Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-04 01:51:34 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge remote branch 'airlied/drm-core-next' into tmp

Browse Source
This commit is contained in:
Chris Wilson 2010-10-19 09:13:00 +01:00
commit fb9a90f7c6
435 changed files with 3338 additions and 1800 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
CREDITS
View File

@ -3554,12 +3554,12 @@ E: cvance@nai.com
D: portions of the Linux Security Module (LSM) framework and security modules
N: Petr Vandrovec
E: vandrove@vc.cvut.cz
E: petr@vandrovec.name
D: Small contributions to ncpfs
D: Matrox framebuffer driver
S: Chudenicka 8
S: 10200 Prague 10, Hostivar
S: Czech Republic
S: 21513 Conradia Ct
S: Cupertino, CA 95014
S: USA
N: Thibaut Varene
E: T-Bone@parisc-linux.org

373
Documentation/networking/e1000.txt
View File

@ -1,82 +1,35 @@
Linux* Base Driver for the Intel(R) PRO/1000 Family of Adapters
===============================================================
September 26, 2006
Intel Gigabit Linux driver.
Copyright(c) 1999 - 2010 Intel Corporation.
Contents
========
- In This Release
- Identifying Your Adapter
- Building and Installation
- Command Line Parameters
- Speed and Duplex Configuration
- Additional Configurations
- Known Issues
- Support
In This Release
===============
This file describes the Linux* Base Driver for the Intel(R) PRO/1000 Family
of Adapters. This driver includes support for Itanium(R)2-based systems.
For questions related to hardware requirements, refer to the documentation
supplied with your Intel PRO/1000 adapter. All hardware requirements listed
apply to use with Linux.
The following features are now available in supported kernels:
- Native VLANs
- Channel Bonding (teaming)
- SNMP
Channel Bonding documentation can be found in the Linux kernel source:
/Documentation/networking/bonding.txt
The driver information previously displayed in the /proc filesystem is not
supported in this release. Alternatively, you can use ethtool (version 1.6
or later), lspci, and ifconfig to obtain the same information.
Instructions on updating ethtool can be found in the section "Additional
Configurations" later in this document.
NOTE: The Intel(R) 82562v 10/100 Network Connection only provides 10/100
support.
Identifying Your Adapter
========================
For more information on how to identify your adapter, go to the Adapter &
Driver ID Guide at:
http://support.intel.com/support/network/adapter/pro100/21397.htm
http://support.intel.com/support/go/network/adapter/idguide.htm
For the latest Intel network drivers for Linux, refer to the following
website. In the search field, enter your adapter name or type, or use the
networking link on the left to search for your adapter:
http://downloadfinder.intel.com/scripts-df/support_intel.asp
http://support.intel.com/support/go/network/adapter/home.htm
Command Line Parameters
=======================
If the driver is built as a module, the following optional parameters
are used by entering them on the command line with the modprobe command
using this syntax:
modprobe e1000 [<option>=<VAL1>,<VAL2>,...]
For example, with two PRO/1000 PCI adapters, entering:
modprobe e1000 TxDescriptors=80,128
loads the e1000 driver with 80 TX descriptors for the first adapter and
128 TX descriptors for the second adapter.
The default value for each parameter is generally the recommended setting,
unless otherwise noted.
@ -89,10 +42,6 @@ NOTES: For more information about the AutoNeg, Duplex, and Speed
parameters, see the application note at:
http://www.intel.com/design/network/applnots/ap450.htm
A descriptor describes a data buffer and attributes related to
the data buffer. This information is accessed by the hardware.
AutoNeg
-------
(Supported only on adapters with copper connections)
@ -106,7 +55,6 @@ Duplex parameters must not be specified.
NOTE: Refer to the Speed and Duplex section of this readme for more
information on the AutoNeg parameter.
Duplex
------
(Supported only on adapters with copper connections)
@ -119,7 +67,6 @@ set to auto-negotiate, the board auto-detects the correct duplex. If the
link partner is forced (either full or half), Duplex defaults to half-
duplex.
FlowControl
-----------
Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
@ -128,16 +75,16 @@ Default Value: Reads flow control settings from the EEPROM
This parameter controls the automatic generation(Tx) and response(Rx)
to Ethernet PAUSE frames.
InterruptThrottleRate
---------------------
(not supported on Intel(R) 82542, 82543 or 82544-based adapters)
Valid Range: 0,1,3,100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
Valid Range: 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
4=simplified balancing)
Default Value: 3
The driver can limit the amount of interrupts per second that the adapter
will generate for incoming packets. It does this by writing a value to the
adapter that is based on the maximum amount of interrupts that the adapter
will generate for incoming packets. It does this by writing a value to the
adapter that is based on the maximum amount of interrupts that the adapter
will generate per second.
Setting InterruptThrottleRate to a value greater or equal to 100
@ -146,37 +93,43 @@ per second, even if more packets have come in. This reduces interrupt
load on the system and can lower CPU utilization under heavy load,
but will increase latency as packets are not processed as quickly.
The default behaviour of the driver previously assumed a static
InterruptThrottleRate value of 8000, providing a good fallback value for
all traffic types,but lacking in small packet performance and latency.
The hardware can handle many more small packets per second however, and
The default behaviour of the driver previously assumed a static
InterruptThrottleRate value of 8000, providing a good fallback value for
all traffic types,but lacking in small packet performance and latency.
The hardware can handle many more small packets per second however, and
for this reason an adaptive interrupt moderation algorithm was implemented.
Since 7.3.x, the driver has two adaptive modes (setting 1 or 3) in which
it dynamically adjusts the InterruptThrottleRate value based on the traffic
it dynamically adjusts the InterruptThrottleRate value based on the traffic
that it receives. After determining the type of incoming traffic in the last
timeframe, it will adjust the InterruptThrottleRate to an appropriate value
timeframe, it will adjust the InterruptThrottleRate to an appropriate value
for that traffic.
The algorithm classifies the incoming traffic every interval into
classes. Once the class is determined, the InterruptThrottleRate value is
adjusted to suit that traffic type the best. There are three classes defined:
classes. Once the class is determined, the InterruptThrottleRate value is
adjusted to suit that traffic type the best. There are three classes defined:
"Bulk traffic", for large amounts of packets of normal size; "Low latency",
for small amounts of traffic and/or a significant percentage of small
packets; and "Lowest latency", for almost completely small packets or
packets; and "Lowest latency", for almost completely small packets or
minimal traffic.
In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
latency" or "Lowest latency" class, the InterruptThrottleRate is increased
In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
latency" or "Lowest latency" class, the InterruptThrottleRate is increased
stepwise to 20000. This default mode is suitable for most applications.
For situations where low latency is vital such as cluster or
grid computing, the algorithm can reduce latency even more when
InterruptThrottleRate is set to mode 1. In this mode, which operates
the same as mode 3, the InterruptThrottleRate will be increased stepwise to
the same as mode 3, the InterruptThrottleRate will be increased stepwise to
70000 for traffic in class "Lowest latency".
In simplified mode the interrupt rate is based on the ratio of Tx and
Rx traffic. If the bytes per second rate is approximately equal, the
interrupt rate will drop as low as 2000 interrupts per second. If the
traffic is mostly transmit or mostly receive, the interrupt rate could
be as high as 8000.
Setting InterruptThrottleRate to 0 turns off any interrupt moderation
and may improve small packet latency, but is generally not suitable
for bulk throughput traffic.
@ -212,8 +165,6 @@ NOTE: When e1000 is loaded with default settings and multiple adapters
be platform-specific. If CPU utilization is not a concern, use
RX_POLLING (NAPI) and default driver settings.
RxDescriptors
-------------
Valid Range: 80-256 for 82542 and 82543-based adapters
@ -225,15 +176,14 @@ by the driver. Increasing this value allows the driver to buffer more
incoming packets, at the expense of increased system memory utilization.
Each descriptor is 16 bytes. A receive buffer is also allocated for each
descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending
descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending
on the MTU setting. The maximum MTU size is 16110.
NOTE: MTU designates the frame size. It only needs to be set for Jumbo
Frames. Depending on the available system resources, the request
for a higher number of receive descriptors may be denied. In this
NOTE: MTU designates the frame size. It only needs to be set for Jumbo
Frames. Depending on the available system resources, the request
for a higher number of receive descriptors may be denied. In this
case, use a lower number.
RxIntDelay
----------
Valid Range: 0-65535 (0=off)
@ -254,7 +204,6 @@ CAUTION: When setting RxIntDelay to a value other than 0, adapters may
restoring the network connection. To eliminate the potential
for the hang ensure that RxIntDelay is set to 0.
RxAbsIntDelay
-------------
(This parameter is supported only on 82540, 82545 and later adapters.)
@ -268,7 +217,6 @@ packet is received within the set amount of time. Proper tuning,
along with RxIntDelay, may improve traffic throughput in specific network
conditions.
Speed
-----
(This parameter is supported only on adapters with copper connections.)
@ -280,7 +228,6 @@ Speed forces the line speed to the specified value in megabits per second
partner is set to auto-negotiate, the board will auto-detect the correct
speed. Duplex should also be set when Speed is set to either 10 or 100.
TxDescriptors
-------------
Valid Range: 80-256 for 82542 and 82543-based adapters
@ -295,6 +242,36 @@ NOTE: Depending on the available system resources, the request for a
higher number of transmit descriptors may be denied. In this case,
use a lower number.
TxDescriptorStep
----------------
Valid Range: 1 (use every Tx Descriptor)
4 (use every 4th Tx Descriptor)
Default Value: 1 (use every Tx Descriptor)
On certain non-Intel architectures, it has been observed that intense TX
traffic bursts of short packets may result in an improper descriptor
writeback. If this occurs, the driver will report a "TX Timeout" and reset
the adapter, after which the transmit flow will restart, though data may
have stalled for as much as 10 seconds before it resumes.
The improper writeback does not occur on the first descriptor in a system
memory cache-line, which is typically 32 bytes, or 4 descriptors long.
Setting TxDescriptorStep to a value of 4 will ensure that all TX descriptors
are aligned to the start of a system memory cache line, and so this problem
will not occur.
NOTES: Setting TxDescriptorStep to 4 effectively reduces the number of
TxDescriptors available for transmits to 1/4 of the normal allocation.
This has a possible negative performance impact, which may be
compensated for by allocating more descriptors using the TxDescriptors
module parameter.
There are other conditions which may result in "TX Timeout", which will
not be resolved by the use of the TxDescriptorStep parameter. As the
issue addressed by this parameter has never been observed on Intel
Architecture platforms, it should not be used on Intel platforms.
TxIntDelay
----------
@ -307,7 +284,6 @@ efficiency if properly tuned for specific network traffic. If the
system is reporting dropped transmits, this value may be set too high
causing the driver to run out of available transmit descriptors.
TxAbsIntDelay
-------------
(This parameter is supported only on 82540, 82545 and later adapters.)
@ -330,6 +306,35 @@ Default Value: 1
A value of '1' indicates that the driver should enable IP checksum
offload for received packets (both UDP and TCP) to the adapter hardware.
Copybreak
---------
Valid Range: 0-xxxxxxx (0=off)
Default Value: 256
Usage: insmod e1000.ko copybreak=128
Driver copies all packets below or equaling this size to a fresh Rx
buffer before handing it up the stack.
This parameter is different than other parameters, in that it is a
single (not 1,1,1 etc.) parameter applied to all driver instances and
it is also available during runtime at
/sys/module/e1000/parameters/copybreak
SmartPowerDownEnable
--------------------
Valid Range: 0-1
Default Value: 0 (disabled)
Allows PHY to turn off in lower power states. The user can turn off
this parameter in supported chipsets.
KumeranLockLoss
---------------
Valid Range: 0-1
Default Value: 1 (enabled)
This workaround skips resetting the PHY at shutdown for the initial
silicon releases of ICH8 systems.
Speed and Duplex Configuration
==============================
@ -385,40 +390,9 @@ If the link partner is forced to a specific speed and duplex, then this
parameter should not be used. Instead, use the Speed and Duplex parameters
previously mentioned to force the adapter to the same speed and duplex.
Additional Configurations
=========================
Configuring the Driver on Different Distributions
-------------------------------------------------
Configuring a network driver to load properly when the system is started
is distribution dependent. Typically, the configuration process involves
adding an alias line to /etc/modules.conf or /etc/modprobe.conf as well
as editing other system startup scripts and/or configuration files. Many
popular Linux distributions ship with tools to make these changes for you.
To learn the proper way to configure a network device for your system,
refer to your distribution documentation. If during this process you are
asked for the driver or module name, the name for the Linux Base Driver
for the Intel(R) PRO/1000 Family of Adapters is e1000.
As an example, if you install the e1000 driver for two PRO/1000 adapters
(eth0 and eth1) and set the speed and duplex to 10full and 100half, add
the following to modules.conf or or modprobe.conf:
alias eth0 e1000
alias eth1 e1000
options e1000 Speed=10,100 Duplex=2,1
Viewing Link Messages
---------------------
Link messages will not be displayed to the console if the distribution is
restricting system messages. In order to see network driver link messages
on your console, set dmesg to eight by entering the following:
dmesg -n 8
NOTE: This setting is not saved across reboots.
Jumbo Frames
------------
Jumbo Frames support is enabled by changing the MTU to a value larger than
@ -437,9 +411,11 @@ Additional Configurations
setting in a different location.
Notes:
- To enable Jumbo Frames, increase the MTU size on the interface beyond
1500.
Degradation in throughput performance may be observed in some Jumbo frames
environments. If this is observed, increasing the application's socket buffer
size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
See the specific application manual and /usr/src/linux*/Documentation/
networking/ip-sysctl.txt for more details.
- The maximum MTU setting for Jumbo Frames is 16110. This value coincides
with the maximum Jumbo Frames size of 16128.
@ -447,40 +423,11 @@ Additional Configurations
- Using Jumbo Frames at 10 or 100 Mbps may result in poor performance or
loss of link.
- Some Intel gigabit adapters that support Jumbo Frames have a frame size
limit of 9238 bytes, with a corresponding MTU size limit of 9216 bytes.
The adapters with this limitation are based on the Intel(R) 82571EB,
82572EI, 82573L and 80003ES2LAN controller. These correspond to the
following product names:
Intel(R) PRO/1000 PT Server Adapter
Intel(R) PRO/1000 PT Desktop Adapter
Intel(R) PRO/1000 PT Network Connection
Intel(R) PRO/1000 PT Dual Port Server Adapter
Intel(R) PRO/1000 PT Dual Port Network Connection
Intel(R) PRO/1000 PF Server Adapter
Intel(R) PRO/1000 PF Network Connection
Intel(R) PRO/1000 PF Dual Port Server Adapter
Intel(R) PRO/1000 PB Server Connection
Intel(R) PRO/1000 PL Network Connection
Intel(R) PRO/1000 EB Network Connection with I/O Acceleration
Intel(R) PRO/1000 EB Backplane Connection with I/O Acceleration
Intel(R) PRO/1000 PT Quad Port Server Adapter
- Adapters based on the Intel(R) 82542 and 82573V/E controller do not
support Jumbo Frames. These correspond to the following product names:
Intel(R) PRO/1000 Gigabit Server Adapter
Intel(R) PRO/1000 PM Network Connection
- The following adapters do not support Jumbo Frames:
Intel(R) 82562V 10/100 Network Connection
Intel(R) 82566DM Gigabit Network Connection
Intel(R) 82566DC Gigabit Network Connection
Intel(R) 82566MM Gigabit Network Connection
Intel(R) 82566MC Gigabit Network Connection
Intel(R) 82562GT 10/100 Network Connection
Intel(R) 82562G 10/100 Network Connection
Ethtool
-------
The driver utilizes the ethtool interface for driver configuration and
@ -490,142 +437,14 @@ Additional Configurations
The latest release of ethtool can be found from
http://sourceforge.net/projects/gkernel.
NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support
for a more complete ethtool feature set can be enabled by upgrading
ethtool to ethtool-1.8.1.
Enabling Wake on LAN* (WoL)
---------------------------
WoL is configured through the Ethtool* utility. Ethtool is included with
all versions of Red Hat after Red Hat 7.2. For other Linux distributions,
download and install Ethtool from the following website:
http://sourceforge.net/projects/gkernel.
For instructions on enabling WoL with Ethtool, refer to the website listed
above.
WoL is configured through the Ethtool* utility.
WoL will be enabled on the system during the next shut down or reboot.
For this driver version, in order to enable WoL, the e1000 driver must be
loaded when shutting down or rebooting the system.
Wake On LAN is only supported on port A for the following devices:
Intel(R) PRO/1000 PT Dual Port Network Connection
Intel(R) PRO/1000 PT Dual Port Server Connection
Intel(R) PRO/1000 PT Dual Port Server Adapter
Intel(R) PRO/1000 PF Dual Port Server Adapter
Intel(R) PRO/1000 PT Quad Port Server Adapter
NAPI
----
NAPI (Rx polling mode) is enabled in the e1000 driver.
See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
Known Issues
============
Dropped Receive Packets on Half-duplex 10/100 Networks
------------------------------------------------------
If you have an Intel PCI Express adapter running at 10mbps or 100mbps, half-
duplex, you may observe occasional dropped receive packets. There are no
workarounds for this problem in this network configuration. The network must
be updated to operate in full-duplex, and/or 1000mbps only.
Jumbo Frames System Requirement
-------------------------------
Memory allocation failures have been observed on Linux systems with 64 MB
of RAM or less that are running Jumbo Frames. If you are using Jumbo
Frames, your system may require more than the advertised minimum
requirement of 64 MB of system memory.
Performance Degradation with Jumbo Frames
-----------------------------------------
Degradation in throughput performance may be observed in some Jumbo frames
environments. If this is observed, increasing the application's socket
buffer size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values
may help. See the specific application manual and
/usr/src/linux*/Documentation/
networking/ip-sysctl.txt for more details.
Jumbo Frames on Foundry BigIron 8000 switch
-------------------------------------------
There is a known issue using Jumbo frames when connected to a Foundry
BigIron 8000 switch. This is a 3rd party limitation. If you experience
loss of packets, lower the MTU size.
Allocating Rx Buffers when Using Jumbo Frames
---------------------------------------------
Allocating Rx buffers when using Jumbo Frames on 2.6.x kernels may fail if
the available memory is heavily fragmented. This issue may be seen with PCI-X
adapters or with packet split disabled. This can be reduced or eliminated
by changing the amount of available memory for receive buffer allocation, by
increasing /proc/sys/vm/min_free_kbytes.
Multiple Interfaces on Same Ethernet Broadcast Network
------------------------------------------------------
Due to the default ARP behavior on Linux, it is not possible to have
one system on two IP networks in the same Ethernet broadcast domain
(non-partitioned switch) behave as expected. All Ethernet interfaces
will respond to IP traffic for any IP address assigned to the system.
This results in unbalanced receive traffic.
If you have multiple interfaces in a server, either turn on ARP
filtering by entering:
echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
(this only works if your kernel's version is higher than 2.4.5),
NOTE: This setting is not saved across reboots. The configuration
change can be made permanent by adding the line:
net.ipv4.conf.all.arp_filter = 1
to the file /etc/sysctl.conf
or,
install the interfaces in separate broadcast domains (either in
different switches or in a switch partitioned to VLANs).
82541/82547 can't link or are slow to link with some link partners
-----------------------------------------------------------------
There is a known compatibility issue with 82541/82547 and some
low-end switches where the link will not be established, or will
be slow to establish. In particular, these switches are known to
be incompatible with 82541/82547:
Planex FXG-08TE
I-O Data ETG-SH8
To workaround this issue, the driver can be compiled with an override
of the PHY's master/slave setting. Forcing master or forcing slave
mode will improve time-to-link.
# make CFLAGS_EXTRA=-DE1000_MASTER_SLAVE=<n>
Where <n> is:
0 = Hardware default
1 = Master mode
2 = Slave mode
3 = Auto master/slave
Disable rx flow control with ethtool
------------------------------------
In order to disable receive flow control using ethtool, you must turn
off auto-negotiation on the same command line.
For example:
ethtool -A eth? autoneg off rx off
Unplugging network cable while ethtool -p is running
----------------------------------------------------
In kernel versions 2.5.50 and later (including 2.6 kernel), unplugging
the network cable while ethtool -p is running will cause the system to
become unresponsive to keyboard commands, except for control-alt-delete.
Restarting the system appears to be the only remedy.
Support
=======

