drm/i915: add dynamic performance control support for Ironlake

Ironlake (and 965GM, which this patch doesn't support) supports a
hardware performance and power management feature that allows it to
adjust to changes in GPU load over time with software help.  The goal
if this is to maximize performance/power for a given workload.

This patch enables that feature, which is also a requirement for
supporting Intelligent Power Sharing, a feature which allows for
dynamic budgeting of power between the CPU and GPU in Arrandale
platforms.

Tested-by: ykzhao <yakui.zhao@intel.com>
[anholt: Resolved against the irq handler loop removal]
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
This commit is contained in:
Jesse Barnes 2010-01-29 11:27:07 -08:00 committed by Eric Anholt
parent ee980b8003
commit f97108d1d0
8 changed files with 411 additions and 10 deletions

View File

@ -386,6 +386,97 @@ out:
return 0;
}
static int i915_rstdby_delays(struct seq_file *m, void *unused)
{
struct drm_info_node *node = (struct drm_info_node *) m->private;
struct drm_device *dev = node->minor->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
u16 crstanddelay = I915_READ16(CRSTANDVID);
seq_printf(m, "w/ctx: %d, w/o ctx: %d\n", (crstanddelay >> 8) & 0x3f, (crstanddelay & 0x3f));
return 0;
}
static int i915_cur_delayinfo(struct seq_file *m, void *unused)
{
struct drm_info_node *node = (struct drm_info_node *) m->private;
struct drm_device *dev = node->minor->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
u16 rgvswctl = I915_READ16(MEMSWCTL);
seq_printf(m, "Last command: 0x%01x\n", (rgvswctl >> 13) & 0x3);
seq_printf(m, "Command status: %d\n", (rgvswctl >> 12) & 1);
seq_printf(m, "P%d DELAY 0x%02x\n", (rgvswctl >> 8) & 0xf,
rgvswctl & 0x3f);
return 0;
}
static int i915_delayfreq_table(struct seq_file *m, void *unused)
{
struct drm_info_node *node = (struct drm_info_node *) m->private;
struct drm_device *dev = node->minor->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
u32 delayfreq;
int i;
for (i = 0; i < 16; i++) {
delayfreq = I915_READ(PXVFREQ_BASE + i * 4);
seq_printf(m, "P%02dVIDFREQ: 0x%08x\n", i, delayfreq);
}
return 0;
}
static inline int MAP_TO_MV(int map)
{
return 1250 - (map * 25);
}
static int i915_inttoext_table(struct seq_file *m, void *unused)
{
struct drm_info_node *node = (struct drm_info_node *) m->private;
struct drm_device *dev = node->minor->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
u32 inttoext;
int i;
for (i = 1; i <= 32; i++) {
inttoext = I915_READ(INTTOEXT_BASE_ILK + i * 4);
seq_printf(m, "INTTOEXT%02d: 0x%08x\n", i, inttoext);
}
return 0;
}
static int i915_drpc_info(struct seq_file *m, void *unused)
{
struct drm_info_node *node = (struct drm_info_node *) m->private;
struct drm_device *dev = node->minor->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
u32 rgvmodectl = I915_READ(MEMMODECTL);
seq_printf(m, "HD boost: %s\n", (rgvmodectl & MEMMODE_BOOST_EN) ?
"yes" : "no");
seq_printf(m, "Boost freq: %d\n",
(rgvmodectl & MEMMODE_BOOST_FREQ_MASK) >>
MEMMODE_BOOST_FREQ_SHIFT);
seq_printf(m, "HW control enabled: %s\n",
rgvmodectl & MEMMODE_HWIDLE_EN ? "yes" : "no");
seq_printf(m, "SW control enabled: %s\n",
rgvmodectl & MEMMODE_SWMODE_EN ? "yes" : "no");
seq_printf(m, "Gated voltage change: %s\n",
rgvmodectl & MEMMODE_RCLK_GATE ? "yes" : "no");
seq_printf(m, "Starting frequency: P%d\n",
(rgvmodectl & MEMMODE_FSTART_MASK) >> MEMMODE_FSTART_SHIFT);
seq_printf(m, "Max frequency: P%d\n",
(rgvmodectl & MEMMODE_FMAX_MASK) >> MEMMODE_FMAX_SHIFT);
seq_printf(m, "Min frequency: P%d\n", (rgvmodectl & MEMMODE_FMIN_MASK));
return 0;
}
static int
i915_wedged_open(struct inode *inode,
struct file *filp)
@ -503,6 +594,11 @@ static struct drm_info_list i915_debugfs_list[] = {
{"i915_ringbuffer_info", i915_ringbuffer_info, 0},
{"i915_batchbuffers", i915_batchbuffer_info, 0},
{"i915_error_state", i915_error_state, 0},
{"i915_rstdby_delays", i915_rstdby_delays, 0},
{"i915_cur_delayinfo", i915_cur_delayinfo, 0},
{"i915_delayfreq_table", i915_delayfreq_table, 0},
{"i915_inttoext_table", i915_inttoext_table, 0},
{"i915_drpc_info", i915_drpc_info, 0},
};
#define I915_DEBUGFS_ENTRIES ARRAY_SIZE(i915_debugfs_list)

