mirror of
https://github.com/torvalds/linux.git
synced 2024-11-24 21:21:41 +00:00
hwmon: (pmbus) Add support for MPS Multi-phase mp2856/mp2857 controller
Add support for mp2856/mp2857 device from Monolithic Power Systems, Inc. (MPS) vendor. This is a dual-loop, digital, multi-phase, modulation controller. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://lore.kernel.org/r/20231211160519.21254-3-potin.lai.pt@gmail.com [groeck: Fix checkpatch issues, use i2c_get_match_data()] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Peter Yin
Guenter Roeck
parent
956cf0986a
commit
f9e5f289b6
@ -158,6 +158,7 @@ Hardware Monitoring Kernel Drivers
|
||||
mcp3021
|
||||
menf21bmc
|
||||
mlxreg-fan
|
||||
mp2856
|
||||
mp2888
|
||||
mp2975
|
||||
mp5023
|
||||
|
||||
98
Documentation/hwmon/mp2856.rst
Normal file
98
Documentation/hwmon/mp2856.rst
Normal file
@ -0,0 +1,98 @@
|
||||
.. SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
Kernel driver mp2856
|
||||
====================
|
||||
|
||||
Supported chips:
|
||||
|
||||
* MPS MP2856
|
||||
|
||||
Prefix: 'mp2856'
|
||||
|
||||
* MPS MP2857
|
||||
|
||||
Prefix: 'mp2857'
|
||||
|
||||
Author:
|
||||
|
||||
Peter Yin <peter.yin@quantatw.com>
|
||||
|
||||
Description
|
||||
-----------
|
||||
|
||||
This driver implements support for Monolithic Power Systems, Inc. (MPS)
|
||||
vendor dual-loop, digital, multi-phase controller MP2856/MP2857
|
||||
|
||||
This device:
|
||||
|
||||
- Supports up to two power rail.
|
||||
- Supports two pages 0 and 1 for and also pages 2 for configuration.
|
||||
- Can configured VOUT readout in direct or VID format and allows
|
||||
setting of different formats on rails 1 and 2. For VID the following
|
||||
protocols are available: AMD SVI3 mode with 5-mV/LSB.
|
||||
|
||||
Device supports:
|
||||
|
||||
- SVID interface.
|
||||
- AVSBus interface.
|
||||
|
||||
Device compliant with:
|
||||
|
||||
- PMBus rev 1.3 interface.
|
||||
|
||||
Device supports direct format for reading output current, output voltage,
|
||||
input and output power and temperature.
|
||||
Device supports linear format for reading input voltage and input power.
|
||||
Device supports VID and direct formats for reading output voltage.
|
||||
The below VID modes are supported: AMD SVI3.
|
||||
|
||||
The driver provides the following sysfs attributes for current measurements:
|
||||
|
||||
- indexes 1 for "iin";
|
||||
- indexes 2, 3 for "iout";
|
||||
|
||||
**curr[1-3]_alarm**
|
||||
|
||||
**curr[1-3]_input**
|
||||
|
||||
**curr[1-3]_label**
|
||||
|
||||
The driver provides the following sysfs attributes for voltage measurements.
|
||||
|
||||
- indexes 1 for "vin";
|
||||
- indexes 2, 3 for "vout";
|
||||
|
||||
**in[1-3]_crit**
|
||||
|
||||
**in[1-3]_crit_alarm**
|
||||
|
||||
**in[1-3]_input**
|
||||
|
||||
**in[1-3]_label**
|
||||
|
||||
**in[1-3]_lcrit**
|
||||
|
||||
**in[1-3]_lcrit_alarm**
|
||||
|
||||
The driver provides the following sysfs attributes for power measurements.
|
||||
|
||||
- indexes 1 for "pin";
|
||||
- indexes 2, 3 for "pout";
|
||||
|
||||
**power[1-3]_alarm**
|
||||
|
||||
**power[1-3]_input**
|
||||
|
||||
**power[1-3]_label**
|
||||
|
||||
The driver provides the following sysfs attributes for temperature measurements.
|
||||
|
||||
**temp[1-2]_crit**
|
||||
|
||||
**temp[1-2]_crit_alarm**
|
||||
|
||||
**temp[1-2]_input**
|
||||
|
||||
**temp[1-2]_max**
|
||||
|
||||
**temp[1-2]_max_alarm**
|
||||
@ -309,6 +309,15 @@ config SENSORS_MAX8688
|
||||
This driver can also be built as a module. If so, the module will
|
||||
be called max8688.