302
Documentation/networking/e1000e.txt Normal file
View File

@ -0,0 +1,302 @@
Linux* Driver for Intel(R) Network Connection
===============================================================
Intel Gigabit Linux driver.
Copyright(c) 1999 - 2010 Intel Corporation.
Contents
========
- Identifying Your Adapter
- Command Line Parameters
- Additional Configurations
- Support
Identifying Your Adapter
========================
The e1000e driver supports all PCI Express Intel(R) Gigabit Network
Connections, except those that are 82575, 82576 and 82580-based*.
* NOTE: The Intel(R) PRO/1000 P Dual Port Server Adapter is supported by
the e1000 driver, not the e1000e driver due to the 82546 part being used
behind a PCI Express bridge.
For more information on how to identify your adapter, go to the Adapter &
Driver ID Guide at:
http://support.intel.com/support/go/network/adapter/idguide.htm
For the latest Intel network drivers for Linux, refer to the following
website. In the search field, enter your adapter name or type, or use the
networking link on the left to search for your adapter:
http://support.intel.com/support/go/network/adapter/home.htm
Command Line Parameters
=======================
The default value for each parameter is generally the recommended setting,
unless otherwise noted.
NOTES: For more information about the InterruptThrottleRate,
RxIntDelay, TxIntDelay, RxAbsIntDelay, and TxAbsIntDelay
parameters, see the application note at:
http://www.intel.com/design/network/applnots/ap450.htm
InterruptThrottleRate
---------------------
Valid Range: 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
4=simplified balancing)
Default Value: 3
The driver can limit the amount of interrupts per second that the adapter
will generate for incoming packets. It does this by writing a value to the
adapter that is based on the maximum amount of interrupts that the adapter
will generate per second.
Setting InterruptThrottleRate to a value greater or equal to 100
will program the adapter to send out a maximum of that many interrupts
per second, even if more packets have come in. This reduces interrupt
load on the system and can lower CPU utilization under heavy load,
but will increase latency as packets are not processed as quickly.
The driver has two adaptive modes (setting 1 or 3) in which
it dynamically adjusts the InterruptThrottleRate value based on the traffic
that it receives. After determining the type of incoming traffic in the last
timeframe, it will adjust the InterruptThrottleRate to an appropriate value
for that traffic.
The algorithm classifies the incoming traffic every interval into
classes. Once the class is determined, the InterruptThrottleRate value is
adjusted to suit that traffic type the best. There are three classes defined:
"Bulk traffic", for large amounts of packets of normal size; "Low latency",
for small amounts of traffic and/or a significant percentage of small
packets; and "Lowest latency", for almost completely small packets or
minimal traffic.
In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
latency" or "Lowest latency" class, the InterruptThrottleRate is increased
stepwise to 20000. This default mode is suitable for most applications.
For situations where low latency is vital such as cluster or
grid computing, the algorithm can reduce latency even more when
InterruptThrottleRate is set to mode 1. In this mode, which operates
the same as mode 3, the InterruptThrottleRate will be increased stepwise to
70000 for traffic in class "Lowest latency".
In simplified mode the interrupt rate is based on the ratio of Tx and
Rx traffic. If the bytes per second rate is approximately equal the
interrupt rate will drop as low as 2000 interrupts per second. If the
traffic is mostly transmit or mostly receive, the interrupt rate could
be as high as 8000.
Setting InterruptThrottleRate to 0 turns off any interrupt moderation
and may improve small packet latency, but is generally not suitable
for bulk throughput traffic.
NOTE: InterruptThrottleRate takes precedence over the TxAbsIntDelay and
RxAbsIntDelay parameters. In other words, minimizing the receive
and/or transmit absolute delays does not force the controller to
generate more interrupts than what the Interrupt Throttle Rate
allows.
NOTE: When e1000e is loaded with default settings and multiple adapters
are in use simultaneously, the CPU utilization may increase non-
linearly. In order to limit the CPU utilization without impacting
the overall throughput, we recommend that you load the driver as
follows:
modprobe e1000e InterruptThrottleRate=3000,3000,3000
This sets the InterruptThrottleRate to 3000 interrupts/sec for
the first, second, and third instances of the driver. The range
of 2000 to 3000 interrupts per second works on a majority of
systems and is a good starting point, but the optimal value will
be platform-specific. If CPU utilization is not a concern, use
RX_POLLING (NAPI) and default driver settings.
RxIntDelay
----------
Valid Range: 0-65535 (0=off)
Default Value: 0
This value delays the generation of receive interrupts in units of 1.024
microseconds. Receive interrupt reduction can improve CPU efficiency if
properly tuned for specific network traffic. Increasing this value adds
extra latency to frame reception and can end up decreasing the throughput
of TCP traffic. If the system is reporting dropped receives, this value
may be set too high, causing the driver to run out of available receive
descriptors.
CAUTION: When setting RxIntDelay to a value other than 0, adapters may
hang (stop transmitting) under certain network conditions. If
this occurs a NETDEV WATCHDOG message is logged in the system
event log. In addition, the controller is automatically reset,
restoring the network connection. To eliminate the potential
for the hang ensure that RxIntDelay is set to 0.
RxAbsIntDelay
-------------
Valid Range: 0-65535 (0=off)
Default Value: 8
This value, in units of 1.024 microseconds, limits the delay in which a
receive interrupt is generated. Useful only if RxIntDelay is non-zero,
this value ensures that an interrupt is generated after the initial
packet is received within the set amount of time. Proper tuning,
along with RxIntDelay, may improve traffic throughput in specific network
conditions.
TxIntDelay
----------
Valid Range: 0-65535 (0=off)
Default Value: 8
This value delays the generation of transmit interrupts in units of
1.024 microseconds. Transmit interrupt reduction can improve CPU
efficiency if properly tuned for specific network traffic. If the
system is reporting dropped transmits, this value may be set too high
causing the driver to run out of available transmit descriptors.
TxAbsIntDelay
-------------
Valid Range: 0-65535 (0=off)
Default Value: 32
This value, in units of 1.024 microseconds, limits the delay in which a
transmit interrupt is generated. Useful only if TxIntDelay is non-zero,
this value ensures that an interrupt is generated after the initial
packet is sent on the wire within the set amount of time. Proper tuning,
along with TxIntDelay, may improve traffic throughput in specific
network conditions.
Copybreak
---------
Valid Range: 0-xxxxxxx (0=off)
Default Value: 256
Driver copies all packets below or equaling this size to a fresh Rx
buffer before handing it up the stack.
This parameter is different than other parameters, in that it is a
single (not 1,1,1 etc.) parameter applied to all driver instances and
it is also available during runtime at
/sys/module/e1000e/parameters/copybreak
SmartPowerDownEnable
--------------------
Valid Range: 0-1
Default Value: 0 (disabled)
Allows PHY to turn off in lower power states. The user can set this parameter
in supported chipsets.
KumeranLockLoss
---------------
Valid Range: 0-1
Default Value: 1 (enabled)
This workaround skips resetting the PHY at shutdown for the initial
silicon releases of ICH8 systems.
IntMode
-------
Valid Range: 0-2 (0=legacy, 1=MSI, 2=MSI-X)
Default Value: 2
Allows changing the interrupt mode at module load time, without requiring a
recompile. If the driver load fails to enable a specific interrupt mode, the
driver will try other interrupt modes, from least to most compatible. The
interrupt order is MSI-X, MSI, Legacy. If specifying MSI (IntMode=1)
interrupts, only MSI and Legacy will be attempted.
CrcStripping
------------
Valid Range: 0-1
Default Value: 1 (enabled)
Strip the CRC from received packets before sending up the network stack. If
you have a machine with a BMC enabled but cannot receive IPMI traffic after
loading or enabling the driver, try disabling this feature.
WriteProtectNVM
---------------
Valid Range: 0-1
Default Value: 1 (enabled)
Set the hardware to ignore all write/erase cycles to the GbE region in the
ICHx NVM (non-volatile memory). This feature can be disabled by the
WriteProtectNVM module parameter (enabled by default) only after a hardware
reset, but the machine must be power cycled before trying to enable writes.
Note: the kernel boot option iomem=relaxed may need to be set if the kernel
config option CONFIG_STRICT_DEVMEM=y, if the root user wants to write the
NVM from user space via ethtool.
Additional Configurations
=========================
Jumbo Frames
------------
Jumbo Frames support is enabled by changing the MTU to a value larger than
the default of 1500. Use the ifconfig command to increase the MTU size.
For example:
ifconfig eth<x> mtu 9000 up
This setting is not saved across reboots.
Notes:
- The maximum MTU setting for Jumbo Frames is 9216. This value coincides
with the maximum Jumbo Frames size of 9234 bytes.
- Using Jumbo Frames at 10 or 100 Mbps is not supported and may result in
poor performance or loss of link.
- Some adapters limit Jumbo Frames sized packets to a maximum of
4096 bytes and some adapters do not support Jumbo Frames.
Ethtool
-------
The driver utilizes the ethtool interface for driver configuration and
diagnostics, as well as displaying statistical information. We
strongly recommend downloading the latest version of Ethtool at:
http://sourceforge.net/projects/gkernel.
Speed and Duplex
----------------
Speed and Duplex are configured through the Ethtool* utility. For
instructions, refer to the Ethtool man page.
Enabling Wake on LAN* (WoL)
---------------------------
WoL is configured through the Ethtool* utility. For instructions on
enabling WoL with Ethtool, refer to the Ethtool man page.
WoL will be enabled on the system during the next shut down or reboot.
For this driver version, in order to enable WoL, the e1000e driver must be
loaded when shutting down or rebooting the system.
In most cases Wake On LAN is only supported on port A for multiple port
adapters. To verify if a port supports Wake on LAN run ethtool eth<X>.
Support
=======
For general information, go to the Intel support website at:
www.intel.com/support/
or the Intel Wired Networking project hosted by Sourceforge at:
http://sourceforge.net/projects/e1000
If an issue is identified with the released source code on the supported
kernel with a supported adapter, email the specific information related
to the issue to e1000-devel@lists.sf.net