View File

@ -583,6 +583,11 @@ static int __init i915_init(void)
driver.driver_features &= ~DRIVER_MODESET;
#endif
if (!(driver.driver_features & DRIVER_MODESET)) {
driver.suspend = i915_suspend;
driver.resume = i915_resume;
}
return drm_init(&driver);
}

View File

@ -452,6 +452,7 @@ typedef struct drm_i915_private {
u32 savePIPEB_DATA_N1;
u32 savePIPEB_LINK_M1;
u32 savePIPEB_LINK_N1;
u32 saveRSTDBYCTL;
struct {
struct drm_mm gtt_space;
@ -590,7 +591,12 @@ typedef struct drm_i915_private {
int child_dev_num;
struct child_device_config *child_dev;
struct drm_connector *int_lvds_connector;
bool mchbar_need_disable;
u8 cur_delay;
u8 min_delay;
u8 max_delay;
} drm_i915_private_t;
/** driver private structure attached to each drm_gem_object */

View File

@ -269,6 +269,57 @@ static void i915_hotplug_work_func(struct work_struct *work)
drm_sysfs_hotplug_event(dev);
}
static void i915_handle_rps_change(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
u32 slow_up, slow_down, max_avg, min_avg;
u16 rgvswctl;
u8 new_delay = dev_priv->cur_delay;
I915_WRITE(MEMINTRSTS, I915_READ(MEMINTRSTS) & ~MEMINT_EVAL_CHG);
slow_up = I915_READ(RCPREVBSYTUPAVG);
slow_down = I915_READ(RCPREVBSYTDNAVG);
max_avg = I915_READ(RCBMAXAVG);
min_avg = I915_READ(RCBMINAVG);
/* Handle RCS change request from hw */
if (slow_up > max_avg) {
if (dev_priv->cur_delay != dev_priv->max_delay)
new_delay = dev_priv->cur_delay - 1;
if (new_delay < dev_priv->max_delay)
new_delay = dev_priv->max_delay;
} else if (slow_down < min_avg) {
if (dev_priv->cur_delay != dev_priv->min_delay)
new_delay = dev_priv->cur_delay + 1;
if (new_delay > dev_priv->min_delay)
new_delay = dev_priv->min_delay;
}
DRM_DEBUG("rps change requested: %d -> %d\n",
dev_priv->cur_delay, new_delay);
rgvswctl = I915_READ(MEMSWCTL);
if (rgvswctl & MEMCTL_CMD_STS) {
DRM_ERROR("gpu slow, RCS change rejected\n");
return; /* still slow with another command */
}
/* Program the new state */
rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
(new_delay << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM;
I915_WRITE(MEMSWCTL, rgvswctl);
POSTING_READ(MEMSWCTL);
rgvswctl |= MEMCTL_CMD_STS;
I915_WRITE(MEMSWCTL, rgvswctl);
dev_priv->cur_delay = new_delay;
DRM_DEBUG("rps changed\n");
return;
}
irqreturn_t ironlake_irq_handler(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@ -331,6 +382,11 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev)
queue_work(dev_priv->wq, &dev_priv->hotplug_work);
}
if (de_iir & DE_PCU_EVENT) {
I915_WRITE(MEMINTRSTS, I915_READ(MEMINTRSTS));
i915_handle_rps_change(dev);
}
/* should clear PCH hotplug event before clear CPU irq */
I915_WRITE(SDEIIR, pch_iir);
I915_WRITE(GTIIR, gt_iir);
@ -1064,6 +1120,13 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
I915_WRITE(SDEIER, dev_priv->pch_irq_enable_reg);
(void) I915_READ(SDEIER);
if (IS_IRONLAKE_M(dev)) {
/* Clear & enable PCU event interrupts */
I915_WRITE(DEIIR, DE_PCU_EVENT);
I915_WRITE(DEIER, I915_READ(DEIER) | DE_PCU_EVENT);
ironlake_enable_display_irq(dev_priv, DE_PCU_EVENT);
}
return 0;
}