|
||||
|
||||
config SENSORS_MP2856
|
||||
tristate "MPS MP2856"
|
||||
help
|
||||
If you say yes here you get hardware monitoring support for MPS
|
||||
MP2856 MP2857 Dual Loop Digital Multi-Phase Controller.
|
||||
|
||||
This driver can also be built as a module. If so, the module will
|
||||
be called mp2856.
|
||||
|
||||
config SENSORS_MP2888
|
||||
tristate "MPS MP2888"
|
||||
help
|
||||
|
||||
@ -33,6 +33,7 @@ obj-$(CONFIG_SENSORS_MAX20751) += max20751.o
|
||||
obj-$(CONFIG_SENSORS_MAX31785) += max31785.o
|
||||
obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
|
||||
obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
|
||||
obj-$(CONFIG_SENSORS_MP2856) += mp2856.o
|
||||
obj-$(CONFIG_SENSORS_MP2888) += mp2888.o
|
||||
obj-$(CONFIG_SENSORS_MP2975) += mp2975.o
|
||||
obj-$(CONFIG_SENSORS_MP5023) += mp5023.o
|
||||
|
||||
466
drivers/hwmon/pmbus/mp2856.c
Normal file
466
drivers/hwmon/pmbus/mp2856.c
Normal file
@ -0,0 +1,466 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
/*
|
||||
* Hardware monitoring driver for MPS2856/2857
|
||||
* Monolithic Power Systems VR Controllers
|
||||
*
|
||||
* Copyright (C) 2023 Quanta Computer lnc.
|
||||
*/
|
||||
|
||||
#include <linux/err.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/pmbus.h>
|
||||
#include "pmbus.h"
|
||||
|
||||
/* Vendor specific registers. */
|
||||
#define MP2856_MFR_VR_MULTI_CONFIG_R1 0x0d
|
||||
#define MP2856_MFR_VR_MULTI_CONFIG_R2 0x1d
|
||||
|
||||
#define MP2856_MUL1_BOOT_SR_R2 0x10
|
||||
#define MP2856_VR_ACTIVE BIT(15)
|
||||
|
||||
#define MP2856_MFR_VR_CONFIG2 0x5e
|
||||
#define MP2856_VOUT_MODE BIT(11)
|
||||
|
||||
#define MP2856_MFR_VR_CONFIG1 0x68
|
||||
#define MP2856_DRMOS_KCS GENMASK(13, 12)
|
||||
|
||||
#define MP2856_MFR_READ_CS1_2_R1 0x82
|
||||
#define MP2856_MFR_READ_CS3_4_R1 0x83
|
||||
#define MP2856_MFR_READ_CS5_6_R1 0x84
|
||||
#define MP2856_MFR_READ_CS7_8_R1 0x85
|
||||
#define MP2856_MFR_READ_CS9_10_R1 0x86
|
||||
#define MP2856_MFR_READ_CS11_12_R1 0x87
|
||||
|
||||
#define MP2856_MFR_READ_CS1_2_R2 0x85
|
||||
#define MP2856_MFR_READ_CS3_4_R2 0x86
|
||||
#define MP2856_MFR_READ_CS5_6_R2 0x87
|
||||
|
||||
#define MP2856_MAX_PHASE_RAIL1 8
|
||||
#define MP2856_MAX_PHASE_RAIL2 4
|
||||
|
||||
#define MP2857_MAX_PHASE_RAIL1 12
|
||||
#define MP2857_MAX_PHASE_RAIL2 4
|
||||
|
||||
#define MP2856_PAGE_NUM 2
|
||||
|
||||
enum chips { mp2856 = 1, mp2857 };
|
||||
|
||||
static const int mp2856_max_phases[][MP2856_PAGE_NUM] = {
|
||||
[mp2856] = { MP2856_MAX_PHASE_RAIL1, MP2856_MAX_PHASE_RAIL2 },
|
||||
[mp2857] = { MP2857_MAX_PHASE_RAIL1, MP2857_MAX_PHASE_RAIL2 },
|
||||
};
|
||||
|
||||
static const struct i2c_device_id mp2856_id[] = {
|
||||
{"mp2856", mp2856},
|
||||
{"mp2857", mp2857},
|
||||
{}
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(i2c, mp2856_id);
|
||||
|
||||
struct mp2856_data {
|
||||
struct pmbus_driver_info info;
|
||||
int vout_format[MP2856_PAGE_NUM];
|
||||
int curr_sense_gain[MP2856_PAGE_NUM];
|
||||
int max_phases[MP2856_PAGE_NUM];
|
||||
enum chips chip_id;
|
||||
};
|
||||
|
||||
#define to_mp2856_data(x) container_of(x, struct mp2856_data, info)
|
||||
|
||||
#define MAX_LIN_MANTISSA (1023 * 1000)
