK_UP (1 << 1)
#define PORT_STATUS_FULL_DUPLEX (1 << 2)
#define PORT_STATUS_FLOW_CONTROL (1 << 3)
#define PORT_STATUS_GMII_1000 (1 << 4)
#define PORT_STATUS_MII_100 (1 << 5)
/* PSR bit 6 is undocumented */
#define PORT_STATUS_TX_IN_PROGRESS (1 << 7)
#define PORT_STATUS_AUTONEG_BYPASSED (1 << 8)
#define PORT_STATUS_PARTITION (1 << 9)
#define PORT_STATUS_TX_FIFO_EMPTY (1 << 10)
/* PSR bits 11-31 are reserved */
#define PORT_DEFAULT_TRANSMIT_QUEUE_SIZE 800
#define PORT_DEFAULT_RECEIVE_QUEUE_SIZE 400
#define DESC_SIZE 64
#define ETH_RX_QUEUES_ENABLED (1 << 0) /* use only Q0 for receive */
#define ETH_TX_QUEUES_ENABLED (1 << 0) /* use only Q0 for transmit */
#define ETH_INT_CAUSE_RX_DONE (ETH_RX_QUEUES_ENABLED << 2)
#define ETH_INT_CAUSE_RX_ERROR (ETH_RX_QUEUES_ENABLED << 9)
#define ETH_INT_CAUSE_RX (ETH_INT_CAUSE_RX_DONE | ETH_INT_CAUSE_RX_ERROR)
#define ETH_INT_CAUSE_EXT 0x00000002
#define ETH_INT_UNMASK_ALL (ETH_INT_CAUSE_RX | ETH_INT_CAUSE_EXT)
#define ETH_INT_CAUSE_TX_DONE (ETH_TX_QUEUES_ENABLED << 0)
#define ETH_INT_CAUSE_TX_ERROR (ETH_TX_QUEUES_ENABLED << 8)
#define ETH_INT_CAUSE_TX (ETH_INT_CAUSE_TX_DONE | ETH_INT_CAUSE_TX_ERROR)
#define ETH_INT_CAUSE_PHY 0x00010000
#define ETH_INT_CAUSE_STATE 0x00100000
#define ETH_INT_UNMASK_ALL_EXT (ETH_INT_CAUSE_TX | ETH_INT_CAUSE_PHY | \
ETH_INT_CAUSE_STATE)
#define ETH_INT_MASK_ALL 0x00000000
#define ETH_INT_MASK_ALL_EXT 0x00000000
#define PHY_WAIT_ITERATIONS 1000 /* 1000 iterations * 10uS = 10mS max */
#define PHY_WAIT_MICRO_SECONDS 10
/* Buffer offset from buffer pointer */
#define RX_BUF_OFFSET 0x2
/* Gigabit Ethernet Unit Global Registers */
/* MIB Counters register definitions */
#define ETH_MIB_GOOD_OCTETS_RECEIVED_LOW 0x0
#define ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH 0x4
#define ETH_MIB_BAD_OCTETS_RECEIVED 0x8
#define ETH_MIB_INTERNAL_MAC_TRANSMIT_ERR 0xc
#define ETH_MIB_GOOD_FRAMES_RECEIVED 0x10
#define ETH_MIB_BAD_FRAMES_RECEIVED 0x14
#define ETH_MIB_BROADCAST_FRAMES_RECEIVED 0x18
#define ETH_MIB_MULTICAST_FRAMES_RECEIVED 0x1c
#define ETH_MIB_FRAMES_64_OCTETS 0x20
#define ETH_MIB_FRAMES_65_TO_127_OCTETS 0x24
#define ETH_MIB_FRAMES_128_TO_255_OCTETS 0x28
#define ETH_MIB_FRAMES_256_TO_511_OCTETS 0x2c
#define ETH_MIB_FRAMES_512_TO_1023_OCTETS 0x30
#define ETH_MIB_FRAMES_1024_TO_MAX_OCTETS 0x34
#define ETH_MIB_GOOD_OCTETS_SENT_LOW 0x38
#define ETH_MIB_GOOD_OCTETS_SENT_HIGH 0x3c
#define ETH_MIB_GOOD_FRAMES_SENT 0x40
#define ETH_MIB_EXCESSIVE_COLLISION 0x44
#define ETH_MIB_MULTICAST_FRAMES_SENT 0x48
#define ETH_MIB_BROADCAST_FRAMES_SENT 0x4c
#define ETH_MIB_UNREC_MAC_CONTROL_RECEIVED 0x50
#define ETH_MIB_FC_SENT 0x54
#define ETH_MIB_GOOD_FC_RECEIVED 0x58
#define ETH_MIB_BAD_FC_RECEIVED 0x5c
#define ETH_MIB_UNDERSIZE_RECEIVED 0x60
#define ETH_MIB_FRAGMENTS_RECEIVED 0x64
#define ETH_MIB_OVERSIZE_RECEIVED 0x68
#define ETH_MIB_JABBER_RECEIVED 0x6c
#define ETH_MIB_MAC_RECEIVE_ERROR 0x70
#define ETH_MIB_BAD_CRC_EVENT 0x74