View File

@ -61,6 +61,7 @@
#define GC_CLOCK_100_200 (1 << 0)
#define GC_CLOCK_100_133 (2 << 0)
#define GC_CLOCK_166_250 (3 << 0)
#define GCFGC2 0xda
#define GCFGC 0xf0 /* 915+ only */
#define GC_LOW_FREQUENCY_ENABLE (1 << 7)
#define GC_DISPLAY_CLOCK_190_200_MHZ (0 << 4)
@ -282,7 +283,7 @@
#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18)
#define I915_DISPLAY_PORT_INTERRUPT (1<<17)
#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15)
#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14)
#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14) /* p-state */
#define I915_HWB_OOM_INTERRUPT (1<<13)
#define I915_SYNC_STATUS_INTERRUPT (1<<12)
#define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11)
@ -787,10 +788,144 @@
#define CLKCFG_MEM_800 (3 << 4)
#define CLKCFG_MEM_MASK (7 << 4)
/** GM965 GM45 render standby register */
#define MCHBAR_RENDER_STANDBY 0x111B8
#define CRSTANDVID 0x11100
#define PXVFREQ_BASE 0x11110 /* P[0-15]VIDFREQ (0x1114c) (Ironlake) */
#define PXVFREQ_PX_MASK 0x7f000000
#define PXVFREQ_PX_SHIFT 24
#define VIDFREQ_BASE 0x11110
#define VIDFREQ1 0x11110 /* VIDFREQ1-4 (0x1111c) (Cantiga) */
#define VIDFREQ2 0x11114
#define VIDFREQ3 0x11118
#define VIDFREQ4 0x1111c
#define VIDFREQ_P0_MASK 0x1f000000
#define VIDFREQ_P0_SHIFT 24
#define VIDFREQ_P0_CSCLK_MASK 0x00f00000
#define VIDFREQ_P0_CSCLK_SHIFT 20
#define VIDFREQ_P0_CRCLK_MASK 0x000f0000
#define VIDFREQ_P0_CRCLK_SHIFT 16
#define VIDFREQ_P1_MASK 0x00001f00
#define VIDFREQ_P1_SHIFT 8
#define VIDFREQ_P1_CSCLK_MASK 0x000000f0
#define VIDFREQ_P1_CSCLK_SHIFT 4
#define VIDFREQ_P1_CRCLK_MASK 0x0000000f
#define INTTOEXT_BASE_ILK 0x11300
#define INTTOEXT_BASE 0x11120 /* INTTOEXT1-8 (0x1113c) */
#define INTTOEXT_MAP3_SHIFT 24
#define INTTOEXT_MAP3_MASK (0x1f << INTTOEXT_MAP3_SHIFT)
#define INTTOEXT_MAP2_SHIFT 16
#define INTTOEXT_MAP2_MASK (0x1f << INTTOEXT_MAP2_SHIFT)
#define INTTOEXT_MAP1_SHIFT 8
#define INTTOEXT_MAP1_MASK (0x1f << INTTOEXT_MAP1_SHIFT)
#define INTTOEXT_MAP0_SHIFT 0
#define INTTOEXT_MAP0_MASK (0x1f << INTTOEXT_MAP0_SHIFT)
#define MEMSWCTL 0x11170 /* Ironlake only */
#define MEMCTL_CMD_MASK 0xe000
#define MEMCTL_CMD_SHIFT 13
#define MEMCTL_CMD_RCLK_OFF 0
#define MEMCTL_CMD_RCLK_ON 1
#define MEMCTL_CMD_CHFREQ 2
#define MEMCTL_CMD_CHVID 3
#define MEMCTL_CMD_VMMOFF 4
#define MEMCTL_CMD_VMMON 5
#define MEMCTL_CMD_STS (1<<12) /* write 1 triggers command, clears
when command complete */
#define MEMCTL_FREQ_MASK 0x0f00 /* jitter, from 0-15 */
#define MEMCTL_FREQ_SHIFT 8
#define MEMCTL_SFCAVM (1<<7)
#define MEMCTL_TGT_VID_MASK 0x007f
#define MEMIHYST 0x1117c
#define MEMINTREN 0x11180 /* 16 bits */
#define MEMINT_RSEXIT_EN (1<<8)
#define MEMINT_CX_SUPR_EN (1<<7)
#define MEMINT_CONT_BUSY_EN (1<<6)
#define MEMINT_AVG_BUSY_EN (1<<5)
#define MEMINT_EVAL_CHG_EN (1<<4)
#define MEMINT_MON_IDLE_EN (1<<3)