|
||||
#define MIN_LIN_MANTISSA (511 * 1000)
|
||||
|
||||
static u16 val2linear11(s64 val)
|
||||
{
|
||||
s16 exponent = 0, mantissa;
|
||||
bool negative = false;
|
||||
|
||||
if (val == 0)
|
||||
return 0;
|
||||
|
||||
if (val < 0) {
|
||||
negative = true;
|
||||
val = -val;
|
||||
}
|
||||
|
||||
/* Reduce large mantissa until it fits into 10 bit */
|
||||
while (val >= MAX_LIN_MANTISSA && exponent < 15) {
|
||||
exponent++;
|
||||
val >>= 1;
|
||||
}
|
||||
/* Increase small mantissa to improve precision */
|
||||
while (val < MIN_LIN_MANTISSA && exponent > -15) {
|
||||
exponent--;
|
||||
val <<= 1;
|
||||
}
|
||||
|
||||
/* Convert mantissa from milli-units to units */
|
||||
mantissa = clamp_val(DIV_ROUND_CLOSEST_ULL(val, 1000), 0, 0x3ff);
|
||||
|
||||
/* restore sign */
|
||||
if (negative)
|
||||
mantissa = -mantissa;
|
||||
|
||||
/* Convert to 5 bit exponent, 11 bit mantissa */
|
||||
return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800);
|
||||
}
|
||||
|
||||
static int
|
||||
mp2856_read_word_helper(struct i2c_client *client, int page, int phase, u8 reg,
|
||||
u16 mask)
|
||||
{
|
||||
int ret = pmbus_read_word_data(client, page, phase, reg);
|
||||
|
||||
return (ret > 0) ? ret & mask : ret;
|
||||
}
|
||||
|
||||
static int
|
||||
mp2856_read_vout(struct i2c_client *client, struct mp2856_data *data, int page,
|
||||
int phase, u8 reg)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = mp2856_read_word_helper(client, page, phase, reg,
|
||||
GENMASK(9, 0));
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* convert vout result to direct format */
|
||||
ret = (data->vout_format[page] == vid) ?
|
||||
((ret + 49) * 5) : ((ret * 1000) >> 8);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int
|
||||
mp2856_read_phase(struct i2c_client *client, struct mp2856_data *data,
|
||||
int page, int phase, u8 reg)
|
||||
{
|
||||
int ret;
|
||||
int val;
|
||||
|
||||
ret = pmbus_read_word_data(client, page, phase, reg);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
if (!((phase + 1) % MP2856_PAGE_NUM))
|
||||
ret >>= 8;
|
||||
ret &= 0xff;
|
||||
|
||||
/*
|
||||
* Output value is calculated as: (READ_CSx * 12.5mV - 1.23V) / (Kcs * Rcs)
|
||||
*/
|
||||
val = (ret * 125) - 12300;
|
||||
|
||||
return val2linear11(val);
|
||||
}
|
||||
|
||||
static int
|
||||
mp2856_read_phases(struct i2c_client *client, struct mp2856_data *data,
|
||||
int page, int phase)
|
||||
{
|
||||
int ret;
|
||||
|
||||
if (page == 0) {
|
||||
switch (phase) {
|
||||
case 0 ... 1:
|
||||
ret = mp2856_read_phase(client, data, page, phase,
|
||||
MP2856_MFR_READ_CS1_2_R1);
|
||||
break;
|
||||
case 2 ... 3:
|
||||
ret = mp2856_read_phase(client, data, page, phase,
|
||||
MP2856_MFR_READ_CS3_4_R1);
|
||||
break;
|
||||
case 4 ... 5:
|
||||
ret = mp2856_read_phase(client, data, page, phase,
|
||||
MP2856_MFR_READ_CS5_6_R1);
|
||||
break;
|
||||
case 6 ... 7:
|
||||
ret = mp2856_read_phase(client, data, page, phase,
|
||||
MP2856_MFR_READ_CS7_8_R1);
|
||||
break;
|
||||
default:
|
||||
return -ENODATA;
|
||||
}
|
||||
} else {
|
||||
switch (phase) {
|
||||
case 0 ... 1:
|
||||