40
Documentation/networking/ixgbevf.txt Executable file → Normal file
View File

@ -1,19 +1,16 @@
Linux* Base Driver for Intel(R) Network Connection
==================================================
November 24, 2009
Intel Gigabit Linux driver.
Copyright(c) 1999 - 2010 Intel Corporation.
Contents
========
- In This Release
- Identifying Your Adapter
- Known Issues/Troubleshooting
- Support
In This Release
===============
This file describes the ixgbevf Linux* Base Driver for Intel Network
Connection.
@ -33,7 +30,7 @@ Identifying Your Adapter
For more information on how to identify your adapter, go to the Adapter &
Driver ID Guide at:
http://support.intel.com/support/network/sb/CS-008441.htm
http://support.intel.com/support/go/network/adapter/idguide.htm
Known Issues/Troubleshooting
============================
@ -57,34 +54,3 @@ or the Intel Wired Networking project hosted by Sourceforge at:
If an issue is identified with the released source code on the supported
kernel with a supported adapter, email the specific information related
to the issue to e1000-devel@lists.sf.net
License
=======
Intel 10 Gigabit Linux driver.
Copyright(c) 1999 - 2009 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
Trademarks
==========
Intel, Itanium, and Pentium are trademarks or registered trademarks of
Intel Corporation or its subsidiaries in the United States and other
countries.
* Other names and brands may be claimed as the property of others.

2
Documentation/vm/page-types.c
View File

@ -478,7 +478,7 @@ static void prepare_hwpoison_fd(void)
}
if (opt_unpoison && !hwpoison_forget_fd) {
sprintf(buf, "%s/renew-pfn", hwpoison_debug_fs);
sprintf(buf, "%s/unpoison-pfn", hwpoison_debug_fs);
hwpoison_forget_fd = checked_open(buf, O_WRONLY);
}
}

60
MAINTAINERS
View File

@ -962,6 +962,23 @@ W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/mach-s3c6410/
ARM/S5P ARM ARCHITECTURES
M: Kukjin Kim <kgene.kim@samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-s5p*/
ARM/SAMSUNG S5P SERIES FIMC SUPPORT
M: Kyungmin Park <kyungmin.park@samsung.com>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
L: linux-arm-kernel@lists.infradead.org
L: linux-media@vger.kernel.org
S: Maintained
F: arch/arm/plat-s5p/dev-fimc*
F: arch/arm/plat-samsung/include/plat/*fimc*
F: drivers/media/video/s5p-fimc/
ARM/SHMOBILE ARM ARCHITECTURE
M: Paul Mundt <lethal@linux-sh.org>
M: Magnus Damm <magnus.damm@gmail.com>
@ -2537,7 +2554,7 @@ S: Supported
F: drivers/scsi/gdt*
GENERIC GPIO I2C DRIVER
M: Haavard Skinnemoen <hskinnemoen@atmel.com>
M: Haavard Skinnemoen <hskinnemoen@gmail.com>
S: Supported
F: drivers/i2c/busses/i2c-gpio.c
F: include/linux/i2c-gpio.h
@ -3065,16 +3082,27 @@ L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ixp2000/
INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe)
INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe/ixgbevf)
M: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
M: Jesse Brandeburg <jesse.brandeburg@intel.com>
M: Bruce Allan <bruce.w.allan@intel.com>
M: Alex Duyck <alexander.h.duyck@intel.com>
M: Carolyn Wyborny <carolyn.wyborny@intel.com>
M: Don Skidmore <donald.c.skidmore@intel.com>
M: Greg Rose <gregory.v.rose@intel.com>
M: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
M: Alex Duyck <alexander.h.duyck@intel.com>
M: John Ronciak <john.ronciak@intel.com>
L: e1000-devel@lists.sourceforge.net
W: http://e1000.sourceforge.net/
S: Supported
F: Documentation/networking/e100.txt
F: Documentation/networking/e1000.txt
F: Documentation/networking/e1000e.txt
F: Documentation/networking/igb.txt
F: Documentation/networking/igbvf.txt
F: Documentation/networking/ixgb.txt
F: Documentation/networking/ixgbe.txt
F: Documentation/networking/ixgbevf.txt
F: drivers/net/e100.c
F: drivers/net/e1000/
F: drivers/net/e1000e/
@ -3082,6 +3110,7 @@ F: drivers/net/igb/
F: drivers/net/igbvf/
F: drivers/net/ixgb/
F: drivers/net/ixgbe/
F: drivers/net/ixgbevf/
INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
L: linux-wireless@vger.kernel.org
@ -3790,9 +3819,8 @@ W: http://www.syskonnect.com
S: Supported
MATROX FRAMEBUFFER DRIVER
M: Petr Vandrovec <vandrove@vc.cvut.cz>
L: linux-fbdev@vger.kernel.org
S: Maintained
S: Orphan
F: drivers/video/matrox/matroxfb_*
F: include/linux/matroxfb.h
@ -3934,8 +3962,10 @@ S: Supported
F: drivers/mfd/
MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
S: Orphan
M: Chris Ball <cjb@laptop.org>
L: linux-mmc@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
S: Maintained
F: drivers/mmc/
F: include/linux/mmc/
@ -3977,8 +4007,8 @@ S: Maintained
F: drivers/net/natsemi.c
NCP FILESYSTEM
M: Petr Vandrovec <vandrove@vc.cvut.cz>
S: Maintained
M: Petr Vandrovec <petr@vandrovec.name>
S: Odd Fixes
F: fs/ncpfs/
NCR DUAL 700 SCSI DRIVER (MICROCHANNEL)
@ -5009,6 +5039,12 @@ F: drivers/media/common/saa7146*
F: drivers/media/video/*7146*
F: include/media/*7146*
SAMSUNG AUDIO (ASoC) DRIVERS
M: Jassi Brar <jassi.brar@samsung.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
F: sound/soc/s3c24xx
TLG2300 VIDEO4LINUX-2 DRIVER
M: Huang Shijie <shijie8@gmail.com>
M: Kang Yong <kangyong@telegent.com>
@ -5106,8 +5142,10 @@ S: Maintained
F: drivers/mmc/host/sdricoh_cs.c
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
S: Orphan
M: Chris Ball <cjb@laptop.org>
L: linux-mmc@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
S: Maintained
F: drivers/mmc/host/sdhci.*
SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)
@ -6449,8 +6487,10 @@ F: include/linux/wm97xx.h
WOLFSON MICROELECTRONICS DRIVERS
M: Mark Brown <broonie@opensource.wolfsonmicro.com>
M: Ian Lartey <ian@opensource.wolfsonmicro.com>
M: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
T: git git://opensource.wolfsonmicro.com/linux-2.6-asoc
T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
W: http://opensource.wolfsonmicro.com/node/8
W: http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices
S: Supported
F: Documentation/hwmon/wm83??
F: drivers/leds/leds-wm83*.c

4
Makefile
View File

@ -1,8 +1,8 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 36
EXTRAVERSION = -rc5
NAME = Sheep on Meth
EXTRAVERSION = -rc8
NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"

9
arch/alpha/kernel/entry.S
View File

@ -914,15 +914,6 @@ sys_execve:
jmp $31, do_sys_execve
.end sys_execve
.align 4
.globl osf_sigprocmask
.ent osf_sigprocmask
osf_sigprocmask:
.prologue 0
mov $sp, $18
jmp $31, sys_osf_sigprocmask
.end osf_sigprocmask
.align 4
.globl alpha_ni_syscall
.ent alpha_ni_syscall