#define MEMINT_UP_EVAL_EN (1<<2)
#define MEMINT_DOWN_EVAL_EN (1<<1)
#define MEMINT_SW_CMD_EN (1<<0)
#define MEMINTRSTR 0x11182 /* 16 bits */
#define MEM_RSEXIT_MASK 0xc000
#define MEM_RSEXIT_SHIFT 14
#define MEM_CONT_BUSY_MASK 0x3000
#define MEM_CONT_BUSY_SHIFT 12
#define MEM_AVG_BUSY_MASK 0x0c00
#define MEM_AVG_BUSY_SHIFT 10
#define MEM_EVAL_CHG_MASK 0x0300
#define MEM_EVAL_BUSY_SHIFT 8
#define MEM_MON_IDLE_MASK 0x00c0
#define MEM_MON_IDLE_SHIFT 6
#define MEM_UP_EVAL_MASK 0x0030
#define MEM_UP_EVAL_SHIFT 4
#define MEM_DOWN_EVAL_MASK 0x000c
#define MEM_DOWN_EVAL_SHIFT 2
#define MEM_SW_CMD_MASK 0x0003
#define MEM_INT_STEER_GFX 0
#define MEM_INT_STEER_CMR 1
#define MEM_INT_STEER_SMI 2
#define MEM_INT_STEER_SCI 3
#define MEMINTRSTS 0x11184
#define MEMINT_RSEXIT (1<<7)
#define MEMINT_CONT_BUSY (1<<6)
#define MEMINT_AVG_BUSY (1<<5)
#define MEMINT_EVAL_CHG (1<<4)
#define MEMINT_MON_IDLE (1<<3)
#define MEMINT_UP_EVAL (1<<2)
#define MEMINT_DOWN_EVAL (1<<1)
#define MEMINT_SW_CMD (1<<0)
#define MEMMODECTL 0x11190
#define MEMMODE_BOOST_EN (1<<31)
#define MEMMODE_BOOST_FREQ_MASK 0x0f000000 /* jitter for boost, 0-15 */
#define MEMMODE_BOOST_FREQ_SHIFT 24
#define MEMMODE_IDLE_MODE_MASK 0x00030000
#define MEMMODE_IDLE_MODE_SHIFT 16
#define MEMMODE_IDLE_MODE_EVAL 0
#define MEMMODE_IDLE_MODE_CONT 1
#define MEMMODE_HWIDLE_EN (1<<15)
#define MEMMODE_SWMODE_EN (1<<14)
#define MEMMODE_RCLK_GATE (1<<13)
#define MEMMODE_HW_UPDATE (1<<12)
#define MEMMODE_FSTART_MASK 0x00000f00 /* starting jitter, 0-15 */
#define MEMMODE_FSTART_SHIFT 8
#define MEMMODE_FMAX_MASK 0x000000f0 /* max jitter, 0-15 */
#define MEMMODE_FMAX_SHIFT 4
#define MEMMODE_FMIN_MASK 0x0000000f /* min jitter, 0-15 */
#define RCBMAXAVG 0x1119c
#define MEMSWCTL2 0x1119e /* Cantiga only */
#define SWMEMCMD_RENDER_OFF (0 << 13)
#define SWMEMCMD_RENDER_ON (1 << 13)
#define SWMEMCMD_SWFREQ (2 << 13)
#define SWMEMCMD_TARVID (3 << 13)
#define SWMEMCMD_VRM_OFF (4 << 13)
#define SWMEMCMD_VRM_ON (5 << 13)
#define CMDSTS (1<<12)
#define SFCAVM (1<<11)
#define SWFREQ_MASK 0x0380 /* P0-7 */
#define SWFREQ_SHIFT 7
#define TARVID_MASK 0x001f
#define MEMSTAT_CTG 0x111a0
#define RCBMINAVG 0x111a0
#define RCUPEI 0x111b0
#define RCDNEI 0x111b4
#define RSTDBYCTL 0x111b8
#define RCX_SW_EXIT (1<<23)
#define RSX_STATUS_MASK 0x00700000
#define VIDCTL 0x111c0
#define VIDSTS 0x111c8
#define VIDSTART 0x111cc /* 8 bits */
#define MEMSTAT_ILK 0x111f8
#define MEMSTAT_VID_MASK 0x7f00
#define MEMSTAT_VID_SHIFT 8
#define MEMSTAT_PSTATE_MASK 0x00f8
#define MEMSTAT_PSTATE_SHIFT 3
#define MEMSTAT_MON_ACTV (1<<2)
#define MEMSTAT_SRC_CTL_MASK 0x0003
#define MEMSTAT_SRC_CTL_CORE 0
#define MEMSTAT_SRC_CTL_TRB 1
#define MEMSTAT_SRC_CTL_THM 2
#define MEMSTAT_SRC_CTL_STDBY 3
#define RCPREVBSYTUPAVG 0x113b8
#define RCPREVBSYTDNAVG 0x113bc
#define PEG_BAND_GAP_DATA 0x14d68
/*