ret = mp2856_read_phase(client, data, page, phase,
|
||||
MP2856_MFR_READ_CS1_2_R2);
|
||||
break;
|
||||
case 2 ... 3:
|
||||
ret = mp2856_read_phase(client, data, page, phase,
|
||||
MP2856_MFR_READ_CS1_2_R2);
|
||||
break;
|
||||
default:
|
||||
return -ENODATA;
|
||||
}
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int
|
||||
mp2856_read_word_data(struct i2c_client *client, int page,
|
||||
int phase, int reg)
|
||||
{
|
||||
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
|
||||
struct mp2856_data *data = to_mp2856_data(info);
|
||||
int ret;
|
||||
|
||||
switch (reg) {
|
||||
case PMBUS_READ_VOUT:
|
||||
ret = mp2856_read_vout(client, data, page, phase, reg);
|
||||
break;
|
||||
case PMBUS_READ_IOUT:
|
||||
if (phase != 0xff)
|
||||
ret = mp2856_read_phases(client, data, page, phase);
|
||||
else
|
||||
ret = pmbus_read_word_data(client, page, phase, reg);
|
||||
break;
|
||||
default:
|
||||
return -ENODATA;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int
|
||||
mp2856_read_byte_data(struct i2c_client *client, int page, int reg)
|
||||
{
|
||||
switch (reg) {
|
||||
case PMBUS_VOUT_MODE:
|
||||
/* Enforce VOUT direct format. */
|
||||
return PB_VOUT_MODE_DIRECT;
|
||||
default:
|
||||
return -ENODATA;
|
||||
}
|
||||
}
|
||||
|
||||
static int
|
||||
mp2856_identify_multiphase(struct i2c_client *client, u8 reg, u8 max_phase,
|
||||
u16 mask)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 2);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = i2c_smbus_read_word_data(client, reg);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret &= mask;
|
||||
return (ret >= max_phase) ? max_phase : ret;
|
||||
}
|
||||
|
||||
static int
|
||||
mp2856_identify_multiphase_rail1(struct i2c_client *client,
|
||||
struct mp2856_data *data)
|
||||
{
|
||||
int ret, i;
|
||||
|
||||
ret = mp2856_identify_multiphase(client, MP2856_MFR_VR_MULTI_CONFIG_R1,
|
||||
MP2856_MAX_PHASE_RAIL1, GENMASK(3, 0));
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
data->info.phases[0] = (ret > data->max_phases[0]) ?
|
||||
data->max_phases[0] : ret;
|
||||
|
||||
for (i = 0 ; i < data->info.phases[0]; i++)
|
||||
data->info.pfunc[i] |= PMBUS_HAVE_IOUT;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int
|
||||
mp2856_identify_multiphase_rail2(struct i2c_client *client,
|
||||
struct mp2856_data *data)
|
||||
{
|
||||
int ret, i;
|
||||
|
||||
ret = mp2856_identify_multiphase(client, MP2856_MFR_VR_MULTI_CONFIG_R2,
|
||||
MP2856_MAX_PHASE_RAIL2, GENMASK(2, 0));
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
data->info.phases[1] = (ret > data->max_phases[1]) ?
|
||||
data->max_phases[1] : ret;
|
||||
|
||||
for (i = 0 ; i < data->info.phases[0]; i++)
|
||||
data->info.pfunc[i] |= PMBUS_HAVE_IOUT;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int
|
||||
mp2856_current_sense_gain_get(struct i2c_client *client,
|
||||
struct mp2856_data *data)
|
||||
{
|
||||
int i, ret;
|
||||
|
||||
/*
|
||||
* Obtain DrMOS current sense gain of power stage from the register
|
||||
* MP2856_MFR_VR_CONFIG1, bits 13-12. The value is selected as below:
|
||||
* 00b - 5µA/A, 01b - 8.5µA/A, 10b - 9.7µA/A, 11b - 10µA/A. Other
|
||||
* values are invalid.