54
arch/alpha/kernel/signal.c
View File

@ -41,46 +41,20 @@ static void do_signal(struct pt_regs *, struct switch_stack *,
/*
* The OSF/1 sigprocmask calling sequence is different from the
* C sigprocmask() sequence..
*
* how:
* 1 - SIG_BLOCK
* 2 - SIG_UNBLOCK
* 3 - SIG_SETMASK
*
* We change the range to -1 .. 1 in order to let gcc easily
* use the conditional move instructions.
*
* Note that we don't need to acquire the kernel lock for SMP
* operation, as all of this is local to this thread.
*/
SYSCALL_DEFINE3(osf_sigprocmask, int, how, unsigned long, newmask,
struct pt_regs *, regs)
SYSCALL_DEFINE2(osf_sigprocmask, int, how, unsigned long, newmask)
{
unsigned long oldmask = -EINVAL;
sigset_t oldmask;
sigset_t mask;
unsigned long res;
if ((unsigned long)how-1 <= 2) {
long sign = how-2; /* -1 .. 1 */
unsigned long block, unblock;
newmask &= _BLOCKABLE;
spin_lock_irq(&current->sighand->siglock);
oldmask = current->blocked.sig[0];
unblock = oldmask & ~newmask;
block = oldmask | newmask;
if (!sign)
block = unblock;
if (sign <= 0)
newmask = block;
if (_NSIG_WORDS > 1 && sign > 0)
sigemptyset(&current->blocked);
current->blocked.sig[0] = newmask;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
regs->r0 = 0; /* special no error return */
siginitset(&mask, newmask & _BLOCKABLE);
res = sigprocmask(how, &mask, &oldmask);
if (!res) {
force_successful_syscall_return();
res = oldmask.sig[0];
}
return oldmask;
return res;
}
SYSCALL_DEFINE3(osf_sigaction, int, sig,
@ -94,9 +68,9 @@ SYSCALL_DEFINE3(osf_sigaction, int, sig,
old_sigset_t mask;
if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
__get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
__get_user(new_ka.sa.sa_flags, &act->sa_flags))
__get_user(new_ka.sa.sa_flags, &act->sa_flags) ||
__get_user(mask, &act->sa_mask))
return -EFAULT;
__get_user(mask, &act->sa_mask);
siginitset(&new_ka.sa.sa_mask, mask);
new_ka.ka_restorer = NULL;
}
@ -106,9 +80,9 @@ SYSCALL_DEFINE3(osf_sigaction, int, sig,
if (!ret && oact) {
if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
__put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
__put_user(old_ka.sa.sa_flags, &oact->sa_flags))
__put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
return -EFAULT;
__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
}
return ret;

2
arch/alpha/kernel/systbls.S
View File

@ -58,7 +58,7 @@ sys_call_table:
.quad sys_open /* 45 */
.quad alpha_ni_syscall
.quad sys_getxgid
.quad osf_sigprocmask
.quad sys_osf_sigprocmask
.quad alpha_ni_syscall
.quad alpha_ni_syscall /* 50 */
.quad sys_acct

41
arch/arm/Kconfig
View File

@ -271,7 +271,6 @@ config ARCH_AT91
bool "Atmel AT91"
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 and AT91CAP9 processors.
@ -1051,6 +1050,32 @@ config ARM_ERRATA_460075
ACTLR register. Note that setting specific bits in the ACTLR register
may not be available in non-secure mode.
config ARM_ERRATA_742230
bool "ARM errata: DMB operation may be faulty"
depends on CPU_V7 && SMP
help
This option enables the workaround for the 742230 Cortex-A9
(r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
between two write operations may not ensure the correct visibility
ordering of the two writes. This workaround sets a specific bit in
the diagnostic register of the Cortex-A9 which causes the DMB
instruction to behave as a DSB, ensuring the correct behaviour of
the two writes.
config ARM_ERRATA_742231
bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
depends on CPU_V7 && SMP
help
This option enables the workaround for the 742231 Cortex-A9
(r2p0..r2p2) erratum. Under certain conditions, specific to the
Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
accessing some data located in the same cache line, may get corrupted
data due to bad handling of the address hazard when the line gets
replaced from one of the CPUs at the same time as another CPU is
accessing it. This workaround sets specific bits in the diagnostic
register of the Cortex-A9 which reduces the linefill issuing
capabilities of the processor.
config PL310_ERRATA_588369
bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
depends on CACHE_L2X0 && ARCH_OMAP4
@ -1076,6 +1101,20 @@ config ARM_ERRATA_720789
invalidated are not, resulting in an incoherency in the system page
tables. The workaround changes the TLB flushing routines to invalidate
entries regardless of the ASID.
config ARM_ERRATA_743622
bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
depends on CPU_V7
help
This option enables the workaround for the 743622 Cortex-A9
(r2p0..r2p2) erratum. Under very rare conditions, a faulty
optimisation in the Cortex-A9 Store Buffer may lead to data
corruption. This workaround sets a specific bit in the diagnostic
register of the Cortex-A9 which disables the Store Buffer
optimisation, preventing the defect from occurring. This has no
visible impact on the overall performance or power consumption of the
processor.
endmenu
source "arch/arm/common/Kconfig"

2
arch/arm/boot/compressed/Makefile
View File

@ -116,5 +116,5 @@ CFLAGS_font.o := -Dstatic=
$(obj)/font.c: $(FONTC)
$(call cmd,shipped)
$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config
$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile $(KCONFIG_CONFIG)
@sed "$(SEDFLAGS)" < $< > $@

4
arch/arm/include/asm/pgtable.h
View File

@ -317,6 +317,10 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
#define pgprot_dmacoherent(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE)
#define __HAVE_PHYS_MEM_ACCESS_PROT
struct file;
extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t vma_prot);
#else
#define pgprot_dmacoherent(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_UNCACHED)

2
arch/arm/kernel/entry-common.S
View File

@ -48,6 +48,8 @@ work_pending:
beq no_work_pending
mov r0, sp @ 'regs'
mov r2, why @ 'syscall'
tst r1, #_TIF_SIGPENDING @ delivering a signal?
movne why, #0 @ prevent further restarts
bl do_notify_resume
b ret_slow_syscall @ Check work again

7
arch/arm/kernel/kprobes-decode.c
View File

@ -1162,11 +1162,12 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
{
/*
* MSR : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx
* Undef : cccc 0011 0x00 xxxx xxxx xxxx xxxx xxxx
* Undef : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx
* ALU op with S bit and Rd == 15 :
* cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx
*/
if ((insn & 0x0f900000) == 0x03200000 || /* MSR & Undef */
if ((insn & 0x0fb00000) == 0x03200000 || /* MSR */
(insn & 0x0ff00000) == 0x03400000 || /* Undef */
(insn & 0x0e10f000) == 0x0210f000) /* ALU s-bit, R15 */
return INSN_REJECTED;
@ -1177,7 +1178,7 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
* *S (bit 20) updates condition codes
* ADC/SBC/RSC reads the C flag
*/
insn &= 0xfff00fff; /* Rn = r0, Rd = r0 */
insn &= 0xffff0fff; /* Rd = r0 */
asi->insn[0] = insn;
asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */
emulate_alu_imm_rwflags : emulate_alu_imm_rflags;

4
arch/arm/mach-at91/at91sam9g45_devices.c
View File

@ -426,7 +426,7 @@ static struct i2c_gpio_platform_data pdata_i2c0 = {
.sda_is_open_drain = 1,
.scl_pin = AT91_PIN_PA21,
.scl_is_open_drain = 1,
.udelay = 2, /* ~100 kHz */
.udelay = 5, /* ~100 kHz */
};
static struct platform_device at91sam9g45_twi0_device = {
@ -440,7 +440,7 @@ static struct i2c_gpio_platform_data pdata_i2c1 = {
.sda_is_open_drain = 1,
.scl_pin = AT91_PIN_PB11,
.scl_is_open_drain = 1,
.udelay = 2, /* ~100 kHz */
.udelay = 5, /* ~100 kHz */
};
static struct platform_device at91sam9g45_twi1_device = {

7
arch/arm/mach-at91/include/mach/system.h
View File

@ -28,17 +28,16 @@
static inline void arch_idle(void)
{
#ifndef CONFIG_DEBUG_KERNEL
/*
* Disable the processor clock. The processor will be automatically
* re-enabled by an interrupt or by a reset.
*/
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
#else
#ifndef CONFIG_CPU_ARM920T
/*
* Set the processor (CP15) into 'Wait for Interrupt' mode.
* Unlike disabling the processor clock via the PMC (above)
* this allows the processor to be woken via JTAG.
* Post-RM9200 processors need this in conjunction with the above
* to save power when idle.
*/
cpu_do_idle();
#endif

3
arch/arm/mach-davinci/dm355.c
View File

@ -769,8 +769,7 @@ static struct map_desc dm355_io_desc[] = {
.virtual = SRAM_VIRT,
.pfn = __phys_to_pfn(0x00010000),
.length = SZ_32K,
/* MT_MEMORY_NONCACHED requires supersection alignment */
.type = MT_DEVICE,
.type = MT_MEMORY_NONCACHED,
},
};

3
arch/arm/mach-davinci/dm365.c
View File

@ -969,8 +969,7 @@ static struct map_desc dm365_io_desc[] = {
.virtual = SRAM_VIRT,
.pfn = __phys_to_pfn(0x00010000),
.length = SZ_32K,
/* MT_MEMORY_NONCACHED requires supersection alignment */
.type = MT_DEVICE,
.type = MT_MEMORY_NONCACHED,
},
};

3
arch/arm/mach-davinci/dm644x.c
View File

@ -653,8 +653,7 @@ static struct map_desc dm644x_io_desc[] = {
.virtual = SRAM_VIRT,
.pfn = __phys_to_pfn(0x00008000),
.length = SZ_16K,
/* MT_MEMORY_NONCACHED requires supersection alignment */
.type = MT_DEVICE,
.type = MT_MEMORY_NONCACHED,
},
};

3
arch/arm/mach-davinci/dm646x.c
View File

@ -737,8 +737,7 @@ static struct map_desc dm646x_io_desc[] = {
.virtual = SRAM_VIRT,
.pfn = __phys_to_pfn(0x00010000),
.length = SZ_32K,
/* MT_MEMORY_NONCACHED requires supersection alignment */
.type = MT_DEVICE,
.type = MT_MEMORY_NONCACHED,
},
};

6
arch/arm/mach-dove/include/mach/io.h
View File

@ -13,8 +13,8 @@
#define IO_SPACE_LIMIT 0xffffffff
#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\
DOVE_PCIE0_IO_VIRT_BASE))
#define __mem_pci(a) (a)
#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_BUS_BASE) + \
DOVE_PCIE0_IO_VIRT_BASE))
#define __mem_pci(a) (a)
#endif

2
arch/arm/mach-ep93xx/dma-m2p.c
View File

@ -276,7 +276,7 @@ static void channel_disable(struct m2p_channel *ch)
v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN);
m2p_set_control(ch, v);
while (m2p_channel_state(ch) == STATE_ON)
while (m2p_channel_state(ch) >= STATE_ON)
cpu_relax();
m2p_set_control(ch, 0x0);

1
arch/arm/mach-imx/Kconfig
View File

@ -122,6 +122,7 @@ config MACH_CPUIMX27
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
select MXC_ULPI if USB_ULPI
help
Include support for Eukrea CPUIMX27 platform. This includes
specific configurations for the module and its peripherals.

2
arch/arm/mach-imx/mach-cpuimx27.c
View File

@ -259,7 +259,7 @@ static void __init eukrea_cpuimx27_init(void)
i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
imx27_add_i2c_imx1(&cpuimx27_i2c1_data);
imx27_add_i2c_imx0(&cpuimx27_i2c1_data);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));

2
arch/arm/mach-kirkwood/include/mach/kirkwood.h
View File

@ -38,7 +38,7 @@
#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000
#define KIRKWOOD_PCIE1_IO_VIRT_BASE 0xfef00000
#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00000000
#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00100000
#define KIRKWOOD_PCIE1_IO_SIZE SZ_1M
#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000

4
arch/arm/mach-kirkwood/pcie.c
View File

@ -117,7 +117,7 @@ static void __init pcie0_ioresources_init(struct pcie_port *pp)
* IORESOURCE_IO
*/
pp->res[0].name = "PCIe 0 I/O Space";
pp->res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
pp->res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
pp->res[0].flags = IORESOURCE_IO;
@ -139,7 +139,7 @@ static void __init pcie1_ioresources_init(struct pcie_port *pp)
* IORESOURCE_IO
*/
pp->res[0].name = "PCIe 1 I/O Space";
pp->res[0].start = KIRKWOOD_PCIE1_IO_PHYS_BASE;
pp->res[0].start = KIRKWOOD_PCIE1_IO_BUS_BASE;
pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1;
pp->res[0].flags = IORESOURCE_IO;

7
arch/arm/mach-mmp/include/mach/system.h
View File

@ -9,6 +9,8 @@
#ifndef __ASM_MACH_SYSTEM_H
#define __ASM_MACH_SYSTEM_H
#include <mach/cputype.h>
static inline void arch_idle(void)
{
cpu_do_idle();
@ -16,6 +18,9 @@ static inline void arch_idle(void)
static inline void arch_reset(char mode, const char *cmd)
{
cpu_reset(0);
if (cpu_is_pxa168())
cpu_reset(0xffff0000);
else
cpu_reset(0);
}
#endif /* __ASM_MACH_SYSTEM_H */

3
arch/arm/mach-pxa/cpufreq-pxa2xx.c
View File

@ -312,8 +312,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
freqs.cpu = policy->cpu;
if (freq_debug)
pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, "
"(SDRAM %d Mhz)\n",
pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
(new_freq_mem / 2000) : (new_freq_mem / 1000));