#define ETH_MIB_COLLISION 0x78
#define ETH_MIB_LATE_COLLISION 0x7c
/* Port serial status reg (PSR) */
#define ETH_INTERFACE_PCM 0x00000001
#define ETH_LINK_IS_UP 0x00000002
#define ETH_PORT_AT_FULL_DUPLEX 0x00000004
#define ETH_RX_FLOW_CTRL_ENABLED 0x00000008
#define ETH_GMII_SPEED_1000 0x00000010
#define ETH_MII_SPEED_100 0x00000020
#define ETH_TX_IN_PROGRESS 0x00000080
#define ETH_BYPASS_ACTIVE 0x00000100
#define ETH_PORT_AT_PARTITION_STATE 0x00000200
#define ETH_PORT_TX_FIFO_EMPTY 0x00000400
/* SMI reg */
#define ETH_SMI_BUSY 0x10000000 /* 0 - Write, 1 - Read */
#define ETH_SMI_READ_VALID 0x08000000 /* 0 - Write, 1 - Read */
#define ETH_SMI_OPCODE_WRITE 0 /* Completion of Read */
#define ETH_SMI_OPCODE_READ 0x04000000 /* Operation is in progress */
/* Interrupt Cause Register Bit Definitions */
/* SDMA command status fields macros */
/* Tx & Rx descriptors status */
#define ETH_ERROR_SUMMARY 0x00000001
/* Tx & Rx descriptors command */
#define ETH_BUFFER_OWNED_BY_DMA 0x80000000
/* Tx descriptors status */
#define ETH_LC_ERROR 0
#define ETH_UR_ERROR 0x00000002
#define ETH_RL_ERROR 0x00000004
#define ETH_LLC_SNAP_FORMAT 0x00000200
/* Rx descriptors status */
#define ETH_OVERRUN_ERROR 0x00000002
#define ETH_MAX_FRAME_LENGTH_ERROR 0x00000004
#define ETH_RESOURCE_ERROR 0x00000006
#define ETH_VLAN_TAGGED 0x00080000
#define ETH_BPDU_FRAME 0x00100000
#define ETH_UDP_FRAME_OVER_IP_V_4 0x00200000
#define ETH_OTHER_FRAME_TYPE 0x00400000
#define ETH_LAYER_2_IS_ETH_V_2 0x00800000
#define ETH_FRAME_TYPE_IP_V_4 0x01000000
#define ETH_FRAME_HEADER_OK 0x02000000
#define ETH_RX_LAST_DESC 0x04000000
#define ETH_RX_FIRST_DESC 0x08000000
#define ETH_UNKNOWN_DESTINATION_ADDR 0x10000000
#define ETH_RX_ENABLE_INTERRUPT 0x20000000
#define ETH_LAYER_4_CHECKSUM_OK 0x40000000
/* Rx descriptors byte count */
#define ETH_FRAME_FRAGMENTED 0x00000004
/* Tx descriptors command */
#define ETH_LAYER_4_CHECKSUM_FIRST_DESC 0x00000400
#define ETH_FRAME_SET_TO_VLAN 0x00008000
#define ETH_UDP_FRAME 0x00010000
#define ETH_GEN_TCP_UDP_CHECKSUM 0x00020000
#define ETH_GEN_IP_V_4_CHECKSUM 0x00040000
#define ETH_ZERO_PADDING 0x00080000
#define ETH_TX_LAST_DESC 0x00100000
#define ETH_TX_FIRST_DESC 0x00200000
#define ETH_GEN_CRC 0x00400000
#define ETH_TX_ENABLE_INTERRUPT 0x00800000
#define ETH_AUTO_MODE 0x40000000
#define ETH_TX_IHL_SHIFT 11
/* typedefs */
typedef enum _eth_func_ret_status {
ETH_OK, /* Returned as expected. */
ETH_ERROR, /* Fundamental error. */
ETH_RETRY, /* Could not process request. Try later.*/
ETH_END_OF_JOB, /* Ring has nothing to process. */
ETH_QUEUE_FULL, /* Ring resource error. */
ETH_QUEUE_LAST_RESOURCE /* Ring resources about to exhaust. */
} ETH_FUNC_RET_STATUS;
typedef enum _eth_target {
ETH_TARGET_DRAM,
ETH_TARGET_DEVICE,
ETH_TARGET_CBS,
ETH_TARGET_PCI0,
ETH_TARGET_PCI1
} ETH_TARGET;
/* These are for big-endian machines. Little endian needs different
* definitions.