|
||||
*/
|
||||
for (i = 0 ; i < data->info.pages; i++) {
|
||||
ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
ret = i2c_smbus_read_word_data(client,
|
||||
MP2856_MFR_VR_CONFIG1);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
switch ((ret & MP2856_DRMOS_KCS) >> 12) {
|
||||
case 0:
|
||||
data->curr_sense_gain[i] = 50;
|
||||
break;
|
||||
case 1:
|
||||
data->curr_sense_gain[i] = 85;
|
||||
break;
|
||||
case 2:
|
||||
data->curr_sense_gain[i] = 97;
|
||||
break;
|
||||
default:
|
||||
data->curr_sense_gain[i] = 100;
|
||||
break;
|
||||
}
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int
|
||||
mp2856_identify_vout_format(struct i2c_client *client,
|
||||
struct mp2856_data *data)
|
||||
{
|
||||
int i, ret;
|
||||
|
||||
for (i = 0; i < data->info.pages; i++) {
|
||||
ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = i2c_smbus_read_word_data(client, MP2856_MFR_VR_CONFIG2);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
data->vout_format[i] = (ret & MP2856_VOUT_MODE) ? linear : vid;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static bool
|
||||
mp2856_is_rail2_active(struct i2c_client *client)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 2);
|
||||
if (ret < 0)
|
||||
return true;
|
||||
|
||||
ret = i2c_smbus_read_word_data(client, MP2856_MUL1_BOOT_SR_R2);
|
||||
if (ret < 0)
|
||||
return true;
|
||||
|
||||
return (ret & MP2856_VR_ACTIVE) ? true : false;
|
||||
}
|
||||
|
||||
static struct pmbus_driver_info mp2856_info = {
|
||||
.pages = MP2856_PAGE_NUM,
|
||||
.format[PSC_VOLTAGE_IN] = linear,
|
||||
.format[PSC_VOLTAGE_OUT] = direct,
|
||||
.format[PSC_TEMPERATURE] = linear,
|
||||
.format[PSC_CURRENT_IN] = linear,
|
||||
.format[PSC_CURRENT_OUT] = linear,
|
||||
.format[PSC_POWER] = linear,
|
||||
.m[PSC_VOLTAGE_OUT] = 1,
|
||||
.R[PSC_VOLTAGE_OUT] = 3,
|
||||
.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
|
||||
PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
|
||||
PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_POUT |
|
||||
PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT,
|
||||
.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_IOUT |
|
||||
PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP,
|
||||
.read_byte_data = mp2856_read_byte_data,
|
||||
.read_word_data = mp2856_read_word_data,
|
||||
};
|
||||
|
||||
static int mp2856_probe(struct i2c_client *client)
|
||||
{
|
||||
struct pmbus_driver_info *info;
|
||||
struct mp2856_data *data;
|
||||
int ret;
|
||||
|
||||
data = devm_kzalloc(&client->dev, sizeof(struct mp2856_data),
|
||||
GFP_KERNEL);
|
||||
if (!data)
|
||||
return -ENOMEM;
|
||||
|
||||
data->chip_id = (enum chips)(uintptr_t)i2c_get_match_data(client);
|
||||
|
||||
memcpy(data->max_phases, mp2856_max_phases[data->chip_id],
|
||||
sizeof(data->max_phases));
|
||||
|
||||
memcpy(&data->info, &mp2856_info, sizeof(*info));
|
||||
info = &data->info;
|
||||
|
||||
/* Identify multiphase configuration. */
|
||||
ret = mp2856_identify_multiphase_rail1(client, data);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
if (mp2856_is_rail2_active(client)) {
|
||||
ret = mp2856_identify_multiphase_rail2(client, data);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
} else {
|
||||
/* rail2 is not active */
|
||||
info->pages = 1;
|
||||
}
|
||||
|
||||
/* Obtain current sense gain of power stage. */
|
||||
ret = mp2856_current_sense_gain_get(client, data);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* Identify vout format. */
|
||||
ret = mp2856_identify_vout_format(client, data);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* set the device to page 0 */
|
||||
i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);
|
||||
|
||||
return pmbus_do_probe(client, info);
|
||||
}
|
||||
|
||||
static const struct of_device_id __maybe_unused mp2856_of_match[] = {
|
||||
{.compatible = "mps,mp2856", .data = (void *)mp2856},
|
||||
{.compatible = "mps,mp2857", .data = (void *)mp2857},
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, mp2856_of_match);
|
||||
|
||||
static struct i2c_driver mp2856_driver = {
|
||||
.driver = {
|
||||
.name = "mp2856",
|
||||
.of_match_table = mp2856_of_match,
|
||||
},
|
||||
.probe = mp2856_probe,
|
||||
.id_table = mp2856_id,
|
||||
};
|
||||
|
||||
module_i2c_driver(mp2856_driver);
|
||||
|
||||
MODULE_AUTHOR("Peter Yin <peter.yin@quantatw.com>");
|
||||
MODULE_DESCRIPTION("PMBus driver for MPS MP2856/MP2857 device");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_IMPORT_NS(PMBUS);
|
||||
Loading…
Reference in New Issue
Block a user