View File

@ -682,6 +682,7 @@ void i915_restore_display(struct drm_device *dev)
I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
I915_WRITE(PCH_PP_DIVISOR, dev_priv->savePP_DIVISOR);
I915_WRITE(PCH_PP_CONTROL, dev_priv->savePP_CONTROL);
I915_WRITE(RSTDBYCTL, dev_priv->saveRSTDBYCTL);
} else {
I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS);
I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL);
@ -745,11 +746,15 @@ int i915_save_state(struct drm_device *dev)
dev_priv->saveGTIMR = I915_READ(GTIMR);
dev_priv->saveFDI_RXA_IMR = I915_READ(FDI_RXA_IMR);
dev_priv->saveFDI_RXB_IMR = I915_READ(FDI_RXB_IMR);
dev_priv->saveRSTDBYCTL = I915_READ(RSTDBYCTL);
} else {
dev_priv->saveIER = I915_READ(IER);
dev_priv->saveIMR = I915_READ(IMR);
}
if (IS_IRONLAKE_M(dev))
ironlake_disable_drps(dev);
/* Cache mode state */
dev_priv->saveCACHE_MODE_0 = I915_READ(CACHE_MODE_0);
@ -820,6 +825,9 @@ int i915_restore_state(struct drm_device *dev)
/* Clock gating state */
intel_init_clock_gating(dev);
if (IS_IRONLAKE_M(dev))
ironlake_enable_drps(dev);
/* Cache mode state */
I915_WRITE (CACHE_MODE_0, dev_priv->saveCACHE_MODE_0 | 0xffff0000);