12
arch/arm/mach-pxa/include/mach/hardware.h
View File

@ -264,23 +264,35 @@
* <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
* == 0x3 for pxa300/pxa310/pxa320
*/
#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
#define __cpu_is_pxa2xx(id) \
({ \
unsigned int _id = (id) >> 13 & 0x7; \
_id <= 0x2; \
})
#else
#define __cpu_is_pxa2xx(id) (0)
#endif
#ifdef CONFIG_PXA3xx
#define __cpu_is_pxa3xx(id) \
({ \
unsigned int _id = (id) >> 13 & 0x7; \
_id == 0x3; \
})
#else
#define __cpu_is_pxa3xx(id) (0)
#endif
#if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935)
#define __cpu_is_pxa93x(id) \
({ \
unsigned int _id = (id) >> 4 & 0xfff; \
_id == 0x683 || _id == 0x693; \
})
#else
#define __cpu_is_pxa93x(id) (0)
#endif
#define cpu_is_pxa2xx() \
({ \

6
arch/arm/mach-pxa/palm27x.c
View File

@ -469,9 +469,13 @@ static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = {
},
};
static struct i2c_pxa_platform_data palm27x_i2c_power_info = {
.use_pio = 1,
};
void __init palm27x_pmic_init(void)
{
i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info));
pxa27x_set_i2c_power_info(NULL);
pxa27x_set_i2c_power_info(&palm27x_i2c_power_info);
}
#endif

1
arch/arm/mach-pxa/vpac270.c
View File

@ -240,6 +240,7 @@ static void __init vpac270_onenand_init(void) {}
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
static struct pxamci_platform_data vpac270_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.gpio_power = -1,
.gpio_card_detect = GPIO53_VPAC270_SD_DETECT_N,
.gpio_card_ro = GPIO52_VPAC270_SD_READONLY,
.detect_delay_ms = 200,

1
arch/arm/mach-s5p6440/cpu.c
View File

@ -19,6 +19,7 @@
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

1
arch/arm/mach-s5p6442/cpu.c
View File

@ -19,6 +19,7 @@
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

1
arch/arm/mach-s5pc100/cpu.c
View File

@ -21,6 +21,7 @@
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

5
arch/arm/mach-s5pv210/clock.c
View File

@ -173,11 +173,6 @@ static int s5pv210_clk_ip3_ctrl(struct clk *clk, int enable)
return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
}
static int s5pv210_clk_ip4_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP4, clk, enable);
}
static int s5pv210_clk_mask0_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable);

1
arch/arm/mach-s5pv210/cpu.c
View File

@ -19,6 +19,7 @@
#include <linux/io.h>
#include <linux/sysdev.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

3
arch/arm/mach-u300/include/mach/gpio.h
View File

@ -273,6 +273,9 @@ extern void gpio_pullup(unsigned gpio, int value);
extern int gpio_get_value(unsigned gpio);
extern void gpio_set_value(unsigned gpio, int value);
#define gpio_get_value_cansleep gpio_get_value
#define gpio_set_value_cansleep gpio_set_value
/* wrappers to sleep-enable the previous two functions */
static inline unsigned gpio_to_irq(unsigned gpio)
{

12
arch/arm/mach-vexpress/ct-ca9x4.c
View File

@ -68,7 +68,7 @@ static void __init ct_ca9x4_init_irq(void)
}
#if 0
static void ct_ca9x4_timer_init(void)
static void __init ct_ca9x4_timer_init(void)
{
writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL);
writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL);
@ -222,12 +222,18 @@ static struct platform_device pmu_device = {
.resource = pmu_resources,
};
static void ct_ca9x4_init(void)
static void __init ct_ca9x4_init(void)
{
int i;
#ifdef CONFIG_CACHE_L2X0
l2x0_init(MMIO_P2V(CT_CA9X4_L2CC), 0x00000000, 0xfe0fffff);
void __iomem *l2x0_base = MMIO_P2V(CT_CA9X4_L2CC);
/* set RAM latencies to 1 cycle for this core tile. */
writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
#endif
clkdev_add_table(lookups, ARRAY_SIZE(lookups));

2
arch/arm/mach-vexpress/v2m.c
View File

@ -48,7 +48,7 @@ void __init v2m_map_io(struct map_desc *tile, size_t num)
}
static void v2m_timer_init(void)
static void __init v2m_timer_init(void)
{
writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL);
writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL);

19
arch/arm/mm/alignment.c
View File

@ -885,8 +885,23 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
if (ai_usermode & UM_SIGNAL)
force_sig(SIGBUS, current);
else
set_cr(cr_no_alignment);
else {
/*
* We're about to disable the alignment trap and return to
* user space. But if an interrupt occurs before actually
* reaching user space, then the IRQ vector entry code will
* notice that we were still in kernel space and therefore
* the alignment trap won't be re-enabled in that case as it
* is presumed to be always on from kernel space.
* Let's prevent that race by disabling interrupts here (they
* are disabled on the way back to user space anyway in
* entry-common.S) and disable the alignment trap only if
* there is no work pending for this thread.
*/
raw_local_irq_disable();
if (!(current_thread_info()->flags & _TIF_WORK_MASK))
set_cr(cr_no_alignment);
}
return 0;
}

8
arch/arm/mm/ioremap.c
View File

@ -204,8 +204,12 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
/*
* Don't allow RAM to be mapped - this causes problems with ARMv6+
*/
if (WARN_ON(pfn_valid(pfn)))
return NULL;
if (pfn_valid(pfn)) {
printk(KERN_WARNING "BUG: Your driver calls ioremap() on system memory. This leads\n"
KERN_WARNING "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
KERN_WARNING "will fail in the next kernel release. Please fix your driver.\n");
WARN_ON(1);
}
type = get_mem_type(mtype);
if (!type)

31
arch/arm/mm/mmu.c
View File

@ -15,6 +15,7 @@
#include <linux/nodemask.h>
#include <linux/memblock.h>
#include <linux/sort.h>
#include <linux/fs.h>
#include <asm/cputype.h>
#include <asm/sections.h>
@ -246,6 +247,9 @@ static struct mem_type mem_types[] = {
.domain = DOMAIN_USER,
},
[MT_MEMORY] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_WRITE | L_PTE_EXEC,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
.domain = DOMAIN_KERNEL,
},
@ -254,6 +258,9 @@ static struct mem_type mem_types[] = {
.domain = DOMAIN_KERNEL,
},
[MT_MEMORY_NONCACHED] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_WRITE | L_PTE_EXEC | L_PTE_MT_BUFFERABLE,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
.domain = DOMAIN_KERNEL,
},
@ -411,9 +418,12 @@ static void __init build_mem_type_table(void)
* Enable CPU-specific coherency if supported.
* (Only available on XSC3 at the moment.)
*/
if (arch_is_coherent() && cpu_is_xsc3())
if (arch_is_coherent() && cpu_is_xsc3()) {
mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
}
/*
* ARMv6 and above have extended page tables.
*/
@ -438,7 +448,9 @@ static void __init build_mem_type_table(void)
mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
#endif
}
@ -475,6 +487,8 @@ static void __init build_mem_type_table(void)
mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd;
mem_types[MT_MEMORY].prot_pte |= kern_pgprot;
mem_types[MT_MEMORY_NONCACHED].prot_sect |= ecc_mask;
mem_types[MT_ROM].prot_sect |= cp->pmd;
switch (cp->pmd) {
@ -498,6 +512,19 @@ static void __init build_mem_type_table(void)
}
}
#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t vma_prot)
{
if (!pfn_valid(pfn))
return pgprot_noncached(vma_prot);
else if (file->f_flags & O_SYNC)
return pgprot_writecombine(vma_prot);
return vma_prot;
}
EXPORT_SYMBOL(phys_mem_access_prot);
#endif
#define vectors_base() (vectors_high() ? 0xffff0000 : 0)
static void __init *early_alloc(unsigned long sz)

70
arch/arm/mm/proc-v7.S
View File

@ -186,13 +186,14 @@ cpu_v7_name:
* It is assumed that:
* - cache type register is implemented
*/
__v7_setup:
__v7_ca9mp_setup:
#ifdef CONFIG_SMP
mrc p15, 0, r0, c1, c0, 1
tst r0, #(1 << 6) @ SMP/nAMP mode enabled?
orreq r0, r0, #(1 << 6) | (1 << 0) @ Enable SMP/nAMP mode and
mcreq p15, 0, r0, c1, c0, 1 @ TLB ops broadcasting
#endif
__v7_setup:
adr r12, __v7_setup_stack @ the local stack
stmia r12, {r0-r5, r7, r9, r11, lr}
bl v7_flush_dcache_all
@ -201,11 +202,16 @@ __v7_setup:
mrc p15, 0, r0, c0, c0, 0 @ read main ID register
and r10, r0, #0xff000000 @ ARM?
teq r10, #0x41000000
bne 2f
bne 3f
and r5, r0, #0x00f00000 @ variant
and r6, r0, #0x0000000f @ revision
orr r0, r6, r5, lsr #20-4 @ combine variant and revision
orr r6, r6, r5, lsr #20-4 @ combine variant and revision
ubfx r0, r0, #4, #12 @ primary part number
/* Cortex-A8 Errata */
ldr r10, =0x00000c08 @ Cortex-A8 primary part number
teq r0, r10
bne 2f
#ifdef CONFIG_ARM_ERRATA_430973
teq r5, #0x00100000 @ only present in r1p*
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
@ -213,21 +219,50 @@ __v7_setup:
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_458693
teq r0, #0x20 @ only present in r2p0
teq r6, #0x20 @ only present in r2p0
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
orreq r10, r10, #(1 << 5) @ set L1NEON to 1
orreq r10, r10, #(1 << 9) @ set PLDNOP to 1
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_460075
teq r0, #0x20 @ only present in r2p0
teq r6, #0x20 @ only present in r2p0
mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
tsteq r10, #1 << 22
orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit
mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
#endif
b 3f
2: mov r10, #0
/* Cortex-A9 Errata */
2: ldr r10, =0x00000c09 @ Cortex-A9 primary part number
teq r0, r10
bne 3f
#ifdef CONFIG_ARM_ERRATA_742230
cmp r6, #0x22 @ only present up to r2p2
mrcle p15, 0, r10, c15, c0, 1 @ read diagnostic register
orrle r10, r10, #1 << 4 @ set bit #4
mcrle p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_742231
teq r6, #0x20 @ present in r2p0
teqne r6, #0x21 @ present in r2p1
teqne r6, #0x22 @ present in r2p2
mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
orreq r10, r10, #1 << 12 @ set bit #12
orreq r10, r10, #1 << 22 @ set bit #22
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_743622
teq r6, #0x20 @ present in r2p0
teqne r6, #0x21 @ present in r2p1
teqne r6, #0x22 @ present in r2p2
mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
orreq r10, r10, #1 << 6 @ set bit #6
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
3: mov r10, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
#endif
@ -323,6 +358,29 @@ cpu_elf_name:
.section ".proc.info.init", #alloc, #execinstr
.type __v7_ca9mp_proc_info, #object
__v7_ca9mp_proc_info:
.long 0x410fc090 @ Required ID value
.long 0xff0ffff0 @ Mask for ID
.long PMD_TYPE_SECT | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ | \
PMD_FLAGS
.long PMD_TYPE_SECT | \
PMD_SECT_XN | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
b __v7_ca9mp_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
.long cpu_v7_name
.long v7_processor_functions
.long v7wbi_tlb_fns
.long v6_user_fns
.long v7_cache_fns
.size __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
/*
* Match any ARMv7 processor core.
*/

7
arch/arm/oprofile/common.c
View File

@ -102,6 +102,7 @@ static int op_create_counter(int cpu, int event)
if (IS_ERR(pevent)) {
ret = PTR_ERR(pevent);
} else if (pevent->state != PERF_EVENT_STATE_ACTIVE) {
perf_event_release_kernel(pevent);
pr_warning("oprofile: failed to enable event %d "
"on CPU %d\n", event, cpu);
ret = -EBUSY;
@ -365,6 +366,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
ret = init_driverfs();
if (ret) {
kfree(counter_config);
counter_config = NULL;
return ret;
}
@ -402,7 +404,6 @@ void oprofile_arch_exit(void)
struct perf_event *event;
if (*perf_events) {
exit_driverfs();
for_each_possible_cpu(cpu) {
for (id = 0; id < perf_num_counters; ++id) {
event = perf_events[cpu][id];
@ -413,8 +414,10 @@ void oprofile_arch_exit(void)
}
}
if (counter_config)
if (counter_config) {
kfree(counter_config);
exit_driverfs();
}
}
#else
int __init oprofile_arch_init(struct oprofile_operations *ops)