*/
#if defined(__BIG_ENDIAN)
struct eth_rx_desc {
u16 byte_cnt; /* Descriptor buffer byte count */
u16 buf_size; /* Buffer size */
u32 cmd_sts; /* Descriptor command status */
u32 next_desc_ptr; /* Next descriptor pointer */
u32 buf_ptr; /* Descriptor buffer pointer */
};
struct eth_tx_desc {
u16 byte_cnt; /* buffer byte count */
u16 l4i_chk; /* CPU provided TCP checksum */
u32 cmd_sts; /* Command/status field */
u32 next_desc_ptr; /* Pointer to next descriptor */
u32 buf_ptr; /* pointer to buffer for this descriptor*/
};
#elif defined(__LITTLE_ENDIAN)
struct eth_rx_desc {
u32 cmd_sts; /* Descriptor command status */
u16 buf_size; /* Buffer size */
u16 byte_cnt; /* Descriptor buffer byte count */
u32 buf_ptr; /* Descriptor buffer pointer */
u32 next_desc_ptr; /* Next descriptor pointer */
};
struct eth_tx_desc {
u32 cmd_sts; /* Command/status field */
u16 l4i_chk; /* CPU provided TCP checksum */
u16 byte_cnt; /* buffer byte count */
u32 buf_ptr; /* pointer to buffer for this descriptor*/
u32 next_desc_ptr; /* Pointer to next descriptor */
};
#else
#error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined
#endif
/* Unified struct for Rx and Tx operations. The user is not required to */
/* be familier with neither Tx nor Rx descriptors. */
struct pkt_info {
unsigned short byte_cnt; /* Descriptor buffer byte count */
unsigned short l4i_chk; /* Tx CPU provided TCP Checksum */
unsigned int cmd_sts; /* Descriptor command status */
dma_addr_t buf_ptr; /* Descriptor buffer pointer */
struct sk_buff *return_info; /* User resource return information */
};
/* Ethernet port specific information */
struct mv643xx_mib_counters {
u64 good_octets_received;
u32 bad_octets_received;
u32 internal_mac_transmit_err;
u32 good_frames_received;
u32 bad_frames_received;
u32 broadcast_frames_received;
u32 multicast_frames_received;
u32 frames_64_octets;
u32 frames_65_to_127_octets;
u32 frames_128_to_255_octets;
u32 frames_256_to_511_octets;
u32 frames_512_to_1023_octets;
u32 frames_1024_to_max_octets;
u64 good_octets_sent;
u32 good_frames_sent;
u32 excessive_collision;
u32 multicast_frames_sent;
u32 broadcast_frames_sent;
u32 unrec_mac_control_received;
u32 fc_sent;
u32 good_fc_received;
u32 bad_fc_received;
u32 undersize_received;
u32 fragments_received;
u32 oversize_received;
u32 jabber_received;
u32 mac_receive_error;
u32 bad_crc_event;
u32 collision;
u32 late_collision;
};
struct mv643xx_private {
int port_num; /* User Ethernet port number */
u32 rx_sram_addr; /* Base address of rx sram area */
u32 rx_sram_size; /* Size of rx sram area */
u32 tx_sram_addr; /* Base address of tx sram area */
u32 tx_sram_size; /* Size of tx sram area */
int rx_resource_err; /* Rx ring resource error flag */
/* Tx/Rx rings managment indexes fields. For driver use */
/* Next available and first returning Rx resource */
int rx_curr_desc_q, rx_used_desc_q;
/* Next available and first returning Tx resource */
int tx_curr_desc_q, tx_used_desc_q;
#ifdef MV643XX_TX_FAST_REFILL
u32 tx_clean_threshold;
#endif
struct eth_rx_desc *p_rx_desc_area;
dma_addr_t rx_desc_dma;
int rx_desc_area_size;
struct sk_buff **rx_skb;
struct eth_tx_desc *p_tx_desc_area;
dma_addr_t tx_desc_dma;
int tx_desc_area_size;
struct sk_buff **tx_skb;
struct work_struct tx_timeout_task;
struct net_device *dev;
struct napi_struct napi;
struct net_device_stats stats;
struct mv643xx_mib_counters mib_counters;
spinlock_t lock;
/* Size of Tx Ring per queue */
int tx_ring_size;
/* Number of tx descriptors in use */
int tx_desc_count;
/* Size of Rx Ring per queue */
int rx_ring_size;
/* Number of rx descriptors in use */
int rx_desc_count;
/*
* Used in case RX Ring is empty, which can be caused when
* system does not have resources (skb's)
*/
struct timer_list timeout;
u32 rx_int_coal;
u32 tx_int_coal;
struct mii_if_info mii;
};
/* Port operation control routines */
static void eth_port_init(struct mv643xx_private *mp);
static void eth_port_reset(unsigned int eth_port_num);
static void eth_port_start(struct net_device *dev);
/* PHY and MIB routines */
static void ethernet_phy_reset(unsigned int eth_port_num);
static void eth_port_write_smi_reg(unsigned int eth_port_num,
unsigned int phy_reg, unsigned int value);
static void eth_port_read_smi_reg(unsigned int eth_port_num,
unsigned int phy_reg, unsigned int *value);
static void eth_clear_mib_counters(unsigned int eth_port_num);
/* Port data flow control routines */
static ETH_FUNC_RET_STATUS eth_port_receive(struct mv643xx_private *mp,
struct pkt_info *p_pkt_info);
static ETH_FUNC_RET_STATUS eth_rx_return_buff(struct mv643xx_private *mp,
struct pkt_info *p_pkt_info);
#endif