View File

@ -4616,6 +4616,91 @@ err_unref:
return NULL;
}
void ironlake_enable_drps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 rgvmodectl = I915_READ(MEMMODECTL), rgvswctl;
u8 fmax, fmin, fstart, vstart;
int i = 0;
/* 100ms RC evaluation intervals */
I915_WRITE(RCUPEI, 100000);
I915_WRITE(RCDNEI, 100000);
/* Set max/min thresholds to 90ms and 80ms respectively */
I915_WRITE(RCBMAXAVG, 90000);
I915_WRITE(RCBMINAVG, 80000);
I915_WRITE(MEMIHYST, 1);
/* Set up min, max, and cur for interrupt handling */
fmax = (rgvmodectl & MEMMODE_FMAX_MASK) >> MEMMODE_FMAX_SHIFT;
fmin = (rgvmodectl & MEMMODE_FMIN_MASK);
fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >>
MEMMODE_FSTART_SHIFT;
vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >>
PXVFREQ_PX_SHIFT;
dev_priv->max_delay = fstart; /* can't go to fmax w/o IPS */
dev_priv->min_delay = fmin;
dev_priv->cur_delay = fstart;
I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN);
/*
* Interrupts will be enabled in ironlake_irq_postinstall
*/
I915_WRITE(VIDSTART, vstart);
POSTING_READ(VIDSTART);
rgvmodectl |= MEMMODE_SWMODE_EN;
I915_WRITE(MEMMODECTL, rgvmodectl);
while (I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) {
if (i++ > 100) {
DRM_ERROR("stuck trying to change perf mode\n");
break;
}
msleep(1);
}
msleep(1);
rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
(fstart << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM;
I915_WRITE(MEMSWCTL, rgvswctl);
POSTING_READ(MEMSWCTL);
rgvswctl |= MEMCTL_CMD_STS;
I915_WRITE(MEMSWCTL, rgvswctl);
}
void ironlake_disable_drps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 rgvswctl;
u8 fstart;
/* Ack interrupts, disable EFC interrupt */
I915_WRITE(MEMINTREN, I915_READ(MEMINTREN) & ~MEMINT_EVAL_CHG_EN);
I915_WRITE(MEMINTRSTS, MEMINT_EVAL_CHG);
I915_WRITE(DEIER, I915_READ(DEIER) & ~DE_PCU_EVENT);
I915_WRITE(DEIIR, DE_PCU_EVENT);
I915_WRITE(DEIMR, I915_READ(DEIMR) | DE_PCU_EVENT);
/* Go back to the starting frequency */
fstart = (I915_READ(MEMMODECTL) & MEMMODE_FSTART_MASK) >>
MEMMODE_FSTART_SHIFT;
rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
(fstart << MEMCTL_FREQ_SHIFT);
I915_WRITE(MEMSWCTL, rgvswctl);
msleep(1);
rgvswctl |= MEMCTL_CMD_STS;
I915_WRITE(MEMSWCTL, rgvswctl);
msleep(1);
}
void intel_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@ -4685,8 +4770,8 @@ void intel_init_clock_gating(struct drm_device *dev)
if (obj_priv) {
I915_WRITE(PWRCTXA, obj_priv->gtt_offset | PWRCTX_EN);
I915_WRITE(MCHBAR_RENDER_STANDBY,
I915_READ(MCHBAR_RENDER_STANDBY) & ~RCX_SW_EXIT);
I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) &
~RCX_SW_EXIT);
}
}
}
@ -4799,11 +4884,6 @@ void intel_modeset_init(struct drm_device *dev)
DRM_DEBUG_KMS("%d display pipe%s available.\n",
num_pipe, num_pipe > 1 ? "s" : "");
if (IS_I85X(dev))
pci_read_config_word(dev->pdev, HPLLCC, &dev_priv->orig_clock);
else if (IS_I9XX(dev) || IS_G4X(dev))
pci_read_config_word(dev->pdev, GCFGC, &dev_priv->orig_clock);
for (i = 0; i < num_pipe; i++) {
intel_crtc_init(dev, i);
}
@ -4812,6 +4892,9 @@ void intel_modeset_init(struct drm_device *dev)
intel_init_clock_gating(dev);
if (IS_IRONLAKE_M(dev))
ironlake_enable_drps(dev);
INIT_WORK(&dev_priv->idle_work, intel_idle_update);
setup_timer(&dev_priv->idle_timer, intel_gpu_idle_timer,
(unsigned long)dev);
@ -4859,6 +4942,9 @@ void intel_modeset_cleanup(struct drm_device *dev)
drm_gem_object_unreference(dev_priv->pwrctx);
}
if (IS_IRONLAKE_M(dev))
ironlake_disable_drps(dev);
mutex_unlock(&dev->struct_mutex);
drm_mode_config_cleanup(dev);

View File

@ -209,6 +209,8 @@ extern void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
extern void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
u16 *blue, int regno);
extern void intel_init_clock_gating(struct drm_device *dev);
extern void ironlake_enable_drps(struct drm_device *dev);
extern void ironlake_disable_drps(struct drm_device *dev);
extern int intel_framebuffer_create(struct drm_device *dev,
struct drm_mode_fb_cmd *mode_cmd,