33
arch/arm/plat-nomadik/timer.c
View File

@ -1,5 +1,5 @@
/*
* linux/arch/arm/mach-nomadik/timer.c
* linux/arch/arm/plat-nomadik/timer.c
*
* Copyright (C) 2008 STMicroelectronics
* Copyright (C) 2010 Alessandro Rubini
@ -75,7 +75,7 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode,
cr = readl(mtu_base + MTU_CR(1));
writel(0, mtu_base + MTU_LR(1));
writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1));
writel(0x2, mtu_base + MTU_IMSC);
writel(1 << 1, mtu_base + MTU_IMSC);
break;
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_UNUSED:
@ -131,25 +131,23 @@ void __init nmdk_timer_init(void)
{
unsigned long rate;
struct clk *clk0;
struct clk *clk1;
u32 cr;
u32 cr = MTU_CRn_32BITS;
clk0 = clk_get_sys("mtu0", NULL);
BUG_ON(IS_ERR(clk0));
clk1 = clk_get_sys("mtu1", NULL);
BUG_ON(IS_ERR(clk1));
clk_enable(clk0);
clk_enable(clk1);
/*
* Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
* use a divide-by-16 counter if it's more than 16MHz
* Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
* for ux500.
* Use a divide-by-16 counter if the tick rate is more than 32MHz.
* At 32 MHz, the timer (with 32 bit counter) can be programmed
* to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer
* with 16 gives too low timer resolution.
*/
cr = MTU_CRn_32BITS;;
rate = clk_get_rate(clk0);
if (rate > 16 << 20) {
if (rate > 32000000) {
rate /= 16;
cr |= MTU_CRn_PRESCALE_16;
} else {
@ -170,15 +168,8 @@ void __init nmdk_timer_init(void)
pr_err("timer: failed to initialize clock source %s\n",
nmdk_clksrc.name);
/* Timer 1 is used for events, fix according to rate */
cr = MTU_CRn_32BITS;
rate = clk_get_rate(clk1);
if (rate > 16 << 20) {
rate /= 16;
cr |= MTU_CRn_PRESCALE_16;
} else {
cr |= MTU_CRn_PRESCALE_1;
}
/* Timer 1 is used for events */
clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */

2
arch/arm/plat-omap/Kconfig
View File

@ -33,7 +33,7 @@ config OMAP_DEBUG_DEVICES
config OMAP_DEBUG_LEDS
bool
depends on OMAP_DEBUG_DEVICES
default y if LEDS
default y if LEDS_CLASS
config OMAP_RESET_CLOCKS
bool "Reset unused clocks during boot"

1
arch/arm/plat-omap/iommu.c
View File

@ -320,6 +320,7 @@ void flush_iotlb_page(struct iommu *obj, u32 da)
if ((start <= da) && (da < start + bytes)) {
dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
__func__, start, da, bytes);
iotlb_load_cr(obj, &cr);
iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
}
}

2
arch/arm/plat-omap/mcbsp.c
View File

@ -156,7 +156,7 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
/* Writing zero to RSYNC_ERR clears the IRQ */
MCBSP_WRITE(mcbsp_rx, SPCR1, MCBSP_READ_CACHE(mcbsp_rx, SPCR1));
} else {
complete(&mcbsp_rx->tx_irq_completion);
complete(&mcbsp_rx->rx_irq_completion);
}
return IRQ_HANDLED;

25
arch/arm/plat-omap/sram.c
View File

@ -220,20 +220,7 @@ void __init omap_map_sram(void)
if (omap_sram_size == 0)
return;
if (cpu_is_omap24xx()) {
omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA;
base = OMAP2_SRAM_PA;
base = ROUND_DOWN(base, PAGE_SIZE);
omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
}
if (cpu_is_omap34xx()) {
omap_sram_io_desc[0].virtual = OMAP3_SRAM_VA;
base = OMAP3_SRAM_PA;
base = ROUND_DOWN(base, PAGE_SIZE);
omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
/*
* SRAM must be marked as non-cached on OMAP3 since the
* CORE DPLL M2 divider change code (in SRAM) runs with the
@ -244,13 +231,11 @@ void __init omap_map_sram(void)
omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
}
if (cpu_is_omap44xx()) {
omap_sram_io_desc[0].virtual = OMAP4_SRAM_VA;
base = OMAP4_SRAM_PA;
base = ROUND_DOWN(base, PAGE_SIZE);
omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
}
omap_sram_io_desc[0].length = 1024 * 1024; /* Use section desc */
omap_sram_io_desc[0].virtual = omap_sram_base;
base = omap_sram_start;
base = ROUND_DOWN(base, PAGE_SIZE);
omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE);
iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",

1
arch/arm/plat-samsung/adc.c
View File

@ -435,7 +435,6 @@ static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state)
static int s3c_adc_resume(struct platform_device *pdev)
{
struct adc_device *adc = platform_get_drvdata(pdev);
unsigned long flags;
clk_enable(adc->clk);
enable_irq(adc->irq);

27
arch/arm/plat-samsung/clock.c
View File

@ -48,6 +48,9 @@
#include <plat/clock.h>
#include <plat/cpu.h>
#include <linux/serial_core.h>
#include <plat/regs-serial.h> /* for s3c24xx_uart_devs */
/* clock information */
static LIST_HEAD(clocks);
@ -65,6 +68,28 @@ static int clk_null_enable(struct clk *clk, int enable)
return 0;
}
static int dev_is_s3c_uart(struct device *dev)
{
struct platform_device **pdev = s3c24xx_uart_devs;
int i;
for (i = 0; i < ARRAY_SIZE(s3c24xx_uart_devs); i++, pdev++)
if (*pdev && dev == &(*pdev)->dev)
return 1;
return 0;
}
/*
* Serial drivers call get_clock() very early, before platform bus
* has been set up, this requires a special check to let them get
* a proper clock
*/
static int dev_is_platform_device(struct device *dev)
{
return dev->bus == &platform_bus_type ||
(dev->bus == NULL && dev_is_s3c_uart(dev));
}
/* Clock API calls */
struct clk *clk_get(struct device *dev, const char *id)
@ -73,7 +98,7 @@ struct clk *clk_get(struct device *dev, const char *id)
struct clk *clk = ERR_PTR(-ENOENT);
int idno;
if (dev == NULL || dev->bus != &platform_bus_type)
if (dev == NULL || !dev_is_platform_device(dev))
idno = -1;
else
idno = to_platform_device(dev)->id;

3
arch/avr32/kernel/module.c
View File

@ -314,10 +314,9 @@ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
vfree(module->arch.syminfo);
module->arch.syminfo = NULL;
return module_bug_finalize(hdr, sechdrs, module);
return 0;
}
void module_arch_cleanup(struct module *module)
{
module_bug_cleanup(module);
}

3
arch/h8300/kernel/module.c
View File

@ -112,10 +112,9 @@ int module_finalize(const Elf_Ehdr *hdr,
const Elf_Shdr *sechdrs,
struct module *me)
{
return module_bug_finalize(hdr, sechdrs, me);
return 0;
}
void module_arch_cleanup(struct module *mod)
{
module_bug_cleanup(mod);
}

4
arch/m32r/include/asm/elf.h
View File

@ -82,9 +82,9 @@ typedef elf_fpreg_t elf_fpregset_t;
* These are used to set parameters in the core dumps.
*/
#define ELF_CLASS ELFCLASS32
#if defined(__LITTLE_ENDIAN)
#if defined(__LITTLE_ENDIAN__)
#define ELF_DATA ELFDATA2LSB
#elif defined(__BIG_ENDIAN)
#elif defined(__BIG_ENDIAN__)
#define ELF_DATA ELFDATA2MSB
#else
#error no endian defined

1
arch/m32r/kernel/.gitignore vendored Normal file
View File

@ -0,0 +1 @@
vmlinux.lds

4
arch/m32r/kernel/signal.c
View File

@ -28,6 +28,8 @@
#define DEBUG_SIG 0
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
asmlinkage int
sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
unsigned long r2, unsigned long r3, unsigned long r4,
@ -254,7 +256,7 @@ give_sigsegv:
static int prev_insn(struct pt_regs *regs)
{
u16 inst;
if (get_user(&inst, (u16 __user *)(regs->bpc - 2)))
if (get_user(inst, (u16 __user *)(regs->bpc - 2)))
return -EFAULT;
if ((inst & 0xfff0) == 0x10f0) /* trap ? */
regs->bpc -= 2;

6
arch/m68k/mac/macboing.c
View File

@ -162,7 +162,7 @@ static void mac_init_asc( void )
void mac_mksound( unsigned int freq, unsigned int length )
{
__u32 cfreq = ( freq << 5 ) / 468;
__u32 flags;
unsigned long flags;
int i;
if ( mac_special_bell == NULL )
@ -224,7 +224,7 @@ static void mac_nosound( unsigned long ignored )
*/
static void mac_quadra_start_bell( unsigned int freq, unsigned int length, unsigned int volume )
{
__u32 flags;
unsigned long flags;
/* if the bell is already ringing, ring longer */
if ( mac_bell_duration > 0 )
@ -271,7 +271,7 @@ static void mac_quadra_start_bell( unsigned int freq, unsigned int length, unsig
static void mac_quadra_ring_bell( unsigned long ignored )
{
int i, count = mac_asc_samplespersec / HZ;
__u32 flags;
unsigned long flags;
/*
* we neither want a sound buffer overflow nor underflow, so we need to match

21
arch/mips/Kconfig
View File

@ -13,6 +13,7 @@ config MIPS
select HAVE_KPROBES
select HAVE_KRETPROBES
select RTC_LIB if !MACH_LOONGSON
select GENERIC_ATOMIC64 if !64BIT
mainmenu "Linux/MIPS Kernel Configuration"
@ -1646,8 +1647,16 @@ config MIPS_MT_SMP
select SYS_SUPPORTS_SMP
select SMP_UP
help
This is a kernel model which is also known a VSMP or lately
has been marketesed into SMVP.
This is a kernel model which is known a VSMP but lately has been
marketesed into SMVP.
Virtual SMP uses the processor's VPEs to implement virtual
processors. In currently available configuration of the 34K processor
this allows for a dual processor. Both processors will share the same
primary caches; each will obtain the half of the TLB for it's own
exclusive use. For a layman this model can be described as similar to
what Intel calls Hyperthreading.
For further information see http://www.linux-mips.org/wiki/34K#VSMP
config MIPS_MT_SMTC
bool "SMTC: Use all TCs on all VPEs for SMP"
@ -1664,6 +1673,14 @@ config MIPS_MT_SMTC
help
This is a kernel model which is known a SMTC or lately has been
marketesed into SMVP.
is presenting the available TC's of the core as processors to Linux.
On currently available 34K processors this means a Linux system will
see up to 5 processors. The implementation of the SMTC kernel differs
significantly from VSMP and cannot efficiently coexist in the same
kernel binary so the choice between VSMP and SMTC is a compile time
decision.
For further information see http://www.linux-mips.org/wiki/34K#SMTC
endchoice

5
arch/mips/alchemy/common/prom.c
View File

@ -43,7 +43,7 @@ int prom_argc;
char **prom_argv;
char **prom_envp;
void prom_init_cmdline(void)
void __init prom_init_cmdline(void)
{
int i;
@ -104,7 +104,7 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str)
}
}
int prom_get_ethernet_addr(char *ethernet_addr)
int __init prom_get_ethernet_addr(char *ethernet_addr)
{
char *ethaddr_str;
@ -123,7 +123,6 @@ int prom_get_ethernet_addr(char *ethernet_addr)
return 0;
}
EXPORT_SYMBOL(prom_get_ethernet_addr);
void __init prom_free_prom_memory(void)
{

2
arch/mips/boot/compressed/Makefile
View File

@ -59,7 +59,7 @@ $(obj)/piggy.o: $(obj)/dummy.o $(obj)/vmlinux.bin.z FORCE
hostprogs-y := calc_vmlinuz_load_addr
VMLINUZ_LOAD_ADDRESS = $(shell $(obj)/calc_vmlinuz_load_addr \
$(objtree)/$(KBUILD_IMAGE) $(VMLINUX_LOAD_ADDRESS))
$(obj)/vmlinux.bin $(VMLINUX_LOAD_ADDRESS))
vmlinuzobjs-y += $(obj)/piggy.o

4
arch/mips/cavium-octeon/Kconfig
View File

@ -83,3 +83,7 @@ config ARCH_SPARSEMEM_ENABLE
def_bool y
select SPARSEMEM_STATIC
depends on CPU_CAVIUM_OCTEON
config CAVIUM_OCTEON_HELPER
def_bool y
depends on OCTEON_ETHERNET || PCI

2
arch/mips/cavium-octeon/cpu.c
View File

@ -41,7 +41,7 @@ static int cnmips_cu2_call(struct notifier_block *nfb, unsigned long action,
return NOTIFY_OK; /* Let default notifier send signals */
}
static int cnmips_cu2_setup(void)
static int __init cnmips_cu2_setup(void)
{
return cu2_notifier(cnmips_cu2_call, 0);
}

2
arch/mips/cavium-octeon/executive/Makefile
View File

@ -11,4 +11,4 @@
obj-y += cvmx-bootmem.o cvmx-l2c.o cvmx-sysinfo.o octeon-model.o
obj-$(CONFIG_PCI) += cvmx-helper-errata.o cvmx-helper-jtag.o
obj-$(CONFIG_CAVIUM_OCTEON_HELPER) += cvmx-helper-errata.o cvmx-helper-jtag.o

4
arch/mips/include/asm/atomic.h
View File

@ -782,6 +782,10 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
*/
#define atomic64_add_negative(i, v) (atomic64_add_return(i, (v)) < 0)
#else /* !CONFIG_64BIT */
#include <asm-generic/atomic64.h>
#endif /* CONFIG_64BIT */
/*

2
arch/mips/include/asm/cop2.h
View File

@ -24,7 +24,7 @@ extern int cu2_notifier_call_chain(unsigned long val, void *v);
#define cu2_notifier(fn, pri) \
({ \
static struct notifier_block fn##_nb __cpuinitdata = { \
static struct notifier_block fn##_nb = { \
.notifier_call = fn, \
.priority = pri \
}; \

1
arch/mips/include/asm/gic.h
View File

@ -321,6 +321,7 @@ struct gic_intrmask_regs {
*/
struct gic_intr_map {
unsigned int cpunum; /* Directed to this CPU */
#define GIC_UNUSED 0xdead /* Dummy data */
unsigned int pin; /* Directed to this Pin */
unsigned int polarity; /* Polarity : +/- */
unsigned int trigtype; /* Trigger : Edge/Levl */

2
arch/mips/include/asm/mach-tx49xx/kmalloc.h
View File

@ -1,6 +1,6 @@
#ifndef __ASM_MACH_TX49XX_KMALLOC_H
#define __ASM_MACH_TX49XX_KMALLOC_H
#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
#endif /* __ASM_MACH_TX49XX_KMALLOC_H */

3
arch/mips/include/asm/mips-boards/maltaint.h
View File

@ -88,9 +88,6 @@
#define GIC_EXT_INTR(x) x
/* Dummy data */
#define X 0xdead
/* External Interrupts used for IPI */
#define GIC_IPI_EXT_INTR_RESCHED_VPE0 16
#define GIC_IPI_EXT_INTR_CALLFNC_VPE0 17

14
arch/mips/include/asm/page.h
View File

@ -150,6 +150,20 @@ typedef struct { unsigned long pgprot; } pgprot_t;
((unsigned long)(x) - PAGE_OFFSET + PHYS_OFFSET)
#endif
#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET - PHYS_OFFSET))
/*
* RELOC_HIDE was originally added by 6007b903dfe5f1d13e0c711ac2894bdd4a61b1ad
* (lmo) rsp. 8431fd094d625b94d364fe393076ccef88e6ce18 (kernel.org). The
* discussion can be found in lkml posting
* <a2ebde260608230500o3407b108hc03debb9da6e62c@mail.gmail.com> which is
* archived at http://lists.linuxcoding.com/kernel/2006-q3/msg17360.html
*
* It is unclear if the misscompilations mentioned in
* http://lkml.org/lkml/2010/8/8/138 also affect MIPS so we keep this one
* until GCC 3.x has been retired before we can apply
* https://patchwork.linux-mips.org/patch/1541/
*/
#define __pa_symbol(x) __pa(RELOC_HIDE((unsigned long)(x), 0))
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)

1
arch/mips/include/asm/siginfo.h
View File

@ -88,6 +88,7 @@ typedef struct siginfo {
#ifdef __ARCH_SI_TRAPNO
int _trapno; /* TRAP # which caused the signal */
#endif
short _addr_lsb;
} _sigfault;
/* SIGPOLL, SIGXFSZ (To do ...) */

3
arch/mips/include/asm/thread_info.h
View File

@ -146,7 +146,8 @@ register struct thread_info *__current_thread_info __asm__("$28");
#define _TIF_LOAD_WATCH (1<<TIF_LOAD_WATCH)
/* work to do on interrupt/exception return */
#define _TIF_WORK_MASK (0x0000ffef & ~_TIF_SECCOMP)
#define _TIF_WORK_MASK (0x0000ffef & \
~(_TIF_SECCOMP | _TIF_SYSCALL_AUDIT))
/* work to do on any return to u-space */
#define _TIF_ALLWORK_MASK (0x8000ffff & ~_TIF_SECCOMP)

21
arch/mips/include/asm/unistd.h
View File

@ -356,16 +356,19 @@
#define __NR_perf_event_open (__NR_Linux + 333)
#define __NR_accept4 (__NR_Linux + 334)
#define __NR_recvmmsg (__NR_Linux + 335)
#define __NR_fanotify_init (__NR_Linux + 336)
#define __NR_fanotify_mark (__NR_Linux + 337)
#define __NR_prlimit64 (__NR_Linux + 338)
/*
* Offset of the last Linux o32 flavoured syscall
*/
#define __NR_Linux_syscalls 335
#define __NR_Linux_syscalls 338
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
#define __NR_O32_Linux_syscalls 335
#define __NR_O32_Linux_syscalls 338
#if _MIPS_SIM == _MIPS_SIM_ABI64
@ -668,16 +671,19 @@
#define __NR_perf_event_open (__NR_Linux + 292)
#define __NR_accept4 (__NR_Linux + 293)
#define __NR_recvmmsg (__NR_Linux + 294)
#define __NR_fanotify_init (__NR_Linux + 295)
#define __NR_fanotify_mark (__NR_Linux + 296)
#define __NR_prlimit64 (__NR_Linux + 297)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
#define __NR_Linux_syscalls 294
#define __NR_Linux_syscalls 297
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
#define __NR_64_Linux_syscalls 294
#define __NR_64_Linux_syscalls 297
#if _MIPS_SIM == _MIPS_SIM_NABI32
@ -985,16 +991,19 @@
#define __NR_accept4 (__NR_Linux + 297)
#define __NR_recvmmsg (__NR_Linux + 298)
#define __NR_getdents64 (__NR_Linux + 299)
#define __NR_fanotify_init (__NR_Linux + 300)
#define __NR_fanotify_mark (__NR_Linux + 301)
#define __NR_prlimit64 (__NR_Linux + 302)
/*
* Offset of the last N32 flavoured syscall
*/
#define __NR_Linux_syscalls 299
#define __NR_Linux_syscalls 302
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
#define __NR_N32_Linux_syscalls 299
#define __NR_N32_Linux_syscalls 302
#ifdef __KERNEL__

5
arch/mips/kernel/irq-gic.c
View File

@ -7,7 +7,6 @@
#include <asm/io.h>
#include <asm/gic.h>
#include <asm/gcmpregs.h>
#include <asm/mips-boards/maltaint.h>
#include <asm/irq.h>
#include <linux/hardirq.h>
#include <asm-generic/bitops/find.h>
@ -131,7 +130,7 @@ static int gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
int i;
irq -= _irqbase;
pr_debug(KERN_DEBUG "%s(%d) called\n", __func__, irq);
pr_debug("%s(%d) called\n", __func__, irq);
cpumask_and(&tmp, cpumask, cpu_online_mask);
if (cpus_empty(tmp))
return -1;
@ -222,7 +221,7 @@ static void __init gic_basic_init(int numintrs, int numvpes,
/* Setup specifics */
for (i = 0; i < mapsize; i++) {
cpu = intrmap[i].cpunum;
if (cpu == X)
if (cpu == GIC_UNUSED)
continue;
if (cpu == 0 && i != 0 && intrmap[i].flags == 0)
continue;

2
arch/mips/kernel/kgdb.c
View File

@ -283,7 +283,7 @@ static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd,
struct pt_regs *regs = args->regs;
int trap = (regs->cp0_cause & 0x7c) >> 2;
/* Userpace events, ignore. */
/* Userspace events, ignore. */
if (user_mode(regs))
return NOTIFY_DONE;

2
arch/mips/kernel/kspd.c
View File

@ -251,7 +251,7 @@ void sp_work_handle_request(void)
memset(&tz, 0, sizeof(tz));
if ((ret.retval = sp_syscall(__NR_gettimeofday, (int)&tv,
(int)&tz, 0, 0)) == 0)
ret.retval = tv.tv_sec;
ret.retval = tv.tv_sec;
break;
case MTSP_SYSCALL_EXIT:

7
arch/mips/kernel/linux32.c
View File

@ -341,3 +341,10 @@ asmlinkage long sys32_lookup_dcookie(u32 a0, u32 a1, char __user *buf,
{
return sys_lookup_dcookie(merge_64(a0, a1), buf, len);
}
SYSCALL_DEFINE6(32_fanotify_mark, int, fanotify_fd, unsigned int, flags,
u64, a3, u64, a4, int, dfd, const char __user *, pathname)
{
return sys_fanotify_mark(fanotify_fd, flags, merge_64(a3, a4),
dfd, pathname);
}

5
arch/mips/kernel/scall32-o32.S
View File

@ -583,7 +583,10 @@ einval: li v0, -ENOSYS
sys sys_rt_tgsigqueueinfo 4
sys sys_perf_event_open 5
sys sys_accept4 4
sys sys_recvmmsg 5
sys sys_recvmmsg 5 /* 4335 */
sys sys_fanotify_init 2
sys sys_fanotify_mark 6
sys sys_prlimit64 4
.endm
/* We pre-compute the number of _instruction_ bytes needed to

7
arch/mips/kernel/scall64-64.S
View File

@ -416,9 +416,12 @@ sys_call_table:
PTR sys_pipe2
PTR sys_inotify_init1
PTR sys_preadv
PTR sys_pwritev /* 5390 */
PTR sys_pwritev /* 5290 */
PTR sys_rt_tgsigqueueinfo
PTR sys_perf_event_open
PTR sys_accept4
PTR sys_recvmmsg
PTR sys_recvmmsg
PTR sys_fanotify_init /* 5295 */
PTR sys_fanotify_mark
PTR sys_prlimit64
.size sys_call_table,.-sys_call_table

5
arch/mips/kernel/scall64-n32.S
View File

@ -419,5 +419,8 @@ EXPORT(sysn32_call_table)
PTR sys_perf_event_open
PTR sys_accept4
PTR compat_sys_recvmmsg
PTR sys_getdents
PTR sys_getdents64
PTR sys_fanotify_init /* 6300 */
PTR sys_fanotify_mark
PTR sys_prlimit64
.size sysn32_call_table,.-sysn32_call_table

5
arch/mips/kernel/scall64-o32.S
View File

@ -538,5 +538,8 @@ sys_call_table:
PTR compat_sys_rt_tgsigqueueinfo
PTR sys_perf_event_open
PTR sys_accept4
PTR compat_sys_recvmmsg
PTR compat_sys_recvmmsg /* 4335 */
PTR sys_fanotify_init
PTR sys_32_fanotify_mark
PTR sys_prlimit64
.size sys_call_table,.-sys_call_table

28
arch/mips/mm/dma-default.c
View File

@ -44,27 +44,39 @@ static inline int cpu_is_noncoherent_r10000(struct device *dev)
static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
{
gfp_t dma_flag;
/* ignore region specifiers */
gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
#ifdef CONFIG_ZONE_DMA
#ifdef CONFIG_ISA
if (dev == NULL)
gfp |= __GFP_DMA;
else if (dev->coherent_dma_mask < DMA_BIT_MASK(24))
gfp |= __GFP_DMA;
dma_flag = __GFP_DMA;
else
#endif
#ifdef CONFIG_ZONE_DMA32
#if defined(CONFIG_ZONE_DMA32) && defined(CONFIG_ZONE_DMA)
if (dev->coherent_dma_mask < DMA_BIT_MASK(32))
gfp |= __GFP_DMA32;
dma_flag = __GFP_DMA;
else if (dev->coherent_dma_mask < DMA_BIT_MASK(64))
dma_flag = __GFP_DMA32;
else
#endif
;
#if defined(CONFIG_ZONE_DMA32) && !defined(CONFIG_ZONE_DMA)
if (dev->coherent_dma_mask < DMA_BIT_MASK(64))
dma_flag = __GFP_DMA32;
else
#endif
#if defined(CONFIG_ZONE_DMA) && !defined(CONFIG_ZONE_DMA32)
if (dev->coherent_dma_mask < DMA_BIT_MASK(64))
dma_flag = __GFP_DMA;
else
#endif
dma_flag = 0;
/* Don't invoke OOM killer */
gfp |= __GFP_NORETRY;
return gfp;
return gfp | dma_flag;
}
void *dma_alloc_noncoherent(struct device *dev, size_t size,

2
arch/mips/mm/sc-rm7k.c
View File

@ -30,7 +30,7 @@
#define tc_lsize 32
extern unsigned long icache_way_size, dcache_way_size;
unsigned long tcache_size;
static unsigned long tcache_size;
#include <asm/r4kcache.h>

3
arch/mips/mti-malta/malta-int.c
View File

@ -385,6 +385,8 @@ static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap);
*/
#define GIC_CPU_NMI GIC_MAP_TO_NMI_MSK
#define X GIC_UNUSED
static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
{ X, X, X, X, 0 },
{ X, X, X, X, 0 },
@ -404,6 +406,7 @@ static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
{ X, X, X, X, 0 },
/* The remainder of this table is initialised by fill_ipi_map */
};
#undef X
/*
* GCMP needs to be detected before any SMP initialisation

2
arch/mips/pci/pci-rc32434.c
View File

@ -118,7 +118,7 @@ static int __init rc32434_pcibridge_init(void)
if (!((pcicvalue == PCIM_H_EA) ||
(pcicvalue == PCIM_H_IA_FIX) ||
(pcicvalue == PCIM_H_IA_RR))) {
pr_err(KERN_ERR "PCI init error!!!\n");
pr_err("PCI init error!!!\n");
/* Not in Host Mode, return ERROR */
return -1;
}

20
arch/mips/pnx8550/common/reset.c
View File

@ -22,29 +22,19 @@
*/
#include <linux/kernel.h>
#include <asm/processor.h>
#include <asm/reboot.h>
#include <glb.h>
void pnx8550_machine_restart(char *command)
{
char head[] = "************* Machine restart *************";
char foot[] = "*******************************************";
printk("\n\n");
printk("%s\n", head);
if (command != NULL)
printk("* %s\n", command);
printk("%s\n", foot);
PNX8550_RST_CTL = PNX8550_RST_DO_SW_RST;
}
void pnx8550_machine_halt(void)
{
printk("*** Machine halt. (Not implemented) ***\n");
}
void pnx8550_machine_power_off(void)
{
printk("*** Machine power off. (Not implemented) ***\n");
while (1) {
if (cpu_wait)
cpu_wait();
}
}

3
arch/mips/pnx8550/common/setup.c
View File

@ -44,7 +44,6 @@
extern void __init board_setup(void);
extern void pnx8550_machine_restart(char *);
extern void pnx8550_machine_halt(void);
extern void pnx8550_machine_power_off(void);
extern struct resource ioport_resource;
extern struct resource iomem_resource;
extern char *prom_getcmdline(void);
@ -100,7 +99,7 @@ void __init plat_mem_setup(void)
_machine_restart = pnx8550_machine_restart;
_machine_halt = pnx8550_machine_halt;
pm_power_off = pnx8550_machine_power_off;
pm_power_off = pnx8550_machine_halt;
/* Clear the Global 2 Register, PCI Inta Output Enable Registers
Bit 1:Enable DAC Powerdown

2
arch/mn10300/Kconfig.debug
View File

@ -101,7 +101,7 @@ config GDBSTUB_DEBUG_BREAKPOINT
choice
prompt "GDB stub port"
default GDBSTUB_TTYSM0
default GDBSTUB_ON_TTYSM0
depends on GDBSTUB
help
Select the serial port used for GDB-stub.

3
arch/mn10300/kernel/module.c
View File

@ -206,7 +206,7 @@ int module_finalize(const Elf_Ehdr *hdr,
const Elf_Shdr *sechdrs,
struct module *me)
{
return module_bug_finalize(hdr, sechdrs, me);
return 0;
}
/*
@ -214,5 +214,4 @@ int module_finalize(const Elf_Ehdr *hdr,
*/
void module_arch_cleanup(struct module *mod)
{
module_bug_cleanup(mod);
}

35
arch/mn10300/kernel/signal.c
View File

@ -65,10 +65,10 @@ asmlinkage long sys_sigaction(int sig,
old_sigset_t mask;
if (verify_area(VERIFY_READ, act, sizeof(*act)) ||
__get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
__get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
__get_user(new_ka.sa.sa_restorer, &act->sa_restorer) ||
__get_user(new_ka.sa.sa_flags, &act->sa_flags) ||
__get_user(mask, &act->sa_mask))
return -EFAULT;
__get_user(new_ka.sa.sa_flags, &act->sa_flags);
__get_user(mask, &act->sa_mask);
siginitset(&new_ka.sa.sa_mask, mask);
}
@ -77,10 +77,10 @@ asmlinkage long sys_sigaction(int sig,
if (!ret && oact) {
if (verify_area(VERIFY_WRITE, oact, sizeof(*oact)) ||
__put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
__put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
__put_user(old_ka.sa.sa_restorer, &oact->sa_restorer) ||
__put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
return -EFAULT;
__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
}
return ret;
@ -102,6 +102,9 @@ static int restore_sigcontext(struct pt_regs *regs,
{
unsigned int err = 0;
/* Always make any pending restarted system calls return -EINTR */
current_thread_info()->restart_block.fn = do_no_restart_syscall;
if (is_using_fpu(current))
fpu_kill_state(current);
@ -330,8 +333,6 @@ static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
regs->d0 = sig;
regs->d1 = (unsigned long) &frame->sc;
set_fs(USER_DS);
/* the tracer may want to single-step inside the handler */
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
@ -345,7 +346,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
return 0;
give_sigsegv:
force_sig(SIGSEGV, current);
force_sigsegv(sig, current);
return -EFAULT;
}
@ -413,8 +414,6 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
regs->d0 = sig;
regs->d1 = (long) &frame->info;
set_fs(USER_DS);
/* the tracer may want to single-step inside the handler */
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
@ -428,10 +427,16 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
return 0;
give_sigsegv:
force_sig(SIGSEGV, current);
force_sigsegv(sig, current);
return -EFAULT;
}
static inline void stepback(struct pt_regs *regs)
{
regs->pc -= 2;
regs->orig_d0 = -1;
}
/*
* handle the actual delivery of a signal to userspace
*/
@ -459,7 +464,7 @@ static int handle_signal(int sig,
/* fallthrough */
case -ERESTARTNOINTR:
regs->d0 = regs->orig_d0;
regs->pc -= 2;
stepback(regs);
}
}
@ -527,12 +532,12 @@ static void do_signal(struct pt_regs *regs)
case -ERESTARTSYS:
case -ERESTARTNOINTR:
regs->d0 = regs->orig_d0;
regs->pc -= 2;
stepback(regs);
break;
case -ERESTART_RESTARTBLOCK:
regs->d0 = __NR_restart_syscall;
regs->pc -= 2;
stepback(regs);
break;
}
}

14
arch/mn10300/mm/Makefile
View File

@ -2,13 +2,11 @@
# Makefile for the MN10300-specific memory management code
#
cacheflush-y := cache.o cache-mn10300.o
cacheflush-$(CONFIG_MN10300_CACHE_WBACK) += cache-flush-mn10300.o
cacheflush-$(CONFIG_MN10300_CACHE_DISABLED) := cache-disabled.o
obj-y := \
init.o fault.o pgtable.o extable.o tlb-mn10300.o mmu-context.o \
misalignment.o dma-alloc.o
ifneq ($(CONFIG_MN10300_CACHE_DISABLED),y)
obj-y += cache.o cache-mn10300.o
ifeq ($(CONFIG_MN10300_CACHE_WBACK),y)
obj-y += cache-flush-mn10300.o
endif
endif
misalignment.o dma-alloc.o $(cacheflush-y)

21
arch/mn10300/mm/cache-disabled.c Normal file
View File

@ -0,0 +1,21 @@
/* Handle the cache being disabled
*
* Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/mm.h>
/*
* allow userspace to flush the instruction cache
*/
asmlinkage long sys_cacheflush(unsigned long start, unsigned long end)
{
if (end < start)
return -EINVAL;
return 0;
}

20
arch/mn10300/mm/cache.c
View File

@ -54,13 +54,30 @@ EXPORT_SYMBOL(flush_icache_page);
void flush_icache_range(unsigned long start, unsigned long end)
{
#ifdef CONFIG_MN10300_CACHE_WBACK
unsigned long addr, size, off;
unsigned long addr, size, base, off;
struct page *page;
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
pte_t *ppte, pte;
if (end > 0x80000000UL) {
/* addresses above 0xa0000000 do not go through the cache */
if (end > 0xa0000000UL) {
end = 0xa0000000UL;
if (start >= end)
return;
}
/* kernel addresses between 0x80000000 and 0x9fffffff do not
* require page tables, so we just map such addresses directly */
base = (start >= 0x80000000UL) ? start : 0x80000000UL;
mn10300_dcache_flush_range(base, end);
if (base == start)
goto invalidate;
end = base;
}
for (; start < end; start += size) {
/* work out how much of the page to flush */
off = start & (PAGE_SIZE - 1);
@ -104,6 +121,7 @@ void flush_icache_range(unsigned long start, unsigned long end)
}
#endif
invalidate:
mn10300_icache_inv();
}
EXPORT_SYMBOL(flush_icache_range);

3
arch/parisc/kernel/module.c
View File

@ -941,11 +941,10 @@ int module_finalize(const Elf_Ehdr *hdr,
nsyms = newptr - (Elf_Sym *)symhdr->sh_addr;
DEBUGP("NEW num_symtab %lu\n", nsyms);
symhdr->sh_size = nsyms * sizeof(Elf_Sym);
return module_bug_finalize(hdr, sechdrs, me);
return 0;
}
void module_arch_cleanup(struct module *mod)
{
deregister_unwind_table(mod);
module_bug_cleanup(mod);
}

6
arch/powerpc/kernel/module.c
View File

@ -63,11 +63,6 @@ int module_finalize(const Elf_Ehdr *hdr,
const Elf_Shdr *sechdrs, struct module *me)
{
const Elf_Shdr *sect;
int err;
err = module_bug_finalize(hdr, sechdrs, me);
if (err)
return err;
/* Apply feature fixups */
sect = find_section(hdr, sechdrs, "__ftr_fixup");
@ -101,5 +96,4 @@ int module_finalize(const Elf_Ehdr *hdr,
void module_arch_cleanup(struct module *mod)
{
module_bug_cleanup(mod);
}

2
arch/powerpc/platforms/512x/clock.c
View File

@ -57,7 +57,7 @@ static struct clk *mpc5121_clk_get(struct device *dev, const char *id)
int id_match = 0;
if (dev == NULL || id == NULL)
return NULL;
return clk;
mutex_lock(&clocks_mutex);
list_for_each_entry(p, &clocks, node) {

9
arch/powerpc/platforms/52xx/efika.c
View File

@ -99,7 +99,7 @@ static void __init efika_pcisetup(void)
if (bus_range == NULL || len < 2 * sizeof(int)) {
printk(KERN_WARNING EFIKA_PLATFORM_NAME
": Can't get bus-range for %s\n", pcictrl->full_name);
return;
goto out_put;
}
if (bus_range[1] == bus_range[0])
@ -111,12 +111,12 @@ static void __init efika_pcisetup(void)
printk(" controlled by %s\n", pcictrl->full_name);
printk("\n");
hose = pcibios_alloc_controller(of_node_get(pcictrl));
hose = pcibios_alloc_controller(pcictrl);
if (!hose) {
printk(KERN_WARNING EFIKA_PLATFORM_NAME
": Can't allocate PCI controller structure for %s\n",
pcictrl->full_name);
return;
goto out_put;
}
hose->first_busno = bus_range[0];
@ -124,6 +124,9 @@ static void __init efika_pcisetup(void)
hose->ops = &rtas_pci_ops;
pci_process_bridge_OF_ranges(hose, pcictrl, 0);
return;
out_put:
of_node_put(pcictrl);
}
#else

8
arch/powerpc/platforms/52xx/mpc52xx_common.c
View File

@ -325,12 +325,16 @@ int mpc5200_psc_ac97_gpio_reset(int psc_number)
clrbits32(&simple_gpio->simple_dvo, sync | out);
clrbits8(&wkup_gpio->wkup_dvo, reset);
/* wait at lease 1 us */
udelay(2);
/* wait for 1 us */
udelay(1);
/* Deassert reset */
setbits8(&wkup_gpio->wkup_dvo, reset);
/* wait at least 200ns */
/* 7 ~= (200ns * timebase) / ns2sec */
__delay(7);
/* Restore pin-muxing */
out_be32(&simple_gpio->port_config, mux);

3
arch/s390/kernel/module.c
View File

@ -407,10 +407,9 @@ int module_finalize(const Elf_Ehdr *hdr,
{
vfree(me->arch.syminfo);
me->arch.syminfo = NULL;
return module_bug_finalize(hdr, sechdrs, me);
return 0;
}
void module_arch_cleanup(struct module *mod)
{
module_bug_cleanup(mod);
}

2
arch/sh/kernel/module.c
View File

@ -149,13 +149,11 @@ int module_finalize(const Elf_Ehdr *hdr,
int ret = 0;
ret |= module_dwarf_finalize(hdr, sechdrs, me);
ret |= module_bug_finalize(hdr, sechdrs, me);
return ret;
}
void module_arch_cleanup(struct module *mod)
{
module_bug_cleanup(mod);
module_dwarf_cleanup(mod);
}

Some files were not shown because too many files have changed in this diff Show More